Merge commit 'f06dce2c1f0f3af78581e7574f65bfba843ddb6e' into merges

[unleashed.git] / contrib / libpcap / sockutils.c

/*
 * Copyright (c) 2002 - 2003
 * NetGroup, Politecnico di Torino (Italy)
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the Politecnico di Torino nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

/*
 * \file sockutils.c
 *
 * The goal of this file is to provide a common set of primitives for socket
 * manipulation.
 *
 * Although the socket interface defined in the RFC 2553 (and its updates)
 * is excellent, there are still differences between the behavior of those
 * routines on UN*X and Windows, and between UN*Xes.
 *
 * These calls provide an interface similar to the socket interface, but
 * that hides the differences between operating systems.  It does not
 * attempt to significantly improve on the socket interface in other
 * ways.
 */

#include <string.h>     /* for strerror() */
#include <errno.h>      /* for the errno variable */
#include <stdio.h>      /* for the stderr file */
#include <stdlib.h>     /* for malloc() and free() */
#ifdef HAVE_LIMITS_H
#include <limits.h>
#else
#define INT_MAX         2147483647
#endif

#include "portability.h"
#include "sockutils.h"

#ifdef _WIN32
  /*
   * Winsock initialization.
   *
   * Ask for WinSock 2.2.
   */
  #define WINSOCK_MAJOR_VERSION 2
  #define WINSOCK_MINOR_VERSION 2

  static int sockcount = 0;     /*!< Variable that allows calling the WSAStartup() only one time */
#endif

/* Some minor differences between UNIX and Win32 */
#ifdef _WIN32
  #define SHUT_WR SD_SEND       /* The control code for shutdown() is different in Win32 */
#endif

/* Size of the buffer that has to keep error messages */
#define SOCK_ERRBUF_SIZE 1024

/* Constants; used in order to keep strings here */
#define SOCKET_NO_NAME_AVAILABLE "No name available"
#define SOCKET_NO_PORT_AVAILABLE "No port available"
#define SOCKET_NAME_NULL_DAD "Null address (possibly DAD Phase)"

/****************************************************
 *                                                  *
 * Locally defined functions                        *
 *                                                  *
 ****************************************************/

static int sock_ismcastaddr(const struct sockaddr *saddr);

/****************************************************
 *                                                  *
 * Function bodies                                  *
 *                                                  *
 ****************************************************/

/*
 * \brief It retrieves the error message after an error occurred in the socket interface.
 *
 * This function is defined because of the different way errors are returned in UNIX
 * and Win32. This function provides a consistent way to retrieve the error message
 * (after a socket error occurred) on all the platforms.
 *
 * \param caller: a pointer to a user-allocated string which contains a message that has
 * to be printed *before* the true error message. It could be, for example, 'this error
 * comes from the recv() call at line 31'. It may be NULL.
 *
 * \param errbuf: a pointer to an user-allocated buffer that will contain the complete
 * error message. This buffer has to be at least 'errbuflen' in length.
 * It can be NULL; in this case the error cannot be printed.
 *
 * \param errbuflen: length of the buffer that will contains the error. The error message cannot be
 * larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
 *
 * \return No return values. The error message is returned in the 'string' parameter.
 */
void sock_geterror(const char *caller, char *errbuf, int errbuflen)
{
#ifdef _WIN32
        int retval;
        int code;
        TCHAR message[SOCK_ERRBUF_SIZE];        /* It will be char (if we're using ascii) or wchar_t (if we're using unicode) */

        if (errbuf == NULL)
                return;

        code = GetLastError();

        retval = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM | FORMAT_MESSAGE_IGNORE_INSERTS |
                FORMAT_MESSAGE_MAX_WIDTH_MASK,
                NULL, code, MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT),
                message, sizeof(message) / sizeof(TCHAR), NULL);

        if (retval == 0)
        {
                if ((caller) && (*caller))
                        pcap_snprintf(errbuf, errbuflen, "%sUnable to get the exact error message", caller);
                else
                        pcap_snprintf(errbuf, errbuflen, "Unable to get the exact error message");
                return;
        }
        else
        {
                if ((caller) && (*caller))
                        pcap_snprintf(errbuf, errbuflen, "%s%s (code %d)", caller, message, code);
                else
                        pcap_snprintf(errbuf, errbuflen, "%s (code %d)", message, code);
        }
#else
        char *message;

        if (errbuf == NULL)
                return;

        message = strerror(errno);

        if ((caller) && (*caller))
                pcap_snprintf(errbuf, errbuflen, "%s%s (code %d)", caller, message, errno);
        else
                pcap_snprintf(errbuf, errbuflen, "%s (code %d)", message, errno);
#endif
}

/*
 * \brief It initializes sockets.
 *
 * This function is pretty useless on UNIX, since socket initialization is not required.
 * However it is required on Win32. In UNIX, this function appears to be completely empty.
 *
 * \param errbuf: a pointer to an user-allocated buffer that will contain the complete
 * error message. This buffer has to be at least 'errbuflen' in length.
 * It can be NULL; in this case the error cannot be printed.
 *
 * \param errbuflen: length of the buffer that will contains the error. The error message cannot be
 * larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
 *
 * \return '0' if everything is fine, '-1' if some errors occurred. The error message is returned
 * in the 'errbuf' variable.
 */
int sock_init(char *errbuf, int errbuflen)
{
#ifdef _WIN32
        if (sockcount == 0)
        {
                WSADATA wsaData;                        /* helper variable needed to initialize Winsock */

                if (WSAStartup(MAKEWORD(WINSOCK_MAJOR_VERSION,
                    WINSOCK_MINOR_VERSION), &wsaData) != 0)
                {
                        if (errbuf)
                                pcap_snprintf(errbuf, errbuflen, "Failed to initialize Winsock\n");

                        WSACleanup();

                        return -1;
                }
        }

        sockcount++;
#endif

        return 0;
}

/*
 * \brief It deallocates sockets.
 *
 * This function is pretty useless on UNIX, since socket deallocation is not required.
 * However it is required on Win32. In UNIX, this function appears to be completely empty.
 *
 * \return No error values.
 */
void sock_cleanup(void)
{
#ifdef _WIN32
        sockcount--;

        if (sockcount == 0)
                WSACleanup();
#endif
}

/*
 * \brief It checks if the sockaddr variable contains a multicast address.
 *
 * \return '0' if the address is multicast, '-1' if it is not.
 */
static int sock_ismcastaddr(const struct sockaddr *saddr)
{
        if (saddr->sa_family == PF_INET)
        {
                struct sockaddr_in *saddr4 = (struct sockaddr_in *) saddr;
                if (IN_MULTICAST(ntohl(saddr4->sin_addr.s_addr))) return 0;
                else return -1;
        }
        else
        {
                struct sockaddr_in6 *saddr6 = (struct sockaddr_in6 *) saddr;
                if (IN6_IS_ADDR_MULTICAST(&saddr6->sin6_addr)) return 0;
                else return -1;
        }
}

/*
 * \brief It initializes a network connection both from the client and the server side.
 *
 * In case of a client socket, this function calls socket() and connect().
 * In the meanwhile, it checks for any socket error.
 * If an error occurs, it writes the error message into 'errbuf'.
 *
 * In case of a server socket, the function calls socket(), bind() and listen().
 *
 * This function is usually preceeded by the sock_initaddress().
 *
 * \param addrinfo: pointer to an addrinfo variable which will be used to
 * open the socket and such. This variable is the one returned by the previous call to
 * sock_initaddress().
 *
 * \param server: '1' if this is a server socket, '0' otherwise.
 *
 * \param nconn: number of the connections that are allowed to wait into the listen() call.
 * This value has no meanings in case of a client socket.
 *
 * \param errbuf: a pointer to an user-allocated buffer that will contain the complete
 * error message. This buffer has to be at least 'errbuflen' in length.
 * It can be NULL; in this case the error cannot be printed.
 *
 * \param errbuflen: length of the buffer that will contains the error. The error message cannot be
 * larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
 *
 * \return the socket that has been opened (that has to be used in the following sockets calls)
 * if everything is fine, '0' if some errors occurred. The error message is returned
 * in the 'errbuf' variable.
 */
SOCKET sock_open(struct addrinfo *addrinfo, int server, int nconn, char *errbuf, int errbuflen)
{
        SOCKET sock;

        sock = socket(addrinfo->ai_family, addrinfo->ai_socktype, addrinfo->ai_protocol);
        if (sock == -1)
        {
                sock_geterror("socket(): ", errbuf, errbuflen);
                return -1;
        }


        /* This is a server socket */
        if (server)
        {
#ifdef BSD
                /*
                 * Force the use of IPv6-only addresses; in BSD you can accept both v4 and v6
                 * connections if you have a "NULL" pointer as the nodename in the getaddrinfo()
                 * This behavior is not clear in the RFC 2553, so each system implements the
                 * bind() differently from this point of view
                 */
                if (addrinfo->ai_family == PF_INET6)
                {
                        int on;

                        if (setsockopt(sock, IPPROTO_IPV6, IPV6_BINDV6ONLY, (char *)&on, sizeof (int)) == -1)
                        {
                                if (errbuf)
                                        pcap_snprintf(errbuf, errbuflen, "setsockopt(IPV6_BINDV6ONLY)");
                                return -1;
                        }
                }
#endif

                /* WARNING: if the address is a mcast one, I should place the proper Win32 code here */
                if (bind(sock, addrinfo->ai_addr, (int) addrinfo->ai_addrlen) != 0)
                {
                        sock_geterror("bind(): ", errbuf, errbuflen);
                        return -1;
                }

                if (addrinfo->ai_socktype == SOCK_STREAM)
                        if (listen(sock, nconn) == -1)
                        {
                                sock_geterror("listen(): ", errbuf, errbuflen);
                                return -1;
                        }

                /* server side ended */
                return sock;
        }
        else    /* we're the client */
        {
                struct addrinfo *tempaddrinfo;
                char *errbufptr;
                size_t bufspaceleft;

                tempaddrinfo = addrinfo;
                errbufptr = errbuf;
                bufspaceleft = errbuflen;
                *errbufptr = 0;

                /*
                 * We have to loop though all the addinfo returned.
                 * For instance, we can have both IPv6 and IPv4 addresses, but the service we're trying
                 * to connect to is unavailable in IPv6, so we have to try in IPv4 as well
                 */
                while (tempaddrinfo)
                {

                        if (connect(sock, tempaddrinfo->ai_addr, (int) tempaddrinfo->ai_addrlen) == -1)
                        {
                                size_t msglen;
                                char TmpBuffer[100];
                                char SocketErrorMessage[SOCK_ERRBUF_SIZE];

                                /*
                                 * We have to retrieve the error message before any other socket call completes, otherwise
                                 * the error message is lost
                                 */
                                sock_geterror(NULL, SocketErrorMessage, sizeof(SocketErrorMessage));

                                /* Returns the numeric address of the host that triggered the error */
                                sock_getascii_addrport((struct sockaddr_storage *) tempaddrinfo->ai_addr, TmpBuffer, sizeof(TmpBuffer), NULL, 0, NI_NUMERICHOST, TmpBuffer, sizeof(TmpBuffer));

                                pcap_snprintf(errbufptr, bufspaceleft,
                                    "Is the server properly installed on %s?  connect() failed: %s", TmpBuffer, SocketErrorMessage);

                                /* In case more then one 'connect' fails, we manage to keep all the error messages */
                                msglen = strlen(errbufptr);

                                errbufptr[msglen] = ' ';
                                errbufptr[msglen + 1] = 0;

                                bufspaceleft = bufspaceleft - (msglen + 1);
                                errbufptr += (msglen + 1);

                                tempaddrinfo = tempaddrinfo->ai_next;
                        }
                        else
                                break;
                }

                /*
                 * Check how we exit from the previous loop
                 * If tempaddrinfo is equal to NULL, it means that all the connect() failed.
                 */
                if (tempaddrinfo == NULL)
                {
                        closesocket(sock);
                        return -1;
                }
                else
                        return sock;
        }
}

/*
 * \brief Closes the present (TCP and UDP) socket connection.
 *
 * This function sends a shutdown() on the socket in order to disable send() calls
 * (while recv() ones are still allowed). Then, it closes the socket.
 *
 * \param sock: the socket identifier of the connection that has to be closed.
 *
 * \param errbuf: a pointer to an user-allocated buffer that will contain the complete
 * error message. This buffer has to be at least 'errbuflen' in length.
 * It can be NULL; in this case the error cannot be printed.
 *
 * \param errbuflen: length of the buffer that will contains the error. The error message cannot be
 * larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
 *
 * \return '0' if everything is fine, '-1' if some errors occurred. The error message is returned
 * in the 'errbuf' variable.
 */
int sock_close(SOCKET sock, char *errbuf, int errbuflen)
{
        /*
         * SHUT_WR: subsequent calls to the send function are disallowed.
         * For TCP sockets, a FIN will be sent after all data is sent and
         * acknowledged by the Server.
         */
        if (shutdown(sock, SHUT_WR))
        {
                sock_geterror("shutdown(): ", errbuf, errbuflen);
                /* close the socket anyway */
                closesocket(sock);
                return -1;
        }

        closesocket(sock);
        return 0;
}

/*
 * \brief Checks that the address, port and flags given are valids and it returns an 'addrinfo' structure.
 *
 * This function basically calls the getaddrinfo() calls, and it performs a set of sanity checks
 * to control that everything is fine (e.g. a TCP socket cannot have a mcast address, and such).
 * If an error occurs, it writes the error message into 'errbuf'.
 *
 * \param host: a pointer to a string identifying the host. It can be
 * a host name, a numeric literal address, or NULL or "" (useful
 * in case of a server socket which has to bind to all addresses).
 *
 * \param port: a pointer to a user-allocated buffer containing the network port to use.
 *
 * \param hints: an addrinfo variable (passed by reference) containing the flags needed to create the
 * addrinfo structure appropriately.
 *
 * \param addrinfo: it represents the true returning value. This is a pointer to an addrinfo variable
 * (passed by reference), which will be allocated by this function and returned back to the caller.
 * This variable will be used in the next sockets calls.
 *
 * \param errbuf: a pointer to an user-allocated buffer that will contain the complete
 * error message. This buffer has to be at least 'errbuflen' in length.
 * It can be NULL; in this case the error cannot be printed.
 *
 * \param errbuflen: length of the buffer that will contains the error. The error message cannot be
 * larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
 *
 * \return '0' if everything is fine, '-1' if some errors occurred. The error message is returned
 * in the 'errbuf' variable. The addrinfo variable that has to be used in the following sockets calls is
 * returned into the addrinfo parameter.
 *
 * \warning The 'addrinfo' variable has to be deleted by the programmer by calling freeaddrinfo() when
 * it is no longer needed.
 *
 * \warning This function requires the 'hints' variable as parameter. The semantic of this variable is the same
 * of the one of the corresponding variable used into the standard getaddrinfo() socket function. We suggest
 * the programmer to look at that function in order to set the 'hints' variable appropriately.
 */
int sock_initaddress(const char *host, const char *port,
    struct addrinfo *hints, struct addrinfo **addrinfo, char *errbuf, int errbuflen)
{
        int retval;

        retval = getaddrinfo(host, port, hints, addrinfo);
        if (retval != 0)
        {
                /*
                 * if the getaddrinfo() fails, you have to use gai_strerror(), instead of using the standard
                 * error routines (errno) in UNIX; Winsock suggests using the GetLastError() instead.
                 */
                if (errbuf)
                {
#ifdef _WIN32
                        sock_geterror("getaddrinfo(): ", errbuf, errbuflen);
#else
                        pcap_snprintf(errbuf, errbuflen, "getaddrinfo() %s", gai_strerror(retval));
#endif
                }
                return -1;
        }
        /*
         * \warning SOCKET: I should check all the accept() in order to bind to all addresses in case
         * addrinfo has more han one pointers
         */

        /*
         * This software only supports PF_INET and PF_INET6.
         *
         * XXX - should we just check that at least *one* address is
         * either PF_INET or PF_INET6, and, when using the list,
         * ignore all addresses that are neither?  (What, no IPX
         * support? :-))
         */
        if (((*addrinfo)->ai_family != PF_INET) &&
            ((*addrinfo)->ai_family != PF_INET6))
        {
                if (errbuf)
                        pcap_snprintf(errbuf, errbuflen, "getaddrinfo(): socket type not supported");
                return -1;
        }

        /*
         * You can't do multicast (or broadcast) TCP.
         */
        if (((*addrinfo)->ai_socktype == SOCK_STREAM) &&
            (sock_ismcastaddr((*addrinfo)->ai_addr) == 0))
        {
                if (errbuf)
                        pcap_snprintf(errbuf, errbuflen, "getaddrinfo(): multicast addresses are not valid when using TCP streams");
                return -1;
        }

        return 0;
}

/*
 * \brief It sends the amount of data contained into 'buffer' on the given socket.
 *
 * This function basically calls the send() socket function and it checks that all
 * the data specified in 'buffer' (of size 'size') will be sent. If an error occurs,
 * it writes the error message into 'errbuf'.
 * In case the socket buffer does not have enough space, it loops until all data
 * has been sent.
 *
 * \param socket: the connected socket currently opened.
 *
 * \param buffer: a char pointer to a user-allocated buffer in which data is contained.
 *
 * \param size: number of bytes that have to be sent.
 *
 * \param errbuf: a pointer to an user-allocated buffer that will contain the complete
 * error message. This buffer has to be at least 'errbuflen' in length.
 * It can be NULL; in this case the error cannot be printed.
 *
 * \param errbuflen: length of the buffer that will contains the error. The error message cannot be
 * larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
 *
 * \return '0' if everything is fine, '-1' if some errors occurred. The error message is returned
 * in the 'errbuf' variable.
 */
int sock_send(SOCKET socket, const char *buffer, int size, char *errbuf, int errbuflen)
{
        int nsent;

send:
#ifdef linux
        /*
         * Another pain... in Linux there's this flag
         * MSG_NOSIGNAL
         * Requests not to send SIGPIPE on errors on stream-oriented
         * sockets when the other end breaks the connection.
         * The EPIPE error is still returned.
         */
        nsent = send(socket, buffer, size, MSG_NOSIGNAL);
#else
        nsent = send(socket, buffer, size, 0);
#endif

        if (nsent == -1)
        {
                sock_geterror("send(): ", errbuf, errbuflen);
                return -1;
        }

        if (nsent != size)
        {
                size -= nsent;
                buffer += nsent;
                goto send;
        }

        return 0;
}

/*
 * \brief It copies the amount of data contained into 'buffer' into 'tempbuf'.
 * and it checks for buffer overflows.
 *
 * This function basically copies 'size' bytes of data contained into 'buffer'
 * into 'tempbuf', starting at offset 'offset'. Before that, it checks that the
 * resulting buffer will not be larger  than 'totsize'. Finally, it updates
 * the 'offset' variable in order to point to the first empty location of the buffer.
 *
 * In case the function is called with 'checkonly' equal to 1, it does not copy
 * the data into the buffer. It only checks for buffer overflows and it updates the
 * 'offset' variable. This mode can be useful when the buffer already contains the
 * data (maybe because the producer writes directly into the target buffer), so
 * only the buffer overflow check has to be made.
 * In this case, both 'buffer' and 'tempbuf' can be NULL values.
 *
 * This function is useful in case the userland application does not know immediately
 * all the data it has to write into the socket. This function provides a way to create
 * the "stream" step by step, appending the new data to the old one. Then, when all the
 * data has been bufferized, the application can call the sock_send() function.
 *
 * \param buffer: a char pointer to a user-allocated buffer that keeps the data
 * that has to be copied.
 *
 * \param size: number of bytes that have to be copied.
 *
 * \param tempbuf: user-allocated buffer (of size 'totsize') in which data
 * has to be copied.
 *
 * \param offset: an index into 'tempbuf' which keeps the location of its first
 * empty location.
 *
 * \param totsize: total size of the buffer in which data is being copied.
 *
 * \param checkonly: '1' if we do not want to copy data into the buffer and we
 * want just do a buffer ovreflow control, '0' if data has to be copied as well.
 *
 * \param errbuf: a pointer to an user-allocated buffer that will contain the complete
 * error message. This buffer has to be at least 'errbuflen' in length.
 * It can be NULL; in this case the error cannot be printed.
 *
 * \param errbuflen: length of the buffer that will contains the error. The error message cannot be
 * larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
 *
 * \return '0' if everything is fine, '-1' if some errors occurred. The error message
 * is returned in the 'errbuf' variable. When the function returns, 'tempbuf' will
 * have the new string appended, and 'offset' will keep the length of that buffer.
 * In case of 'checkonly == 1', data is not copied, but 'offset' is updated in any case.
 *
 * \warning This function assumes that the buffer in which data has to be stored is
 * large 'totbuf' bytes.
 *
 * \warning In case of 'checkonly', be carefully to call this function *before* copying
 * the data into the buffer. Otherwise, the control about the buffer overflow is useless.
 */
int sock_bufferize(const char *buffer, int size, char *tempbuf, int *offset, int totsize, int checkonly, char *errbuf, int errbuflen)
{
        if ((*offset + size) > totsize)
        {
                if (errbuf)
                        pcap_snprintf(errbuf, errbuflen, "Not enough space in the temporary send buffer.");
                return -1;
        }

        if (!checkonly)
                memcpy(tempbuf + (*offset), buffer, size);

        (*offset) += size;

        return 0;
}

/*
 * \brief It waits on a connected socket and it manages to receive data.
 *
 * This function basically calls the recv() socket function and it checks that no
 * error occurred. If that happens, it writes the error message into 'errbuf'.
 *
 * This function changes its behavior according to the 'receiveall' flag: if we
 * want to receive exactly 'size' byte, it loops on the recv()  until all the requested
 * data is arrived. Otherwise, it returns the data currently available.
 *
 * In case the socket does not have enough data available, it cycles on the recv()
 * until the requested data (of size 'size') is arrived.
 * In this case, it blocks until the number of bytes read is equal to 'size'.
 *
 * \param sock: the connected socket currently opened.
 *
 * \param buffer: a char pointer to a user-allocated buffer in which data has to be stored
 *
 * \param size: size of the allocated buffer. WARNING: this indicates the number of bytes
 * that we are expecting to be read.
 *
 * \param receiveall: if '0' (or SOCK_RECEIVEALL_NO), it returns as soon as some data
 * is ready; otherwise, (or SOCK_RECEIVEALL_YES) it waits until 'size' data has been
 * received (in case the socket does not have enough data available).
 *
 * \param errbuf: a pointer to an user-allocated buffer that will contain the complete
 * error message. This buffer has to be at least 'errbuflen' in length.
 * It can be NULL; in this case the error cannot be printed.
 *
 * \param errbuflen: length of the buffer that will contains the error. The error message cannot be
 * larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
 *
 * \return the number of bytes read if everything is fine, '-1' if some errors occurred.
 * The error message is returned in the 'errbuf' variable.
 */

/*
 * On UN*X, recv() returns ssize_t.
 * On Windows, there *is* no ssize_t, and it returns an int.
 * Define ssize_t as int on Windows so we can use it as the return value
 * from recv().
 */
#ifdef _WIN32
typedef int ssize_t;
#endif

int sock_recv(SOCKET sock, void *buffer, size_t size, int receiveall,
    char *errbuf, int errbuflen)
{
        char *bufp = buffer;
        int remaining;
        ssize_t nread;

        if (size == 0)
        {
                SOCK_ASSERT("I have been requested to read zero bytes", 1);
                return 0;
        }
        if (size > INT_MAX)
        {
                pcap_snprintf(errbuf, errbuflen, "Can't read more than %u bytes with sock_recv",
                    INT_MAX);
                return -1;
        }

        bufp = (char *) buffer;
        remaining = (int) size;

        /*
         * We don't use MSG_WAITALL because it's not supported in
         * Win32.
         */
        for (;;) {
                nread = recv(sock, bufp, remaining, 0);

                if (nread == -1)
                {
#ifndef _WIN32
                        if (errno == EINTR)
                                return -3;
#endif
                        sock_geterror("recv(): ", errbuf, errbuflen);
                        return -1;
                }

                if (nread == 0)
                {
                        if (errbuf)
                        {
                                pcap_snprintf(errbuf, errbuflen,
                                    "The other host terminated the connection.");
                        }
                        return -1;
                }

                /*
                 * Do we want to read the amount requested, or just return
                 * what we got?
                 */
                if (!receiveall)
                {
                        /*
                         * Just return what we got.
                         */
                        return (int) nread;
                }

                bufp += nread;
                remaining -= nread;

                if (remaining == 0)
                        return (int) size;
        }
}

/*
 * \brief It discards N bytes that are currently waiting to be read on the current socket.
 *
 * This function is useful in case we receive a message we cannot understand (e.g.
 * wrong version number when receiving a network packet), so that we have to discard all
 * data before reading a new message.
 *
 * This function will read 'size' bytes from the socket and discard them.
 * It defines an internal buffer in which data will be copied; however, in case
 * this buffer is not large enough, it will cycle in order to read everything as well.
 *
 * \param sock: the connected socket currently opened.
 *
 * \param size: number of bytes that have to be discarded.
 *
 * \param errbuf: a pointer to an user-allocated buffer that will contain the complete
 * error message. This buffer has to be at least 'errbuflen' in length.
 * It can be NULL; in this case the error cannot be printed.
 *
 * \param errbuflen: length of the buffer that will contains the error. The error message cannot be
 * larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
 *
 * \return '0' if everything is fine, '-1' if some errors occurred.
 * The error message is returned in the 'errbuf' variable.
 */
int sock_discard(SOCKET sock, int size, char *errbuf, int errbuflen)
{
#define TEMP_BUF_SIZE 32768

        char buffer[TEMP_BUF_SIZE];             /* network buffer, to be used when the message is discarded */

        /*
         * A static allocation avoids the need of a 'malloc()' each time we want to discard a message
         * Our feeling is that a buffer if 32KB is enough for most of the application;
         * in case this is not enough, the "while" loop discards the message by calling the
         * sockrecv() several times.
         * We do not want to create a bigger variable because this causes the program to exit on
         * some platforms (e.g. BSD)
         */
        while (size > TEMP_BUF_SIZE)
        {
                if (sock_recv(sock, buffer, TEMP_BUF_SIZE, SOCK_RECEIVEALL_YES, errbuf, errbuflen) == -1)
                        return -1;

                size -= TEMP_BUF_SIZE;
        }

        /*
         * If there is still data to be discarded
         * In this case, the data can fit into the temporary buffer
         */
        if (size)
        {
                if (sock_recv(sock, buffer, size, SOCK_RECEIVEALL_YES, errbuf, errbuflen) == -1)
                        return -1;
        }

        SOCK_ASSERT("I'm currently discarding data\n", 1);

        return 0;
}

/*
 * \brief Checks that one host (identified by the sockaddr_storage structure) belongs to an 'allowed list'.
 *
 * This function is useful after an accept() call in order to check if the connecting
 * host is allowed to connect to me. To do that, we have a buffer that keeps the list of the
 * allowed host; this function checks the sockaddr_storage structure of the connecting host
 * against this host list, and it returns '0' is the host is included in this list.
 *
 * \param hostlist: pointer to a string that contains the list of the allowed host.
 *
 * \param sep: a string that keeps the separators used between the hosts (for example the
 * space character) in the host list.
 *
 * \param from: a sockaddr_storage structure, as it is returned by the accept() call.
 *
 * \param errbuf: a pointer to an user-allocated buffer that will contain the complete
 * error message. This buffer has to be at least 'errbuflen' in length.
 * It can be NULL; in this case the error cannot be printed.
 *
 * \param errbuflen: length of the buffer that will contains the error. The error message cannot be
 * larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
 *
 * \return It returns:
 * - '1' if the host list is empty
 * - '0' if the host belongs to the host list (and therefore it is allowed to connect)
 * - '-1' in case the host does not belong to the host list (and therefore it is not allowed to connect
 * - '-2' in case or error. The error message is returned in the 'errbuf' variable.
 */
int sock_check_hostlist(char *hostlist, const char *sep, struct sockaddr_storage *from, char *errbuf, int errbuflen)
{
        /* checks if the connecting host is among the ones allowed */
        if ((hostlist) && (hostlist[0]))
        {
                char *token;                                    /* temp, needed to separate items into the hostlist */
                struct addrinfo *addrinfo, *ai_next;
                char *temphostlist;
                char *lasts;

                /*
                 * The problem is that strtok modifies the original variable by putting '0' at the end of each token
                 * So, we have to create a new temporary string in which the original content is kept
                 */
                temphostlist = strdup(hostlist);
                if (temphostlist == NULL)
                {
                        sock_geterror("sock_check_hostlist(), malloc() failed", errbuf, errbuflen);
                        return -2;
                }

                token = pcap_strtok_r(temphostlist, sep, &lasts);

                /* it avoids a warning in the compilation ('addrinfo used but not initialized') */
                addrinfo = NULL;

                while (token != NULL)
                {
                        struct addrinfo hints;
                        int retval;

                        addrinfo = NULL;
                        memset(&hints, 0, sizeof(struct addrinfo));
                        hints.ai_family = PF_UNSPEC;
                        hints.ai_socktype = SOCK_STREAM;

                        retval = getaddrinfo(token, "0", &hints, &addrinfo);
                        if (retval != 0)
                        {
                                if (errbuf)
                                        pcap_snprintf(errbuf, errbuflen, "getaddrinfo() %s", gai_strerror(retval));

                                SOCK_ASSERT(errbuf, 1);

                                /* Get next token */
                                token = pcap_strtok_r(NULL, sep, &lasts);
                                continue;
                        }

                        /* ai_next is required to preserve the content of addrinfo, in order to deallocate it properly */
                        ai_next = addrinfo;
                        while (ai_next)
                        {
                                if (sock_cmpaddr(from, (struct sockaddr_storage *) ai_next->ai_addr) == 0)
                                {
                                        free(temphostlist);
                                        return 0;
                                }

                                /*
                                 * If we are here, it means that the current address does not matches
                                 * Let's try with the next one in the header chain
                                 */
                                ai_next = ai_next->ai_next;
                        }

                        freeaddrinfo(addrinfo);
                        addrinfo = NULL;

                        /* Get next token */
                        token = pcap_strtok_r(NULL, sep, &lasts);
                }

                if (addrinfo)
                {
                        freeaddrinfo(addrinfo);
                        addrinfo = NULL;
                }

                if (errbuf)
                        pcap_snprintf(errbuf, errbuflen, "The host is not in the allowed host list. Connection refused.");

                free(temphostlist);
                return -1;
        }

        /* No hostlist, so we have to return 'empty list' */
        return 1;
}

/*
 * \brief Compares two addresses contained into two sockaddr_storage structures.
 *
 * This function is useful to compare two addresses, given their internal representation,
 * i.e. an sockaddr_storage structure.
 *
 * The two structures do not need to be sockaddr_storage; you can have both 'sockaddr_in' and
 * sockaddr_in6, properly acsted in order to be compliant to the function interface.
 *
 * This function will return '0' if the two addresses matches, '-1' if not.
 *
 * \param first: a sockaddr_storage structure, (for example the one that is returned by an
 * accept() call), containing the first address to compare.
 *
 * \param second: a sockaddr_storage structure containing the second address to compare.
 *
 * \return '0' if the addresses are equal, '-1' if they are different.
 */
int sock_cmpaddr(struct sockaddr_storage *first, struct sockaddr_storage *second)
{
        if (first->ss_family == second->ss_family)
        {
                if (first->ss_family == AF_INET)
                {
                        if (memcmp(&(((struct sockaddr_in *) first)->sin_addr),
                                &(((struct sockaddr_in *) second)->sin_addr),
                                sizeof(struct in_addr)) == 0)
                                return 0;
                }
                else /* address family is AF_INET6 */
                {
                        if (memcmp(&(((struct sockaddr_in6 *) first)->sin6_addr),
                                &(((struct sockaddr_in6 *) second)->sin6_addr),
                                sizeof(struct in6_addr)) == 0)
                                return 0;
                }
        }

        return -1;
}

/*
 * \brief It gets the address/port the system picked for this socket (on connected sockets).
 *
 * It is used to return the address and port the server picked for our socket on the local machine.
 * It works only on:
 * - connected sockets
 * - server sockets
 *
 * On unconnected client sockets it does not work because the system dynamically chooses a port
 * only when the socket calls a send() call.
 *
 * \param sock: the connected socket currently opened.
 *
 * \param address: it contains the address that will be returned by the function. This buffer
 * must be properly allocated by the user. The address can be either literal or numeric depending
 * on the value of 'Flags'.
 *
 * \param addrlen: the length of the 'address' buffer.
 *
 * \param port: it contains the port that will be returned by the function. This buffer
 * must be properly allocated by the user.
 *
 * \param portlen: the length of the 'port' buffer.
 *
 * \param flags: a set of flags (the ones defined into the getnameinfo() standard socket function)
 * that determine if the resulting address must be in numeric / literal form, and so on.
 *
 * \param errbuf: a pointer to an user-allocated buffer that will contain the complete
 * error message. This buffer has to be at least 'errbuflen' in length.
 * It can be NULL; in this case the error cannot be printed.
 *
 * \param errbuflen: length of the buffer that will contains the error. The error message cannot be
 * larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
 *
 * \return It returns '-1' if this function succeeds, '0' otherwise.
 * The address and port corresponding are returned back in the buffers 'address' and 'port'.
 * In any case, the returned strings are '0' terminated.
 *
 * \warning If the socket is using a connectionless protocol, the address may not be available
 * until I/O occurs on the socket.
 */
int sock_getmyinfo(SOCKET sock, char *address, int addrlen, char *port, int portlen, int flags, char *errbuf, int errbuflen)
{
        struct sockaddr_storage mysockaddr;
        socklen_t sockaddrlen;


        sockaddrlen = sizeof(struct sockaddr_storage);

        if (getsockname(sock, (struct sockaddr *) &mysockaddr, &sockaddrlen) == -1)
        {
                sock_geterror("getsockname(): ", errbuf, errbuflen);
                return 0;
        }
        else
        {
                /* Returns the numeric address of the host that triggered the error */
                return sock_getascii_addrport(&mysockaddr, address, addrlen, port, portlen, flags, errbuf, errbuflen);
        }

        return 0;
}

/*
 * \brief It retrieves two strings containing the address and the port of a given 'sockaddr' variable.
 *
 * This function is basically an extended version of the inet_ntop(), which does not exist in
 * Winsock because the same result can be obtained by using the getnameinfo().
 * However, differently from inet_ntop(), this function is able to return also literal names
 * (e.g. 'localhost') dependently from the 'Flags' parameter.
 *
 * The function accepts a sockaddr_storage variable (which can be returned by several functions
 * like bind(), connect(), accept(), and more) and it transforms its content into a 'human'
 * form. So, for instance, it is able to translate an hex address (stored in binary form) into
 * a standard IPv6 address like "::1".
 *
 * The behavior of this function depends on the parameters we have in the 'Flags' variable, which
 * are the ones allowed in the standard getnameinfo() socket function.
 *
 * \param sockaddr: a 'sockaddr_in' or 'sockaddr_in6' structure containing the address that
 * need to be translated from network form into the presentation form. This structure must be
 * zero-ed prior using it, and the address family field must be filled with the proper value.
 * The user must cast any 'sockaddr_in' or 'sockaddr_in6' structures to 'sockaddr_storage' before
 * calling this function.
 *
 * \param address: it contains the address that will be returned by the function. This buffer
 * must be properly allocated by the user. The address can be either literal or numeric depending
 * on the value of 'Flags'.
 *
 * \param addrlen: the length of the 'address' buffer.
 *
 * \param port: it contains the port that will be returned by the function. This buffer
 * must be properly allocated by the user.
 *
 * \param portlen: the length of the 'port' buffer.
 *
 * \param flags: a set of flags (the ones defined into the getnameinfo() standard socket function)
 * that determine if the resulting address must be in numeric / literal form, and so on.
 *
 * \param errbuf: a pointer to an user-allocated buffer that will contain the complete
 * error message. This buffer has to be at least 'errbuflen' in length.
 * It can be NULL; in this case the error cannot be printed.
 *
 * \param errbuflen: length of the buffer that will contains the error. The error message cannot be
 * larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
 *
 * \return It returns '-1' if this function succeeds, '0' otherwise.
 * The address and port corresponding to the given SockAddr are returned back in the buffers 'address'
 * and 'port'.
 * In any case, the returned strings are '0' terminated.
 */
int sock_getascii_addrport(const struct sockaddr_storage *sockaddr, char *address, int addrlen, char *port, int portlen, int flags, char *errbuf, int errbuflen)
{
        socklen_t sockaddrlen;
        int retval;                                     /* Variable that keeps the return value; */

        retval = -1;

#ifdef _WIN32
        if (sockaddr->ss_family == AF_INET)
                sockaddrlen = sizeof(struct sockaddr_in);
        else
                sockaddrlen = sizeof(struct sockaddr_in6);
#else
        sockaddrlen = sizeof(struct sockaddr_storage);
#endif

        if ((flags & NI_NUMERICHOST) == 0)      /* Check that we want literal names */
        {
                if ((sockaddr->ss_family == AF_INET6) &&
                        (memcmp(&((struct sockaddr_in6 *) sockaddr)->sin6_addr, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", sizeof(struct in6_addr)) == 0))
                {
                        if (address)
                                strlcpy(address, SOCKET_NAME_NULL_DAD, addrlen);
                        return retval;
                }
        }

        if (getnameinfo((struct sockaddr *) sockaddr, sockaddrlen, address, addrlen, port, portlen, flags) != 0)
        {
                /* If the user wants to receive an error message */
                if (errbuf)
                {
                        sock_geterror("getnameinfo(): ", errbuf, errbuflen);
                        errbuf[errbuflen - 1] = 0;
                }

                if (address)
                {
                        strlcpy(address, SOCKET_NO_NAME_AVAILABLE, addrlen);
                        address[addrlen - 1] = 0;
                }

                if (port)
                {
                        strlcpy(port, SOCKET_NO_PORT_AVAILABLE, portlen);
                        port[portlen - 1] = 0;
                }

                retval = 0;
        }

        return retval;
}

/*
 * \brief It translates an address from the 'presentation' form into the 'network' form.
 *
 * This function basically replaces inet_pton(), which does not exist in Winsock because
 * the same result can be obtained by using the getaddrinfo().
 * An additional advantage is that 'Address' can be both a numeric address (e.g. '127.0.0.1',
 * like in inet_pton() ) and a literal name (e.g. 'localhost').
 *
 * This function does the reverse job of sock_getascii_addrport().
 *
 * \param address: a zero-terminated string which contains the name you have to
 * translate. The name can be either literal (e.g. 'localhost') or numeric (e.g. '::1').
 *
 * \param sockaddr: a user-allocated sockaddr_storage structure which will contains the
 * 'network' form of the requested address.
 *
 * \param addr_family: a constant which can assume the following values:
 * - 'AF_INET' if we want to ping an IPv4 host
 * - 'AF_INET6' if we want to ping an IPv6 host
 * - 'AF_UNSPEC' if we do not have preferences about the protocol used to ping the host
 *
 * \param errbuf: a pointer to an user-allocated buffer that will contain the complete
 * error message. This buffer has to be at least 'errbuflen' in length.
 * It can be NULL; in this case the error cannot be printed.
 *
 * \param errbuflen: length of the buffer that will contains the error. The error message cannot be
 * larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
 *
 * \return '-1' if the translation succeeded, '-2' if there was some non critical error, '0'
 * otherwise. In case it fails, the content of the SockAddr variable remains unchanged.
 * A 'non critical error' can occur in case the 'Address' is a literal name, which can be mapped
 * to several network addresses (e.g. 'foo.bar.com' => '10.2.2.2' and '10.2.2.3'). In this case
 * the content of the SockAddr parameter will be the address corresponding to the first mapping.
 *
 * \warning The sockaddr_storage structure MUST be allocated by the user.
 */
int sock_present2network(const char *address, struct sockaddr_storage *sockaddr, int addr_family, char *errbuf, int errbuflen)
{
        int retval;
        struct addrinfo *addrinfo;
        struct addrinfo hints;

        memset(&hints, 0, sizeof(hints));

        hints.ai_family = addr_family;

        if ((retval = sock_initaddress(address, "22222" /* fake port */, &hints, &addrinfo, errbuf, errbuflen)) == -1)
                return 0;

        if (addrinfo->ai_family == PF_INET)
                memcpy(sockaddr, addrinfo->ai_addr, sizeof(struct sockaddr_in));
        else
                memcpy(sockaddr, addrinfo->ai_addr, sizeof(struct sockaddr_in6));

        if (addrinfo->ai_next != NULL)
        {
                freeaddrinfo(addrinfo);

                if (errbuf)
                        pcap_snprintf(errbuf, errbuflen, "More than one socket requested; using the first one returned");
                return -2;
        }

        freeaddrinfo(addrinfo);
        return -1;
}