usr/src/cmd/ldap/ns_ldap/idsconfig.sh

   1 #!/bin/sh
   2 #
   3 # CDDL HEADER START
   4 #
   5 # The contents of this file are subject to the terms of the
   6 # Common Development and Distribution License (the "License").
   7 # You may not use this file except in compliance with the License.
   8 #
   9 # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
  10 # or http://www.opensolaris.org/os/licensing.
  11 # See the License for the specific language governing permissions
  12 # and limitations under the License.
  13 #
  14 # When distributing Covered Code, include this CDDL HEADER in each
  15 # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  16 # If applicable, add the following below this CDDL HEADER, with the
  17 # fields enclosed by brackets "[]" replaced with your own identifying
  18 # information: Portions Copyright [yyyy] [name of copyright owner]
  19 #
  20 # CDDL HEADER END
  21 #
  22 #
  23 # idsconfig -- script to setup iDS 5.x/6.x/7.x for Native LDAP II.
  24 #
  25 # Copyright (c) 2001, 2010, Oracle and/or its affiliates. All rights reserved.
  26 #
  27
  28 #
  29 # display_msg(): Displays message corresponding to the tag passed in.
  30 #
  31 display_msg()
  32 {
  33     case "$1" in
  34     usage) cat <<EOF
  35  $PROG: [ -v ] [ -i input file ] [ -o output file ]
  36    i <input file>     Get setup info from input file.
  37    o <output file>    Generate a server configuration output file.
  38    v                  Verbose mode
  39 EOF
  40     ;;
  41     backup_server) cat <<EOF
  42 It is strongly recommended that you BACKUP the directory server
  43 before running $PROG.
  44
  45 Hit Ctrl-C at any time before the final confirmation to exit.
  46
  47 EOF
  48     ;;
  49     setup_complete) cat <<EOF
  50
  51 $PROG: Setup of iDS server ${IDS_SERVER} is complete.
  52
  53 EOF
  54     ;;
  55     display_vlv_list) cat <<EOF
  56
  57 Note: idsconfig has created entries for VLV indexes.
  58
  59       For DS5.x, use the directoryserver(1m) script on ${IDS_SERVER}
  60       to stop the server.  Then, using directoryserver, follow the
  61       directoryserver examples below to create the actual VLV indexes.
  62
  63       For DS6.x or later, use dsadm command delivered with DS on ${IDS_SERVER}
  64       to stop the server.  Then, using dsadm, follow the
  65       dsadm examples below to create the actual VLV indexes.
  66
  67 EOF
  68     ;;
  69     cred_level_menu) cat <<EOF
  70 The following are the supported credential levels:
  71   1  anonymous
  72   2  proxy
  73   3  proxy anonymous
  74   4  self
  75 EOF
  76     ;;
  77     auth_method_menu) cat <<EOF
  78 The following are the supported Authentication Methods:
  79   1  none
  80   2  simple
  81   3  sasl/DIGEST-MD5
  82   4  tls:simple
  83   5  tls:sasl/DIGEST-MD5
  84   6  sasl/GSSAPI
  85 EOF
  86     ;;
  87     srvauth_method_menu) cat <<EOF
  88 The following are the supported Authentication Methods:
  89   1  simple
  90   2  sasl/DIGEST-MD5
  91   3  tls:simple
  92   4  tls:sasl/DIGEST-MD5
  93   5  sasl/GSSAPI
  94 EOF
  95     ;;
  96     prompt_ssd_menu) cat <<EOF
  97   A  Add a Service Search Descriptor
  98   D  Delete a SSD
  99   M  Modify a SSD
 100   P  Display all SSD's
 101   H  Help
 102   X  Clear all SSD's
 103
 104   Q  Exit menu
 105 EOF
 106     ;;
 107     summary_menu)
 108
 109         SUFFIX_INFO=
 110         DB_INFO=
 111
 112         [ -n "${NEED_CREATE_SUFFIX}" ] &&
 113         {
 114                 SUFFIX_INFO=`cat <<EOF
 115
 116          Suffix to create          : $LDAP_SUFFIX
 117 EOF
 118 `
 119                 [ -n "${NEED_CREATE_BACKEND}" ] &&
 120                         DB_INFO=`cat <<EOF
 121
 122          Database to create        : $IDS_DATABASE
 123 EOF
 124 `
 125         }
 126
 127         cat <<EOF
 128               Summary of Configuration
 129
 130   1  Domain to serve               : $LDAP_DOMAIN
 131   2  Base DN to setup              : $LDAP_BASEDN$SUFFIX_INFO$DB_INFO
 132   3  Profile name to create        : $LDAP_PROFILE_NAME
 133   4  Default Server List           : $LDAP_SERVER_LIST
 134   5  Preferred Server List         : $LDAP_PREF_SRVLIST
 135   6  Default Search Scope          : $LDAP_SEARCH_SCOPE
 136   7  Credential Level              : $LDAP_CRED_LEVEL
 137   8  Authentication Method         : $LDAP_AUTHMETHOD
 138   9  Enable Follow Referrals       : $LDAP_FOLLOWREF
 139  10  iDS Time Limit                : $IDS_TIMELIMIT
 140  11  iDS Size Limit                : $IDS_SIZELIMIT
 141  12  Enable crypt password storage : $NEED_CRYPT
 142  13  Service Auth Method pam_ldap  : $LDAP_SRV_AUTHMETHOD_PAM
 143  14  Service Auth Method keyserv   : $LDAP_SRV_AUTHMETHOD_KEY
 144  15  Service Auth Method passwd-cmd: $LDAP_SRV_AUTHMETHOD_CMD
 145  16  Search Time Limit             : $LDAP_SEARCH_TIME_LIMIT
 146  17  Profile Time to Live          : $LDAP_PROFILE_TTL
 147  18  Bind Limit                    : $LDAP_BIND_LIMIT
 148  19  Enable shadow update          : $LDAP_ENABLE_SHADOW_UPDATE
 149  20  Service Search Descriptors Menu
 150
 151 EOF
 152     ;;
 153     sfx_not_suitable) cat <<EOF
 154
 155 Sorry, suffix ${LDAP_SUFFIX} is not suitable for Base DN ${LDAP_BASEDN}
 156
 157 EOF
 158     ;;
 159     obj_not_found) cat <<EOF
 160
 161 Sorry, ${PROG} can't find an objectclass for "$_ATT" attribute
 162
 163 EOF
 164     ;;
 165     sfx_config_incons) cat <<EOF
 166
 167 Sorry, there is no suffix mapping for ${LDAP_SUFFIX},
 168 while ldbm database exists, server configuration needs to be fixed manually,
 169 look at cn=mapping tree,cn=config and cn=ldbm database,cn=plugins,cn=config
 170
 171 EOF
 172     ;;
 173     ldbm_db_exist) cat <<EOF
 174
 175 Database "${IDS_DATABASE}" already exists,
 176 however "${IDS_DATABASE_AVAIL}" name is available
 177
 178 EOF
 179     ;;
 180     unable_find_db_name) cat <<EOF
 181
 182 Unable to find any available database name close to "${IDS_DATABASE}"
 183
 184 EOF
 185     ;;
 186     create_ldbm_db_error) cat <<EOF
 187
 188 ERROR: unable to create suffix ${LDAP_SUFFIX}
 189        due to server error that occurred during creation of ldbm database
 190
 191 EOF
 192     ;;
 193     create_suffix_entry_error) cat <<EOF
 194
 195 ERROR: unable to create entry ${LDAP_SUFFIX} of ${LDAP_SUFFIX_OBJ} class
 196
 197 EOF
 198     ;;
 199     ldap_suffix_list) cat <<EOF
 200
 201 No valid suffixes (naming contexts) were found for LDAP base DN:
 202 ${LDAP_BASEDN}
 203
 204 Available suffixes are:
 205 ${LDAP_SUFFIX_LIST}
 206
 207 EOF
 208     ;;
 209     sorry) cat <<EOF
 210
 211 HELP - No help is available for this topic.
 212
 213 EOF
 214     ;;
 215     create_suffix_help) cat <<EOF
 216
 217 HELP - Our Base DN is ${LDAP_BASEDN}
 218        and we need to create a Directory Suffix,
 219        which can be equal to Base DN itself or be any of Base DN parents.
 220        All intermediate entries up to suffix will be created on demand.
 221
 222 EOF
 223     ;;
 224     enter_ldbm_db_help) cat <<EOF
 225
 226 HELP - ldbm database is an internal database for storage of our suffix data.
 227        Database name must be alphanumeric due to Directory Server restriction.
 228
 229 EOF
 230     ;;
 231     backup_help) cat <<EOF
 232
 233 HELP - Since idsconfig modifies the directory server configuration,
 234        it is strongly recommended that you backup the server prior
 235        to running this utility.  This is especially true if the server
 236        being configured is a production server.
 237
 238 EOF
 239     ;;
 240     port_help) cat <<EOF
 241
 242 HELP - Enter the port number the directory server is configured to
 243        use for LDAP.
 244
 245 EOF
 246     ;;
 247     domain_help) cat <<EOF
 248
 249 HELP - This is the DNS domain name this server will be serving.  You
 250        must provide this name even if the server is not going to be populated
 251        with hostnames.  Any unqualified hostname stored in the directory
 252        will be fully qualified using this DNS domain name.
 253
 254 EOF
 255     ;;
 256     basedn_help) cat <<EOF
 257
 258 HELP - This parameter defines the default location in the directory tree for
 259        the naming services entries.  You can override this default by using
 260        serviceSearchDescriptors (SSD). You will be given the option to set up
 261        an SSD later on in the setup.
 262
 263 EOF
 264     ;;
 265     profile_help) cat <<EOF
 266
 267 HELP - Name of the configuration profile with which the clients will be
 268        configured. A directory server can store various profiles for multiple
 269        groups of clients.  The initialization tool, (ldapclient(1M)), assumes
 270        "default" unless another is specified.
 271
 272 EOF
 273     ;;
 274     def_srvlist_help) cat <<EOF
 275
 276 HELP - Provide a list of directory servers to serve clients using this profile.
 277        All these servers should contain consistent data and provide similar
 278        functionality.  This list is not ordered, and clients might change the
 279        order given in this list. Note that this is a space separated list of
 280        *IP addresses* (not host names).  Providing port numbers is optional.
 281
 282 EOF
 283     ;;
 284     pref_srvlist_help) cat <<EOF
 285
 286 HELP - Provide a list of directory servers to serve this client profile.
 287        Unlike the default server list, which is not ordered, the preferred
 288        servers must be entered IN THE ORDER you wish to have them contacted.
 289        If you do specify a preferred server list, clients will always contact
 290        them before attempting to contact any of the servers on the default
 291        server list. Note that you must enter the preferred server list as a
 292        space-separated list of *IP addresses* (not host names).  Providing port
 293        numbers is optional.
 294
 295 EOF
 296     ;;
 297     srch_scope_help) cat <<EOF
 298
 299 HELP - Default search scope to be used for all searches unless they are
 300        overwritten using serviceSearchDescriptors.  The valid options
 301        are "one", which would specify the search will only be performed
 302        at the base DN for the given service, or "sub", which would specify
 303        the search will be performed through *all* levels below the base DN
 304        for the given service.
 305
 306 EOF
 307     ;;
 308     cred_lvl_help) cat <<EOF
 309
 310 HELP - This parameter defines what credentials the clients use to
 311        authenticate to the directory server.  This list might contain
 312        multiple credential levels and is ordered.  If a proxy level
 313        is configured, you will also be prompted to enter a bind DN
 314        for the proxy agent along with a password.  This proxy agent
 315        will be created if it does not exist.
 316
 317 EOF
 318     ;;
 319     auth_help) cat <<EOF
 320
 321 HELP - The default authentication method(s) to be used by all services
 322        in the client using this profile.  This is a ordered list of
 323        authentication methods separated by a ';'.  The supported methods
 324        are provided in a menu.  Note that sasl/DIGEST-MD5 binds require
 325        passwords to be stored un-encrypted on the server.
 326
 327 EOF
 328     ;;
 329     srvauth_help) cat <<EOF
 330
 331 HELP - The authentication methods to be used by a given service.  Currently
 332        3 services support this feature: pam_ldap, keyserv, and passwd-cmd.
 333        The authentication method specified in this attribute overrides
 334        the default authentication method defined in the profile.  This
 335        feature can be used to select stronger authentication methods for
 336        services which require increased security.
 337
 338 EOF
 339     ;;
 340     pam_ldap_help) cat <<EOF
 341
 342 HELP - The authentication method(s) to be used by pam_ldap when contacting
 343        the directory server.  This is a ordered list, and, if provided, will
 344        override the default authentication method parameter.
 345
 346 EOF
 347     ;;
 348     keyserv_help) cat <<EOF
 349
 350 HELP - The authentication method(s) to be used by newkey(1M) and chkey(1)
 351        when contacting the directory server.  This is a ordered list and
 352        if provided will override the default authentication method
 353        parameter.
 354
 355 EOF
 356     ;;
 357     passwd-cmd_help) cat <<EOF
 358
 359 HELP - The authentication method(s) to be used by passwd(1) command when
 360        contacting the directory server.  This is a ordered list and if
 361        provided will override the default authentication method parameter.
 362
 363 EOF
 364     ;;
 365     referrals_help) cat <<EOF
 366
 367 HELP - This parameter indicates whether the client should follow
 368        ldap referrals if it encounters one during naming lookups.
 369
 370 EOF
 371     ;;
 372     tlim_help) cat <<EOF
 373
 374 HELP - The server time limit value indicates the maximum amount of time the
 375        server would spend on a query from the client before abandoning it.
 376        A value of '-1' indicates no limit.
 377
 378 EOF
 379     ;;
 380     slim_help) cat <<EOF
 381
 382 HELP - The server sizelimit value indicates the maximum number of entries
 383        the server would return in respond to a query from the client.  A
 384        value of '-1' indicates no limit.
 385
 386 EOF
 387     ;;
 388     crypt_help) cat <<EOF
 389
 390 HELP - By default iDS does not store userPassword attribute values using
 391        unix "crypt" format.  If you need to keep your passwords in the crypt
 392        format for NIS/NIS+ and pam_unix compatibility, choose 'yes'.  If
 393        passwords are stored using any other format than crypt, pam_ldap
 394        MUST be used by clients to authenticate users to the system. Note
 395        that if you wish to use sasl/DIGEST-MD5 in conjunction with pam_ldap,
 396        user passwords must be stored in the clear format.
 397
 398 EOF
 399     ;;
 400     srchtime_help) cat <<EOF
 401
 402 HELP - The search time limit the client will enforce for directory
 403        lookups.
 404
 405 EOF
 406     ;;
 407     profttl_help) cat <<EOF
 408
 409 HELP - The time to live value for profile.  The client will refresh its
 410        cached version of the configuration profile at this TTL interval.
 411
 412 EOF
 413     ;;
 414     bindlim_help) cat <<EOF
 415
 416 HELP - The time limit for the bind operation to the directory.  This
 417        value controls the responsiveness of the client in case a server
 418        becomes unavailable.  The smallest timeout value for a given
 419        network architecture/conditions would work best.  This is very
 420        similar to setting TCP timeout, but only for LDAP bind operation.
 421
 422 EOF
 423     ;;
 424     ssd_help) cat <<EOF
 425
 426 HELP - Using Service Search Descriptors (SSD), you can override the
 427        default configuration for a given service.  The SSD can be
 428        used to override the default search base DN, the default search
 429        scope, and the default search filter to be used for directory
 430        lookups.  SSD are supported for all services (databases)
 431        defined in nsswitch.conf(4).  The default base DN is defined
 432        in ldap(1).
 433
 434        Note: SSD are powerful tools in defining configuration profiles
 435              and provide a great deal of flexibility.  However, care
 436              must be taken in creating them.  If you decide to make use
 437              of SSDs, consult the documentation first.
 438
 439 EOF
 440     ;;
 441     ssd_menu_help) cat <<EOF
 442
 443 HELP - Using this menu SSD can be added, updated, or deleted from
 444        the profile.
 445
 446        A - This option creates a new SSD by prompting for the
 447            service name, base DN, and scope.  Service name is
 448            any valid service as defined in ldap(1).  base is
 449            either the distinguished name to the container where
 450            this service will use, or a relative DN followed
 451            by a ','.
 452        D - Delete a previously created SSD.
 453        M - Modify a previously created SSD.
 454        P - Display a list of all the previously created SSD.
 455        X - Delete all of the previously created SSD.
 456
 457        Q - Exit the menu and continue with the server configuration.
 458
 459 EOF
 460     ;;
 461     ldap_suffix_list_help) cat <<EOF
 462
 463 HELP - No valid suffixes (naming contexts) are available on server
 464        ${IDS_SERVER}:${IDS_PORT}.
 465        You must set an LDAP Base DN that can be contained in
 466        an existing suffix.
 467
 468 EOF
 469     ;;
 470     enable_shadow_update_help) cat <<EOF
 471
 472 HELP - Enter 'y' to set up the LDAP server for shadow update.
 473        The setup will add an administrator identity/credential
 474        and modify the necessary access controls for the client
 475        to update shadow(4) data on the LDAP server. If sasl/GSSAPI
 476        is in use, the Kerberos host principal will be used as the
 477        administrator identity.
 478
 479        Shadow data is used for password aging and account locking.
 480        Please refer to the shadow(4) manual page for details.
 481
 482 EOF
 483     ;;
 484     add_admin_cred_help) cat <<EOF
 485
 486 HELP - Start the setup to add an administrator identity/credential
 487        and to modify access controls for the client to update
 488        shadow(4) data on the LDAP server.
 489
 490        Shadow data is used for password aging and account locking.
 491        Please refer to the shadow(4) manual page for details.
 492
 493 EOF
 494     ;;
 495     use_host_principal_help) cat <<EOF
 496
 497 HELP - A profile with a 'sasl/GSSAPI' authentication method and a 'self'
 498        credential level is detected, enter 'y' to modify the necessary
 499        access controls for allowing the client to update shadow(4) data
 500        on the LDAP server.
 501
 502        Shadow data is used for password aging and account locking.
 503        Please refer to the shadow(4) manual page for details.
 504
 505 EOF
 506     ;;
 507     esac
 508 }
 509
 510
 511 #
 512 # get_ans(): gets an answer from the user.
 513 #               $1  instruction/comment/description/question
 514 #               $2  default value
 515 #
 516 get_ans()
 517 {
 518     if [ -z "$2" ]
 519     then
 520         ${ECHO} "$1 \c"
 521     else
 522         ${ECHO} "$1 [$2] \c"
 523     fi
 524
 525     read ANS
 526     if [ -z "$ANS" ]
 527     then
 528         ANS=$2
 529     fi
 530 }
 531
 532
 533 #
 534 # get_ans_req(): gets an answer (required) from the user, NULL value not allowed.
 535 #               $@  instruction/comment/description/question
 536 #
 537 get_ans_req()
 538 {
 539     ANS=""                  # Set ANS to NULL.
 540     while [ "$ANS" = "" ]
 541     do
 542         get_ans "$@"
 543         [ "$ANS" = "" ] && ${ECHO} "NULL value not allowed!"
 544     done
 545 }
 546
 547
 548 #
 549 # get_number(): Querys and verifies that number entered is numeric.
 550 #               Function will repeat prompt user for number value.
 551 #               $1  Message text.
 552 #               $2  default value.
 553 #               $3  Help argument.
 554 #
 555 get_number()
 556 {
 557     ANS=""                  # Set ANS to NULL.
 558     NUM=""
 559
 560     get_ans "$1" "$2"
 561
 562     # Verify that value is numeric.
 563     while not_numeric $ANS
 564     do
 565         case "$ANS" in
 566             [Hh] | help | Help | \?) display_msg ${3:-sorry} ;;
 567             * ) ${ECHO} "Invalid value: \"${ANS}\". \c"
 568              ;;
 569         esac
 570         # Get a new value.
 571         get_ans "Enter a numeric value:" "$2"
 572     done
 573     NUM=$ANS
 574 }
 575
 576
 577 #
 578 # get_negone_num(): Only allows a -1 or positive integer.
 579 #                   Used for values where -1 has special meaning.
 580 #
 581 #                   $1 - Prompt message.
 582 #                   $2 - Default value (require).
 583 #                   $3 - Optional help argument.
 584 get_negone_num()
 585 {
 586     while :
 587     do
 588         get_number "$1" "$2" "$3"
 589         if is_negative $ANS
 590         then
 591             if [ "$ANS" = "-1" ]; then
 592                 break  # -1 is OK, so break.
 593             else       # Need to re-enter number.
 594                 ${ECHO} "Invalid number: please enter -1 or positive number."
 595             fi
 596         else
 597             break      # Positive number
 598         fi
 599     done
 600 }
 601
 602
 603 #
 604 # get_passwd(): Reads a password from the user and verify with second.
 605 #               $@  instruction/comment/description/question
 606 #
 607 get_passwd()
 608 {
 609     [ $DEBUG -eq 1 ] && ${ECHO} "In get_passwd()"
 610
 611     # Temporary PASSWD variables
 612     _PASS1=""
 613     _PASS2=""
 614
 615     /usr/bin/stty -echo     # Turn echo OFF
 616
 617     # Endless loop that continues until passwd and re-entered passwd
 618     # match.
 619     while :
 620     do
 621         ANS=""                  # Set ANS to NULL.
 622
 623         # Don't allow NULL for first try.
 624         while [ "$ANS" = "" ]
 625         do
 626             get_ans "$@"
 627             [ "$ANS" = "" ] && ${ECHO} "" && ${ECHO} "NULL passwd not allowed!"
 628         done
 629         _PASS1=$ANS         # Store first try.
 630
 631         # Get second try.
 632         ${ECHO} ""
 633         get_ans "Re-enter passwd:"
 634         _PASS2=$ANS
 635
 636         # Test if passwords are identical.
 637         if [ "$_PASS1" = "$_PASS2" ]; then
 638             break
 639         fi
 640
 641         # Move cursor down to next line and print ERROR message.
 642         ${ECHO} ""
 643         ${ECHO} "ERROR: passwords don't match; try again."
 644     done
 645
 646     /usr/bin/stty echo      # Turn echo ON
 647
 648     ${ECHO} ""
 649 }
 650
 651
 652 #
 653 # get_passwd_nochk(): Reads a password from the user w/o check.
 654 #               $@  instruction/comment/description/question
 655 #
 656 get_passwd_nochk()
 657 {
 658     [ $DEBUG -eq 1 ] && ${ECHO} "In get_passwd_nochk()"
 659
 660     /usr/bin/stty -echo     # Turn echo OFF
 661
 662     get_ans "$@"
 663
 664     /usr/bin/stty echo      # Turn echo ON
 665
 666     ${ECHO} ""
 667 }
 668
 669
 670 #
 671 # get_menu_choice(): Get a menu choice from user.  Continue prompting
 672 #                    till the choice is in required range.
 673 #   $1 .. Message text.
 674 #   $2 .. min value
 675 #   $3 .. max value
 676 #   $4 .. OPTIONAL: default value
 677 #
 678 #   Return value:
 679 #     MN_CH will contain the value selected.
 680 #
 681 get_menu_choice()
 682 {
 683     # Check for req parameter.
 684     if [ $# -lt 3 ]; then
 685         ${ECHO} "get_menu_choice(): Did not get required parameters."
 686         return 1
 687     fi
 688
 689     while :
 690     do
 691         get_ans "$1" "$4"
 692         MN_CH=$ANS
 693         is_negative $MN_CH
 694         if [ $? -eq 1 ]; then
 695             if [ $MN_CH -ge $2 ]; then
 696                 if [ $MN_CH -le $3 ]; then
 697                     return
 698                 fi
 699             fi
 700         fi
 701         ${ECHO} "Invalid choice: $MN_CH"
 702     done
 703 }
 704
 705
 706 #
 707 # get_confirm(): Get confirmation from the user. (Y/Yes or N/No)
 708 #                $1 - Message
 709 #                $2 - default value.
 710 #
 711 get_confirm()
 712 {
 713     _ANSWER=
 714
 715     while :
 716     do
 717         # Display Internal ERROR if $2 not set.
 718         if [ -z "$2" ]
 719         then
 720             ${ECHO} "INTERNAL ERROR: get_confirm requires 2 args, 3rd is optional."
 721             exit 2
 722         fi
 723
 724         # Display prompt.
 725         ${ECHO} "$1 [$2] \c"
 726
 727         # Get the ANSWER.
 728         read _ANSWER
 729         if [ "$_ANSWER" = "" ] && [ -n "$2" ] ; then
 730             _ANSWER=$2
 731         fi
 732         case "$_ANSWER" in
 733             [Yy] | yes | Yes | YES) return 1 ;;
 734             [Nn] | no  | No  | NO)  return 0 ;;
 735             [Hh] | help | Help | \?) display_msg ${3:-sorry};;
 736             * ) ${ECHO} "Please enter y or n."  ;;
 737         esac
 738     done
 739 }
 740
 741
 742 #
 743 # get_confirm_nodef(): Get confirmation from the user. (Y/Yes or N/No)
 744 #                      No default value supported.
 745 #
 746 get_confirm_nodef()
 747 {
 748     _ANSWER=
 749
 750     while :
 751     do
 752         ${ECHO} "$@ \c"
 753         read _ANSWER
 754         case "$_ANSWER" in
 755             [Yy] | yes | Yes | YES) return 1 ;;
 756             [Nn] | no  | No  | NO)  return 0 ;;
 757             * ) ${ECHO} "Please enter y or n."  ;;
 758         esac
 759     done
 760 }
 761
 762
 763 #
 764 # is_numeric(): Tells is a string is numeric.
 765 #    0 = Numeric
 766 #    1 = NOT Numeric
 767 #
 768 is_numeric()
 769 {
 770     # Check for parameter.
 771     if [ $# -ne 1 ]; then
 772         return 1
 773     fi
 774
 775     # Determine if numeric.
 776     expr "$1" + 1 > /dev/null 2>&1
 777     if [ $? -ge 2 ]; then
 778         return 1
 779     fi
 780
 781     # Made it here, it's Numeric.
 782     return 0
 783 }
 784
 785
 786 #
 787 # not_numeric(): Reverses the return values of is_numeric.  Useful
 788 #                 for if and while statements that want to test for
 789 #                 non-numeric data.
 790 #    0 = NOT Numeric
 791 #    1 = Numeric
 792 #
 793 not_numeric()
 794 {
 795     is_numeric $1
 796     if [ $? -eq 0 ]; then
 797        return 1
 798     else
 799        return 0
 800     fi
 801 }
 802
 803
 804 #
 805 # is_negative(): Tells is a Numeric value is less than zero.
 806 #    0 = Negative Numeric
 807 #    1 = Positive Numeric
 808 #    2 = NOT Numeric
 809 #
 810 is_negative()
 811 {
 812     # Check for parameter.
 813     if [ $# -ne 1 ]; then
 814         return 1
 815     fi
 816
 817     # Determine if numeric.  Can't use expr because -0 is
 818     # considered positive??
 819     if is_numeric $1; then
 820         case "$1" in
 821             -*)  return 0 ;;   # Negative Numeric
 822             *)   return 1 ;;   # Positive Numeric
 823         esac
 824     else
 825         return 2
 826     fi
 827 }
 828
 829
 830 #
 831 # check_domainname(): check validity of a domain name.  Currently we check
 832 #                     that it has at least two components.
 833 #               $1  the domain name to be checked
 834 #
 835 check_domainname()
 836 {
 837     if [ ! -z "$1" ]
 838     then
 839         t=`expr "$1" : '[^.]\{1,\}[.][^.]\{1,\}'`
 840         if [ "$t" = 0 ]
 841         then
 842             return 1
 843         fi
 844     fi
 845     return 0
 846 }
 847
 848
 849 #
 850 # check_baseDN(): check validity of the baseDN name.
 851 #               $1  the baseDN name to be checked
 852 #
 853 #     NOTE: The check_baseDN function does not catch all invalid DN's.
 854 #           Its purpose is to reduce the number of invalid DN's to
 855 #           get past the input routine.  The invalid DN's will be
 856 #           caught by the LDAP server when they are attempted to be
 857 #           created.
 858 #
 859 check_baseDN()
 860 {
 861     ck_DN=$1
 862     ${ECHO} "  Checking LDAP Base DN ..."
 863     if [ ! -z "$ck_DN" ]; then
 864         [ $DEBUG -eq 1 ] && ${ECHO} "Checking baseDN: $ck_DN"
 865         # Check for = (assignment operator)
 866         ${ECHO} "$ck_DN" | ${GREP} "=" > /dev/null 2>&1
 867         if [ $? -ne 0 ]; then
 868             [ $DEBUG -eq 1 ] && ${ECHO} "check_baseDN: No '=' in baseDN."
 869             return 1
 870         fi
 871
 872         # Check all keys.
 873         while :
 874         do
 875             # Get first key.
 876             dkey=`${ECHO} $ck_DN | cut -d'=' -f1`
 877
 878             # Check that the key string is valid
 879             check_attrName $dkey
 880             if [ $? -ne 0 ]; then
 881                 [ $DEBUG -eq 1 ] && ${ECHO} "check_baseDN: invalid key=${dkey}"
 882                 return 1
 883             fi
 884
 885             [ $DEBUG -eq 1 ] && ${ECHO} "check_baseDN: valid key=${dkey}"
 886
 887             # Remove first key from DN
 888             ck_DN=`${ECHO} $ck_DN | cut -s -d',' -f2-`
 889
 890             # Break loop if nothing left.
 891             if [ "$ck_DN" = "" ]; then
 892                 break
 893             fi
 894         done
 895     fi
 896     return 0
 897 }
 898
 899
 900 #
 901 # domain_2_dc(): Convert a domain name into dc string.
 902 #    $1  .. Domain name.
 903 #
 904 domain_2_dc()
 905 {
 906     _DOM=$1           # Domain parameter.
 907     _DOM_2_DC=""      # Return value from function.
 908     _FIRST=1          # Flag for first time.
 909
 910     export _DOM_2_DC  # Make visible for others.
 911
 912     # Convert "."'s to spaces for "for" loop.
 913     domtmp="`${ECHO} ${_DOM} | tr '.' ' '`"
 914     for i in $domtmp; do
 915         if [ $_FIRST -eq 1 ]; then
 916             _DOM_2_DC="dc=${i}"
 917             _FIRST=0
 918         else
 919             _DOM_2_DC="${_DOM_2_DC},dc=${i}"
 920         fi
 921     done
 922 }
 923
 924
 925 #
 926 # is_root_user(): Check to see if logged in as root user.
 927 #
 928 is_root_user()
 929 {
 930     case `id` in
 931         uid=0\(root\)*) return 0 ;;
 932         * )             return 1 ;;
 933     esac
 934 }
 935
 936
 937 #
 938 # parse_arg(): Parses the command line arguments and sets the
 939 #              appropriate variables.
 940 #
 941 parse_arg()
 942 {
 943     while getopts "dvhi:o:" ARG
 944     do
 945         case $ARG in
 946             d)      DEBUG=1;;
 947             v)      VERB="";;
 948             i)      INPUT_FILE=$OPTARG;;
 949             o)      OUTPUT_FILE=$OPTARG;;
 950             \?) display_msg usage
 951                     exit 1;;
 952             *)  ${ECHO} "**ERROR: Supported option missing handler!"
 953                     display_msg usage
 954                     exit 1;;
 955         esac
 956     done
 957     return `expr $OPTIND - 1`
 958 }
 959
 960
 961 #
 962 # init(): initializes variables and options
 963 #
 964 init()
 965 {
 966     # General variables.
 967     PROG=`basename $0`  # Program name
 968     PID=$$              # Program ID
 969     VERB='> /dev/null 2>&1'     # NULL or "> /dev/null"
 970     ECHO="/bin/echo"    # print message on screen
 971     EVAL="eval"         # eval or echo
 972     EGREP="/usr/bin/egrep"
 973     GREP="/usr/bin/grep"
 974     DEBUG=0             # Set Debug OFF
 975     BACKUP=no_ldap      # backup suffix
 976     HOST=""             # NULL or <hostname>
 977     NAWK="/usr/bin/nawk"
 978     RM="/usr/bin/rm"
 979     WC="/usr/bin/wc"
 980     CAT="/usr/bin/cat"
 981     SED="/usr/bin/sed"
 982     MV="/usr/bin/mv"
 983
 984     DOM=""              # Set to NULL
 985     # If DNS domain (resolv.conf) exists use that, otherwise use domainname.
 986     if [ -f /etc/resolv.conf ]; then
 987         DOM=`/usr/xpg4/bin/grep -i -E '^domain|^search' /etc/resolv.conf \
 988             | awk '{ print $2 }' | tail -1`
 989     fi
 990
 991     # If for any reason the DOM did not get set (error'd resolv.conf) set
 992     # DOM to the domainname command's output.
 993     if [ "$DOM" = "" ]; then
 994         DOM=`domainname`        # domain from domainname command.
 995     fi
 996
 997     STEP=1
 998     INTERACTIVE=1       # 0 = on, 1 = off (For input file mode)
 999     DEL_OLD_PROFILE=0   # 0 (default), 1 = delete old profile.
1000
1001     # idsconfig specific variables.
1002     INPUT_FILE=""
1003     OUTPUT_FILE=""
1004     LDAP_ENABLE_SHADOW_UPDATE="FALSE"
1005     NEED_PROXY=0        # 0 = No Proxy,    1 = Create Proxy.
1006     NEED_ADMIN=0        # 0 = No Admin,    1 = Create Admin.
1007     NEED_HOSTACL=0      # 0 = No Host ACL, 1 = Create Host ACL.
1008     EXISTING_PROFILE=0
1009     LDAP_PROXYAGENT=""
1010     LDAP_ADMINDN=""
1011     LDAP_SUFFIX=""
1012     LDAP_DOMAIN=$DOM    # domainname on Server (default value)
1013     GEN_CMD=""
1014     PROXY_ACI_NAME="LDAP_Naming_Services_proxy_password_read"
1015
1016     # LDAP COMMANDS
1017     LDAPSEARCH="/bin/ldapsearch -r"
1018     LDAPMODIFY=/bin/ldapmodify
1019     LDAPADD=/bin/ldapadd
1020     LDAPDELETE=/bin/ldapdelete
1021     LDAP_GEN_PROFILE=/usr/sbin/ldap_gen_profile
1022
1023     # iDS specific information
1024     IDS_SERVER=""
1025     IDS_PORT=389
1026     NEED_TIME=0
1027     NEED_SIZE=0
1028     NEED_SRVAUTH_PAM=0
1029     NEED_SRVAUTH_KEY=0
1030     NEED_SRVAUTH_CMD=0
1031     IDS_TIMELIMIT=""
1032     IDS_SIZELIMIT=""
1033
1034     # LDAP PROFILE related defaults
1035     LDAP_ROOTDN="cn=Directory Manager"   # Provide common default.
1036     LDAP_ROOTPWD=""                      # NULL passwd as default (i.e. invalid)
1037     LDAP_PROFILE_NAME="default"
1038     LDAP_BASEDN=""
1039     LDAP_SERVER_LIST=""
1040     LDAP_AUTHMETHOD=""
1041     LDAP_FOLLOWREF="FALSE"
1042     NEED_CRYPT=""
1043     LDAP_SEARCH_SCOPE="one"
1044     LDAP_SRV_AUTHMETHOD_PAM=""
1045     LDAP_SRV_AUTHMETHOD_KEY=""
1046     LDAP_SRV_AUTHMETHOD_CMD=""
1047     LDAP_SEARCH_TIME_LIMIT=30
1048     LDAP_PREF_SRVLIST=""
1049     LDAP_PROFILE_TTL=43200
1050     LDAP_CRED_LEVEL="proxy"
1051     LDAP_BIND_LIMIT=10
1052
1053     # Prevent new files from being read by group or others.
1054     umask 077
1055
1056     # Service Search Descriptors
1057     LDAP_SERV_SRCH_DES=""
1058
1059     # Set and create TMPDIR.
1060     TMPDIR="/tmp/idsconfig.${PID}"
1061     if mkdir -m 700 ${TMPDIR}
1062     then
1063         # Cleanup on exit.
1064         trap 'rm -rf ${TMPDIR}; /usr/bin/stty echo; exit' 1 2 3 6 15
1065     else
1066         echo "ERROR: unable to create a safe temporary directory."
1067         exit 1
1068     fi
1069     LDAP_ROOTPWF=${TMPDIR}/rootPWD
1070
1071     # Set the SSD file name after setting TMPDIR.
1072     SSD_FILE=${TMPDIR}/ssd_list
1073
1074     # GSSAPI setup
1075     GSSAPI_ENABLE=0
1076     LDAP_KRB_REALM=""
1077     SCHEMA_UPDATED=0
1078
1079     export DEBUG VERB ECHO EVAL EGREP GREP STEP TMPDIR
1080     export IDS_SERVER IDS_PORT LDAP_ROOTDN LDAP_ROOTPWD LDAP_SERVER_LIST
1081     export LDAP_BASEDN LDAP_ROOTPWF
1082     export LDAP_DOMAIN LDAP_SUFFIX LDAP_PROXYAGENT LDAP_PROXYAGENT_CRED
1083     export NEED_PROXY
1084     export LDAP_ENABLE_SHADOW_UPDATE LDAP_ADMINDN LDAP_ADMIN_CRED
1085     export NEED_ADMIN NEED_HOSTACL EXISTING_PROFILE
1086     export LDAP_PROFILE_NAME LDAP_BASEDN LDAP_SERVER_LIST
1087     export LDAP_AUTHMETHOD LDAP_FOLLOWREF LDAP_SEARCH_SCOPE LDAP_SEARCH_TIME_LIMIT
1088     export LDAP_PREF_SRVLIST LDAP_PROFILE_TTL LDAP_CRED_LEVEL LDAP_BIND_LIMIT
1089     export NEED_SRVAUTH_PAM NEED_SRVAUTH_KEY NEED_SRVAUTH_CMD
1090     export LDAP_SRV_AUTHMETHOD_PAM LDAP_SRV_AUTHMETHOD_KEY LDAP_SRV_AUTHMETHOD_CMD
1091     export LDAP_SERV_SRCH_DES SSD_FILE
1092     export GEN_CMD GSSAPI_ENABLE LDAP_KRB_REALM SCHEMA_UPDATED
1093 }
1094
1095
1096 #
1097 # disp_full_debug(): List of all debug variables usually interested in.
1098 #                    Grouped to avoid MASSIVE code duplication.
1099 #
1100 disp_full_debug()
1101 {
1102     [ $DEBUG -eq 1 ] && ${ECHO} "  IDS_SERVER = $IDS_SERVER"
1103     [ $DEBUG -eq 1 ] && ${ECHO} "  IDS_PORT = $IDS_PORT"
1104     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_ROOTDN = $LDAP_ROOTDN"
1105     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_ROOTPWD = $LDAP_ROOTPWD"
1106     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_DOMAIN = $LDAP_DOMAIN"
1107     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_SUFFIX = $LDAP_SUFFIX"
1108     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_BASEDN = $LDAP_BASEDN"
1109     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_PROFILE_NAME = $LDAP_PROFILE_NAME"
1110     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_SERVER_LIST = $LDAP_SERVER_LIST"
1111     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_PREF_SRVLIST = $LDAP_PREF_SRVLIST"
1112     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_SEARCH_SCOPE = $LDAP_SEARCH_SCOPE"
1113     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_CRED_LEVEL = $LDAP_CRED_LEVEL"
1114     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_AUTHMETHOD = $LDAP_AUTHMETHOD"
1115     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_FOLLOWREF = $LDAP_FOLLOWREF"
1116     [ $DEBUG -eq 1 ] && ${ECHO} "  IDS_TIMELIMIT = $IDS_TIMELIMIT"
1117     [ $DEBUG -eq 1 ] && ${ECHO} "  IDS_SIZELIMIT = $IDS_SIZELIMIT"
1118     [ $DEBUG -eq 1 ] && ${ECHO} "  NEED_CRYPT = $NEED_CRYPT"
1119     [ $DEBUG -eq 1 ] && ${ECHO} "  NEED_SRVAUTH_PAM = $NEED_SRVAUTH_PAM"
1120     [ $DEBUG -eq 1 ] && ${ECHO} "  NEED_SRVAUTH_KEY = $NEED_SRVAUTH_KEY"
1121     [ $DEBUG -eq 1 ] && ${ECHO} "  NEED_SRVAUTH_CMD = $NEED_SRVAUTH_CMD"
1122     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_SRV_AUTHMETHOD_PAM = $LDAP_SRV_AUTHMETHOD_PAM"
1123     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_SRV_AUTHMETHOD_KEY = $LDAP_SRV_AUTHMETHOD_KEY"
1124     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_SRV_AUTHMETHOD_CMD = $LDAP_SRV_AUTHMETHOD_CMD"
1125     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_SEARCH_TIME_LIMIT = $LDAP_SEARCH_TIME_LIMIT"
1126     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_PROFILE_TTL = $LDAP_PROFILE_TTL"
1127     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_BIND_LIMIT = $LDAP_BIND_LIMIT"
1128     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_ENABLE_SHADOW_UPDATE = $LDAP_ENABLE_SHADOW_UPDATE"
1129
1130     # Only display proxy stuff if needed.
1131     [ $DEBUG -eq 1 ] && ${ECHO} "  NEED_PROXY = $NEED_PROXY"
1132     if [ $NEED_PROXY -eq  1 ]; then
1133         [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_PROXYAGENT = $LDAP_PROXYAGENT"
1134         [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_PROXYAGENT_CRED = $LDAP_PROXYAGENT_CRED"
1135     fi
1136
1137     # Only display admin credential if needed.
1138     [ $DEBUG -eq 1 ] && ${ECHO} "  NEED_ADMIN = $NEED_ADMIN"
1139     [ $DEBUG -eq 1 ] && ${ECHO} "  NEED_HOSTACL = $NEED_HOSTACL"
1140     if [ $NEED_ADMIN -eq  1 ]; then
1141         [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_ADMINDN = $LDAP_ADMINDN"
1142         [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_ADMIN_CRED = $LDAP_ADMIN_CRED"
1143     fi
1144
1145     # Service Search Descriptors are a special case.
1146     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_SERV_SRCH_DES = $LDAP_SERV_SRCH_DES"
1147 }
1148
1149
1150 #
1151 # load_config_file(): Loads the config file.
1152 #
1153 load_config_file()
1154 {
1155     [ $DEBUG -eq 1 ] && ${ECHO} "In load_config_file()"
1156
1157     # Remove SSD lines from input file before sourcing.
1158     # The SSD lines must be removed because some forms of the
1159     # data could cause SHELL errors.
1160     ${GREP} -v "LDAP_SERV_SRCH_DES=" ${INPUT_FILE} > ${TMPDIR}/inputfile.noSSD
1161
1162     # Source the input file.
1163     . ${TMPDIR}/inputfile.noSSD
1164
1165     # If LDAP_SUFFIX is no set, try to utilize LDAP_TREETOP since older
1166     # config files use LDAP_TREETOP
1167     LDAP_SUFFIX="${LDAP_SUFFIX:-$LDAP_TREETOP}"
1168
1169     # Save password to temporary file.
1170     save_password
1171
1172     # Create the SSD file.
1173     create_ssd_file
1174
1175     # Display FULL debugging info.
1176     disp_full_debug
1177 }
1178
1179 #
1180 # save_password(): Save password to temporary file.
1181 #
1182 save_password()
1183 {
1184     cat > ${LDAP_ROOTPWF} <<EOF
1185 ${LDAP_ROOTPWD}
1186 EOF
1187 }
1188
1189 ######################################################################
1190 # FUNCTIONS  FOR prompt_config_info() START HERE.
1191 ######################################################################
1192
1193 #
1194 # get_ids_server(): Prompt for iDS server name.
1195 #
1196 get_ids_server()
1197 {
1198     while :
1199     do
1200         # Prompt for server name.
1201         get_ans "Enter the JES Directory Server's  hostname to setup:" "$IDS_SERVER"
1202         IDS_SERVER="$ANS"
1203
1204         # Ping server to see if live.  If valid break out of loop.
1205         ping $IDS_SERVER > /dev/null 2>&1
1206         if [ $? -eq 0 ]; then
1207             break
1208         fi
1209
1210         # Invalid server, enter a new name.
1211         ${ECHO} "ERROR: Server '${IDS_SERVER}' is invalid or unreachable."
1212         IDS_SERVER=""
1213     done
1214
1215     # Set SERVER_ARGS and LDAP_ARGS since values might of changed.
1216     SERVER_ARGS="-h ${IDS_SERVER} -p ${IDS_PORT}"
1217     LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}"
1218     export SERVER_ARGS
1219
1220 }
1221
1222 #
1223 # get_ids_port(): Prompt for iDS port number.
1224 #
1225 get_ids_port()
1226 {
1227     # Get a valid iDS port number.
1228     while :
1229     do
1230         # Enter port number.
1231         get_number "Enter the port number for iDS (h=help):" "$IDS_PORT" "port_help"
1232         IDS_PORT=$ANS
1233         # Do a simple search to check hostname and port number.
1234         # If search returns SUCCESS, break out, host and port must
1235         # be valid.
1236         ${LDAPSEARCH} -h ${IDS_SERVER} -p ${IDS_PORT} -b "" -s base "objectclass=*" > /dev/null 2>&1
1237         if [ $? -eq 0 ]; then
1238             break
1239         fi
1240
1241         # Invalid host/port pair, Re-enter.
1242         ${ECHO} "ERROR: Invalid host or port: ${IDS_SERVER}:${IDS_PORT}, Please re-enter!"
1243         get_ids_server
1244     done
1245
1246     # Set SERVER_ARGS and LDAP_ARGS since values might of changed.
1247     SERVER_ARGS="-h ${IDS_SERVER} -p ${IDS_PORT}"
1248     LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}"
1249     export SERVER_ARGS
1250 }
1251
1252
1253 #
1254 # chk_ids_version(): Read the slapd config file and set variables
1255 #
1256 chk_ids_version()
1257 {
1258     [ $DEBUG -eq 1 ] && ${ECHO} "In chk_ids_version()"
1259
1260     # check iDS version number.
1261     eval "${LDAPSEARCH} ${SERVER_ARGS} -b cn=monitor -s base \"objectclass=*\" version | ${GREP} \"^version=\" | cut -f2 -d'/' | cut -f1 -d' ' > ${TMPDIR}/checkDSver 2>&1"
1262     if [ $? -ne 0 ]; then
1263         ${ECHO} "ERROR: Can not determine the version number of iDS!"
1264         exit 1
1265     fi
1266     IDS_VER=`cat ${TMPDIR}/checkDSver`
1267     IDS_MAJVER=`${ECHO} ${IDS_VER} | cut -f1 -d.`
1268     IDS_MINVER=`${ECHO} ${IDS_VER} | cut -f2 -d.`
1269     case "${IDS_MAJVER}" in
1270         5|6|7)  : ;;
1271         *)   ${ECHO} "ERROR: $PROG only works with JES DS version 5.x, 6.x or 7.x, not ${IDS_VER}."; exit 1;;
1272     esac
1273
1274     if [ $DEBUG -eq 1 ]; then
1275         ${ECHO} "  IDS_MAJVER = $IDS_MAJVER"
1276         ${ECHO} "  IDS_MINVER = $IDS_MINVER"
1277     fi
1278 }
1279
1280
1281 #
1282 # get_dirmgr_dn(): Get the directory manger DN.
1283 #
1284 get_dirmgr_dn()
1285 {
1286     get_ans "Enter the directory manager DN:" "$LDAP_ROOTDN"
1287     LDAP_ROOTDN=$ANS
1288
1289     # Update ENV variables using DN.
1290     AUTH_ARGS="-D \"${LDAP_ROOTDN}\" -j ${LDAP_ROOTPWF}"
1291     LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}"
1292     export AUTH_ARGS LDAP_ARGS
1293 }
1294
1295
1296 #
1297 # get_dirmgr_pw(): Get the Root DN passwd. (Root DN found in slapd.conf)
1298 #
1299 get_dirmgr_pw()
1300 {
1301     while :
1302     do
1303         # Get passwd.
1304         get_passwd_nochk "Enter passwd for ${LDAP_ROOTDN} :"
1305         LDAP_ROOTPWD=$ANS
1306
1307         # Store password in file.
1308         save_password
1309
1310         # Update ENV variables using DN's PW.
1311         AUTH_ARGS="-D \"${LDAP_ROOTDN}\" -j ${LDAP_ROOTPWF}"
1312         LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}"
1313         export AUTH_ARGS LDAP_ARGS
1314
1315         # Verify that ROOTDN and ROOTPWD are valid.
1316         eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"\" -s base \"objectclass=*\" > ${TMPDIR}/checkDN 2>&1"
1317         if [ $? -ne 0 ]; then
1318             eval "${GREP} credential ${TMPDIR}/checkDN ${VERB}"
1319             if [ $? -eq 0 ]; then
1320                 ${ECHO} "ERROR: Root DN passwd is invalid."
1321             else
1322                 ${ECHO} "ERROR: Invalid Root DN <${LDAP_ROOTDN}>."
1323                 get_dirmgr_dn
1324             fi
1325         else
1326             break         # Both are valid.
1327         fi
1328     done
1329
1330
1331 }
1332
1333
1334 #
1335 # get_domain(): Get the Domain that will be served by the LDAP server.
1336 #               $1 - Help argument.
1337 #
1338 get_domain()
1339 {
1340     # Use LDAP_DOMAIN as default.
1341     get_ans "Enter the domainname to be served (h=help):" $LDAP_DOMAIN
1342
1343     # Check domainname, and have user re-enter if not valid.
1344     check_domainname $ANS
1345     while [ $? -ne 0 ]
1346     do
1347         case "$ANS" in
1348             [Hh] | help | Help | \?) display_msg ${1:-sorry} ;;
1349             * ) ${ECHO} "Invalid domainname: \"${ANS}\"."
1350              ;;
1351         esac
1352         get_ans "Enter domainname to be served (h=help):" $DOM
1353
1354         check_domainname $ANS
1355     done
1356
1357     # Set the domainname to valid name.
1358     LDAP_DOMAIN=$ANS
1359 }
1360
1361
1362 #
1363 # get_basedn(): Query for the Base DN.
1364 #
1365 get_basedn()
1366 {
1367     # Set the $_DOM_2_DC and assign to LDAP_BASEDN as default.
1368     # Then call get_basedn().  This method remakes the default
1369     # each time just in case the domain changed.
1370     domain_2_dc $LDAP_DOMAIN
1371     LDAP_BASEDN=$_DOM_2_DC
1372
1373     # Get Base DN.
1374     while :
1375     do
1376         get_ans_req "Enter LDAP Base DN (h=help):" "${_DOM_2_DC}"
1377         check_baseDN "$ANS"
1378         while [ $? -ne 0 ]
1379         do
1380             case "$ANS" in
1381                 [Hh] | help | Help | \?) display_msg basedn_help ;;
1382                 * ) ${ECHO} "Invalid base DN: \"${ANS}\"."
1383                 ;;
1384             esac
1385
1386             # Re-Enter the BaseDN
1387             get_ans_req "Enter LDAP Base DN (h=help):" "${_DOM_2_DC}"
1388             check_baseDN "$ANS"
1389         done
1390
1391         # Set base DN and check its suffix
1392         LDAP_BASEDN=${ANS}
1393         check_basedn_suffix ||
1394         {
1395                 cleanup
1396                 exit 1
1397         }
1398
1399         # suffix may need to be created, in that case get suffix from user
1400         [ -n "${NEED_CREATE_SUFFIX}" ] &&
1401         {
1402                 get_suffix || continue
1403         }
1404
1405         # suffix is ok, break out of the base dn inquire loop
1406         break
1407     done
1408 }
1409
1410 #
1411 # get_want_shadow_update(): Ask user if want to enable shadow update?
1412 #
1413 get_want_shadow_update()
1414 {
1415     MSG="Do you want to enable shadow update (y/n/h)?"
1416     get_confirm "$MSG" "n" "enable_shadow_update_help"
1417     if [ $? -eq 1 ]; then
1418         LDAP_ENABLE_SHADOW_UPDATE="TRUE"
1419     else
1420         LDAP_ENABLE_SHADOW_UPDATE="FALSE"
1421     fi
1422 }
1423
1424 get_krb_realm() {
1425
1426     # To upper cases
1427     LDAP_KRB_REALM=`${ECHO} ${LDAP_DOMAIN} | ${NAWK} '{ print toupper($0) }'`
1428     get_ans_req "Enter Kerberos Realm:" "$LDAP_KRB_REALM"
1429     # To upper cases
1430     LDAP_KRB_REALM=`${ECHO} ${ANS} | ${NAWK} '{ print toupper($0) }'`
1431 }
1432
1433 # $1: DN
1434 # $2: ldif file
1435 add_entry_by_DN() {
1436
1437     ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${1}\" -s base \"objectclass=*\" ${VERB}"
1438     if [ $? -eq 0 ]; then
1439             ${ECHO} "  ${1} already exists"
1440             return 0
1441     else
1442         ${EVAL} "${LDAPADD} ${LDAP_ARGS} -f ${2} ${VERB}"
1443         if [ $? -eq 0 ]; then
1444                 ${ECHO} "  ${1} is added"
1445                 return 0
1446         else
1447                 ${ECHO} "  ERROR: failed to add ${1}"
1448                 return 1
1449         fi
1450     fi
1451
1452 }
1453 #
1454 # Kerberos princiapl to DN mapping rules
1455 #
1456 # Add rules for host credentails and user credentials
1457 #
1458 add_id_mapping_rules() {
1459
1460     ${ECHO} "  Adding Kerberos principal to DN mapping rules..."
1461
1462     _C_DN="cn=GSSAPI,cn=identity mapping,cn=config"
1463     ( cat << EOF
1464 dn: cn=GSSAPI,cn=identity mapping,cn=config
1465 objectClass: top
1466 objectClass: nsContainer
1467 cn: GSSAPI
1468 EOF
1469 ) > ${TMPDIR}/GSSAPI_container.ldif
1470
1471     add_entry_by_DN "${_C_DN}" "${TMPDIR}/GSSAPI_container.ldif"
1472     if [ $? -ne 0 ];
1473     then
1474         ${RM} ${TMPDIR}/GSSAPI_container.ldif
1475         return
1476     fi
1477
1478     _H_CN="host_auth_${LDAP_KRB_REALM}"
1479     _H_DN="cn=${_H_CN}, ${_C_DN}"
1480     ( cat << EOF
1481 dn: ${_H_DN}
1482 objectClass: top
1483 objectClass: nsContainer
1484 objectClass: dsIdentityMapping
1485 objectClass: dsPatternMatching
1486 cn: ${_H_CN}
1487 dsMatching-pattern: \${Principal}
1488 dsMatching-regexp: host\/(.*).${LDAP_DOMAIN}@${LDAP_KRB_REALM}
1489 dsSearchBaseDN: ou=hosts,${LDAP_BASEDN}
1490 dsSearchFilter: (&(objectClass=ipHost)(cn=\$1))
1491 dsSearchScope: one
1492
1493 EOF
1494 ) > ${TMPDIR}/${_H_CN}.ldif
1495
1496     add_entry_by_DN "${_H_DN}" "${TMPDIR}/${_H_CN}.ldif"
1497
1498     _U_CN="user_auth_${LDAP_KRB_REALM}"
1499     _U_DN="cn=${_U_CN}, ${_C_DN}"
1500     ( cat << EOF
1501 dn: ${_U_DN}
1502 objectClass: top
1503 objectClass: nsContainer
1504 objectClass: dsIdentityMapping
1505 objectClass: dsPatternMatching
1506 cn: ${_U_CN}
1507 dsMatching-pattern: \${Principal}
1508 dsMatching-regexp: (.*)@${LDAP_KRB_REALM}
1509 dsMappedDN: uid=\$1,ou=People,${LDAP_BASEDN}
1510
1511 EOF
1512 ) > ${TMPDIR}/${_U_CN}.ldif
1513
1514     add_entry_by_DN "${_U_DN}" "${TMPDIR}/${_U_CN}.ldif"
1515
1516 }
1517
1518
1519 #
1520 # Modify ACL to allow root to read all the password and only self can read
1521 # its own password when sasl/GSSAPI bind is used
1522 #
1523 modify_userpassword_acl_for_gssapi() {
1524
1525     _P_DN="ou=People,${LDAP_BASEDN}"
1526     _H_DN="ou=Hosts,${LDAP_BASEDN}"
1527     _P_ACI="self-read-pwd"
1528
1529     ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${_P_DN}\" -s base \"objectclass=*\" > /dev/null 2>&1"
1530     if [ $? -ne 0 ]; then
1531             ${ECHO} "  ${_P_DN} does not exist"
1532         # Not Found. Create a new entry
1533         ( cat << EOF
1534 dn: ${_P_DN}
1535 ou: People
1536 objectClass: top
1537 objectClass: organizationalUnit
1538 EOF
1539 ) > ${TMPDIR}/gssapi_people.ldif
1540
1541         add_entry_by_DN "${_P_DN}" "${TMPDIR}/gssapi_people.ldif"
1542     else
1543         ${ECHO} "  ${_P_DN} already exists"
1544     fi
1545
1546     ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${_P_DN}\" -s base \"objectclass=*\" aci > ${TMPDIR}/chk_gssapi_aci 2>&1"
1547
1548     if [ $? -eq 0 ]; then
1549             ${EVAL} "${GREP} ${_P_ACI} ${TMPDIR}/chk_gssapi_aci > /dev/null 2>&1"
1550             if [ $? -eq 0 ]; then
1551                 ${ECHO} "  userpassword ACL ${_P_ACI} already exists."
1552                 return
1553             else
1554                 ${ECHO} "  userpassword ACL ${_P_ACI} not found. Create a new one."
1555             fi
1556     else
1557         ${ECHO} "  Error searching aci for ${_P_DN}"
1558         cat ${TMPDIR}/chk_gssapi_aci
1559         cleanup
1560         exit 1
1561     fi
1562     ( cat << EOF
1563 dn: ${_P_DN}
1564 changetype: modify
1565 add: aci
1566 aci: (targetattr="userPassword")(version 3.0; acl self-read-pwd; allow (read,search) userdn="ldap:///self" and authmethod="sasl GSSAPI";)
1567 -
1568 add: aci
1569 aci: (targetattr="userPassword")(version 3.0; acl host-read-pwd; allow (read,search) userdn="ldap:///cn=*+ipHostNumber=*,ou=Hosts,${LDAP_BASEDN}" and authmethod="sasl GSSAPI";)
1570 EOF
1571 ) > ${TMPDIR}/user_gssapi.ldif
1572     LDAP_TYPE_OR_VALUE_EXISTS=20
1573     ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/user_gssapi.ldif ${VERB}"
1574
1575     case $? in
1576     0)
1577         ${ECHO} "  ${_P_DN} uaserpassword ACL is updated."
1578         ;;
1579     20)
1580         ${ECHO} "  ${_P_DN} uaserpassword ACL already exists."
1581         ;;
1582     *)
1583         ${ECHO} "  ERROR: update of userpassword ACL for ${_P_DN} failed!"
1584         cleanup
1585         exit 1
1586         ;;
1587     esac
1588 }
1589 #
1590 # $1: objectclass or attributetyp
1591 # $2: name
1592 search_update_schema() {
1593
1594     ATTR="${1}es"
1595
1596     ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b cn=schema -s base \"objectclass=*\" ${ATTR} | ${GREP} -i \"${2}\" ${VERB}"
1597     if [ $? -ne 0 ]; then
1598         ${ECHO} "${1} ${2} does not exist."
1599         update_schema_attr
1600         update_schema_obj
1601         SCHEMA_UPDATED=1
1602     else
1603         ${ECHO} "${1} ${2} already exists. Schema has been updated"
1604     fi
1605 }
1606
1607 #
1608 # Set up GSSAPI if necessary
1609 #
1610 gssapi_setup() {
1611
1612         GSSAPI_ENABLE=0
1613
1614         # assume sasl/GSSAPI is supported by the ldap server and may be used
1615         GSSAPI_AUTH_MAY_BE_USED=1
1616
1617         ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"\" -s base \"objectclass=*\" supportedSASLMechanisms | ${GREP} GSSAPI ${VERB}"
1618         if [ $? -ne 0 ]; then
1619                 GSSAPI_AUTH_MAY_BE_USED=0
1620                 ${ECHO} "  sasl/GSSAPI is not supported by this LDAP server"
1621                 return
1622         fi
1623
1624         get_confirm "GSSAPI is supported. Do you want to set up gssapi:(y/n)" "n"
1625         if [ $? -eq 0 ]; then
1626                 GSSAPI_ENABLE=0
1627                 ${ECHO}
1628                 ${ECHO} "GSSAPI is not set up."
1629                 ${ECHO} "sasl/GSSAPI bind may not work if it's not set up first."
1630         else
1631                 GSSAPI_ENABLE=1
1632                 get_krb_realm
1633         fi
1634
1635 }
1636 #
1637 # get_profile_name(): Enter the profile name.
1638 #
1639 get_profile_name()
1640 {
1641     # Reset Delete Old Profile since getting new profile name.
1642     DEL_OLD_PROFILE=0
1643
1644     # Loop until valid profile name, or replace.
1645     while :
1646     do
1647         # Prompt for profile name.
1648         get_ans "Enter the profile name (h=help):" "$LDAP_PROFILE_NAME"
1649
1650         # Check for Help.
1651         case "$ANS" in
1652             [Hh] | help | Help | \?) display_msg profile_help
1653                                      continue ;;
1654             * )  ;;
1655         esac
1656
1657         # Search to see if profile name already exists.
1658         eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${ANS},ou=profile,${LDAP_BASEDN}\" -s base \"objectclass=*\" ${VERB}"
1659         if [ $? -eq 0 ]; then
1660
1661             cat << EOF
1662
1663 Profile '${ANS}' already exists, it is possible to enable
1664 shadow update now. idsconfig will exit after shadow update
1665 is enabled. You can also continue to overwrite the profile
1666 or create a new one and be given the chance to enable
1667 shadow update later.
1668
1669 EOF
1670
1671             MSG="Just enable shadow update (y/n/h)?"
1672             get_confirm "$MSG" "n" "enable_shadow_update_help"
1673             if [ $? -eq 1 ]; then
1674                 [ $DEBUG -eq 1 ] && ${ECHO} "set up shadow update"
1675                 LDAP_ENABLE_SHADOW_UPDATE=TRUE
1676                 # display alternate messages
1677                 EXISTING_PROFILE=1
1678                 # Set Profile Name.
1679                 LDAP_PROFILE_NAME=$ANS
1680                 return 0  # set up credentials for shadow update.
1681             fi
1682
1683             get_confirm_nodef "Are you sure you want to overwrite profile cn=${ANS}?"
1684             if [ $? -eq 1 ]; then
1685                 DEL_OLD_PROFILE=1
1686                 return 0  # Replace old profile name.
1687             else
1688                 ${ECHO} "Please re-enter a new profile name."
1689             fi
1690         else
1691             break  # Unique profile name.
1692         fi
1693     done
1694
1695     # Set Profile Name.
1696     LDAP_PROFILE_NAME=$ANS
1697 }
1698
1699
1700 #
1701 # get_srv_list(): Get the default server list.
1702 #
1703 get_srv_list()
1704 {
1705     # If LDAP_SERVER_LIST is NULL, then set, otherwise leave alone.
1706     if [ -z "${LDAP_SERVER_LIST}" ]; then
1707         LDAP_SERVER_LIST=`getent hosts ${IDS_SERVER} | awk '{print $1}'`
1708         if [ ${IDS_PORT} -ne 389 ]; then
1709             LDAP_SERVER_LIST="${LDAP_SERVER_LIST}:${IDS_PORT}"
1710         fi
1711     fi
1712
1713     # Prompt for new LDAP_SERVER_LIST.
1714     while :
1715     do
1716         get_ans "Default server list (h=help):" $LDAP_SERVER_LIST
1717
1718         # If help continue, otherwise break.
1719         case "$ANS" in
1720             [Hh] | help | Help | \?) display_msg def_srvlist_help ;;
1721             * ) break ;;
1722         esac
1723     done
1724     LDAP_SERVER_LIST=$ANS
1725 }
1726
1727
1728 #
1729 # get_pref_srv(): The preferred server list (Overrides the server list)
1730 #
1731 get_pref_srv()
1732 {
1733     while :
1734     do
1735         get_ans "Preferred server list (h=help):" $LDAP_PREF_SRVLIST
1736
1737         # If help continue, otherwise break.
1738         case "$ANS" in
1739             [Hh] | help | Help | \?) display_msg pref_srvlist_help ;;
1740             * ) break ;;
1741         esac
1742     done
1743     LDAP_PREF_SRVLIST=$ANS
1744 }
1745
1746
1747 #
1748 # get_search_scope(): Get the search scope from the user.
1749 #
1750 get_search_scope()
1751 {
1752     [ $DEBUG -eq 1 ] && ${ECHO} "In get_search_scope()"
1753
1754     _MENU_CHOICE=0
1755     while :
1756     do
1757         get_ans "Choose desired search scope (one, sub, h=help): " "one"
1758         _MENU_CHOICE=$ANS
1759         case "$_MENU_CHOICE" in
1760             one) LDAP_SEARCH_SCOPE="one"
1761                return 1 ;;
1762             sub) LDAP_SEARCH_SCOPE="sub"
1763                return 2 ;;
1764             h) display_msg srch_scope_help ;;
1765             *) ${ECHO} "Please enter \"one\", \"sub\", or \"h\"." ;;
1766         esac
1767     done
1768
1769 }
1770
1771
1772 #
1773 # get_cred_level(): Function to display menu to user and get the
1774 #                  credential level.
1775 #
1776 get_cred_level()
1777 {
1778     [ $DEBUG -eq 1 ] && ${ECHO} "In get_cred_level()"
1779
1780     _MENU_CHOICE=0
1781     display_msg cred_level_menu
1782     while :
1783     do
1784         if [ $GSSAPI_ENABLE -eq 1 ]; then
1785             ${ECHO} '"self" is needed for GSSAPI profile'
1786         fi
1787         get_ans "Choose Credential level [h=help]:" "1"
1788         _MENU_CHOICE=$ANS
1789         case "$_MENU_CHOICE" in
1790             1) LDAP_CRED_LEVEL="anonymous"
1791                return 1 ;;
1792             2) LDAP_CRED_LEVEL="proxy"
1793                return 2 ;;
1794             3) LDAP_CRED_LEVEL="proxy anonymous"
1795                return 3 ;;
1796             4) LDAP_CRED_LEVEL="self"
1797                return 4 ;;
1798             h) display_msg cred_lvl_help ;;
1799             *) ${ECHO} "Please enter 1, 2, 3 or 4." ;;
1800         esac
1801     done
1802 }
1803
1804
1805 #
1806 # srvauth_menu_handler(): Enter the Service Authentication method.
1807 #
1808 srvauth_menu_handler()
1809 {
1810     # Display Auth menu
1811     display_msg srvauth_method_menu
1812
1813     # Get a Valid choice.
1814     while :
1815     do
1816         # Display appropriate prompt and get answer.
1817         if [ $_FIRST -eq 1 ]; then
1818             get_ans "Choose Service Authentication Method:" "1"
1819         else
1820             get_ans "Choose Service Authentication Method (0=reset):"
1821         fi
1822
1823         # Determine choice.
1824         _MENU_CHOICE=$ANS
1825         case "$_MENU_CHOICE" in
1826             1) _AUTHMETHOD="simple"
1827                 break ;;
1828             2) _AUTHMETHOD="sasl/DIGEST-MD5"
1829                 break ;;
1830             3) _AUTHMETHOD="tls:simple"
1831                 break ;;
1832             4) _AUTHMETHOD="tls:sasl/DIGEST-MD5"
1833                 break ;;
1834             5) _AUTHMETHOD="sasl/GSSAPI"
1835                 break ;;
1836             0) _AUTHMETHOD=""
1837                 _FIRST=1
1838                 break ;;
1839             *) ${ECHO} "Please enter 1-5 or 0 to reset." ;;
1840         esac
1841     done
1842 }
1843
1844
1845 #
1846 # auth_menu_handler(): Enter the Authentication method.
1847 #
1848 auth_menu_handler()
1849 {
1850     # Display Auth menu
1851     display_msg auth_method_menu
1852
1853     # Get a Valid choice.
1854     while :
1855     do
1856         if [ $GSSAPI_ENABLE -eq 1 ]; then
1857             ${ECHO} '"sasl/GSSAPI" is needed for GSSAPI profile'
1858         fi
1859         # Display appropriate prompt and get answer.
1860         if [ $_FIRST -eq 1 ]; then
1861             get_ans "Choose Authentication Method (h=help):" "1"
1862         else
1863             get_ans "Choose Authentication Method (0=reset, h=help):"
1864         fi
1865
1866         # Determine choice.
1867         _MENU_CHOICE=$ANS
1868         case "$_MENU_CHOICE" in
1869             1) _AUTHMETHOD="none"
1870                 break ;;
1871             2) _AUTHMETHOD="simple"
1872                 break ;;
1873             3) _AUTHMETHOD="sasl/DIGEST-MD5"
1874                 break ;;
1875             4) _AUTHMETHOD="tls:simple"
1876                 break ;;
1877             5) _AUTHMETHOD="tls:sasl/DIGEST-MD5"
1878                 break ;;
1879             6) _AUTHMETHOD="sasl/GSSAPI"
1880                 break ;;
1881             0) _AUTHMETHOD=""
1882                 _FIRST=1
1883                 break ;;
1884             h) display_msg auth_help ;;
1885             *) ${ECHO} "Please enter 1-6, 0=reset, or h=help." ;;
1886         esac
1887     done
1888 }
1889
1890
1891 #
1892 # get_auth(): Enter the Authentication method.
1893 #
1894 get_auth()
1895 {
1896     [ $DEBUG -eq 1 ] && ${ECHO} "In get_auth()"
1897
1898     _FIRST=1          # Flag for first time.
1899     _MENU_CHOICE=0
1900     _AUTHMETHOD=""    # Tmp method.
1901
1902     while :
1903     do
1904         # Call Menu handler
1905         auth_menu_handler
1906
1907         # Add Auth Method to list.
1908         if [ $_FIRST -eq 1 ]; then
1909             LDAP_AUTHMETHOD="${_AUTHMETHOD}"
1910             _FIRST=0
1911         else
1912             LDAP_AUTHMETHOD="${LDAP_AUTHMETHOD};${_AUTHMETHOD}"
1913         fi
1914
1915         # Display current Authentication Method.
1916         ${ECHO} ""
1917         ${ECHO} "Current authenticationMethod: ${LDAP_AUTHMETHOD}"
1918         ${ECHO} ""
1919
1920         # Prompt for another Auth Method, or break out.
1921         get_confirm_nodef "Do you want to add another Authentication Method?"
1922         if [ $? -eq 0 ]; then
1923             break;
1924         fi
1925     done
1926 }
1927
1928
1929 #
1930 # get_followref(): Whether or not to follow referrals.
1931 #
1932 get_followref()
1933 {
1934     get_confirm "Do you want the clients to follow referrals (y/n/h)?" "n" "referrals_help"
1935     if [ $? -eq 1 ]; then
1936         LDAP_FOLLOWREF="TRUE"
1937     else
1938         LDAP_FOLLOWREF="FALSE"
1939     fi
1940 }
1941
1942
1943 #
1944 # get_timelimit(): Set the time limit. -1 is max time.
1945 #
1946 get_timelimit()
1947 {
1948     # Get current timeout value from cn=config.
1949     eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=config\" -s base \"objectclass=*\" nsslapd-timelimit > ${TMPDIR}/chk_timeout 2>&1"
1950     if [ $? -ne 0 ]; then
1951         ${ECHO} "  ERROR: Could not reach LDAP server to check current timeout!"
1952         cleanup
1953         exit 1
1954     fi
1955     CURR_TIMELIMIT=`${GREP} timelimit ${TMPDIR}/chk_timeout | cut -f2 -d=`
1956
1957     get_negone_num "Enter the time limit for iDS (current=${CURR_TIMELIMIT}):" "-1"
1958     IDS_TIMELIMIT=$NUM
1959 }
1960
1961
1962 #
1963 # get_sizelimit(): Set the size limit. -1 is max size.
1964 #
1965 get_sizelimit()
1966 {
1967     # Get current sizelimit value from cn=config.
1968     eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=config\" -s base \"objectclass=*\" nsslapd-sizelimit > ${TMPDIR}/chk_sizelimit 2>&1"
1969     if [ $? -ne 0 ]; then
1970         ${ECHO} "  ERROR: Could not reach LDAP server to check current sizelimit!"
1971         cleanup
1972         exit 1
1973     fi
1974     CURR_SIZELIMIT=`${GREP} sizelimit ${TMPDIR}/chk_sizelimit | cut -f2 -d=`
1975
1976     get_negone_num "Enter the size limit for iDS (current=${CURR_SIZELIMIT}):" "-1"
1977     IDS_SIZELIMIT=$NUM
1978 }
1979
1980
1981 #
1982 # get_want_crypt(): Ask user if want to store passwords in crypt?
1983 #
1984 get_want_crypt()
1985 {
1986     get_confirm "Do you want to store passwords in \"crypt\" format (y/n/h)?" "n" "crypt_help"
1987     if [ $? -eq 1 ]; then
1988         NEED_CRYPT="TRUE"
1989     else
1990         NEED_CRYPT="FALSE"
1991     fi
1992 }
1993
1994
1995 #
1996 # get_srv_authMethod_pam(): Get the Service Auth Method for pam_ldap from user.
1997 #
1998 #  NOTE: This function is base on get_auth().
1999 #
2000 get_srv_authMethod_pam()
2001 {
2002     [ $DEBUG -eq 1 ] && ${ECHO} "In get_srv_authMethod_pam()"
2003
2004     _FIRST=1          # Flag for first time.
2005     _MENU_CHOICE=0
2006     _AUTHMETHOD=""    # Tmp method.
2007
2008     while :
2009     do
2010         # Call Menu handler
2011         srvauth_menu_handler
2012
2013         # Add Auth Method to list.
2014         if [ $_FIRST -eq 1 ]; then
2015             if [ "$_AUTHMETHOD" = "" ]; then
2016                 LDAP_SRV_AUTHMETHOD_PAM=""
2017             else
2018                 LDAP_SRV_AUTHMETHOD_PAM="pam_ldap:${_AUTHMETHOD}"
2019             fi
2020             _FIRST=0
2021         else
2022             LDAP_SRV_AUTHMETHOD_PAM="${LDAP_SRV_AUTHMETHOD_PAM};${_AUTHMETHOD}"
2023         fi
2024
2025         # Display current Authentication Method.
2026         ${ECHO} ""
2027         ${ECHO} "Current authenticationMethod: ${LDAP_SRV_AUTHMETHOD_PAM}"
2028         ${ECHO} ""
2029
2030         # Prompt for another Auth Method, or break out.
2031         get_confirm_nodef "Do you want to add another Authentication Method?"
2032         if [ $? -eq 0 ]; then
2033             break;
2034         fi
2035     done
2036
2037     # Check in case user reset string and exited loop.
2038     if [ "$LDAP_SRV_AUTHMETHOD_PAM" = "" ]; then
2039         NEED_SRVAUTH_PAM=0
2040     fi
2041 }
2042
2043
2044 #
2045 # get_srv_authMethod_key(): Get the Service Auth Method for keyserv from user.
2046 #
2047 #  NOTE: This function is base on get_auth().
2048 #
2049 get_srv_authMethod_key()
2050 {
2051     [ $DEBUG -eq 1 ] && ${ECHO} "In get_srv_authMethod_key()"
2052
2053     _FIRST=1          # Flag for first time.
2054     _MENU_CHOICE=0
2055     _AUTHMETHOD=""    # Tmp method.
2056
2057     while :
2058     do
2059         # Call Menu handler
2060         srvauth_menu_handler
2061
2062         # Add Auth Method to list.
2063         if [ $_FIRST -eq 1 ]; then
2064             if [ "$_AUTHMETHOD" = "" ]; then
2065                 LDAP_SRV_AUTHMETHOD_KEY=""
2066             else
2067                 LDAP_SRV_AUTHMETHOD_KEY="keyserv:${_AUTHMETHOD}"
2068             fi
2069             _FIRST=0
2070         else
2071             LDAP_SRV_AUTHMETHOD_KEY="${LDAP_SRV_AUTHMETHOD_KEY};${_AUTHMETHOD}"
2072         fi
2073
2074         # Display current Authentication Method.
2075         ${ECHO} ""
2076         ${ECHO} "Current authenticationMethod: ${LDAP_SRV_AUTHMETHOD_KEY}"
2077         ${ECHO} ""
2078
2079         # Prompt for another Auth Method, or break out.
2080         get_confirm_nodef "Do you want to add another Authentication Method?"
2081         if [ $? -eq 0 ]; then
2082             break;
2083         fi
2084     done
2085
2086     # Check in case user reset string and exited loop.
2087     if [ "$LDAP_SRV_AUTHMETHOD_KEY" = "" ]; then
2088         NEED_SRVAUTH_KEY=0
2089     fi
2090 }
2091
2092
2093 #
2094 # get_srv_authMethod_cmd(): Get the Service Auth Method for passwd-cmd from user.
2095 #
2096 #  NOTE: This function is base on get_auth().
2097 #
2098 get_srv_authMethod_cmd()
2099 {
2100     [ $DEBUG -eq 1 ] && ${ECHO} "In get_srv_authMethod_cmd()"
2101
2102     _FIRST=1          # Flag for first time.
2103     _MENU_CHOICE=0
2104     _AUTHMETHOD=""    # Tmp method.
2105
2106     while :
2107     do
2108         # Call Menu handler
2109         srvauth_menu_handler
2110
2111         # Add Auth Method to list.
2112         if [ $_FIRST -eq 1 ]; then
2113             if [ "$_AUTHMETHOD" = "" ]; then
2114                 LDAP_SRV_AUTHMETHOD_CMD=""
2115             else
2116                 LDAP_SRV_AUTHMETHOD_CMD="passwd-cmd:${_AUTHMETHOD}"
2117             fi
2118             _FIRST=0
2119         else
2120             LDAP_SRV_AUTHMETHOD_CMD="${LDAP_SRV_AUTHMETHOD_CMD};${_AUTHMETHOD}"
2121         fi
2122
2123         # Display current Authentication Method.
2124         ${ECHO} ""
2125         ${ECHO} "Current authenticationMethod: ${LDAP_SRV_AUTHMETHOD_CMD}"
2126         ${ECHO} ""
2127
2128         # Prompt for another Auth Method, or break out.
2129         get_confirm_nodef "Do you want to add another Authentication Method?"
2130         if [ $? -eq 0 ]; then
2131             break;
2132         fi
2133     done
2134
2135     # Check in case user reset string and exited loop.
2136     if [ "$LDAP_SRV_AUTHMETHOD_CMD" = "" ]; then
2137         NEED_SRVAUTH_CMD=0
2138     fi
2139 }
2140
2141
2142 #
2143 # get_srch_time(): Amount of time to search.
2144 #
2145 get_srch_time()
2146 {
2147     get_negone_num "Client search time limit in seconds (h=help):" "$LDAP_SEARCH_TIME_LIMIT" "srchtime_help"
2148     LDAP_SEARCH_TIME_LIMIT=$NUM
2149 }
2150
2151
2152 #
2153 # get_prof_ttl(): The profile time to live (TTL)
2154 #
2155 get_prof_ttl()
2156 {
2157     get_negone_num "Profile Time To Live in seconds (h=help):" "$LDAP_PROFILE_TTL" "profttl_help"
2158     LDAP_PROFILE_TTL=$NUM
2159 }
2160
2161
2162 #
2163 # get_bind_limit(): Bind time limit
2164 #
2165 get_bind_limit()
2166 {
2167     get_negone_num "Bind time limit in seconds (h=help):" "$LDAP_BIND_LIMIT" "bindlim_help"
2168     LDAP_BIND_LIMIT=$NUM
2169 }
2170
2171
2172 ######################################################################
2173 # FUNCTIONS  FOR Service Search Descriptor's START HERE.
2174 ######################################################################
2175
2176
2177 #
2178 # add_ssd(): Get SSD's from user and add to file.
2179 #
2180 add_ssd()
2181 {
2182     [ $DEBUG -eq 1 ] && ${ECHO} "In add_ssd()"
2183
2184     # Enter the service id.  Loop til unique.
2185     while :
2186     do
2187         get_ans "Enter the service id:"
2188         _SERV_ID=$ANS
2189
2190         # Grep for name existing.
2191         ${GREP} -i "^$ANS:" ${SSD_FILE} > /dev/null 2>&1
2192         if [ $? -eq 1 ]; then
2193             break
2194         fi
2195
2196         # Name exists, print message, let user decide.
2197         ${ECHO} "ERROR: Service id ${ANS} already exists."
2198     done
2199
2200     get_ans "Enter the base:"
2201     _BASE=$ANS
2202
2203     # Get the scope and verify that its one or sub.
2204     while :
2205     do
2206         get_ans "Enter the scope:"
2207         _SCOPE=$ANS
2208         case `${ECHO} ${_SCOPE} | tr '[A-Z]' '[a-z]'` in
2209             one) break ;;
2210             sub) break ;;
2211             *)   ${ECHO} "${_SCOPE} is Not valid - Enter 'one' or 'sub'" ;;
2212         esac
2213     done
2214
2215     # Build SSD to add to file.
2216     _SSD="${_SERV_ID}:${_BASE}?${_SCOPE}"
2217
2218     # Add the SSD to the file.
2219     ${ECHO} "${_SSD}" >> ${SSD_FILE}
2220 }
2221
2222
2223 #
2224 # delete_ssd(): Delete a SSD from the list.
2225 #
2226 delete_ssd()
2227 {
2228     [ $DEBUG -eq 1 ] && ${ECHO} "In delete_ssd()"
2229
2230     # Get service id name from user for SSD to delete.
2231     get_ans_req "Enter service id to delete:"
2232
2233     # Make sure service id exists.
2234     ${GREP} "$ANS" ${SSD_FILE} > /dev/null 2>&1
2235     if [ $? -eq 1 ]; then
2236         ${ECHO} "Invalid service id: $ANS not present in list."
2237         return
2238     fi
2239
2240     # Create temporary back SSD file.
2241     cp ${SSD_FILE} ${SSD_FILE}.bak
2242     if [ $? -eq 1 ]; then
2243         ${ECHO} "ERROR: could not create file: ${SSD_FILE}.bak"
2244         exit 1
2245     fi
2246
2247     # Use ${GREP} to remove the SSD.  Read from temp file
2248     # and write to the orig file.
2249     ${GREP} -v "$ANS" ${SSD_FILE}.bak > ${SSD_FILE}
2250 }
2251
2252
2253 #
2254 # modify_ssd(): Allow user to modify a SSD.
2255 #
2256 modify_ssd()
2257 {
2258     [ $DEBUG -eq 1 ] && ${ECHO} "In modify_ssd()"
2259
2260     # Prompt user for service id.
2261     get_ans_req "Enter service id to modify:"
2262
2263     # Put into temp _LINE.
2264     _LINE=`${GREP} "^$ANS:" ${SSD_FILE}`
2265     if [ "$_LINE" = "" ]; then
2266         ${ECHO} "Invalid service id: $ANS"
2267         return
2268     fi
2269
2270     # Display current filter for user to see.
2271     ${ECHO} ""
2272     ${ECHO} "Current SSD: $_LINE"
2273     ${ECHO} ""
2274
2275     # Get the defaults.
2276     _CURR_BASE=`${ECHO} $_LINE | cut -d: -f2 | cut -d'?' -f 1`
2277     _CURR_SCOPE=`${ECHO} $_LINE | cut -d: -f2 | cut -d'?' -f 2`
2278
2279     # Create temporary back SSD file.
2280     cp ${SSD_FILE} ${SSD_FILE}.bak
2281     if [ $? -eq 1 ]; then
2282         ${ECHO} "ERROR: could not create file: ${SSD_FILE}.bak"
2283         cleanup
2284         exit 1
2285     fi
2286
2287     # Removed the old line.
2288     ${GREP} -v "^$ANS:" ${SSD_FILE}.bak > ${SSD_FILE} 2>&1
2289
2290     # New Entry
2291     _SERV_ID=$ANS
2292     get_ans_req "Enter the base:" "$_CURR_BASE"
2293     _BASE=$ANS
2294     get_ans_req "Enter the scope:" "$_CURR_SCOPE"
2295     _SCOPE=$ANS
2296
2297     # Build the new SSD.
2298     _SSD="${_SERV_ID}:${_BASE}?${_SCOPE}"
2299
2300     # Add the SSD to the file.
2301     ${ECHO} "${_SSD}" >> ${SSD_FILE}
2302 }
2303
2304
2305 #
2306 # display_ssd(): Display the current SSD list.
2307 #
2308 display_ssd()
2309 {
2310     [ $DEBUG -eq 1 ] && ${ECHO} "In display_ssd()"
2311
2312     ${ECHO} ""
2313     ${ECHO} "Current Service Search Descriptors:"
2314     ${ECHO} "=================================="
2315     cat ${SSD_FILE}
2316     ${ECHO} ""
2317     ${ECHO} "Hit return to continue."
2318     read __A
2319 }
2320
2321
2322 #
2323 # prompt_ssd(): Get SSD's from user.
2324 #
2325 prompt_ssd()
2326 {
2327     [ $DEBUG -eq 1 ] && ${ECHO} "In prompt_ssd()"
2328     # See if user wants SSD's?
2329     get_confirm "Do you wish to setup Service Search Descriptors (y/n/h)?" "n" "ssd_help"
2330     [ "$?" -eq 0 ] && return
2331
2332     # Display menu for SSD choices.
2333     while :
2334     do
2335         display_msg prompt_ssd_menu
2336         get_ans "Enter menu choice:" "Quit"
2337         case "$ANS" in
2338             [Aa] | add) add_ssd ;;
2339             [Dd] | delete) delete_ssd ;;
2340             [Mm] | modify) modify_ssd ;;
2341             [Pp] | print | display) display_ssd ;;
2342             [Xx] | reset | clear) reset_ssd_file ;;
2343             [Hh] | Help | help) display_msg ssd_menu_help
2344                                 ${ECHO} " Press return to continue."
2345                                 read __A ;;
2346             [Qq] | Quit | quit) return ;;
2347             *)    ${ECHO} "Invalid choice: $ANS please re-enter from menu." ;;
2348         esac
2349     done
2350 }
2351
2352
2353 #
2354 # reset_ssd_file(): Blank out current SSD file.
2355 #
2356 reset_ssd_file()
2357 {
2358     [ $DEBUG -eq 1 ] && ${ECHO} "In reset_ssd_file()"
2359
2360     rm -f ${SSD_FILE}
2361     touch ${SSD_FILE}
2362 }
2363
2364
2365 #
2366 # create_ssd_file(): Create a temporary file for SSD's.
2367 #
2368 create_ssd_file()
2369 {
2370     [ $DEBUG -eq 1 ] && ${ECHO} "In create_ssd_file()"
2371
2372     # Build a list of SSD's and store in temp file.
2373     ${GREP} "LDAP_SERV_SRCH_DES=" ${INPUT_FILE} | \
2374         sed 's/LDAP_SERV_SRCH_DES=//' \
2375         > ${SSD_FILE}
2376 }
2377
2378
2379 #
2380 # ssd_2_config(): Append the SSD file to the output file.
2381 #
2382 ssd_2_config()
2383 {
2384     [ $DEBUG -eq 1 ] && ${ECHO} "In ssd_2_config()"
2385
2386     # Convert to config file format using sed.
2387     sed -e "s/^/LDAP_SERV_SRCH_DES=/" ${SSD_FILE} >> ${OUTPUT_FILE}
2388 }
2389
2390
2391 #
2392 # ssd_2_profile(): Add SSD's to the GEN_CMD string.
2393 #
2394 ssd_2_profile()
2395 {
2396     [ $DEBUG -eq 1 ] && ${ECHO} "In ssd_2_profile()"
2397
2398     GEN_TMPFILE=${TMPDIR}/ssd_tmpfile
2399     touch ${GEN_TMPFILE}
2400
2401     # Add and convert each SSD to string.
2402     while read SSD_LINE
2403     do
2404         ${ECHO} " -a \"serviceSearchDescriptor=${SSD_LINE}\"\c" >> ${GEN_TMPFILE}
2405     done <${SSD_FILE}
2406
2407     # Add SSD's to GEN_CMD.
2408     GEN_CMD="${GEN_CMD} `cat ${GEN_TMPFILE}`"
2409 }
2410
2411 #
2412 # get_adminDN(): Get the admin DN.
2413 #
2414 get_adminDN()
2415 {
2416     LDAP_ADMINDN="cn=admin,ou=profile,${LDAP_BASEDN}"  # default
2417     get_ans "Enter DN for the administrator:" "$LDAP_ADMINDN"
2418     LDAP_ADMINDN=$ANS
2419     [ $DEBUG -eq 1 ] && ${ECHO} "LDAP_ADMINDN = $LDAP_ADMINDN"
2420 }
2421
2422 #
2423 # get_admin_pw(): Get the admin passwd.
2424 #
2425 get_admin_pw()
2426 {
2427     get_passwd "Enter passwd for the administrator:"
2428     LDAP_ADMIN_CRED=$ANS
2429     [ $DEBUG -eq 1 ] && ${ECHO} "LDAP_ADMIN_CRED = $LDAP_ADMIN_CRED"
2430 }
2431
2432 #
2433 # add_admin(): Add an admin entry for nameservice for updating shadow data.
2434 #
2435 add_admin()
2436 {
2437     [ $DEBUG -eq 1 ] && ${ECHO} "In add_admin()"
2438
2439     # Check if the admin user already exists.
2440     eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_ADMINDN}\" -s base \"objectclass=*\" ${VERB}"
2441     if [ $? -eq 0 ]; then
2442         MSG="Administrator ${LDAP_ADMINDN} already exists."
2443         if [ $EXISTING_PROFILE -eq 1 ]; then
2444             ${ECHO} "  NOT ADDED: $MSG"
2445         else
2446             ${ECHO} "  ${STEP}. $MSG"
2447             STEP=`expr $STEP + 1`
2448         fi
2449         return 0
2450     fi
2451
2452     # Get cn and sn names from LDAP_ADMINDN.
2453     cn_tmp=`${ECHO} ${LDAP_ADMINDN} | cut -f1 -d, | cut -f2 -d=`
2454
2455     # Create the tmp file to add.
2456     ( cat <<EOF
2457 dn: ${LDAP_ADMINDN}
2458 cn: ${cn_tmp}
2459 sn: ${cn_tmp}
2460 objectclass: top
2461 objectclass: person
2462 userpassword: ${LDAP_ADMIN_CRED}
2463 EOF
2464 ) > ${TMPDIR}/admin
2465
2466     # Add the entry.
2467     ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/admin ${VERB}"
2468     if [ $? -ne 0 ]; then
2469         ${ECHO} "  ERROR: Adding administrator identity failed!"
2470         cleanup
2471         exit 1
2472     fi
2473
2474     ${RM} -f ${TMPDIR}/admin
2475
2476     # Display message that the administrator identity is added.
2477     MSG="Administrator identity ${LDAP_ADMINDN}"
2478     if [ $EXISTING_PROFILE -eq 1 ]; then
2479         ${ECHO} "  ADDED: $MSG."
2480     else
2481         ${ECHO} "  ${STEP}. $MSG added."
2482         STEP=`expr $STEP + 1`
2483     fi
2484 }
2485
2486 #
2487 # allow_admin_read_write_shadow(): Give Admin read/write permission
2488 # to shadow data.
2489 #
2490 allow_admin_read_write_shadow()
2491 {
2492     [ $DEBUG -eq 1 ] && ${ECHO} "In allow_admin_read_write_shadow()"
2493
2494     # Set ACI Name
2495     ADMIN_ACI_NAME="LDAP_Naming_Services_admin_shadow_write"
2496
2497     # Search for ACI_NAME
2498     eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" \
2499     -s base objectclass=* aci > ${TMPDIR}/chk_adminwrite_aci 2>&1"
2500
2501     # if an ACI with ${ADMIN_ACI_NAME} and "write,compare,read,search"
2502     # and ${LDAP_ADMINDN} already exists, we are done
2503     ${EGREP} ".*${ADMIN_ACI_NAME}.*write,compare,read,search.*${LDAP_ADMINDN}.*" \
2504         ${TMPDIR}/chk_adminwrite_aci 2>&1 > /dev/null
2505     if [ $? -eq 0 ]; then
2506         MSG="Admin ACI ${ADMIN_ACI_NAME} already exists for ${LDAP_BASEDN}."
2507         if [ $EXISTING_PROFILE -eq 1 ]; then
2508             ${ECHO} "  NOT SET: $MSG"
2509         else
2510             ${ECHO} "  ${STEP}. $MSG"
2511             STEP=`expr $STEP + 1`
2512         fi
2513         return 0
2514     fi
2515
2516     # If an ACI with ${ADMIN_ACI_NAME} and "(write)" and ${LDAP_ADMINDN}
2517     # already exists, delete it first.
2518     find_and_delete_ACI ".*${ADMIN_ACI_NAME}.*(write).*${LDAP_ADMINDN}.*" \
2519         ${TMPDIR}/chk_adminwrite_aci ${ADMIN_ACI_NAME}
2520
2521     # Create the tmp file to add.
2522     ( cat <<EOF
2523 dn: ${LDAP_BASEDN}
2524 changetype: modify
2525 add: aci
2526 aci: (target="ldap:///${LDAP_BASEDN}")(targetattr="shadowLastChange
2527  ||shadowMin||shadowMax||shadowWarning||shadowInactive||shadowExpire
2528  ||shadowFlag||userPassword||loginShell||homeDirectory||gecos")
2529   (version 3.0; acl ${ADMIN_ACI_NAME}; allow (write,compare,read,search)
2530   userdn = "ldap:///${LDAP_ADMINDN}";)
2531 EOF
2532 ) > ${TMPDIR}/admin_write
2533
2534     # Add the entry.
2535     ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/admin_write ${VERB}"
2536     if [ $? -ne 0 ]; then
2537         ${ECHO} "  ERROR: Allow ${LDAP_ADMINDN} read/write access to shadow data failed!"
2538         cleanup
2539         exit 1
2540     fi
2541
2542     ${RM} -f ${TMPDIR}/admin_write
2543     # Display message that the administrator ACL is set.
2544     MSG="Give ${LDAP_ADMINDN} read/write access to shadow data."
2545     if [ $EXISTING_PROFILE -eq 1 ]; then
2546         ${ECHO} "  ACI SET: $MSG"
2547     else
2548         ${ECHO} "  ${STEP}. $MSG"
2549         STEP=`expr $STEP + 1`
2550     fi
2551 }
2552
2553 #
2554 # allow_host_read_write_shadow(): Give host principal read/write permission
2555 # for shadow data.
2556 #
2557 allow_host_read_write_shadow()
2558 {
2559     [ $DEBUG -eq 1 ] && ${ECHO} "In allow_host_read_write_shadow()"
2560
2561     # Set ACI Name
2562     HOST_ACI_NAME="LDAP_Naming_Services_host_shadow_write"
2563
2564     # Search for ACI_NAME
2565     eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base objectclass=* aci > ${TMPDIR}/chk_hostwrite_aci 2>&1"
2566     ${GREP} "${HOST_ACI_NAME}" ${TMPDIR}/chk_hostwrite_aci > /dev/null 2>&1
2567     if [ $? -eq 0 ]; then
2568         MSG="Host ACI ${HOST_ACI_NAME} already exists for ${LDAP_BASEDN}."
2569         if [ $EXISTING_PROFILE -eq 1 ]; then
2570             ${ECHO} "  NOT ADDED: $MSG"
2571         else
2572             ${ECHO} "  ${STEP}. $MSG"
2573             STEP=`expr $STEP + 1`
2574         fi
2575         return 0
2576     fi
2577
2578     # Create the tmp file to add.
2579     ( cat <<EOF
2580 dn: ${LDAP_BASEDN}
2581 changetype: modify
2582 add: aci
2583 aci: (target="ldap:///${LDAP_BASEDN}")(targetattr="shadowLastChange||shadowMin||shadowMax||shadowWarning||shadowInactive||shadowExpire||shadowFlag||userPassword||loginShell||homeDirectory||gecos")(version 3.0; acl ${HOST_ACI_NAME}; allow (write,compare,read,search) authmethod="sasl GSSAPI" and userdn = "ldap:///cn=*+ipHostNumber=*,ou=Hosts,${LDAP_BASEDN}";)
2584 EOF
2585 ) > ${TMPDIR}/host_read_write
2586
2587     # Add the entry.
2588     ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/host_read_write ${VERB}"
2589     if [ $? -ne 0 ]; then
2590         ${ECHO} "  ERROR: Allow Host Principal to write shadow data failed!"
2591         cleanup
2592         exit 1
2593     fi
2594
2595     ${RM} -f ${TMPDIR}/host_read_write
2596     MSG="Give host principal read/write permission for shadow."
2597     if [ $EXISTING_PROFILE -eq 1 ]; then
2598         ${ECHO} "  ACI SET: $MSG"
2599     else
2600         ${ECHO} "  ${STEP}. $MSG"
2601         STEP=`expr $STEP + 1`
2602     fi
2603 }
2604
2605 #
2606 # Set up shadow update
2607 #
2608 setup_shadow_update() {
2609     [ $DEBUG -eq 1 ] && ${ECHO} "In setup_shadow_update()"
2610
2611     # get content of the profile
2612     PROFILE_OUT=${TMPDIR}/prof_tmpfile
2613     ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${LDAP_PROFILE_NAME},ou=profile,${LDAP_BASEDN}\" -s base \"objectclass=*\" > $PROFILE_OUT 2>&1"
2614     ${GREP} -i cn $PROFILE_OUT >/dev/null 2>&1
2615     if [ $? -ne 0 ]; then
2616         [ $DEBUG -eq 1 ] && ${ECHO} "Profile ${LDAP_PROFILE_NAME} does not exist"
2617         ${RM} ${PROFILE_OUT}
2618         return
2619     fi
2620
2621     # Search to see if authenticationMethod has 'GSSAPI' and
2622     # credentialLevel has 'self'. If so, ask to use the
2623     # host principal for shadow update
2624     if [ $GSSAPI_AUTH_MAY_BE_USED -eq 1 ]; then
2625         if ${GREP} authenticationMethod $PROFILE_OUT | ${GREP} GSSAPI >/dev/null 2>&1
2626         then
2627             if ${GREP} credentialLevel $PROFILE_OUT | ${GREP} self >/dev/null 2>&1
2628             then
2629                 NEED_HOSTACL=1
2630             fi
2631         fi
2632         ${RM} ${PROFILE_OUT}
2633         [ $DEBUG -eq 1 ] && ${ECHO} "NEED_HOSTACL = $NEED_HOSTACL"
2634
2635         if [ $NEED_HOSTACL -eq 1 ]; then
2636             MSG="Use host principal for shadow data update (y/n/h)?"
2637             get_confirm "$MSG" "y" "use_host_principal_help"
2638             if [ $? -eq 1 ]; then
2639                 delete_proxy_read_pw
2640                 allow_host_read_write_shadow
2641                 deny_non_host_shadow_access
2642                 ${ECHO} ""
2643                 ${ECHO} "  Shadow update has been enabled."
2644             else
2645                 ${ECHO} ""
2646                 ${ECHO} "  Shadow update may not work."
2647             fi
2648             return
2649         fi
2650     fi
2651
2652     MSG="Add the administrator identity (y/n/h)?"
2653     get_confirm "$MSG" "y" "add_admin_cred_help"
2654     if [ $? -eq 1 ]; then
2655         get_adminDN
2656         get_admin_pw
2657         add_admin
2658         delete_proxy_read_pw
2659         allow_admin_read_write_shadow
2660         deny_non_admin_shadow_access
2661         ${ECHO} ""
2662         ${ECHO} "  Shadow update has been enabled."
2663         return
2664     fi
2665
2666     ${ECHO} "  No administrator identity specified, shadow update may not work."
2667 }
2668
2669
2670 #
2671 # prompt_config_info(): This function prompts the user for the config
2672 # info that is not specified in the input file.
2673 #
2674 prompt_config_info()
2675 {
2676     [ $DEBUG -eq 1 ] && ${ECHO} "In prompt_config_info()"
2677
2678     # Prompt for iDS server name.
2679     get_ids_server
2680
2681     # Prompt for iDS port number.
2682     get_ids_port
2683
2684     # Check iDS version for compatibility.
2685     chk_ids_version
2686
2687     # Check if the server supports the VLV.
2688     chk_vlv_indexes
2689
2690     # Get the Directory manager DN and passwd.
2691     get_dirmgr_dn
2692     get_dirmgr_pw
2693
2694     #
2695     # LDAP CLIENT PROFILE SPECIFIC INFORMATION.
2696     #   (i.e. The fields that show up in the profile.)
2697     #
2698     get_domain "domain_help"
2699
2700     get_basedn
2701
2702     gssapi_setup
2703
2704     get_profile_name
2705
2706     if [ "$LDAP_ENABLE_SHADOW_UPDATE" = "TRUE" ];then
2707         setup_shadow_update
2708         cleanup
2709         exit 0
2710     fi
2711
2712     get_srv_list
2713     get_pref_srv
2714     get_search_scope
2715
2716     # If cred is "anonymous", make auth == "none"
2717     get_cred_level
2718     if [ "$LDAP_CRED_LEVEL" != "anonymous" ]; then
2719         get_auth
2720     fi
2721
2722     get_followref
2723
2724     # Query user about timelimt.
2725     get_confirm "Do you want to modify the server timelimit value (y/n/h)?" "n" "tlim_help"
2726     NEED_TIME=$?
2727     [ $NEED_TIME -eq 1 ] && get_timelimit
2728
2729     # Query user about sizelimit.
2730     get_confirm "Do you want to modify the server sizelimit value (y/n/h)?" "n" "slim_help"
2731     NEED_SIZE=$?
2732     [ $NEED_SIZE -eq 1 ] && get_sizelimit
2733
2734     # Does the user want to store passwords in crypt format?
2735     get_want_crypt
2736
2737     # Prompt for any Service Authentication Methods?
2738     get_confirm "Do you want to setup a Service Authentication Methods (y/n/h)?" "n" "srvauth_help"
2739     if [ $? -eq 1 ]; then
2740         # Does the user want to set Service Authentication Method for pam_ldap?
2741         get_confirm "Do you want to setup a Service Auth. Method for \"pam_ldap\" (y/n/h)?" "n" "pam_ldap_help"
2742         NEED_SRVAUTH_PAM=$?
2743         [ $NEED_SRVAUTH_PAM -eq 1 ] && get_srv_authMethod_pam
2744
2745         # Does the user want to set Service Authentication Method for keyserv?
2746         get_confirm "Do you want to setup a Service Auth. Method for \"keyserv\" (y/n/h)?" "n" "keyserv_help"
2747         NEED_SRVAUTH_KEY=$?
2748         [ $NEED_SRVAUTH_KEY -eq 1 ] && get_srv_authMethod_key
2749
2750         # Does the user want to set Service Authentication Method for passwd-cmd?
2751         get_confirm "Do you want to setup a Service Auth. Method for \"passwd-cmd\" (y/n/h)?" "n" "passwd-cmd_help"
2752         NEED_SRVAUTH_CMD=$?
2753         [ $NEED_SRVAUTH_CMD -eq 1 ] && get_srv_authMethod_cmd
2754     fi
2755
2756
2757     # Get Timeouts
2758     get_srch_time
2759     get_prof_ttl
2760     get_bind_limit
2761
2762     # Ask whether to enable shadow update
2763     get_want_shadow_update
2764
2765     # Reset the sdd_file and prompt user for SSD.  Will use menus
2766     # to build an SSD File.
2767     reset_ssd_file
2768     prompt_ssd
2769
2770     # Display FULL debugging info.
2771     disp_full_debug
2772
2773     # Extra blank line to separate prompt lines from steps.
2774     ${ECHO} " "
2775 }
2776
2777
2778 ######################################################################
2779 # FUNCTIONS  FOR display_summary() START HERE.
2780 ######################################################################
2781
2782
2783 #
2784 # get_proxyagent(): Get the proxyagent DN.
2785 #
2786 get_proxyagent()
2787 {
2788     LDAP_PROXYAGENT="cn=proxyagent,ou=profile,${LDAP_BASEDN}"  # default
2789     get_ans "Enter DN for proxy agent:" "$LDAP_PROXYAGENT"
2790     LDAP_PROXYAGENT=$ANS
2791 }
2792
2793
2794 #
2795 # get_proxy_pw(): Get the proxyagent passwd.
2796 #
2797 get_proxy_pw()
2798 {
2799     get_passwd "Enter passwd for proxyagent:"
2800     LDAP_PROXYAGENT_CRED=$ANS
2801 }
2802
2803 #
2804 # display_summary(): Display a summary of values entered and let the
2805 #                    user modify values at will.
2806 #
2807 display_summary()
2808 {
2809     [ $DEBUG -eq 1 ] && ${ECHO} "In display_summary()"
2810
2811     # Create lookup table for function names.  First entry is dummy for
2812     # shift.
2813     TBL1="dummy"
2814     TBL2="get_domain get_basedn get_profile_name"
2815     TBL3="get_srv_list get_pref_srv get_search_scope get_cred_level"
2816     TBL4="get_auth get_followref"
2817     TBL5="get_timelimit get_sizelimit get_want_crypt"
2818     TBL6="get_srv_authMethod_pam get_srv_authMethod_key get_srv_authMethod_cmd"
2819     TBL7="get_srch_time get_prof_ttl get_bind_limit"
2820     TBL8="get_want_shadow_update"
2821     TBL9="prompt_ssd"
2822     FUNC_TBL="$TBL1 $TBL2 $TBL3 $TBL4 $TBL5 $TBL6 $TBL7 $TBL8 $TBL9"
2823
2824     # Since menu prompt string is long, set here.
2825     _MENU_PROMPT="Enter config value to change: (1-20 0=commit changes)"
2826
2827     # Infinite loop.  Test for 0, and break in loop.
2828     while :
2829     do
2830         # Display menu and get value in range.
2831         display_msg summary_menu
2832         get_menu_choice "${_MENU_PROMPT}" "0" "20" "0"
2833         _CH=$MN_CH
2834
2835         # Make sure where not exiting.
2836         if [ $_CH -eq 0 ]; then
2837             break       # Break out of loop if 0 selected.
2838         fi
2839
2840         # Call appropriate function from function table.
2841         set $FUNC_TBL
2842         shift $_CH
2843         $1          # Call the appropriate function.
2844     done
2845
2846     # If cred level is still see if user wants a change?
2847     if ${ECHO} "$LDAP_CRED_LEVEL" | ${GREP} "proxy" > /dev/null 2>&1
2848     then
2849         if [ "$LDAP_AUTHMETHOD" != "none" ]; then
2850             NEED_PROXY=1    # I assume integer test is faster?
2851             get_proxyagent
2852             get_proxy_pw
2853         else
2854             ${ECHO} "WARNING: Since Authentication method is 'none'."
2855             ${ECHO} "         Credential level will be set to 'anonymous'."
2856             LDAP_CRED_LEVEL="anonymous"
2857         fi
2858     fi
2859
2860     # If shadow update is enabled, set up administrator credential
2861     if [ "$LDAP_ENABLE_SHADOW_UPDATE" = "TRUE" ]; then
2862         NEED_ADMIN=1
2863         if ${ECHO} "$LDAP_CRED_LEVEL" | ${GREP} "self" > /dev/null 2>&1; then
2864             if ${ECHO} "$LDAP_AUTHMETHOD" | ${GREP} "GSSAPI" > /dev/null 2>&1; then
2865                 NEED_HOSTACL=1
2866                 NEED_ADMIN=0
2867             fi
2868         fi
2869         [ $DEBUG -eq 1 ] && ${ECHO} "NEED_HOSTACL = $NEED_HOSTACL"
2870         [ $DEBUG -eq 1 ] && ${ECHO} "NEED_ADMIN   = $NEED_ADMIN"
2871         if [ $NEED_ADMIN -eq 1 ]; then
2872             get_adminDN
2873             get_admin_pw
2874         fi
2875     fi
2876
2877     # Display FULL debugging info.
2878     disp_full_debug
2879
2880     # Final confirmation message. (ARE YOU SURE!)
2881     ${ECHO} " "
2882     get_confirm_nodef "WARNING: About to start committing changes. (y=continue, n=EXIT)"
2883     if [ $? -eq 0 ]; then
2884         ${ECHO} "Terminating setup without making changes at users request."
2885         cleanup
2886         exit 1
2887     fi
2888
2889     # Print newline
2890     ${ECHO} " "
2891 }
2892
2893
2894 #
2895 # create_config_file(): Write config data to config file specified.
2896 #
2897 create_config_file()
2898 {
2899     [ $DEBUG -eq 1 ] && ${ECHO} "In create_config_file()"
2900
2901     # If output file exists, delete it.
2902     [ -f $OUTPUT_FILE ] && rm $OUTPUT_FILE
2903
2904     # Create output file.
2905     cat > $OUTPUT_FILE <<EOF
2906 #!/bin/sh
2907 # $OUTPUT_FILE - This file contains configuration information for
2908 #                Native LDAP.  Use the idsconfig tool to load it.
2909 #
2910 # WARNING: This file was generated by idsconfig, and is intended to
2911 #          be loaded by idsconfig as is.  DO NOT EDIT THIS FILE!
2912 #
2913 IDS_SERVER="$IDS_SERVER"
2914 IDS_PORT=$IDS_PORT
2915 IDS_TIMELIMIT=$IDS_TIMELIMIT
2916 IDS_SIZELIMIT=$IDS_SIZELIMIT
2917 LDAP_ROOTDN="$LDAP_ROOTDN"
2918 LDAP_ROOTPWD=$LDAP_ROOTPWD
2919 LDAP_DOMAIN="$LDAP_DOMAIN"
2920 LDAP_SUFFIX="$LDAP_SUFFIX"
2921 GSSAPI_ENABLE=$GSSAPI_ENABLE
2922 LDAP_KRB_REALM="$LDAP_KRB_REALM"
2923
2924 # Internal program variables that need to be set.
2925 NEED_PROXY=$NEED_PROXY
2926 NEED_TIME=$NEED_TIME
2927 NEED_SIZE=$NEED_SIZE
2928 NEED_CRYPT=$NEED_CRYPT
2929 NEED_ADMIN=$NEED_ADMIN
2930 NEED_HOSTACL=$NEED_HOSTACL
2931 EXISTING_PROFILE=$EXISTING_PROFILE
2932
2933 # LDAP PROFILE related defaults
2934 LDAP_PROFILE_NAME="$LDAP_PROFILE_NAME"
2935 DEL_OLD_PROFILE=1
2936 LDAP_BASEDN="$LDAP_BASEDN"
2937 LDAP_SERVER_LIST="$LDAP_SERVER_LIST"
2938 LDAP_AUTHMETHOD="$LDAP_AUTHMETHOD"
2939 LDAP_FOLLOWREF=$LDAP_FOLLOWREF
2940 LDAP_SEARCH_SCOPE="$LDAP_SEARCH_SCOPE"
2941 NEED_SRVAUTH_PAM=$NEED_SRVAUTH_PAM
2942 NEED_SRVAUTH_KEY=$NEED_SRVAUTH_KEY
2943 NEED_SRVAUTH_CMD=$NEED_SRVAUTH_CMD
2944 LDAP_SRV_AUTHMETHOD_PAM="$LDAP_SRV_AUTHMETHOD_PAM"
2945 LDAP_SRV_AUTHMETHOD_KEY="$LDAP_SRV_AUTHMETHOD_KEY"
2946 LDAP_SRV_AUTHMETHOD_CMD="$LDAP_SRV_AUTHMETHOD_CMD"
2947 LDAP_SEARCH_TIME_LIMIT=$LDAP_SEARCH_TIME_LIMIT
2948 LDAP_PREF_SRVLIST="$LDAP_PREF_SRVLIST"
2949 LDAP_PROFILE_TTL=$LDAP_PROFILE_TTL
2950 LDAP_CRED_LEVEL="$LDAP_CRED_LEVEL"
2951 LDAP_BIND_LIMIT=$LDAP_BIND_LIMIT
2952
2953 # Proxy Agent
2954 LDAP_PROXYAGENT="$LDAP_PROXYAGENT"
2955 LDAP_PROXYAGENT_CRED=$LDAP_PROXYAGENT_CRED
2956
2957 # enableShadowUpdate flag and Administrator credential
2958 LDAP_ENABLE_SHADOW_UPDATE=$LDAP_ENABLE_SHADOW_UPDATE
2959 LDAP_ADMINDN="$LDAP_ADMINDN"
2960 LDAP_ADMIN_CRED=$LDAP_ADMIN_CRED
2961
2962 # Export all the variables (just in case)
2963 export IDS_HOME IDS_PORT LDAP_ROOTDN LDAP_ROOTPWD LDAP_SERVER_LIST LDAP_BASEDN
2964 export LDAP_DOMAIN LDAP_SUFFIX LDAP_PROXYAGENT LDAP_PROXYAGENT_CRED
2965 export NEED_PROXY
2966 export LDAP_ENABLE_SHADOW_UPDATE LDAP_ADMINDN LDAP_ADMIN_CRED
2967 export NEED_ADMIN NEED_HOSTACL EXISTING_PROFILE
2968 export LDAP_PROFILE_NAME LDAP_BASEDN LDAP_SERVER_LIST
2969 export LDAP_AUTHMETHOD LDAP_FOLLOWREF LDAP_SEARCH_SCOPE LDAP_SEARCH_TIME_LIMIT
2970 export LDAP_PREF_SRVLIST LDAP_PROFILE_TTL LDAP_CRED_LEVEL LDAP_BIND_LIMIT
2971 export NEED_SRVAUTH_PAM NEED_SRVAUTH_KEY NEED_SRVAUTH_CMD
2972 export LDAP_SRV_AUTHMETHOD_PAM LDAP_SRV_AUTHMETHOD_KEY LDAP_SRV_AUTHMETHOD_CMD
2973 export LDAP_SERV_SRCH_DES SSD_FILE GSSAPI_ENABLE LDAP_KRB_REALM
2974
2975 # Service Search Descriptors start here if present:
2976 EOF
2977     # Add service search descriptors.
2978     ssd_2_config "${OUTPUT_FILE}"
2979
2980     # Add LDAP suffix preferences
2981     print_suffix_config >> "${OUTPUT_FILE}"
2982
2983     # Add the end of FILE tag.
2984     ${ECHO} "" >> ${OUTPUT_FILE}
2985     ${ECHO} "# End of $OUTPUT_FILE" >> ${OUTPUT_FILE}
2986 }
2987
2988
2989 #
2990 # chk_vlv_indexes(): Do ldapsearch to see if server supports VLV.
2991 #
2992 chk_vlv_indexes()
2993 {
2994     # Do ldapsearch to see if server supports VLV.
2995     ${LDAPSEARCH} ${SERVER_ARGS} -b "" -s base "objectclass=*" > ${TMPDIR}/checkVLV 2>&1
2996     eval "${GREP} 2.16.840.1.113730.3.4.9 ${TMPDIR}/checkVLV ${VERB}"
2997     if [ $? -ne 0 ]; then
2998         ${ECHO} "ERROR: VLV is not supported on LDAP server!"
2999         cleanup
3000         exit 1
3001     fi
3002     [ $DEBUG -eq 1 ] && ${ECHO} "  VLV controls found on LDAP server."
3003 }
3004
3005 #
3006 # get_backend(): this function gets the relevant backend
3007 #                (database) for LDAP_BASED.
3008 #                Description: set IDS_DATABASE; exit on failure.
3009 #                Prerequisite: LDAP_BASEDN and LDAP_SUFFIX are
3010 #                valid.
3011 #
3012 #                backend is retrieved from suffixes and subsuffixes
3013 #                defined under "cn=mapping tree,cn=config". The
3014 #                nsslapd-state attribute of these suffixes entries
3015 #                is filled with either Backend, Disabled or referrals
3016 #                related values. We only want those that have a true
3017 #                backend database to select the relevant backend.
3018 #
3019 get_backend()
3020 {
3021     [ $DEBUG -eq 1 ] && ${ECHO} "In get_backend()"
3022
3023     cur_suffix=${LDAP_BASEDN}
3024     prev_suffix=
3025     IDS_DATABASE=
3026     while [ "${cur_suffix}" != "${prev_suffix}" ]
3027     do
3028         [ $DEBUG -eq 1 ] && ${ECHO} "testing LDAP suffix: ${cur_suffix}"
3029         eval "${LDAPSEARCH} ${LDAP_ARGS} " \
3030                 "-b \"cn=\\\"${cur_suffix}\\\",cn=mapping tree,cn=config\" " \
3031                 "-s base nsslapd-state=Backend nsslapd-backend 2>&1 " \
3032                 "| ${GREP} 'nsslapd-backend=' " \
3033                 "> ${TMPDIR}/ids_database_name 2>&1"
3034         NUM_DBS=`wc -l ${TMPDIR}/ids_database_name | awk '{print $1}'`
3035         case ${NUM_DBS} in
3036         0) # not a suffix, or suffix not activated; try next
3037             prev_suffix=${cur_suffix}
3038             cur_suffix=`${ECHO} ${cur_suffix} | cut -f2- -d','`
3039             ;;
3040         1) # suffix found; get database name
3041             IDS_DATABASE=`cat ${TMPDIR}/ids_database_name | cut -d= -f2`
3042             ;;
3043         *) # can not handle more than one database per suffix
3044             ${ECHO} "ERROR: More than one database is configured "
3045             ${ECHO} "       for $LDAP_SUFFIX!"
3046             ${ECHO} "       $PROG can not configure suffixes where "
3047             ${ECHO} "       more than one database is used for one suffix."
3048             cleanup
3049             exit 1
3050             ;;
3051         esac
3052         if [ -n "${IDS_DATABASE}" ]; then
3053             break
3054         fi
3055     done
3056
3057     if [ -z "${IDS_DATABASE}" ]; then
3058         # should not happen, since LDAP_BASEDN is supposed to be valid
3059         ${ECHO} "Could not find a valid backend for ${LDAP_BASEDN}."
3060         ${ECHO} "Exiting."
3061         cleanup
3062         exit 1
3063     fi
3064
3065     [ $DEBUG -eq 1 ] && ${ECHO} "IDS_DATABASE: ${IDS_DATABASE}"
3066 }
3067
3068 #
3069 # validate_suffix(): This function validates ${LDAP_SUFFIX}
3070 #                  THIS FUNCTION IS FOR THE LOAD CONFIG FILE OPTION.
3071 #
3072 validate_suffix()
3073 {
3074     [ $DEBUG -eq 1 ] && ${ECHO} "In validate_suffix()"
3075
3076     # Check LDAP_SUFFIX is not null
3077     if [ -z "${LDAP_SUFFIX}" ]; then
3078         ${ECHO} "Invalid suffix (null suffix)"
3079         cleanup
3080         exit 1
3081     fi
3082
3083     # Check LDAP_SUFFIX and LDAP_BASEDN are consistent
3084     # Convert to lower case for basename.
3085     format_string "${LDAP_BASEDN}"
3086     LOWER_BASEDN="${FMT_STR}"
3087     format_string "${LDAP_SUFFIX}"
3088     LOWER_SUFFIX="${FMT_STR}"
3089
3090     [ $DEBUG -eq 1 ] && ${ECHO} "LOWER_BASEDN: ${LOWER_BASEDN}"
3091     [ $DEBUG -eq 1 ] && ${ECHO} "LOWER_SUFFIX: ${LOWER_SUFFIX}"
3092
3093     if [ "${LOWER_BASEDN}" != "${LOWER_SUFFIX}" ]; then
3094         sub_basedn=`basename "${LOWER_BASEDN}" "${LOWER_SUFFIX}"`
3095         if [ "$sub_basedn" = "${LOWER_BASEDN}" ]; then
3096             ${ECHO} "Invalid suffix ${LOWER_SUFFIX}"
3097             ${ECHO} "for Base DN ${LOWER_BASEDN}"
3098             cleanup
3099             exit 1
3100         fi
3101     fi
3102
3103     # Check LDAP_SUFFIX does exist
3104     ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_SUFFIX}\" -s base \"objectclass=*\" > ${TMPDIR}/checkSuffix 2>&1" && return 0
3105
3106     # Well, suffix does not exist, try to prepare create it ...
3107     NEED_CREATE_SUFFIX=1
3108     prep_create_sfx_entry ||
3109     {
3110         cleanup
3111         exit 1
3112     }
3113     [ -n "${NEED_CREATE_BACKEND}" ] &&
3114     {
3115         # try to use id attr value of the suffix as a database name
3116         IDS_DATABASE=${_VAL}
3117         prep_create_sfx_backend
3118         case $? in
3119         1)      # cann't use the name we want, so we can either exit or use
3120                 # some another available name - doing the last ...
3121                 IDS_DATABASE=${IDS_DATABASE_AVAIL}
3122                 ;;
3123         2)      # unable to determine database name
3124                 cleanup
3125                 exit 1
3126                 ;;
3127         esac
3128     }
3129
3130     [ $DEBUG -eq 1 ] && ${ECHO} "Suffix $LDAP_SUFFIX, Database $IDS_DATABASE"
3131 }
3132
3133 #
3134 # validate_info(): This function validates the basic info collected
3135 #                  So that some problems are caught right away.
3136 #                  THIS FUNCTION IS FOR THE LOAD CONFIG FILE OPTION.
3137 #
3138 validate_info()
3139 {
3140     [ $DEBUG -eq 1 ] && ${ECHO} "In validate_info()"
3141
3142     # Set SERVER_ARGS, AUTH_ARGS, and LDAP_ARGS for the config file.
3143     SERVER_ARGS="-h ${IDS_SERVER} -p ${IDS_PORT}"
3144     AUTH_ARGS="-D \"${LDAP_ROOTDN}\" -j ${LDAP_ROOTPWF}"
3145     LDAP_ARGS="${SERVER_ARGS} ${AUTH_ARGS}"
3146     export SERVER_ARGS
3147
3148     # Check the Root DN and Root DN passwd.
3149     # Use eval instead of $EVAL because not part of setup. (validate)
3150     eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"\" -s base \"objectclass=*\" > ${TMPDIR}/checkDN 2>&1"
3151     if [ $? -ne 0 ]; then
3152         eval "${GREP} credential ${TMPDIR}/checkDN ${VERB}"
3153         if [ $? -eq 0 ]; then
3154             ${ECHO} "ERROR: Root DN passwd is invalid."
3155         else
3156             ${ECHO} "ERROR2: Invalid Root DN <${LDAP_ROOTDN}>."
3157         fi
3158         cleanup
3159         exit 1
3160     fi
3161     [ $DEBUG -eq 1 ] && ${ECHO} "  RootDN ... OK"
3162     [ $DEBUG -eq 1 ] && ${ECHO} "  RootDN passwd ... OK"
3163
3164     # Check if the server supports the VLV.
3165     chk_vlv_indexes
3166     [ $DEBUG -eq 1 ] && ${ECHO} "  VLV indexes ... OK"
3167
3168     # Check LDAP suffix
3169     validate_suffix
3170     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP suffix ... OK"
3171 }
3172
3173 #
3174 # format_string(): take a string as argument and set FMT_STR
3175 # to be the same string formatted as follow:
3176 # - only lower case characters
3177 # - no unnecessary spaces around , and =
3178 #
3179 format_string()
3180 {
3181     FMT_STR=`${ECHO} "$1" | tr '[A-Z]' '[a-z]' |
3182         sed -e 's/[ ]*,[ ]*/,/g' -e 's/[ ]*=[ ]*/=/g'`
3183 }
3184
3185 #
3186 # prepare for the suffix entry creation
3187 #
3188 # input  : LDAP_BASEDN, LDAP_SUFFIX - base dn and suffix;
3189 # in/out : LDAP_SUFFIX_OBJ, LDAP_SUFFIX_ACI - initially may come from config.
3190 # output : NEED_CREATE_BACKEND - backend for this suffix needs to be created;
3191 #          _RDN, _ATT, _VAL - suffix's RDN, id attribute name and its value.
3192 # return : 0 - success, otherwise error.
3193 #
3194 prep_create_sfx_entry()
3195 {
3196     [ $DEBUG -eq 1 ] && ${ECHO} "In prep_create_sfx_entry()"
3197
3198     # check whether suffix corresponds to base dn
3199     format_string "${LDAP_BASEDN}"
3200     ${ECHO} ",${FMT_STR}" | ${GREP} ",${LDAP_SUFFIX}$" >/dev/null 2>&1 ||
3201     {
3202         display_msg sfx_not_suitable
3203         return 1
3204     }
3205
3206     # parse LDAP_SUFFIX
3207     _RDN=`${ECHO} "${LDAP_SUFFIX}" | cut -d, -f1`
3208     _ATT=`${ECHO} "${_RDN}" | cut -d= -f1`
3209     _VAL=`${ECHO} "${_RDN}" | cut -d= -f2-`
3210
3211     # find out an objectclass for suffix entry if it is not defined yet
3212     [ -z "${LDAP_SUFFIX_OBJ}" ] &&
3213     {
3214         get_objectclass ${_ATT}
3215         [ -z "${_ATTR_NAME}" ] &&
3216         {
3217                 display_msg obj_not_found
3218                 return 1
3219         }
3220         LDAP_SUFFIX_OBJ=${_ATTR_NAME}
3221     }
3222     [ $DEBUG -eq 1 ] && ${ECHO} "Suffix entry object is ${LDAP_SUFFIX_OBJ}"
3223
3224     # find out an aci for suffix entry if it is not defined yet
3225     [ -z "${LDAP_SUFFIX_ACI}" ] &&
3226     {
3227         # set Directory Server default aci
3228         LDAP_SUFFIX_ACI=`cat <<EOF
3229 aci: (targetattr != "userPassword || passwordHistory || passwordExpirationTime
3230  || passwordExpWarned || passwordRetryCount || retryCountResetTime ||
3231  accountUnlockTime || passwordAllowChangeTime")
3232  (
3233    version 3.0;
3234    acl "Anonymous access";
3235    allow (read, search, compare) userdn = "ldap:///anyone";
3236  )
3237 aci: (targetattr != "nsroledn || aci || nsLookThroughLimit || nsSizeLimit ||
3238  nsTimeLimit || nsIdleTimeout || passwordPolicySubentry ||
3239  passwordExpirationTime || passwordExpWarned || passwordRetryCount ||
3240  retryCountResetTime || accountUnlockTime || passwordHistory ||
3241  passwordAllowChangeTime")
3242  (
3243    version 3.0;
3244    acl "Allow self entry modification except for some attributes";
3245    allow (write) userdn = "ldap:///self";
3246  )
3247 aci: (targetattr = "*")
3248  (
3249    version 3.0;
3250    acl "Configuration Administrator";
3251    allow (all) userdn = "ldap:///uid=admin,ou=Administrators,
3252                          ou=TopologyManagement,o=NetscapeRoot";
3253  )
3254 aci: (targetattr ="*")
3255  (
3256    version 3.0;
3257    acl "Configuration Administrators Group";
3258    allow (all) groupdn = "ldap:///cn=Configuration Administrators,
3259                           ou=Groups,ou=TopologyManagement,o=NetscapeRoot";
3260  )
3261 EOF
3262 `
3263     }
3264     [ $DEBUG -eq 1 ] && cat <<EOF
3265 DEBUG: ACI for ${LDAP_SUFFIX} is
3266 ${LDAP_SUFFIX_ACI}
3267 EOF
3268
3269     NEED_CREATE_BACKEND=
3270
3271     # check the suffix mapping tree ...
3272     # if mapping exists, suffix should work, otherwise DS inconsistent
3273     # NOTE: -b 'cn=mapping tree,cn=config' -s one 'cn=\"$1\"' won't work
3274     #       in case of 'cn' value in LDAP is not quoted by '"',
3275     #       -b 'cn=\"$1\",cn=mapping tree,cn=config' works in all cases
3276     ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} \
3277         -b 'cn=\"${LDAP_SUFFIX}\",cn=mapping tree,cn=config' \
3278         -s base 'objectclass=*' dn ${VERB}" &&
3279     {
3280         [ $DEBUG -eq 1 ] && ${ECHO} "Suffix mapping already exists"
3281         # get_backend() either gets IDS_DATABASE or exits
3282         get_backend
3283         return 0
3284     }
3285
3286     # no suffix mapping, just in case check ldbm backends consistency -
3287     # there are must be NO any databases pointing to LDAP_SUFFIX
3288     [ -n "`${EVAL} \"${LDAPSEARCH} ${LDAP_ARGS} \
3289         -b 'cn=ldbm database,cn=plugins,cn=config' \
3290         -s one 'nsslapd-suffix=${LDAP_SUFFIX}' dn\" 2>/dev/null`" ] &&
3291     {
3292         display_msg sfx_config_incons
3293         return 1
3294     }
3295
3296     # ok, no suffix mapping, no ldbm database
3297     [ $DEBUG -eq 1 ] && ${ECHO} "DEBUG: backend needs to be created ..."
3298     NEED_CREATE_BACKEND=1
3299     return 0
3300 }
3301
3302 #
3303 # prepare for the suffix backend creation
3304 #
3305 # input  : IDS_DATABASE - requested ldbm db name (must be not null)
3306 # in/out : IDS_DATABASE_AVAIL - available ldbm db name
3307 # return : 0 - ldbm db name ok
3308 #          1 - IDS_DATABASE exists,
3309 #              so IDS_DATABASE_AVAIL contains available name
3310 #          2 - unable to find any available name
3311 #
3312 prep_create_sfx_backend()
3313 {
3314     [ $DEBUG -eq 1 ] && ${ECHO} "In prep_create_sfx_backend()"
3315
3316     # check if requested name available
3317     [ "${IDS_DATABASE}" = "${IDS_DATABASE_AVAIL}" ] && return 0
3318
3319     # get the list of database names start with a requested name
3320     _LDBM_DBS=`${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} \
3321         -b 'cn=ldbm database,cn=plugins,cn=config' \
3322         -s one 'cn=${IDS_DATABASE}*' cn"` 2>/dev/null
3323
3324     # find available db name based on a requested name
3325     _i=""; _i_MAX=10
3326     while [ ${_i:-0} -lt ${_i_MAX} ]
3327     do
3328         _name="${IDS_DATABASE}${_i}"
3329         ${ECHO} "${_LDBM_DBS}" | ${GREP} -i "^cn=${_name}$" >/dev/null 2>&1 ||
3330         {
3331                 IDS_DATABASE_AVAIL="${_name}"
3332                 break
3333         }
3334         _i=`expr ${_i:-0} + 1`
3335     done
3336
3337     [ "${IDS_DATABASE}" = "${IDS_DATABASE_AVAIL}" ] && return 0
3338
3339     [ -n "${IDS_DATABASE_AVAIL}" ] &&
3340     {
3341         display_msg ldbm_db_exist
3342         return 1
3343     }
3344
3345     display_msg unable_find_db_name
3346     return 2
3347 }
3348
3349 #
3350 # add suffix if needed,
3351 #     suffix entry and backend MUST be prepared by
3352 #     prep_create_sfx_entry and prep_create_sfx_backend correspondingly
3353 #
3354 # input  : NEED_CREATE_SUFFIX, LDAP_SUFFIX, LDAP_SUFFIX_OBJ, _ATT, _VAL
3355 #          LDAP_SUFFIX_ACI, NEED_CREATE_BACKEND, IDS_DATABASE
3356 # return : 0 - suffix successfully created, otherwise error occured
3357 #
3358 add_suffix()
3359 {
3360     [ $DEBUG -eq 1 ] && ${ECHO} "In add_suffix()"
3361
3362     [ -n "${NEED_CREATE_SUFFIX}" ] || return 0
3363
3364     [ -n "${NEED_CREATE_BACKEND}" ] &&
3365     {
3366         ${EVAL} "${LDAPADD} ${LDAP_ARGS} ${VERB}" <<EOF
3367 dn: cn="${LDAP_SUFFIX}",cn=mapping tree,cn=config
3368 objectclass: top
3369 objectclass: extensibleObject
3370 objectclass: nsMappingTree
3371 cn: ${LDAP_SUFFIX}
3372 nsslapd-state: backend
3373 nsslapd-backend: ${IDS_DATABASE}
3374
3375 dn: cn=${IDS_DATABASE},cn=ldbm database,cn=plugins,cn=config
3376 objectclass: top
3377 objectclass: extensibleObject
3378 objectclass: nsBackendInstance
3379 cn: ${IDS_DATABASE}
3380 nsslapd-suffix: ${LDAP_SUFFIX}
3381 EOF
3382         [ $? -ne 0 ] &&
3383         {
3384                 display_msg create_ldbm_db_error
3385                 return 1
3386         }
3387
3388         ${ECHO} "  ${STEP}. Database ${IDS_DATABASE} successfully created"
3389         STEP=`expr $STEP + 1`
3390     }
3391
3392     ${EVAL} "${LDAPADD} ${LDAP_ARGS} ${VERB}" <<EOF
3393 dn: ${LDAP_SUFFIX}
3394 objectclass: ${LDAP_SUFFIX_OBJ}
3395 ${_ATT}: ${_VAL}
3396 ${LDAP_SUFFIX_ACI}
3397 EOF
3398     [ $? -ne 0 ] &&
3399     {
3400         display_msg create_suffix_entry_error
3401         return 1
3402     }
3403
3404     ${ECHO} "  ${STEP}. Suffix ${LDAP_SUFFIX} successfully created"
3405     STEP=`expr $STEP + 1`
3406     return 0
3407 }
3408
3409 #
3410 # interactively get suffix and related info from a user
3411 #
3412 # input  : LDAP_BASEDN - Base DN
3413 # output : LDAP_SUFFIX - Suffix, _ATT, _VAL - id attribute and its value;
3414 #          LDAP_SUFFIX_OBJ, LDAP_SUFFIX_ACI - objectclass and aci;
3415 #          NEED_CREATE_BACKEND - tells whether backend needs to be created;
3416 #          IDS_DATABASE - prepared ldbm db name
3417 # return : 0 - user gave a correct suffix
3418 #          1 - suffix given by user cann't be created
3419 #
3420 get_suffix()
3421 {
3422     [ $DEBUG -eq 1 ] && ${ECHO} "In get_suffix()"
3423
3424     while :
3425     do
3426         get_ans "Enter suffix to be created (b=back/h=help):" ${LDAP_BASEDN}
3427         case "${ANS}" in
3428         [Hh] | Help | help | \? ) display_msg create_suffix_help ;;
3429         [Bb] | Back | back | \< ) return 1 ;;
3430         * )
3431                 format_string "${ANS}"
3432                 LDAP_SUFFIX=${FMT_STR}
3433                 prep_create_sfx_entry || continue
3434
3435                 [ -n "${NEED_CREATE_BACKEND}" ] &&
3436                 {
3437                     IDS_DATABASE_AVAIL= # reset the available db name
3438
3439                     reenter_suffix=
3440                     while :
3441                     do
3442                         get_ans "Enter ldbm database name (b=back/h=help):" \
3443                                 ${IDS_DATABASE_AVAIL:-${_VAL}}
3444                         case "${ANS}" in
3445                         [Hh] | \? ) display_msg enter_ldbm_db_help ;;
3446                         [Bb] | \< ) reenter_suffix=1; break ;;
3447                         * )
3448                                 IDS_DATABASE="${ANS}"
3449                                 prep_create_sfx_backend && break
3450                         esac
3451                     done
3452                     [ -n "${reenter_suffix}" ] && continue
3453
3454                     [ $DEBUG -eq 1 ] && cat <<EOF
3455 DEBUG: backend name for suffix ${LDAP_SUFFIX} will be ${IDS_DATABASE}
3456 EOF
3457                 }
3458
3459                 # eventually everything is prepared
3460                 return 0
3461                 ;;
3462         esac
3463     done
3464 }
3465
3466 #
3467 # print out a script which sets LDAP suffix related preferences
3468 #
3469 print_suffix_config()
3470 {
3471     cat <<EOF2
3472 # LDAP suffix related preferences used only if needed
3473 IDS_DATABASE="${IDS_DATABASE}"
3474 LDAP_SUFFIX_OBJ="$LDAP_SUFFIX_OBJ"
3475 LDAP_SUFFIX_ACI=\`cat <<EOF
3476 ${LDAP_SUFFIX_ACI}
3477 EOF
3478 \`
3479 export IDS_DATABASE LDAP_SUFFIX_OBJ LDAP_SUFFIX_ACI
3480 EOF2
3481 }
3482
3483 #
3484 # check_basedn_suffix(): check that there is an existing
3485 # valid suffix to hold current base DN
3486 # return:
3487 #   0: valid suffix found or new one should be created,
3488 #      NEED_CREATE_SUFFIX flag actually indicates that
3489 #   1: some error occures
3490 #
3491 check_basedn_suffix()
3492 {
3493     [ $DEBUG -eq 1 ] && ${ECHO} "In check_basedn_suffix()"
3494
3495     NEED_CREATE_SUFFIX=
3496
3497     # find out existing suffixes
3498     discover_serv_suffix
3499
3500     ${ECHO} "  Validating LDAP Base DN and Suffix ..."
3501
3502     # check that LDAP Base DN might be added
3503     cur_ldap_entry=${LDAP_BASEDN}
3504     prev_ldap_entry=
3505     while [ "${cur_ldap_entry}" != "${prev_ldap_entry}" ]
3506     do
3507         [ $DEBUG -eq 1 ] && ${ECHO} "testing LDAP entry: ${cur_ldap_entry}"
3508         ${LDAPSEARCH} ${SERVER_ARGS} -b "${cur_ldap_entry}" \
3509                 -s one "objectclass=*" > /dev/null 2>&1
3510         if [ $? -eq 0 ]; then
3511             break
3512         else
3513             prev_ldap_entry=${cur_ldap_entry}
3514             cur_ldap_entry=`${ECHO} ${cur_ldap_entry} | cut -f2- -d','`
3515         fi
3516     done
3517
3518     if [ "${cur_ldap_entry}" = "${prev_ldap_entry}" ]; then
3519         ${ECHO} "  No valid suffixes were found for Base DN ${LDAP_BASEDN}"
3520
3521         NEED_CREATE_SUFFIX=1
3522         return 0
3523
3524     else
3525         [ $DEBUG -eq 1 ] && ${ECHO} "found valid LDAP entry: ${cur_ldap_entry}"
3526
3527         # Now looking for relevant suffix for this entry.
3528         # LDAP_SUFFIX will then be used to add necessary
3529         # base objects. See add_base_objects().
3530         format_string "${cur_ldap_entry}"
3531         lower_entry="${FMT_STR}"
3532         [ $DEBUG -eq 1 ] && ${ECHO} "final suffix list: ${LDAP_SUFFIX_LIST}"
3533         oIFS=$IFS
3534         [ $DEBUG -eq 1 ] && ${ECHO} "setting IFS to new line"
3535         IFS='
3536 '
3537         for suff in ${LDAP_SUFFIX_LIST}
3538         do
3539             [ $DEBUG -eq 1 ] && ${ECHO} "testing suffix: ${suff}"
3540             format_string "${suff}"
3541             lower_suff="${FMT_STR}"
3542             if [ "${lower_entry}" = "${lower_suff}" ]; then
3543                 LDAP_SUFFIX="${suff}"
3544                 break
3545             else
3546                 dcstmp=`basename "${lower_entry}" "${lower_suff}"`
3547                 if [ "${dcstmp}" = "${lower_entry}" ]; then
3548                     # invalid suffix, try next one
3549                     continue
3550                 else
3551                     # valid suffix found
3552                     LDAP_SUFFIX="${suff}"
3553                     break
3554                 fi
3555             fi
3556         done
3557         [ $DEBUG -eq 1 ] && ${ECHO} "setting IFS to original value"
3558         IFS=$oIFS
3559
3560         [ $DEBUG -eq 1 ] && ${ECHO} "LDAP_SUFFIX: ${LDAP_SUFFIX}"
3561
3562         if [ -z "${LDAP_SUFFIX}" ]; then
3563             # should not happen, since we found the entry
3564             ${ECHO} "Could not find a valid suffix for ${LDAP_BASEDN}."
3565             ${ECHO} "Exiting."
3566             return 1
3567         fi
3568
3569         # Getting relevant database (backend)
3570         # IDS_DATABASE will then be used to create indexes.
3571         get_backend
3572
3573         return 0
3574     fi
3575 }
3576
3577 #
3578 # discover_serv_suffix(): This function queries the server to find
3579 #    suffixes available
3580 #  return: 0: OK, suffix found
3581 #          1: suffix not determined
3582 discover_serv_suffix()
3583 {
3584     [ $DEBUG -eq 1 ] && ${ECHO} "In discover_serv_suffix()"
3585
3586     # Search the server for the TOP of the TREE.
3587     ${LDAPSEARCH} ${SERVER_ARGS} -b "" -s base "objectclass=*" > ${TMPDIR}/checkTOP 2>&1
3588     ${GREP} -i namingcontexts ${TMPDIR}/checkTOP | \
3589         ${GREP} -i -v NetscapeRoot > ${TMPDIR}/treeTOP
3590     NUM_TOP=`wc -l ${TMPDIR}/treeTOP | awk '{print $1}'`
3591     case $NUM_TOP in
3592         0)
3593             [ $DEBUG -eq 1 ] && ${ECHO} "DEBUG: No suffix found in LDAP tree"
3594             return 1
3595             ;;
3596         *)  # build the list of suffixes; take out 'namingContexts=' in
3597             # each line of ${TMPDIR}/treeTOP
3598             LDAP_SUFFIX_LIST=`cat ${TMPDIR}/treeTOP |
3599                 awk '{ printf("%s\n",substr($0,16,length-15)) }'`
3600             ;;
3601     esac
3602
3603     [ $DEBUG -eq 1 ] && ${ECHO} "  LDAP_SUFFIX_LIST = $LDAP_SUFFIX_LIST"
3604     return 0
3605 }
3606
3607
3608 #
3609 # modify_cn(): Change the cn from MUST to MAY in ipNetwork.
3610 #
3611 modify_cn()
3612 {
3613     [ $DEBUG -eq 1 ] && ${ECHO} "In modify_cn()"
3614
3615     ( cat <<EOF
3616 dn: cn=schema
3617 changetype: modify
3618 add: objectclasses
3619 objectclasses: ( 1.3.6.1.1.1.2.7 NAME 'ipNetwork' DESC 'Standard LDAP objectclass' SUP top STRUCTURAL MUST ipNetworkNumber MAY ( ipNetmaskNumber $ manager $ cn $ l $ description ) X-ORIGIN 'RFC 2307' )
3620 EOF
3621 ) > ${TMPDIR}/ipNetwork_cn
3622
3623     # Modify the cn for ipNetwork.
3624     ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/ipNetwork_cn ${VERB}"
3625     if [ $? -ne 0 ]; then
3626         ${ECHO} "  ERROR: update of cn for ipNetwork failed!"
3627         cleanup
3628         exit 1
3629     fi
3630 }
3631
3632
3633 # modify_timelimit(): Modify timelimit to user value.
3634 modify_timelimit()
3635 {
3636     [ $DEBUG -eq 1 ] && ${ECHO} "In modify_timelimit()"
3637
3638     # Here doc to modify timelimit.
3639     ( cat <<EOF
3640 dn: cn=config
3641 changetype: modify
3642 replace: nsslapd-timelimit
3643 nsslapd-timelimit: ${IDS_TIMELIMIT}
3644 EOF
3645 ) > ${TMPDIR}/ids_timelimit
3646
3647     # Add the entry.
3648     ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/ids_timelimit ${VERB}"
3649     if [ $? -ne 0 ]; then
3650         ${ECHO} "  ERROR: update of nsslapd-timelimit failed!"
3651         cleanup
3652         exit 1
3653     fi
3654
3655     # Display messages for modifications made in patch.
3656     ${ECHO} "  ${STEP}. Changed timelimit to ${IDS_TIMELIMIT} in cn=config."
3657     STEP=`expr $STEP + 1`
3658 }
3659
3660
3661 # modify_sizelimit(): Modify sizelimit to user value.
3662 modify_sizelimit()
3663 {
3664     [ $DEBUG -eq 1 ] && ${ECHO} "In modify_sizelimit()"
3665
3666     # Here doc to modify sizelimit.
3667     ( cat <<EOF
3668 dn: cn=config
3669 changetype: modify
3670 replace: nsslapd-sizelimit
3671 nsslapd-sizelimit: ${IDS_SIZELIMIT}
3672 EOF
3673 ) > ${TMPDIR}/ids_sizelimit
3674
3675     # Add the entry.
3676     ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/ids_sizelimit ${VERB}"
3677     if [ $? -ne 0 ]; then
3678         ${ECHO} "  ERROR: update of nsslapd-sizelimit failed!"
3679         cleanup
3680         exit 1
3681     fi
3682
3683     # Display messages for modifications made in patch.
3684     ${ECHO} "  ${STEP}. Changed sizelimit to ${IDS_SIZELIMIT} in cn=config."
3685     STEP=`expr $STEP + 1`
3686 }
3687
3688
3689 # modify_pwd_crypt(): Modify the passwd storage scheme to support CRYPT.
3690 modify_pwd_crypt()
3691 {
3692     [ $DEBUG -eq 1 ] && ${ECHO} "In modify_pwd_crypt()"
3693
3694     # Here doc to modify passwordstoragescheme.
3695     # IDS 5.2 moved passwordchangesceme off to a new data structure.
3696     if [ $IDS_MAJVER -le 5 ] && [ $IDS_MINVER -le 1 ]; then
3697         ( cat <<EOF
3698 dn: cn=config
3699 changetype: modify
3700 replace: passwordstoragescheme
3701 passwordstoragescheme: crypt
3702 EOF
3703         ) > ${TMPDIR}/ids_crypt
3704     else
3705         ( cat <<EOF
3706 dn: cn=Password Policy,cn=config
3707 changetype: modify
3708 replace: passwordstoragescheme
3709 passwordstoragescheme: crypt
3710 EOF
3711         ) > ${TMPDIR}/ids_crypt
3712     fi
3713
3714     # Add the entry.
3715     ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/ids_crypt ${VERB}"
3716     if [ $? -ne 0 ]; then
3717         ${ECHO} "  ERROR: update of passwordstoragescheme failed!"
3718         cleanup
3719         exit 1
3720     fi
3721
3722     # Display messages for modifications made in patch.
3723     ${ECHO} "  ${STEP}. Changed passwordstoragescheme to \"crypt\" in cn=config."
3724     STEP=`expr $STEP + 1`
3725 }
3726
3727
3728 #
3729 # add_eq_indexes(): Add indexes to improve search performance.
3730 #
3731 add_eq_indexes()
3732 {
3733     [ $DEBUG -eq 1 ] && ${ECHO} "In add_eq_indexes()"
3734
3735     # Set eq indexes to add.
3736     _INDEXES="uidNumber ipNetworkNumber gidnumber oncrpcnumber automountKey"
3737
3738     if [ -z "${IDS_DATABASE}" ]; then
3739         get_backend
3740     fi
3741
3742     # Set _EXT to use as shortcut.
3743     _EXT="cn=index,cn=${IDS_DATABASE},cn=ldbm database,cn=plugins,cn=config"
3744
3745     # Display message to id current step.
3746     ${ECHO} "  ${STEP}. Processing eq,pres indexes:"
3747     STEP=`expr $STEP + 1`
3748
3749     # For loop to create indexes.
3750     for i in ${_INDEXES}; do
3751         [ $DEBUG -eq 1 ] && ${ECHO} "  Adding index for ${i}"
3752
3753         # Check if entry exists first, if so, skip to next.
3754         ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${i},${_EXT}\" -s base \
3755             \"objectclass=*\" > /dev/null 2>&1"
3756         if [ $? -eq 0 ]; then
3757             # Display index skipped.
3758             ${ECHO} "      ${i} (eq,pres) skipped already exists"
3759             continue
3760         fi
3761
3762         # Here doc to create LDIF.
3763         ( cat <<EOF
3764 dn: cn=${i},${_EXT}
3765 objectClass: top
3766 objectClass: nsIndex
3767 cn: ${i}
3768 nsSystemIndex: false
3769 nsIndexType: pres
3770 nsIndexType: eq
3771 EOF
3772 ) > ${TMPDIR}/index_${i}
3773
3774         # Add the index.
3775         ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/index_${i} ${VERB}"
3776         if [ $? -ne 0 ]; then
3777             ${ECHO} "  ERROR: Adding EQ,PRES index for ${i} failed!"
3778             cleanup
3779             exit 1
3780         fi
3781
3782         # Build date for task name.
3783         _YR=`date '+%y'`
3784         _MN=`date '+%m'`
3785         _DY=`date '+%d'`
3786         _H=`date '+%H'`
3787         _M=`date '+%M'`
3788         _S=`date '+%S'`
3789
3790         # Build task name
3791         TASKNAME="${i}_${_YR}_${_MN}_${_DY}_${_H}_${_M}_${_S}"
3792
3793         # Build the task entry to add.
3794         ( cat <<EOF
3795 dn: cn=${TASKNAME}, cn=index, cn=tasks, cn=config
3796 changetype: add
3797 objectclass: top
3798 objectclass: extensibleObject
3799 cn: ${TASKNAME}
3800 nsInstance: ${IDS_DATABASE}
3801 nsIndexAttribute: ${i}
3802 EOF
3803 ) > ${TMPDIR}/task_${i}
3804
3805         # Add the task.
3806         ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/task_${i} ${VERB}"
3807         if [ $? -ne 0 ]; then
3808             ${ECHO} "  ERROR: Adding task for ${i} failed!"
3809             cleanup
3810             exit 1
3811         fi
3812
3813         # Wait for task to finish, display current status.
3814         while :
3815         do
3816             ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} \
3817                 -b \"cn=${TASKNAME}, cn=index, cn=tasks, cn=config\" -s base \
3818                 \"objectclass=*\" nstaskstatus > \"${TMPDIR}/istask_${i}\" 2>&1"
3819             ${GREP} "${TASKNAME}" "${TMPDIR}/istask_${i}" > /dev/null 2>&1
3820             if [ $? -ne 0 ]; then
3821                 break
3822             fi
3823             TASK_STATUS=`${GREP} -i nstaskstatus "${TMPDIR}/istask_${i}" |
3824                 head -1 | cut -d: -f2`
3825             ${ECHO} "      ${i} (eq,pres)  $TASK_STATUS                  \r\c"
3826             ${ECHO} "$TASK_STATUS" | ${GREP} "Finished" > /dev/null 2>&1
3827             if [ $? -eq 0 ]; then
3828                 break
3829             fi
3830             sleep 2
3831         done
3832
3833         # Print newline because of \c.
3834         ${ECHO} " "
3835     done
3836 }
3837
3838
3839 #
3840 # add_sub_indexes(): Add indexes to improve search performance.
3841 #
3842 add_sub_indexes()
3843 {
3844     [ $DEBUG -eq 1 ] && ${ECHO} "In add_sub_indexes()"
3845
3846     # Set eq indexes to add.
3847     _INDEXES="ipHostNumber membernisnetgroup nisnetgrouptriple"
3848
3849     # Set _EXT to use as shortcut.
3850     _EXT="cn=index,cn=${IDS_DATABASE},cn=ldbm database,cn=plugins,cn=config"
3851
3852
3853     # Display message to id current step.
3854     ${ECHO} "  ${STEP}. Processing eq,pres,sub indexes:"
3855     STEP=`expr $STEP + 1`
3856
3857     # For loop to create indexes.
3858     for i in ${_INDEXES}; do
3859         [ $DEBUG -eq 1 ] && ${ECHO} "  Adding index for ${i}"
3860
3861         # Check if entry exists first, if so, skip to next.
3862         ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${i},${_EXT}\" \
3863             -s base \"objectclass=*\" > /dev/null 2>&1"
3864         if [ $? -eq 0 ]; then
3865             # Display index skipped.
3866             ${ECHO} "      ${i} (eq,pres,sub) skipped already exists"
3867             continue
3868         fi
3869
3870         # Here doc to create LDIF.
3871         ( cat <<EOF
3872 dn: cn=${i},${_EXT}
3873 objectClass: top
3874 objectClass: nsIndex
3875 cn: ${i}
3876 nsSystemIndex: false
3877 nsIndexType: pres
3878 nsIndexType: eq
3879 nsIndexType: sub
3880 EOF
3881 ) > ${TMPDIR}/index_${i}
3882
3883         # Add the index.
3884         ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/index_${i} ${VERB}"
3885         if [ $? -ne 0 ]; then
3886             ${ECHO} "  ERROR: Adding EQ,PRES,SUB index for ${i} failed!"
3887             cleanup
3888             exit 1
3889         fi
3890
3891         # Build date for task name.
3892         _YR=`date '+%y'`
3893         _MN=`date '+%m'`
3894         _DY=`date '+%d'`
3895         _H=`date '+%H'`
3896         _M=`date '+%M'`
3897         _S=`date '+%S'`
3898
3899         # Build task name
3900         TASKNAME="${i}_${_YR}_${_MN}_${_DY}_${_H}_${_M}_${_S}"
3901
3902         # Build the task entry to add.
3903         ( cat <<EOF
3904 dn: cn=${TASKNAME}, cn=index, cn=tasks, cn=config
3905 changetype: add
3906 objectclass: top
3907 objectclass: extensibleObject
3908 cn: ${TASKNAME}
3909 nsInstance: ${IDS_DATABASE}
3910 nsIndexAttribute: ${i}
3911 EOF
3912 ) > ${TMPDIR}/task_${i}
3913
3914         # Add the task.
3915         ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/task_${i} ${VERB}"
3916         if [ $? -ne 0 ]; then
3917             ${ECHO} "  ERROR: Adding task for ${i} failed!"
3918             cleanup
3919             exit 1
3920         fi
3921
3922         # Wait for task to finish, display current status.
3923         while :
3924         do
3925             ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} \
3926                 -b \"cn=${TASKNAME}, cn=index, cn=tasks, cn=config\" -s base \
3927                 \"objectclass=*\" nstaskstatus > \"${TMPDIR}/istask_${i}\" 2>&1"
3928             ${GREP} "${TASKNAME}" "${TMPDIR}/istask_${i}" > /dev/null 2>&1
3929             if [ $? -ne 0 ]; then
3930                 break
3931             fi
3932             TASK_STATUS=`${GREP} -i nstaskstatus "${TMPDIR}/istask_${i}" |
3933                 head -1 | cut -d: -f2`
3934             ${ECHO} "      ${i} (eq,pres,sub)  $TASK_STATUS                  \r\c"
3935             ${ECHO} "$TASK_STATUS" | ${GREP} "Finished" > /dev/null 2>&1
3936             if [ $? -eq 0 ]; then
3937                 break
3938             fi
3939             sleep 2
3940         done
3941
3942         # Print newline because of \c.
3943         ${ECHO} " "
3944     done
3945 }
3946
3947
3948 #
3949 # add_vlv_indexes(): Add VLV indexes to improve search performance.
3950 #
3951 add_vlv_indexes()
3952 {
3953     [ $DEBUG -eq 1 ] && ${ECHO} "In add_vlv_indexes()"
3954
3955     # Set eq indexes to add.
3956     # Note semi colon separators because some filters contain colons
3957     _INDEX1="${LDAP_DOMAIN}.getgrent;${LDAP_DOMAIN}_group_vlv_index;ou=group;objectClass=posixGroup"
3958     _INDEX2="${LDAP_DOMAIN}.gethostent;${LDAP_DOMAIN}_hosts_vlv_index;ou=hosts;objectClass=ipHost"
3959     _INDEX3="${LDAP_DOMAIN}.getnetent;${LDAP_DOMAIN}_networks_vlv_index;ou=networks;objectClass=ipNetwork"
3960     _INDEX4="${LDAP_DOMAIN}.getpwent;${LDAP_DOMAIN}_passwd_vlv_index;ou=people;objectClass=posixAccount"
3961     _INDEX5="${LDAP_DOMAIN}.getrpcent;${LDAP_DOMAIN}_rpc_vlv_index;ou=rpc;objectClass=oncRpc"
3962     _INDEX6="${LDAP_DOMAIN}.getspent;${LDAP_DOMAIN}_shadow_vlv_index;ou=people;objectClass=shadowAccount"
3963
3964     # Indexes added during NIS to LDAP transition
3965     _INDEX7="${LDAP_DOMAIN}.getauhoent;${LDAP_DOMAIN}_auho_vlv_index;automountmapname=auto_home;objectClass=automount"
3966     _INDEX8="${LDAP_DOMAIN}.getsoluent;${LDAP_DOMAIN}_solu_vlv_index;ou=people;objectClass=SolarisUserAttr"
3967     _INDEX10="${LDAP_DOMAIN}.getauthent;${LDAP_DOMAIN}_auth_vlv_index;ou=SolarisAuthAttr;objectClass=SolarisAuthAttr"
3968     _INDEX11="${LDAP_DOMAIN}.getexecent;${LDAP_DOMAIN}_exec_vlv_index;ou=SolarisProfAttr;&(objectClass=SolarisExecAttr)(SolarisKernelSecurityPolicy=*)"
3969     _INDEX12="${LDAP_DOMAIN}.getprofent;${LDAP_DOMAIN}_prof_vlv_index;ou=SolarisProfAttr;&(objectClass=SolarisProfAttr)(SolarisAttrLongDesc=*)"
3970     _INDEX13="${LDAP_DOMAIN}.getmailent;${LDAP_DOMAIN}_mail_vlv_index;ou=aliases;objectClass=mailGroup"
3971     _INDEX14="${LDAP_DOMAIN}.getbootent;${LDAP_DOMAIN}__boot_vlv_index;ou=ethers;&(objectClass=bootableDevice)(bootParameter=*)"
3972     _INDEX15="${LDAP_DOMAIN}.getethent;${LDAP_DOMAIN}_ethers_vlv_index;ou=ethers;&(objectClass=ieee802Device)(macAddress=*)"
3973     _INDEX16="${LDAP_DOMAIN}.getngrpent;${LDAP_DOMAIN}_netgroup_vlv_index;ou=netgroup;objectClass=nisNetgroup"
3974     _INDEX17="${LDAP_DOMAIN}.getipnent;${LDAP_DOMAIN}_ipn_vlv_index;ou=networks;&(objectClass=ipNetwork)(cn=*)"
3975     _INDEX18="${LDAP_DOMAIN}.getmaskent;${LDAP_DOMAIN}_mask_vlv_index;ou=networks;&(objectClass=ipNetwork)(ipNetmaskNumber=*)"
3976     _INDEX19="${LDAP_DOMAIN}.getprent;${LDAP_DOMAIN}_pr_vlv_index;ou=printers;objectClass=printerService"
3977     _INDEX20="${LDAP_DOMAIN}.getip4ent;${LDAP_DOMAIN}_ip4_vlv_index;ou=hosts;&(objectClass=ipHost)(ipHostNumber=*.*)"
3978     _INDEX21="${LDAP_DOMAIN}.getip6ent;${LDAP_DOMAIN}_ip6_vlv_index;ou=hosts;&(objectClass=ipHost)(ipHostNumber=*:*)"
3979
3980     _INDEXES="$_INDEX1 $_INDEX2 $_INDEX3 $_INDEX4 $_INDEX5 $_INDEX6 $_INDEX7 $_INDEX8 $_INDEX9 $_INDEX10 $_INDEX11 $_INDEX12 $_INDEX13 $_INDEX14 $_INDEX15 $_INDEX16 $_INDEX17 $_INDEX18 $_INDEX19 $_INDEX20 $_INDEX21 "
3981
3982
3983     # Set _EXT to use as shortcut.
3984     _EXT="cn=${IDS_DATABASE},cn=ldbm database,cn=plugins,cn=config"
3985
3986
3987     # Display message to id current step.
3988     ${ECHO} "  ${STEP}. Processing VLV indexes:"
3989     STEP=`expr $STEP + 1`
3990
3991     # Reset temp file for vlvindex commands.
3992     [ -f ${TMPDIR}/ds5_vlvindex_list ] &&  rm ${TMPDIR}/ds5_vlvindex_list
3993     touch ${TMPDIR}/ds5_vlvindex_list
3994     [ -f ${TMPDIR}/ds6_vlvindex_list ] &&  rm ${TMPDIR}/ds6_vlvindex_list
3995     touch ${TMPDIR}/ds6_vlvindex_list
3996
3997     # Get the instance name from iDS server.
3998     _INSTANCE="<server-instance>"    # Default to old output.
3999
4000     eval "${LDAPSEARCH} -v ${LDAP_ARGS} -b \"cn=config\" -s base \"objectclass=*\" nsslapd-instancedir | ${GREP} 'nsslapd-instancedir=' | cut -d'=' -f2- > ${TMPDIR}/instance_name 2>&1"
4001
4002     ${GREP} "slapd-" ${TMPDIR}/instance_name > /dev/null 2>&1 # Check if seems right?
4003     if [ $? -eq 0 ]; then # If success, grab name after "slapd-".
4004         _INST_DIR=`cat ${TMPDIR}/instance_name`
4005         _INSTANCE=`basename "${_INST_DIR}" | cut -d'-' -f2-`
4006     fi
4007
4008     # For loop to create indexes.
4009     for p in ${_INDEXES}; do
4010         [ $DEBUG -eq 1 ] && ${ECHO} "  Adding index for ${i}"
4011
4012         # Break p (pair) into i and j parts.
4013         i=`${ECHO} $p | cut -d';' -f1`
4014         j=`${ECHO} $p | cut -d';' -f2`
4015         k=`${ECHO} $p | cut -d';' -f3`
4016         m=`${ECHO} $p | cut -d';' -f4`
4017
4018         # Set _jEXT to use as shortcut.
4019         _jEXT="cn=${j},${_EXT}"
4020
4021         # Check if entry exists first, if so, skip to next.
4022         ${LDAPSEARCH} ${SERVER_ARGS} -b "cn=${i},${_jEXT}" -s base "objectclass=*" > /dev/null 2>&1
4023         if [ $? -eq 0 ]; then
4024             # Display index skipped.
4025             ${ECHO} "      ${i} vlv_index skipped already exists"
4026             continue
4027         fi
4028
4029         # Compute the VLV Scope from the LDAP_SEARCH_SCOPE.
4030         # NOTE: A value of "base (0)" does not make sense.
4031         case "$LDAP_SEARCH_SCOPE" in
4032             sub) VLV_SCOPE="2" ;;
4033             *)   VLV_SCOPE="1" ;;
4034         esac
4035
4036         # Here doc to create LDIF.
4037         ( cat <<EOF
4038 dn: ${_jEXT}
4039 objectClass: top
4040 objectClass: vlvSearch
4041 cn: ${j}
4042 vlvbase: ${k},${LDAP_BASEDN}
4043 vlvscope: ${VLV_SCOPE}
4044 vlvfilter: (${m})
4045 aci: (target="ldap:///${_jEXT}")(targetattr="*")(version 3.0; acl "Config";allow(read,search,compare)userdn="ldap:///anyone";)
4046
4047 dn: cn=${i},${_jEXT}
4048 cn: ${i}
4049 vlvSort: cn uid
4050 objectclass: top
4051 objectclass: vlvIndex
4052 EOF
4053 ) > ${TMPDIR}/vlv_index_${i}
4054
4055         # Add the index.
4056         ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/vlv_index_${i} ${VERB}"
4057         if [ $? -ne 0 ]; then
4058             ${ECHO} "  ERROR: Adding VLV index for ${i} failed!"
4059             cleanup
4060             exit 1
4061         fi
4062
4063         # Print message that index was created.
4064         ${ECHO} "      ${i} vlv_index   Entry created"
4065
4066         # Add command to list of vlvindex commands to run.
4067         ${ECHO} "  directoryserver -s ${_INSTANCE} vlvindex -n ${IDS_DATABASE} -T ${i}" >> ${TMPDIR}/ds5_vlvindex_list
4068         ${ECHO} "  <install-path>/bin/dsadm reindex -l -t ${i} <directory-instance-path> ${LDAP_SUFFIX}" >> ${TMPDIR}/ds6_vlvindex_list
4069     done
4070 }
4071
4072
4073 #
4074 # display_vlv_cmds(): Display VLV index commands to run on server.
4075 #
4076 display_vlv_cmds()
4077 {
4078     if [ -s "${TMPDIR}/ds5_vlvindex_list" -o \
4079          -s "${TMPDIR}/ds6_vlvindex_list" ]; then
4080         display_msg display_vlv_list
4081     fi
4082
4083     if [ -s "${TMPDIR}/ds5_vlvindex_list" ]; then
4084         cat ${TMPDIR}/ds5_vlvindex_list
4085     fi
4086
4087     cat << EOF
4088
4089
4090 EOF
4091
4092     if [ -s "${TMPDIR}/ds6_vlvindex_list" ]; then
4093         cat ${TMPDIR}/ds6_vlvindex_list
4094     fi
4095 }
4096
4097 #
4098 # keep_backward_compatibility(): Modify schema for the backward compatibility if
4099 # there are the incompatible attributes already
4100 #
4101 keep_backward_compatibility()
4102 {
4103     ${EVAL} "${LDAPSEARCH} ${SERVER_ARGS} -b cn=schema -s base \
4104         \"objectclass=*\" attributeTypes | ${GREP} -i memberGid-oid ${VERB}"
4105     if [ $? -eq 0 ]; then
4106         ${SED} -e 's/1\.3\.6\.1\.4\.1\.42\.2\.27\.5\.1\.30\ /memberGid-oid\ /' \
4107             ${TMPDIR}/schema_attr > ${TMPDIR}/schema_attr.new
4108         ${MV} ${TMPDIR}/schema_attr.new ${TMPDIR}/schema_attr
4109     fi
4110
4111     ${EVAL} "${LDAPSEARCH} ${SERVER_ARGS} -b cn=schema -s base \
4112         \"objectclass=*\" attributeTypes | ${GREP} -i rfc822mailMember-oid \
4113         ${VERB}"
4114     if [ $? -eq 0 ]; then
4115         ${SED} -e \
4116             's/1\.3\.6\.1\.4\.1\.42\.2\.27\.2\.1\.15\ /rfc822mailMember-oid\ /' \
4117             ${TMPDIR}/schema_attr > ${TMPDIR}/schema_attr.new
4118         ${MV} ${TMPDIR}/schema_attr.new ${TMPDIR}/schema_attr
4119     fi
4120 }
4121
4122 #
4123 # update_schema_attr(): Update Schema to support Naming.
4124 #
4125 update_schema_attr()
4126 {
4127     [ $DEBUG -eq 1 ] && ${ECHO} "In update_schema_attr()"
4128
4129     ( cat <<EOF
4130 dn: cn=schema
4131 changetype: modify
4132 add: attributetypes
4133 attributetypes: ( 1.3.6.1.1.1.1.28 NAME 'nisPublickey' DESC 'NIS public key' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4134 attributetypes: ( 1.3.6.1.1.1.1.29 NAME 'nisSecretkey' DESC 'NIS secret key' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4135 attributetypes: ( 1.3.6.1.1.1.1.30 NAME 'nisDomain' DESC 'NIS domain' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4136 attributetypes: ( 1.3.6.1.1.1.1.31 NAME 'automountMapName' DESC 'automount Map Name' EQUALITY caseExactIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4137 attributetypes: ( 1.3.6.1.1.1.1.32 NAME 'automountKey' DESC 'automount Key Value' EQUALITY caseExactIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4138 attributetypes: ( 1.3.6.1.1.1.1.33 NAME 'automountInformation' DESC 'automount information' EQUALITY caseExactIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4139 attributetypes: ( 1.3.6.1.4.1.42.2.27.1.1.12 NAME 'nisNetIdUser' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
4140 attributetypes: ( 1.3.6.1.4.1.42.2.27.1.1.13 NAME 'nisNetIdGroup' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
4141 attributetypes: ( 1.3.6.1.4.1.42.2.27.1.1.14 NAME 'nisNetIdHost' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
4142 attributetypes: ( 1.3.6.1.4.1.42.2.27.2.1.15 NAME 'rfc822mailMember' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
4143 attributetypes: ( 2.16.840.1.113730.3.1.30 NAME 'mgrpRFC822MailMember' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4144 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.15 NAME 'SolarisLDAPServers' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4145 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.16 NAME 'SolarisSearchBaseDN' SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE )
4146 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.17 NAME 'SolarisCacheTTL' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4147 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.18 NAME 'SolarisBindDN' SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE )
4148 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.19 NAME 'SolarisBindPassword' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4149 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.20 NAME 'SolarisAuthMethod' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4150 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.21 NAME 'SolarisTransportSecurity' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4151 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.22 NAME 'SolarisCertificatePath' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4152 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.23 NAME 'SolarisCertificatePassword' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4153 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.24 NAME 'SolarisDataSearchDN' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4154 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.25 NAME 'SolarisSearchScope' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4155 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.26 NAME 'SolarisSearchTimeLimit' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4156 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.27 NAME 'SolarisPreferredServer' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4157 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.28 NAME 'SolarisPreferredServerOnly' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4158 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.29 NAME 'SolarisSearchReferral' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4159 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.4 NAME 'SolarisAttrKeyValue' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4160 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.5 NAME 'SolarisAuditAlways' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4161 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.6 NAME 'SolarisAuditNever' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4162 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.7 NAME 'SolarisAttrShortDesc' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4163 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.8 NAME 'SolarisAttrLongDesc' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4164 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.9 NAME 'SolarisKernelSecurityPolicy' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4165 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.10 NAME 'SolarisProfileType' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4166 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.11 NAME 'SolarisProfileId' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4167 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.12 NAME 'SolarisUserQualifier' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4168 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.13 NAME 'SolarisAttrReserved1' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4169 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.14 NAME 'SolarisAttrReserved2' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4170 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.1 NAME 'SolarisProjectID' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4171 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.2 NAME 'SolarisProjectName' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4172 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.3 NAME 'SolarisProjectAttr' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
4173 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.30 NAME 'memberGid' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
4174 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.0 NAME 'defaultServerList' DESC 'Default LDAP server host address used by a DUA' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4175 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.1 NAME 'defaultSearchBase' DESC 'Default LDAP base DN used by a DUA' SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE )
4176 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.2 NAME 'preferredServerList' DESC 'Preferred LDAP server host addresses to be used by a DUA' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4177 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.3 NAME 'searchTimeLimit' DESC 'Maximum time in seconds a DUA should allow for a search to complete' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4178 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.4 NAME 'bindTimeLimit' DESC 'Maximum time in seconds a DUA should allow for the bind operation to complete' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4179 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.5 NAME 'followReferrals' DESC 'Tells DUA if it should follow referrals returned by a DSA search result' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4180 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.6 NAME 'authenticationMethod' DESC 'A keystring which identifies the type of authentication method used to contact the DSA' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4181 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.7 NAME 'profileTTL' DESC 'Time to live before a client DUA should re-read this configuration profile' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4182 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.14 NAME 'serviceSearchDescriptor' DESC 'LDAP search descriptor list used by Naming-DUA' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
4183 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.9 NAME 'attributeMap' DESC 'Attribute mappings used by a Naming-DUA' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4184 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.10 NAME 'credentialLevel' DESC 'Identifies type of credentials a DUA should use when binding to the LDAP server' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4185 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.11 NAME 'objectclassMap' DESC 'Objectclass mappings used by a Naming-DUA' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4186 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.12 NAME 'defaultSearchScope' DESC 'Default search scope used by a DUA' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4187 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.13 NAME 'serviceCredentialLevel' DESC 'Search scope used by a service of the DUA' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 )
4188 attributetypes: ( 1.3.6.1.4.1.11.1.3.1.1.15 NAME 'serviceAuthenticationMethod' DESC 'Authentication Method used by a service of the DUA' EQUALITY caseIgnoreMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4189 attributetypes: ( 1.3.18.0.2.4.1140 NAME 'printer-uri' DESC 'A URI supported by this printer.  This URI SHOULD be used as a relative distinguished name (RDN).  If printer-xri-supported is implemented, then this URI value MUST be listed in a member value of printer-xri-supported.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4190 attributetypes: ( 1.3.18.0.2.4.1107 NAME 'printer-xri-supported' DESC 'The unordered list of XRI (extended resource identifiers) supported by this printer.  Each member of the list consists of a URI (uniform resource identifier) followed by optional authentication and security metaparameters.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4191 attributetypes: ( 1.3.18.0.2.4.1135 NAME 'printer-name' DESC 'The site-specific administrative name of this printer, more end-user friendly than a URI.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127}  SINGLE-VALUE )
4192 attributetypes: ( 1.3.18.0.2.4.1119 NAME 'printer-natural-language-configured' DESC 'The configured language in which error and status messages will be generated (by default) by this printer.  Also, a possible language for printer string attributes set by operator, system administrator, or manufacturer.  Also, the (declared) language of the "printer-name", "printer-location", "printer-info", and "printer-make-and-model" attributes of this printer. For example: "en-us" (US English) or "fr-fr" (French in France) Legal values of language tags conform to [RFC3066] "Tags for the Identification of Languages".' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127}  SINGLE-VALUE )
4193 attributetypes: ( 1.3.18.0.2.4.1136 NAME 'printer-location' DESC 'Identifies the location of the printer. This could include things like: "in Room 123A", "second floor of building XYZ".' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE )
4194 attributetypes: ( 1.3.18.0.2.4.1139 NAME 'printer-info' DESC 'Identifies the descriptive information about this printer.  This could include things like: "This printer can be used for printing color transparencies for HR presentations", or "Out of courtesy for others, please print only small (1-5 page) jobs at this printer", or even "This printer is going away on July 1, 1997, please find a new printer".' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE )
4195 attributetypes: ( 1.3.18.0.2.4.1134 NAME 'printer-more-info' DESC 'A URI used to obtain more information about this specific printer.  For example, this could be an HTTP type URI referencing an HTML page accessible to a Web Browser.  The information obtained from this URI is intended for end user consumption.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4196 attributetypes: ( 1.3.18.0.2.4.1138 NAME 'printer-make-and-model' DESC 'Identifies the make and model of the device.  The device manufacturer MAY initially populate this attribute.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.15{127}  SINGLE-VALUE )
4197 attributetypes: ( 1.3.18.0.2.4.1133 NAME 'printer-ipp-versions-supported' DESC 'Identifies the IPP protocol version(s) that this printer supports, including major and minor versions, i.e., the version numbers for which this Printer implementation meets the conformance requirements.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} )
4198 attributetypes: ( 1.3.18.0.2.4.1132 NAME 'printer-multiple-document-jobs-supported' DESC 'Indicates whether or not the printer supports more than one document per job, i.e., more than one Send-Document or Send-Data operation with document data.' EQUALITY booleanMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE )
4199 attributetypes: ( 1.3.18.0.2.4.1109 NAME 'printer-charset-configured' DESC 'The configured charset in which error and status messages will be generated (by default) by this printer.  Also, a possible charset for printer string attributes set by operator, system administrator, or manufacturer.  For example: "utf-8" (ISO 10646/Unicode) or "iso-8859-1" (Latin1).  Legal values are defined by the IANA Registry of Coded Character Sets and the "(preferred MIME name)" SHALL be used as the tag.  For coherence with IPP Model, charset tags in this attribute SHALL be lowercase normalized.  This attribute SHOULD be static (time of registration) and SHOULD NOT be dynamically refreshed attributetypes: (subsequently).' EQUALITY caseIgnoreMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{63} SINGLE-VALUE )
4200 attributetypes: ( 1.3.18.0.2.4.1131 NAME 'printer-charset-supported' DESC 'Identifies the set of charsets supported for attribute type values of type Directory String for this directory entry.  For example: "utf-8" (ISO 10646/Unicode) or "iso-8859-1" (Latin1).  Legal values are defined by the IANA Registry of Coded Character Sets and the preferred MIME name.' EQUALITY caseIgnoreMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{63} )
4201 attributetypes: ( 1.3.18.0.2.4.1137 NAME 'printer-generated-natural-language-supported' DESC 'Identifies the natural language(s) supported for this directory entry.  For example: "en-us" (US English) or "fr-fr" (French in France).  Legal values conform to [RFC3066], Tags for the Identification of Languages.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{63} )
4202 attributetypes: ( 1.3.18.0.2.4.1130 NAME 'printer-document-format-supported' DESC 'The possible document formats in which data may be interpreted and printed by this printer.  Legal values are MIME types come from the IANA Registry of Internet Media Types.' EQUALITY caseIgnoreMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} )
4203 attributetypes: ( 1.3.18.0.2.4.1129 NAME 'printer-color-supported' DESC 'Indicates whether this printer is capable of any type of color printing at all, including highlight color.' EQUALITY booleanMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE )
4204 attributetypes: ( 1.3.18.0.2.4.1128 NAME 'printer-compression-supported' DESC 'Compression algorithms supported by this printer.  For example: "deflate, gzip".  Legal values include; "none", "deflate" attributetypes: (public domain ZIP), "gzip" (GNU ZIP), "compress" (UNIX).' EQUALITY caseIgnoreMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{255} )
4205 attributetypes: ( 1.3.18.0.2.4.1127 NAME 'printer-pages-per-minute' DESC 'The nominal number of pages per minute which may be output by this printer (e.g., a simplex or black-and-white printer).  This attribute is informative, NOT a service guarantee.  Typically, it is the value used in marketing literature to describe this printer.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4206 attributetypes: ( 1.3.18.0.2.4.1126 NAME 'printer-pages-per-minute-color' DESC 'The nominal number of color pages per minute which may be output by this printer (e.g., a simplex or color printer).  This attribute is informative, NOT a service guarantee.  Typically, it is the value used in marketing literature to describe this printer.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4207 attributetypes: ( 1.3.18.0.2.4.1125 NAME 'printer-finishings-supported' DESC 'The possible finishing operations supported by this printer. Legal values include; "none", "staple", "punch", "cover", "bind", "saddle-stitch", "edge-stitch", "staple-top-left", "staple-bottom-left", "staple-top-right", "staple-bottom-right", "edge-stitch-left", "edge-stitch-top", "edge-stitch-right", "edge-stitch-bottom", "staple-dual-left", "staple-dual-top", "staple-dual-right", "staple-dual-bottom".' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{255} )
4208 attributetypes: ( 1.3.18.0.2.4.1124 NAME 'printer-number-up-supported' DESC 'The possible numbers of print-stream pages to impose upon a single side of an instance of a selected medium. Legal values include; 1, 2, and 4.  Implementations may support other values.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.27 )
4209 attributetypes: ( 1.3.18.0.2.4.1123 NAME 'printer-sides-supported' DESC 'The number of impression sides (one or two) and the two-sided impression rotations supported by this printer.  Legal values include; "one-sided", "two-sided-long-edge", "two-sided-short-edge".' EQUALITY caseIgnoreMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} )
4210 attributetypes: ( 1.3.18.0.2.4.1122 NAME 'printer-media-supported' DESC 'The standard names/types/sizes (and optional color suffixes) of the media supported by this printer.  For example: "iso-a4",  "envelope", or "na-letter-white".  Legal values  conform to ISO 10175, Document Printing Application (DPA), and any IANA registered extensions.' EQUALITY caseIgnoreMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{255} )
4211 attributetypes: ( 1.3.18.0.2.4.1117 NAME 'printer-media-local-supported' DESC 'Site-specific names of media supported by this printer, in the language in "printer-natural-language-configured".  For example: "purchasing-form" (site-specific name) as opposed to (in "printer-media-supported"): "na-letter" (standard keyword from ISO 10175).' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{255} )
4212 attributetypes: ( 1.3.18.0.2.4.1121 NAME 'printer-resolution-supported' DESC 'List of resolutions supported for printing documents by this printer.  Each resolution value is a string with 3 fields:  1) Cross feed direction resolution (positive integer), 2) Feed direction resolution (positive integer), 3) Resolution unit.  Legal values are "dpi" (dots per inch) and "dpcm" (dots per centimeter).  Each resolution field is delimited by ">".  For example:  "300> 300> dpi>".' EQUALITY caseIgnoreMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{255} )
4213 attributetypes: ( 1.3.18.0.2.4.1120 NAME 'printer-print-quality-supported' DESC 'List of print qualities supported for printing documents on this printer.  For example: "draft, normal".  Legal values include; "unknown", "draft", "normal", "high".' EQUALITY caseIgnoreMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} )
4214 attributetypes: ( 1.3.18.0.2.4.1110 NAME 'printer-job-priority-supported' DESC 'Indicates the number of job priority levels supported.  An IPP conformant printer which supports job priority must always support a full range of priorities from "1" to "100" (to ensure consistent behavior), therefore this attribute describes the "granularity".  Legal values of this attribute are from "1" to "100".' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4215 attributetypes: ( 1.3.18.0.2.4.1118 NAME 'printer-copies-supported' DESC 'The maximum number of copies of a document that may be printed as a single job.  A value of "0" indicates no maximum limit.  A value of "-1" indicates unknown.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4216 attributetypes: ( 1.3.18.0.2.4.1111 NAME 'printer-job-k-octets-supported' DESC 'The maximum size in kilobytes (1,024 octets actually) incoming print job that this printer will accept.  A value of "0" indicates no maximum limit.  A value of "-1" indicates unknown.' EQUALITY integerMatch ORDERING integerOrderingMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE )
4217 attributetypes: ( 1.3.18.0.2.4.1112 NAME 'printer-current-operator' DESC 'The name of the current human operator responsible for operating this printer.  It is suggested that this string include information that would enable other humans to reach the operator, such as a phone number.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} SINGLE-VALUE )
4218 attributetypes: ( 1.3.18.0.2.4.1113 NAME 'printer-service-person' DESC 'The name of the current human service person responsible for servicing this printer.  It is suggested that this string include information that would enable other humans to reach the service person, such as a phone number.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127}  SINGLE-VALUE )
4219 attributetypes: ( 1.3.18.0.2.4.1114 NAME 'printer-delivery-orientation-supported' DESC 'The possible delivery orientations of pages as they are printed and ejected from this printer.  Legal values include; "unknown", "face-up", and "face-down".' EQUALITY caseIgnoreMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} )
4220 attributetypes: ( 1.3.18.0.2.4.1115 NAME 'printer-stacking-order-supported' DESC 'The possible stacking order of pages as they are printed and ejected from this printer. Legal values include; "unknown", "first-to-last", "last-to-first".' EQUALITY caseIgnoreMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} )
4221 attributetypes: ( 1.3.18.0.2.4.1116 NAME 'printer-output-features-supported' DESC 'The possible output features supported by this printer. Legal values include; "unknown", "bursting", "decollating", "page-collating", "offset-stacking".' EQUALITY caseIgnoreMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} )
4222 attributetypes: ( 1.3.18.0.2.4.1108 NAME 'printer-aliases' DESC 'Site-specific administrative names of this printer in addition the printer name specified for printer-name.' EQUALITY caseIgnoreMatch ORDERING caseIgnoreOrderingMatch SUBSTR caseIgnoreSubstringsMatch SYNTAX  1.3.6.1.4.1.1466.115.121.1.15{127} )
4223 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.63 NAME 'sun-printer-bsdaddr' DESC 'Sets the server, print queue destination name and whether the client generates protocol extensions. "Solaris" specifies a Solaris print server extension. The value is represented by the following value: server "," destination ", Solaris".' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 SINGLE-VALUE )
4224 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.64 NAME 'sun-printer-kvp' DESC 'This attribute contains a set of key value pairs which may have meaning to the print subsystem or may be user defined. Each value is represented by the following: key "=" value.' SYNTAX 1.3.6.1.4.1.1466.115.121.1.15 )
4225 attributetypes: ( 1.3.6.1.4.1.42.2.27.5.1.57 NAME 'nisplusTimeZone' DESC 'tzone column from NIS+ timezone table' SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE )
4226 EOF
4227 ) > ${TMPDIR}/schema_attr
4228
4229     keep_backward_compatibility
4230
4231     # Add the entry.
4232     ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/schema_attr ${VERB}"
4233     if [ $? -ne 0 ]; then
4234         ${ECHO} "  ERROR: update of schema attributes failed!"
4235         cleanup
4236         exit 1
4237     fi
4238
4239     # Display message that schema is updated.
4240     ${ECHO} "  ${STEP}. Schema attributes have been updated."
4241     STEP=`expr $STEP + 1`
4242 }
4243
4244
4245 #
4246 # update_schema_obj(): Update the schema objectclass definitions.
4247 #
4248 update_schema_obj()
4249 {
4250     [ $DEBUG -eq 1 ] && ${ECHO} "In update_schema_obj()"
4251
4252     # Add the objectclass definitions.
4253     ( cat <<EOF
4254 dn: cn=schema
4255 changetype: modify
4256 add: objectclasses
4257 objectclasses: ( 1.3.6.1.1.1.2.14 NAME 'NisKeyObject' SUP top MUST ( cn $ nisPublickey $ nisSecretkey ) MAY ( uidNumber $ description ) )
4258
4259 dn: cn=schema
4260 changetype: modify
4261 add: objectclasses
4262 objectclasses: ( 1.3.6.1.1.1.2.15 NAME 'nisDomainObject' SUP top MUST nisDomain )
4263
4264 dn: cn=schema
4265 changetype: modify
4266 add: objectclasses
4267 objectclasses: ( 1.3.6.1.1.1.2.16 NAME 'automountMap' SUP top MUST automountMapName MAY description )
4268
4269 dn: cn=schema
4270 changetype: modify
4271 add: objectclasses
4272 objectclasses: ( 1.3.6.1.1.1.2.17 NAME 'automount' SUP top MUST ( automountKey $ automountInformation ) MAY description )
4273
4274 dn: cn=schema
4275 changetype: modify
4276 add: objectclasses
4277 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.7 NAME 'SolarisNamingProfile' SUP top MUST ( cn $ SolarisLDAPservers $ SolarisSearchBaseDN ) MAY ( SolarisBindDN $ SolarisBindPassword $ SolarisAuthMethod $ SolarisTransportSecurity $ SolarisCertificatePath $ SolarisCertificatePassword $ SolarisDataSearchDN $ SolarisSearchScope $ SolarisSearchTimeLimit $ SolarisPreferredServer $ SolarisPreferredServerOnly $ SolarisCacheTTL $ SolarisSearchReferral ) )
4278
4279 dn: cn=schema
4280 changetype: modify
4281 add: objectclasses
4282 objectclasses: ( 2.16.840.1.113730.3.2.4 NAME 'mailGroup' SUP top MUST mail MAY ( cn $ mgrpRFC822MailMember ) )
4283
4284 dn: cn=schema
4285 changetype: modify
4286 add: objectclasses
4287 objectclasses: ( 1.3.6.1.4.1.42.2.27.1.2.5 NAME 'nisMailAlias' SUP top MUST cn MAY rfc822mailMember )
4288
4289 dn: cn=schema
4290 changetype: modify
4291 add: objectclasses
4292 objectclasses: ( 1.3.6.1.4.1.42.2.27.1.2.6 NAME 'nisNetId' SUP top MUST cn MAY ( nisNetIdUser $ nisNetIdGroup $ nisNetIdHost ) )
4293
4294 dn: cn=schema
4295 changetype: modify
4296 add: objectclasses
4297 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.2 NAME 'SolarisAuditUser' SUP top AUXILIARY MAY ( SolarisAuditAlways $ SolarisAuditNever ) )
4298
4299 dn: cn=schema
4300 changetype: modify
4301 add: objectclasses
4302 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.3 NAME 'SolarisUserAttr' SUP top AUXILIARY MAY ( SolarisUserQualifier $ SolarisAttrReserved1 $ SolarisAttrReserved2 $ SolarisAttrKeyValue ) )
4303
4304 dn: cn=schema
4305 changetype: modify
4306 add: objectclasses
4307 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.4 NAME 'SolarisAuthAttr' SUP top MUST cn MAY ( SolarisAttrReserved1 $ SolarisAttrReserved2 $ SolarisAttrShortDesc $ SolarisAttrLongDesc $ SolarisAttrKeyValue ) )
4308
4309 dn: cn=schema
4310 changetype: modify
4311 add: objectclasses
4312 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.5 NAME 'SolarisProfAttr' SUP top MUST cn MAY ( SolarisAttrReserved1 $ SolarisAttrReserved2 $ SolarisAttrLongDesc $ SolarisAttrKeyValue ) )
4313
4314 dn: cn=schema
4315 changetype: modify
4316 add: objectclasses
4317 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.6 NAME 'SolarisExecAttr' SUP top AUXILIARY MAY ( SolarisKernelSecurityPolicy $ SolarisProfileType $ SolarisAttrReserved1 $ SolarisAttrReserved2 $ SolarisProfileID $ SolarisAttrKeyValue ) )
4318
4319 dn: cn=schema
4320 changetype: modify
4321 add: objectclasses
4322 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.1 NAME 'SolarisProject' SUP top MUST ( SolarisProjectID $ SolarisProjectName ) MAY ( memberUid $ memberGid $ description $ SolarisProjectAttr ) )
4323
4324 dn: cn=schema
4325 changetype: modify
4326 add: objectclasses
4327 objectclasses: ( 1.3.6.1.4.1.11.1.3.1.2.4 NAME 'DUAConfigProfile' SUP top DESC 'Abstraction of a base configuration for a DUA' MUST cn MAY ( defaultServerList $ preferredServerList $ defaultSearchBase $ defaultSearchScope $ searchTimeLimit $ bindTimeLimit $ credentialLevel $ authenticationMethod $ followReferrals $ serviceSearchDescriptor $ serviceCredentialLevel $ serviceAuthenticationMethod $ objectclassMap $ attributeMap $ profileTTL ) )
4328
4329 dn: cn=schema
4330 changetype: modify
4331 add: objectclasses
4332 objectclasses: ( 1.3.18.0.2.6.2549 NAME 'slpService' DESC 'DUMMY definition' SUP top MUST objectclass )
4333
4334 dn: cn=schema
4335 changetype: modify
4336 add: objectclasses
4337 objectclasses: ( 1.3.18.0.2.6.254 NAME 'slpServicePrinter' DESC 'Service Location Protocol (SLP) information.' SUP slpService AUXILIARY )
4338
4339 dn: cn=schema
4340 changetype: modify
4341 add: objectclasses
4342 objectclasses: ( 1.3.18.0.2.6.258 NAME 'printerAbstract' DESC 'Printer related information.' SUP top ABSTRACT MAY ( printer-name $ printer-natural-language-configured $ printer-location $ printer-info $ printer-more-info $ printer-make-and-model $ printer-multiple-document-jobs-supported $ printer-charset-configured $ printer-charset-supported $ printer-generated-natural-language-supported $ printer-document-format-supported $ printer-color-supported $ printer-compression-supported $ printer-pages-per-minute $ printer-pages-per-minute-color $ printer-finishings-supported $ printer-number-up-supported $ printer-sides-supported $ printer-media-supported $ printer-media-local-supported $ printer-resolution-supported $ printer-print-quality-supported $ printer-job-priority-supported $ printer-copies-supported $ printer-job-k-octets-supported $ printer-current-operator $ printer-service-person $ printer-delivery-orientation-supported $ printer-stacking-order-supported $ printer-output-features-supported ) )
4343
4344 dn: cn=schema
4345 changetype: modify
4346 add: objectclasses
4347 objectclasses: ( 1.3.18.0.2.6.255 NAME 'printerService' DESC 'Printer information.' SUP printerAbstract STRUCTURAL MAY ( printer-uri $ printer-xri-supported ) )
4348
4349 dn: cn=schema
4350 changetype: modify
4351 add: objectclasses
4352 objectclasses: ( 1.3.18.0.2.6.257 NAME 'printerServiceAuxClass' DESC 'Printer information.' SUP printerAbstract AUXILIARY MAY ( printer-uri $ printer-xri-supported ) )
4353
4354 dn: cn=schema
4355 changetype: modify
4356 add: objectclasses
4357 objectclasses: ( 1.3.18.0.2.6.256 NAME 'printerIPP' DESC 'Internet Printing Protocol (IPP) information.' SUP top AUXILIARY MAY ( printer-ipp-versions-supported $ printer-multiple-document-jobs-supported ) )
4358
4359 dn: cn=schema
4360 changetype: modify
4361 add: objectclasses
4362 objectclasses: ( 1.3.18.0.2.6.253 NAME 'printerLPR' DESC 'LPR information.' SUP top AUXILIARY MUST printer-name MAY printer-aliases )
4363
4364 dn: cn=schema
4365 changetype: modify
4366 add: objectclasses
4367 objectclasses: ( 1.3.6.1.4.1.42.2.27.5.2.14 NAME 'sunPrinter' DESC 'Sun printer information' SUP top AUXILIARY MUST printer-name MAY ( sun-printer-bsdaddr $ sun-printer-kvp ) )
4368
4369 dn: cn=schema
4370 changetype: modify
4371 add: objectclasses
4372 objectclasses:  ( 1.3.6.1.4.1.42.2.27.5.2.12 NAME 'nisplusTimeZoneData' DESC 'NIS+ timezone table data' SUP top STRUCTURAL MUST cn MAY ( nisplusTimeZone $ description ) )
4373 EOF
4374 ) > ${TMPDIR}/schema_obj
4375
4376     # Add the entry.
4377     ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/schema_obj ${VERB}"
4378     if [ $? -ne 0 ]; then
4379         ${ECHO} "  ERROR: update of schema objectclass definitions failed!"
4380         cleanup
4381         exit 1
4382     fi
4383
4384     # Display message that schema is updated.
4385     ${ECHO} "  ${STEP}. Schema objectclass definitions have been added."
4386     STEP=`expr $STEP + 1`
4387 }
4388
4389 #
4390 # modify_top_aci(): Modify the ACI for the top entry to disable self modify
4391 #                   of user attributes.
4392 #
4393 modify_top_aci()
4394 {
4395     [ $DEBUG -eq 1 ] && ${ECHO} "In modify_top_aci()"
4396
4397     # Set ACI Name
4398     ACI_NAME="LDAP_Naming_Services_deny_write_access"
4399
4400     # Search for ACI_NAME
4401     eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base objectclass=* aci > ${TMPDIR}/chk_top_aci 2>&1"
4402     if [ $? -ne 0 ]; then
4403         ${ECHO} "Error searching aci for ${LDAP_BASEDN}"
4404         cat ${TMPDIR}/chk_top_aci
4405         cleanup
4406         exit 1
4407     fi
4408     ${GREP} "${ACI_NAME}" ${TMPDIR}/chk_top_aci > /dev/null 2>&1
4409     if [ $? -eq 0 ]; then
4410         ${ECHO} "  ${STEP}. Top level ACI ${ACI_NAME} already exists for ${LDAP_BASEDN}."
4411         STEP=`expr $STEP + 1`
4412         return 0
4413     fi
4414
4415     # Crate LDIF for top level ACI.
4416     ( cat <<EOF
4417 dn: ${LDAP_BASEDN}
4418 changetype: modify
4419 add: aci
4420 aci: (targetattr = "cn||uid||uidNumber||gidNumber||homeDirectory||shadowLastChange||shadowMin||shadowMax||shadowWarning||shadowInactive||shadowExpire||shadowFlag||memberUid||SolarisAttrKeyValue||SolarisAttrReserved1||SolarisAttrReserved2||SolarisUserQualifier")(version 3.0; acl ${ACI_NAME}; deny (write) userdn = "ldap:///self";)
4421 -
4422 EOF
4423 ) > ${TMPDIR}/top_aci
4424
4425     # Add the entry.
4426     ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/top_aci ${VERB}"
4427     if [ $? -ne 0 ]; then
4428         ${ECHO} "  ERROR: Modify of top level ACI failed! (restricts self modify)"
4429         cleanup
4430         exit 1
4431     fi
4432
4433     # Display message that ACI is updated.
4434     MSG="ACI for ${LDAP_BASEDN} modified to disable self modify."
4435     if [ $EXISTING_PROFILE -eq 1 ];then
4436         ${ECHO} "  ACI SET: $MSG"
4437     else
4438         ${ECHO} "  ${STEP}. $MSG"
4439         STEP=`expr $STEP + 1`
4440     fi
4441 }
4442
4443 #
4444 # find_and_delete_ACI(): Find an ACI in file $2 with a matching pattern $1.
4445 # Delete the ACI and print a message using $3 as the ACI name. $3 is needed
4446 # because it could have a different value than that of $1.
4447 find_and_delete_ACI()
4448 {
4449     [ $DEBUG -eq 1 ] && ${ECHO} "In find_and_delete_ACI"
4450
4451     # if an ACI with pattern $1 exists in file $2, delete it from ${LDAP_BASEDN}
4452     ${EGREP} $1 $2 | ${SED} -e 's/aci=//' > ${TMPDIR}/grep_find_delete_aci 2>&1
4453     if [ -s ${TMPDIR}/grep_find_delete_aci ]; then
4454         aci_to_delete=`${CAT} ${TMPDIR}/grep_find_delete_aci`
4455
4456         # Create the tmp file to delete the ACI.
4457         ( cat <<EOF
4458 dn: ${LDAP_BASEDN}
4459 changetype: modify
4460 delete: aci
4461 aci: ${aci_to_delete}
4462 EOF
4463         ) > ${TMPDIR}/find_delete_aci
4464
4465         # Delete the ACI
4466         ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/find_delete_aci ${VERB}"
4467         if [ $? -ne 0 ]; then
4468             ${ECHO} "  ERROR: Remove of $3 ACI failed!"
4469             cleanup
4470             exit 1
4471         fi
4472
4473         ${RM} -f ${TMPDIR}/find_delete_aci
4474         # Display message that an ACL is deleted.
4475         MSG="ACI $3 deleted."
4476         if [ $EXISTING_PROFILE -eq 1 ]; then
4477             ${ECHO} "  ACI DELETED: $MSG"
4478         else
4479             ${ECHO} "  ${STEP}. $MSG"
4480             STEP=`expr $STEP + 1`
4481         fi
4482     fi
4483 }
4484
4485 #
4486 # Add an ACI to deny non-admin access to shadow data when
4487 # shadow update is enabled.
4488 #
4489 deny_non_admin_shadow_access()
4490 {
4491     [ $DEBUG -eq 1 ] && ${ECHO} "In deny_non_admin_shadow_access()"
4492
4493     # Set ACI Names
4494     ACI_TO_ADD="LDAP_Naming_Services_deny_non_admin_shadow_access"
4495     ACI_TO_DEL="LDAP_Naming_Services_deny_non_host_shadow_access"
4496
4497     # Search for ACI_TO_ADD
4498     eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base objectclass=* aci > ${TMPDIR}/chk_aci_non_admin 2>&1"
4499     if [ $? -ne 0 ]; then
4500         ${ECHO} "Error searching aci for ${LDAP_BASEDN}"
4501         cleanup
4502         exit 1
4503     fi
4504
4505     # If an ACI with ${ACI_TO_ADD} already exists, we are done.
4506     ${EGREP} ${ACI_TO_ADD} ${TMPDIR}/chk_aci_non_admin 2>&1 > /dev/null
4507     if [ $? -eq 0 ]; then
4508         MSG="ACI ${ACI_TO_ADD} already set for ${LDAP_BASEDN}."
4509         if [ $EXISTING_PROFILE -eq 1 ]; then
4510             ${ECHO} "  NOT SET: $MSG"
4511         else
4512             ${ECHO} "  ${STEP}. $MSG"
4513             STEP=`expr $STEP + 1`
4514         fi
4515         return 0
4516     fi
4517
4518     # The deny_non_admin_shadow_access and deny_non_host_shadow_access ACIs
4519     # should be mutually exclusive, so if the latter exists, delete it.
4520     find_and_delete_ACI ${ACI_TO_DEL} ${TMPDIR}/chk_aci_non_admin ${ACI_TO_DEL}
4521
4522     # Create the tmp file to add.
4523     ( cat <<EOF
4524 dn: ${LDAP_BASEDN}
4525 changetype: modify
4526 add: aci
4527 aci: (target="ldap:///${LDAP_BASEDN}")(targetattr = "shadowLastChange||
4528  shadowMin|| shadowMax||shadowWarning||shadowInactive||shadowExpire||
4529  shadowFlag||userPassword") (version 3.0; acl ${ACI_TO_ADD};
4530  deny (write,read,search,compare) userdn != "ldap:///${LDAP_ADMINDN}";)
4531 EOF
4532 ) > ${TMPDIR}/non_admin_aci_write
4533
4534     # Add the entry.
4535     ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/non_admin_aci_write ${VERB}"
4536     if [ $? -ne 0 ]; then
4537         ${ECHO} "  ERROR: Adding ACI ${ACI_TO_ADD} failed!"
4538         ${CAT} ${TMPDIR}/non_admin_aci_write
4539         cleanup
4540         exit 1
4541     fi
4542
4543     ${RM} -f ${TMPDIR}/non_admin_aci_write
4544     # Display message that the non-admin access to shadow data is denied.
4545     MSG="Non-Admin access to shadow data denied."
4546     if [ $EXISTING_PROFILE -eq 1 ]; then
4547         ${ECHO} "  ACI SET: $MSG"
4548     else
4549         ${ECHO} "  ${STEP}. $MSG"
4550         STEP=`expr $STEP + 1`
4551     fi
4552 }
4553
4554 #
4555 # Add an ACI to deny non-host access to shadow data when
4556 # shadow update is enabled and auth Method if gssapi.
4557 #
4558 deny_non_host_shadow_access()
4559 {
4560     [ $DEBUG -eq 1 ] && ${ECHO} "In deny_non_host_shadow_access()"
4561
4562     # Set ACI Names
4563     ACI_TO_ADD="LDAP_Naming_Services_deny_non_host_shadow_access"
4564     ACI_TO_DEL="LDAP_Naming_Services_deny_non_admin_shadow_access"
4565
4566     # Search for ACI_TO_ADD
4567     eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base objectclass=* aci > ${TMPDIR}/chk_aci_non_host 2>&1"
4568     if [ $? -ne 0 ]; then
4569         ${ECHO} "Error searching aci for ${LDAP_BASEDN}"
4570         cleanup
4571         exit 1
4572     fi
4573
4574     # If an ACI with ${ACI_TO_ADD} already exists, we are done.
4575     ${EGREP} ${ACI_TO_ADD} ${TMPDIR}/chk_aci_non_host 2>&1 > /dev/null
4576     if [ $? -eq 0 ]; then
4577         MSG="ACI ${ACI_TO_ADD} already set for ${LDAP_BASEDN}."
4578         if [ $EXISTING_PROFILE -eq 1 ]; then
4579             ${ECHO} "  NOT SET: $MSG"
4580         else
4581             ${ECHO} "  ${STEP}. $MSG"
4582             STEP=`expr $STEP + 1`
4583         fi
4584         return 0
4585     fi
4586
4587     # The deny_non_admin_shadow_access and deny_non_host_shadow_access ACIs
4588     # should be mutually exclusive, so if the former exists, delete it.
4589     find_and_delete_ACI ${ACI_TO_DEL} ${TMPDIR}/chk_aci_non_host ${ACI_TO_DEL}
4590
4591     # Create the tmp file to add.
4592     ( cat <<EOF
4593 dn: ${LDAP_BASEDN}
4594 changetype: modify
4595 add: aci
4596 aci: (target="ldap:///${LDAP_BASEDN}")(targetattr = "shadowLastChange||
4597  shadowMin|| shadowMax||shadowWarning||shadowInactive||shadowExpire||
4598  shadowFlag||userPassword") (version 3.0; acl ${ACI_TO_ADD};
4599   deny (write,read,search,compare)
4600   userdn != "ldap:///cn=*+ipHostNumber=*,ou=Hosts,${LDAP_BASEDN}";)
4601 EOF
4602 ) > ${TMPDIR}/non_host_aci_write
4603
4604     # Add the entry.
4605     ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/non_host_aci_write ${VERB}"
4606     if [ $? -ne 0 ]; then
4607         ${ECHO} "  ERROR: Adding ACI ${ACI_TO_ADD} failed!"
4608         ${CAT} ${TMPDIR}/non_host_aci_write
4609         cleanup
4610         exit 1
4611     fi
4612
4613     ${RM} -f ${TMPDIR}/non_host_aci_write
4614     # Display message that the non-host access to shadow data is denied.
4615     MSG="Non-host access to shadow data is denied."
4616     if [ $EXISTING_PROFILE -eq 1 ]; then
4617         ${ECHO} "  ACI SET: $MSG"
4618     else
4619         ${ECHO} "  ${STEP}. $MSG"
4620         STEP=`expr $STEP + 1`
4621     fi
4622 }
4623
4624 #
4625 # add_vlv_aci(): Add access control information (aci) for VLV.
4626 #
4627 add_vlv_aci()
4628 {
4629     [ $DEBUG -eq 1 ] && ${ECHO} "In add_vlv_aci()"
4630
4631     # Add the VLV ACI.
4632     ( cat <<EOF
4633 dn: oid=2.16.840.1.113730.3.4.9,cn=features,cn=config
4634 changetype: modify
4635 replace: aci
4636 aci: (targetattr != "aci") (version 3.0; acl "VLV Request Control"; allow(read,search,compare) userdn = "ldap:///anyone";)
4637 EOF
4638 ) > ${TMPDIR}/vlv_aci
4639
4640     # Add the entry.
4641     ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/vlv_aci ${VERB}"
4642     if [ $? -ne 0 ]; then
4643         ${ECHO} "  ERROR: Add of VLV ACI failed!"
4644         cleanup
4645         exit 1
4646     fi
4647
4648     # Display message that schema is updated.
4649     ${ECHO} "  ${STEP}. Add of VLV Access Control Information (ACI)."
4650     STEP=`expr $STEP + 1`
4651 }
4652
4653
4654 #
4655 # set_nisdomain(): Add the NisDomainObject to the Base DN.
4656 #
4657 set_nisdomain()
4658 {
4659     [ $DEBUG -eq 1 ] && ${ECHO} "In set_nisdomain()"
4660
4661     # Check if nisDomain is already set.
4662     ${EVAL} "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base \
4663         \"objectclass=*\"" > ${TMPDIR}/chk_nisdomain 2>&1
4664     ${EVAL} "${GREP} -i nisDomain ${TMPDIR}/chk_nisdomain ${VERB}"
4665     if [ $? -eq 0 ]; then
4666         ${ECHO} "  ${STEP}. NisDomainObject for ${LDAP_BASEDN} was already set."
4667         STEP=`expr $STEP + 1`
4668         return 0
4669     fi
4670
4671     # Add the new top level containers.
4672     ( cat <<EOF
4673 dn: ${LDAP_BASEDN}
4674 changetype: modify
4675 objectclass: nisDomainObject
4676 nisdomain: ${LDAP_DOMAIN}
4677 EOF
4678 ) > ${TMPDIR}/nis_domain
4679
4680     # Add the entry.
4681     ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/nis_domain ${VERB}"
4682     if [ $? -ne 0 ]; then
4683         ${ECHO} "  ERROR: update of NisDomainObject in ${LDAP_BASEDN} failed."
4684         cleanup
4685         exit 1
4686     fi
4687
4688     # Display message that schema is updated.
4689     ${ECHO} "  ${STEP}. NisDomainObject added to ${LDAP_BASEDN}."
4690     STEP=`expr $STEP + 1`
4691 }
4692
4693
4694 #
4695 # check_attrName(): Check that the attribute name is valid.
4696 #              $1   Key to check.
4697 #         Returns   0 : valid name      1 : invalid name
4698 #
4699 check_attrName()
4700 {
4701     [ $DEBUG -eq 1 ] && ${ECHO} "In check_attrName()"
4702     [ $DEBUG -eq 1 ] && ${ECHO} "check_attrName: Input Param = $1"
4703
4704     ${ECHO} $1 | ${EGREP} '^[0-9]+(\.[0-9]+)*$' > /dev/null 2>&1
4705     if [ $? -eq 0 ]; then
4706         ${EVAL} "${LDAPSEARCH} ${SERVER_ARGS} -b cn=schema -s base \"objectclass=*\" \
4707                         attributeTypes | ${EGREP} -i '^attributetypes[ ]*=[ ]*\([ ]*$1 ' ${VERB}"
4708     else
4709         ${EVAL} "${LDAPSEARCH} ${SERVER_ARGS} -b cn=schema -s base \"objectclass=*\" \
4710                         attributeTypes | ${EGREP} -i \"'$1'\" ${VERB}"
4711     fi
4712
4713     if [ $? -ne 0 ]; then
4714         return 1
4715     else
4716         return 0
4717     fi
4718 }
4719
4720
4721 #
4722 # get_objectclass():   Determine the objectclass for the given attribute name
4723 #              $1   Attribute name to check.
4724 #      _ATTR_NAME   Return value, Object Name or NULL if unknown to idsconfig.
4725 #
4726 #      NOTE: An attribute name can be valid but still we might not be able
4727 #            to determine the objectclass from the table.
4728 #            In such cases, the user needs to create the necessary object(s).
4729 #
4730 get_objectclass()
4731 {
4732     [ $DEBUG -eq 1 ] && ${ECHO} "In get_objectclass()"
4733     [ $DEBUG -eq 1 ] && ${ECHO} "get_objectclass: Input Param = $1"
4734
4735     # Set return value to NULL string.
4736     _ATTR_NAME=""
4737
4738     # Test key for type:
4739     case `${ECHO} ${1} | tr '[A-Z]' '[a-z]'` in
4740         ou | organizationalunitname | 2.5.4.11) _ATTR_NAME="organizationalUnit" ;;
4741         dc | domaincomponent | 0.9.2342.19200300.100.1.25) _ATTR_NAME="domain" ;;
4742          o | organizationname | 2.5.4.10) _ATTR_NAME="organization" ;;
4743          c | countryname | 2.5.4.6) _ATTR_NAME="country" ;;
4744          *)  _ATTR_NAME="" ;;
4745     esac
4746
4747     [ $DEBUG -eq 1 ] && ${ECHO} "get_objectclass: _ATTR_NAME = $_ATTR_NAME"
4748 }
4749
4750
4751 #
4752 # add_base_objects(): Add any necessary base objects.
4753 #
4754 add_base_objects()
4755 {
4756     [ $DEBUG -eq 1 ] && ${ECHO} "In add_base_objects()"
4757
4758     # Convert to lower case for basename.
4759     format_string "${LDAP_BASEDN}"
4760     LOWER_BASEDN="${FMT_STR}"
4761     format_string "${LDAP_SUFFIX}"
4762     LOWER_SUFFIX="${FMT_STR}"
4763
4764     [ $DEBUG -eq 1 ] && ${ECHO} "LOWER_BASEDN: ${LOWER_BASEDN}"
4765     [ $DEBUG -eq 1 ] && ${ECHO} "LOWER_SUFFIX: ${LOWER_SUFFIX}"
4766
4767     # Create additional components.
4768     if [ "${LOWER_BASEDN}" = "${LOWER_SUFFIX}" ]; then
4769         [ $DEBUG -eq 1 ] && ${ECHO} "Base DN and Suffix equivalent"
4770     else
4771         # first, test that the suffix is valid
4772         dcstmp=`basename "${LOWER_BASEDN}" "${LOWER_SUFFIX}"`
4773         if [ "$dcstmp" = "${LOWER_BASEDN}" ]; then
4774             # should not happen since check_basedn_suffix() succeeded
4775             ${ECHO} "Invalid suffix ${LOWER_SUFFIX}"
4776             ${ECHO} "for Base DN ${LOWER_BASEDN}"
4777             cleanup
4778             exit 1
4779         fi
4780         # OK, suffix is valid, start working with LDAP_BASEDN
4781         # field separator is ',' (i.e., space is a valid character)
4782         dcstmp2="`${ECHO} ${LDAP_BASEDN} |
4783                 sed -e 's/[ ]*,[ ]*/,/g' -e 's/[ ]*=[ ]*/=/g'`"
4784         dcs=""
4785         # use dcstmp to count the loop, and dcstmp2 to get the correct
4786         # string case
4787         # dcs should be in reverse order, only for these components
4788         # that need to be added
4789         while [ -n "${dcstmp}" ]
4790         do
4791             i2=`${ECHO} "$dcstmp2" | cut -f1 -d','`
4792             dk=`${ECHO} $i2 | awk -F= '{print $1}'`
4793             dc=`${ECHO} $i2 | awk -F= '{print $2}'`
4794             dcs="$dk=$dc,$dcs";
4795             dcstmp2=`${ECHO} "$dcstmp2" | cut -f2- -d','`
4796             dcstmp=`${ECHO} "$dcstmp" | cut -f2- -d','`
4797             [ $DEBUG -eq 1 ] && \
4798                 ${ECHO} "dcs: ${dcs}\ndcstmp: ${dcstmp}\ndcstmp2: ${dcstmp2}\n"
4799         done
4800
4801
4802
4803         lastdc=${LDAP_SUFFIX}
4804         dc=`${ECHO} "${dcs}" | cut -f1 -d','`
4805         dcstmp=`${ECHO} "${dcs}" | cut -f2- -d','`
4806         while [ -n "${dc}" ]; do
4807             # Get Key and component from $dc.
4808             dk2=`${ECHO} $dc | awk -F= '{print $1}'`
4809             dc2=`${ECHO} $dc | awk -F= '{print $2}'`
4810
4811             # At this point, ${dk2} is a valid attribute name
4812
4813             # Check if entry exists first, if so, skip to next.
4814             ${LDAPSEARCH} ${SERVER_ARGS} -b "${dk2}=${dc2},$lastdc" -s base "objectclass=*" > /dev/null 2>&1
4815             if [ $? -eq 0 ]; then
4816                 # Set the $lastdc to new dc.
4817                 lastdc="${dk2}=${dc2},$lastdc"
4818
4819                 # Process next component.
4820                 dc=`${ECHO} "${dcstmp}" | cut -f1 -d','`
4821                 dcstmp=`${ECHO} "${dcstmp}" | cut -f2- -d','`
4822                 continue
4823
4824             fi
4825
4826             # Determine the objectclass for the entry.
4827             get_objectclass $dk2
4828             OBJ_Name=${_ATTR_NAME}
4829             if [ "${OBJ_Name}" = "" ]; then
4830                 ${ECHO} "Cannot determine objectclass for $dk2"
4831                 ${ECHO} "Please create ${dk2}=${dc2},$lastdc entry and rerun idsconfig"
4832                 exit 1
4833             fi
4834
4835             # Add the new container.
4836             ( cat <<EOF
4837 dn: ${dk2}=${dc2},$lastdc
4838 ${dk2}: $dc2
4839 objectClass: top
4840 objectClass: ${OBJ_Name}
4841 EOF
4842 ) > ${TMPDIR}/base_objects
4843
4844
4845             # Set the $lastdc to new dc.
4846             lastdc="${dk2}=${dc2},$lastdc"
4847
4848             # Add the entry.
4849             ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/base_objects ${VERB}"
4850             if [ $? -ne 0 ]; then
4851                 ${ECHO} "  ERROR: update of base objects ${dc} failed."
4852                 cleanup
4853                 exit 1
4854             fi
4855
4856             # Display message that schema is updated.
4857             ${ECHO} "  ${STEP}. Created DN component ${dc}."
4858             STEP=`expr $STEP + 1`
4859
4860             # Process next component.
4861             dc=`${ECHO} "${dcstmp}" | cut -f1 -d','`
4862             dcstmp=`${ECHO} "${dcstmp}" | cut -f2- -d','`
4863         done
4864     fi
4865 }
4866
4867
4868 #
4869 # add_new_containers(): Add the top level classes.
4870 #
4871 #    $1 = Base DN
4872 #
4873 add_new_containers()
4874 {
4875     [ $DEBUG -eq 1 ] && ${ECHO} "In add_new_containers()"
4876
4877     for ou in people group rpc protocols networks netgroup \
4878         aliases hosts services ethers profile printers projects \
4879         SolarisAuthAttr SolarisProfAttr Timezone; do
4880
4881         # Check if nismaps already exist.
4882         eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"ou=${ou},${LDAP_BASEDN}\" -s base \"objectclass=*\" ${VERB}"
4883         if [ $? -eq 0 ]; then
4884             continue
4885         fi
4886
4887         # Create TMP file to add.
4888         ( cat <<EOF
4889 dn: ou=${ou},${LDAP_BASEDN}
4890 ou: ${ou}
4891 objectClass: top
4892 objectClass: organizationalUnit
4893 EOF
4894 ) > ${TMPDIR}/toplevel.${ou}
4895
4896         # Add the entry.
4897         ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/toplevel.${ou} ${VERB}"
4898         if [ $? -ne 0 ]; then
4899             ${ECHO} "  ERROR: Add of ou=${ou} container failed!"
4900             cleanup
4901             exit 1
4902         fi
4903     done
4904
4905     # Display message that top level OU containers complete.
4906     ${ECHO} "  ${STEP}. Top level \"ou\" containers complete."
4907     STEP=`expr $STEP + 1`
4908 }
4909
4910
4911 #
4912 # add_auto_maps(): Add the automount map entries.
4913 #
4914 # auto_home, auto_direct, auto_master, auto_shared
4915 #
4916 add_auto_maps()
4917 {
4918     [ $DEBUG -eq 1 ] && ${ECHO} "In add_auto_maps()"
4919
4920     # Set AUTO_MAPS for maps to create.
4921     AUTO_MAPS="auto_home auto_direct auto_master auto_shared"
4922
4923     for automap in $AUTO_MAPS; do
4924         # Check if automaps already exist.
4925         eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"automountMapName=${automap},${LDAP_BASEDN}\" -s base \"objectclass=*\" ${VERB}"
4926         if [ $? -eq 0 ]; then
4927             continue
4928         fi
4929
4930         # Create the tmp file to add.
4931         ( cat <<EOF
4932 dn: automountMapName=${automap},${LDAP_BASEDN}
4933 automountMapName: ${automap}
4934 objectClass: top
4935 objectClass: automountMap
4936 EOF
4937 ) > ${TMPDIR}/automap.${automap}
4938
4939         # Add the entry.
4940         ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/automap.${automap} ${VERB}"
4941         if [ $? -ne 0 ]; then
4942             ${ECHO} "  ERROR: Add of automap ${automap} failed!"
4943             cleanup
4944             exit 1
4945         fi
4946     done
4947
4948     # Display message that automount entries are updated.
4949     ${ECHO} "  ${STEP}. automount maps: $AUTO_MAPS processed."
4950     STEP=`expr $STEP + 1`
4951 }
4952
4953
4954 #
4955 # add_proxyagent(): Add entry for nameservice to use to access server.
4956 #
4957 add_proxyagent()
4958 {
4959     [ $DEBUG -eq 1 ] && ${ECHO} "In add_proxyagent()"
4960
4961     # Check if proxy agent already exists.
4962     eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_PROXYAGENT}\" -s base \"objectclass=*\" ${VERB}"
4963     if [ $? -eq 0 ]; then
4964         ${ECHO} "  ${STEP}. Proxy Agent ${LDAP_PROXYAGENT} already exists."
4965         STEP=`expr $STEP + 1`
4966         return 0
4967     fi
4968
4969     # Get cn and sn names from LDAP_PROXYAGENT.
4970     cn_tmp=`${ECHO} ${LDAP_PROXYAGENT} | cut -f1 -d, | cut -f2 -d=`
4971
4972     # Create the tmp file to add.
4973     ( cat <<EOF
4974 dn: ${LDAP_PROXYAGENT}
4975 cn: ${cn_tmp}
4976 sn: ${cn_tmp}
4977 objectclass: top
4978 objectclass: person
4979 userpassword: ${LDAP_PROXYAGENT_CRED}
4980 EOF
4981 ) > ${TMPDIR}/proxyagent
4982
4983     # Add the entry.
4984     ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/proxyagent ${VERB}"
4985     if [ $? -ne 0 ]; then
4986         ${ECHO} "  ERROR: Adding proxyagent failed!"
4987         cleanup
4988         exit 1
4989     fi
4990
4991     # Display message that schema is updated.
4992     ${ECHO} "  ${STEP}. Proxy Agent ${LDAP_PROXYAGENT} added."
4993     STEP=`expr $STEP + 1`
4994 }
4995
4996 #
4997 # allow_proxy_read_pw(): Give Proxy Agent read permission for password.
4998 #
4999 allow_proxy_read_pw()
5000 {
5001     [ $DEBUG -eq 1 ] && ${ECHO} "In allow_proxy_read_pw()"
5002
5003     # Search for ACI_NAME
5004     eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base objectclass=* aci > ${TMPDIR}/chk_proxyread_aci 2>&1"
5005     ${GREP} "${PROXY_ACI_NAME}" ${TMPDIR}/chk_proxyread_aci > /dev/null 2>&1
5006     if [ $? -eq 0 ]; then
5007         ${ECHO} "  ${STEP}. Proxy ACI ${PROXY_ACI_NAME=} already exists for ${LDAP_BASEDN}."
5008         STEP=`expr $STEP + 1`
5009         return 0
5010     fi
5011
5012     # Create the tmp file to add.
5013     ( cat <<EOF
5014 dn: ${LDAP_BASEDN}
5015 changetype: modify
5016 add: aci
5017 aci: (target="ldap:///${LDAP_BASEDN}")(targetattr="userPassword")
5018   (version 3.0; acl ${PROXY_ACI_NAME}; allow (compare,read,search)
5019   userdn = "ldap:///${LDAP_PROXYAGENT}";)
5020 EOF
5021 ) > ${TMPDIR}/proxy_read
5022
5023     # Add the entry.
5024     ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/proxy_read ${VERB}"
5025     if [ $? -ne 0 ]; then
5026         ${ECHO} "  ERROR: Allow ${LDAP_PROXYAGENT} to read password failed!"
5027         cleanup
5028         exit 1
5029     fi
5030
5031     # Display message that schema is updated.
5032     ${ECHO} "  ${STEP}. Give ${LDAP_PROXYAGENT} read permission for password."
5033     STEP=`expr $STEP + 1`
5034 }
5035
5036 #  Delete Proxy Agent read permission for password.
5037 delete_proxy_read_pw()
5038 {
5039     [ $DEBUG -eq 1 ] && ${ECHO} "In delete_proxy_read_pw()"
5040
5041     # Search for ACI_NAME
5042     eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"${LDAP_BASEDN}\" -s base objectclass=* aci > ${TMPDIR}/chk_proxyread_aci 2>&1"
5043     ${GREP} "${PROXY_ACI_NAME}" ${TMPDIR}/chk_proxyread_aci | \
5044         ${SED} -e 's/aci=//' > ${TMPDIR}/grep_proxyread_aci 2>&1
5045     if [ $? -ne 0 ]; then
5046         ${ECHO} "Proxy ACI ${PROXY_ACI_NAME} does not exist for ${LDAP_BASEDN}."
5047         return 0
5048     fi
5049
5050     # We need to remove proxy agent's read access to user passwords,
5051     # but We do not know the value of the ${LDAP_PROXYAGENT} here, so
5052     # 1. if only one match found, delete it
5053     # 2. if more than one matches found, ask the user which one to delete
5054     HOWMANY=`${WC} -l ${TMPDIR}/grep_proxyread_aci | ${NAWK} '{print $1}'`
5055     if [ $HOWMANY -eq 0 ]; then
5056         ${ECHO} "Proxy ACI ${PROXY_ACI_NAME} does not exist for ${LDAP_BASEDN}."
5057         return 0
5058     fi
5059     if [ $HOWMANY -eq 1 ];then
5060         proxy_aci=`${CAT} ${TMPDIR}/grep_proxyread_aci`
5061     else
5062             ${CAT} << EOF
5063
5064 Proxy agent is not allowed to read user passwords when shadow
5065 update is enabled. There are more than one proxy agents found.
5066 Please select the currently proxy agent being used, so that
5067 idsconfig can remove its read access to user passwords.
5068
5069 The proxy agents are:
5070
5071 EOF
5072             # generate the proxy agent list
5073             ${SED} -e "s/.*ldap:\/\/\/.*ldap:\/\/\///" \
5074             ${TMPDIR}/grep_proxyread_aci | ${SED} -e "s/\";)//" > \
5075                 ${TMPDIR}/proxy_agent_list
5076
5077             # print the proxy agent list
5078             ${NAWK} '{print NR ": " $0}' ${TMPDIR}/proxy_agent_list
5079
5080             # ask the user to pick one
5081             _MENU_PROMPT="Select the proxy agent (1-$HOWMANY): "
5082             get_menu_choice "${_MENU_PROMPT}" "0" "$HOWMANY"
5083             _CH=$MN_CH
5084             proxy_aci=`${SED} -n "$_CH p" ${TMPDIR}/grep_proxyread_aci`
5085     fi
5086
5087     # Create the tmp file to delete the ACI.
5088     ( cat <<EOF
5089 dn: ${LDAP_BASEDN}
5090 changetype: modify
5091 delete: aci
5092 aci: ${proxy_aci}
5093 EOF
5094     ) > ${TMPDIR}/proxy_delete
5095
5096     # Delete the ACI
5097     ${EVAL} "${LDAPMODIFY} ${LDAP_ARGS} -f ${TMPDIR}/proxy_delete ${VERB}"
5098     if [ $? -ne 0 ]; then
5099         ${ECHO} "  ERROR: Remove of ${PROXY_ACI_NAME} ACI failed!"
5100         cat ${TMPDIR}/proxy_delete
5101         cleanup
5102         exit 1
5103     fi
5104
5105     # Display message that ACI is updated.
5106     MSG="Removed ${PROXY_ACI_NAME} ACI for proxyagent read permission for password."
5107     ${ECHO} " "
5108     ${ECHO} "  ACI REMOVED: $MSG"
5109     ${ECHO} "  The ACI removed is $proxy_aci"
5110     ${ECHO} " "
5111 }
5112
5113 #
5114 # add_profile(): Add client profile to server.
5115 #
5116 add_profile()
5117 {
5118     [ $DEBUG -eq 1 ] && ${ECHO} "In add_profile()"
5119
5120     # If profile name already exists, DELETE it, and add new one.
5121     eval "${LDAPSEARCH} ${LDAP_ARGS} -b \"cn=${LDAP_PROFILE_NAME},ou=profile,${LDAP_BASEDN}\" -s base \"objectclass=*\" ${VERB}"
5122     if [ $? -eq 0 ]; then
5123         # Create Delete file.
5124         ( cat <<EOF
5125 cn=${LDAP_PROFILE_NAME},ou=profile,${LDAP_BASEDN}
5126 EOF
5127 ) > ${TMPDIR}/del_profile
5128
5129         # Check if DEL_OLD_PROFILE is set.  (If not ERROR)
5130         if [ $DEL_OLD_PROFILE -eq 0 ]; then
5131             ${ECHO} "ERROR: Profile name ${LDAP_PROFILE_NAME} exists! Add failed!"
5132             exit 1
5133         fi
5134
5135         # Delete the OLD profile.
5136         ${EVAL} "${LDAPDELETE} ${LDAP_ARGS} -f ${TMPDIR}/del_profile ${VERB}"
5137         if [ $? -ne 0 ]; then
5138             ${ECHO} "  ERROR: Attempt to DELETE profile failed!"
5139             cleanup
5140             exit 1
5141         fi
5142     fi
5143
5144     # Build the "ldapclient genprofile" command string to execute.
5145     GEN_CMD="ldapclient genprofile -a \"profileName=${LDAP_PROFILE_NAME}\""
5146
5147     # Add required argument defaultSearchBase.
5148     GEN_CMD="${GEN_CMD} -a \"defaultSearchBase=${LDAP_BASEDN}\""
5149
5150     # Add optional parameters.
5151     [ -n "$LDAP_SERVER_LIST" ] && \
5152         GEN_CMD="${GEN_CMD} -a \"defaultServerList=${LDAP_SERVER_LIST}\""
5153     [ -n "$LDAP_SEARCH_SCOPE" ] && \
5154         GEN_CMD="${GEN_CMD} -a \"defaultSearchScope=${LDAP_SEARCH_SCOPE}\""
5155     [ -n "$LDAP_CRED_LEVEL" ] && \
5156         GEN_CMD="${GEN_CMD} -a \"credentialLevel=${LDAP_CRED_LEVEL}\""
5157     [ -n "$LDAP_AUTHMETHOD" ] && \
5158         GEN_CMD="${GEN_CMD} -a \"authenticationMethod=${LDAP_AUTHMETHOD}\""
5159     [ -n "$LDAP_FOLLOWREF" ] && \
5160         GEN_CMD="${GEN_CMD} -a \"followReferrals=${LDAP_FOLLOWREF}\""
5161     [ -n "$LDAP_SEARCH_TIME_LIMIT" ] && \
5162         GEN_CMD="${GEN_CMD} -a \"searchTimeLimit=${LDAP_SEARCH_TIME_LIMIT}\""
5163     [ -n "$LDAP_PROFILE_TTL" ] && \
5164         GEN_CMD="${GEN_CMD} -a \"profileTTL=${LDAP_PROFILE_TTL}\""
5165     [ -n "$LDAP_BIND_LIMIT" ] && \
5166         GEN_CMD="${GEN_CMD} -a \"bindTimeLimit=${LDAP_BIND_LIMIT}\""
5167     [ -n "$LDAP_PREF_SRVLIST" ] && \
5168         GEN_CMD="${GEN_CMD} -a \"preferredServerList=${LDAP_PREF_SRVLIST}\""
5169     [ -n "$LDAP_SRV_AUTHMETHOD_PAM" ] && \
5170         GEN_CMD="${GEN_CMD} -a \"serviceAuthenticationMethod=${LDAP_SRV_AUTHMETHOD_PAM}\""
5171     [ -n "$LDAP_SRV_AUTHMETHOD_KEY" ] && \
5172         GEN_CMD="${GEN_CMD} -a \"serviceAuthenticationMethod=${LDAP_SRV_AUTHMETHOD_KEY}\""
5173     [ -n "$LDAP_SRV_AUTHMETHOD_CMD" ] && \
5174         GEN_CMD="${GEN_CMD} -a \"serviceAuthenticationMethod=${LDAP_SRV_AUTHMETHOD_CMD}\""
5175
5176     # Check if there are any service search descriptors to ad.
5177     if [ -s "${SSD_FILE}" ]; then
5178         ssd_2_profile
5179     fi
5180
5181     # Execute "ldapclient genprofile" to create profile.
5182     eval ${GEN_CMD} > ${TMPDIR}/gen_profile 2> ${TMPDIR}/gen_profile_ERR
5183     if [ $? -ne 0 ]; then
5184         ${ECHO} "  ERROR: ldapclient genprofile failed!"
5185         cleanup
5186         exit 1
5187     fi
5188
5189     # Add the generated profile..
5190     ${EVAL} "${LDAPMODIFY} -a ${LDAP_ARGS} -f ${TMPDIR}/gen_profile ${VERB}"
5191     if [ $? -ne 0 ]; then
5192         ${ECHO} "  ERROR: Attempt to add profile failed!"
5193         cleanup
5194         exit 1
5195     fi
5196
5197     # Display message that schema is updated.
5198     ${ECHO} "  ${STEP}. Generated client profile and loaded on server."
5199     STEP=`expr $STEP + 1`
5200 }
5201
5202
5203 #
5204 # cleanup(): Remove the TMPDIR and all files in it.
5205 #
5206 cleanup()
5207 {
5208     [ $DEBUG -eq 1 ] && ${ECHO} "In cleanup()"
5209
5210     rm -fr ${TMPDIR}
5211 }
5212
5213
5214 #
5215 #                       * * * MAIN * * *
5216 #
5217 # Description:
5218 # This script assumes that the iPlanet Directory Server (iDS) is
5219 # installed and that setup has been run.  This script takes the
5220 # iDS server from that point and sets up the infrastructure for
5221 # LDAP Naming Services.  After running this script, ldapaddent(1M)
5222 # or some other tools can be used to populate data.
5223
5224 # Initialize the variables that need to be set to NULL, or some
5225 # other initial value before the rest of the functions can be called.
5226 init
5227
5228 # Parse command line arguments.
5229 parse_arg $*
5230 shift $?
5231
5232 # Print extra line to separate from prompt.
5233 ${ECHO} " "
5234
5235 # Either Load the user specified config file
5236 # or prompt user for config info.
5237 if [ -n "$INPUT_FILE" ]
5238 then
5239     load_config_file
5240     INTERACTIVE=0      # Turns off prompts that occur later.
5241     validate_info      # Validate basic info in file.
5242     chk_ids_version    # Check iDS version for compatibility.
5243 else
5244     # Display BACKUP warning to user.
5245     display_msg backup_server
5246     get_confirm "Do you wish to continue with server setup (y/n/h)?" "n" "backup_help"
5247     if [ $? -eq 0 ]; then    # if No, cleanup and exit.
5248         cleanup ; exit 1
5249     fi
5250
5251     # Prompt for values.
5252     prompt_config_info
5253     display_summary    # Allow user to modify results.
5254     INTERACTIVE=1      # Insures future prompting.
5255 fi
5256
5257 # Modify slapd.oc.conf to ALLOW cn instead of REQUIRE.
5258 modify_cn
5259
5260 # Modify timelimit to user value.
5261 [ $NEED_TIME -eq 1 ] && modify_timelimit
5262
5263 # Modify sizelimit to user value.
5264 [ $NEED_SIZE -eq 1 ] && modify_sizelimit
5265
5266 # Modify the password storage scheme to support CRYPT.
5267 if [ "$NEED_CRYPT" = "TRUE" ]; then
5268     modify_pwd_crypt
5269 fi
5270
5271 # Update the schema (Attributes, Objectclass Definitions)
5272 if [ ${SCHEMA_UPDATED} -eq 0 ]; then
5273         update_schema_attr
5274         update_schema_obj
5275 fi
5276
5277 # Add suffix together with its root entry (if needed)
5278 add_suffix ||
5279 {
5280         cleanup
5281         exit 1
5282 }
5283
5284 # Add base objects (if needed)
5285 add_base_objects
5286
5287 # Update the NisDomainObject.
5288 #   The Base DN might of just been created, so this MUST happen after
5289 #   the base objects have been added!
5290 set_nisdomain
5291
5292 # Add top level classes (new containers)
5293 add_new_containers
5294
5295 # Add common nismaps.
5296 add_auto_maps
5297
5298 # Modify top ACI.
5299 modify_top_aci
5300
5301 # Add Access Control Information for VLV.
5302 add_vlv_aci
5303
5304 # if Proxy needed, Add Proxy Agent and give read permission for password.
5305 if [ $NEED_PROXY -eq 1 ]; then
5306     add_proxyagent
5307     if [ "$LDAP_ENABLE_SHADOW_UPDATE" != "TRUE" ]; then
5308         allow_proxy_read_pw
5309     fi
5310 fi
5311
5312 # If admin needed for shadow update, Add the administrator identity and
5313 # give read/write permission for shadow, and deny all others read/write
5314 # access to it.
5315 if [ $NEED_ADMIN -eq 1 ]; then
5316     add_admin
5317     allow_admin_read_write_shadow
5318     # deny non-admin access to shadow data
5319     deny_non_admin_shadow_access
5320 fi
5321
5322 if [ $GSSAPI_ENABLE -eq 1 ]; then
5323     add_id_mapping_rules
5324     # do not modify ACI if "sasl/GSSAPI" and "self" are not selected
5325     if [ "$LDAP_CRED_LEVEL" = "self" -a "$LDAP_AUTHMETHOD" = "sasl/GSSAPI" ]; then
5326         modify_userpassword_acl_for_gssapi
5327     else
5328         ${ECHO} "  ACL for GSSAPI was not set because of incompatibility in profile."
5329     fi
5330 fi
5331
5332 # If use host principal for shadow update, give read/write permission for
5333 # shadow, and deny all others' read/write access to it.
5334 if [ $NEED_HOSTACL -eq 1 ]; then
5335     allow_host_read_write_shadow
5336     # deny non-host access to shadow data
5337     deny_non_host_shadow_access
5338 fi
5339
5340
5341 # Generate client profile and add it to the server.
5342 add_profile
5343
5344 # Add Indexes to improve Search Performance.
5345 add_eq_indexes
5346 add_sub_indexes
5347 add_vlv_indexes
5348
5349 # Display setup complete message
5350 display_msg setup_complete
5351
5352 # Display VLV index commands to be executed on server.
5353 display_vlv_cmds
5354
5355 # Create config file if requested.
5356 [ -n "$OUTPUT_FILE" ] && create_config_file
5357
5358 # Removed the TMPDIR and all files in it.
5359 cleanup
5360
5361 exit 0
5362 # end of MAIN.