usr/src/cmd/kbd/kbd.c

   1 /*
   2  * CDDL HEADER START
   3  *
   4  * The contents of this file are subject to the terms of the
   5  * Common Development and Distribution License (the "License").
   6  * You may not use this file except in compliance with the License.
   7  *
   8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
   9  * or http://www.opensolaris.org/os/licensing.
  10  * See the License for the specific language governing permissions
  11  * and limitations under the License.
  12  *
  13  * When distributing Covered Code, include this CDDL HEADER in each
  14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  15  * If applicable, add the following below this CDDL HEADER, with the
  16  * fields enclosed by brackets "[]" replaced with your own identifying
  17  * information: Portions Copyright [yyyy] [name of copyright owner]
  18  *
  19  * CDDL HEADER END
  20  */
  21
  22 /*
  23  * Copyright (c) 1991, 2010, Oracle and/or its affiliates. All rights reserved.
  24  */
  25
  26 /*
  27  *      Usage: kbd [-r] [-t] [-l] [-c on|off] [-a enable|disable|alternate]
  28  *                 [-d keyboard device] [-D autorepeat dealy] [-R autorepeat
  29  *                 rate]
  30  *             kbd [-i] [-d keyboard device]
  31  *             kbd -s [language]
  32  *             kbd -b [keyboard|console] frequency
  33  *      -r                      reset the keyboard as if power-up
  34  *      -t                      return the type of the keyboard being used
  35  *      -l                      return the layout of the keyboard being used,
  36  *                              and the Autorepeat settings
  37  *      -i                      read in the default configuration file
  38  *      -c on|off               turn on|off clicking
  39  *      -a enable|disable|alternate     sets abort sequence
  40  *      -D autorepeat delay     sets autorepeat dealy, unit in ms
  41  *      -R autorepeat rate      sets autorepeat rate, unit in ms
  42  *      -d keyboard device      chooses the kbd device, default /dev/kbd.
  43  *      -s keyboard layout      sets keyboard layout
  44  *      -b [keyboard| console]  frequency
  45  *                              sets keyboard or console beeper frequency
  46  */
  47
  48 #include <sys/types.h>
  49 #include <sys/ioctl.h>
  50 #include <sys/kbio.h>
  51 #include <sys/kbd.h>
  52 #include <stdio.h>
  53 #include <fcntl.h>
  54 #include <deflt.h>
  55 #include <unistd.h>
  56 #include <string.h>
  57 #include <stdlib.h>
  58 #include <stropts.h>
  59 #include <libintl.h>
  60 #include <locale.h>
  61 #include <errno.h>
  62 #include <inttypes.h>
  63 #include <libscf.h>
  64
  65 #define KBD_DEVICE      "/dev/kbd"              /* default keyboard device */
  66
  67 #define KBD_LAYOUT_FILE  "/usr/share/lib/keytables/type_6/kbd_layouts"
  68 #define MAX_LAYOUT_NUM          128
  69 #define MAX_LINE_SIZE           256
  70 #define DEFAULT_KBD_LAYOUT      33
  71
  72 #define KBD_FMRI                "svc:/system/keymap:default"
  73 #define KBD_PG                  "keymap"
  74 #define KBD_PROP_LAYOUT         "layout"
  75 #define KBD_PROP_KEYCLICK       "keyclick"
  76 #define KBD_PROP_KEYBOARD_ABORT "keyboard_abort"
  77 #define KBD_PROP_RPTDELAY       "repeat_delay"
  78 #define KBD_PROP_RPTRATE        "repeat_rate"
  79 #define KBD_PROP_FREQ           "kbd_beeper_freq"
  80 #define KBD_PROP_CONSFREQ       "console_beeper_freq"
  81 #define KBD_MAX_NAME_LEN        1024
  82
  83 char *layout_names[MAX_LAYOUT_NUM];
  84 int layout_numbers[MAX_LAYOUT_NUM];
  85 static int layout_count;
  86 static int default_layout_number = 0;
  87
  88 static void reset(int);
  89 static int get_type(int);
  90 static void get_layout(int);
  91 static void kbd_defaults(int);
  92 static void usage(void);
  93
  94 static int click(char *, int);
  95 static int abort_enable(char *, int);
  96 static int set_repeat_delay(char *, int);
  97 static int set_rptdelay(int, int);
  98 static int set_repeat_rate(char *, int);
  99 static int set_rptrate(int, int);
 100
 101 static int get_layout_number(char *);
 102 static int set_layout(int, int);
 103 static int get_layouts(void);
 104 static int set_kbd_layout(int, char *);
 105 static int set_beep_freq(int, char *, int);
 106
 107 int
 108 main(int argc, char **argv)
 109 {
 110         int c, error;
 111         int rflag, tflag, lflag, cflag, dflag, aflag, iflag, errflag,
 112             Dflag, Rflag, rtlacDRflag, sflag, bflag;
 113         char *copt, *aopt, *delay, *rate, *layout_name, *b_type, *freq_str;
 114         char *kbdname = KBD_DEVICE, *endptr = NULL;
 115         int kbd, freq_val;
 116         extern char *optarg;
 117         extern int optind;
 118
 119         rflag = tflag = cflag = dflag = aflag = iflag = errflag = lflag =
 120             Dflag = Rflag = sflag = bflag = 0;
 121         copt = aopt = (char *)0;
 122
 123         (void) setlocale(LC_ALL, "");
 124 #if !defined(TEXT_DOMAIN)
 125 #define TEXT_DOMAIN     "SYS_TEST"
 126 #endif
 127         (void) textdomain(TEXT_DOMAIN);
 128
 129         while ((c = getopt(argc, argv, "rtlisc:a:d:D:R:b:")) != EOF) {
 130                 switch (c) {
 131                 case 'r':
 132                         rflag++;
 133                         break;
 134                 case 't':
 135                         tflag++;
 136                         break;
 137                 case 'l':
 138                         lflag++;
 139                         break;
 140                 case 'i':
 141                         iflag++;
 142                         break;
 143                 case 's':
 144                         sflag++;
 145                         break;
 146                 case 'c':
 147                         copt = optarg;
 148                         cflag++;
 149                         break;
 150                 case 'a':
 151                         aopt = optarg;
 152                         aflag++;
 153                         break;
 154                 case 'd':
 155                         kbdname = optarg;
 156                         dflag++;
 157                         break;
 158                 case 'D':
 159                         delay = optarg;
 160                         Dflag++;
 161                         break;
 162                 case 'R':
 163                         rate = optarg;
 164                         Rflag++;
 165                         break;
 166                 case 'b':
 167                         bflag++;
 168                         break;
 169                 case '?':
 170                         errflag++;
 171                         break;
 172                 }
 173         }
 174
 175         /*
 176          * Check for valid arguments:
 177          *
 178          * If argument parsing failed or if there are left-over
 179          * command line arguments(except -s and -b option),
 180          * then we're done now.
 181          */
 182         if (errflag != 0 || (sflag == 0 && bflag == 0 && argc != optind)) {
 183                 usage();
 184                 exit(1);
 185         }
 186
 187         /*
 188          * kbd requires that the user specify either "-i" or "-s" or "-b" or
 189          * at least one of -[rtlacDR].  The "-d" option is, well, optional.
 190          * We don't care if it's there or not.
 191          */
 192         rtlacDRflag = rflag + tflag + lflag + aflag + cflag + Dflag + Rflag;
 193         if (!((iflag != 0 && sflag == 0 && bflag == 0 && rtlacDRflag == 0) ||
 194             (iflag == 0 && sflag != 0 && bflag == 0 && dflag == 0 &&
 195             rtlacDRflag == 0) ||
 196             (iflag == 0 && sflag == 0 && bflag == 0 && rtlacDRflag != 0) ||
 197             (iflag == 0 && sflag == 0 && bflag != 0 && rtlacDRflag == 0))) {
 198                 usage();
 199                 exit(1);
 200         }
 201
 202         if (Dflag && atoi(delay) <= 0) {
 203                 (void) fprintf(stderr, "Invalid arguments: -D %s\n", delay);
 204                 usage();
 205                 exit(1);
 206         }
 207
 208         if (Rflag && atoi(rate) <= 0) {
 209                 (void) fprintf(stderr, "Invalid arguments: -R %s\n", rate);
 210                 usage();
 211                 exit(1);
 212         }
 213
 214         /*
 215          * Open the keyboard device
 216          */
 217         if ((kbd = open(kbdname, O_RDWR)) < 0) {
 218                 perror("opening the keyboard");
 219                 (void) fprintf(stderr, "kbd: Cannot open %s\n", kbdname);
 220                 exit(1);
 221         }
 222
 223         if (iflag) {
 224                 kbd_defaults(kbd);
 225                 exit(0);        /* A mutually exclusive option */
 226                 /*NOTREACHED*/
 227         }
 228
 229         if (tflag)
 230                 (void) get_type(kbd);
 231
 232         if (lflag)
 233                 get_layout(kbd);
 234
 235         if (cflag && (error = click(copt, kbd)) != 0)
 236                 exit(error);
 237
 238         if (rflag)
 239                 reset(kbd);
 240
 241         if (aflag && (error = abort_enable(aopt, kbd)) != 0)
 242                 exit(error);
 243
 244         if (Dflag && (error = set_repeat_delay(delay, kbd)) != 0)
 245                 exit(error);
 246
 247         if (Rflag && (error = set_repeat_rate(rate, kbd)) != 0)
 248                 exit(error);
 249
 250         if (sflag) {
 251                 if (argc == optind) {
 252                         layout_name = NULL;
 253                 } else if (argc == (optind + 1)) {
 254                         layout_name = argv[optind];
 255                 } else {
 256                         usage();
 257                         exit(1);
 258                 }
 259
 260                 if ((error = set_kbd_layout(kbd, layout_name)) != 0)
 261                         exit(error);
 262         }
 263
 264         if (bflag) {
 265                 if (argc == optind) {
 266                         b_type = "keyboard";
 267                 } else if (argc == (optind + 1)) {
 268                         b_type = argv[argc - 2];
 269                 } else {
 270                         usage();
 271                         exit(1);
 272                 }
 273
 274                 if (strcmp(b_type, "keyboard") && strcmp(b_type, "console")) {
 275                         usage();
 276                         exit(1);
 277                 }
 278
 279                 freq_str = argv[argc - 1];
 280                 errno = 0;
 281                 freq_val = (int)strtol(freq_str, &endptr, 10);
 282                 if (errno != 0 || endptr[0] != '\0') {
 283                         usage();
 284                         exit(1);
 285                 }
 286
 287                 if (freq_val < 0 || freq_val > INT16_MAX) {
 288                         (void) fprintf(stderr, "Invalid arguments: -b %s\n",
 289                             freq_str);
 290                         (void) fprintf(stderr, "Frequency range: [0 - %d]\n",
 291                             INT16_MAX);
 292                         exit(1);
 293                 }
 294
 295                 if ((error = set_beep_freq(kbd, b_type, freq_val)) != 0)
 296                         exit(1);
 297         }
 298
 299         return (0);
 300 }
 301
 302 /*
 303  * this routine gets the type of the keyboard being used
 304  */
 305 static int
 306 set_kbd_layout(int kbd, char *layout_name)
 307 {
 308         int layout_num;
 309         int error = 1;
 310
 311         /* layout setting is possible only for USB type keyboards */
 312         if (get_type(kbd) != KB_USB) {
 313                 (void) fprintf(stderr, "The -s option does not apply for this"
 314                     " keyboard type.\n"
 315                     "Only USB/PS2 type keyboards support this option.\n");
 316                 return (error);
 317         }
 318
 319         /* get the language info from the layouts file */
 320         if (get_layouts() != 0)
 321                 return (error);
 322
 323         if (layout_name != NULL) {
 324                 if ((layout_num = get_layout_number(layout_name)) == -1) {
 325                         (void) fprintf(stderr, "%s: unknown layout name\n"
 326                             "Please refer to 'kbd -s' to get the "
 327                             "supported layouts.\n", layout_name);
 328                         return (error);
 329                 }
 330         } else {
 331                         int i, j, print_cnt, input_num;
 332                         boolean_t input_right = B_TRUE;
 333                         boolean_t default_input = B_FALSE;
 334                         char input[8]; /* 8 chars is enough for numbers */
 335
 336                         print_cnt = (layout_count % 2) ?
 337                             layout_count/2+1 : layout_count/2;
 338
 339                         for (i = 1; i <= print_cnt; i++) {
 340                                 (void) printf("%2d. %-30s", i,
 341                                     layout_names[i-1]);
 342                                 j = i + print_cnt;
 343                                 if (j <= layout_count) {
 344                                         (void) printf("%-2d. %-30s\n", j,
 345                                             layout_names[j-1]);
 346                                 }
 347                         }
 348                         (void) printf(gettext("\nTo select the keyboard layout,"
 349                             " enter a number [default %d]:"),
 350                             default_layout_number+1);
 351
 352                         for (;;) {
 353                                 if (input_right == B_FALSE)
 354                                         (void) printf(gettext("Invalid input. "
 355                                             "Please input a number "
 356                                             "(1,2,...):"));
 357                                 (void) memset(input, 0, 8);
 358                                 (void) fflush(stdin);
 359                                 (void) fgets(input, 8, stdin);
 360                                 if (strlen(input) > 4) {
 361                                         input_right = B_FALSE;
 362                                         continue;
 363                                 }
 364                                 if (input[0] == '\n') {
 365                                         default_input = B_TRUE;
 366                                         break;
 367                                 }
 368                                 input_right = B_TRUE;
 369                                 /* check if the inputs are numbers 0~9 */
 370                                 for (i = 0; i < (strlen(input) - 1); i++) {
 371                                         if ((input[i] < '0') ||
 372                                             (input[i] > '9')) {
 373                                                 input_right = B_FALSE;
 374                                                 break;
 375                                         }
 376                                 }
 377                                 if (input_right == B_FALSE)
 378                                         continue;
 379                                 input_num = atoi(input);
 380                                 if ((input_num > 0) &&
 381                                     (input_num <= layout_count))
 382                                         break;
 383                                 else
 384                                         input_right = B_FALSE;
 385                         }
 386                         if (default_input == B_TRUE)
 387                                 layout_num = DEFAULT_KBD_LAYOUT;
 388                         else
 389                                 layout_num = layout_numbers[--input_num];
 390         }
 391
 392         if ((error = set_layout(kbd, layout_num)) != 0)
 393                 return (error);
 394
 395         return (0);
 396 }
 397
 398 /*
 399  * This routine sets keyboard or console beeper frequency
 400  */
 401 static int
 402 set_beep_freq(int fd, char *type, int freq)
 403 {
 404         struct freq_request fr_struct;
 405
 406         if (strcmp(type, "keyboard") == 0)
 407                 fr_struct.type = KBD_BEEP;
 408         else if (strcmp(type, "console") == 0)
 409                 fr_struct.type = CONSOLE_BEEP;
 410         else
 411                 return (EINVAL);
 412
 413         fr_struct.freq = (int16_t)freq;
 414
 415         return (ioctl(fd, KIOCSETFREQ, &fr_struct));
 416 }
 417
 418 /*
 419  * this routine resets the state of the keyboard as if power-up
 420  */
 421 static void
 422 reset(int kbd)
 423 {
 424         int cmd;
 425
 426         cmd = KBD_CMD_RESET;
 427
 428         if (ioctl(kbd, KIOCCMD, &cmd)) {
 429                 perror("kbd: ioctl error");
 430                 exit(1);
 431         }
 432
 433 }
 434
 435 /*
 436  * this routine gets the type of the keyboard being used
 437  */
 438 static int
 439 get_type(int kbd)
 440 {
 441         int kbd_type;
 442
 443         if (ioctl(kbd, KIOCTYPE, &kbd_type)) {
 444                 perror("ioctl (kbd type)");
 445                 exit(1);
 446         }
 447
 448         switch (kbd_type) {
 449
 450         case KB_SUN3:
 451                 (void) printf("Type 3 Sun keyboard\n");
 452                 break;
 453
 454         case KB_SUN4:
 455                 (void) printf("Type 4 Sun keyboard\n");
 456                 break;
 457
 458         case KB_ASCII:
 459                 (void) printf("ASCII\n");
 460                 break;
 461
 462         case KB_PC:
 463                 (void) printf("PC\n");
 464                 break;
 465
 466         case KB_USB:
 467                 (void) printf("USB keyboard\n");
 468                 break;
 469
 470         default:
 471                 (void) printf("Unknown keyboard type\n");
 472                 break;
 473         }
 474         return (kbd_type);
 475 }
 476
 477 /*
 478  * this routine gets the layout of the keyboard being used
 479  * also, included the autorepeat delay and rate being used
 480  */
 481 static void
 482 get_layout(int kbd)
 483 {
 484         int kbd_type;
 485         int kbd_layout;
 486         /* these two variables are used for getting delay&rate */
 487         int delay, rate;
 488         delay = rate = 0;
 489
 490         if (ioctl(kbd, KIOCTYPE, &kbd_type)) {
 491                 perror("ioctl (kbd type)");
 492                 exit(1);
 493         }
 494
 495         if (ioctl(kbd, KIOCLAYOUT, &kbd_layout)) {
 496                 perror("ioctl (kbd layout)");
 497                 exit(1);
 498         }
 499
 500         (void) printf("type=%d\nlayout=%d (0x%.2x)\n",
 501             kbd_type, kbd_layout, kbd_layout);
 502
 503         /* below code is used to get the autorepeat delay and rate */
 504         if (ioctl(kbd, KIOCGRPTDELAY, &delay)) {
 505                 perror("ioctl (kbd get repeat delay)");
 506                 exit(1);
 507         }
 508
 509         if (ioctl(kbd, KIOCGRPTRATE, &rate)) {
 510                 perror("ioctl (kbd get repeat rate)");
 511                 exit(1);
 512         }
 513
 514         (void) printf("delay(ms)=%d\n", delay);
 515         (void) printf("rate(ms)=%d\n", rate);
 516 }
 517
 518 /*
 519  * this routine enables or disables clicking of the keyboard
 520  */
 521 static int
 522 click(char *copt, int kbd)
 523 {
 524         int cmd;
 525
 526         if (strcmp(copt, "on") == 0)
 527                 cmd = KBD_CMD_CLICK;
 528         else if (strcmp(copt, "off") == 0)
 529                 cmd = KBD_CMD_NOCLICK;
 530         else {
 531                 (void) fprintf(stderr, "wrong option -- %s\n", copt);
 532                 usage();
 533                 return (1);
 534         }
 535
 536         if (ioctl(kbd, KIOCCMD, &cmd)) {
 537                 perror("kbd ioctl (keyclick)");
 538                 return (1);
 539         }
 540         return (0);
 541 }
 542
 543 /*
 544  * this routine enables/disables/sets BRK or abort sequence feature
 545  */
 546 static int
 547 abort_enable(char *aopt, int kbd)
 548 {
 549         int enable;
 550
 551         if (strcmp(aopt, "alternate") == 0)
 552                 enable = KIOCABORTALTERNATE;
 553         else if (strcmp(aopt, "enable") == 0)
 554                 enable = KIOCABORTENABLE;
 555         else if (strcmp(aopt, "disable") == 0)
 556                 enable = KIOCABORTDISABLE;
 557         else {
 558                 (void) fprintf(stderr, "wrong option -- %s\n", aopt);
 559                 usage();
 560                 return (1);
 561         }
 562
 563         if (ioctl(kbd, KIOCSKABORTEN, &enable)) {
 564                 perror("kbd ioctl (abort enable)");
 565                 return (1);
 566         }
 567         return (0);
 568 }
 569
 570 static int
 571 set_rptdelay(int delay, int kbd)
 572 {
 573         /*
 574          * The error message depends on the different inputs.
 575          * a. the input is a invalid integer(unit in ms)
 576          * b. the input is a integer less than the minimal delay setting.
 577          * The condition (a) has been covered by main function and kbd_defaults
 578          * function.
 579          */
 580         if (ioctl(kbd, KIOCSRPTDELAY, &delay) == -1) {
 581                 if (delay < KIOCRPTDELAY_MIN)
 582                         (void) fprintf(stderr, "kbd: specified delay %d is "
 583                             "less than minimum %d\n", delay, KIOCRPTDELAY_MIN);
 584                 else
 585                         perror("kbd: set repeat delay");
 586                 return (1);
 587         }
 588
 589         return (0);
 590 }
 591
 592 /*
 593  * this routine set autorepeat delay
 594  */
 595 static int
 596 set_repeat_delay(char *delay_str, int kbd)
 597 {
 598         int delay = atoi(delay_str);
 599
 600         return (set_rptdelay(delay, kbd));
 601 }
 602
 603 static int
 604 set_rptrate(int rate, int kbd)
 605 {
 606         /*
 607          * The input validation check has been covered by main function
 608          * and kbd_defaults function.Here just give an error message if
 609          * the ioctl fails.
 610          */
 611         if (ioctl(kbd, KIOCSRPTRATE, &rate) == -1) {
 612                 perror("kbd: set repeat rate");
 613                 return (1);
 614         }
 615         return (0);
 616 }
 617
 618 /*
 619  * this routine set autorepeat rate
 620  */
 621 static int
 622 set_repeat_rate(char *rate_str, int kbd)
 623 {
 624         int rate = atoi(rate_str);
 625
 626         return (set_rptrate(rate, kbd));
 627 }
 628
 629 #define BAD_DEFAULT_STR         "kbd: bad default value for %s: %s\n"
 630 #define BAD_DEFAULT_INT         "kbd: bad default value for %s: %d\n"
 631 #define BAD_DEFAULT_LLINT       "kbd: bad default value for %s: %lld\n"
 632
 633 static void
 634 kbd_defaults(int kbd)
 635 {
 636         scf_handle_t *h = NULL;
 637         scf_snapshot_t *snap = NULL;
 638         scf_instance_t *inst = NULL;
 639         scf_propertygroup_t *pg = NULL;
 640         scf_property_t *prop = NULL;
 641         scf_value_t *val = NULL;
 642
 643         int layout_num;
 644         char *val_layout = NULL, *val_abort = NULL;
 645         uint8_t val_click;
 646         int64_t val_delay, val_rate;
 647         int64_t val_kbd_beeper, val_console_beeper;
 648
 649         if ((h = scf_handle_create(SCF_VERSION)) == NULL ||
 650             scf_handle_bind(h) != 0 ||
 651             (inst = scf_instance_create(h)) == NULL ||
 652             (snap = scf_snapshot_create(h)) == NULL ||
 653             (pg = scf_pg_create(h)) == NULL ||
 654             (prop = scf_property_create(h)) == NULL ||
 655             (val = scf_value_create(h)) == NULL) {
 656                 goto out;
 657         }
 658
 659         if (scf_handle_decode_fmri(h, KBD_FMRI, NULL, NULL, inst,
 660             NULL, NULL, SCF_DECODE_FMRI_REQUIRE_INSTANCE) != 0) {
 661                 goto out;
 662         }
 663
 664         if (scf_instance_get_snapshot(inst, "running", snap) != 0) {
 665                 scf_snapshot_destroy(snap);
 666                 snap = NULL;
 667         }
 668
 669         if (scf_instance_get_pg_composed(inst, snap, KBD_PG, pg) != 0) {
 670                 goto out;
 671         }
 672
 673         if ((val_abort = malloc(KBD_MAX_NAME_LEN)) == NULL) {
 674                 (void) fprintf(stderr,
 675                     "Can not alloc memory for keyboard properties\n");
 676                 goto out;
 677         }
 678
 679         if ((val_layout = malloc(KBD_MAX_NAME_LEN)) == NULL) {
 680                 (void) fprintf(stderr,
 681                     "Can not alloc memory for keyboard properties\n");
 682                 goto out;
 683         }
 684
 685         if (scf_pg_get_property(pg, KBD_PROP_KEYCLICK, prop) != 0 ||
 686             scf_property_get_value(prop, val) != 0 ||
 687             scf_value_get_boolean(val, &val_click) == -1) {
 688                 (void) fprintf(stderr, "Can not get KEYCLICK\n");
 689         }
 690
 691         if (val_click == 1)
 692                 (void) click("on", kbd);
 693         else if (val_click == 0)
 694                 (void) click("off", kbd);
 695         else
 696                 (void) fprintf(stderr,
 697                     BAD_DEFAULT_INT, KBD_PROP_KEYCLICK, val_click);
 698
 699         if (scf_pg_get_property(pg, KBD_PROP_KEYBOARD_ABORT, prop) != 0 ||
 700             scf_property_get_value(prop, val) != 0 ||
 701             scf_value_get_astring(val, val_abort, KBD_MAX_NAME_LEN) == -1) {
 702                 (void) fprintf(stderr, "Can not get KEYBOARD_ABORT\n");
 703         }
 704
 705         if (*val_abort != '\0') {
 706                 /*
 707                  * ABORT must equal "enable", "disable" or "alternate"
 708                  */
 709                 if ((strcmp(val_abort, "enable") == 0) ||
 710                     (strcmp(val_abort, "alternate") == 0) ||
 711                     (strcmp(val_abort, "disable") == 0))
 712                         (void) abort_enable(val_abort, kbd);
 713                 else
 714                         (void) fprintf(stderr, BAD_DEFAULT_STR,
 715                             KBD_PROP_KEYBOARD_ABORT, val_abort);
 716         }
 717
 718         if (scf_pg_get_property(pg, KBD_PROP_RPTDELAY, prop) != 0 ||
 719             scf_property_get_value(prop, val) != 0 ||
 720             scf_value_get_integer(val, &val_delay) == -1) {
 721                 (void) fprintf(stderr, "Can not get RPTDELAY\n");
 722         }
 723
 724         if (val_delay > 0)
 725                 (void) set_rptdelay(val_delay, kbd);
 726         else
 727                 (void) fprintf(stderr,
 728                     BAD_DEFAULT_LLINT, KBD_PROP_RPTDELAY, val_delay);
 729
 730         if (scf_pg_get_property(pg, KBD_PROP_RPTRATE, prop) != 0 ||
 731             scf_property_get_value(prop, val) != 0 ||
 732             scf_value_get_integer(val, &val_rate) == -1) {
 733                 (void) fprintf(stderr, "Can not get RPTRATE\n");
 734         }
 735
 736         if (val_rate > 0)
 737                 (void) set_rptrate(val_rate, kbd);
 738         else
 739                 (void) fprintf(stderr,
 740                     BAD_DEFAULT_LLINT, KBD_PROP_RPTRATE, val_rate);
 741
 742         if (scf_pg_get_property(pg, KBD_PROP_LAYOUT, prop) != 0 ||
 743             scf_property_get_value(prop, val) != 0 ||
 744             scf_value_get_astring(val, val_layout, KBD_MAX_NAME_LEN) == -1) {
 745                 (void) fprintf(stderr, "Can not get LAYOUT\n");
 746         }
 747
 748         if (*val_layout != '\0') {
 749                 /*
 750                  * LAYOUT must be one of the layouts supported in kbd_layouts
 751                  */
 752                 if (get_layouts() != 0)
 753                         goto out;
 754
 755                 if ((layout_num = get_layout_number(val_layout)) == -1) {
 756                         (void) fprintf(stderr,
 757                             BAD_DEFAULT_STR, KBD_PROP_LAYOUT, val_layout);
 758                         goto out;
 759                 }
 760
 761                 (void) set_layout(kbd, layout_num);
 762         }
 763
 764         if (scf_pg_get_property(pg, KBD_PROP_FREQ, prop) != 0 ||
 765             scf_property_get_value(prop, val) != 0 ||
 766             scf_value_get_integer(val, &val_kbd_beeper) == -1) {
 767                 (void) fprintf(stderr, "Can not get FREQ\n");
 768         }
 769
 770         if (val_kbd_beeper >= 0 && val_kbd_beeper <= INT16_MAX)
 771                 (void) set_beep_freq(kbd, "keyboard", val_kbd_beeper);
 772         else
 773                 (void) fprintf(stderr,
 774                     BAD_DEFAULT_LLINT, KBD_PROP_FREQ, val_kbd_beeper);
 775
 776         if (scf_pg_get_property(pg, KBD_PROP_CONSFREQ, prop) != 0 ||
 777             scf_property_get_value(prop, val) != 0 ||
 778             scf_value_get_integer(val, &val_console_beeper) == -1) {
 779                 (void) fprintf(stderr, "Can not get CONSFREQ\n");
 780         }
 781
 782         if (val_console_beeper >= 0 && val_console_beeper <= INT16_MAX)
 783                 (void) set_beep_freq(kbd, "console", val_console_beeper);
 784         else
 785                 (void) fprintf(stderr,
 786                     BAD_DEFAULT_LLINT, KBD_PROP_CONSFREQ, val_console_beeper);
 787
 788 out:
 789         if (val_layout != NULL)
 790                 free(val_layout);
 791         if (val_abort != NULL)
 792                 free(val_abort);
 793         if (snap != NULL)
 794                 scf_snapshot_destroy(snap);
 795         scf_value_destroy(val);
 796         scf_property_destroy(prop);
 797         scf_pg_destroy(pg);
 798         scf_instance_destroy(inst);
 799         scf_handle_destroy(h);
 800 }
 801
 802 static int
 803 get_layout_number(char *layout)
 804 {
 805         int i;
 806         int layout_number = -1;
 807
 808         for (i = 0; i < layout_count; i ++) {
 809                 if (strcmp(layout, layout_names[i]) == 0) {
 810                         layout_number = layout_numbers[i];
 811                         break;
 812                 }
 813         }
 814
 815         return (layout_number);
 816 }
 817
 818 static int
 819 get_layouts()
 820 {
 821         FILE *stream;
 822         char buffer[MAX_LINE_SIZE];
 823         char *result = NULL;
 824         int  i = 0;
 825         char *tmpbuf;
 826
 827         if ((stream = fopen(KBD_LAYOUT_FILE, "r")) == 0) {
 828                 perror(KBD_LAYOUT_FILE);
 829                 return (1);
 830         }
 831
 832         while ((fgets(buffer, MAX_LINE_SIZE, stream) != NULL) &&
 833             (i < MAX_LAYOUT_NUM)) {
 834                 if (buffer[0] == '#')
 835                         continue;
 836                 if ((result = strtok(buffer, "=")) == NULL)
 837                         continue;
 838                 if ((tmpbuf = strdup(result)) != NULL) {
 839                         layout_names[i] = tmpbuf;
 840                 } else {
 841                         perror("out of memory getting layout names");
 842                         return (1);
 843                 }
 844                 if ((result = strtok(NULL, "\n")) == NULL)
 845                         continue;
 846                 layout_numbers[i] = atoi(result);
 847                 if (strcmp(tmpbuf, "US-English") == 0)
 848                         default_layout_number = i;
 849                 i++;
 850         }
 851         layout_count = i;
 852
 853         return (0);
 854 }
 855
 856 /*
 857  * this routine sets the layout of the keyboard being used
 858  */
 859 static int
 860 set_layout(int kbd, int layout_num)
 861 {
 862
 863         if (ioctl(kbd, KIOCSLAYOUT, layout_num)) {
 864                 perror("ioctl (set kbd layout)");
 865                 return (1);
 866         }
 867
 868         return (0);
 869 }
 870
 871 static char *usage1 = "kbd [-r] [-t] [-l] [-a enable|disable|alternate]";
 872 static char *usage2 = "    [-c on|off][-D delay][-R rate][-d keyboard device]";
 873 static char *usage3 = "kbd -i [-d keyboard device]";
 874 static char *usage4 = "kbd -s [language]";
 875 static char *usage5 = "kbd -b [keyboard|console] frequency";
 876
 877 static void
 878 usage(void)
 879 {
 880         (void) fprintf(stderr, "Usage:\t%s\n\t%s\n\t%s\n\t%s\n\t%s\n", usage1,
 881             usage2, usage3, usage4, usage5);
 882 }