uts: make emu10k non-verbose

[unleashed.git] / include / sys / ddidmareq.h

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2014 Garrett D'Amore <garrett@damore.org>
 *
 * Copyright (c) 1990, 2010, Oracle and/or its affiliates. All rights reserved.
 */

#ifndef _SYS_DDIDMAREQ_H
#define _SYS_DDIDMAREQ_H

#ifdef  __cplusplus
extern "C" {
#endif

/*
 * Memory Objects
 *
 * Definitions of structures that can describe
 * an object that can be mapped for DMA.
 */

/*
 * Structure describing a virtual address
 */
struct v_address {
        caddr_t         v_addr;         /* base virtual address */
        struct  as      *v_as;          /* pointer to address space */
        void            *v_priv;        /* priv data for shadow I/O */
};

/*
 * Structure describing a page-based address
 */
struct pp_address {
        /*
         * A pointer to a circularly linked list of page structures.
         */
        struct page *pp_pp;
        uint_t pp_offset;       /* offset within first page */
};

/*
 * Structure to describe a physical memory address.
 */
struct phy_address {
        ulong_t p_addr;         /* base physical address */
        ulong_t p_memtype;      /* memory type */
};

/*
 * Structure to describe an array DVMA addresses.
 * Under normal circumstances, dv_nseg will be 1.
 * dvs_start is always page aligned.
 */
struct dvma_address {
        size_t dv_off;
        size_t dv_nseg;
        struct dvmaseg {
                uint64_t dvs_start;
                size_t dvs_len;
        } *dv_seg;
};

/*
 * A union of all of the above structures.
 *
 * This union describes the relationship between
 * the kind of an address description and an object.
 */
typedef union {
        struct v_address virt_obj;      /* Some virtual address         */
        struct pp_address pp_obj;       /* Some page-based address      */
        struct phy_address phys_obj;    /* Some physical address        */
        struct dvma_address dvma_obj;
} ddi_dma_aobj_t;

/*
 * DMA object types - used to select how the object
 * being mapped is being addressed by the IU.
 */
typedef enum {
        DMA_OTYP_VADDR = 0,     /* enforce starting value of zero */
        DMA_OTYP_PAGES,
        DMA_OTYP_PADDR,
        DMA_OTYP_BUFVADDR,
        DMA_OTYP_DVADDR
} ddi_dma_atyp_t;

/*
 * A compact package to describe an object that is to be mapped for DMA.
 */
typedef struct {
        uint_t          dmao_size;      /* size, in bytes, of the object */
        ddi_dma_atyp_t  dmao_type;      /* type of object */
        ddi_dma_aobj_t  dmao_obj;       /* the object described */
} ddi_dma_obj_t;

/*
 * DMA addressing limits.
 *
 * This structure describes the constraints that a particular device's
 * DMA engine has to its parent so that the parent may correctly set
 * things up for a DMA mapping. Each parent may in turn modify the
 * constraints listed in a DMA request structure in order to describe
 * to its parent any changed or additional constraints. The rules
 * are that each parent may modify a constraint in order to further
 * constrain things (e.g., picking a more limited address range than
 * that permitted by the child), but that the parent may not ignore
 * a child's constraints.
 *
 * A particular constraint that we do *not* address is whether or not
 * a requested mapping is too large for a DMA engine's counter to
 * correctly track. It is still up to each driver to explicitly handle
 * transfers that are too large for its own hardware to deal with directly.
 *
 * The mapping routines that are cognizant of this structure will
 * copy any user defined limits structure if they need to modify
 * the fields (as alluded to above).
 *
 * A note as to how to define constraints:
 *
 * How you define the constraints for your device depends on how you
 * define your device. For example, you may have an SBus card with a
 * device on it that address only the bottom 16mb of virtual DMA space.
 * However, if the card also has ancillary circuitry that pulls the high 8
 * bits of address lines high, the more correct expression for your device
 * is that it address [0xff000000..0xffffffff] rather than [0..0x00ffffff].
 */
#if defined(__sparc)
typedef struct ddi_dma_lim {

        /*
         * Low range of 32 bit addressing capability.
         */
        uint_t  dlim_addr_lo;

        /*
         * Upper inclusive bound of addressing capability. It is an
         * inclusive boundary limit to allow for the addressing range
         * [0..0xffffffff] to be specified in preference to [0..0].
         */
        uint_t  dlim_addr_hi;

        /*
         * Inclusive upper bound with which The DMA engine's counter acts as
         * a register.
         *
         * This handles the case where an upper portion of a DMA address
         * register is a latch instead of being a full 32 bit register
         * (e.g., the upper 8 bits may remain constant while the lower
         * 24 bits are the real address register).
         *
         * This essentially gives a hint about segment limitations
         * to the mapping routines.
         */
        uint_t  dlim_cntr_max;

        /*
         * DMA burst sizes.
         *
         * At the time of a mapping request, this tag defines the possible
         * DMA burst cycle sizes that the requestor's DMA engine can
         * emit. The format of the data is binary encoding of burst sizes
         * assumed to be powers of two. That is, if a DMA engine is capable
         * of doing 1, 2, 4 and 16 byte transfers, the encoding would be 0x17.
         *
         * As the mapping request is handled by intervening nexi, the
         * burstsizes value may be modified. Prior to enabling DMA for
         * the specific device, the driver that owns the DMA engine should
         * check (via ddi_dma_burstsizes(9F)) what the allowed burstsizes
         * have become and program their DMA engine appropriately.
         */
        uint_t  dlim_burstsizes;

        /*
         * Minimum effective DMA transfer size, in units of bytes.
         *
         * This value specifies the minimum effective granularity of the
         * DMA engine. It is distinct from dlim_burtsizes in that it
         * describes the minimum amount of access a DMA transfer will
         * effect. dlim_burtsizes describes in what electrical fashion
         * the DMA engine might perform its accesses, while dlim_minxfer
         * describes the minimum amount of memory that can be touched by
         * the DMA transfer.
         *
         * As the mapping request is handled by intervening nexi, the
         * dlim_minxfer value may be modifed contingent upon the presence
         * (and use) of I/O caches and DMA write buffers in between the
         * DMA engine and the object that DMA is being performed on.
         *
         */
        uint_t  dlim_minxfer;

        /*
         * Expected average data rate for this DMA engine
         * while transferring data.
         *
         * This is used as a hint for a number of operations that might
         * want to know the possible optimal latency requirements of this
         * device. A value of zero will be interpreted as a 'do not care'.
         */
        uint_t  dlim_dmaspeed;

} ddi_dma_lim_t;

#elif defined(__x86)

/*
 * values for dlim_minxfer
 */
#define DMA_UNIT_8  1
#define DMA_UNIT_16 2
#define DMA_UNIT_32 4

/*
 * Version number
 */
#define DMALIM_VER0     ((0x86000000) + 0)

typedef struct ddi_dma_lim {

        /*
         * Low range of 32 bit addressing capability.
         */
        uint_t  dlim_addr_lo;

        /*
         * Upper Inclusive bound of 32 bit addressing capability.
         *
         * The ISA nexus restricts this to 0x00ffffff, since this bus has
         * only 24 address lines.  This enforces the 16 Mb address limitation.
         * The EISA nexus restricts this to 0xffffffff.
         */
        uint_t  dlim_addr_hi;

        /*
         * DMA engine counter not used; set to 0
         */
        uint_t  dlim_cntr_max;

        /*
         *  DMA burst sizes not used; set to 1
         */
        uint_t  dlim_burstsizes;

        /*
         * Minimum effective DMA transfer size.
         *
         * This value specifies the minimum effective granularity of the
         * DMA engine. It is distinct from dlim_burstsizes in that it
         * describes the minimum amount of access a DMA transfer will
         * effect. dlim_burstsizes describes in what electrical fashion
         * the DMA engine might perform its accesses, while dlim_minxfer
         * describes the minimum amount of memory that can be touched by
         * the DMA transfer.
         *
         * This value also implies the required address alignment.
         * The number of bytes transferred is assumed to be
         *      dlim_minxfer * (DMA engine count)
         *
         * It should be set to DMA_UNIT_8, DMA_UNIT_16, or DMA_UNIT_32.
         */
        uint_t  dlim_minxfer;

        /*
         * Expected average data rate for this DMA engine
         * while transferring data.
         *
         * This is used as a hint for a number of operations that might
         * want to know the possible optimal latency requirements of this
         * device. A value of zero will be interpreted as a 'do not care'.
         */
        uint_t  dlim_dmaspeed;


        /*
         * Version number of this structure
         */
        uint_t  dlim_version;   /* = 0x86 << 24 + 0 */

        /*
         * Inclusive upper bound with which the DMA engine's Address acts as
         * a register.
         * This handles the case where an upper portion of a DMA address
         * register is a latch instead of being a full 32 bit register
         * (e.g., the upper 16 bits remain constant while the lower 16 bits
         * are incremented for each DMA transfer).
         *
         * The ISA nexus restricts only 3rd-party DMA requests to 0x0000ffff,
         * since the ISA DMA engine has a 16-bit register for low address and
         * an 8-bit latch for high address.  This enforces the first 64 Kb
         * limitation (address boundary).
         * The EISA nexus restricts only 3rd-party DMA requests to 0xffffffff.
         */
        uint_t  dlim_adreg_max;

        /*
         * Maximum transfer count that the DMA engine can handle.
         *
         * The ISA nexus restricts only 3rd-party DMA requests to 0x0000ffff,
         * since the ISA DMA engine has a 16-bit register for counting.
         * This enforces the other 64 Kb limitation (count size).
         * The EISA nexus restricts only 3rd-party DMA requests to 0x00ffffff,
         * since the EISA DMA engine has a 24-bit register for counting.
         *
         * This transfer count limitation is a per segment limitation.
         * It can also be used to restrict the size of segments.
         *
         * This is used as a bit mask, so it must be a power of 2, minus 1.
         */
        uint_t  dlim_ctreg_max;

        /*
         * Granularity of DMA transfer, in units of bytes.
         *
         * Breakup sizes must be multiples of this value.
         * If no scatter/gather capabilty is specified, then the size of
         * each DMA transfer must be a multiple of this value.
         *
         * If there is scatter/gather capability, then a single cookie cannot
         * be smaller in size than the minimum xfer value, and may be less
         * than the granularity value.  The total transfer length of the
         * scatter/gather list should be a multiple of the granularity value;
         * use dlim_sgllen to specify the length of the scatter/gather list.
         *
         * This value should be equal to the sector size of the device.
         */
        uint_t  dlim_granular;

        /*
         * Length of scatter/gather list
         *
         * This value specifies the number of segments or cookies that a DMA
         * engine can consume in one i/o request to the device.  For 3rd-party
         * DMA that uses the bus nexus this should be set to 1.  Devices with
         * 1st-party DMA capability should specify the number of entries in
         * its scatter/gather list.  The breakup routine will ensure that each
         * group of dlim_sgllen cookies (within a DMA window) will have a
         * total transfer length that is a multiple of dlim_granular.
         *
         *      < 0  :  tbd
         *      = 0  :  breakup is for PIO.
         *      = 1  :  breakup is for DMA engine with no scatter/gather
         *              capability.
         *      >= 2 :  breakup is for DMA engine with scatter/gather
         *              capability; value is max number of entries in list.
         *
         * Note that this list length is not dependent on the DMA window
         * size.  The size of the DMA window is based on resources consumed,
         * such as intermediate buffers.  Several s/g lists may exist within
         * a window.  But the end of a window does imply the end of the s/g
         * list.
         */
        short   dlim_sgllen;

        /*
         * Size of device i/o request
         *
         * This value indicates the maximum number of bytes the device
         * can transmit/receive for one i/o command.  This limitation is
         * significant ony if it is less than (dlim_ctreg_max * dlim_sgllen).
         */
        uint_t  dlim_reqsize;

} ddi_dma_lim_t;

#else
#error "struct ddi_dma_lim not defined for this architecture"
#endif  /* defined(__sparc) */

/*
 * Flags definition for dma_attr_flags
 */

/*
 * return physical DMA address on platforms
 * which support DVMA
 */
#define DDI_DMA_FORCE_PHYSICAL          0x0100

/*
 * An error will be flagged for DMA data path errors
 */
#define DDI_DMA_FLAGERR                 0x200

/*
 * Enable relaxed ordering
 */
#define DDI_DMA_RELAXED_ORDERING        0x400


/*
 * Consolidation private x86 only flag which will cause a bounce buffer
 * (paddr < dma_attr_seg) to be used if the buffer passed to the bind
 * operation contains pages both above and below dma_attr_seg. If this flag
 * is set, dma_attr_seg must be <= dma_attr_addr_hi.
 */
#define _DDI_DMA_BOUNCE_ON_SEG          0x8000

#define DMA_ATTR_V0             0
#define DMA_ATTR_VERSION        DMA_ATTR_V0

typedef struct ddi_dma_attr {
        uint_t          dma_attr_version;       /* version number */
        uint64_t        dma_attr_addr_lo;       /* low DMA address range */
        uint64_t        dma_attr_addr_hi;       /* high DMA address range */
        uint64_t        dma_attr_count_max;     /* DMA counter register */
        uint64_t        dma_attr_align;         /* DMA address alignment */
        uint_t          dma_attr_burstsizes;    /* DMA burstsizes */
        uint32_t        dma_attr_minxfer;       /* min effective DMA size */
        uint64_t        dma_attr_maxxfer;       /* max DMA xfer size */
        uint64_t        dma_attr_seg;           /* segment boundary */
        int             dma_attr_sgllen;        /* s/g length */
        uint32_t        dma_attr_granular;      /* granularity of device */
        uint_t          dma_attr_flags;         /* Bus specific DMA flags */
} ddi_dma_attr_t;

/*
 * Handy macro to set a maximum bit value (should be elsewhere)
 *
 * Clear off all bits lower then 'mybit' in val; if there are no
 * bits higher than or equal to mybit in val then set mybit. Assumes
 * mybit equals some power of 2 and is not zero.
 */
#define maxbit(val, mybit)      \
        ((val) & ~((mybit)-1)) | ((((val) & ~((mybit)-1)) == 0) ? (mybit) : 0)

/*
 * Handy macro to set a minimum bit value (should be elsewhere)
 *
 * Clear off all bits higher then 'mybit' in val; if there are no
 * bits lower than or equal to mybit in val then set mybit. Assumes
 * mybit equals some pow2 and is not zero.
 */
#define minbit(val, mybit)      \
        (((val)&((mybit)|((mybit)-1))) | \
        ((((val) & ((mybit)-1)) == 0) ? (mybit) : 0))

/*
 * Structure of a request to map an object for DMA.
 */
typedef struct ddi_dma_req {
        /*
         * Caller's DMA engine constraints.
         *
         * If there are no particular constraints to the caller's DMA
         * engine, this field may be set to NULL. The implementation DMA
         * setup functions will then select a set of standard beginning
         * constraints.
         *
         * In either case, as the mapping proceeds, the initial DMA
         * constraints may become more restrictive as each intervening
         * nexus might add further restrictions.
         */
        ddi_dma_lim_t   *dmar_limits;

        /*
         * Contains the information passed to the DMA mapping allocation
         * routine(s).
         */
        uint_t          dmar_flags;

        /*
         * Callback function. A caller of the DMA mapping functions must
         * specify by filling in this field whether the allocation routines
         * can sleep awaiting mapping resources, must *not* sleep awaiting
         * resources, or may *not* sleep awaiting any resources and must
         * call the function specified by dmar_fp with the the argument
         * dmar_arg when resources might have become available at a future
         * time.
         */
        int             (*dmar_fp)();

        caddr_t         dmar_arg;       /* Callback function argument */

        /*
         * Description of the object to be mapped for DMA.
         * Must be last in this structure in case that the
         * union ddi_dma_obj_t changes in the future.
         */
        ddi_dma_obj_t   dmar_object;

} ddi_dma_req_t;

/*
 * Defines for the DMA mapping allocation functions
 *
 * If a DMA callback funtion is set to anything other than the following
 * defines then it is assumed that one wishes a callback and is providing
 * a function address.
 */
#define DDI_DMA_DONTWAIT        ((int (*)(caddr_t))0)
#define DDI_DMA_SLEEP           ((int (*)(caddr_t))1)

/*
 * Return values from callback functions.
 */
#define DDI_DMA_CALLBACK_RUNOUT 0
#define DDI_DMA_CALLBACK_DONE   1

/*
 * Flag definitions for the allocation functions.
 */
#define DDI_DMA_WRITE           0x0001  /* Direction memory --> IO      */
#define DDI_DMA_READ            0x0002  /* Direction IO --> memory      */
#define DDI_DMA_RDWR            (DDI_DMA_READ | DDI_DMA_WRITE)

/*
 * If possible, establish a MMU redzone after the mapping (to protect
 * against cheap DMA hardware that might get out of control).
 */
#define DDI_DMA_REDZONE         0x0004

/*
 * A partial allocation is allowed. That is, if the size of the object
 * exceeds the mapping resources available, only map a portion of the
 * object and return status indicating that this took place. The caller
 * can use the functions ddi_dma_numwin(9F) and ddi_dma_getwin(9F) to
 * change, at a later point, the actual mapped portion of the object.
 *
 * The mapped portion begins at offset 0 of the object.
 *
 */
#define DDI_DMA_PARTIAL         0x0008

/*
 * Map the object for byte consistent access. Note that explicit
 * synchronization (via ddi_dma_sync(9F)) will still be required.
 * Consider this flag to be a hint to the mapping routines as to
 * the intended use of the mapping.
 *
 * Normal data transfers can be usually consider to use 'streaming'
 * modes of operations. They start at a specific point, transfer a
 * fairly large amount of data sequentially, and then stop (usually
 * on a well aligned boundary).
 *
 * Control mode data transfers (for memory resident device control blocks,
 * e.g., ethernet message descriptors) do not access memory in such
 * a streaming sequential fashion. Instead, they tend to modify a few
 * words or bytes, move around and maybe modify a few more.
 *
 * There are many machine implementations that make this difficult to
 * control in a generic and seamless fashion. Therefore, explicit synch-
 * ronization steps (via ddi_dma_sync(9F)) are still required (even if you
 * ask for a byte-consistent mapping) in order to make the view of the
 * memory object shared between a CPU and a DMA master in consistent.
 * However, judicious use of this flag can give sufficient hints to
 * the mapping routines to attempt to pick the most efficacious mapping
 * such that the synchronization steps are as efficient as possible.
 *
 */
#define DDI_DMA_CONSISTENT      0x0010

/*
 * Some DMA mappings have to be 'exclusive' access.
 */
#define DDI_DMA_EXCLUSIVE       0x0020

/*
 * Sequential, unidirectional, block-sized and block aligned transfers
 */
#define DDI_DMA_STREAMING       0x0040

/*
 * Support for 64-bit SBus devices
 */
#define DDI_DMA_SBUS_64BIT      0x2000

/*
 * Return values from the mapping allocation functions.
 */

/*
 * succeeded in satisfying request
 */
#define DDI_DMA_MAPPED          0

/*
 * Mapping is legitimate (for advisory calls).
 */
#define DDI_DMA_MAPOK           0

/*
 * Succeeded in mapping a portion of the request.
 */
#define DDI_DMA_PARTIAL_MAP     1

/*
 * indicates end of window/segment list
 */
#define DDI_DMA_DONE            2

/*
 * No resources to map request.
 */
#define DDI_DMA_NORESOURCES     -1

/*
 * Can't establish a mapping to the specified object
 * (no specific reason).
 */
#define DDI_DMA_NOMAPPING       -2

/*
 * The request is too big to be mapped.
 */
#define DDI_DMA_TOOBIG          -3

/*
 * The request is too small to be mapped.
 */
#define DDI_DMA_TOOSMALL        -4

/*
 * The request cannot be mapped because the object
 * is locked against mapping by another DMA master.
 */
#define DDI_DMA_LOCKED          -5

/*
 * The request cannot be mapped because the limits
 * structure has bogus values.
 */
#define DDI_DMA_BADLIMITS       -6

/*
 * the segment/window pointer is stale
 */
#define DDI_DMA_STALE           -7

/*
 * The system can't allocate DMA resources using
 * the given DMA attributes
 */
#define DDI_DMA_BADATTR         -8

/*
 * A DMA handle is already used for a DMA
 */
#define DDI_DMA_INUSE           -9


/*
 * DVMA disabled or not supported. use physical DMA
 */
#define DDI_DMA_USE_PHYSICAL            -10


/*
 * In order for the access to a memory object to be consistent
 * between a device and a CPU, the function ddi_dma_sync(9F)
 * must be called upon the DMA handle. The following flags
 * define whose view of the object should be made consistent.
 * There are different flags here because on different machines
 * there are definite performance implications of how long
 * such synchronization takes.
 *
 * DDI_DMA_SYNC_FORDEV makes all device references to the object
 * mapped by the DMA handle up to date. It should be used by a
 * driver after a cpu modifies the memory object (over the range
 * specified by the other arguments to the ddi_dma_sync(9F) call).
 *
 * DDI_DMA_SYNC_FORCPU makes all cpu references to the object
 * mapped by the DMA handle up to date. It should be used
 * by a driver after the receipt of data from the device to
 * the memory object is done (over the range specified by
 * the other arguments to the ddi_dma_sync(9F) call).
 *
 * If the only mapping that concerns the driver is one for the
 * kernel (such as memory allocated by ddi_iopb_alloc(9F)), the
 * flag DDI_DMA_SYNC_FORKERNEL can be used. This is a hint to the
 * system that if it can synchronize the kernel's view faster
 * that the CPU's view, it can do so, otherwise it acts the
 * same as DDI_DMA_SYNC_FORCPU. DDI_DMA_SYNC_FORKERNEL might
 * speed up the synchronization of kernel mappings in case of
 * non IO-coherent CPU caches.
 */
#define DDI_DMA_SYNC_FORDEV     0x0
#define DDI_DMA_SYNC_FORCPU     0x1
#define DDI_DMA_SYNC_FORKERNEL  0x2

/*
 * Bus nexus control functions for DMA
 */

/*
 * Control operations, defined here so that devops.h can be included
 * by drivers without having to include a specific SYSDDI implementation
 * header file.
 */

enum ddi_dma_ctlops {
        DDI_DMA_FREE,           /* obsolete - do not use                */
        DDI_DMA_SYNC,           /* obsolete - do not use                */
        DDI_DMA_HTOC,           /* obsolete - do not use                */
        DDI_DMA_KVADDR,         /* obsolete - do not use                */
        DDI_DMA_MOVWIN,         /* obsolete - do not use                */
        DDI_DMA_REPWIN,         /* obsolete - do not use                */
        DDI_DMA_GETERR,         /* obsolete - do not use                */
        DDI_DMA_COFF,           /* obsolete - do not use                */
        DDI_DMA_NEXTWIN,        /* obsolete - do not use                */
        DDI_DMA_NEXTSEG,        /* obsolete - do not use                */
        DDI_DMA_SEGTOC,         /* obsolete - do not use                */
        DDI_DMA_RESERVE,        /* reserve some DVMA range              */
        DDI_DMA_RELEASE,        /* free preallocated DVMA range         */
        DDI_DMA_RESETH,         /* obsolete - do not use                */
        DDI_DMA_CKSYNC,         /* obsolete - do not use                */
        DDI_DMA_IOPB_ALLOC,     /* obsolete - do not use                */
        DDI_DMA_IOPB_FREE,      /* obsolete - do not use                */
        DDI_DMA_SMEM_ALLOC,     /* obsolete - do not use                */
        DDI_DMA_SMEM_FREE,      /* obsolete - do not use                */
        DDI_DMA_SET_SBUS64,     /* 64 bit SBus support                  */
        DDI_DMA_REMAP,          /* remap DVMA buffers after relocation  */

                /*
                 * control ops for DMA engine on motherboard
                 */
        DDI_DMA_E_ACQUIRE,      /* get channel for exclusive use        */
        DDI_DMA_E_FREE,         /* release channel                      */
        DDI_DMA_E_1STPTY,       /* setup channel for 1st party DMA      */
        DDI_DMA_E_GETCB,        /* get control block for DMA engine     */
        DDI_DMA_E_FREECB,       /* free control blk for DMA engine      */
        DDI_DMA_E_PROG,         /* program channel of DMA engine        */
        DDI_DMA_E_SWSETUP,      /* setup channel for software control   */
        DDI_DMA_E_SWSTART,      /* software operation of DMA channel    */
        DDI_DMA_E_ENABLE,       /* enable channel of DMA engine         */
        DDI_DMA_E_STOP,         /* stop a channel of DMA engine         */
        DDI_DMA_E_DISABLE,      /* disable channel of DMA engine        */
        DDI_DMA_E_GETCNT,       /* get remaining xfer count             */
        DDI_DMA_E_GETLIM,       /* obsolete - do not use                */
        DDI_DMA_E_GETATTR       /* get DMA engine attributes            */
};

/*
 * Cache attribute flags:
 *
 * IOMEM_DATA_CACHED
 *   The CPU can cache the data it fetches and push it to memory at a later
 *   time. This is the default attribute and used if no cache attributes is
 *   specified.
 *
 * IOMEM_DATA_UC_WR_COMBINE
 *   The CPU never caches the data but writes may occur out of order or be
 *   combined. It implies re-ordering.
 *
 * IOMEM_DATA_UNCACHED
 *   The CPU never caches the data and has uncacheable access to memory.
 *   It also implies strict ordering.
 *
 * The cache attributes are mutually exclusive, and any combination of the
 * values leads to a failure. On the sparc architecture, only IOMEM_DATA_CACHED
 * is meaningful, but others lead to a failure.
 */
#define IOMEM_DATA_CACHED               0x10000 /* data is cached */
#define IOMEM_DATA_UC_WR_COMBINE        0x20000 /* data is not cached, but */
                                                /* writes might be combined */
#define IOMEM_DATA_UNCACHED             0x40000 /* data is not cached. */
#define IOMEM_DATA_MASK                 0xF0000 /* cache attrs mask */

/*
 * Check if either uncacheable or write-combining specified. (those flags are
 * mutually exclusive) This macro is used to override hat attributes if either
 * one is set.
 */
#define OVERRIDE_CACHE_ATTR(attr)       \
        (attr & (IOMEM_DATA_UNCACHED | IOMEM_DATA_UC_WR_COMBINE))

/*
 * Get the cache attribute from flags. If there is no attributes,
 * return IOMEM_DATA_CACHED (default attribute).
 */
#define IOMEM_CACHE_ATTR(flags) \
        ((flags & IOMEM_DATA_MASK) ? (flags & IOMEM_DATA_MASK) : \
            IOMEM_DATA_CACHED)

#ifdef  __cplusplus
}
#endif

#endif  /* _SYS_DDIDMAREQ_H */