usr/src/cmd/luxadm/errorcodes.h

   1 /*
   2  * CDDL HEADER START
   3  *
   4  * The contents of this file are subject to the terms of the
   5  * Common Development and Distribution License (the "License").
   6  * You may not use this file except in compliance with the License.
   7  *
   8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
   9  * or http://www.opensolaris.org/os/licensing.
  10  * See the License for the specific language governing permissions
  11  * and limitations under the License.
  12  *
  13  * When distributing Covered Code, include this CDDL HEADER in each
  14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  15  * If applicable, add the following below this CDDL HEADER, with the
  16  * fields enclosed by brackets "[]" replaced with your own identifying
  17  * information: Portions Copyright [yyyy] [name of copyright owner]
  18  *
  19  * CDDL HEADER END
  20  */
  21 /*
  22  * Copyright 2008 Sun Microsystems, Inc.  All rights reserved.
  23  * Use is subject to license terms.
  24  */
  25
  26 #ifndef _ERRORCODES_H
  27 #define _ERRORCODES_H
  28
  29
  30
  31
  32 /*
  33  * Include any headers you depend on.
  34  */
  35
  36 #ifdef  __cplusplus
  37 extern "C" {
  38 #endif
  39
  40
  41 /* On the sparc platform, error codes come from stgcom.h */
  42 #ifdef __x86
  43
  44 /*
  45  * All error numbers below this base value
  46  * are assumed to be UNIX error codes.
  47  */
  48
  49 #define L_BASE                          L_SCSI_ERROR
  50
  51 /*
  52  * SCSI Errors
  53  *
  54  */
  55 /* SCSI error */
  56 #define L_SCSI_ERROR                    0x10000
  57
  58 /* Receive Diagnostics: Transfer length is not word aligned */
  59 #define L_RD_INVLD_TRNSFR_LEN           0x11002
  60
  61 /* No disk element found in Receive diag. page */
  62 #define L_RD_NO_DISK_ELEM               0x11003
  63
  64 /* Illegal mode sense page length */
  65 #define L_ILLEGAL_MODE_SENSE_PAGE       0x11004
  66
  67 /* Invalid number of ENV. SENSE pages */
  68 #define L_INVALID_NO_OF_ENVSEN_PAGES    0x11005
  69
  70 /* Buffer is *too* small to hold more than 8 pages */
  71 #define L_INVALID_BUF_LEN               0x11006
  72
  73 /* Scsi_vhci errors */
  74 #define L_SCSI_VHCI_ERROR               0x11007
  75 #define L_SCSI_VHCI_ALREADY_ACTIVE      0x11008
  76 #define L_SCSI_VHCI_NO_STANDBY          0x11009
  77 #define L_SCSI_VHCI_FAILOVER_NOTSUP     0x1100a
  78 #define L_SCSI_VHCI_FAILOVER_BUSY       0x1100b
  79
  80
  81 /*
  82  * Error definitions
  83  * for Format Errors.
  84  */
  85 #define L_INVALID_PATH                  0x20200
  86
  87 /* Failed to open a given path */
  88 #define L_OPEN_PATH_FAIL                0x20001
  89
  90 /* Invalid password length. */
  91 #define L_INVALID_PASSWORD_LEN          0x20002
  92
  93 /* Given disk physical path is not valid. */
  94 #define L_INVLD_PHYS_PATH_TO_DISK       0x20004
  95
  96 /* Invalid name id found in the physical path */
  97 #define L_INVLD_ID_FOUND                0x20005
  98
  99 /* Invalid WWN format found */
 100 #define L_INVLD_WWN_FORMAT              0x20006
 101
 102 /* No WWN found in the disk's physical path */
 103 #define L_NO_WWN_FOUND_IN_PATH          0x20007
 104
 105 /* No Loop address found in the phys path */
 106 #define L_NO_LOOP_ADDRS_FOUND           0x20008
 107
 108 /* Invalid port number found in the phys path */
 109 #define L_INVLD_PORT_IN_PATH            0x20009
 110
 111 /* Invalid LED request */
 112 #define L_INVALID_LED_RQST              0x20010
 113
 114 /* Invalid path format */
 115 #define L_INVALID_PATH_FORMAT           0x20011
 116
 117 /* failed to get the physical path */
 118 #define L_NO_PHYS_PATH                  0x20012
 119
 120 /* failed to get the ses path */
 121 #define L_NO_SES_PATH                   0x20015
 122
 123 /* No "/" found in the physical path */
 124 #define L_INVLD_PATH_NO_SLASH_FND       0x20100
 125
 126 /* No "@" found in the physical path */
 127 #define L_INVLD_PATH_NO_ATSIGN_FND      0x20101
 128
 129 /* Invalid slot (slot < 0 or slot > 10). */
 130 #define L_INVALID_SLOT                  0x20102
 131
 132 /* No valid path to a device */
 133 #define L_NO_VALID_PATH                 0x20103
 134
 135 /* No disk devices found in /dev/rdsk directory */
 136 #define L_NO_DISK_DEV_FOUND             0x20104
 137
 138 /* No tape devices found in /dev/rmt directory */
 139 #define L_NO_TAPE_DEV_FOUND             0x20105
 140
 141 /* Device's Node WWN not found in the WWN list. */
 142 #define L_NO_NODE_WWN_IN_WWNLIST        0x20106
 143
 144 /* Device's Node WWN not found in the Box list. */
 145 #define L_NO_NODE_WWN_IN_BOXLIST        0x20107
 146
 147 /* Null WWN list found. */
 148 #define L_NULL_WWN_LIST                 0x20108
 149
 150 /* No devices found. */
 151 #define L_NO_DEVICES_FOUND              0x20109
 152
 153 /* function arg error in wwn_list process */
 154 #define L_PROC_WWN_ARG_ERROR            0x20110
 155
 156 /* WWN property not found */
 157 #define L_NO_WWN_PROP_FOUND             0x20111
 158
 159 /* No driver nodes found for requested driver */
 160 #define L_NO_DRIVER_NODES_FOUND         0x20112
 161
 162 /* ULP error on device(s) */
 163 #define L_GET_DEV_LIST_ULP_FAILURE      0x20150
 164
 165 /*
 166  * Error definitions
 167  * for FC Loop (FC4 devices).
 168  */
 169 /* Invalid loop map found */
 170 #define L_INVALID_LOOP_MAP              0x20202
 171
 172 /* SFIOCGMAP ioctl failed */
 173 #define L_SFIOCGMAP_IOCTL_FAIL          0x20203
 174
 175 /* FCIO_GETMAP ioctl failed */
 176 #define L_FCIO_GETMAP_IOCTL_FAIL        0x20204
 177
 178 /* FCIO_LINKSTATUS ioctl failed */
 179 #define L_FCIO_LINKSTATUS_FAILED        0x20205
 180
 181 /* FCIO_GETMAP: Invalid # of entries */
 182 #define L_FCIOGETMAP_INVLD_LEN          0x20206
 183
 184 /* FCIO_FORCE_LIP ioctl failed. */
 185 #define L_FCIO_FORCE_LIP_FAIL           0x20207
 186
 187 /* Error definitions for FC devices */
 188 /* FCIO_RESET_LINK ioctl failed */
 189 #define L_FCIO_RESET_LINK_FAIL          0x20208
 190
 191 /* FCIO_GET_FCODE_REV_FAIL ioctl failed */
 192 #define L_FCIO_GET_FCODE_REV_FAIL       0x20209
 193
 194 /* FCIO_GET_FW_REV_FAIL ioctl failed */
 195 #define L_FCIO_GET_FW_REV_FAIL          0x20210
 196
 197 /* FCIO_GET_DEV_LIST returns invalid dev. counts */
 198 #define L_INVALID_DEVICE_COUNT          0x20211
 199
 200 /* L_FCIO_GET_NUM_DEVS_FAIL ioctl failed */
 201 #define L_FCIO_GET_NUM_DEVS_FAIL        0x20212
 202
 203 /* L_FCIO_GET_DEV_LIST_FAIL ioctl failed */
 204 #define L_FCIO_GET_DEV_LIST_FAIL        0x20213
 205
 206 /* L_FCIO_GET_LINK_STATUS ioctl failed */
 207 #define L_FCIO_GET_LINK_STATUS_FAIL     0x20214
 208
 209 /* L_FCIO_LOOPBACK_INTERNAL or FCIO_CMD/FCIO_LASER_OFF ioctl failed */
 210 #define L_PORT_OFFLINE_FAIL             0x20215
 211
 212 /* Internal Loopback or laser off ioctls not supported */
 213 #define L_PORT_OFFLINE_UNSUPPORTED      0x20216
 214
 215 /* L_FCIO_NO_LOOPBACK or FCIO_CMD/FCIO_LASER_ON ioctl failed */
 216 #define L_PORT_ONLINE_FAIL              0x20217
 217
 218 /* No-Loopback or laser on ioctls not supported */
 219 #define L_PORT_ONLINE_UNSUPPORTED       0x20218
 220
 221 /* L_FCIO_GET_HOST_PARAMS ioctl failed */
 222 #define L_FCIO_GET_HOST_PARAMS_FAIL     0x20219
 223
 224 /* Loopback mode failure */
 225 #define L_LOOPBACK_FAILED               0x20220
 226
 227 /* Loopback unsupported */
 228 #define L_LOOPBACK_UNSUPPORTED          0x20221
 229
 230 /* FCIO_FORCE_LIP ioctl failed on one of the paths, say, of an MPXIO device */
 231 #define L_FCIO_FORCE_LIP_PARTIAL_FAIL   0x20222
 232
 233 /*
 234  * Error definitions
 235  * for Fabric FC driver ioctls
 236  */
 237 /* FCP_TGT_INQUIRY ioctl failed */
 238 #define L_FCP_TGT_INQUIRY_FAIL          0x20250
 239
 240 /*
 241  * Error definitions
 242  * for 24-bit address handling
 243  */
 244 /* Private loop address > 0xFF found */
 245 #define L_INVALID_PRIVATE_LOOP_ADDRESS  0x20401
 246
 247 /* Encountered an unexpected fibre channel topology value */
 248 #define L_UNEXPECTED_FC_TOPOLOGY        0x20402
 249
 250 /* Fabric address was not found */
 251 #define L_NO_FABRIC_ADDR_FOUND          0x20403
 252
 253 /* The FCIO_GET_TOPOLOGY ioctl failed */
 254 #define L_FCIO_GET_TOPOLOGY_FAIL        0x20404
 255
 256 /* Invalid fabric or public loop address */
 257 #define L_INVALID_FABRIC_ADDRESS        0x20405
 258
 259 /* Point to Point fibre channel topology not supported */
 260 #define L_PT_PT_FC_TOP_NOT_SUPPORTED    0x20406
 261
 262 /*
 263  * Error definitions for Tapestry SAN support.
 264  */
 265 /* The FCIO_DEV_LOGIN ioctl failed */
 266 #define L_FCIO_DEV_LOGIN_FAIL           0x20407
 267
 268 /* The FCIO_DEV_LOGOUT ioctl failed */
 269 #define L_FCIO_DEV_LOGOUT_FAIL          0x20408
 270
 271 /* Operation not supported on connected topology */
 272 #define L_OPNOSUPP_ON_TOPOLOGY          0x20409
 273
 274 /* Operation not supported on the path */
 275 #define L_INVALID_PATH_TYPE             0x20410
 276
 277 /* FCIO_GET_STATE ioctl failed */
 278 #define L_FCIO_GET_STATE_FAIL           0x20411
 279
 280 /* input WWN not found in dev list */
 281 #define L_WWN_NOT_FOUND_IN_DEV_LIST     0x20412
 282
 283 /*
 284  * Error definitions for
 285  * g_dev_map_init related routines.
 286  */
 287 /* input addr invalid */
 288 #define L_INVALID_MAP_DEV_ADDR          0x20430
 289
 290 /* input property invalid */
 291 #define L_INVALID_MAP_DEV_PROP_NAME     0x20431
 292
 293 /* input property invalid */
 294 #define L_INVALID_MAP_DEV_PROP_TYPE     0x20432
 295
 296 /* input property name invalid */
 297 #define L_INVALID_MAP_DEV_PROP          0x20433
 298
 299 /* device not found */
 300 #define L_NO_SUCH_DEV_FOUND             0x20434
 301
 302 /* prop not found */
 303 #define L_NO_SUCH_PROP_FOUND            0x20435
 304
 305 /* invalid arg found */
 306 #define L_INVALID_ARG                   0x20436
 307
 308 /*
 309  * Error definitions
 310  * for Downloading IB FW.
 311  */
 312 /* Invalid download file checksum */
 313 #define L_DWNLD_CHKSUM_FAILED           0x20301
 314
 315 /* Unable to read download exec header */
 316 #define L_DWNLD_READ_HEADER_FAIL        0x20302
 317
 318 /* Number of bytes read from download file is not correct */
 319 #define L_DWNLD_READ_INCORRECT_BYTES    0x20303
 320
 321 /* Wrong text segment size */
 322 #define L_DWNLD_INVALID_TEXT_SIZE       0x20304
 323
 324 /* Error reading the download file */
 325 #define L_DWNLD_READ_ERROR              0x20305
 326
 327 /* Bad firmware magic found in the download file */
 328 #define L_DWNLD_BAD_FRMWARE             0x20306
 329
 330 /* Timeout message for the IB to be available */
 331 #define L_DWNLD_TIMED_OUT               0x20307
 332
 333 /* Error with Rec Diag page 1 */
 334 #define L_REC_DIAG_PG1                  0x20600
 335
 336 /* Invalid transfer Length */
 337 #define L_TRANSFER_LEN                  0x20601
 338
 339 /* A firmware file must be specified on the command line */
 340 #define L_REQUIRE_FILE                  0x20602
 341
 342
 343 /*
 344  * Error definitions
 345  * for System Errors
 346  */
 347 #define L_MALLOC_FAILED                 0x30000
 348
 349 #define L_MEMCPY_FAILED                 0x30001
 350
 351 /* Cannot get status for the given path */
 352 #define L_LSTAT_ERROR                   0x30020
 353
 354 /* Error reading the symbolic link */
 355 #define L_SYMLINK_ERROR                 0x30021
 356
 357 /* Could not convert std. time to hrs/min/sec */
 358 #define L_LOCALTIME_ERROR               0x30022
 359
 360 /* select() system call failed to wait for specified time */
 361 #define L_SELECT_ERROR                  0x30023
 362
 363 /* uname() system call failed to get the system info. */
 364 #define L_UNAME_FAILED                  0x30024
 365
 366 /* Cannot get status for the given path */
 367 #define L_FSTAT_ERROR                   0x30025
 368
 369 /* Cannot get status for the given path */
 370 #define L_STAT_ERROR                    0x30026
 371
 372 /* di_init() failed to return snapshot of device tree */
 373 #define L_DEV_SNAPSHOT_FAILED           0x30027
 374
 375 /* di_drv_first_node() failed to find a valid driver */
 376 #define L_PORT_DRIVER_NOT_FOUND         0x30029
 377
 378 /* failed to find any device paths */
 379 #define L_PHYS_PATH_NOT_FOUND           0x30030
 380
 381 /* No device identifier found  */
 382 #define L_NO_DEVID                      0x30031
 383
 384 /* Driver not supported */
 385 #define L_DRIVER_NOTSUPP                0x30032
 386
 387 /* di_prom_init failure */
 388 #define L_PROM_INIT_FAILED              0x30033
 389
 390 /*
 391  * Error definitions
 392  * for individual
 393  * devices.
 394  */
 395 /* Device busy */
 396 #define L_DEV_BUSY                      0x40000
 397
 398 /* Disk reserved */
 399 #define L_DEVICE_RESERVED               0x40001
 400
 401 /* One or more disks in enclosure are reserved */
 402 #define L_DISKS_RESERVED                0x40002
 403
 404 /* Exclusive open to a device failed. May be busy */
 405 #define L_EXCL_OPEN_FAILED              0x40003
 406
 407 /* Empty slot: Device not installed */
 408 #define L_SLOT_EMPTY                    0x40100
 409
 410
 411 /*
 412  * Error definitions
 413  * for Devctl functions.
 414  */
 415 /* Devctl acquire fails */
 416 #define L_ACQUIRE_FAIL                  0x40200
 417
 418
 419 /* Power off fails. Device may be busy */
 420 #define L_POWER_OFF_FAIL_BUSY           0x40300
 421
 422
 423 /*
 424  * Error definitions
 425  * specific to Enclosure.
 426  */
 427 /* Failed to change the enclosure name */
 428 #define L_ENCL_NAME_CHANGE_FAIL         0x40400
 429
 430 /* Duplicate enclosure names found */
 431 #define L_DUPLICATE_ENCLOSURES          0x40401
 432
 433 /* Invalid no. of dsks in SENA enclosure */
 434 #define L_INVALID_NUM_DISKS_ENCL        0x40402
 435
 436 /* Path is not to a SENA ecnlosure. */
 437 #define L_ENCL_INVALID_PATH             0x40403
 438
 439 /* Cannot get the box list */
 440 #define L_NO_ENCL_LIST_FOUND            0x40404
 441
 442
 443 /*
 444  * Error definitions
 445  * specific to IB.
 446  */
 447 /* No element returned from the enclosure */
 448 #define L_IB_NO_ELEM_FOUND              0x40500
 449
 450 /* Invalid page code found in Receive Diag. page.   */
 451 #define L_RD_PG_INVLD_CODE              0x40501
 452
 453 /* Reading Receive Diag. page failed: small buffer. */
 454 #define L_RD_PG_MIN_BUFF                0x40502
 455
 456 /* Get status failed    */
 457 #define L_GET_STATUS_FAILED             0x40600
 458
 459 /* Warning define. */
 460 #define L_WARNING                       0x90000
 461
 462 /* Persistant Rservation: Invalid transfer length */
 463 #define L_PR_INVLD_TRNSFR_LEN           0x10001
 464
 465 /*
 466  * Error definitions
 467  * for Format Errors.
 468  */
 469 /* box name conflicts with the SSA name */
 470 #define L_SSA_CONFLICT                  0x20013
 471
 472
 473 /*
 474  * Error definitions
 475  * for System Errors
 476  */
 477 /* drvconfig fail */
 478 #define L_DRVCONFIG_ERROR               0x31001
 479
 480 /* disks program failed */
 481 #define L_DISKS_ERROR                   0x31002
 482
 483 /* devlinks program failed */
 484 #define L_DEVLINKS_ERROR                0x31003
 485
 486 /* fail to read /dev/rdsk directory. */
 487 #define L_READ_DEV_DIR_ERROR            0x31004
 488
 489 /* Failed to open /dev/es/ directory. */
 490 #define L_OPEN_ES_DIR_FAILED            0x31005
 491
 492 /* fail to get status from /dev/es directory. */
 493 #define L_LSTAT_ES_DIR_ERROR            0x31006
 494
 495 /* disks program failed */
 496 #define L_TAPES_ERROR                   0x31007
 497
 498 /* fail to get status from /dev/rmt/directory. */
 499 #define L_STAT_RMT_DIR_ERROR            0x31008
 500
 501 /* fail to get status from /dev/rmt/directory. */
 502 #define L_STAT_DEV_DIR_ERROR            0x31009
 503
 504
 505 /*
 506  * Error definitions
 507  * specific to Back plane.
 508  */
 509 /* Backplane: Busy or reserved disks found */
 510 #define L_BP_BUSY_RESERVED              0x50000
 511
 512 /* Backplane: one or more busy disks found */
 513 #define L_BP_BUSY                       0x50001
 514
 515 /* Backplane: one or more reserved disks found */
 516 #define L_BP_RESERVED                   0x50002
 517
 518 /* No BP element found in the enclosure */
 519 #define L_NO_BP_ELEM_FOUND              0x50003
 520
 521 /*
 522  * Thread errors.
 523  */
 524 #define L_TH_CREATE                     0x60000
 525 #define L_TH_JOIN                       0x60001
 526
 527
 528
 529 #endif /* __x86 */
 530
 531
 532 #ifdef  __cplusplus
 533 }
 534 #endif
 535
 536 #endif  /* _ERRORCODES_H */