comm: add -Wall

[unleashed.git] / include / inet / sadb.h

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*
 * Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 * Copyright (c) 2012 Nexenta Systems, Inc. All rights reserved.
 * Copyright 2017 Joyent, Inc.
 */

#ifndef _INET_SADB_H
#define _INET_SADB_H

#ifdef  __cplusplus
extern "C" {
#endif

#include <inet/ipsec_info.h>
#include <sys/crypto/common.h>
#include <sys/crypto/api.h>
#include <sys/note.h>

#define IPSA_MAX_ADDRLEN 4      /* Max address len. (in 32-bits) for an SA. */

#define MAXSALTSIZE 8

/*
 * For combined mode ciphers, store the crypto_mechanism_t in the
 * per-packet ipsec_in_t/ipsec_out_t structures. This is because the PARAMS
 * and nonce values change for each packet. For non-combined mode
 * ciphers, these values are constant for the life of the SA.
 */
typedef struct ipsa_cm_mech_s {
        crypto_mechanism_t combined_mech;
        union {
                CK_AES_CCM_PARAMS paramu_ccm;
                CK_AES_GCM_PARAMS paramu_gcm;
        } paramu;
        uint8_t nonce[MAXSALTSIZE + sizeof (uint64_t)];
#define param_ulMACSize paramu.paramu_ccm.ulMACSize
#define param_ulNonceSize paramu.paramu_ccm.ipsa_ulNonceSize
#define param_ulAuthDataSize paramu.paramu_ccm.ipsa_ulAuthDataSize
#define param_ulDataSize paramu.paramu_ccm.ipsa_ulDataSize
#define param_nonce paramu.paramu_ccm.nonce
#define param_authData paramu.paramu_ccm.authData
#define param_pIv paramu.paramu_gcm.ipsa_pIv
#define param_ulIvLen paramu.paramu_gcm.ulIvLen
#define param_ulIvBits paramu.paramu_gcm.ulIvBits
#define param_pAAD paramu.paramu_gcm.pAAD
#define param_ulAADLen paramu.paramu_gcm.ulAADLen
#define param_ulTagBits paramu.paramu_gcm.ulTagBits
} ipsa_cm_mech_t;

/*
 * The Initialization Vector (also known as IV or Nonce) used to
 * initialize the Block Cipher, is made up of a Counter and a Salt.
 * The Counter is fixed at 64 bits and is incremented for each packet.
 * The Salt value can be any whole byte value upto 64 bits. This is
 * algorithm mode specific and can be configured with ipsecalgs(1m).
 *
 * We only support whole byte salt lengths, this is because the salt is
 * stored in an array of uint8_t's. This is enforced by ipsecalgs(1m)
 * which configures the salt length as a number of bytes. Checks are
 * made to ensure the salt length defined in ipsecalgs(1m) fits in
 * the ipsec_nonce_t.
 *
 * The Salt value remains constant for the life of the SA, the Salt is
 * know to both peers, but NOT transmitted on the network. The Counter
 * portion of the nonce is transmitted over the network with each packet
 * and is confusingly described as the Initialization Vector by RFCs
 * 4309/4106.
 *
 * The maximum Initialization Vector length is 128 bits, if the actual
 * size is less, its padded internally by the algorithm.
 *
 * The nonce structure is defined like this in the SA (ipsa_t)to ensure
 * the Initilization Vector (counter) is 64 bit aligned, because it will
 * be incremented as an uint64_t. The nonce as used by the algorithms is
 * a straight uint8_t array.
 *
 *                     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 *                     | | | | |x|x|x|x|               |
 *                     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 * salt_offset         <------>
 * ipsa_saltlen                <------->
 * ipsa_nonce_buf------^
 * ipsa_salt-------------~~~~~~^
 * ipsa_nonce------------~~~~~~^
 * ipsa_iv-----------------------------^
 */
typedef struct ipsec_nonce_s {
        uint8_t         salt[MAXSALTSIZE];
        uint64_t        iv;
} ipsec_nonce_t;

/*
 * IP security association.  Synchronization assumes 32-bit loads, so
 * the 64-bit quantities can't even be be read w/o locking it down!
 */

/* keying info */
typedef struct ipsa_key_s {
        uint8_t *sak_key;               /* Algorithm key. */
        uint_t sak_keylen;      /* Algorithm key length (in bytes). */
        uint_t sak_keybits;     /* Algorithm key length (in bits) */
        uint_t sak_algid;       /* Algorithm ID number. */
} ipsa_key_t;

typedef struct ipsa_s {
        struct ipsa_s *ipsa_next;       /* Next in hash bucket */
        struct ipsa_s **ipsa_ptpn;      /* Pointer to previous next pointer. */
        kmutex_t *ipsa_linklock;        /* Pointer to hash-chain lock. */
        void (*ipsa_freefunc)(struct ipsa_s *); /* freeassoc function */
        void (*ipsa_noncefunc)(struct ipsa_s *, uchar_t *,
            uint_t, uchar_t *, ipsa_cm_mech_t *, crypto_data_t *);
        /*
         * NOTE: I may need more pointers, depending on future SA
         * requirements.
         */
        ipsa_key_t ipsa_authkeydata;
#define ipsa_authkey ipsa_authkeydata.sak_key
#define ipsa_authkeylen ipsa_authkeydata.sak_keylen
#define ipsa_authkeybits ipsa_authkeydata.sak_keybits
#define ipsa_auth_alg ipsa_authkeydata.sak_algid
        ipsa_key_t ipsa_encrkeydata;
#define ipsa_encrkey ipsa_encrkeydata.sak_key
#define ipsa_encrkeylen ipsa_encrkeydata.sak_keylen
#define ipsa_encrkeybits ipsa_encrkeydata.sak_keybits
#define ipsa_encr_alg ipsa_encrkeydata.sak_algid

        struct ipsid_s *ipsa_src_cid;   /* Source certificate identity */
        struct ipsid_s *ipsa_dst_cid;   /* Destination certificate identity */
        mblk_t  *ipsa_lpkt;     /* Packet received while larval (CAS me) */
        mblk_t  *ipsa_bpkt_head;        /* Packets received while idle */
        mblk_t  *ipsa_bpkt_tail;
#define SADB_MAX_IDLEPKTS       100
        uint8_t ipsa_mblkcnt;   /* Number of packets received while idle */

        /*
         * PF_KEYv2 supports a replay window size of 255.  Hence there is a
         * need a bit vector to support a replay window of 255.  256 is a nice
         * round number, so I support that.
         *
         * Use an array of uint64_t for best performance on 64-bit
         * processors.  (And hope that 32-bit compilers can handle things
         * okay.)  The " >> 6 " is to get the appropriate number of 64-bit
         * ints.
         */
#define SADB_MAX_REPLAY 256     /* Must be 0 mod 64. */
        uint64_t ipsa_replay_arr[SADB_MAX_REPLAY >> 6];

        uint64_t ipsa_unique_id;        /* Non-zero for unique SAs */
        uint64_t ipsa_unique_mask;      /* mask value for unique_id */

        /*
         * Reference count semantics:
         *
         *      An SA has a reference count of 1 if something's pointing
         *      to it.  This includes being in a hash table.  So if an
         *      SA is in a hash table, it has a reference count of at least 1.
         *
         *      When a ptr. to an IPSA is assigned, you MUST REFHOLD after
         *      said assignment.  When a ptr. to an IPSA is released
         *      you MUST REFRELE.  When the refcount hits 0, REFRELE
         *      will free the IPSA.
         */
        kmutex_t ipsa_lock;     /* Locks non-linkage/refcnt fields. */
        /* Q:  Since I may be doing refcnts differently, will I need cv? */
        uint_t ipsa_refcnt;     /* Reference count. */

        /*
         * The following four time fields are the ones monitored by ah_ager()
         * and esp_ager() respectively.  They are all absolute wall-clock
         * times.  The times of creation (i.e. add time) and first use are
         * pretty straightforward.  The soft and hard expire times are
         * derived from the times of first use and creation, plus the minimum
         * expiration times in the fields that follow this.
         *
         * For example, if I had a hard add time of 30 seconds, and a hard
         * use time of 15, the ipsa_hardexpiretime would be time of add, plus
         * 30 seconds.  If I USE the SA such that time of first use plus 15
         * seconds would be earlier than the add time plus 30 seconds, then
         * ipsa_hardexpiretime would become this earlier time.
         */
        time_t ipsa_addtime;    /* Time I was added. */
        time_t ipsa_usetime;    /* Time of my first use. */
        time_t ipsa_lastuse;    /* Time of my last use. */
        time_t ipsa_idletime;   /* Seconds of idle time */
        time_t ipsa_last_nat_t_ka;      /* Time of my last NAT-T keepalive. */
        time_t ipsa_softexpiretime;     /* Time of my first soft expire. */
        time_t ipsa_hardexpiretime;     /* Time of my first hard expire. */
        time_t ipsa_idleexpiretime;     /* Time of my next idle expire time */

        struct ipsec_nonce_s *ipsa_nonce_buf;
        uint8_t *ipsa_nonce;
        uint_t ipsa_nonce_len;
        uint8_t *ipsa_salt;
        uint_t ipsa_saltbits;
        uint_t ipsa_saltlen;
        uint64_t *ipsa_iv;

        uint64_t ipsa_iv_hardexpire;
        uint64_t ipsa_iv_softexpire;
        /*
         * The following fields are directly reflected in PF_KEYv2 LIFETIME
         * extensions.  The time_ts are in number-of-seconds, and the bytes
         * are in... bytes.
         */
        time_t ipsa_softaddlt;  /* Seconds of soft lifetime after add. */
        time_t ipsa_softuselt;  /* Seconds of soft lifetime after first use. */
        time_t ipsa_hardaddlt;  /* Seconds of hard lifetime after add. */
        time_t ipsa_harduselt;  /* Seconds of hard lifetime after first use. */
        time_t ipsa_idleaddlt;  /* Seconds of idle time after add */
        time_t ipsa_idleuselt;  /* Seconds of idle time after first use */
        uint64_t ipsa_softbyteslt;      /* Bytes of soft lifetime. */
        uint64_t ipsa_hardbyteslt;      /* Bytes of hard lifetime. */
        uint64_t ipsa_bytes;    /* Bytes encrypted/authed by this SA. */

        /*
         * "Allocations" are a concept mentioned in PF_KEYv2.  We do not
         * support them, except to record them per the PF_KEYv2 spec.
         */
        uint_t ipsa_softalloc;  /* Allocations allowed (soft). */
        uint_t ipsa_hardalloc;  /* Allocations allowed (hard). */
        uint_t ipsa_alloc;      /* Allocations made. */

        uint_t ipsa_type;       /* Type of security association. (AH/etc.) */
        uint_t ipsa_state;      /* State of my association. */
        uint_t ipsa_replay_wsize; /* Size of replay window */
        uint32_t ipsa_flags;    /* Flags for security association. */
        uint32_t ipsa_spi;      /* Security parameters index. */
        uint32_t ipsa_replay;   /* Highest seen replay value for this SA. */
        uint32_t ipsa_kmp;      /* key management proto */
        uint64_t ipsa_kmc;      /* key management cookie (now 64-bit) */

        boolean_t ipsa_haspeer;         /* Has peer in another table. */

        /*
         * Address storage.
         * The source address can be INADDR_ANY, IN6ADDR_ANY, etc.
         *
         * Address families (per sys/socket.h) guide us.  We could have just
         * used sockaddr_storage
         */
        sa_family_t ipsa_addrfam;
        sa_family_t ipsa_innerfam;      /* Inner AF can be != src/dst AF. */

        uint32_t ipsa_srcaddr[IPSA_MAX_ADDRLEN];
        uint32_t ipsa_dstaddr[IPSA_MAX_ADDRLEN];
        uint32_t ipsa_innersrc[IPSA_MAX_ADDRLEN];
        uint32_t ipsa_innerdst[IPSA_MAX_ADDRLEN];

        uint8_t ipsa_innersrcpfx;
        uint8_t ipsa_innerdstpfx;

        uint16_t ipsa_inbound_cksum; /* cksum correction for inbound packets */
        uint16_t ipsa_local_nat_port;   /* Local NAT-T port.  (0 --> 4500) */
        uint16_t ipsa_remote_nat_port; /* The other port that isn't 4500 */

        /* these can only be v4 */
        uint32_t ipsa_natt_addr_loc;
        uint32_t ipsa_natt_addr_rem;

        /*
         * icmp type and code. *_end are to specify ranges. if only
         * a single value, * and *_end are the same value.
         */
        uint8_t ipsa_icmp_type;
        uint8_t ipsa_icmp_type_end;
        uint8_t ipsa_icmp_code;
        uint8_t ipsa_icmp_code_end;

        /*
         * For the kernel crypto framework.
         */
        crypto_key_t ipsa_kcfauthkey;           /* authentication key */
        crypto_key_t ipsa_kcfencrkey;           /* encryption key */
        crypto_ctx_template_t ipsa_authtmpl;    /* auth context template */
        crypto_ctx_template_t ipsa_encrtmpl;    /* encr context template */
        crypto_mechanism_t ipsa_amech;          /* auth mech type and ICV len */
        crypto_mechanism_t ipsa_emech;          /* encr mech type */
        size_t ipsa_mac_len;                    /* auth MAC/ICV length */
        size_t ipsa_iv_len;                     /* encr IV length */
        size_t ipsa_datalen;                    /* block length in bytes. */

        /*
         * Input and output processing functions called from IP.
         * The mblk_t is the data; the IPsec information is in the attributes
         * Returns NULL if the mblk is consumed which it is if there was
         * a failure or if pending. If failure then
         * the ipIfInDiscards/OutDiscards counters are increased.
         */
        mblk_t *(*ipsa_output_func)(mblk_t *, ip_xmit_attr_t *);
        mblk_t *(*ipsa_input_func)(mblk_t *, void *, ip_recv_attr_t *);

        /*
         * Soft reference to paired SA
         */
        uint32_t        ipsa_otherspi;
        netstack_t      *ipsa_netstack; /* Does not have a netstack_hold */

        uint8_t ipsa_mac_exempt;                /* MLS: mac exempt flag */
        uchar_t ipsa_opt_storage[IP_MAX_OPT_LENGTH];
} ipsa_t;

/*
 * ipsa_t address handling macros.  We want these to be inlined, and deal
 * with 32-bit words to avoid bcmp/bcopy calls.
 *
 * Assume we only have AF_INET and AF_INET6 addresses for now.  Also assume
 * that we have 32-bit alignment on everything.
 */
#define IPSA_IS_ADDR_UNSPEC(addr, fam) ((((uint32_t *)(addr))[0] == 0) && \
        (((fam) == AF_INET) || (((uint32_t *)(addr))[3] == 0 && \
        ((uint32_t *)(addr))[2] == 0 && ((uint32_t *)(addr))[1] == 0)))
#define IPSA_ARE_ADDR_EQUAL(addr1, addr2, fam) \
        ((((uint32_t *)(addr1))[0] == ((uint32_t *)(addr2))[0]) && \
        (((fam) == AF_INET) || \
        (((uint32_t *)(addr1))[3] == ((uint32_t *)(addr2))[3] && \
        ((uint32_t *)(addr1))[2] == ((uint32_t *)(addr2))[2] && \
        ((uint32_t *)(addr1))[1] == ((uint32_t *)(addr2))[1])))
#define IPSA_COPY_ADDR(dstaddr, srcaddr, fam) { \
        ((uint32_t *)(dstaddr))[0] = ((uint32_t *)(srcaddr))[0]; \
        if ((fam) == AF_INET6) {\
                ((uint32_t *)(dstaddr))[1] = ((uint32_t *)(srcaddr))[1]; \
                ((uint32_t *)(dstaddr))[2] = ((uint32_t *)(srcaddr))[2]; \
                ((uint32_t *)(dstaddr))[3] = ((uint32_t *)(srcaddr))[3]; } }

/*
 * ipsa_t reference hold/release macros.
 *
 * If you have a pointer, you REFHOLD.  If you are releasing a pointer, you
 * REFRELE.  An ipsa_t that is newly inserted into the table should have
 * a reference count of 1 (for the table's pointer), plus 1 more for every
 * pointer that is referencing the ipsa_t.
 */

#define IPSA_REFHOLD(ipsa) {                    \
        atomic_inc_32(&(ipsa)->ipsa_refcnt);    \
        ASSERT((ipsa)->ipsa_refcnt != 0);       \
}

/*
 * Decrement the reference count on the SA.
 * In architectures e.g sun4u, where atomic_add_32_nv is just
 * a cas, we need to maintain the right memory barrier semantics
 * as that of mutex_exit i.e all the loads and stores should complete
 * before the cas is executed. membar_exit() does that here.
 */

#define IPSA_REFRELE(ipsa) {                                    \
        ASSERT((ipsa)->ipsa_refcnt != 0);                       \
        membar_exit();                                          \
        if (atomic_dec_32_nv(&(ipsa)->ipsa_refcnt) == 0)        \
                ((ipsa)->ipsa_freefunc)(ipsa);                  \
}

/*
 * Security association hash macros and definitions.  For now, assume the
 * IPsec model, and hash outbounds on destination address, and inbounds on
 * SPI.
 */

#define IPSEC_DEFAULT_HASH_SIZE 256

#define INBOUND_HASH(sadb, spi) ((spi) % ((sadb)->sdb_hashsize))
#define OUTBOUND_HASH_V4(sadb, v4addr) ((v4addr) % ((sadb)->sdb_hashsize))
#define OUTBOUND_HASH_V6(sadb, v6addr) OUTBOUND_HASH_V4((sadb), \
        (*(uint32_t *)&(v6addr)) ^ (*(((uint32_t *)&(v6addr)) + 1)) ^ \
        (*(((uint32_t *)&(v6addr)) + 2)) ^ (*(((uint32_t *)&(v6addr)) + 3)))

/*
 * Syntactic sugar to find the appropriate hash bucket directly.
 */

#define INBOUND_BUCKET(sadb, spi) &(((sadb)->sdb_if)[INBOUND_HASH(sadb, spi)])
#define OUTBOUND_BUCKET_V4(sadb, v4addr) \
        &(((sadb)->sdb_of)[OUTBOUND_HASH_V4(sadb, v4addr)])
#define OUTBOUND_BUCKET_V6(sadb, v6addr) \
        &(((sadb)->sdb_of)[OUTBOUND_HASH_V6(sadb, v6addr)])

#define IPSA_F_PFS      SADB_SAFLAGS_PFS        /* PFS in use for this SA? */
#define IPSA_F_NOREPFLD SADB_SAFLAGS_NOREPLAY   /* No replay field, for */
                                                /* backward compat. */
#define IPSA_F_USED     SADB_X_SAFLAGS_USED     /* SA has been used. */
#define IPSA_F_UNIQUE   SADB_X_SAFLAGS_UNIQUE   /* SA is unique */
#define IPSA_F_AALG1    SADB_X_SAFLAGS_AALG1    /* Auth alg flag 1 */
#define IPSA_F_AALG2    SADB_X_SAFLAGS_AALG2    /* Auth alg flag 2 */
#define IPSA_F_EALG1    SADB_X_SAFLAGS_EALG1    /* Encrypt alg flag 1 */
#define IPSA_F_EALG2    SADB_X_SAFLAGS_EALG2    /* Encrypt alg flag 2 */

#define IPSA_F_ASYNC    0x200000                /* Call KCF asynchronously? */
#define IPSA_F_NATT_LOC SADB_X_SAFLAGS_NATT_LOC
#define IPSA_F_NATT_REM SADB_X_SAFLAGS_NATT_REM
#define IPSA_F_BEHIND_NAT SADB_X_SAFLAGS_NATTED
#define IPSA_F_NATT     (SADB_X_SAFLAGS_NATT_LOC | SADB_X_SAFLAGS_NATT_REM | \
        SADB_X_SAFLAGS_NATTED)
#define IPSA_F_CINVALID 0x40000         /* SA shouldn't be cached */
#define IPSA_F_PAIRED   SADB_X_SAFLAGS_PAIRED   /* SA is one of a pair */
#define IPSA_F_OUTBOUND SADB_X_SAFLAGS_OUTBOUND /* SA direction bit */
#define IPSA_F_INBOUND  SADB_X_SAFLAGS_INBOUND  /* SA direction bit */
#define IPSA_F_TUNNEL   SADB_X_SAFLAGS_TUNNEL
/*
 * These flags are only defined here to prevent a flag value collision.
 */
#define IPSA_F_COMBINED SADB_X_SAFLAGS_EALG1    /* Defined in pfkeyv2.h */
#define IPSA_F_COUNTERMODE SADB_X_SAFLAGS_EALG2 /* Defined in pfkeyv2.h */

/*
 * Sets of flags that are allowed to by set or modified by PF_KEY apps.
 */
#define AH_UPDATE_SETTABLE_FLAGS \
        (SADB_X_SAFLAGS_PAIRED | SADB_SAFLAGS_NOREPLAY | \
        SADB_X_SAFLAGS_OUTBOUND | SADB_X_SAFLAGS_INBOUND | \
        SADB_X_SAFLAGS_KM1 | SADB_X_SAFLAGS_KM2 | \
        SADB_X_SAFLAGS_KM3 | SADB_X_SAFLAGS_KM4)

/* AH can't set NAT flags (or even use NAT).  Add NAT flags to the ESP set. */
#define ESP_UPDATE_SETTABLE_FLAGS (AH_UPDATE_SETTABLE_FLAGS | IPSA_F_NATT)

#define AH_ADD_SETTABLE_FLAGS \
        (AH_UPDATE_SETTABLE_FLAGS | SADB_X_SAFLAGS_AALG1 | \
        SADB_X_SAFLAGS_AALG2 | SADB_X_SAFLAGS_TUNNEL | \
        SADB_SAFLAGS_NOREPLAY)

/* AH can't set NAT flags (or even use NAT).  Add NAT flags to the ESP set. */
#define ESP_ADD_SETTABLE_FLAGS (AH_ADD_SETTABLE_FLAGS | IPSA_F_NATT | \
        SADB_X_SAFLAGS_EALG1 | SADB_X_SAFLAGS_EALG2)



/* SA states are important for handling UPDATE PF_KEY messages. */
#define IPSA_STATE_LARVAL               SADB_SASTATE_LARVAL
#define IPSA_STATE_MATURE               SADB_SASTATE_MATURE
#define IPSA_STATE_DYING                SADB_SASTATE_DYING
#define IPSA_STATE_DEAD                 SADB_SASTATE_DEAD
#define IPSA_STATE_IDLE                 SADB_X_SASTATE_IDLE
#define IPSA_STATE_ACTIVE_ELSEWHERE     SADB_X_SASTATE_ACTIVE_ELSEWHERE

/*
 * NOTE:  If the document authors do things right in defining algorithms, we'll
 *        probably have flags for what all is here w.r.t. replay, ESP w/HMAC,
 *        etc.
 */

#define IPSA_T_ACQUIRE  SEC_TYPE_NONE   /* If this typed returned, sa needed */
#define IPSA_T_AH       SEC_TYPE_AH     /* IPsec AH association */
#define IPSA_T_ESP      SEC_TYPE_ESP    /* IPsec ESP association */

#define IPSA_AALG_NONE  SADB_AALG_NONE          /* No auth. algorithm */
#define IPSA_AALG_MD5H  SADB_AALG_MD5HMAC       /* MD5-HMAC algorithm */
#define IPSA_AALG_SHA1H SADB_AALG_SHA1HMAC      /* SHA1-HMAC algorithm */

#define IPSA_EALG_NONE          SADB_EALG_NONE  /* No encryption algorithm */
#define IPSA_EALG_DES_CBC       SADB_EALG_DESCBC
#define IPSA_EALG_3DES          SADB_EALG_3DESCBC

/*
 * Protect each ipsa_t bucket (and linkage) with a lock.
 */

typedef struct isaf_s {
        ipsa_t *isaf_ipsa;
        kmutex_t isaf_lock;
        uint64_t isaf_gen;
} isaf_t;

/*
 * ACQUIRE record.  If AH/ESP/whatever cannot find an association for outbound
 * traffic, it sends up an SADB_ACQUIRE message and create an ACQUIRE record.
 */

#define IPSACQ_MAXPACKETS 4     /* Number of packets that can be queued up */
                                /* waiting for an ACQUIRE to finish. */

typedef struct ipsacq_s {
        struct ipsacq_s *ipsacq_next;
        struct ipsacq_s **ipsacq_ptpn;
        kmutex_t *ipsacq_linklock;
        struct ipsec_policy_s  *ipsacq_policy;
        struct ipsec_action_s  *ipsacq_act;

        sa_family_t ipsacq_addrfam;     /* Address family. */
        sa_family_t ipsacq_inneraddrfam; /* Inner-packet address family. */
        int ipsacq_numpackets;          /* How many packets queued up so far. */
        uint32_t ipsacq_seq;            /* PF_KEY sequence number. */
        uint64_t ipsacq_unique_id;      /* Unique ID for SAs that need it. */

        kmutex_t ipsacq_lock;   /* Protects non-linkage fields. */
        time_t ipsacq_expire;   /* Wall-clock time when this record expires. */
        mblk_t *ipsacq_mp;      /* List of datagrams waiting for an SA. */

        /* These two point inside the last mblk inserted. */
        uint32_t *ipsacq_srcaddr;
        uint32_t *ipsacq_dstaddr;

        /* Cache these instead of point so we can mask off accordingly */
        uint32_t ipsacq_innersrc[IPSA_MAX_ADDRLEN];
        uint32_t ipsacq_innerdst[IPSA_MAX_ADDRLEN];

        /* These may change per-acquire. */
        uint16_t ipsacq_srcport;
        uint16_t ipsacq_dstport;
        uint8_t ipsacq_proto;
        uint8_t ipsacq_inner_proto;
        uint8_t ipsacq_innersrcpfx;
        uint8_t ipsacq_innerdstpfx;

        /* icmp type and code of triggering packet (if applicable) */
        uint8_t ipsacq_icmp_type;
        uint8_t ipsacq_icmp_code;

} ipsacq_t;

/*
 * Kernel-generated sequence numbers will be no less than 0x80000000 to
 * forestall any cretinous problems with manual keying accidentally updating
 * an ACQUIRE entry.
 */
#define IACQF_LOWEST_SEQ 0x80000000

#define SADB_AGE_INTERVAL_DEFAULT 8000

/*
 * ACQUIRE fanout.  Protect each linkage with a lock.
 */

typedef struct iacqf_s {
        ipsacq_t *iacqf_ipsacq;
        kmutex_t iacqf_lock;
} iacqf_t;

/*
 * A (network protocol, ipsec protocol) specific SADB.
 * (i.e., one each for {ah, esp} and {v4, v6}.
 *
 * Keep outbound assocs in a simple hash table for now.
 * One danger point, multiple SAs for a single dest will clog a bucket.
 * For the future, consider two-level hashing (2nd hash on IPC?), then probe.
 */

typedef struct sadb_s
{
        isaf_t  *sdb_of;
        isaf_t  *sdb_if;
        iacqf_t *sdb_acq;
        int     sdb_hashsize;
} sadb_t;

/*
 * A pair of SADB's (one for v4, one for v6), and related state.
 */

typedef struct sadbp_s
{
        uint32_t        s_satype;
        uint32_t        *s_acquire_timeout;
        sadb_t          s_v4;
        sadb_t          s_v6;
        uint32_t        s_addflags;
        uint32_t        s_updateflags;
} sadbp_t;

/*
 * A pair of SA's for a single connection, the structure contains a
 * pointer to a SA and the SA its paired with (opposite direction) as well
 * as the SA's respective hash buckets.
 */
typedef struct ipsap_s
{
        boolean_t       in_inbound_table;
        isaf_t          *ipsap_bucket;
        ipsa_t          *ipsap_sa_ptr;
        isaf_t          *ipsap_pbucket;
        ipsa_t          *ipsap_psa_ptr;
} ipsap_t;

typedef struct templist_s
{
        ipsa_t          *ipsa;
        struct templist_s       *next;
} templist_t;

/* Pointer to an all-zeroes IPv6 address. */
#define ALL_ZEROES_PTR  ((uint32_t *)&ipv6_all_zeros)

/*
 * Form unique id from ip_xmit_attr_t.
 */
#define SA_FORM_UNIQUE_ID(ixa)                                  \
        SA_UNIQUE_ID((ixa)->ixa_ipsec_src_port, (ixa)->ixa_ipsec_dst_port, \
            (((ixa)->ixa_flags & IXAF_IPSEC_TUNNEL) ?                   \
            ((ixa)->ixa_ipsec_inaf == AF_INET6 ? \
            IPPROTO_IPV6 : IPPROTO_ENCAP) :                             \
            (ixa)->ixa_ipsec_proto),                                    \
            (((ixa)->ixa_flags & IXAF_IPSEC_TUNNEL) ? \
            (ixa)->ixa_ipsec_proto : 0))

/*
 * This macro is used to generate unique ids (along with the addresses, both
 * inner and outer) for outbound datagrams that require unique SAs.
 *
 * N.B. casts and unsigned shift amounts discourage unwarranted
 * sign extension of dstport, proto, and iproto.
 *
 * Unique ID is 64-bits allocated as follows (pardon my big-endian bias):
 *
 *   6               4      43      33              11
 *   3               7      09      21              65              0
 *   +---------------*-------+-------+--------------+---------------+
 *   |  MUST-BE-ZERO |<iprot>|<proto>| <src port>   |  <dest port>  |
 *   +---------------*-------+-------+--------------+---------------+
 *
 * If there are inner addresses (tunnel mode) the ports come from the
 * inner addresses.  If there are no inner addresses, the ports come from
 * the outer addresses (transport mode).  Tunnel mode MUST have <proto>
 * set to either IPPROTO_ENCAP or IPPPROTO_IPV6.
 */
#define SA_UNIQUE_ID(srcport, dstport, proto, iproto)   \
        ((srcport) | ((uint64_t)(dstport) << 16U) | \
        ((uint64_t)(proto) << 32U) | ((uint64_t)(iproto) << 40U))

/*
 * SA_UNIQUE_MASK generates a mask value to use when comparing the unique value
 * from a packet to an SA.
 */

#define SA_UNIQUE_MASK(srcport, dstport, proto, iproto)         \
        SA_UNIQUE_ID((srcport != 0) ? 0xffff : 0,               \
                    (dstport != 0) ? 0xffff : 0,                \
                    (proto != 0) ? 0xff : 0,                    \
                    (iproto != 0) ? 0xff : 0)

/*
 * Decompose unique id back into its original fields.
 */
#define SA_IPROTO(ipsa) ((ipsa)->ipsa_unique_id>>40)&0xff
#define SA_PROTO(ipsa) ((ipsa)->ipsa_unique_id>>32)&0xff
#define SA_SRCPORT(ipsa) ((ipsa)->ipsa_unique_id & 0xffff)
#define SA_DSTPORT(ipsa) (((ipsa)->ipsa_unique_id >> 16) & 0xffff)

typedef struct ipsa_query_s ipsa_query_t;

typedef boolean_t (*ipsa_match_fn_t)(ipsa_query_t *, ipsa_t *);

#define IPSA_NMATCH     10

/*
 * SADB query structure.
 *
 * Provide a generalized mechanism for matching entries in the SADB;
 * one of these structures is initialized using sadb_form_query(),
 * and then can be used as a parameter to sadb_match_query() which returns
 * B_TRUE if the SA matches the query.
 *
 * Under the covers, sadb_form_query populates the matchers[] array with
 * functions which are called one at a time until one fails to match.
 */
struct ipsa_query_s {
        uint32_t req, match;
        sadb_address_t *srcext, *dstext;
        sadb_ident_t *srcid, *dstid;
        sadb_x_kmc_t *kmcext;
        sadb_sa_t *assoc;
        uint32_t spi;
        struct sockaddr_in *src;
        struct sockaddr_in6 *src6;
        struct sockaddr_in *dst;
        struct sockaddr_in6 *dst6;
        sa_family_t af;
        uint32_t *srcaddr, *dstaddr;
        uint32_t ifindex;
        uint32_t kmp;
        uint64_t kmc;
        char *didstr, *sidstr;
        uint16_t didtype, sidtype;
        sadbp_t *spp;
        sadb_t *sp;
        isaf_t  *inbound, *outbound;
        uint32_t outhash;
        uint32_t inhash;
        ipsa_match_fn_t matchers[IPSA_NMATCH];
};

#define IPSA_Q_SA               0x00000001
#define IPSA_Q_DST              0x00000002
#define IPSA_Q_SRC              0x00000004
#define IPSA_Q_DSTID            0x00000008
#define IPSA_Q_SRCID            0x00000010
#define IPSA_Q_KMC              0x00000020
#define IPSA_Q_INBOUND          0x00000040 /* fill in inbound isaf_t */
#define IPSA_Q_OUTBOUND         0x00000080 /* fill in outbound isaf_t */

int sadb_form_query(keysock_in_t *, uint32_t, uint32_t, ipsa_query_t *, int *);
boolean_t sadb_match_query(ipsa_query_t *q, ipsa_t *sa);


/*
 * All functions that return an ipsa_t will return it with IPSA_REFHOLD()
 * already called.
 */

/* SA retrieval (inbound and outbound) */
ipsa_t *ipsec_getassocbyspi(isaf_t *, uint32_t, uint32_t *, uint32_t *,
    sa_family_t);
ipsa_t *ipsec_getassocbyconn(isaf_t *, ip_xmit_attr_t *, uint32_t *, uint32_t *,
    sa_family_t, uint8_t);

/* SA insertion. */
int sadb_insertassoc(ipsa_t *, isaf_t *);

/* SA table construction and destruction. */
void sadbp_init(const char *name, sadbp_t *, int, int, netstack_t *);
void sadbp_flush(sadbp_t *, netstack_t *);
void sadbp_destroy(sadbp_t *, netstack_t *);

/* SA insertion and deletion. */
int sadb_insertassoc(ipsa_t *, isaf_t *);
void sadb_unlinkassoc(ipsa_t *);

/* Support routines to interface a keysock consumer to PF_KEY. */
mblk_t *sadb_keysock_out(minor_t);
int sadb_hardsoftchk(sadb_lifetime_t *, sadb_lifetime_t *, sadb_lifetime_t *);
void sadb_pfkey_echo(queue_t *, mblk_t *, sadb_msg_t *, struct keysock_in_s *,
    ipsa_t *);
void sadb_pfkey_error(queue_t *, mblk_t *, int, int, uint_t);
void sadb_keysock_hello(queue_t **, queue_t *, mblk_t *, void (*)(void *),
    void *, timeout_id_t *, int);
int sadb_addrcheck(queue_t *, mblk_t *, sadb_ext_t *, uint_t, netstack_t *);
boolean_t sadb_addrfix(keysock_in_t *, queue_t *, mblk_t *, netstack_t *);
int sadb_addrset(ire_t *);
int sadb_delget_sa(mblk_t *, keysock_in_t *, sadbp_t *, int *, queue_t *,
    uint8_t);

int sadb_purge_sa(mblk_t *, keysock_in_t *, sadb_t *, int *, queue_t *);
int sadb_common_add(queue_t *, mblk_t *, sadb_msg_t *,
    keysock_in_t *, isaf_t *, isaf_t *, ipsa_t *, boolean_t, boolean_t, int *,
    netstack_t *, sadbp_t *);
void sadb_set_usetime(ipsa_t *);
boolean_t sadb_age_bytes(queue_t *, ipsa_t *, uint64_t, boolean_t);
int sadb_update_sa(mblk_t *, keysock_in_t *, mblk_t **, sadbp_t *,
    int *, queue_t *, int (*)(mblk_t *, keysock_in_t *, int *, netstack_t *),
    netstack_t *, uint8_t);
void sadb_acquire(mblk_t *, ip_xmit_attr_t *, boolean_t, boolean_t);
void gcm_params_init(ipsa_t *, uchar_t *, uint_t, uchar_t *, ipsa_cm_mech_t *,
    crypto_data_t *);
void ccm_params_init(ipsa_t *, uchar_t *, uint_t, uchar_t *, ipsa_cm_mech_t *,
    crypto_data_t *);
void cbc_params_init(ipsa_t *, uchar_t *, uint_t, uchar_t *, ipsa_cm_mech_t *,
    crypto_data_t *);

void sadb_destroy_acquire(ipsacq_t *, netstack_t *);
struct ipsec_stack;
ipsa_t *sadb_getspi(keysock_in_t *, uint32_t, int *, netstack_t *);
void sadb_in_acquire(sadb_msg_t *, sadbp_t *, queue_t *, netstack_t *);
boolean_t sadb_replay_check(ipsa_t *, uint32_t);
boolean_t sadb_replay_peek(ipsa_t *, uint32_t);
int sadb_dump(queue_t *, mblk_t *, keysock_in_t *, sadb_t *);
void sadb_replay_delete(ipsa_t *);
void sadb_ager(sadb_t *, queue_t *, int, netstack_t *);

timeout_id_t sadb_retimeout(hrtime_t, queue_t *, void (*)(void *), void *,
    uint_t *, uint_t, short);
void sadb_sa_refrele(void *target);
mblk_t *sadb_set_lpkt(ipsa_t *, mblk_t *, ip_recv_attr_t *);
mblk_t *sadb_clear_lpkt(ipsa_t *);
void sadb_buf_pkt(ipsa_t *, mblk_t *, ip_recv_attr_t *);
void sadb_clear_buf_pkt(void *ipkt);

/* Note that buf_pkt is the product of ip_recv_attr_to_mblk() */
#define HANDLE_BUF_PKT(taskq, stack, dropper, buf_pkt)                  \
{                                                                       \
        if (buf_pkt != NULL) {                                          \
                if (taskq_dispatch(taskq, sadb_clear_buf_pkt,           \
                    (void *) buf_pkt, TQ_NOSLEEP) == 0) {               \
                    /* Dispatch was unsuccessful drop the packets. */   \
                        mblk_t          *tmp;                           \
                        while (buf_pkt != NULL) {                       \
                                tmp = buf_pkt->b_next;                  \
                                buf_pkt->b_next = NULL;                 \
                                buf_pkt = ip_recv_attr_free_mblk(buf_pkt); \
                                ip_drop_packet(buf_pkt, B_TRUE, NULL,   \
                                    DROPPER(stack,                      \
                                    ipds_sadb_inidle_timeout),          \
                                    &dropper);                          \
                                buf_pkt = tmp;                          \
                        }                                               \
                }                                                       \
        }                                                               \
}                                                                       \

/*
 * Two IPsec rate-limiting routines.
 */
/*PRINTFLIKE6*/
extern void ipsec_rl_strlog(netstack_t *, short, short, char,
    ushort_t, char *, ...)
    __KPRINTFLIKE(6);
extern void ipsec_assocfailure(short, short, char, ushort_t, char *, uint32_t,
    void *, int, netstack_t *);

/*
 * Algorithm types.
 */

#define IPSEC_NALGTYPES         2

typedef enum ipsec_algtype {
        IPSEC_ALG_AUTH = 0,
        IPSEC_ALG_ENCR = 1,
        IPSEC_ALG_ALL = 2
} ipsec_algtype_t;

/*
 * Definitions as per IPsec/ISAKMP DOI.
 */

#define IPSEC_MAX_ALGS          256
#define PROTO_IPSEC_AH          2
#define PROTO_IPSEC_ESP         3

/*
 * Common algorithm info.
 */
typedef struct ipsec_alginfo
{
        uint8_t         alg_id;
        uint8_t         alg_flags;
        uint16_t        *alg_key_sizes;
        uint16_t        *alg_block_sizes;
        uint16_t        *alg_params;
        uint16_t        alg_nkey_sizes;
        uint16_t        alg_ivlen;
        uint16_t        alg_icvlen;
        uint8_t         alg_saltlen;
        uint16_t        alg_nblock_sizes;
        uint16_t        alg_nparams;
        uint16_t        alg_minbits;
        uint16_t        alg_maxbits;
        uint16_t        alg_datalen;
        /*
         * increment: number of bits from keysize to keysize
         * default: # of increments from min to default key len
         */
        uint16_t        alg_increment;
        uint16_t        alg_default;
        uint16_t        alg_default_bits;
        /*
         * Min, max, and default key sizes effectively supported
         * by the encryption framework.
         */
        uint16_t        alg_ef_minbits;
        uint16_t        alg_ef_maxbits;
        uint16_t        alg_ef_default;
        uint16_t        alg_ef_default_bits;

        crypto_mech_type_t alg_mech_type;       /* KCF mechanism type */
        crypto_mech_name_t alg_mech_name;       /* KCF mechanism name */
} ipsec_alginfo_t;

#define alg_datalen alg_block_sizes[0]
#define ALG_VALID(_alg) ((_alg)->alg_flags & ALG_FLAG_VALID)

/*
 * Software crypto execution mode.
 */
typedef enum {
        IPSEC_ALGS_EXEC_SYNC = 0,
        IPSEC_ALGS_EXEC_ASYNC = 1
} ipsec_algs_exec_mode_t;

extern void ipsec_alg_reg(ipsec_algtype_t, ipsec_alginfo_t *, netstack_t *);
extern void ipsec_alg_unreg(ipsec_algtype_t, uint8_t, netstack_t *);
extern void ipsec_alg_fix_min_max(ipsec_alginfo_t *, ipsec_algtype_t,
    netstack_t *ns);
extern void alg_flag_check(ipsec_alginfo_t *);
extern void ipsec_alg_free(ipsec_alginfo_t *);
extern void ipsec_register_prov_update(void);
extern void sadb_alg_update(ipsec_algtype_t, uint8_t, boolean_t, netstack_t *);

/*
 * Context templates management.
 */

#define IPSEC_CTX_TMPL_ALLOC ((crypto_ctx_template_t)-1)
#define IPSEC_CTX_TMPL(_sa, _which, _type, _tmpl) {                     \
        if ((_tmpl = (_sa)->_which) == IPSEC_CTX_TMPL_ALLOC) {          \
                mutex_enter(&assoc->ipsa_lock);                         \
                if ((_sa)->_which == IPSEC_CTX_TMPL_ALLOC) {            \
                        ipsec_stack_t *ipss;                            \
                                                                        \
                        ipss = assoc->ipsa_netstack->netstack_ipsec;    \
                        rw_enter(&ipss->ipsec_alg_lock, RW_READER);     \
                        (void) ipsec_create_ctx_tmpl(_sa, _type);       \
                        rw_exit(&ipss->ipsec_alg_lock);                 \
                }                                                       \
                mutex_exit(&assoc->ipsa_lock);                          \
                if ((_tmpl = (_sa)->_which) == IPSEC_CTX_TMPL_ALLOC)    \
                        _tmpl = NULL;                                   \
        }                                                               \
}

extern int ipsec_create_ctx_tmpl(ipsa_t *, ipsec_algtype_t);
extern void ipsec_destroy_ctx_tmpl(ipsa_t *, ipsec_algtype_t);

/* key checking */
extern int ipsec_check_key(crypto_mech_type_t, sadb_key_t *, boolean_t, int *);

typedef struct ipsec_kstats_s {
        kstat_named_t esp_stat_in_requests;
        kstat_named_t esp_stat_in_discards;
        kstat_named_t esp_stat_lookup_failure;
        kstat_named_t ah_stat_in_requests;
        kstat_named_t ah_stat_in_discards;
        kstat_named_t ah_stat_lookup_failure;
        kstat_named_t sadb_acquire_maxpackets;
        kstat_named_t sadb_acquire_qhiwater;
} ipsec_kstats_t;

/*
 * (ipss)->ipsec_kstats is equal to (ipss)->ipsec_ksp->ks_data if
 * kstat_create_netstack for (ipss)->ipsec_ksp succeeds, but when it
 * fails, it will be NULL. Note this is done for all stack instances,
 * so it *could* fail. hence a non-NULL checking is done for
 * IP_ESP_BUMP_STAT, IP_AH_BUMP_STAT and IP_ACQUIRE_STAT
 */
#define IP_ESP_BUMP_STAT(ipss, x)                                       \
do {                                                                    \
        if ((ipss)->ipsec_kstats != NULL)                               \
                ((ipss)->ipsec_kstats->esp_stat_ ## x).value.ui64++;    \
_NOTE(CONSTCOND)                                                        \
} while (0)

#define IP_AH_BUMP_STAT(ipss, x)                                        \
do {                                                                    \
        if ((ipss)->ipsec_kstats != NULL)                               \
                ((ipss)->ipsec_kstats->ah_stat_ ## x).value.ui64++;     \
_NOTE(CONSTCOND)                                                        \
} while (0)

#define IP_ACQUIRE_STAT(ipss, val, new)                                 \
do {                                                                    \
        if ((ipss)->ipsec_kstats != NULL &&                             \
            ((uint64_t)(new)) >                                         \
            ((ipss)->ipsec_kstats->sadb_acquire_ ## val).value.ui64)    \
                ((ipss)->ipsec_kstats->sadb_acquire_ ## val).value.ui64 = \
                        ((uint64_t)(new));                              \
_NOTE(CONSTCOND)                                                        \
} while (0)


#ifdef  __cplusplus
}
#endif

#endif /* _INET_SADB_H */