loader: Minor cosmetic changes.

[unleashed.git] / kernel / os / strsubr.c

/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */
/*      Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T */
/*        All Rights Reserved   */


/*
 * Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
 * Use is subject to license terms.
 * Copyright (c) 2016 by Delphix. All rights reserved.
 */

#include <sys/types.h>
#include <sys/sysmacros.h>
#include <sys/param.h>
#include <sys/errno.h>
#include <sys/signal.h>
#include <sys/proc.h>
#include <sys/conf.h>
#include <sys/cred.h>
#include <sys/user.h>
#include <sys/vnode.h>
#include <sys/file.h>
#include <sys/session.h>
#include <sys/stream.h>
#include <sys/strsubr.h>
#include <sys/stropts.h>
#include <sys/poll.h>
#include <sys/systm.h>
#include <sys/cpuvar.h>
#include <sys/uio.h>
#include <sys/cmn_err.h>
#include <sys/priocntl.h>
#include <sys/procset.h>
#include <sys/vmem.h>
#include <sys/bitmap.h>
#include <sys/kmem.h>
#include <sys/siginfo.h>
#include <sys/vtrace.h>
#include <sys/callb.h>
#include <sys/debug.h>
#include <sys/modctl.h>
#include <sys/vmsystm.h>
#include <vm/page.h>
#include <sys/atomic.h>
#include <sys/suntpi.h>
#include <sys/strlog.h>
#include <sys/promif.h>
#include <sys/project.h>
#include <sys/vm.h>
#include <sys/taskq.h>
#include <sys/sunddi.h>
#include <sys/sunldi_impl.h>
#include <sys/strsun.h>
#include <sys/isa_defs.h>
#include <sys/multidata.h>
#include <sys/pattr.h>
#include <sys/strft.h>
#include <sys/fs/snode.h>
#include <sys/zone.h>
#include <sys/open.h>
#include <sys/sunldi.h>
#include <sys/sad.h>
#include <sys/netstack.h>

#define O_SAMESTR(q)    (((q)->q_next) && \
        (((q)->q_flag & QREADR) == ((q)->q_next->q_flag & QREADR)))

/*
 * WARNING:
 * The variables and routines in this file are private, belonging
 * to the STREAMS subsystem. These should not be used by modules
 * or drivers. Compatibility will not be guaranteed.
 */

/*
 * Id value used to distinguish between different multiplexor links.
 */
static int32_t lnk_id = 0;

#define STREAMS_LOPRI MINCLSYSPRI
static pri_t streams_lopri = STREAMS_LOPRI;

#define STRSTAT(x)      (str_statistics.x.value.ui64++)
typedef struct str_stat {
        kstat_named_t   sqenables;
        kstat_named_t   stenables;
        kstat_named_t   syncqservice;
        kstat_named_t   freebs;
        kstat_named_t   qwr_outer;
        kstat_named_t   rservice;
        kstat_named_t   strwaits;
        kstat_named_t   taskqfails;
        kstat_named_t   bufcalls;
        kstat_named_t   qhelps;
        kstat_named_t   qremoved;
        kstat_named_t   sqremoved;
        kstat_named_t   bcwaits;
        kstat_named_t   sqtoomany;
} str_stat_t;

static str_stat_t str_statistics = {
        { "sqenables",          KSTAT_DATA_UINT64 },
        { "stenables",          KSTAT_DATA_UINT64 },
        { "syncqservice",       KSTAT_DATA_UINT64 },
        { "freebs",             KSTAT_DATA_UINT64 },
        { "qwr_outer",          KSTAT_DATA_UINT64 },
        { "rservice",           KSTAT_DATA_UINT64 },
        { "strwaits",           KSTAT_DATA_UINT64 },
        { "taskqfails",         KSTAT_DATA_UINT64 },
        { "bufcalls",           KSTAT_DATA_UINT64 },
        { "qhelps",             KSTAT_DATA_UINT64 },
        { "qremoved",           KSTAT_DATA_UINT64 },
        { "sqremoved",          KSTAT_DATA_UINT64 },
        { "bcwaits",            KSTAT_DATA_UINT64 },
        { "sqtoomany",          KSTAT_DATA_UINT64 },
};

static kstat_t *str_kstat;

/*
 * qrunflag was used previously to control background scheduling of queues. It
 * is not used anymore, but kept here in case some module still wants to access
 * it via qready() and setqsched macros.
 */
char qrunflag;                  /*  Unused */

/*
 * Most of the streams scheduling is done via task queues. Task queues may fail
 * for non-sleep dispatches, so there are two backup threads servicing failed
 * requests for queues and syncqs. Both of these threads also service failed
 * dispatches freebs requests. Queues are put in the list specified by `qhead'
 * and `qtail' pointers, syncqs use `sqhead' and `sqtail' pointers and freebs
 * requests are put into `freebs_list' which has no tail pointer. All three
 * lists are protected by a single `service_queue' lock and use
 * `services_to_run' condition variable for signaling background threads. Use of
 * a single lock should not be a problem because it is only used under heavy
 * loads when task queues start to fail and at that time it may be a good idea
 * to throttle scheduling requests.
 *
 * NOTE: queues and syncqs should be scheduled by two separate threads because
 * queue servicing may be blocked waiting for a syncq which may be also
 * scheduled for background execution. This may create a deadlock when only one
 * thread is used for both.
 */

static taskq_t *streams_taskq;          /* Used for most STREAMS scheduling */

static kmutex_t service_queue;          /* protects all of servicing vars */
static kcondvar_t services_to_run;      /* wake up background service thread */
static kcondvar_t syncqs_to_run;        /* wake up background service thread */

/*
 * List of queues scheduled for background processing due to lack of resources
 * in the task queues. Protected by service_queue lock;
 */
static struct queue *qhead;
static struct queue *qtail;

/*
 * Same list for syncqs
 */
static syncq_t *sqhead;
static syncq_t *sqtail;

static mblk_t *freebs_list;     /* list of buffers to free */

/*
 * Backup threads for servicing queues and syncqs
 */
kthread_t *streams_qbkgrnd_thread;
kthread_t *streams_sqbkgrnd_thread;

/*
 * Bufcalls related variables.
 */
struct bclist   strbcalls;      /* list of waiting bufcalls */
kmutex_t        strbcall_lock;  /* protects bufcall list (strbcalls) */
kcondvar_t      strbcall_cv;    /* Signaling when a bufcall is added */
kmutex_t        bcall_monitor;  /* sleep/wakeup style monitor */
kcondvar_t      bcall_cv;       /* wait 'till executing bufcall completes */
kthread_t       *bc_bkgrnd_thread; /* Thread to service bufcall requests */

kmutex_t        strresources;   /* protects global resources */
kmutex_t        muxifier;       /* single-threads multiplexor creation */

static void     *str_stack_init(netstackid_t stackid, netstack_t *ns);
static void     str_stack_shutdown(netstackid_t stackid, void *arg);
static void     str_stack_fini(netstackid_t stackid, void *arg);

/*
 * run_queues is no longer used, but is kept in case some 3rd party
 * module/driver decides to use it.
 */
int run_queues = 0;

/*
 * sq_max_size is the depth of the syncq (in number of messages) before
 * qfill_syncq() starts QFULL'ing destination queues. As its primary
 * consumer - IP is no longer D_MTPERMOD, but there may be other
 * modules/drivers depend on this syncq flow control, we prefer to
 * choose a large number as the default value. For potential
 * performance gain, this value is tunable in /etc/system.
 */
int sq_max_size = 10000;

/*
 * The number of ciputctrl structures per syncq and stream we create when
 * needed.
 */
int n_ciputctrl;
int max_n_ciputctrl = 16;
/*
 * If n_ciputctrl is < min_n_ciputctrl don't even create ciputctrl_cache.
 */
int min_n_ciputctrl = 2;

/*
 * Per-driver/module syncqs
 * ========================
 *
 * For drivers/modules that use PERMOD or outer syncqs we keep a list of
 * perdm structures, new entries being added (and new syncqs allocated) when
 * setq() encounters a module/driver with a streamtab that it hasn't seen
 * before.
 * The reason for this mechanism is that some modules and drivers share a
 * common streamtab and it is necessary for those modules and drivers to also
 * share a common PERMOD syncq.
 *
 * perdm_list --> dm_str == streamtab_1
 *                dm_sq == syncq_1
 *                dm_ref
 *                dm_next --> dm_str == streamtab_2
 *                            dm_sq == syncq_2
 *                            dm_ref
 *                            dm_next --> ... NULL
 *
 * The dm_ref field is incremented for each new driver/module that takes
 * a reference to the perdm structure and hence shares the syncq.
 * References are held in the fmodsw_impl_t structure for each STREAMS module
 * or the dev_impl array (indexed by device major number) for each driver.
 *
 * perdm_list -> [dm_ref == 1] -> [dm_ref == 2] -> [dm_ref == 1] -> NULL
 *                   ^                 ^ ^               ^
 *                   |  ______________/  |               |
 *                   | /                 |               |
 * dev_impl:     ...|x|y|...          module A        module B
 *
 * When a module/driver is unloaded the reference count is decremented and,
 * when it falls to zero, the perdm structure is removed from the list and
 * the syncq is freed (see rele_dm()).
 */
perdm_t *perdm_list = NULL;
static krwlock_t perdm_rwlock;
cdevsw_impl_t *devimpl;

extern struct qinit strdata;
extern struct qinit stwdata;

static void runservice(queue_t *);
static void streams_bufcall_service(void);
static void streams_qbkgrnd_service(void);
static void streams_sqbkgrnd_service(void);
static syncq_t *new_syncq(void);
static void free_syncq(syncq_t *);
static void outer_insert(syncq_t *, syncq_t *);
static void outer_remove(syncq_t *, syncq_t *);
static void write_now(syncq_t *);
static void clr_qfull(queue_t *);
static void runbufcalls(void);
static void sqenable(syncq_t *);
static void sqfill_events(syncq_t *, queue_t *, mblk_t *, void (*)());
static void wait_q_syncq(queue_t *);
static void backenable_insertedq(queue_t *);

static void queue_service(queue_t *);
static void stream_service(stdata_t *);
static void syncq_service(syncq_t *);
static void qwriter_outer_service(syncq_t *);
static void mblk_free(mblk_t *);
#ifdef DEBUG
static int qprocsareon(queue_t *);
#endif

static void set_nfsrv_ptr(queue_t *, queue_t *, queue_t *, queue_t *);
static void reset_nfsrv_ptr(queue_t *, queue_t *);
void set_qfull(queue_t *);

static void sq_run_events(syncq_t *);
static int propagate_syncq(queue_t *);

static void     blocksq(syncq_t *, ushort_t, int);
static void     unblocksq(syncq_t *, ushort_t, int);
static int      dropsq(syncq_t *, uint16_t);
static void     emptysq(syncq_t *);
static sqlist_t *sqlist_alloc(struct stdata *, int);
static void     sqlist_free(sqlist_t *);
static sqlist_t *sqlist_build(queue_t *, struct stdata *, boolean_t);
static void     sqlist_insert(sqlist_t *, syncq_t *);
static void     sqlist_insertall(sqlist_t *, queue_t *);

static void     strsetuio(stdata_t *);

struct kmem_cache *stream_head_cache;
struct kmem_cache *queue_cache;
struct kmem_cache *syncq_cache;
struct kmem_cache *qband_cache;
struct kmem_cache *linkinfo_cache;
struct kmem_cache *ciputctrl_cache = NULL;

static linkinfo_t *linkinfo_list;

/* Global esballoc throttling queue */
static esb_queue_t system_esbq;

/* Array of esballoc throttling queues, of length esbq_nelem */
static esb_queue_t *volatile system_esbq_array;
static int esbq_nelem;
static kmutex_t esbq_lock;
static int esbq_log2_cpus_per_q = 0;

/* Scale the system_esbq length by setting number of CPUs per queue. */
uint_t esbq_cpus_per_q = 1;

/*
 * esballoc tunable parameters.
 */
int             esbq_max_qlen = 0x16;   /* throttled queue length */
clock_t         esbq_timeout = 0x8;     /* timeout to process esb queue */

/*
 * Routines to handle esballoc queueing.
 */
static void esballoc_process_queue(esb_queue_t *);
static void esballoc_enqueue_mblk(mblk_t *);
static void esballoc_timer(void *);
static void esballoc_set_timer(esb_queue_t *, clock_t);
static void esballoc_mblk_free(mblk_t *);

/*
 *  Qinit structure and Module_info structures
 *      for passthru read and write queues
 */

static void pass_wput(queue_t *, mblk_t *);
static queue_t *link_addpassthru(stdata_t *);
static void link_rempassthru(queue_t *);

struct  module_info passthru_info = {
        0,
        "passthru",
        0,
        INFPSZ,
        STRHIGH,
        STRLOW
};

struct  qinit passthru_rinit = {
        (int (*)())putnext,
        NULL,
        NULL,
        NULL,
        NULL,
        &passthru_info,
        NULL
};

struct  qinit passthru_winit = {
        (int (*)()) pass_wput,
        NULL,
        NULL,
        NULL,
        NULL,
        &passthru_info,
        NULL
};

/*
 * Verify correctness of list head/tail pointers.
 */
#define LISTCHECK(head, tail, link) {                           \
        EQUIV(head, tail);                                      \
        IMPLY(tail != NULL, tail->link == NULL);                \
}

/*
 * Enqueue a list element `el' in the end of a list denoted by `head' and `tail'
 * using a `link' field.
 */
#define ENQUEUE(el, head, tail, link) {                         \
        ASSERT(el->link == NULL);                               \
        LISTCHECK(head, tail, link);                            \
        if (head == NULL)                                       \
                head = el;                                      \
        else                                                    \
                tail->link = el;                                \
        tail = el;                                              \
}

/*
 * Dequeue the first element of the list denoted by `head' and `tail' pointers
 * using a `link' field and put result into `el'.
 */
#define DQ(el, head, tail, link) {                              \
        LISTCHECK(head, tail, link);                            \
        el = head;                                              \
        if (head != NULL) {                                     \
                head = head->link;                              \
                if (head == NULL)                               \
                        tail = NULL;                            \
                el->link = NULL;                                \
        }                                                       \
}

/*
 * Remove `el' from the list using `chase' and `curr' pointers and return result
 * in `succeed'.
 */
#define RMQ(el, head, tail, link, chase, curr, succeed) {       \
        LISTCHECK(head, tail, link);                            \
        chase = NULL;                                           \
        succeed = 0;                                            \
        for (curr = head; (curr != el) && (curr != NULL); curr = curr->link) \
                chase = curr;                                   \
        if (curr != NULL) {                                     \
                succeed = 1;                                    \
                ASSERT(curr == el);                             \
                if (chase != NULL)                              \
                        chase->link = curr->link;               \
                else                                            \
                        head = curr->link;                      \
                curr->link = NULL;                              \
                if (curr == tail)                               \
                        tail = chase;                           \
        }                                                       \
        LISTCHECK(head, tail, link);                            \
}

/* Handling of delayed messages on the inner syncq. */

/*
 * DEBUG versions should use function versions (to simplify tracing) and
 * non-DEBUG kernels should use macro versions.
 */

/*
 * Put a queue on the syncq list of queues.
 * Assumes SQLOCK held.
 */
#define SQPUT_Q(sq, qp)                                                 \
{                                                                       \
        ASSERT(MUTEX_HELD(SQLOCK(sq)));                                 \
        if (!(qp->q_sqflags & Q_SQQUEUED)) {                            \
                /* The queue should not be linked anywhere */           \
                ASSERT((qp->q_sqprev == NULL) && (qp->q_sqnext == NULL)); \
                /* Head and tail may only be NULL simultaneously */     \
                EQUIV(sq->sq_head, sq->sq_tail);                        \
                /* Queue may be only enqueued on its syncq */           \
                ASSERT(sq == qp->q_syncq);                              \
                /* Check the correctness of SQ_MESSAGES flag */         \
                EQUIV(sq->sq_head, (sq->sq_flags & SQ_MESSAGES));       \
                /* Sanity check first/last elements of the list */      \
                IMPLY(sq->sq_head != NULL, sq->sq_head->q_sqprev == NULL);\
                IMPLY(sq->sq_tail != NULL, sq->sq_tail->q_sqnext == NULL);\
                /*                                                      \
                 * Sanity check of priority field: empty queue should   \
                 * have zero priority                                   \
                 * and nqueues equal to zero.                           \
                 */                                                     \
                IMPLY(sq->sq_head == NULL, sq->sq_pri == 0);            \
                /* Sanity check of sq_nqueues field */                  \
                EQUIV(sq->sq_head, sq->sq_nqueues);                     \
                if (sq->sq_head == NULL) {                              \
                        sq->sq_head = sq->sq_tail = qp;                 \
                        sq->sq_flags |= SQ_MESSAGES;                    \
                } else if (qp->q_spri == 0) {                           \
                        qp->q_sqprev = sq->sq_tail;                     \
                        sq->sq_tail->q_sqnext = qp;                     \
                        sq->sq_tail = qp;                               \
                } else {                                                \
                        /*                                              \
                         * Put this queue in priority order: higher     \
                         * priority gets closer to the head.            \
                         */                                             \
                        queue_t **qpp = &sq->sq_tail;                   \
                        queue_t *qnext = NULL;                          \
                                                                        \
                        while (*qpp != NULL && qp->q_spri > (*qpp)->q_spri) { \
                                qnext = *qpp;                           \
                                qpp = &(*qpp)->q_sqprev;                \
                        }                                               \
                        qp->q_sqnext = qnext;                           \
                        qp->q_sqprev = *qpp;                            \
                        if (*qpp != NULL) {                             \
                                (*qpp)->q_sqnext = qp;                  \
                        } else {                                        \
                                sq->sq_head = qp;                       \
                                sq->sq_pri = sq->sq_head->q_spri;       \
                        }                                               \
                        *qpp = qp;                                      \
                }                                                       \
                qp->q_sqflags |= Q_SQQUEUED;                            \
                qp->q_sqtstamp = ddi_get_lbolt();                       \
                sq->sq_nqueues++;                                       \
        }                                                               \
}

/*
 * Remove a queue from the syncq list
 * Assumes SQLOCK held.
 */
#define SQRM_Q(sq, qp)                                                  \
        {                                                               \
                ASSERT(MUTEX_HELD(SQLOCK(sq)));                         \
                ASSERT(qp->q_sqflags & Q_SQQUEUED);                     \
                ASSERT(sq->sq_head != NULL && sq->sq_tail != NULL);     \
                ASSERT((sq->sq_flags & SQ_MESSAGES) != 0);              \
                /* Check that the queue is actually in the list */      \
                ASSERT(qp->q_sqnext != NULL || sq->sq_tail == qp);      \
                ASSERT(qp->q_sqprev != NULL || sq->sq_head == qp);      \
                ASSERT(sq->sq_nqueues != 0);                            \
                if (qp->q_sqprev == NULL) {                             \
                        /* First queue on list, make head q_sqnext */   \
                        sq->sq_head = qp->q_sqnext;                     \
                } else {                                                \
                        /* Make prev->next == next */                   \
                        qp->q_sqprev->q_sqnext = qp->q_sqnext;          \
                }                                                       \
                if (qp->q_sqnext == NULL) {                             \
                        /* Last queue on list, make tail sqprev */      \
                        sq->sq_tail = qp->q_sqprev;                     \
                } else {                                                \
                        /* Make next->prev == prev */                   \
                        qp->q_sqnext->q_sqprev = qp->q_sqprev;          \
                }                                                       \
                /* clear out references on this queue */                \
                qp->q_sqprev = qp->q_sqnext = NULL;                     \
                qp->q_sqflags &= ~Q_SQQUEUED;                           \
                /* If there is nothing queued, clear SQ_MESSAGES */     \
                if (sq->sq_head != NULL) {                              \
                        sq->sq_pri = sq->sq_head->q_spri;               \
                } else  {                                               \
                        sq->sq_flags &= ~SQ_MESSAGES;                   \
                        sq->sq_pri = 0;                                 \
                }                                                       \
                sq->sq_nqueues--;                                       \
                ASSERT(sq->sq_head != NULL || sq->sq_evhead != NULL ||  \
                    (sq->sq_flags & SQ_QUEUED) == 0);                   \
        }

/* Hide the definition from the header file. */
#ifdef SQPUT_MP
#undef SQPUT_MP
#endif

/*
 * Put a message on the queue syncq.
 * Assumes QLOCK held.
 */
#define SQPUT_MP(qp, mp)                                                \
        {                                                               \
                ASSERT(MUTEX_HELD(QLOCK(qp)));                          \
                ASSERT(qp->q_sqhead == NULL ||                          \
                    (qp->q_sqtail != NULL &&                            \
                    qp->q_sqtail->b_next == NULL));                     \
                qp->q_syncqmsgs++;                                      \
                ASSERT(qp->q_syncqmsgs != 0);   /* Wraparound */        \
                if (qp->q_sqhead == NULL) {                             \
                        qp->q_sqhead = qp->q_sqtail = mp;               \
                } else {                                                \
                        qp->q_sqtail->b_next = mp;                      \
                        qp->q_sqtail = mp;                              \
                }                                                       \
                ASSERT(qp->q_syncqmsgs > 0);                            \
                set_qfull(qp);                                          \
        }

#define SQ_PUTCOUNT_SETFAST_LOCKED(sq) {                                \
                ASSERT(MUTEX_HELD(SQLOCK(sq)));                         \
                if ((sq)->sq_ciputctrl != NULL) {                       \
                        int i;                                          \
                        int nlocks = (sq)->sq_nciputctrl;               \
                        ciputctrl_t *cip = (sq)->sq_ciputctrl;          \
                        ASSERT((sq)->sq_type & SQ_CIPUT);               \
                        for (i = 0; i <= nlocks; i++) {                 \
                                ASSERT(MUTEX_HELD(&cip[i].ciputctrl_lock)); \
                                cip[i].ciputctrl_count |= SQ_FASTPUT;   \
                        }                                               \
                }                                                       \
        }


#define SQ_PUTCOUNT_CLRFAST_LOCKED(sq) {                                \
                ASSERT(MUTEX_HELD(SQLOCK(sq)));                         \
                if ((sq)->sq_ciputctrl != NULL) {                       \
                        int i;                                          \
                        int nlocks = (sq)->sq_nciputctrl;               \
                        ciputctrl_t *cip = (sq)->sq_ciputctrl;          \
                        ASSERT((sq)->sq_type & SQ_CIPUT);               \
                        for (i = 0; i <= nlocks; i++) {                 \
                                ASSERT(MUTEX_HELD(&cip[i].ciputctrl_lock)); \
                                cip[i].ciputctrl_count &= ~SQ_FASTPUT;  \
                        }                                               \
                }                                                       \
        }

/*
 * Run service procedures for all queues in the stream head.
 */
#define STR_SERVICE(stp, q) {                                           \
        ASSERT(MUTEX_HELD(&stp->sd_qlock));                             \
        while (stp->sd_qhead != NULL) {                                 \
                DQ(q, stp->sd_qhead, stp->sd_qtail, q_link);            \
                ASSERT(stp->sd_nqueues > 0);                            \
                stp->sd_nqueues--;                                      \
                ASSERT(!(q->q_flag & QINSERVICE));                      \
                mutex_exit(&stp->sd_qlock);                             \
                queue_service(q);                                       \
                mutex_enter(&stp->sd_qlock);                            \
        }                                                               \
        ASSERT(stp->sd_nqueues == 0);                                   \
        ASSERT((stp->sd_qhead == NULL) && (stp->sd_qtail == NULL));     \
}

/*
 * Constructor/destructor routines for the stream head cache
 */
/* ARGSUSED */
static int
stream_head_constructor(void *buf, void *cdrarg, int kmflags)
{
        stdata_t *stp = buf;

        mutex_init(&stp->sd_lock, NULL, MUTEX_DEFAULT, NULL);
        mutex_init(&stp->sd_reflock, NULL, MUTEX_DEFAULT, NULL);
        mutex_init(&stp->sd_qlock, NULL, MUTEX_DEFAULT, NULL);
        cv_init(&stp->sd_monitor, NULL, CV_DEFAULT, NULL);
        cv_init(&stp->sd_iocmonitor, NULL, CV_DEFAULT, NULL);
        cv_init(&stp->sd_refmonitor, NULL, CV_DEFAULT, NULL);
        cv_init(&stp->sd_qcv, NULL, CV_DEFAULT, NULL);
        cv_init(&stp->sd_zcopy_wait, NULL, CV_DEFAULT, NULL);
        stp->sd_wrq = NULL;

        return (0);
}

/* ARGSUSED */
static void
stream_head_destructor(void *buf, void *cdrarg)
{
        stdata_t *stp = buf;

        mutex_destroy(&stp->sd_lock);
        mutex_destroy(&stp->sd_reflock);
        mutex_destroy(&stp->sd_qlock);
        cv_destroy(&stp->sd_monitor);
        cv_destroy(&stp->sd_iocmonitor);
        cv_destroy(&stp->sd_refmonitor);
        cv_destroy(&stp->sd_qcv);
        cv_destroy(&stp->sd_zcopy_wait);
}

/*
 * Constructor/destructor routines for the queue cache
 */
/* ARGSUSED */
static int
queue_constructor(void *buf, void *cdrarg, int kmflags)
{
        queinfo_t *qip = buf;
        queue_t *qp = &qip->qu_rqueue;
        queue_t *wqp = &qip->qu_wqueue;
        syncq_t *sq = &qip->qu_syncq;

        qp->q_first = NULL;
        qp->q_link = NULL;
        qp->q_count = 0;
        qp->q_mblkcnt = 0;
        qp->q_sqhead = NULL;
        qp->q_sqtail = NULL;
        qp->q_sqnext = NULL;
        qp->q_sqprev = NULL;
        qp->q_sqflags = 0;
        qp->q_rwcnt = 0;
        qp->q_spri = 0;

        mutex_init(QLOCK(qp), NULL, MUTEX_DEFAULT, NULL);
        cv_init(&qp->q_wait, NULL, CV_DEFAULT, NULL);

        wqp->q_first = NULL;
        wqp->q_link = NULL;
        wqp->q_count = 0;
        wqp->q_mblkcnt = 0;
        wqp->q_sqhead = NULL;
        wqp->q_sqtail = NULL;
        wqp->q_sqnext = NULL;
        wqp->q_sqprev = NULL;
        wqp->q_sqflags = 0;
        wqp->q_rwcnt = 0;
        wqp->q_spri = 0;

        mutex_init(QLOCK(wqp), NULL, MUTEX_DEFAULT, NULL);
        cv_init(&wqp->q_wait, NULL, CV_DEFAULT, NULL);

        sq->sq_head = NULL;
        sq->sq_tail = NULL;
        sq->sq_evhead = NULL;
        sq->sq_evtail = NULL;
        sq->sq_callbpend = NULL;
        sq->sq_outer = NULL;
        sq->sq_onext = NULL;
        sq->sq_oprev = NULL;
        sq->sq_next = NULL;
        sq->sq_svcflags = 0;
        sq->sq_servcount = 0;
        sq->sq_needexcl = 0;
        sq->sq_nqueues = 0;
        sq->sq_pri = 0;

        mutex_init(&sq->sq_lock, NULL, MUTEX_DEFAULT, NULL);
        cv_init(&sq->sq_wait, NULL, CV_DEFAULT, NULL);
        cv_init(&sq->sq_exitwait, NULL, CV_DEFAULT, NULL);

        return (0);
}

/* ARGSUSED */
static void
queue_destructor(void *buf, void *cdrarg)
{
        queinfo_t *qip = buf;
        queue_t *qp = &qip->qu_rqueue;
        queue_t *wqp = &qip->qu_wqueue;
        syncq_t *sq = &qip->qu_syncq;

        ASSERT(qp->q_sqhead == NULL);
        ASSERT(wqp->q_sqhead == NULL);
        ASSERT(qp->q_sqnext == NULL);
        ASSERT(wqp->q_sqnext == NULL);
        ASSERT(qp->q_rwcnt == 0);
        ASSERT(wqp->q_rwcnt == 0);

        mutex_destroy(&qp->q_lock);
        cv_destroy(&qp->q_wait);

        mutex_destroy(&wqp->q_lock);
        cv_destroy(&wqp->q_wait);

        mutex_destroy(&sq->sq_lock);
        cv_destroy(&sq->sq_wait);
        cv_destroy(&sq->sq_exitwait);
}

/*
 * Constructor/destructor routines for the syncq cache
 */
/* ARGSUSED */
static int
syncq_constructor(void *buf, void *cdrarg, int kmflags)
{
        syncq_t *sq = buf;

        bzero(buf, sizeof (syncq_t));

        mutex_init(&sq->sq_lock, NULL, MUTEX_DEFAULT, NULL);
        cv_init(&sq->sq_wait, NULL, CV_DEFAULT, NULL);
        cv_init(&sq->sq_exitwait, NULL, CV_DEFAULT, NULL);

        return (0);
}

/* ARGSUSED */
static void
syncq_destructor(void *buf, void *cdrarg)
{
        syncq_t *sq = buf;

        ASSERT(sq->sq_head == NULL);
        ASSERT(sq->sq_tail == NULL);
        ASSERT(sq->sq_evhead == NULL);
        ASSERT(sq->sq_evtail == NULL);
        ASSERT(sq->sq_callbpend == NULL);
        ASSERT(sq->sq_callbflags == 0);
        ASSERT(sq->sq_outer == NULL);
        ASSERT(sq->sq_onext == NULL);
        ASSERT(sq->sq_oprev == NULL);
        ASSERT(sq->sq_next == NULL);
        ASSERT(sq->sq_needexcl == 0);
        ASSERT(sq->sq_svcflags == 0);
        ASSERT(sq->sq_servcount == 0);
        ASSERT(sq->sq_nqueues == 0);
        ASSERT(sq->sq_pri == 0);
        ASSERT(sq->sq_count == 0);
        ASSERT(sq->sq_rmqcount == 0);
        ASSERT(sq->sq_cancelid == 0);
        ASSERT(sq->sq_ciputctrl == NULL);
        ASSERT(sq->sq_nciputctrl == 0);
        ASSERT(sq->sq_type == 0);
        ASSERT(sq->sq_flags == 0);

        mutex_destroy(&sq->sq_lock);
        cv_destroy(&sq->sq_wait);
        cv_destroy(&sq->sq_exitwait);
}

/* ARGSUSED */
static int
ciputctrl_constructor(void *buf, void *cdrarg, int kmflags)
{
        ciputctrl_t *cip = buf;
        int i;

        for (i = 0; i < n_ciputctrl; i++) {
                cip[i].ciputctrl_count = SQ_FASTPUT;
                mutex_init(&cip[i].ciputctrl_lock, NULL, MUTEX_DEFAULT, NULL);
        }

        return (0);
}

/* ARGSUSED */
static void
ciputctrl_destructor(void *buf, void *cdrarg)
{
        ciputctrl_t *cip = buf;
        int i;

        for (i = 0; i < n_ciputctrl; i++) {
                ASSERT(cip[i].ciputctrl_count & SQ_FASTPUT);
                mutex_destroy(&cip[i].ciputctrl_lock);
        }
}

/*
 * Init routine run from main at boot time.
 */
void
strinit(void)
{
        int ncpus = ((boot_max_ncpus == -1) ? max_ncpus : boot_max_ncpus);

        stream_head_cache = kmem_cache_create("stream_head_cache",
            sizeof (stdata_t), 0,
            stream_head_constructor, stream_head_destructor, NULL,
            NULL, NULL, 0);

        queue_cache = kmem_cache_create("queue_cache", sizeof (queinfo_t), 0,
            queue_constructor, queue_destructor, NULL, NULL, NULL, 0);

        syncq_cache = kmem_cache_create("syncq_cache", sizeof (syncq_t), 0,
            syncq_constructor, syncq_destructor, NULL, NULL, NULL, 0);

        qband_cache = kmem_cache_create("qband_cache",
            sizeof (qband_t), 0, NULL, NULL, NULL, NULL, NULL, 0);

        linkinfo_cache = kmem_cache_create("linkinfo_cache",
            sizeof (linkinfo_t), 0, NULL, NULL, NULL, NULL, NULL, 0);

        n_ciputctrl = ncpus;
        n_ciputctrl = 1 << highbit(n_ciputctrl - 1);
        ASSERT(n_ciputctrl >= 1);
        n_ciputctrl = MIN(n_ciputctrl, max_n_ciputctrl);
        if (n_ciputctrl >= min_n_ciputctrl) {
                ciputctrl_cache = kmem_cache_create("ciputctrl_cache",
                    sizeof (ciputctrl_t) * n_ciputctrl,
                    sizeof (ciputctrl_t), ciputctrl_constructor,
                    ciputctrl_destructor, NULL, NULL, NULL, 0);
        }

        streams_taskq = system_taskq;

        if (streams_taskq == NULL)
                panic("strinit: no memory for streams taskq!");

        bc_bkgrnd_thread = thread_create(NULL, 0,
            streams_bufcall_service, NULL, 0, &p0, TS_RUN, streams_lopri);

        streams_qbkgrnd_thread = thread_create(NULL, 0,
            streams_qbkgrnd_service, NULL, 0, &p0, TS_RUN, streams_lopri);

        streams_sqbkgrnd_thread = thread_create(NULL, 0,
            streams_sqbkgrnd_service, NULL, 0, &p0, TS_RUN, streams_lopri);

        /*
         * Create STREAMS kstats.
         */
        str_kstat = kstat_create("streams", 0, "strstat",
            "net", KSTAT_TYPE_NAMED,
            sizeof (str_statistics) / sizeof (kstat_named_t),
            KSTAT_FLAG_VIRTUAL);

        if (str_kstat != NULL) {
                str_kstat->ks_data = &str_statistics;
                kstat_install(str_kstat);
        }

        /*
         * TPI support routine initialisation.
         */
        tpi_init();

        /*
         * Handle to have autopush and persistent link information per
         * zone.
         * Note: uses shutdown hook instead of destroy hook so that the
         * persistent links can be torn down before the destroy hooks
         * in the TCP/IP stack are called.
         */
        netstack_register(NS_STR, str_stack_init, str_stack_shutdown,
            str_stack_fini);
}

void
str_sendsig(vnode_t *vp, int event, uchar_t band, int error)
{
        struct stdata *stp;

        ASSERT(vp->v_stream);
        stp = vp->v_stream;
        /* Have to hold sd_lock to prevent siglist from changing */
        mutex_enter(&stp->sd_lock);
        if (stp->sd_sigflags & event)
                strsendsig(stp->sd_siglist, event, band, error);
        mutex_exit(&stp->sd_lock);
}

/*
 * Send the "sevent" set of signals to a process.
 * This might send more than one signal if the process is registered
 * for multiple events. The caller should pass in an sevent that only
 * includes the events for which the process has registered.
 */
static void
dosendsig(proc_t *proc, int events, int sevent, k_siginfo_t *info,
    uchar_t band, int error)
{
        ASSERT(MUTEX_HELD(&proc->p_lock));

        info->si_band = 0;
        info->si_errno = 0;

        if (sevent & S_ERROR) {
                sevent &= ~S_ERROR;
                info->si_code = POLL_ERR;
                info->si_errno = error;
                TRACE_2(TR_FAC_STREAMS_FR, TR_STRSENDSIG,
                    "strsendsig:proc %p info %p", proc, info);
                sigaddq(proc, NULL, info, KM_NOSLEEP);
                info->si_errno = 0;
        }
        if (sevent & S_HANGUP) {
                sevent &= ~S_HANGUP;
                info->si_code = POLL_HUP;
                TRACE_2(TR_FAC_STREAMS_FR, TR_STRSENDSIG,
                    "strsendsig:proc %p info %p", proc, info);
                sigaddq(proc, NULL, info, KM_NOSLEEP);
        }
        if (sevent & S_HIPRI) {
                sevent &= ~S_HIPRI;
                info->si_code = POLL_PRI;
                TRACE_2(TR_FAC_STREAMS_FR, TR_STRSENDSIG,
                    "strsendsig:proc %p info %p", proc, info);
                sigaddq(proc, NULL, info, KM_NOSLEEP);
        }
        if (sevent & S_RDBAND) {
                sevent &= ~S_RDBAND;
                if (events & S_BANDURG)
                        sigtoproc(proc, NULL, SIGURG);
                else
                        sigtoproc(proc, NULL, SIGPOLL);
        }
        if (sevent & S_WRBAND) {
                sevent &= ~S_WRBAND;
                sigtoproc(proc, NULL, SIGPOLL);
        }
        if (sevent & S_INPUT) {
                sevent &= ~S_INPUT;
                info->si_code = POLL_IN;
                info->si_band = band;
                TRACE_2(TR_FAC_STREAMS_FR, TR_STRSENDSIG,
                    "strsendsig:proc %p info %p", proc, info);
                sigaddq(proc, NULL, info, KM_NOSLEEP);
                info->si_band = 0;
        }
        if (sevent & S_OUTPUT) {
                sevent &= ~S_OUTPUT;
                info->si_code = POLL_OUT;
                info->si_band = band;
                TRACE_2(TR_FAC_STREAMS_FR, TR_STRSENDSIG,
                    "strsendsig:proc %p info %p", proc, info);
                sigaddq(proc, NULL, info, KM_NOSLEEP);
                info->si_band = 0;
        }
        if (sevent & S_MSG) {
                sevent &= ~S_MSG;
                info->si_code = POLL_MSG;
                info->si_band = band;
                TRACE_2(TR_FAC_STREAMS_FR, TR_STRSENDSIG,
                    "strsendsig:proc %p info %p", proc, info);
                sigaddq(proc, NULL, info, KM_NOSLEEP);
                info->si_band = 0;
        }
        if (sevent & S_RDNORM) {
                sevent &= ~S_RDNORM;
                sigtoproc(proc, NULL, SIGPOLL);
        }
        if (sevent != 0) {
                panic("strsendsig: unknown event(s) %x", sevent);
        }
}

/*
 * Send SIGPOLL/SIGURG signal to all processes and process groups
 * registered on the given signal list that want a signal for at
 * least one of the specified events.
 *
 * Must be called with exclusive access to siglist (caller holding sd_lock).
 *
 * strioctl(I_SETSIG/I_ESETSIG) will only change siglist when holding
 * sd_lock and the ioctl code maintains a PID_HOLD on the pid structure
 * while it is in the siglist.
 *
 * For performance reasons (MP scalability) the code drops pidlock
 * when sending signals to a single process.
 * When sending to a process group the code holds
 * pidlock to prevent the membership in the process group from changing
 * while walking the p_pglink list.
 */
void
strsendsig(strsig_t *siglist, int event, uchar_t band, int error)
{
        strsig_t *ssp;
        k_siginfo_t info;
        struct pid *pidp;
        proc_t  *proc;

        info.si_signo = SIGPOLL;
        info.si_errno = 0;
        for (ssp = siglist; ssp; ssp = ssp->ss_next) {
                int sevent;

                sevent = ssp->ss_events & event;
                if (sevent == 0)
                        continue;

                if ((pidp = ssp->ss_pidp) == NULL) {
                        /* pid was released but still on event list */
                        continue;
                }


                if (ssp->ss_pid > 0) {
                        /*
                         * XXX This unfortunately still generates
                         * a signal when a fd is closed but
                         * the proc is active.
                         */
                        ASSERT(ssp->ss_pid == pidp->pid_id);

                        mutex_enter(&pidlock);
                        proc = prfind_zone(pidp->pid_id, ALL_ZONES);
                        if (proc == NULL) {
                                mutex_exit(&pidlock);
                                continue;
                        }
                        mutex_enter(&proc->p_lock);
                        mutex_exit(&pidlock);
                        dosendsig(proc, ssp->ss_events, sevent, &info,
                            band, error);
                        mutex_exit(&proc->p_lock);
                } else {
                        /*
                         * Send to process group. Hold pidlock across
                         * calls to dosendsig().
                         */
                        pid_t pgrp = -ssp->ss_pid;

                        mutex_enter(&pidlock);
                        proc = pgfind_zone(pgrp, ALL_ZONES);
                        while (proc != NULL) {
                                mutex_enter(&proc->p_lock);
                                dosendsig(proc, ssp->ss_events, sevent,
                                    &info, band, error);
                                mutex_exit(&proc->p_lock);
                                proc = proc->p_pglink;
                        }
                        mutex_exit(&pidlock);
                }
        }
}

/*
 * Attach a stream device or module.
 * qp is a read queue; the new queue goes in so its next
 * read ptr is the argument, and the write queue corresponding
 * to the argument points to this queue. Return 0 on success,
 * or a non-zero errno on failure.
 */
int
qattach(queue_t *qp, dev_t *devp, int oflag, cred_t *crp, fmodsw_impl_t *fp,
    boolean_t is_insert)
{
        major_t                 major;
        cdevsw_impl_t           *dp;
        struct streamtab        *str;
        queue_t                 *rq;
        queue_t                 *wrq;
        uint32_t                qflag;
        uint32_t                sqtype;
        perdm_t                 *dmp;
        int                     error;
        int                     sflag;

        rq = allocq();
        wrq = _WR(rq);
        STREAM(rq) = STREAM(wrq) = STREAM(qp);

        if (fp != NULL) {
                str = fp->f_str;
                qflag = fp->f_qflag;
                sqtype = fp->f_sqtype;
                dmp = fp->f_dmp;
                IMPLY((qflag & (QPERMOD | QMTOUTPERIM)), dmp != NULL);
                sflag = MODOPEN;

                /*
                 * stash away a pointer to the module structure so we can
                 * unref it in qdetach.
                 */
                rq->q_fp = fp;
        } else {
                ASSERT(!is_insert);

                major = getmajor(*devp);
                dp = &devimpl[major];

                str = dp->d_str;
                ASSERT(str == STREAMSTAB(major));

                qflag = dp->d_qflag;
                ASSERT(qflag & QISDRV);
                sqtype = dp->d_sqtype;

                /* create perdm_t if needed */
                if (NEED_DM(dp->d_dmp, qflag))
                        dp->d_dmp = hold_dm(str, qflag, sqtype);

                dmp = dp->d_dmp;
                sflag = 0;
        }

        TRACE_2(TR_FAC_STREAMS_FR, TR_QATTACH_FLAGS,
            "qattach:qflag == %X(%X)", qflag, *devp);

        /* setq might sleep in allocator - avoid holding locks. */
        setq(rq, str->st_rdinit, str->st_wrinit, dmp, qflag, sqtype, B_FALSE);

        /*
         * Before calling the module's open routine, set up the q_next
         * pointer for inserting a module in the middle of a stream.
         *
         * Note that we can always set _QINSERTING and set up q_next
         * pointer for both inserting and pushing a module.  Then there
         * is no need for the is_insert parameter.  In insertq(), called
         * by qprocson(), assume that q_next of the new module always points
         * to the correct queue and use it for insertion.  Everything should
         * work out fine.  But in the first release of _I_INSERT, we
         * distinguish between inserting and pushing to make sure that
         * pushing a module follows the same code path as before.
         */
        if (is_insert) {
                rq->q_flag |= _QINSERTING;
                rq->q_next = qp;
        }

        /*
         * If there is an outer perimeter get exclusive access during
         * the open procedure.  Bump up the reference count on the queue.
         */
        entersq(rq->q_syncq, SQ_OPENCLOSE);
        error = (*rq->q_qinfo->qi_qopen)(rq, devp, oflag, sflag, crp);
        if (error != 0)
                goto failed;
        leavesq(rq->q_syncq, SQ_OPENCLOSE);
        ASSERT(qprocsareon(rq));
        return (0);

failed:
        rq->q_flag &= ~_QINSERTING;
        if (backq(wrq) != NULL && backq(wrq)->q_next == wrq)
                qprocsoff(rq);
        leavesq(rq->q_syncq, SQ_OPENCLOSE);
        rq->q_next = wrq->q_next = NULL;
        qdetach(rq, 0, 0, crp, B_FALSE);
        return (error);
}

/*
 * Handle second open of stream. For modules, set the
 * last argument to MODOPEN and do not pass any open flags.
 * Ignore dummydev since this is not the first open.
 */
int
qreopen(queue_t *qp, dev_t *devp, int flag, cred_t *crp)
{
        int     error;
        dev_t dummydev;
        queue_t *wqp = _WR(qp);

        ASSERT(qp->q_flag & QREADR);
        entersq(qp->q_syncq, SQ_OPENCLOSE);

        dummydev = *devp;
        if (error = ((*qp->q_qinfo->qi_qopen)(qp, &dummydev,
            (wqp->q_next ? 0 : flag), (wqp->q_next ? MODOPEN : 0), crp))) {
                leavesq(qp->q_syncq, SQ_OPENCLOSE);
                mutex_enter(&STREAM(qp)->sd_lock);
                qp->q_stream->sd_flag |= STREOPENFAIL;
                mutex_exit(&STREAM(qp)->sd_lock);
                return (error);
        }
        leavesq(qp->q_syncq, SQ_OPENCLOSE);

        /*
         * successful open should have done qprocson()
         */
        ASSERT(qprocsareon(_RD(qp)));
        return (0);
}

/*
 * Detach a stream module or device.
 * If clmode == 1 then the module or driver was opened and its
 * close routine must be called. If clmode == 0, the module
 * or driver was never opened or the open failed, and so its close
 * should not be called.
 */
void
qdetach(queue_t *qp, int clmode, int flag, cred_t *crp, boolean_t is_remove)
{
        queue_t *wqp = _WR(qp);
        ASSERT(STREAM(qp)->sd_flag & (STRCLOSE|STWOPEN|STRPLUMB));

        if (STREAM_NEEDSERVICE(STREAM(qp)))
                stream_runservice(STREAM(qp));

        if (clmode) {
                /*
                 * Make sure that all the messages on the write side syncq are
                 * processed and nothing is left. Since we are closing, no new
                 * messages may appear there.
                 */
                wait_q_syncq(wqp);

                entersq(qp->q_syncq, SQ_OPENCLOSE);
                if (is_remove) {
                        mutex_enter(QLOCK(qp));
                        qp->q_flag |= _QREMOVING;
                        mutex_exit(QLOCK(qp));
                }
                (*qp->q_qinfo->qi_qclose)(qp, flag, crp);
                /*
                 * Check that qprocsoff() was actually called.
                 */
                ASSERT((qp->q_flag & QWCLOSE) && (wqp->q_flag & QWCLOSE));

                leavesq(qp->q_syncq, SQ_OPENCLOSE);
        } else {
                disable_svc(qp);
        }

        /*
         * Allow any threads blocked in entersq to proceed and discover
         * the QWCLOSE is set.
         * Note: This assumes that all users of entersq check QWCLOSE.
         * Currently runservice is the only entersq that can happen
         * after removeq has finished.
         * Removeq will have discarded all messages destined to the closing
         * pair of queues from the syncq.
         * NOTE: Calling a function inside an assert is unconventional.
         * However, it does not cause any problem since flush_syncq() does
         * not change any state except when it returns non-zero i.e.
         * when the assert will trigger.
         */
        ASSERT(flush_syncq(qp->q_syncq, qp) == 0);
        ASSERT(flush_syncq(wqp->q_syncq, wqp) == 0);
        ASSERT((qp->q_flag & QPERMOD) ||
            ((qp->q_syncq->sq_head == NULL) &&
            (wqp->q_syncq->sq_head == NULL)));

        /* release any fmodsw_impl_t structure held on behalf of the queue */
        ASSERT(qp->q_fp != NULL || qp->q_flag & QISDRV);
        if (qp->q_fp != NULL)
                fmodsw_rele(qp->q_fp);

        /* freeq removes us from the outer perimeter if any */
        freeq(qp);
}

/* Prevent service procedures from being called */
void
disable_svc(queue_t *qp)
{
        queue_t *wqp = _WR(qp);

        ASSERT(qp->q_flag & QREADR);
        mutex_enter(QLOCK(qp));
        qp->q_flag |= QWCLOSE;
        mutex_exit(QLOCK(qp));
        mutex_enter(QLOCK(wqp));
        wqp->q_flag |= QWCLOSE;
        mutex_exit(QLOCK(wqp));
}

/* Allow service procedures to be called again */
void
enable_svc(queue_t *qp)
{
        queue_t *wqp = _WR(qp);

        ASSERT(qp->q_flag & QREADR);
        mutex_enter(QLOCK(qp));
        qp->q_flag &= ~QWCLOSE;
        mutex_exit(QLOCK(qp));
        mutex_enter(QLOCK(wqp));
        wqp->q_flag &= ~QWCLOSE;
        mutex_exit(QLOCK(wqp));
}

/*
 * Remove queue from qhead/qtail if it is enabled.
 * Only reset QENAB if the queue was removed from the runlist.
 * A queue goes through 3 stages:
 *      It is on the service list and QENAB is set.
 *      It is removed from the service list but QENAB is still set.
 *      QENAB gets changed to QINSERVICE.
 *      QINSERVICE is reset (when the service procedure is done)
 * Thus we can not reset QENAB unless we actually removed it from the service
 * queue.
 */
void
remove_runlist(queue_t *qp)
{
        if (qp->q_flag & QENAB && qhead != NULL) {
                queue_t *q_chase;
                queue_t *q_curr;
                int removed;

                mutex_enter(&service_queue);
                RMQ(qp, qhead, qtail, q_link, q_chase, q_curr, removed);
                mutex_exit(&service_queue);
                if (removed) {
                        STRSTAT(qremoved);
                        qp->q_flag &= ~QENAB;
                }
        }
}


/*
 * Wait for any pending service processing to complete.
 * The removal of queues from the runlist is not atomic with the
 * clearing of the QENABLED flag and setting the INSERVICE flag.
 * consequently it is possible for remove_runlist in strclose
 * to not find the queue on the runlist but for it to be QENABLED
 * and not yet INSERVICE -> hence wait_svc needs to check QENABLED
 * as well as INSERVICE.
 */
void
wait_svc(queue_t *qp)
{
        queue_t *wqp = _WR(qp);

        ASSERT(qp->q_flag & QREADR);

        /*
         * Try to remove queues from qhead/qtail list.
         */
        if (qhead != NULL) {
                remove_runlist(qp);
                remove_runlist(wqp);
        }
        /*
         * Wait till the syncqs associated with the queue disappear from the
         * background processing list.
         * This only needs to be done for non-PERMOD perimeters since
         * for PERMOD perimeters the syncq may be shared and will only be freed
         * when the last module/driver is unloaded.
         * If for PERMOD perimeters queue was on the syncq list, removeq()
         * should call propagate_syncq() or drain_syncq() for it. Both of these
         * functions remove the queue from its syncq list, so sqthread will not
         * try to access the queue.
         */
        if (!(qp->q_flag & QPERMOD)) {
                syncq_t *rsq = qp->q_syncq;
                syncq_t *wsq = wqp->q_syncq;

                /*
                 * Disable rsq and wsq and wait for any background processing of
                 * syncq to complete.
                 */
                wait_sq_svc(rsq);
                if (wsq != rsq)
                        wait_sq_svc(wsq);
        }

        mutex_enter(QLOCK(qp));
        while (qp->q_flag & (QINSERVICE|QENAB))
                cv_wait(&qp->q_wait, QLOCK(qp));
        mutex_exit(QLOCK(qp));
        mutex_enter(QLOCK(wqp));
        while (wqp->q_flag & (QINSERVICE|QENAB))
                cv_wait(&wqp->q_wait, QLOCK(wqp));
        mutex_exit(QLOCK(wqp));
}

/*
 * Put ioctl data from userland buffer `arg' into the mblk chain `bp'.
 * `flag' must always contain either K_TO_K or U_TO_K; STR_NOSIG may
 * also be set, and is passed through to allocb_cred_wait().
 *
 * Returns errno on failure, zero on success.
 */
int
putiocd(mblk_t *bp, char *arg, int flag, cred_t *cr)
{
        mblk_t *tmp;
        ssize_t  count;
        int error = 0;

        ASSERT((flag & (U_TO_K | K_TO_K)) == U_TO_K ||
            (flag & (U_TO_K | K_TO_K)) == K_TO_K);

        if (bp->b_datap->db_type == M_IOCTL) {
                count = ((struct iocblk *)bp->b_rptr)->ioc_count;
        } else {
                ASSERT(bp->b_datap->db_type == M_COPYIN);
                count = ((struct copyreq *)bp->b_rptr)->cq_size;
        }
        /*
         * strdoioctl validates ioc_count, so if this assert fails it
         * cannot be due to user error.
         */
        ASSERT(count >= 0);

        if ((tmp = allocb_cred_wait(count, (flag & STR_NOSIG), &error, cr,
            curproc->p_pid)) == NULL) {
                return (error);
        }
        error = strcopyin(arg, tmp->b_wptr, count, flag & (U_TO_K|K_TO_K));
        if (error != 0) {
                freeb(tmp);
                return (error);
        }
        DB_CPID(tmp) = curproc->p_pid;
        tmp->b_wptr += count;
        bp->b_cont = tmp;

        return (0);
}

/*
 * Copy ioctl data to user-land. Return non-zero errno on failure,
 * 0 for success.
 */
int
getiocd(mblk_t *bp, char *arg, int copymode)
{
        ssize_t count;
        size_t  n;
        int     error;

        if (bp->b_datap->db_type == M_IOCACK)
                count = ((struct iocblk *)bp->b_rptr)->ioc_count;
        else {
                ASSERT(bp->b_datap->db_type == M_COPYOUT);
                count = ((struct copyreq *)bp->b_rptr)->cq_size;
        }
        ASSERT(count >= 0);

        for (bp = bp->b_cont; bp && count;
            count -= n, bp = bp->b_cont, arg += n) {
                n = MIN(count, bp->b_wptr - bp->b_rptr);
                error = strcopyout(bp->b_rptr, arg, n, copymode);
                if (error)
                        return (error);
        }
        ASSERT(count == 0);
        return (0);
}

/*
 * Allocate a linkinfo entry given the write queue of the
 * bottom module of the top stream and the write queue of the
 * stream head of the bottom stream.
 */
linkinfo_t *
alloclink(queue_t *qup, queue_t *qdown, file_t *fpdown)
{
        linkinfo_t *linkp;

        linkp = kmem_cache_alloc(linkinfo_cache, KM_SLEEP);

        linkp->li_lblk.l_qtop = qup;
        linkp->li_lblk.l_qbot = qdown;
        linkp->li_fpdown = fpdown;

        mutex_enter(&strresources);
        linkp->li_next = linkinfo_list;
        linkp->li_prev = NULL;
        if (linkp->li_next)
                linkp->li_next->li_prev = linkp;
        linkinfo_list = linkp;
        linkp->li_lblk.l_index = ++lnk_id;
        ASSERT(lnk_id != 0);    /* this should never wrap in practice */
        mutex_exit(&strresources);

        return (linkp);
}

/*
 * Free a linkinfo entry.
 */
void
lbfree(linkinfo_t *linkp)
{
        mutex_enter(&strresources);
        if (linkp->li_next)
                linkp->li_next->li_prev = linkp->li_prev;
        if (linkp->li_prev)
                linkp->li_prev->li_next = linkp->li_next;
        else
                linkinfo_list = linkp->li_next;
        mutex_exit(&strresources);

        kmem_cache_free(linkinfo_cache, linkp);
}

/*
 * Check for a potential linking cycle.
 * Return 1 if a link will result in a cycle,
 * and 0 otherwise.
 */
int
linkcycle(stdata_t *upstp, stdata_t *lostp, str_stack_t *ss)
{
        struct mux_node *np;
        struct mux_edge *ep;
        int i;
        major_t lomaj;
        major_t upmaj;
        /*
         * if the lower stream is a pipe/FIFO, return, since link
         * cycles can not happen on pipes/FIFOs
         */
        if (lostp->sd_vnode->v_type == VFIFO)
                return (0);

        for (i = 0; i < ss->ss_devcnt; i++) {
                np = &ss->ss_mux_nodes[i];
                MUX_CLEAR(np);
        }
        lomaj = getmajor(lostp->sd_vnode->v_rdev);
        upmaj = getmajor(upstp->sd_vnode->v_rdev);
        np = &ss->ss_mux_nodes[lomaj];
        for (;;) {
                if (!MUX_DIDVISIT(np)) {
                        if (np->mn_imaj == upmaj)
                                return (1);
                        if (np->mn_outp == NULL) {
                                MUX_VISIT(np);
                                if (np->mn_originp == NULL)
                                        return (0);
                                np = np->mn_originp;
                                continue;
                        }
                        MUX_VISIT(np);
                        np->mn_startp = np->mn_outp;
                } else {
                        if (np->mn_startp == NULL) {
                                if (np->mn_originp == NULL)
                                        return (0);
                                else {
                                        np = np->mn_originp;
                                        continue;
                                }
                        }
                        /*
                         * If ep->me_nodep is a FIFO (me_nodep == NULL),
                         * ignore the edge and move on. ep->me_nodep gets
                         * set to NULL in mux_addedge() if it is a FIFO.
                         *
                         */
                        ep = np->mn_startp;
                        np->mn_startp = ep->me_nextp;
                        if (ep->me_nodep == NULL)
                                continue;
                        ep->me_nodep->mn_originp = np;
                        np = ep->me_nodep;
                }
        }
}

/*
 * Find linkinfo entry corresponding to the parameters.
 */
linkinfo_t *
findlinks(stdata_t *stp, int index, int type, str_stack_t *ss)
{
        linkinfo_t *linkp;
        struct mux_edge *mep;
        struct mux_node *mnp;
        queue_t *qup;

        mutex_enter(&strresources);
        if ((type & LINKTYPEMASK) == LINKNORMAL) {
                qup = getendq(stp->sd_wrq);
                for (linkp = linkinfo_list; linkp; linkp = linkp->li_next) {
                        if ((qup == linkp->li_lblk.l_qtop) &&
                            (!index || (index == linkp->li_lblk.l_index))) {
                                mutex_exit(&strresources);
                                return (linkp);
                        }
                }
        } else {
                ASSERT((type & LINKTYPEMASK) == LINKPERSIST);
                mnp = &ss->ss_mux_nodes[getmajor(stp->sd_vnode->v_rdev)];
                mep = mnp->mn_outp;
                while (mep) {
                        if ((index == 0) || (index == mep->me_muxid))
                                break;
                        mep = mep->me_nextp;
                }
                if (!mep) {
                        mutex_exit(&strresources);
                        return (NULL);
                }
                for (linkp = linkinfo_list; linkp; linkp = linkp->li_next) {
                        if ((!linkp->li_lblk.l_qtop) &&
                            (mep->me_muxid == linkp->li_lblk.l_index)) {
                                mutex_exit(&strresources);
                                return (linkp);
                        }
                }
        }
        mutex_exit(&strresources);
        return (NULL);
}

/*
 * Given a queue ptr, follow the chain of q_next pointers until you reach the
 * last queue on the chain and return it.
 */
queue_t *
getendq(queue_t *q)
{
        ASSERT(q != NULL);
        while (_SAMESTR(q))
                q = q->q_next;
        return (q);
}

/*
 * Wait for the syncq count to drop to zero.
 * sq could be either outer or inner.
 */

static void
wait_syncq(syncq_t *sq)
{
        uint16_t count;

        mutex_enter(SQLOCK(sq));
        count = sq->sq_count;
        SQ_PUTLOCKS_ENTER(sq);
        SUM_SQ_PUTCOUNTS(sq, count);
        while (count != 0) {
                sq->sq_flags |= SQ_WANTWAKEUP;
                SQ_PUTLOCKS_EXIT(sq);
                cv_wait(&sq->sq_wait, SQLOCK(sq));
                count = sq->sq_count;
                SQ_PUTLOCKS_ENTER(sq);
                SUM_SQ_PUTCOUNTS(sq, count);
        }
        SQ_PUTLOCKS_EXIT(sq);
        mutex_exit(SQLOCK(sq));
}

/*
 * Wait while there are any messages for the queue in its syncq.
 */
static void
wait_q_syncq(queue_t *q)
{
        if ((q->q_sqflags & Q_SQQUEUED) || (q->q_syncqmsgs > 0)) {
                syncq_t *sq = q->q_syncq;

                mutex_enter(SQLOCK(sq));
                while ((q->q_sqflags & Q_SQQUEUED) || (q->q_syncqmsgs > 0)) {
                        sq->sq_flags |= SQ_WANTWAKEUP;
                        cv_wait(&sq->sq_wait, SQLOCK(sq));
                }
                mutex_exit(SQLOCK(sq));
        }
}


int
mlink_file(vnode_t *vp, int cmd, struct file *fpdown, cred_t *crp, int *rvalp,
    int lhlink)
{
        struct stdata *stp;
        struct strioctl strioc;
        struct linkinfo *linkp;
        struct stdata *stpdown;
        struct streamtab *str;
        queue_t *passq;
        syncq_t *passyncq;
        queue_t *rq;
        cdevsw_impl_t *dp;
        uint32_t qflag;
        uint32_t sqtype;
        perdm_t *dmp;
        int error = 0;
        netstack_t *ns;
        str_stack_t *ss;

        stp = vp->v_stream;
        TRACE_1(TR_FAC_STREAMS_FR,
            TR_I_LINK, "I_LINK/I_PLINK:stp %p", stp);
        /*
         * Test for invalid upper stream
         */
        if (stp->sd_flag & STRHUP) {
                return (ENXIO);
        }
        if (vp->v_type == VFIFO) {
                return (EINVAL);
        }
        if (stp->sd_strtab == NULL) {
                return (EINVAL);
        }
        if (!stp->sd_strtab->st_muxwinit) {
                return (EINVAL);
        }
        if (fpdown == NULL) {
                return (EBADF);
        }
        ns = netstack_find_by_cred(crp);
        ASSERT(ns != NULL);
        ss = ns->netstack_str;
        ASSERT(ss != NULL);

        if (getmajor(stp->sd_vnode->v_rdev) >= ss->ss_devcnt) {
                netstack_rele(ss->ss_netstack);
                return (EINVAL);
        }
        mutex_enter(&muxifier);
        if (stp->sd_flag & STPLEX) {
                mutex_exit(&muxifier);
                netstack_rele(ss->ss_netstack);
                return (ENXIO);
        }

        /*
         * Test for invalid lower stream.
         * The check for the v_type != VFIFO and having a major
         * number not >= devcnt is done to avoid problems with
         * adding mux_node entry past the end of mux_nodes[].
         * For FIFO's we don't add an entry so this isn't a
         * problem.
         */
        if (((stpdown = fpdown->f_vnode->v_stream) == NULL) ||
            (stpdown == stp) || (stpdown->sd_flag &
            (STPLEX|STRHUP|STRDERR|STWRERR|IOCWAIT|STRPLUMB)) ||
            ((stpdown->sd_vnode->v_type != VFIFO) &&
            (getmajor(stpdown->sd_vnode->v_rdev) >= ss->ss_devcnt)) ||
            linkcycle(stp, stpdown, ss)) {
                mutex_exit(&muxifier);
                netstack_rele(ss->ss_netstack);
                return (EINVAL);
        }
        TRACE_1(TR_FAC_STREAMS_FR,
            TR_STPDOWN, "stpdown:%p", stpdown);
        rq = getendq(stp->sd_wrq);
        if (cmd == I_PLINK)
                rq = NULL;

        linkp = alloclink(rq, stpdown->sd_wrq, fpdown);

        strioc.ic_cmd = cmd;
        strioc.ic_timout = INFTIM;
        strioc.ic_len = sizeof (struct linkblk);
        strioc.ic_dp = (char *)&linkp->li_lblk;

        /*
         * STRPLUMB protects plumbing changes and should be set before
         * link_addpassthru()/link_rempassthru() are called, so it is set here
         * and cleared in the end of mlink when passthru queue is removed.
         * Setting of STRPLUMB prevents reopens of the stream while passthru
         * queue is in-place (it is not a proper module and doesn't have open
         * entry point).
         *
         * STPLEX prevents any threads from entering the stream from above. It
         * can't be set before the call to link_addpassthru() because putnext
         * from below may cause stream head I/O routines to be called and these
         * routines assert that STPLEX is not set. After link_addpassthru()
         * nothing may come from below since the pass queue syncq is blocked.
         * Note also that STPLEX should be cleared before the call to
         * link_rempassthru() since when messages start flowing to the stream
         * head (e.g. because of message propagation from the pass queue) stream
         * head I/O routines may be called with STPLEX flag set.
         *
         * When STPLEX is set, nothing may come into the stream from above and
         * it is safe to do a setq which will change stream head. So, the
         * correct sequence of actions is:
         *
         * 1) Set STRPLUMB
         * 2) Call link_addpassthru()
         * 3) Set STPLEX
         * 4) Call setq and update the stream state
         * 5) Clear STPLEX
         * 6) Call link_rempassthru()
         * 7) Clear STRPLUMB
         *
         * The same sequence applies to munlink() code.
         */
        mutex_enter(&stpdown->sd_lock);
        stpdown->sd_flag |= STRPLUMB;
        mutex_exit(&stpdown->sd_lock);
        /*
         * Add passthru queue below lower mux. This will block
         * syncqs of lower muxs read queue during I_LINK/I_UNLINK.
         */
        passq = link_addpassthru(stpdown);

        mutex_enter(&stpdown->sd_lock);
        stpdown->sd_flag |= STPLEX;
        mutex_exit(&stpdown->sd_lock);

        rq = _RD(stpdown->sd_wrq);
        /*
         * There may be messages in the streamhead's syncq due to messages
         * that arrived before link_addpassthru() was done. To avoid
         * background processing of the syncq happening simultaneous with
         * setq processing, we disable the streamhead syncq and wait until
         * existing background thread finishes working on it.
         */
        wait_sq_svc(rq->q_syncq);
        passyncq = passq->q_syncq;
        if (!(passyncq->sq_flags & SQ_BLOCKED))
                blocksq(passyncq, SQ_BLOCKED, 0);

        ASSERT((rq->q_flag & QMT_TYPEMASK) == QMTSAFE);
        ASSERT(rq->q_syncq == SQ(rq) && _WR(rq)->q_syncq == SQ(rq));
        rq->q_ptr = _WR(rq)->q_ptr = NULL;

        /* setq might sleep in allocator - avoid holding locks. */
        /* Note: we are holding muxifier here. */

        str = stp->sd_strtab;
        dp = &devimpl[getmajor(vp->v_rdev)];
        ASSERT(dp->d_str == str);

        qflag = dp->d_qflag;
        sqtype = dp->d_sqtype;

        /* create perdm_t if needed */
        if (NEED_DM(dp->d_dmp, qflag))
                dp->d_dmp = hold_dm(str, qflag, sqtype);

        dmp = dp->d_dmp;

        setq(rq, str->st_muxrinit, str->st_muxwinit, dmp, qflag, sqtype,
            B_TRUE);

        /*
         * XXX Remove any "odd" messages from the queue.
         * Keep only M_DATA, M_PROTO, M_PCPROTO.
         */
        error = strdoioctl(stp, &strioc, FNATIVE,
            K_TO_K | STR_NOERROR | STR_NOSIG, crp, rvalp);
        if (error != 0) {
                lbfree(linkp);

                if (!(passyncq->sq_flags & SQ_BLOCKED))
                        blocksq(passyncq, SQ_BLOCKED, 0);
                /*
                 * Restore the stream head queue and then remove
                 * the passq. Turn off STPLEX before we turn on
                 * the stream by removing the passq.
                 */
                rq->q_ptr = _WR(rq)->q_ptr = stpdown;
                setq(rq, &strdata, &stwdata, NULL, QMTSAFE, SQ_CI|SQ_CO,
                    B_TRUE);

                mutex_enter(&stpdown->sd_lock);
                stpdown->sd_flag &= ~STPLEX;
                mutex_exit(&stpdown->sd_lock);

                link_rempassthru(passq);

                mutex_enter(&stpdown->sd_lock);
                stpdown->sd_flag &= ~STRPLUMB;
                /* Wakeup anyone waiting for STRPLUMB to clear. */
                cv_broadcast(&stpdown->sd_monitor);
                mutex_exit(&stpdown->sd_lock);

                mutex_exit(&muxifier);
                netstack_rele(ss->ss_netstack);
                return (error);
        }
        mutex_enter(&fpdown->f_tlock);
        fpdown->f_count++;
        mutex_exit(&fpdown->f_tlock);

        /*
         * if we've made it here the linkage is all set up so we should also
         * set up the layered driver linkages
         */

        ASSERT((cmd == I_LINK) || (cmd == I_PLINK));
        if (cmd == I_LINK) {
                ldi_mlink_fp(stp, fpdown, lhlink, LINKNORMAL);
        } else {
                ldi_mlink_fp(stp, fpdown, lhlink, LINKPERSIST);
        }

        link_rempassthru(passq);

        mux_addedge(stp, stpdown, linkp->li_lblk.l_index, ss);

        /*
         * Mark the upper stream as having dependent links
         * so that strclose can clean it up.
         */
        if (cmd == I_LINK) {
                mutex_enter(&stp->sd_lock);
                stp->sd_flag |= STRHASLINKS;
                mutex_exit(&stp->sd_lock);
        }
        /*
         * Wake up any other processes that may have been
         * waiting on the lower stream. These will all
         * error out.
         */
        mutex_enter(&stpdown->sd_lock);
        /* The passthru module is removed so we may release STRPLUMB */
        stpdown->sd_flag &= ~STRPLUMB;
        cv_broadcast(&rq->q_wait);
        cv_broadcast(&_WR(rq)->q_wait);
        cv_broadcast(&stpdown->sd_monitor);
        mutex_exit(&stpdown->sd_lock);
        mutex_exit(&muxifier);
        *rvalp = linkp->li_lblk.l_index;
        netstack_rele(ss->ss_netstack);
        return (0);
}

int
mlink(vnode_t *vp, int cmd, int arg, cred_t *crp, int *rvalp, int lhlink)
{
        int             ret;
        struct file     *fpdown;

        fpdown = getf(arg);
        ret = mlink_file(vp, cmd, fpdown, crp, rvalp, lhlink);
        if (fpdown != NULL)
                releasef(arg);
        return (ret);
}

/*
 * Unlink a multiplexor link. Stp is the controlling stream for the
 * link, and linkp points to the link's entry in the linkinfo list.
 * The muxifier lock must be held on entry and is dropped on exit.
 *
 * NOTE : Currently it is assumed that mux would process all the messages
 * sitting on it's queue before ACKing the UNLINK. It is the responsibility
 * of the mux to handle all the messages that arrive before UNLINK.
 * If the mux has to send down messages on its lower stream before
 * ACKing I_UNLINK, then it *should* know to handle messages even
 * after the UNLINK is acked (actually it should be able to handle till we
 * re-block the read side of the pass queue here). If the mux does not
 * open up the lower stream, any messages that arrive during UNLINK
 * will be put in the stream head. In the case of lower stream opening
 * up, some messages might land in the stream head depending on when
 * the message arrived and when the read side of the pass queue was
 * re-blocked.
 */
int
munlink(stdata_t *stp, linkinfo_t *linkp, int flag, cred_t *crp, int *rvalp,
    str_stack_t *ss)
{
        struct strioctl strioc;
        struct stdata *stpdown;
        queue_t *rq, *wrq;
        queue_t *passq;
        syncq_t *passyncq;
        int error = 0;
        file_t *fpdown;

        ASSERT(MUTEX_HELD(&muxifier));

        stpdown = linkp->li_fpdown->f_vnode->v_stream;

        /*
         * See the comment in mlink() concerning STRPLUMB/STPLEX flags.
         */
        mutex_enter(&stpdown->sd_lock);
        stpdown->sd_flag |= STRPLUMB;
        mutex_exit(&stpdown->sd_lock);

        /*
         * Add passthru queue below lower mux. This will block
         * syncqs of lower muxs read queue during I_LINK/I_UNLINK.
         */
        passq = link_addpassthru(stpdown);

        if ((flag & LINKTYPEMASK) == LINKNORMAL)
                strioc.ic_cmd = I_UNLINK;
        else
                strioc.ic_cmd = I_PUNLINK;
        strioc.ic_timout = INFTIM;
        strioc.ic_len = sizeof (struct linkblk);
        strioc.ic_dp = (char *)&linkp->li_lblk;

        error = strdoioctl(stp, &strioc, FNATIVE,
            K_TO_K | STR_NOERROR | STR_NOSIG, crp, rvalp);

        /*
         * If there was an error and this is not called via strclose,
         * return to the user. Otherwise, pretend there was no error
         * and close the link.
         */
        if (error) {
                if (flag & LINKCLOSE) {
                        cmn_err(CE_WARN, "KERNEL: munlink: could not perform "
                            "unlink ioctl, closing anyway (%d)\n", error);
                } else {
                        link_rempassthru(passq);
                        mutex_enter(&stpdown->sd_lock);
                        stpdown->sd_flag &= ~STRPLUMB;
                        cv_broadcast(&stpdown->sd_monitor);
                        mutex_exit(&stpdown->sd_lock);
                        mutex_exit(&muxifier);
                        return (error);
                }
        }

        mux_rmvedge(stp, linkp->li_lblk.l_index, ss);
        fpdown = linkp->li_fpdown;
        lbfree(linkp);

        /*
         * We go ahead and drop muxifier here--it's a nasty global lock that
         * can slow others down. It's okay to since attempts to mlink() this
         * stream will be stopped because STPLEX is still set in the stdata
         * structure, and munlink() is stopped because mux_rmvedge() and
         * lbfree() have removed it from mux_nodes[] and linkinfo_list,
         * respectively.  Note that we defer the closef() of fpdown until
         * after we drop muxifier since strclose() can call munlinkall().
         */
        mutex_exit(&muxifier);

        wrq = stpdown->sd_wrq;
        rq = _RD(wrq);

        /*
         * Get rid of outstanding service procedure runs, before we make
         * it a stream head, since a stream head doesn't have any service
         * procedure.
         */
        disable_svc(rq);
        wait_svc(rq);

        /*
         * Since we don't disable the syncq for QPERMOD, we wait for whatever
         * is queued up to be finished. mux should take care that nothing is
         * send down to this queue. We should do it now as we're going to block
         * passyncq if it was unblocked.
         */
        if (wrq->q_flag & QPERMOD) {
                syncq_t *sq = wrq->q_syncq;

                mutex_enter(SQLOCK(sq));
                while (wrq->q_sqflags & Q_SQQUEUED) {
                        sq->sq_flags |= SQ_WANTWAKEUP;
                        cv_wait(&sq->sq_wait, SQLOCK(sq));
                }
                mutex_exit(SQLOCK(sq));
        }
        passyncq = passq->q_syncq;
        if (!(passyncq->sq_flags & SQ_BLOCKED)) {

                syncq_t *sq, *outer;

                /*
                 * Messages could be flowing from underneath. We will
                 * block the read side of the passq. This would be
                 * sufficient for QPAIR and QPERQ muxes to ensure
                 * that no data is flowing up into this queue
                 * and hence no thread active in this instance of
                 * lower mux. But for QPERMOD and QMTOUTPERIM there
                 * could be messages on the inner and outer/inner
                 * syncqs respectively. We will wait for them to drain.
                 * Because passq is blocked messages end up in the syncq
                 * And qfill_syncq could possibly end up setting QFULL
                 * which will access the rq->q_flag. Hence, we have to
                 * acquire the QLOCK in setq.
                 *
                 * XXX Messages can also flow from top into this
                 * queue though the unlink is over (Ex. some instance
                 * in putnext() called from top that has still not
                 * accessed this queue. And also putq(lowerq) ?).
                 * Solution : How about blocking the l_qtop queue ?
                 * Do we really care about such pure D_MP muxes ?
                 */

                blocksq(passyncq, SQ_BLOCKED, 0);

                sq = rq->q_syncq;
                if ((outer = sq->sq_outer) != NULL) {

                        /*
                         * We have to just wait for the outer sq_count
                         * drop to zero. As this does not prevent new
                         * messages to enter the outer perimeter, this
                         * is subject to starvation.
                         *
                         * NOTE :Because of blocksq above, messages could
                         * be in the inner syncq only because of some
                         * thread holding the outer perimeter exclusively.
                         * Hence it would be sufficient to wait for the
                         * exclusive holder of the outer perimeter to drain
                         * the inner and outer syncqs. But we will not depend
                         * on this feature and hence check the inner syncqs
                         * separately.
                         */
                        wait_syncq(outer);
                }


                /*
                 * There could be messages destined for
                 * this queue. Let the exclusive holder
                 * drain it.
                 */

                wait_syncq(sq);
                ASSERT((rq->q_flag & QPERMOD) ||
                    ((rq->q_syncq->sq_head == NULL) &&
                    (_WR(rq)->q_syncq->sq_head == NULL)));
        }

        /*
         * We haven't taken care of QPERMOD case yet. QPERMOD is a special
         * case as we don't disable its syncq or remove it off the syncq
         * service list.
         */
        if (rq->q_flag & QPERMOD) {
                syncq_t *sq = rq->q_syncq;

                mutex_enter(SQLOCK(sq));
                while (rq->q_sqflags & Q_SQQUEUED) {
                        sq->sq_flags |= SQ_WANTWAKEUP;
                        cv_wait(&sq->sq_wait, SQLOCK(sq));
                }
                mutex_exit(SQLOCK(sq));
        }

        /*
         * flush_syncq changes states only when there are some messages to
         * free, i.e. when it returns non-zero value to return.
         */
        ASSERT(flush_syncq(rq->q_syncq, rq) == 0);
        ASSERT(flush_syncq(wrq->q_syncq, wrq) == 0);

        /*
         * Nobody else should know about this queue now.
         * If the mux did not process the messages before
         * acking the I_UNLINK, free them now.
         */

        flushq(rq, FLUSHALL);
        flushq(_WR(rq), FLUSHALL);

        /*
         * Convert the mux lower queue into a stream head queue.
         * Turn off STPLEX before we turn on the stream by removing the passq.
         */
        rq->q_ptr = wrq->q_ptr = stpdown;
        setq(rq, &strdata, &stwdata, NULL, QMTSAFE, SQ_CI|SQ_CO, B_TRUE);

        ASSERT((rq->q_flag & QMT_TYPEMASK) == QMTSAFE);
        ASSERT(rq->q_syncq == SQ(rq) && _WR(rq)->q_syncq == SQ(rq));

        enable_svc(rq);

        /*
         * Now it is a proper stream, so STPLEX is cleared. But STRPLUMB still
         * needs to be set to prevent reopen() of the stream - such reopen may
         * try to call non-existent pass queue open routine and panic.
         */
        mutex_enter(&stpdown->sd_lock);
        stpdown->sd_flag &= ~STPLEX;
        mutex_exit(&stpdown->sd_lock);

        ASSERT(((flag & LINKTYPEMASK) == LINKNORMAL) ||
            ((flag & LINKTYPEMASK) == LINKPERSIST));

        /* clean up the layered driver linkages */
        if ((flag & LINKTYPEMASK) == LINKNORMAL) {
                ldi_munlink_fp(stp, fpdown, LINKNORMAL);
        } else {
                ldi_munlink_fp(stp, fpdown, LINKPERSIST);
        }

        link_rempassthru(passq);

        /*
         * Now all plumbing changes are finished and STRPLUMB is no
         * longer needed.
         */
        mutex_enter(&stpdown->sd_lock);
        stpdown->sd_flag &= ~STRPLUMB;
        cv_broadcast(&stpdown->sd_monitor);
        mutex_exit(&stpdown->sd_lock);

        (void) closef(fpdown);
        return (0);
}

/*
 * Unlink all multiplexor links for which stp is the controlling stream.
 * Return 0, or a non-zero errno on failure.
 */
int
munlinkall(stdata_t *stp, int flag, cred_t *crp, int *rvalp, str_stack_t *ss)
{
        linkinfo_t *linkp;
        int error = 0;

        mutex_enter(&muxifier);
        while (linkp = findlinks(stp, 0, flag, ss)) {
                /*
                 * munlink() releases the muxifier lock.
                 */
                if (error = munlink(stp, linkp, flag, crp, rvalp, ss))
                        return (error);
                mutex_enter(&muxifier);
        }
        mutex_exit(&muxifier);
        return (0);
}

/*
 * A multiplexor link has been made. Add an
 * edge to the directed graph.
 */
void
mux_addedge(stdata_t *upstp, stdata_t *lostp, int muxid, str_stack_t *ss)
{
        struct mux_node *np;
        struct mux_edge *ep;
        major_t upmaj;
        major_t lomaj;

        upmaj = getmajor(upstp->sd_vnode->v_rdev);
        lomaj = getmajor(lostp->sd_vnode->v_rdev);
        np = &ss->ss_mux_nodes[upmaj];
        if (np->mn_outp) {
                ep = np->mn_outp;
                while (ep->me_nextp)
                        ep = ep->me_nextp;
                ep->me_nextp = kmem_alloc(sizeof (struct mux_edge), KM_SLEEP);
                ep = ep->me_nextp;
        } else {
                np->mn_outp = kmem_alloc(sizeof (struct mux_edge), KM_SLEEP);
                ep = np->mn_outp;
        }
        ep->me_nextp = NULL;
        ep->me_muxid = muxid;
        /*
         * Save the dev_t for the purposes of str_stack_shutdown.
         * str_stack_shutdown assumes that the device allows reopen, since
         * this dev_t is the one after any cloning by xx_open().
         * Would prefer finding the dev_t from before any cloning,
         * but specfs doesn't retain that.
         */
        ep->me_dev = upstp->sd_vnode->v_rdev;
        if (lostp->sd_vnode->v_type == VFIFO)
                ep->me_nodep = NULL;
        else
                ep->me_nodep = &ss->ss_mux_nodes[lomaj];
}

/*
 * A multiplexor link has been removed. Remove the
 * edge in the directed graph.
 */
void
mux_rmvedge(stdata_t *upstp, int muxid, str_stack_t *ss)
{
        struct mux_node *np;
        struct mux_edge *ep;
        struct mux_edge *pep = NULL;
        major_t upmaj;

        upmaj = getmajor(upstp->sd_vnode->v_rdev);
        np = &ss->ss_mux_nodes[upmaj];
        ASSERT(np->mn_outp != NULL);
        ep = np->mn_outp;
        while (ep) {
                if (ep->me_muxid == muxid) {
                        if (pep)
                                pep->me_nextp = ep->me_nextp;
                        else
                                np->mn_outp = ep->me_nextp;
                        kmem_free(ep, sizeof (struct mux_edge));
                        return;
                }
                pep = ep;
                ep = ep->me_nextp;
        }
        ASSERT(0);      /* should not reach here */
}

/*
 * Translate the device flags (from conf.h) to the corresponding
 * qflag and sq_flag (type) values.
 */
int
devflg_to_qflag(struct streamtab *stp, uint32_t devflag, uint32_t *qflagp,
    uint32_t *sqtypep)
{
        uint32_t qflag = 0;
        uint32_t sqtype = 0;

        if (devflag & _D_OLD)
                goto bad;

        /* Inner perimeter presence and scope */
        switch (devflag & D_MTINNER_MASK) {
        case D_MP:
                qflag |= QMTSAFE;
                sqtype |= SQ_CI;
                break;
        case D_MTPERQ|D_MP:
                qflag |= QPERQ;
                break;
        case D_MTQPAIR|D_MP:
                qflag |= QPAIR;
                break;
        case D_MTPERMOD|D_MP:
                qflag |= QPERMOD;
                break;
        default:
                goto bad;
        }

        /* Outer perimeter */
        if (devflag & D_MTOUTPERIM) {
                switch (devflag & D_MTINNER_MASK) {
                case D_MP:
                case D_MTPERQ|D_MP:
                case D_MTQPAIR|D_MP:
                        break;
                default:
                        goto bad;
                }
                qflag |= QMTOUTPERIM;
        }

        /* Inner perimeter modifiers */
        if (devflag & D_MTINNER_MOD) {
                switch (devflag & D_MTINNER_MASK) {
                case D_MP:
                        goto bad;
                default:
                        break;
                }
                if (devflag & D_MTPUTSHARED)
                        sqtype |= SQ_CIPUT;
                if (devflag & _D_MTOCSHARED) {
                        /*
                         * The code in putnext assumes that it has the
                         * highest concurrency by not checking sq_count.
                         * Thus _D_MTOCSHARED can only be supported when
                         * D_MTPUTSHARED is set.
                         */
                        if (!(devflag & D_MTPUTSHARED))
                                goto bad;
                        sqtype |= SQ_CIOC;
                }
                if (devflag & _D_MTCBSHARED) {
                        /*
                         * The code in putnext assumes that it has the
                         * highest concurrency by not checking sq_count.
                         * Thus _D_MTCBSHARED can only be supported when
                         * D_MTPUTSHARED is set.
                         */
                        if (!(devflag & D_MTPUTSHARED))
                                goto bad;
                        sqtype |= SQ_CICB;
                }
                if (devflag & _D_MTSVCSHARED) {
                        /*
                         * The code in putnext assumes that it has the
                         * highest concurrency by not checking sq_count.
                         * Thus _D_MTSVCSHARED can only be supported when
                         * D_MTPUTSHARED is set. Also _D_MTSVCSHARED is
                         * supported only for QPERMOD.
                         */
                        if (!(devflag & D_MTPUTSHARED) || !(qflag & QPERMOD))
                                goto bad;
                        sqtype |= SQ_CISVC;
                }
        }

        /* Default outer perimeter concurrency */
        sqtype |= SQ_CO;

        /* Outer perimeter modifiers */
        if (devflag & D_MTOCEXCL) {
                if (!(devflag & D_MTOUTPERIM)) {
                        /* No outer perimeter */
                        goto bad;
                }
                sqtype &= ~SQ_COOC;
        }

        /* Synchronous Streams extended qinit structure */
        if (devflag & D_SYNCSTR)
                qflag |= QSYNCSTR;

        /*
         * Private flag used by a transport module to indicate
         * to sockfs that it supports direct-access mode without
         * having to go through STREAMS.
         */
        if (devflag & _D_DIRECT) {
                /* Reject unless the module is fully-MT (no perimeter) */
                if ((qflag & QMT_TYPEMASK) != QMTSAFE)
                        goto bad;
                qflag |= _QDIRECT;
        }

        *qflagp = qflag;
        *sqtypep = sqtype;
        return (0);

bad:
        cmn_err(CE_WARN,
            "stropen: bad MT flags (0x%x) in driver '%s'",
            (int)(qflag & D_MTSAFETY_MASK),
            stp->st_rdinit->qi_minfo->mi_idname);

        return (EINVAL);
}

/*
 * Set the interface values for a pair of queues (qinit structure,
 * packet sizes, water marks).
 * setq assumes that the caller does not have a claim (entersq or claimq)
 * on the queue.
 */
void
setq(queue_t *rq, struct qinit *rinit, struct qinit *winit,
    perdm_t *dmp, uint32_t qflag, uint32_t sqtype, boolean_t lock_needed)
{
        queue_t *wq;
        syncq_t *sq, *outer;

        ASSERT(rq->q_flag & QREADR);
        ASSERT((qflag & QMT_TYPEMASK) != 0);
        IMPLY((qflag & (QPERMOD | QMTOUTPERIM)), dmp != NULL);

        wq = _WR(rq);
        rq->q_qinfo = rinit;
        rq->q_hiwat = rinit->qi_minfo->mi_hiwat;
        rq->q_lowat = rinit->qi_minfo->mi_lowat;
        rq->q_minpsz = rinit->qi_minfo->mi_minpsz;
        rq->q_maxpsz = rinit->qi_minfo->mi_maxpsz;
        wq->q_qinfo = winit;
        wq->q_hiwat = winit->qi_minfo->mi_hiwat;
        wq->q_lowat = winit->qi_minfo->mi_lowat;
        wq->q_minpsz = winit->qi_minfo->mi_minpsz;
        wq->q_maxpsz = winit->qi_minfo->mi_maxpsz;

        /* Remove old syncqs */
        sq = rq->q_syncq;
        outer = sq->sq_outer;
        if (outer != NULL) {
                ASSERT(wq->q_syncq->sq_outer == outer);
                outer_remove(outer, rq->q_syncq);
                if (wq->q_syncq != rq->q_syncq)
                        outer_remove(outer, wq->q_syncq);
        }
        ASSERT(sq->sq_outer == NULL);
        ASSERT(sq->sq_onext == NULL && sq->sq_oprev == NULL);

        if (sq != SQ(rq)) {
                if (!(rq->q_flag & QPERMOD))
                        free_syncq(sq);
                if (wq->q_syncq == rq->q_syncq)
                        wq->q_syncq = NULL;
                rq->q_syncq = NULL;
        }
        if (wq->q_syncq != NULL && wq->q_syncq != sq &&
            wq->q_syncq != SQ(rq)) {
                free_syncq(wq->q_syncq);
                wq->q_syncq = NULL;
        }
        ASSERT(rq->q_syncq == NULL || (rq->q_syncq->sq_head == NULL &&
            rq->q_syncq->sq_tail == NULL));
        ASSERT(wq->q_syncq == NULL || (wq->q_syncq->sq_head == NULL &&
            wq->q_syncq->sq_tail == NULL));

        if (!(rq->q_flag & QPERMOD) &&
            rq->q_syncq != NULL && rq->q_syncq->sq_ciputctrl != NULL) {
                ASSERT(rq->q_syncq->sq_nciputctrl == n_ciputctrl - 1);
                SUMCHECK_CIPUTCTRL_COUNTS(rq->q_syncq->sq_ciputctrl,
                    rq->q_syncq->sq_nciputctrl, 0);
                ASSERT(ciputctrl_cache != NULL);
                kmem_cache_free(ciputctrl_cache, rq->q_syncq->sq_ciputctrl);
                rq->q_syncq->sq_ciputctrl = NULL;
                rq->q_syncq->sq_nciputctrl = 0;
        }

        if (!(wq->q_flag & QPERMOD) &&
            wq->q_syncq != NULL && wq->q_syncq->sq_ciputctrl != NULL) {
                ASSERT(wq->q_syncq->sq_nciputctrl == n_ciputctrl - 1);
                SUMCHECK_CIPUTCTRL_COUNTS(wq->q_syncq->sq_ciputctrl,
                    wq->q_syncq->sq_nciputctrl, 0);
                ASSERT(ciputctrl_cache != NULL);
                kmem_cache_free(ciputctrl_cache, wq->q_syncq->sq_ciputctrl);
                wq->q_syncq->sq_ciputctrl = NULL;
                wq->q_syncq->sq_nciputctrl = 0;
        }

        sq = SQ(rq);
        ASSERT(sq->sq_head == NULL && sq->sq_tail == NULL);
        ASSERT(sq->sq_outer == NULL);
        ASSERT(sq->sq_onext == NULL && sq->sq_oprev == NULL);

        /*
         * Create syncqs based on qflag and sqtype. Set the SQ_TYPES_IN_FLAGS
         * bits in sq_flag based on the sqtype.
         */
        ASSERT((sq->sq_flags & ~SQ_TYPES_IN_FLAGS) == 0);

        rq->q_syncq = wq->q_syncq = sq;
        sq->sq_type = sqtype;
        sq->sq_flags = (sqtype & SQ_TYPES_IN_FLAGS);

        /*
         *  We are making sq_svcflags zero,
         *  resetting SQ_DISABLED in case it was set by
         *  wait_svc() in the munlink path.
         *
         */
        ASSERT((sq->sq_svcflags & SQ_SERVICE) == 0);
        sq->sq_svcflags = 0;

        /*
         * We need to acquire the lock here for the mlink and munlink case,
         * where canputnext, backenable, etc can access the q_flag.
         */
        if (lock_needed) {
                mutex_enter(QLOCK(rq));
                rq->q_flag = (rq->q_flag & ~QMT_TYPEMASK) | QWANTR | qflag;
                mutex_exit(QLOCK(rq));
                mutex_enter(QLOCK(wq));
                wq->q_flag = (wq->q_flag & ~QMT_TYPEMASK) | QWANTR | qflag;
                mutex_exit(QLOCK(wq));
        } else {
                rq->q_flag = (rq->q_flag & ~QMT_TYPEMASK) | QWANTR | qflag;
                wq->q_flag = (wq->q_flag & ~QMT_TYPEMASK) | QWANTR | qflag;
        }

        if (qflag & QPERQ) {
                /* Allocate a separate syncq for the write side */
                sq = new_syncq();
                sq->sq_type = rq->q_syncq->sq_type;
                sq->sq_flags = rq->q_syncq->sq_flags;
                ASSERT(sq->sq_outer == NULL && sq->sq_onext == NULL &&
                    sq->sq_oprev == NULL);
                wq->q_syncq = sq;
        }
        if (qflag & QPERMOD) {
                sq = dmp->dm_sq;

                /*
                 * Assert that we do have an inner perimeter syncq and that it
                 * does not have an outer perimeter associated with it.
                 */
                ASSERT(sq->sq_outer == NULL && sq->sq_onext == NULL &&
                    sq->sq_oprev == NULL);
                rq->q_syncq = wq->q_syncq = sq;
        }
        if (qflag & QMTOUTPERIM) {
                outer = dmp->dm_sq;

                ASSERT(outer->sq_outer == NULL);
                outer_insert(outer, rq->q_syncq);
                if (wq->q_syncq != rq->q_syncq)
                        outer_insert(outer, wq->q_syncq);
        }
        ASSERT((rq->q_syncq->sq_flags & SQ_TYPES_IN_FLAGS) ==
            (rq->q_syncq->sq_type & SQ_TYPES_IN_FLAGS));
        ASSERT((wq->q_syncq->sq_flags & SQ_TYPES_IN_FLAGS) ==
            (wq->q_syncq->sq_type & SQ_TYPES_IN_FLAGS));
        ASSERT((rq->q_flag & QMT_TYPEMASK) == (qflag & QMT_TYPEMASK));

        /*
         * Initialize struio() types.
         */
        rq->q_struiot =
            (rq->q_flag & QSYNCSTR) ? rinit->qi_struiot : STRUIOT_NONE;
        wq->q_struiot =
            (wq->q_flag & QSYNCSTR) ? winit->qi_struiot : STRUIOT_NONE;
}

perdm_t *
hold_dm(struct streamtab *str, uint32_t qflag, uint32_t sqtype)
{
        syncq_t *sq;
        perdm_t **pp;
        perdm_t *p;
        perdm_t *dmp;

        ASSERT(str != NULL);
        ASSERT(qflag & (QPERMOD | QMTOUTPERIM));

        rw_enter(&perdm_rwlock, RW_READER);
        for (p = perdm_list; p != NULL; p = p->dm_next) {
                if (p->dm_str == str) { /* found one */
                        atomic_inc_32(&(p->dm_ref));
                        rw_exit(&perdm_rwlock);
                        return (p);
                }
        }
        rw_exit(&perdm_rwlock);

        sq = new_syncq();
        if (qflag & QPERMOD) {
                sq->sq_type = sqtype | SQ_PERMOD;
                sq->sq_flags = sqtype & SQ_TYPES_IN_FLAGS;
        } else {
                ASSERT(qflag & QMTOUTPERIM);
                sq->sq_onext = sq->sq_oprev = sq;
        }

        dmp = kmem_alloc(sizeof (perdm_t), KM_SLEEP);
        dmp->dm_sq = sq;
        dmp->dm_str = str;
        dmp->dm_ref = 1;
        dmp->dm_next = NULL;

        rw_enter(&perdm_rwlock, RW_WRITER);
        for (pp = &perdm_list; (p = *pp) != NULL; pp = &(p->dm_next)) {
                if (p->dm_str == str) { /* already present */
                        p->dm_ref++;
                        rw_exit(&perdm_rwlock);
                        free_syncq(sq);
                        kmem_free(dmp, sizeof (perdm_t));
                        return (p);
                }
        }

        *pp = dmp;
        rw_exit(&perdm_rwlock);
        return (dmp);
}

void
rele_dm(perdm_t *dmp)
{
        perdm_t **pp;
        perdm_t *p;

        rw_enter(&perdm_rwlock, RW_WRITER);
        ASSERT(dmp->dm_ref > 0);

        if (--dmp->dm_ref > 0) {
                rw_exit(&perdm_rwlock);
                return;
        }

        for (pp = &perdm_list; (p = *pp) != NULL; pp = &(p->dm_next))
                if (p == dmp)
                        break;
        ASSERT(p == dmp);
        *pp = p->dm_next;
        rw_exit(&perdm_rwlock);

        /*
         * Wait for any background processing that relies on the
         * syncq to complete before it is freed.
         */
        wait_sq_svc(p->dm_sq);
        free_syncq(p->dm_sq);
        kmem_free(p, sizeof (perdm_t));
}

/*
 * Make a protocol message given control and data buffers.
 * n.b., this can block; be careful of what locks you hold when calling it.
 *
 * If sd_maxblk is less than *iosize this routine can fail part way through
 * (due to an allocation failure). In this case on return *iosize will contain
 * the amount that was consumed. Otherwise *iosize will not be modified
 * i.e. it will contain the amount that was consumed.
 */
int
strmakemsg(
        struct strbuf *mctl,
        ssize_t *iosize,
        struct uio *uiop,
        stdata_t *stp,
        int32_t flag,
        mblk_t **mpp)
{
        mblk_t *mpctl = NULL;
        mblk_t *mpdata = NULL;
        int error;

        ASSERT(uiop != NULL);

        *mpp = NULL;
        /* Create control part, if any */
        if ((mctl != NULL) && (mctl->len >= 0)) {
                error = strmakectl(mctl, flag, uiop->uio_fmode, &mpctl);
                if (error)
                        return (error);
        }
        /* Create data part, if any */
        if (*iosize >= 0) {
                error = strmakedata(iosize, uiop, stp, flag, &mpdata);
                if (error) {
                        freemsg(mpctl);
                        return (error);
                }
        }
        if (mpctl != NULL) {
                if (mpdata != NULL)
                        linkb(mpctl, mpdata);
                *mpp = mpctl;
        } else {
                *mpp = mpdata;
        }
        return (0);
}

/*
 * Make the control part of a protocol message given a control buffer.
 * n.b., this can block; be careful of what locks you hold when calling it.
 */
int
strmakectl(
        struct strbuf *mctl,
        int32_t flag,
        int32_t fflag,
        mblk_t **mpp)
{
        mblk_t *bp = NULL;
        unsigned char msgtype;
        int error = 0;
        cred_t *cr = CRED();

        /* We do not support interrupt threads using the stream head to send */
        ASSERT(cr != NULL);

        *mpp = NULL;
        /*
         * Create control part of message, if any.
         */
        if ((mctl != NULL) && (mctl->len >= 0)) {
                caddr_t base;
                int ctlcount;
                int allocsz;

                if (flag & RS_HIPRI)
                        msgtype = M_PCPROTO;
                else
                        msgtype = M_PROTO;

                ctlcount = mctl->len;
                base = mctl->buf;

                /*
                 * Give modules a better chance to reuse M_PROTO/M_PCPROTO
                 * blocks by increasing the size to something more usable.
                 */
                allocsz = MAX(ctlcount, 64);

                /*
                 * Range checking has already been done; simply try
                 * to allocate a message block for the ctl part.
                 */
                while ((bp = allocb_cred(allocsz, cr,
                    curproc->p_pid)) == NULL) {
                        if (fflag & (FNDELAY|FNONBLOCK))
                                return (EAGAIN);
                        if (error = strwaitbuf(allocsz, BPRI_MED))
                                return (error);
                }

                bp->b_datap->db_type = msgtype;
                if (copyin(base, bp->b_wptr, ctlcount)) {
                        freeb(bp);
                        return (EFAULT);
                }
                bp->b_wptr += ctlcount;
        }
        *mpp = bp;
        return (0);
}

/*
 * Make a protocol message given data buffers.
 * n.b., this can block; be careful of what locks you hold when calling it.
 *
 * If sd_maxblk is less than *iosize this routine can fail part way through
 * (due to an allocation failure). In this case on return *iosize will contain
 * the amount that was consumed. Otherwise *iosize will not be modified
 * i.e. it will contain the amount that was consumed.
 */
int
strmakedata(
        ssize_t   *iosize,
        struct uio *uiop,
        stdata_t *stp,
        int32_t flag,
        mblk_t **mpp)
{
        mblk_t *mp = NULL;
        mblk_t *bp;
        int wroff = (int)stp->sd_wroff;
        int tail_len = (int)stp->sd_tail;
        int extra = wroff + tail_len;
        int error = 0;
        ssize_t maxblk;
        ssize_t count = *iosize;
        cred_t *cr;

        *mpp = NULL;
        if (count < 0)
                return (0);

        /* We do not support interrupt threads using the stream head to send */
        cr = CRED();
        ASSERT(cr != NULL);

        maxblk = stp->sd_maxblk;
        if (maxblk == INFPSZ)
                maxblk = count;

        /*
         * Create data part of message, if any.
         */
        do {
                ssize_t size;
                dblk_t  *dp;

                ASSERT(uiop);

                size = MIN(count, maxblk);

                while ((bp = allocb_cred(size + extra, cr,
                    curproc->p_pid)) == NULL) {
                        error = EAGAIN;
                        if ((uiop->uio_fmode & (FNDELAY|FNONBLOCK)) ||
                            (error = strwaitbuf(size + extra, BPRI_MED)) != 0) {
                                if (count == *iosize) {
                                        freemsg(mp);
                                        return (error);
                                } else {
                                        *iosize -= count;
                                        *mpp = mp;
                                        return (0);
                                }
                        }
                }
                dp = bp->b_datap;
                dp->db_cpid = curproc->p_pid;
                ASSERT(wroff <= dp->db_lim - bp->b_wptr);
                bp->b_wptr = bp->b_rptr = bp->b_rptr + wroff;

                if (flag & STRUIO_POSTPONE) {
                        /*
                         * Setup the stream uio portion of the
                         * dblk for subsequent use by struioget().
                         */
                        dp->db_struioflag = STRUIO_SPEC;
                        dp->db_cksumstart = 0;
                        dp->db_cksumstuff = 0;
                        dp->db_cksumend = size;
                        *(long long *)dp->db_struioun.data = 0ll;
                        bp->b_wptr += size;
                } else {
                        if (stp->sd_copyflag & STRCOPYCACHED)
                                uiop->uio_extflg |= UIO_COPY_CACHED;

                        if (size != 0) {
                                error = uiomove(bp->b_wptr, size, UIO_WRITE,
                                    uiop);
                                if (error != 0) {
                                        freeb(bp);
                                        freemsg(mp);
                                        return (error);
                                }
                        }
                        bp->b_wptr += size;

                        if (stp->sd_wputdatafunc != NULL) {
                                mblk_t *newbp;

                                newbp = (stp->sd_wputdatafunc)(stp->sd_vnode,
                                    bp, NULL, NULL, NULL, NULL);
                                if (newbp == NULL) {
                                        freeb(bp);
                                        freemsg(mp);
                                        return (ECOMM);
                                }
                                bp = newbp;
                        }
                }

                count -= size;

                if (mp == NULL)
                        mp = bp;
                else
                        linkb(mp, bp);
        } while (count > 0);

        *mpp = mp;
        return (0);
}

/*
 * Wait for a buffer to become available. Return non-zero errno
 * if not able to wait, 0 if buffer is probably there.
 */
int
strwaitbuf(size_t size, int pri)
{
        bufcall_id_t id;

        mutex_enter(&bcall_monitor);
        if ((id = bufcall(size, pri, (void (*)(void *))cv_broadcast,
            &ttoproc(curthread)->p_flag_cv)) == 0) {
                mutex_exit(&bcall_monitor);
                return (ENOSR);
        }
        if (!cv_wait_sig(&(ttoproc(curthread)->p_flag_cv), &bcall_monitor)) {
                unbufcall(id);
                mutex_exit(&bcall_monitor);
                return (EINTR);
        }
        unbufcall(id);
        mutex_exit(&bcall_monitor);
        return (0);
}

/*
 * This function waits for a read or write event to happen on a stream.
 * fmode can specify FNDELAY and/or FNONBLOCK.
 * The timeout is in ms with -1 meaning infinite.
 * The flag values work as follows:
 *      READWAIT        Check for read side errors, send M_READ
 *      GETWAIT         Check for read side errors, no M_READ
 *      WRITEWAIT       Check for write side errors.
 *      NOINTR          Do not return error if nonblocking or timeout.
 *      STR_NOERROR     Ignore all errors except STPLEX.
 *      STR_NOSIG       Ignore/hold signals during the duration of the call.
 *      STR_PEEK        Pass through the strgeterr().
 */
int
strwaitq(stdata_t *stp, int flag, ssize_t count, int fmode, clock_t timout,
    int *done)
{
        int slpflg, errs;
        int error;
        kcondvar_t *sleepon;
        mblk_t *mp;
        ssize_t *rd_count;
        clock_t rval;

        ASSERT(MUTEX_HELD(&stp->sd_lock));
        if ((flag & READWAIT) || (flag & GETWAIT)) {
                slpflg = RSLEEP;
                sleepon = &_RD(stp->sd_wrq)->q_wait;
                errs = STRDERR|STPLEX;
        } else {
                slpflg = WSLEEP;
                sleepon = &stp->sd_wrq->q_wait;
                errs = STWRERR|STRHUP|STPLEX;
        }
        if (flag & STR_NOERROR)
                errs = STPLEX;

        if (stp->sd_wakeq & slpflg) {
                /*
                 * A strwakeq() is pending, no need to sleep.
                 */
                stp->sd_wakeq &= ~slpflg;
                *done = 0;
                return (0);
        }

        if (stp->sd_flag & errs) {
                /*
                 * Check for errors before going to sleep since the
                 * caller might not have checked this while holding
                 * sd_lock.
                 */
                error = strgeterr(stp, errs, (flag & STR_PEEK));
                if (error != 0) {
                        *done = 1;
                        return (error);
                }
        }

        /*
         * If any module downstream has requested read notification
         * by setting SNDMREAD flag using M_SETOPTS, send a message
         * down stream.
         */
        if ((flag & READWAIT) && (stp->sd_flag & SNDMREAD)) {
                mutex_exit(&stp->sd_lock);
                if (!(mp = allocb_wait(sizeof (ssize_t), BPRI_MED,
                    (flag & STR_NOSIG), &error))) {
                        mutex_enter(&stp->sd_lock);
                        *done = 1;
                        return (error);
                }
                mp->b_datap->db_type = M_READ;
                rd_count = (ssize_t *)mp->b_wptr;
                *rd_count = count;
                mp->b_wptr += sizeof (ssize_t);
                /*
                 * Send the number of bytes requested by the
                 * read as the argument to M_READ.
                 */
                stream_willservice(stp);
                putnext(stp->sd_wrq, mp);
                stream_runservice(stp);
                mutex_enter(&stp->sd_lock);

                /*
                 * If any data arrived due to inline processing
                 * of putnext(), don't sleep.
                 */
                if (_RD(stp->sd_wrq)->q_first != NULL) {
                        *done = 0;
                        return (0);
                }
        }

        if (fmode & (FNDELAY|FNONBLOCK)) {
                if (!(flag & NOINTR))
                        error = EAGAIN;
                else
                        error = 0;
                *done = 1;
                return (error);
        }

        stp->sd_flag |= slpflg;
        TRACE_5(TR_FAC_STREAMS_FR, TR_STRWAITQ_WAIT2,
            "strwaitq sleeps (2):%p, %X, %lX, %X, %p",
            stp, flag, count, fmode, done);

        rval = str_cv_wait(sleepon, &stp->sd_lock, timout, flag & STR_NOSIG);
        if (rval > 0) {
                /* EMPTY */
                TRACE_5(TR_FAC_STREAMS_FR, TR_STRWAITQ_WAKE2,
                    "strwaitq awakes(2):%X, %X, %X, %X, %X",
                    stp, flag, count, fmode, done);
        } else if (rval == 0) {
                TRACE_5(TR_FAC_STREAMS_FR, TR_STRWAITQ_INTR2,
                    "strwaitq interrupt #2:%p, %X, %lX, %X, %p",
                    stp, flag, count, fmode, done);
                stp->sd_flag &= ~slpflg;
                cv_broadcast(sleepon);
                if (!(flag & NOINTR))
                        error = EINTR;
                else
                        error = 0;
                *done = 1;
                return (error);
        } else {
                /* timeout */
                TRACE_5(TR_FAC_STREAMS_FR, TR_STRWAITQ_TIME,
                    "strwaitq timeout:%p, %X, %lX, %X, %p",
                    stp, flag, count, fmode, done);
                *done = 1;
                if (!(flag & NOINTR))
                        return (ETIME);
                else
                        return (0);
        }
        /*
         * If the caller implements delayed errors (i.e. queued after data)
         * we can not check for errors here since data as well as an
         * error might have arrived at the stream head. We return to
         * have the caller check the read queue before checking for errors.
         */
        if ((stp->sd_flag & errs) && !(flag & STR_DELAYERR)) {
                error = strgeterr(stp, errs, (flag & STR_PEEK));
                if (error != 0) {
                        *done = 1;
                        return (error);
                }
        }
        *done = 0;
        return (0);
}

/*
 * Perform job control discipline access checks.
 * Return 0 for success and the errno for failure.
 */

#define cantsend(p, t, sig) \
        (sigismember(&(p)->p_ignore, sig) || signal_is_blocked((t), sig))

int
straccess(struct stdata *stp, enum jcaccess mode)
{
        extern kcondvar_t lbolt_cv;     /* XXX: should be in a header file */
        kthread_t *t = curthread;
        proc_t *p = ttoproc(t);
        sess_t *sp;

        ASSERT(mutex_owned(&stp->sd_lock));

        if (stp->sd_sidp == NULL || stp->sd_vnode->v_type == VFIFO)
                return (0);

        mutex_enter(&p->p_lock);                /* protects p_pgidp */

        for (;;) {
                mutex_enter(&p->p_splock);      /* protects p->p_sessp */
                sp = p->p_sessp;
                mutex_enter(&sp->s_lock);       /* protects sp->* */

                /*
                 * If this is not the calling process's controlling terminal
                 * or if the calling process is already in the foreground
                 * then allow access.
                 */
                if (sp->s_dev != stp->sd_vnode->v_rdev ||
                    p->p_pgidp == stp->sd_pgidp) {
                        mutex_exit(&sp->s_lock);
                        mutex_exit(&p->p_splock);
                        mutex_exit(&p->p_lock);
                        return (0);
                }

                /*
                 * Check to see if controlling terminal has been deallocated.
                 */
                if (sp->s_vp == NULL) {
                        if (!cantsend(p, t, SIGHUP))
                                sigtoproc(p, t, SIGHUP);
                        mutex_exit(&sp->s_lock);
                        mutex_exit(&p->p_splock);
                        mutex_exit(&p->p_lock);
                        return (EIO);
                }

                mutex_exit(&sp->s_lock);
                mutex_exit(&p->p_splock);

                if (mode == JCGETP) {
                        mutex_exit(&p->p_lock);
                        return (0);
                }

                if (mode == JCREAD) {
                        if (p->p_detached || cantsend(p, t, SIGTTIN)) {
                                mutex_exit(&p->p_lock);
                                return (EIO);
                        }
                        mutex_exit(&p->p_lock);
                        mutex_exit(&stp->sd_lock);
                        pgsignal(p->p_pgidp, SIGTTIN);
                        mutex_enter(&stp->sd_lock);
                        mutex_enter(&p->p_lock);
                } else {  /* mode == JCWRITE or JCSETP */
                        if ((mode == JCWRITE && !(stp->sd_flag & STRTOSTOP)) ||
                            cantsend(p, t, SIGTTOU)) {
                                mutex_exit(&p->p_lock);
                                return (0);
                        }
                        if (p->p_detached) {
                                mutex_exit(&p->p_lock);
                                return (EIO);
                        }
                        mutex_exit(&p->p_lock);
                        mutex_exit(&stp->sd_lock);
                        pgsignal(p->p_pgidp, SIGTTOU);
                        mutex_enter(&stp->sd_lock);
                        mutex_enter(&p->p_lock);
                }

                /*
                 * We call cv_wait_sig_swap() to cause the appropriate
                 * action for the jobcontrol signal to take place.
                 * If the signal is being caught, we will take the
                 * EINTR error return.  Otherwise, the default action
                 * of causing the process to stop will take place.
                 * In this case, we rely on the periodic cv_broadcast() on
                 * &lbolt_cv to wake us up to loop around and test again.
                 * We can't get here if the signal is ignored or
                 * if the current thread is blocking the signal.
                 */
                mutex_exit(&stp->sd_lock);
                if (!cv_wait_sig_swap(&lbolt_cv, &p->p_lock)) {
                        mutex_exit(&p->p_lock);
                        mutex_enter(&stp->sd_lock);
                        return (EINTR);
                }
                mutex_exit(&p->p_lock);
                mutex_enter(&stp->sd_lock);
                mutex_enter(&p->p_lock);
        }
}

/*
 * Return size of message of block type (bp->b_datap->db_type)
 */
size_t
xmsgsize(mblk_t *bp)
{
        unsigned char type;
        size_t count = 0;

        type = bp->b_datap->db_type;

        for (; bp; bp = bp->b_cont) {
                if (type != bp->b_datap->db_type)
                        break;
                ASSERT(bp->b_wptr >= bp->b_rptr);
                count += bp->b_wptr - bp->b_rptr;
        }
        return (count);
}

/*
 * Allocate a stream head.
 */
struct stdata *
shalloc(queue_t *qp)
{
        stdata_t *stp;

        stp = kmem_cache_alloc(stream_head_cache, KM_SLEEP);

        stp->sd_wrq = _WR(qp);
        stp->sd_strtab = NULL;
        stp->sd_iocid = 0;
        stp->sd_mate = NULL;
        stp->sd_freezer = NULL;
        stp->sd_refcnt = 0;
        stp->sd_wakeq = 0;
        stp->sd_anchor = 0;
        stp->sd_struiowrq = NULL;
        stp->sd_struiordq = NULL;
        stp->sd_struiodnak = 0;
        stp->sd_struionak = NULL;
        stp->sd_t_audit_data = NULL;
        stp->sd_rput_opt = 0;
        stp->sd_wput_opt = 0;
        stp->sd_read_opt = 0;
        stp->sd_rprotofunc = strrput_proto;
        stp->sd_rmiscfunc = strrput_misc;
        stp->sd_rderrfunc = stp->sd_wrerrfunc = NULL;
        stp->sd_rputdatafunc = stp->sd_wputdatafunc = NULL;
        stp->sd_ciputctrl = NULL;
        stp->sd_nciputctrl = 0;
        stp->sd_qhead = NULL;
        stp->sd_qtail = NULL;
        stp->sd_servid = NULL;
        stp->sd_nqueues = 0;
        stp->sd_svcflags = 0;
        stp->sd_copyflag = 0;

        return (stp);
}

/*
 * Free a stream head.
 */
void
shfree(stdata_t *stp)
{
        ASSERT(MUTEX_NOT_HELD(&stp->sd_lock));

        stp->sd_wrq = NULL;

        mutex_enter(&stp->sd_qlock);
        while (stp->sd_svcflags & STRS_SCHEDULED) {
                STRSTAT(strwaits);
                cv_wait(&stp->sd_qcv, &stp->sd_qlock);
        }
        mutex_exit(&stp->sd_qlock);

        if (stp->sd_ciputctrl != NULL) {
                ASSERT(stp->sd_nciputctrl == n_ciputctrl - 1);
                SUMCHECK_CIPUTCTRL_COUNTS(stp->sd_ciputctrl,
                    stp->sd_nciputctrl, 0);
                ASSERT(ciputctrl_cache != NULL);
                kmem_cache_free(ciputctrl_cache, stp->sd_ciputctrl);
                stp->sd_ciputctrl = NULL;
                stp->sd_nciputctrl = 0;
        }
        ASSERT(stp->sd_qhead == NULL);
        ASSERT(stp->sd_qtail == NULL);
        ASSERT(stp->sd_nqueues == 0);
        kmem_cache_free(stream_head_cache, stp);
}

/*
 * Allocate a pair of queues and a syncq for the pair
 */
queue_t *
allocq(void)
{
        queinfo_t *qip;
        queue_t *qp, *wqp;
        syncq_t *sq;

        qip = kmem_cache_alloc(queue_cache, KM_SLEEP);

        qp = &qip->qu_rqueue;
        wqp = &qip->qu_wqueue;
        sq = &qip->qu_syncq;

        qp->q_last      = NULL;
        qp->q_next      = NULL;
        qp->q_ptr       = NULL;
        qp->q_flag      = QUSE | QREADR;
        qp->q_bandp     = NULL;
        qp->q_stream    = NULL;
        qp->q_syncq     = sq;
        qp->q_nband     = 0;
        qp->q_nfsrv     = NULL;
        qp->q_draining  = 0;
        qp->q_syncqmsgs = 0;
        qp->q_spri      = 0;
        qp->q_qtstamp   = 0;
        qp->q_sqtstamp  = 0;
        qp->q_fp        = NULL;

        wqp->q_last     = NULL;
        wqp->q_next     = NULL;
        wqp->q_ptr      = NULL;
        wqp->q_flag     = QUSE;
        wqp->q_bandp    = NULL;
        wqp->q_stream   = NULL;
        wqp->q_syncq    = sq;
        wqp->q_nband    = 0;
        wqp->q_nfsrv    = NULL;
        wqp->q_draining = 0;
        wqp->q_syncqmsgs = 0;
        wqp->q_qtstamp  = 0;
        wqp->q_sqtstamp = 0;
        wqp->q_spri     = 0;

        sq->sq_count    = 0;
        sq->sq_rmqcount = 0;
        sq->sq_flags    = 0;
        sq->sq_type     = 0;
        sq->sq_callbflags = 0;
        sq->sq_cancelid = 0;
        sq->sq_ciputctrl = NULL;
        sq->sq_nciputctrl = 0;
        sq->sq_needexcl = 0;
        sq->sq_svcflags = 0;

        return (qp);
}

/*
 * Free a pair of queues and the "attached" syncq.
 * Discard any messages left on the syncq(s), remove the syncq(s) from the
 * outer perimeter, and free the syncq(s) if they are not the "attached" syncq.
 */
void
freeq(queue_t *qp)
{
        qband_t *qbp, *nqbp;
        syncq_t *sq, *outer;
        queue_t *wqp = _WR(qp);

        ASSERT(qp->q_flag & QREADR);

        /*
         * If a previously dispatched taskq job is scheduled to run
         * sync_service() or a service routine is scheduled for the
         * queues about to be freed, wait here until all service is
         * done on the queue and all associated queues and syncqs.
         */
        wait_svc(qp);

        (void) flush_syncq(qp->q_syncq, qp);
        (void) flush_syncq(wqp->q_syncq, wqp);
        ASSERT(qp->q_syncqmsgs == 0 && wqp->q_syncqmsgs == 0);

        /*
         * Flush the queues before q_next is set to NULL This is needed
         * in order to backenable any downstream queue before we go away.
         * Note: we are already removed from the stream so that the
         * backenabling will not cause any messages to be delivered to our
         * put procedures.
         */
        flushq(qp, FLUSHALL);
        flushq(wqp, FLUSHALL);

        /* Tidy up - removeq only does a half-remove from stream */
        qp->q_next = wqp->q_next = NULL;
        ASSERT(!(qp->q_flag & QENAB));
        ASSERT(!(wqp->q_flag & QENAB));

        outer = qp->q_syncq->sq_outer;
        if (outer != NULL) {
                outer_remove(outer, qp->q_syncq);
                if (wqp->q_syncq != qp->q_syncq)
                        outer_remove(outer, wqp->q_syncq);
        }
        /*
         * Free any syncqs that are outside what allocq returned.
         */
        if (qp->q_syncq != SQ(qp) && !(qp->q_flag & QPERMOD))
                free_syncq(qp->q_syncq);
        if (qp->q_syncq != wqp->q_syncq && wqp->q_syncq != SQ(qp))
                free_syncq(wqp->q_syncq);

        ASSERT((qp->q_sqflags & (Q_SQQUEUED | Q_SQDRAINING)) == 0);
        ASSERT((wqp->q_sqflags & (Q_SQQUEUED | Q_SQDRAINING)) == 0);
        ASSERT(MUTEX_NOT_HELD(QLOCK(qp)));
        ASSERT(MUTEX_NOT_HELD(QLOCK(wqp)));
        sq = SQ(qp);
        ASSERT(MUTEX_NOT_HELD(SQLOCK(sq)));
        ASSERT(sq->sq_head == NULL && sq->sq_tail == NULL);
        ASSERT(sq->sq_outer == NULL);
        ASSERT(sq->sq_onext == NULL && sq->sq_oprev == NULL);
        ASSERT(sq->sq_callbpend == NULL);
        ASSERT(sq->sq_needexcl == 0);

        if (sq->sq_ciputctrl != NULL) {
                ASSERT(sq->sq_nciputctrl == n_ciputctrl - 1);
                SUMCHECK_CIPUTCTRL_COUNTS(sq->sq_ciputctrl,
                    sq->sq_nciputctrl, 0);
                ASSERT(ciputctrl_cache != NULL);
                kmem_cache_free(ciputctrl_cache, sq->sq_ciputctrl);
                sq->sq_ciputctrl = NULL;
                sq->sq_nciputctrl = 0;
        }

        ASSERT(qp->q_first == NULL && wqp->q_first == NULL);
        ASSERT(qp->q_count == 0 && wqp->q_count == 0);
        ASSERT(qp->q_mblkcnt == 0 && wqp->q_mblkcnt == 0);

        qp->q_flag &= ~QUSE;
        wqp->q_flag &= ~QUSE;

        /* NOTE: Uncomment the assert below once bugid 1159635 is fixed. */
        /* ASSERT((qp->q_flag & QWANTW) == 0 && (wqp->q_flag & QWANTW) == 0); */

        qbp = qp->q_bandp;
        while (qbp) {
                nqbp = qbp->qb_next;
                freeband(qbp);
                qbp = nqbp;
        }
        qbp = wqp->q_bandp;
        while (qbp) {
                nqbp = qbp->qb_next;
                freeband(qbp);
                qbp = nqbp;
        }
        kmem_cache_free(queue_cache, qp);
}

/*
 * Allocate a qband structure.
 */
qband_t *
allocband(void)
{
        qband_t *qbp;

        qbp = kmem_cache_alloc(qband_cache, KM_NOSLEEP);
        if (qbp == NULL)
                return (NULL);

        qbp->qb_next    = NULL;
        qbp->qb_count   = 0;
        qbp->qb_mblkcnt = 0;
        qbp->qb_first   = NULL;
        qbp->qb_last    = NULL;
        qbp->qb_flag    = 0;

        return (qbp);
}

/*
 * Free a qband structure.
 */
void
freeband(qband_t *qbp)
{
        kmem_cache_free(qband_cache, qbp);
}

/*
 * Just like putnextctl(9F), except that allocb_wait() is used.
 *
 * Consolidation Private, and of course only callable from the stream head or
 * routines that may block.
 */
int
putnextctl_wait(queue_t *q, int type)
{
        mblk_t *bp;
        int error;

        if ((datamsg(type) && (type != M_DELAY)) ||
            (bp = allocb_wait(0, BPRI_HI, 0, &error)) == NULL)
                return (0);

        bp->b_datap->db_type = (unsigned char)type;
        putnext(q, bp);
        return (1);
}

/*
 * Run any possible bufcalls.
 */
void
runbufcalls(void)
{
        strbufcall_t *bcp;

        mutex_enter(&bcall_monitor);
        mutex_enter(&strbcall_lock);

        if (strbcalls.bc_head) {
                size_t count;
                int nevent;

                /*
                 * count how many events are on the list
                 * now so we can check to avoid looping
                 * in low memory situations
                 */
                nevent = 0;
                for (bcp = strbcalls.bc_head; bcp; bcp = bcp->bc_next)
                        nevent++;

                /*
                 * get estimate of available memory from kmem_avail().
                 * awake all bufcall functions waiting for
                 * memory whose request could be satisfied
                 * by 'count' memory and let 'em fight for it.
                 */
                count = kmem_avail();
                while ((bcp = strbcalls.bc_head) != NULL && nevent) {
                        STRSTAT(bufcalls);
                        --nevent;
                        if (bcp->bc_size <= count) {
                                bcp->bc_executor = curthread;
                                mutex_exit(&strbcall_lock);
                                (*bcp->bc_func)(bcp->bc_arg);
                                mutex_enter(&strbcall_lock);
                                bcp->bc_executor = NULL;
                                cv_broadcast(&bcall_cv);
                                strbcalls.bc_head = bcp->bc_next;
                                kmem_free(bcp, sizeof (strbufcall_t));
                        } else {
                                /*
                                 * too big, try again later - note
                                 * that nevent was decremented above
                                 * so we won't retry this one on this
                                 * iteration of the loop
                                 */
                                if (bcp->bc_next != NULL) {
                                        strbcalls.bc_head = bcp->bc_next;
                                        bcp->bc_next = NULL;
                                        strbcalls.bc_tail->bc_next = bcp;
                                        strbcalls.bc_tail = bcp;
                                }
                        }
                }
                if (strbcalls.bc_head == NULL)
                        strbcalls.bc_tail = NULL;
        }

        mutex_exit(&strbcall_lock);
        mutex_exit(&bcall_monitor);
}


/*
 * Actually run queue's service routine.
 */
static void
runservice(queue_t *q)
{
        qband_t *qbp;

        ASSERT(q->q_qinfo->qi_srvp);
again:
        entersq(q->q_syncq, SQ_SVC);
        TRACE_1(TR_FAC_STREAMS_FR, TR_QRUNSERVICE_START,
            "runservice starts:%p", q);

        if (!(q->q_flag & QWCLOSE))
                (*q->q_qinfo->qi_srvp)(q);

        TRACE_1(TR_FAC_STREAMS_FR, TR_QRUNSERVICE_END,
            "runservice ends:(%p)", q);

        leavesq(q->q_syncq, SQ_SVC);

        mutex_enter(QLOCK(q));
        if (q->q_flag & QENAB) {
                q->q_flag &= ~QENAB;
                mutex_exit(QLOCK(q));
                goto again;
        }
        q->q_flag &= ~QINSERVICE;
        q->q_flag &= ~QBACK;
        for (qbp = q->q_bandp; qbp; qbp = qbp->qb_next)
                qbp->qb_flag &= ~QB_BACK;
        /*
         * Wakeup thread waiting for the service procedure
         * to be run (strclose and qdetach).
         */
        cv_broadcast(&q->q_wait);

        mutex_exit(QLOCK(q));
}

/*
 * Background processing of bufcalls.
 */
void
streams_bufcall_service(void)
{
        callb_cpr_t     cprinfo;

        CALLB_CPR_INIT(&cprinfo, &strbcall_lock, callb_generic_cpr,
            "streams_bufcall_service");

        mutex_enter(&strbcall_lock);

        for (;;) {
                if (strbcalls.bc_head != NULL && kmem_avail() > 0) {
                        mutex_exit(&strbcall_lock);
                        runbufcalls();
                        mutex_enter(&strbcall_lock);
                }
                if (strbcalls.bc_head != NULL) {
                        STRSTAT(bcwaits);
                        /* Wait for memory to become available */
                        CALLB_CPR_SAFE_BEGIN(&cprinfo);
                        (void) cv_reltimedwait(&memavail_cv, &strbcall_lock,
                            SEC_TO_TICK(60), TR_CLOCK_TICK);
                        CALLB_CPR_SAFE_END(&cprinfo, &strbcall_lock);
                }

                /* Wait for new work to arrive */
                if (strbcalls.bc_head == NULL) {
                        CALLB_CPR_SAFE_BEGIN(&cprinfo);
                        cv_wait(&strbcall_cv, &strbcall_lock);
                        CALLB_CPR_SAFE_END(&cprinfo, &strbcall_lock);
                }
        }
}

/*
 * Background processing of streams background tasks which failed
 * taskq_dispatch.
 */
static void
streams_qbkgrnd_service(void)
{
        callb_cpr_t cprinfo;
        queue_t *q;

        CALLB_CPR_INIT(&cprinfo, &service_queue, callb_generic_cpr,
            "streams_bkgrnd_service");

        mutex_enter(&service_queue);

        for (;;) {
                /*
                 * Wait for work to arrive.
                 */
                while ((freebs_list == NULL) && (qhead == NULL)) {
                        CALLB_CPR_SAFE_BEGIN(&cprinfo);
                        cv_wait(&services_to_run, &service_queue);
                        CALLB_CPR_SAFE_END(&cprinfo, &service_queue);
                }
                /*
                 * Handle all pending freebs requests to free memory.
                 */
                while (freebs_list != NULL) {
                        mblk_t *mp = freebs_list;
                        freebs_list = mp->b_next;
                        mutex_exit(&service_queue);
                        mblk_free(mp);
                        mutex_enter(&service_queue);
                }
                /*
                 * Run pending queues.
                 */
                while (qhead != NULL) {
                        DQ(q, qhead, qtail, q_link);
                        ASSERT(q != NULL);
                        mutex_exit(&service_queue);
                        queue_service(q);
                        mutex_enter(&service_queue);
                }
                ASSERT(qhead == NULL && qtail == NULL);
        }
}

/*
 * Background processing of streams background tasks which failed
 * taskq_dispatch.
 */
static void
streams_sqbkgrnd_service(void)
{
        callb_cpr_t cprinfo;
        syncq_t *sq;

        CALLB_CPR_INIT(&cprinfo, &service_queue, callb_generic_cpr,
            "streams_sqbkgrnd_service");

        mutex_enter(&service_queue);

        for (;;) {
                /*
                 * Wait for work to arrive.
                 */
                while (sqhead == NULL) {
                        CALLB_CPR_SAFE_BEGIN(&cprinfo);
                        cv_wait(&syncqs_to_run, &service_queue);
                        CALLB_CPR_SAFE_END(&cprinfo, &service_queue);
                }

                /*
                 * Run pending syncqs.
                 */
                while (sqhead != NULL) {
                        DQ(sq, sqhead, sqtail, sq_next);
                        ASSERT(sq != NULL);
                        ASSERT(sq->sq_svcflags & SQ_BGTHREAD);
                        mutex_exit(&service_queue);
                        syncq_service(sq);
                        mutex_enter(&service_queue);
                }
        }
}

/*
 * Disable the syncq and wait for background syncq processing to complete.
 * If the syncq is placed on the sqhead/sqtail queue, try to remove it from the
 * list.
 */
void
wait_sq_svc(syncq_t *sq)
{
        mutex_enter(SQLOCK(sq));
        sq->sq_svcflags |= SQ_DISABLED;
        if (sq->sq_svcflags & SQ_BGTHREAD) {
                syncq_t *sq_chase;
                syncq_t *sq_curr;
                int removed;

                ASSERT(sq->sq_servcount == 1);
                mutex_enter(&service_queue);
                RMQ(sq, sqhead, sqtail, sq_next, sq_chase, sq_curr, removed);
                mutex_exit(&service_queue);
                if (removed) {
                        sq->sq_svcflags &= ~SQ_BGTHREAD;
                        sq->sq_servcount = 0;
                        STRSTAT(sqremoved);
                        goto done;
                }
        }
        while (sq->sq_servcount != 0) {
                sq->sq_flags |= SQ_WANTWAKEUP;
                cv_wait(&sq->sq_wait, SQLOCK(sq));
        }
done:
        mutex_exit(SQLOCK(sq));
}

/*
 * Put a syncq on the list of syncq's to be serviced by the sqthread.
 * Add the argument to the end of the sqhead list and set the flag
 * indicating this syncq has been enabled.  If it has already been
 * enabled, don't do anything.
 * This routine assumes that SQLOCK is held.
 * NOTE that the lock order is to have the SQLOCK first,
 * so if the service_syncq lock is held, we need to release it
 * before acquiring the SQLOCK (mostly relevant for the background
 * thread, and this seems to be common among the STREAMS global locks).
 * Note that the sq_svcflags are protected by the SQLOCK.
 */
void
sqenable(syncq_t *sq)
{
        /*
         * This is probably not important except for where I believe it
         * is being called.  At that point, it should be held (and it
         * is a pain to release it just for this routine, so don't do
         * it).
         */
        ASSERT(MUTEX_HELD(SQLOCK(sq)));

        IMPLY(sq->sq_servcount == 0, sq->sq_next == NULL);
        IMPLY(sq->sq_next != NULL, sq->sq_svcflags & SQ_BGTHREAD);

        /*
         * Do not put on list if background thread is scheduled or
         * syncq is disabled.
         */
        if (sq->sq_svcflags & (SQ_DISABLED | SQ_BGTHREAD))
                return;

        /*
         * Check whether we should enable sq at all.
         * Non PERMOD syncqs may be drained by at most one thread.
         * PERMOD syncqs may be drained by several threads but we limit the
         * total amount to the lesser of
         *      Number of queues on the squeue and
         *      Number of CPUs.
         */
        if (sq->sq_servcount != 0) {
                if (((sq->sq_type & SQ_PERMOD) == 0) ||
                    (sq->sq_servcount >= MIN(sq->sq_nqueues, ncpus_online))) {
                        STRSTAT(sqtoomany);
                        return;
                }
        }

        sq->sq_tstamp = ddi_get_lbolt();
        STRSTAT(sqenables);

        /* Attempt a taskq dispatch */
        sq->sq_servid = (void *)taskq_dispatch(streams_taskq,
            (task_func_t *)syncq_service, sq, TQ_NOSLEEP | TQ_NOQUEUE);
        if (sq->sq_servid != NULL) {
                sq->sq_servcount++;
                return;
        }

        /*
         * This taskq dispatch failed, but a previous one may have succeeded.
         * Don't try to schedule on the background thread whilst there is
         * outstanding taskq processing.
         */
        if (sq->sq_servcount != 0)
                return;

        /*
         * System is low on resources and can't perform a non-sleeping
         * dispatch. Schedule the syncq for a background thread and mark the
         * syncq to avoid any further taskq dispatch attempts.
         */
        mutex_enter(&service_queue);
        STRSTAT(taskqfails);
        ENQUEUE(sq, sqhead, sqtail, sq_next);
        sq->sq_svcflags |= SQ_BGTHREAD;
        sq->sq_servcount = 1;
        cv_signal(&syncqs_to_run);
        mutex_exit(&service_queue);
}

/*
 * Note: fifo_close() depends on the mblk_t on the queue being freed
 * asynchronously. The asynchronous freeing of messages breaks the
 * recursive call chain of fifo_close() while there are I_SENDFD type of
 * messages referring to other file pointers on the queue. Then when
 * closing pipes it can avoid stack overflow in case of daisy-chained
 * pipes, and also avoid deadlock in case of fifonode_t pairs (which
 * share the same fifolock_t).
 *
 * No need to kpreempt_disable to access cpu_seqid.  If we migrate and
 * the esb queue does not match the new CPU, that is OK.
 */
void
freebs_enqueue(mblk_t *mp, dblk_t *dbp)
{
        int qindex = CPU->cpu_seqid >> esbq_log2_cpus_per_q;
        esb_queue_t *eqp;

        ASSERT(dbp->db_mblk == mp);
        ASSERT(qindex < esbq_nelem);

        eqp = system_esbq_array;
        if (eqp != NULL) {
                eqp += qindex;
        } else {
                mutex_enter(&esbq_lock);
                if (kmem_ready && system_esbq_array == NULL)
                        system_esbq_array = (esb_queue_t *)kmem_zalloc(
                            esbq_nelem * sizeof (esb_queue_t), KM_NOSLEEP);
                mutex_exit(&esbq_lock);
                eqp = system_esbq_array;
                if (eqp != NULL)
                        eqp += qindex;
                else
                        eqp = &system_esbq;
        }

        /*
         * Check data sanity. The dblock should have non-empty free function.
         * It is better to panic here then later when the dblock is freed
         * asynchronously when the context is lost.
         */
        if (dbp->db_frtnp->free_func == NULL) {
                panic("freebs_enqueue: dblock %p has a NULL free callback",
                    (void *)dbp);
        }

        mutex_enter(&eqp->eq_lock);
        /* queue the new mblk on the esballoc queue */
        if (eqp->eq_head == NULL) {
                eqp->eq_head = eqp->eq_tail = mp;
        } else {
                eqp->eq_tail->b_next = mp;
                eqp->eq_tail = mp;
        }
        eqp->eq_len++;

        /* If we're the first thread to reach the threshold, process */
        if (eqp->eq_len >= esbq_max_qlen &&
            !(eqp->eq_flags & ESBQ_PROCESSING))
                esballoc_process_queue(eqp);

        esballoc_set_timer(eqp, esbq_timeout);
        mutex_exit(&eqp->eq_lock);
}

static void
esballoc_process_queue(esb_queue_t *eqp)
{
        mblk_t  *mp;

        ASSERT(MUTEX_HELD(&eqp->eq_lock));

        eqp->eq_flags |= ESBQ_PROCESSING;

        do {
                /*
                 * Detach the message chain for processing.
                 */
                mp = eqp->eq_head;
                eqp->eq_tail->b_next = NULL;
                eqp->eq_head = eqp->eq_tail = NULL;
                eqp->eq_len = 0;
                mutex_exit(&eqp->eq_lock);

                /*
                 * Process the message chain.
                 */
                esballoc_enqueue_mblk(mp);
                mutex_enter(&eqp->eq_lock);
        } while ((eqp->eq_len >= esbq_max_qlen) && (eqp->eq_len > 0));

        eqp->eq_flags &= ~ESBQ_PROCESSING;
}

/*
 * taskq callback routine to free esballoced mblk's
 */
static void
esballoc_mblk_free(mblk_t *mp)
{
        mblk_t  *nextmp;

        for (; mp != NULL; mp = nextmp) {
                nextmp = mp->b_next;
                mp->b_next = NULL;
                mblk_free(mp);
        }
}

static void
esballoc_enqueue_mblk(mblk_t *mp)
{

        if (taskq_dispatch(system_taskq, (task_func_t *)esballoc_mblk_free, mp,
            TQ_NOSLEEP) == (uintptr_t)NULL) {
                mblk_t *first_mp = mp;
                /*
                 * System is low on resources and can't perform a non-sleeping
                 * dispatch. Schedule for a background thread.
                 */
                mutex_enter(&service_queue);
                STRSTAT(taskqfails);

                while (mp->b_next != NULL)
                        mp = mp->b_next;

                mp->b_next = freebs_list;
                freebs_list = first_mp;
                cv_signal(&services_to_run);
                mutex_exit(&service_queue);
        }
}

static void
esballoc_timer(void *arg)
{
        esb_queue_t *eqp = arg;

        mutex_enter(&eqp->eq_lock);
        eqp->eq_flags &= ~ESBQ_TIMER;

        if (!(eqp->eq_flags & ESBQ_PROCESSING) &&
            eqp->eq_len > 0)
                esballoc_process_queue(eqp);

        esballoc_set_timer(eqp, esbq_timeout);
        mutex_exit(&eqp->eq_lock);
}

static void
esballoc_set_timer(esb_queue_t *eqp, clock_t eq_timeout)
{
        ASSERT(MUTEX_HELD(&eqp->eq_lock));

        if (eqp->eq_len > 0 && !(eqp->eq_flags & ESBQ_TIMER)) {
                (void) timeout(esballoc_timer, eqp, eq_timeout);
                eqp->eq_flags |= ESBQ_TIMER;
        }
}

/*
 * Setup esbq array length based upon NCPU scaled by CPUs per
 * queue. Use static system_esbq until kmem_ready and we can
 * create an array in freebs_enqueue().
 */
void
esballoc_queue_init(void)
{
        esbq_log2_cpus_per_q = highbit(esbq_cpus_per_q - 1);
        esbq_cpus_per_q = 1 << esbq_log2_cpus_per_q;
        esbq_nelem = howmany(NCPU, esbq_cpus_per_q);
        system_esbq.eq_len = 0;
        system_esbq.eq_head = system_esbq.eq_tail = NULL;
        system_esbq.eq_flags = 0;
}

/*
 * Set the QBACK or QB_BACK flag in the given queue for
 * the given priority band.
 */
void
setqback(queue_t *q, unsigned char pri)
{
        int i;
        qband_t *qbp;
        qband_t **qbpp;

        ASSERT(MUTEX_HELD(QLOCK(q)));
        if (pri != 0) {
                if (pri > q->q_nband) {
                        qbpp = &q->q_bandp;
                        while (*qbpp)
                                qbpp = &(*qbpp)->qb_next;
                        while (pri > q->q_nband) {
                                if ((*qbpp = allocband()) == NULL) {
                                        cmn_err(CE_WARN,
                                            "setqback: can't allocate qband\n");
                                        return;
                                }
                                (*qbpp)->qb_hiwat = q->q_hiwat;
                                (*qbpp)->qb_lowat = q->q_lowat;
                                q->q_nband++;
                                qbpp = &(*qbpp)->qb_next;
                        }
                }
                qbp = q->q_bandp;
                i = pri;
                while (--i)
                        qbp = qbp->qb_next;
                qbp->qb_flag |= QB_BACK;
        } else {
                q->q_flag |= QBACK;
        }
}

int
strcopyin(void *from, void *to, size_t len, int copyflag)
{
        if (copyflag & U_TO_K) {
                ASSERT((copyflag & K_TO_K) == 0);
                if (copyin(from, to, len))
                        return (EFAULT);
        } else {
                ASSERT(copyflag & K_TO_K);
                bcopy(from, to, len);
        }
        return (0);
}

int
strcopyout(void *from, void *to, size_t len, int copyflag)
{
        if (copyflag & U_TO_K) {
                if (copyout(from, to, len))
                        return (EFAULT);
        } else {
                ASSERT(copyflag & K_TO_K);
                bcopy(from, to, len);
        }
        return (0);
}

/*
 * strsignal_nolock() posts a signal to the process(es) at the stream head.
 * It assumes that the stream head lock is already held, whereas strsignal()
 * acquires the lock first.  This routine was created because a few callers
 * release the stream head lock before calling only to re-acquire it after
 * it returns.
 */
void
strsignal_nolock(stdata_t *stp, int sig, uchar_t band)
{
        ASSERT(MUTEX_HELD(&stp->sd_lock));
        switch (sig) {
        case SIGPOLL:
                if (stp->sd_sigflags & S_MSG)
                        strsendsig(stp->sd_siglist, S_MSG, band, 0);
                break;
        default:
                if (stp->sd_pgidp)
                        pgsignal(stp->sd_pgidp, sig);
                break;
        }
}

void
strsignal(stdata_t *stp, int sig, int32_t band)
{
        TRACE_3(TR_FAC_STREAMS_FR, TR_SENDSIG,
            "strsignal:%p, %X, %X", stp, sig, band);

        mutex_enter(&stp->sd_lock);
        switch (sig) {
        case SIGPOLL:
                if (stp->sd_sigflags & S_MSG)
                        strsendsig(stp->sd_siglist, S_MSG, (uchar_t)band, 0);
                break;

        default:
                if (stp->sd_pgidp) {
                        pgsignal(stp->sd_pgidp, sig);
                }
                break;
        }
        mutex_exit(&stp->sd_lock);
}

void
strhup(stdata_t *stp)
{
        ASSERT(mutex_owned(&stp->sd_lock));
        pollwakeup(&stp->sd_pollist, POLLHUP);
        if (stp->sd_sigflags & S_HANGUP)
                strsendsig(stp->sd_siglist, S_HANGUP, 0, 0);
}

/*
 * Backenable the first queue upstream from `q' with a service procedure.
 */
void
backenable(queue_t *q, uchar_t pri)
{
        queue_t *nq;

        /*
         * Our presence might not prevent other modules in our own
         * stream from popping/pushing since the caller of getq might not
         * have a claim on the queue (some drivers do a getq on somebody
         * else's queue - they know that the queue itself is not going away
         * but the framework has to guarantee q_next in that stream).
         */
        claimstr(q);

        /* Find nearest back queue with service proc */
        for (nq = backq(q); nq && !nq->q_qinfo->qi_srvp; nq = backq(nq)) {
                ASSERT(STRMATED(q->q_stream) || STREAM(q) == STREAM(nq));
        }

        if (nq) {
                kthread_t *freezer;
                /*
                 * backenable can be called either with no locks held
                 * or with the stream frozen (the latter occurs when a module
                 * calls rmvq with the stream frozen). If the stream is frozen
                 * by the caller the caller will hold all qlocks in the stream.
                 * Note that a frozen stream doesn't freeze a mated stream,
                 * so we explicitly check for that.
                 */
                freezer = STREAM(q)->sd_freezer;
                if (freezer != curthread || STREAM(q) != STREAM(nq)) {
                        mutex_enter(QLOCK(nq));
                }
#ifdef DEBUG
                else {
                        ASSERT(frozenstr(q));
                        ASSERT(MUTEX_HELD(QLOCK(q)));
                        ASSERT(MUTEX_HELD(QLOCK(nq)));
                }
#endif
                setqback(nq, pri);
                qenable_locked(nq);
                if (freezer != curthread || STREAM(q) != STREAM(nq))
                        mutex_exit(QLOCK(nq));
        }
        releasestr(q);
}

/*
 * Return the appropriate errno when one of flags_to_check is set
 * in sd_flags. Uses the exported error routines if they are set.
 * Will return 0 if non error is set (or if the exported error routines
 * do not return an error).
 *
 * If there is both a read and write error to check, we prefer the read error.
 * Also, give preference to recorded errno's over the error functions.
 * The flags that are handled are:
 *      STPLEX          return EINVAL
 *      STRDERR         return sd_rerror (and clear if STRDERRNONPERSIST)
 *      STWRERR         return sd_werror (and clear if STWRERRNONPERSIST)
 *      STRHUP          return sd_werror
 *
 * If the caller indicates that the operation is a peek, a nonpersistent error
 * is not cleared.
 */
int
strgeterr(stdata_t *stp, int32_t flags_to_check, int ispeek)
{
        int32_t sd_flag = stp->sd_flag & flags_to_check;
        int error = 0;

        ASSERT(MUTEX_HELD(&stp->sd_lock));
        ASSERT((flags_to_check & ~(STRDERR|STWRERR|STRHUP|STPLEX)) == 0);
        if (sd_flag & STPLEX)
                error = EINVAL;
        else if (sd_flag & STRDERR) {
                error = stp->sd_rerror;
                if ((stp->sd_flag & STRDERRNONPERSIST) && !ispeek) {
                        /*
                         * Read errors are non-persistent i.e. discarded once
                         * returned to a non-peeking caller,
                         */
                        stp->sd_rerror = 0;
                        stp->sd_flag &= ~STRDERR;
                }
                if (error == 0 && stp->sd_rderrfunc != NULL) {
                        int clearerr = 0;

                        error = (*stp->sd_rderrfunc)(stp->sd_vnode, ispeek,
                            &clearerr);
                        if (clearerr) {
                                stp->sd_flag &= ~STRDERR;
                                stp->sd_rderrfunc = NULL;
                        }
                }
        } else if (sd_flag & STWRERR) {
                error = stp->sd_werror;
                if ((stp->sd_flag & STWRERRNONPERSIST) && !ispeek) {
                        /*
                         * Write errors are non-persistent i.e. discarded once
                         * returned to a non-peeking caller,
                         */
                        stp->sd_werror = 0;
                        stp->sd_flag &= ~STWRERR;
                }
                if (error == 0 && stp->sd_wrerrfunc != NULL) {
                        int clearerr = 0;

                        error = (*stp->sd_wrerrfunc)(stp->sd_vnode, ispeek,
                            &clearerr);
                        if (clearerr) {
                                stp->sd_flag &= ~STWRERR;
                                stp->sd_wrerrfunc = NULL;
                        }
                }
        } else if (sd_flag & STRHUP) {
                /* sd_werror set when STRHUP */
                error = stp->sd_werror;
        }
        return (error);
}


/*
 * Single-thread open/close/push/pop
 * for twisted streams also
 */
int
strstartplumb(stdata_t *stp, int flag, int cmd)
{
        int waited = 1;
        int error = 0;

        if (STRMATED(stp)) {
                struct stdata *stmatep = stp->sd_mate;

                STRLOCKMATES(stp);
                while (waited) {
                        waited = 0;
                        while (stmatep->sd_flag & (STWOPEN|STRCLOSE|STRPLUMB)) {
                                if ((cmd == I_POP) &&
                                    (flag & (FNDELAY|FNONBLOCK))) {
                                        STRUNLOCKMATES(stp);
                                        return (EAGAIN);
                                }
                                waited = 1;
                                mutex_exit(&stp->sd_lock);
                                if (!cv_wait_sig(&stmatep->sd_monitor,
                                    &stmatep->sd_lock)) {
                                        mutex_exit(&stmatep->sd_lock);
                                        return (EINTR);
                                }
                                mutex_exit(&stmatep->sd_lock);
                                STRLOCKMATES(stp);
                        }
                        while (stp->sd_flag & (STWOPEN|STRCLOSE|STRPLUMB)) {
                                if ((cmd == I_POP) &&
                                    (flag & (FNDELAY|FNONBLOCK))) {
                                        STRUNLOCKMATES(stp);
                                        return (EAGAIN);
                                }
                                waited = 1;
                                mutex_exit(&stmatep->sd_lock);
                                if (!cv_wait_sig(&stp->sd_monitor,
                                    &stp->sd_lock)) {
                                        mutex_exit(&stp->sd_lock);
                                        return (EINTR);
                                }
                                mutex_exit(&stp->sd_lock);
                                STRLOCKMATES(stp);
                        }
                        if (stp->sd_flag & (STRDERR|STWRERR|STRHUP|STPLEX)) {
                                error = strgeterr(stp,
                                    STRDERR|STWRERR|STRHUP|STPLEX, 0);
                                if (error != 0) {
                                        STRUNLOCKMATES(stp);
                                        return (error);
                                }
                        }
                }
                stp->sd_flag |= STRPLUMB;
                STRUNLOCKMATES(stp);
        } else {
                mutex_enter(&stp->sd_lock);
                while (stp->sd_flag & (STWOPEN|STRCLOSE|STRPLUMB)) {
                        if (((cmd == I_POP) || (cmd == _I_REMOVE)) &&
                            (flag & (FNDELAY|FNONBLOCK))) {
                                mutex_exit(&stp->sd_lock);
                                return (EAGAIN);
                        }
                        if (!cv_wait_sig(&stp->sd_monitor, &stp->sd_lock)) {
                                mutex_exit(&stp->sd_lock);
                                return (EINTR);
                        }
                        if (stp->sd_flag & (STRDERR|STWRERR|STRHUP|STPLEX)) {
                                error = strgeterr(stp,
                                    STRDERR|STWRERR|STRHUP|STPLEX, 0);
                                if (error != 0) {
                                        mutex_exit(&stp->sd_lock);
                                        return (error);
                                }
                        }
                }
                stp->sd_flag |= STRPLUMB;
                mutex_exit(&stp->sd_lock);
        }
        return (0);
}

/*
 * Complete the plumbing operation associated with stream `stp'.
 */
void
strendplumb(stdata_t *stp)
{
        ASSERT(MUTEX_HELD(&stp->sd_lock));
        ASSERT(stp->sd_flag & STRPLUMB);
        stp->sd_flag &= ~STRPLUMB;
        cv_broadcast(&stp->sd_monitor);
}

/*
 * This describes how the STREAMS framework handles synchronization
 * during open/push and close/pop.
 * The key interfaces for open and close are qprocson and qprocsoff,
 * respectively. While the close case in general is harder both open
 * have close have significant similarities.
 *
 * During close the STREAMS framework has to both ensure that there
 * are no stale references to the queue pair (and syncq) that
 * are being closed and also provide the guarantees that are documented
 * in qprocsoff(9F).
 * If there are stale references to the queue that is closing it can
 * result in kernel memory corruption or kernel panics.
 *
 * Note that is it up to the module/driver to ensure that it itself
 * does not have any stale references to the closing queues once its close
 * routine returns. This includes:
 *  - Cancelling any timeout/bufcall/qtimeout/qbufcall callback routines
 *    associated with the queues. For timeout and bufcall callbacks the
 *    module/driver also has to ensure (or wait for) any callbacks that
 *    are in progress.
 *  - If the module/driver is using esballoc it has to ensure that any
 *    esballoc free functions do not refer to a queue that has closed.
 *    (Note that in general the close routine can not wait for the esballoc'ed
 *    messages to be freed since that can cause a deadlock.)
 *  - Cancelling any interrupts that refer to the closing queues and
 *    also ensuring that there are no interrupts in progress that will
 *    refer to the closing queues once the close routine returns.
 *  - For multiplexors removing any driver global state that refers to
 *    the closing queue and also ensuring that there are no threads in
 *    the multiplexor that has picked up a queue pointer but not yet
 *    finished using it.
 *
 * In addition, a driver/module can only reference the q_next pointer
 * in its open, close, put, or service procedures or in a
 * qtimeout/qbufcall callback procedure executing "on" the correct
 * stream. Thus it can not reference the q_next pointer in an interrupt
 * routine or a timeout, bufcall or esballoc callback routine. Likewise
 * it can not reference q_next of a different queue e.g. in a mux that
 * passes messages from one queues put/service procedure to another queue.
 * In all the cases when the driver/module can not access the q_next
 * field it must use the *next* versions e.g. canputnext instead of
 * canput(q->q_next) and putnextctl instead of putctl(q->q_next, ...).
 *
 *
 * Assuming that the driver/module conforms to the above constraints
 * the STREAMS framework has to avoid stale references to q_next for all
 * the framework internal cases which include (but are not limited to):
 *  - Threads in canput/canputnext/backenable and elsewhere that are
 *    walking q_next.
 *  - Messages on a syncq that have a reference to the queue through b_queue.
 *  - Messages on an outer perimeter (syncq) that have a reference to the
 *    queue through b_queue.
 *  - Threads that use q_nfsrv (e.g. canput) to find a queue.
 *    Note that only canput and bcanput use q_nfsrv without any locking.
 *
 * The STREAMS framework providing the qprocsoff(9F) guarantees means that
 * after qprocsoff returns, the framework has to ensure that no threads can
 * enter the put or service routines for the closing read or write-side queue.
 * In addition to preventing "direct" entry into the put procedures
 * the framework also has to prevent messages being drained from
 * the syncq or the outer perimeter.
 * XXX Note that currently qdetach does relies on D_MTOCEXCL as the only
 * mechanism to prevent qwriter(PERIM_OUTER) from running after
 * qprocsoff has returned.
 * Note that if a module/driver uses put(9F) on one of its own queues
 * it is up to the module/driver to ensure that the put() doesn't
 * get called when the queue is closing.
 *
 *
 * The framework aspects of the above "contract" is implemented by
 * qprocsoff, removeq, and strlock:
 *  - qprocsoff (disable_svc) sets QWCLOSE to prevent runservice from
 *    entering the service procedures.
 *  - strlock acquires the sd_lock and sd_reflock to prevent putnext,
 *    canputnext, backenable etc from dereferencing the q_next that will
 *    soon change.
 *  - strlock waits for sd_refcnt to be zero to wait for e.g. any canputnext
 *    or other q_next walker that uses claimstr/releasestr to finish.
 *  - optionally for every syncq in the stream strlock acquires all the
 *    sq_lock's and waits for all sq_counts to drop to a value that indicates
 *    that no thread executes in the put or service procedures and that no
 *    thread is draining into the module/driver. This ensures that no
 *    open, close, put, service, or qtimeout/qbufcall callback procedure is
 *    currently executing hence no such thread can end up with the old stale
 *    q_next value and no canput/backenable can have the old stale
 *    q_nfsrv/q_next.
 *  - qdetach (wait_svc) makes sure that any scheduled or running threads
 *    have either finished or observed the QWCLOSE flag and gone away.
 */


/*
 * Get all the locks necessary to change q_next.
 *
 * Wait for sd_refcnt to reach 0 and, if sqlist is present, wait for the
 * sq_count of each syncq in the list to drop to sq_rmqcount, indicating that
 * the only threads inside the syncq are threads currently calling removeq().
 * Since threads calling removeq() are in the process of removing their queues
 * from the stream, we do not need to worry about them accessing a stale q_next
 * pointer and thus we do not need to wait for them to exit (in fact, waiting
 * for them can cause deadlock).
 *
 * This routine is subject to starvation since it does not set any flag to
 * prevent threads from entering a module in the stream (i.e. sq_count can
 * increase on some syncq while it is waiting on some other syncq).
 *
 * Assumes that only one thread attempts to call strlock for a given
 * stream. If this is not the case the two threads would deadlock.
 * This assumption is guaranteed since strlock is only called by insertq
 * and removeq and streams plumbing changes are single-threaded for
 * a given stream using the STWOPEN, STRCLOSE, and STRPLUMB flags.
 *
 * For pipes, it is not difficult to atomically designate a pair of streams
 * to be mated. Once mated atomically by the framework the twisted pair remain
 * configured that way until dismantled atomically by the framework.
 * When plumbing takes place on a twisted stream it is necessary to ensure that
 * this operation is done exclusively on the twisted stream since two such
 * operations, each initiated on different ends of the pipe will deadlock
 * waiting for each other to complete.
 *
 * On entry, no locks should be held.
 * The locks acquired and held by strlock depends on a few factors.
 * - If sqlist is non-NULL all the syncq locks in the sqlist will be acquired
 *   and held on exit and all sq_count are at an acceptable level.
 * - In all cases, sd_lock and sd_reflock are acquired and held on exit with
 *   sd_refcnt being zero.
 */

static void
strlock(struct stdata *stp, sqlist_t *sqlist)
{
        syncql_t *sql, *sql2;
retry:
        /*
         * Wait for any claimstr to go away.
         */
        if (STRMATED(stp)) {
                struct stdata *stp1, *stp2;

                STRLOCKMATES(stp);
                /*
                 * Note that the selection of locking order is not
                 * important, just that they are always acquired in
                 * the same order.  To assure this, we choose this
                 * order based on the value of the pointer, and since
                 * the pointer will not change for the life of this
                 * pair, we will always grab the locks in the same
                 * order (and hence, prevent deadlocks).
                 */
                if (&(stp->sd_lock) > &((stp->sd_mate)->sd_lock)) {
                        stp1 = stp;
                        stp2 = stp->sd_mate;
                } else {
                        stp2 = stp;
                        stp1 = stp->sd_mate;
                }
                mutex_enter(&stp1->sd_reflock);
                if (stp1->sd_refcnt > 0) {
                        STRUNLOCKMATES(stp);
                        cv_wait(&stp1->sd_refmonitor, &stp1->sd_reflock);
                        mutex_exit(&stp1->sd_reflock);
                        goto retry;
                }
                mutex_enter(&stp2->sd_reflock);
                if (stp2->sd_refcnt > 0) {
                        STRUNLOCKMATES(stp);
                        mutex_exit(&stp1->sd_reflock);
                        cv_wait(&stp2->sd_refmonitor, &stp2->sd_reflock);
                        mutex_exit(&stp2->sd_reflock);
                        goto retry;
                }
                STREAM_PUTLOCKS_ENTER(stp1);
                STREAM_PUTLOCKS_ENTER(stp2);
        } else {
                mutex_enter(&stp->sd_lock);
                mutex_enter(&stp->sd_reflock);
                while (stp->sd_refcnt > 0) {
                        mutex_exit(&stp->sd_lock);
                        cv_wait(&stp->sd_refmonitor, &stp->sd_reflock);
                        if (mutex_tryenter(&stp->sd_lock) == 0) {
                                mutex_exit(&stp->sd_reflock);
                                mutex_enter(&stp->sd_lock);
                                mutex_enter(&stp->sd_reflock);
                        }
                }
                STREAM_PUTLOCKS_ENTER(stp);
        }

        if (sqlist == NULL)
                return;

        for (sql = sqlist->sqlist_head; sql; sql = sql->sql_next) {
                syncq_t *sq = sql->sql_sq;
                uint16_t count;

                mutex_enter(SQLOCK(sq));
                count = sq->sq_count;
                ASSERT(sq->sq_rmqcount <= count);
                SQ_PUTLOCKS_ENTER(sq);
                SUM_SQ_PUTCOUNTS(sq, count);
                if (count == sq->sq_rmqcount)
                        continue;

                /* Failed - drop all locks that we have acquired so far */
                if (STRMATED(stp)) {
                        STREAM_PUTLOCKS_EXIT(stp);
                        STREAM_PUTLOCKS_EXIT(stp->sd_mate);
                        STRUNLOCKMATES(stp);
                        mutex_exit(&stp->sd_reflock);
                        mutex_exit(&stp->sd_mate->sd_reflock);
                } else {
                        STREAM_PUTLOCKS_EXIT(stp);
                        mutex_exit(&stp->sd_lock);
                        mutex_exit(&stp->sd_reflock);
                }
                for (sql2 = sqlist->sqlist_head; sql2 != sql;
                    sql2 = sql2->sql_next) {
                        SQ_PUTLOCKS_EXIT(sql2->sql_sq);
                        mutex_exit(SQLOCK(sql2->sql_sq));
                }

                /*
                 * The wait loop below may starve when there are many threads
                 * claiming the syncq. This is especially a problem with permod
                 * syncqs (IP). To lessen the impact of the problem we increment
                 * sq_needexcl and clear fastbits so that putnexts will slow
                 * down and call sqenable instead of draining right away.
                 */
                sq->sq_needexcl++;
                SQ_PUTCOUNT_CLRFAST_LOCKED(sq);
                while (count > sq->sq_rmqcount) {
                        sq->sq_flags |= SQ_WANTWAKEUP;
                        SQ_PUTLOCKS_EXIT(sq);
                        cv_wait(&sq->sq_wait, SQLOCK(sq));
                        count = sq->sq_count;
                        SQ_PUTLOCKS_ENTER(sq);
                        SUM_SQ_PUTCOUNTS(sq, count);
                }
                sq->sq_needexcl--;
                if (sq->sq_needexcl == 0)
                        SQ_PUTCOUNT_SETFAST_LOCKED(sq);
                SQ_PUTLOCKS_EXIT(sq);
                ASSERT(count == sq->sq_rmqcount);
                mutex_exit(SQLOCK(sq));
                goto retry;
        }
}

/*
 * Drop all the locks that strlock acquired.
 */
static void
strunlock(struct stdata *stp, sqlist_t *sqlist)
{
        syncql_t *sql;

        if (STRMATED(stp)) {
                STREAM_PUTLOCKS_EXIT(stp);
                STREAM_PUTLOCKS_EXIT(stp->sd_mate);
                STRUNLOCKMATES(stp);
                mutex_exit(&stp->sd_reflock);
                mutex_exit(&stp->sd_mate->sd_reflock);
        } else {
                STREAM_PUTLOCKS_EXIT(stp);
                mutex_exit(&stp->sd_lock);
                mutex_exit(&stp->sd_reflock);
        }

        if (sqlist == NULL)
                return;

        for (sql = sqlist->sqlist_head; sql; sql = sql->sql_next) {
                SQ_PUTLOCKS_EXIT(sql->sql_sq);
                mutex_exit(SQLOCK(sql->sql_sq));
        }
}

/*
 * When the module has service procedure, we need check if the next
 * module which has service procedure is in flow control to trigger
 * the backenable.
 */
static void
backenable_insertedq(queue_t *q)
{
        qband_t *qbp;

        claimstr(q);
        if (q->q_qinfo->qi_srvp != NULL && q->q_next != NULL) {
                if (q->q_next->q_nfsrv->q_flag & QWANTW)
                        backenable(q, 0);

                qbp = q->q_next->q_nfsrv->q_bandp;
                for (; qbp != NULL; qbp = qbp->qb_next)
                        if ((qbp->qb_flag & QB_WANTW) && qbp->qb_first != NULL)
                                backenable(q, qbp->qb_first->b_band);
        }
        releasestr(q);
}

/*
 * Given two read queues, insert a new single one after another.
 *
 * This routine acquires all the necessary locks in order to change
 * q_next and related pointer using strlock().
 * It depends on the stream head ensuring that there are no concurrent
 * insertq or removeq on the same stream. The stream head ensures this
 * using the flags STWOPEN, STRCLOSE, and STRPLUMB.
 *
 * Note that no syncq locks are held during the q_next change. This is
 * applied to all streams since, unlike removeq, there is no problem of stale
 * pointers when adding a module to the stream. Thus drivers/modules that do a
 * canput(rq->q_next) would never get a closed/freed queue pointer even if we
 * applied this optimization to all streams.
 */
void
insertq(struct stdata *stp, queue_t *new)
{
        queue_t *after;
        queue_t *wafter;
        queue_t *wnew = _WR(new);
        boolean_t have_fifo = B_FALSE;

        if (new->q_flag & _QINSERTING) {
                ASSERT(stp->sd_vnode->v_type != VFIFO);
                after = new->q_next;
                wafter = _WR(new->q_next);
        } else {
                after = _RD(stp->sd_wrq);
                wafter = stp->sd_wrq;
        }

        TRACE_2(TR_FAC_STREAMS_FR, TR_INSERTQ,
            "insertq:%p, %p", after, new);
        ASSERT(after->q_flag & QREADR);
        ASSERT(new->q_flag & QREADR);

        strlock(stp, NULL);

        /* Do we have a FIFO? */
        if (wafter->q_next == after) {
                have_fifo = B_TRUE;
                wnew->q_next = new;
        } else {
                wnew->q_next = wafter->q_next;
        }
        new->q_next = after;

        set_nfsrv_ptr(new, wnew, after, wafter);
        /*
         * set_nfsrv_ptr() needs to know if this is an insertion or not,
         * so only reset this flag after calling it.
         */
        new->q_flag &= ~_QINSERTING;

        if (have_fifo) {
                wafter->q_next = wnew;
        } else {
                if (wafter->q_next)
                        _OTHERQ(wafter->q_next)->q_next = new;
                wafter->q_next = wnew;
        }

        set_qend(new);
        /* The QEND flag might have to be updated for the upstream guy */
        set_qend(after);

        ASSERT(_SAMESTR(new) == O_SAMESTR(new));
        ASSERT(_SAMESTR(wnew) == O_SAMESTR(wnew));
        ASSERT(_SAMESTR(after) == O_SAMESTR(after));
        ASSERT(_SAMESTR(wafter) == O_SAMESTR(wafter));
        strsetuio(stp);

        /*
         * If this was a module insertion, bump the push count.
         */
        if (!(new->q_flag & QISDRV))
                stp->sd_pushcnt++;

        strunlock(stp, NULL);

        /* check if the write Q needs backenable */
        backenable_insertedq(wnew);

        /* check if the read Q needs backenable */
        backenable_insertedq(new);
}

/*
 * Given a read queue, unlink it from any neighbors.
 *
 * This routine acquires all the necessary locks in order to
 * change q_next and related pointers and also guard against
 * stale references (e.g. through q_next) to the queue that
 * is being removed. It also plays part of the role in ensuring
 * that the module's/driver's put procedure doesn't get called
 * after qprocsoff returns.
 *
 * Removeq depends on the stream head ensuring that there are
 * no concurrent insertq or removeq on the same stream. The
 * stream head ensures this using the flags STWOPEN, STRCLOSE and
 * STRPLUMB.
 *
 * The set of locks needed to remove the queue is different in
 * different cases:
 *
 * Acquire sd_lock, sd_reflock, and all the syncq locks in the stream after
 * waiting for the syncq reference count to drop to 0 indicating that no
 * non-close threads are present anywhere in the stream. This ensures that any
 * module/driver can reference q_next in its open, close, put, or service
 * procedures.
 *
 * The sq_rmqcount counter tracks the number of threads inside removeq().
 * strlock() ensures that there is either no threads executing inside perimeter
 * or there is only a thread calling qprocsoff().
 *
 * strlock() compares the value of sq_count with the number of threads inside
 * removeq() and waits until sq_count is equal to sq_rmqcount. We need to wakeup
 * any threads waiting in strlock() when the sq_rmqcount increases.
 */

void
removeq(queue_t *qp)
{
        queue_t *wqp = _WR(qp);
        struct stdata *stp = STREAM(qp);
        sqlist_t *sqlist = NULL;
        boolean_t isdriver;
        int moved;
        syncq_t *sq = qp->q_syncq;
        syncq_t *wsq = wqp->q_syncq;

        ASSERT(stp);

        TRACE_2(TR_FAC_STREAMS_FR, TR_REMOVEQ,
            "removeq:%p %p", qp, wqp);
        ASSERT(qp->q_flag&QREADR);

        /*
         * For queues using Synchronous streams, we must wait for all threads in
         * rwnext() to drain out before proceeding.
         */
        if (qp->q_flag & QSYNCSTR) {
                /* First, we need wakeup any threads blocked in rwnext() */
                mutex_enter(SQLOCK(sq));
                if (sq->sq_flags & SQ_WANTWAKEUP) {
                        sq->sq_flags &= ~SQ_WANTWAKEUP;
                        cv_broadcast(&sq->sq_wait);
                }
                mutex_exit(SQLOCK(sq));

                if (wsq != sq) {
                        mutex_enter(SQLOCK(wsq));
                        if (wsq->sq_flags & SQ_WANTWAKEUP) {
                                wsq->sq_flags &= ~SQ_WANTWAKEUP;
                                cv_broadcast(&wsq->sq_wait);
                        }
                        mutex_exit(SQLOCK(wsq));
                }

                mutex_enter(QLOCK(qp));
                while (qp->q_rwcnt > 0) {
                        qp->q_flag |= QWANTRMQSYNC;
                        cv_wait(&qp->q_wait, QLOCK(qp));
                }
                mutex_exit(QLOCK(qp));

                mutex_enter(QLOCK(wqp));
                while (wqp->q_rwcnt > 0) {
                        wqp->q_flag |= QWANTRMQSYNC;
                        cv_wait(&wqp->q_wait, QLOCK(wqp));
                }
                mutex_exit(QLOCK(wqp));
        }

        mutex_enter(SQLOCK(sq));
        sq->sq_rmqcount++;
        if (sq->sq_flags & SQ_WANTWAKEUP) {
                sq->sq_flags &= ~SQ_WANTWAKEUP;
                cv_broadcast(&sq->sq_wait);
        }
        mutex_exit(SQLOCK(sq));

        isdriver = (qp->q_flag & QISDRV);

        sqlist = sqlist_build(qp, stp, STRMATED(stp));
        strlock(stp, sqlist);

        reset_nfsrv_ptr(qp, wqp);

        ASSERT(wqp->q_next == NULL || backq(qp)->q_next == qp);
        ASSERT(qp->q_next == NULL || backq(wqp)->q_next == wqp);
        /* Do we have a FIFO? */
        if (wqp->q_next == qp) {
                stp->sd_wrq->q_next = _RD(stp->sd_wrq);
        } else {
                if (wqp->q_next)
                        backq(qp)->q_next = qp->q_next;
                if (qp->q_next)
                        backq(wqp)->q_next = wqp->q_next;
        }

        /* The QEND flag might have to be updated for the upstream guy */
        if (qp->q_next)
                set_qend(qp->q_next);

        ASSERT(_SAMESTR(stp->sd_wrq) == O_SAMESTR(stp->sd_wrq));
        ASSERT(_SAMESTR(_RD(stp->sd_wrq)) == O_SAMESTR(_RD(stp->sd_wrq)));

        /*
         * Move any messages destined for the put procedures to the next
         * syncq in line. Otherwise free them.
         */
        moved = 0;
        /*
         * Quick check to see whether there are any messages or events.
         */
        if (qp->q_syncqmsgs != 0 || (qp->q_syncq->sq_flags & SQ_EVENTS))
                moved += propagate_syncq(qp);
        if (wqp->q_syncqmsgs != 0 ||
            (wqp->q_syncq->sq_flags & SQ_EVENTS))
                moved += propagate_syncq(wqp);

        strsetuio(stp);

        /*
         * If this was a module removal, decrement the push count.
         */
        if (!isdriver)
                stp->sd_pushcnt--;

        strunlock(stp, sqlist);
        sqlist_free(sqlist);

        /*
         * Make sure any messages that were propagated are drained.
         * Also clear any QFULL bit caused by messages that were propagated.
         */

        if (qp->q_next != NULL) {
                clr_qfull(qp);
                /*
                 * For the driver calling qprocsoff, propagate_syncq
                 * frees all the messages instead of putting it in
                 * the stream head
                 */
                if (!isdriver && (moved > 0))
                        emptysq(qp->q_next->q_syncq);
        }
        if (wqp->q_next != NULL) {
                clr_qfull(wqp);
                /*
                 * We come here for any pop of a module except for the
                 * case of driver being removed. We don't call emptysq
                 * if we did not move any messages. This will avoid holding
                 * PERMOD syncq locks in emptysq
                 */
                if (moved > 0)
                        emptysq(wqp->q_next->q_syncq);
        }

        mutex_enter(SQLOCK(sq));
        sq->sq_rmqcount--;
        mutex_exit(SQLOCK(sq));
}

/*
 * Prevent further entry by setting a flag (like SQ_FROZEN, SQ_BLOCKED or
 * SQ_WRITER) on a syncq.
 * If maxcnt is not -1 it assumes that caller has "maxcnt" claim(s) on the
 * sync queue and waits until sq_count reaches maxcnt.
 *
 * If maxcnt is -1 there's no need to grab sq_putlocks since the caller
 * does not care about putnext threads that are in the middle of calling put
 * entry points.
 *
 * This routine is used for both inner and outer syncqs.
 */
static void
blocksq(syncq_t *sq, ushort_t flag, int maxcnt)
{
        uint16_t count = 0;

        mutex_enter(SQLOCK(sq));
        /*
         * Wait for SQ_FROZEN/SQ_BLOCKED to be reset.
         * SQ_FROZEN will be set if there is a frozen stream that has a
         * queue which also refers to this "shared" syncq.
         * SQ_BLOCKED will be set if there is "off" queue which also
         * refers to this "shared" syncq.
         */
        if (maxcnt != -1) {
                count = sq->sq_count;
                SQ_PUTLOCKS_ENTER(sq);
                SQ_PUTCOUNT_CLRFAST_LOCKED(sq);
                SUM_SQ_PUTCOUNTS(sq, count);
        }
        sq->sq_needexcl++;
        ASSERT(sq->sq_needexcl != 0);   /* wraparound */

        while ((sq->sq_flags & flag) ||
            (maxcnt != -1 && count > (unsigned)maxcnt)) {
                sq->sq_flags |= SQ_WANTWAKEUP;
                if (maxcnt != -1) {
                        SQ_PUTLOCKS_EXIT(sq);
                }
                cv_wait(&sq->sq_wait, SQLOCK(sq));
                if (maxcnt != -1) {
                        count = sq->sq_count;
                        SQ_PUTLOCKS_ENTER(sq);
                        SUM_SQ_PUTCOUNTS(sq, count);
                }
        }
        sq->sq_needexcl--;
        sq->sq_flags |= flag;
        ASSERT(maxcnt == -1 || count == maxcnt);
        if (maxcnt != -1) {
                if (sq->sq_needexcl == 0) {
                        SQ_PUTCOUNT_SETFAST_LOCKED(sq);
                }
                SQ_PUTLOCKS_EXIT(sq);
        } else if (sq->sq_needexcl == 0) {
                SQ_PUTCOUNT_SETFAST(sq);
        }

        mutex_exit(SQLOCK(sq));
}

/*
 * Reset a flag that was set with blocksq.
 *
 * Can not use this routine to reset SQ_WRITER.
 *
 * If "isouter" is set then the syncq is assumed to be an outer perimeter
 * and drain_syncq is not called. Instead we rely on the qwriter_outer thread
 * to handle the queued qwriter operations.
 *
 * No need to grab sq_putlocks here. See comment in strsubr.h that explains when
 * sq_putlocks are used.
 */
static void
unblocksq(syncq_t *sq, uint16_t resetflag, int isouter)
{
        uint16_t flags;

        mutex_enter(SQLOCK(sq));
        ASSERT(resetflag != SQ_WRITER);
        ASSERT(sq->sq_flags & resetflag);
        flags = sq->sq_flags & ~resetflag;
        sq->sq_flags = flags;
        if (flags & (SQ_QUEUED | SQ_WANTWAKEUP)) {
                if (flags & SQ_WANTWAKEUP) {
                        flags &= ~SQ_WANTWAKEUP;
                        cv_broadcast(&sq->sq_wait);
                }
                sq->sq_flags = flags;
                if ((flags & SQ_QUEUED) && !(flags & (SQ_STAYAWAY|SQ_EXCL))) {
                        if (!isouter) {
                                /* drain_syncq drops SQLOCK */
                                drain_syncq(sq);
                                return;
                        }
                }
        }
        mutex_exit(SQLOCK(sq));
}

/*
 * Reset a flag that was set with blocksq.
 * Does not drain the syncq. Use emptysq() for that.
 * Returns 1 if SQ_QUEUED is set. Otherwise 0.
 *
 * No need to grab sq_putlocks here. See comment in strsubr.h that explains when
 * sq_putlocks are used.
 */
static int
dropsq(syncq_t *sq, uint16_t resetflag)
{
        uint16_t flags;

        mutex_enter(SQLOCK(sq));
        ASSERT(sq->sq_flags & resetflag);
        flags = sq->sq_flags & ~resetflag;
        if (flags & SQ_WANTWAKEUP) {
                flags &= ~SQ_WANTWAKEUP;
                cv_broadcast(&sq->sq_wait);
        }
        sq->sq_flags = flags;
        mutex_exit(SQLOCK(sq));
        if (flags & SQ_QUEUED)
                return (1);
        return (0);
}

/*
 * Empty all the messages on a syncq.
 *
 * No need to grab sq_putlocks here. See comment in strsubr.h that explains when
 * sq_putlocks are used.
 */
static void
emptysq(syncq_t *sq)
{
        uint16_t flags;

        mutex_enter(SQLOCK(sq));
        flags = sq->sq_flags;
        if ((flags & SQ_QUEUED) && !(flags & (SQ_STAYAWAY|SQ_EXCL))) {
                /*
                 * To prevent potential recursive invocation of drain_syncq we
                 * do not call drain_syncq if count is non-zero.
                 */
                if (sq->sq_count == 0) {
                        /* drain_syncq() drops SQLOCK */
                        drain_syncq(sq);
                        return;
                } else
                        sqenable(sq);
        }
        mutex_exit(SQLOCK(sq));
}

/*
 * Ordered insert while removing duplicates.
 */
static void
sqlist_insert(sqlist_t *sqlist, syncq_t *sqp)
{
        syncql_t *sqlp, **prev_sqlpp, *new_sqlp;

        prev_sqlpp = &sqlist->sqlist_head;
        while ((sqlp = *prev_sqlpp) != NULL) {
                if (sqlp->sql_sq >= sqp) {
                        if (sqlp->sql_sq == sqp)        /* duplicate */
                                return;
                        break;
                }
                prev_sqlpp = &sqlp->sql_next;
        }
        new_sqlp = &sqlist->sqlist_array[sqlist->sqlist_index++];
        ASSERT((char *)new_sqlp < (char *)sqlist + sqlist->sqlist_size);
        new_sqlp->sql_next = sqlp;
        new_sqlp->sql_sq = sqp;
        *prev_sqlpp = new_sqlp;
}

/*
 * Walk the write side queues until we hit either the driver
 * or a twist in the stream (_SAMESTR will return false in both
 * these cases) then turn around and walk the read side queues
 * back up to the stream head.
 */
static void
sqlist_insertall(sqlist_t *sqlist, queue_t *q)
{
        while (q != NULL) {
                sqlist_insert(sqlist, q->q_syncq);

                if (_SAMESTR(q))
                        q = q->q_next;
                else if (!(q->q_flag & QREADR))
                        q = _RD(q);
                else
                        q = NULL;
        }
}

/*
 * Allocate and build a list of all syncqs in a stream and the syncq(s)
 * associated with the "q" parameter. The resulting list is sorted in a
 * canonical order and is free of duplicates.
 * Assumes the passed queue is a _RD(q).
 */
static sqlist_t *
sqlist_build(queue_t *q, struct stdata *stp, boolean_t do_twist)
{
        sqlist_t *sqlist = sqlist_alloc(stp, KM_SLEEP);

        /*
         * start with the current queue/qpair
         */
        ASSERT(q->q_flag & QREADR);

        sqlist_insert(sqlist, q->q_syncq);
        sqlist_insert(sqlist, _WR(q)->q_syncq);

        sqlist_insertall(sqlist, stp->sd_wrq);
        if (do_twist)
                sqlist_insertall(sqlist, stp->sd_mate->sd_wrq);

        return (sqlist);
}

static sqlist_t *
sqlist_alloc(struct stdata *stp, int kmflag)
{
        size_t sqlist_size;
        sqlist_t *sqlist;

        /*
         * Allocate 2 syncql_t's for each pushed module. Note that
         * the sqlist_t structure already has 4 syncql_t's built in:
         * 2 for the stream head, and 2 for the driver/other stream head.
         */
        sqlist_size = 2 * sizeof (syncql_t) * stp->sd_pushcnt +
            sizeof (sqlist_t);
        if (STRMATED(stp))
                sqlist_size += 2 * sizeof (syncql_t) * stp->sd_mate->sd_pushcnt;
        sqlist = kmem_alloc(sqlist_size, kmflag);

        sqlist->sqlist_head = NULL;
        sqlist->sqlist_size = sqlist_size;
        sqlist->sqlist_index = 0;

        return (sqlist);
}

/*
 * Free the list created by sqlist_alloc()
 */
static void
sqlist_free(sqlist_t *sqlist)
{
        kmem_free(sqlist, sqlist->sqlist_size);
}

/*
 * Prevent any new entries into any syncq in this stream.
 * Used by freezestr.
 */
void
strblock(queue_t *q)
{
        struct stdata   *stp;
        syncql_t        *sql;
        sqlist_t        *sqlist;

        q = _RD(q);

        stp = STREAM(q);
        ASSERT(stp != NULL);

        /*
         * Get a sorted list with all the duplicates removed containing
         * all the syncqs referenced by this stream.
         */
        sqlist = sqlist_build(q, stp, B_FALSE);
        for (sql = sqlist->sqlist_head; sql != NULL; sql = sql->sql_next)
                blocksq(sql->sql_sq, SQ_FROZEN, -1);
        sqlist_free(sqlist);
}

/*
 * Release the block on new entries into this stream
 */
void
strunblock(queue_t *q)
{
        struct stdata   *stp;
        syncql_t        *sql;
        sqlist_t        *sqlist;
        int             drain_needed;

        q = _RD(q);

        /*
         * Get a sorted list with all the duplicates removed containing
         * all the syncqs referenced by this stream.
         * Have to drop the SQ_FROZEN flag on all the syncqs before
         * starting to drain them; otherwise the draining might
         * cause a freezestr in some module on the stream (which
         * would deadlock).
         */
        stp = STREAM(q);
        ASSERT(stp != NULL);
        sqlist = sqlist_build(q, stp, B_FALSE);
        drain_needed = 0;
        for (sql = sqlist->sqlist_head; sql != NULL; sql = sql->sql_next)
                drain_needed += dropsq(sql->sql_sq, SQ_FROZEN);
        if (drain_needed) {
                for (sql = sqlist->sqlist_head; sql != NULL;
                    sql = sql->sql_next)
                        emptysq(sql->sql_sq);
        }
        sqlist_free(sqlist);
}

#ifdef DEBUG
static int
qprocsareon(queue_t *rq)
{
        if (rq->q_next == NULL)
                return (0);
        return (_WR(rq->q_next)->q_next == _WR(rq));
}

int
qclaimed(queue_t *q)
{
        uint_t count;

        count = q->q_syncq->sq_count;
        SUM_SQ_PUTCOUNTS(q->q_syncq, count);
        return (count != 0);
}

/*
 * Check if anyone has frozen this stream with freezestr
 */
int
frozenstr(queue_t *q)
{
        return ((q->q_syncq->sq_flags & SQ_FROZEN) != 0);
}
#endif /* DEBUG */

/*
 * Enter a queue.
 * Obsoleted interface. Should not be used.
 */
void
enterq(queue_t *q)
{
        entersq(q->q_syncq, SQ_CALLBACK);
}

void
leaveq(queue_t *q)
{
        leavesq(q->q_syncq, SQ_CALLBACK);
}

/*
 * Enter a perimeter. c_inner and c_outer specifies which concurrency bits
 * to check.
 * Wait if SQ_QUEUED is set to preserve ordering between messages and qwriter
 * calls and the running of open, close and service procedures.
 *
 * If c_inner bit is set no need to grab sq_putlocks since we don't care
 * if other threads have entered or are entering put entry point.
 *
 * If c_inner bit is set it might have been possible to use
 * sq_putlocks/sq_putcounts instead of SQLOCK/sq_count (e.g. to optimize
 * open/close path for IP) but since the count may need to be decremented in
 * qwait() we wouldn't know which counter to decrement. Currently counter is
 * selected by current cpu_seqid and current CPU can change at any moment. XXX
 * in the future we might use curthread id bits to select the counter and this
 * would stay constant across routine calls.
 */
void
entersq(syncq_t *sq, int entrypoint)
{
        uint16_t        count = 0;
        uint16_t        flags;
        uint16_t        waitflags = SQ_STAYAWAY | SQ_EVENTS | SQ_EXCL;
        uint16_t        type;
        uint_t          c_inner = entrypoint & SQ_CI;
        uint_t          c_outer = entrypoint & SQ_CO;

        /*
         * Increment ref count to keep closes out of this queue.
         */
        ASSERT(sq);
        ASSERT(c_inner && c_outer);
        mutex_enter(SQLOCK(sq));
        flags = sq->sq_flags;
        type = sq->sq_type;
        if (!(type & c_inner)) {
                /* Make sure all putcounts now use slowlock. */
                count = sq->sq_count;
                SQ_PUTLOCKS_ENTER(sq);
                SQ_PUTCOUNT_CLRFAST_LOCKED(sq);
                SUM_SQ_PUTCOUNTS(sq, count);
                sq->sq_needexcl++;
                ASSERT(sq->sq_needexcl != 0);   /* wraparound */
                waitflags |= SQ_MESSAGES;
        }
        /*
         * Wait until we can enter the inner perimeter.
         * If we want exclusive access we wait until sq_count is 0.
         * We have to do this before entering the outer perimeter in order
         * to preserve put/close message ordering.
         */
        while ((flags & waitflags) || (!(type & c_inner) && count != 0)) {
                sq->sq_flags = flags | SQ_WANTWAKEUP;
                if (!(type & c_inner)) {
                        SQ_PUTLOCKS_EXIT(sq);
                }
                cv_wait(&sq->sq_wait, SQLOCK(sq));
                if (!(type & c_inner)) {
                        count = sq->sq_count;
                        SQ_PUTLOCKS_ENTER(sq);
                        SUM_SQ_PUTCOUNTS(sq, count);
                }
                flags = sq->sq_flags;
        }

        if (!(type & c_inner)) {
                ASSERT(sq->sq_needexcl > 0);
                sq->sq_needexcl--;
                if (sq->sq_needexcl == 0) {
                        SQ_PUTCOUNT_SETFAST_LOCKED(sq);
                }
        }

        /* Check if we need to enter the outer perimeter */
        if (!(type & c_outer)) {
                /*
                 * We have to enter the outer perimeter exclusively before
                 * we can increment sq_count to avoid deadlock. This implies
                 * that we have to re-check sq_flags and sq_count.
                 *
                 * is it possible to have c_inner set when c_outer is not set?
                 */
                if (!(type & c_inner)) {
                        SQ_PUTLOCKS_EXIT(sq);
                }
                mutex_exit(SQLOCK(sq));
                outer_enter(sq->sq_outer, SQ_GOAWAY);
                mutex_enter(SQLOCK(sq));
                flags = sq->sq_flags;
                /*
                 * there should be no need to recheck sq_putcounts
                 * because outer_enter() has already waited for them to clear
                 * after setting SQ_WRITER.
                 */
                count = sq->sq_count;
#ifdef DEBUG
                /*
                 * SUMCHECK_SQ_PUTCOUNTS should return the sum instead
                 * of doing an ASSERT internally. Others should do
                 * something like
                 *       ASSERT(SUMCHECK_SQ_PUTCOUNTS(sq) == 0);
                 * without the need to #ifdef DEBUG it.
                 */
                SUMCHECK_SQ_PUTCOUNTS(sq, 0);
#endif
                while ((flags & (SQ_EXCL|SQ_BLOCKED|SQ_FROZEN)) ||
                    (!(type & c_inner) && count != 0)) {
                        sq->sq_flags = flags | SQ_WANTWAKEUP;
                        cv_wait(&sq->sq_wait, SQLOCK(sq));
                        count = sq->sq_count;
                        flags = sq->sq_flags;
                }
        }

        sq->sq_count++;
        ASSERT(sq->sq_count != 0);      /* Wraparound */
        if (!(type & c_inner)) {
                /* Exclusive entry */
                ASSERT(sq->sq_count == 1);
                sq->sq_flags |= SQ_EXCL;
                if (type & c_outer) {
                        SQ_PUTLOCKS_EXIT(sq);
                }
        }
        mutex_exit(SQLOCK(sq));
}

/*
 * Leave a syncq. Announce to framework that closes may proceed.
 * c_inner and c_outer specify which concurrency bits to check.
 *
 * Must never be called from driver or module put entry point.
 *
 * No need to grab sq_putlocks here. See comment in strsubr.h that explains when
 * sq_putlocks are used.
 */
void
leavesq(syncq_t *sq, int entrypoint)
{
        uint16_t        flags;
        uint16_t        type;
        uint_t          c_outer = entrypoint & SQ_CO;
#ifdef DEBUG
        uint_t          c_inner = entrypoint & SQ_CI;
#endif

        /*
         * Decrement ref count, drain the syncq if possible, and wake up
         * any waiting close.
         */
        ASSERT(sq);
        ASSERT(c_inner && c_outer);
        mutex_enter(SQLOCK(sq));
        flags = sq->sq_flags;
        type = sq->sq_type;
        if (flags & (SQ_QUEUED|SQ_WANTWAKEUP|SQ_WANTEXWAKEUP)) {

                if (flags & SQ_WANTWAKEUP) {
                        flags &= ~SQ_WANTWAKEUP;
                        cv_broadcast(&sq->sq_wait);
                }
                if (flags & SQ_WANTEXWAKEUP) {
                        flags &= ~SQ_WANTEXWAKEUP;
                        cv_broadcast(&sq->sq_exitwait);
                }

                if ((flags & SQ_QUEUED) && !(flags & SQ_STAYAWAY)) {
                        /*
                         * The syncq needs to be drained. "Exit" the syncq
                         * before calling drain_syncq.
                         */
                        ASSERT(sq->sq_count != 0);
                        sq->sq_count--;
                        ASSERT((flags & SQ_EXCL) || (type & c_inner));
                        sq->sq_flags = flags & ~SQ_EXCL;
                        drain_syncq(sq);
                        ASSERT(MUTEX_NOT_HELD(SQLOCK(sq)));
                        /* Check if we need to exit the outer perimeter */
                        /* XXX will this ever be true? */
                        if (!(type & c_outer))
                                outer_exit(sq->sq_outer);
                        return;
                }
        }
        ASSERT(sq->sq_count != 0);
        sq->sq_count--;
        ASSERT((flags & SQ_EXCL) || (type & c_inner));
        sq->sq_flags = flags & ~SQ_EXCL;
        mutex_exit(SQLOCK(sq));

        /* Check if we need to exit the outer perimeter */
        if (!(sq->sq_type & c_outer))
                outer_exit(sq->sq_outer);
}

/*
 * Prevent q_next from changing in this stream by incrementing sq_count.
 *
 * No need to grab sq_putlocks here. See comment in strsubr.h that explains when
 * sq_putlocks are used.
 */
void
claimq(queue_t *qp)
{
        syncq_t *sq = qp->q_syncq;

        mutex_enter(SQLOCK(sq));
        sq->sq_count++;
        ASSERT(sq->sq_count != 0);      /* Wraparound */
        mutex_exit(SQLOCK(sq));
}

/*
 * Undo claimq.
 *
 * No need to grab sq_putlocks here. See comment in strsubr.h that explains when
 * sq_putlocks are used.
 */
void
releaseq(queue_t *qp)
{
        syncq_t *sq = qp->q_syncq;
        uint16_t flags;

        mutex_enter(SQLOCK(sq));
        ASSERT(sq->sq_count > 0);
        sq->sq_count--;

        flags = sq->sq_flags;
        if (flags & (SQ_WANTWAKEUP|SQ_QUEUED)) {
                if (flags & SQ_WANTWAKEUP) {
                        flags &= ~SQ_WANTWAKEUP;
                        cv_broadcast(&sq->sq_wait);
                }
                sq->sq_flags = flags;
                if ((flags & SQ_QUEUED) && !(flags & (SQ_STAYAWAY|SQ_EXCL))) {
                        /*
                         * To prevent potential recursive invocation of
                         * drain_syncq we do not call drain_syncq if count is
                         * non-zero.
                         */
                        if (sq->sq_count == 0) {
                                drain_syncq(sq);
                                return;
                        } else
                                sqenable(sq);
                }
        }
        mutex_exit(SQLOCK(sq));
}

/*
 * Prevent q_next from changing in this stream by incrementing sd_refcnt.
 */
void
claimstr(queue_t *qp)
{
        struct stdata *stp = STREAM(qp);

        mutex_enter(&stp->sd_reflock);
        stp->sd_refcnt++;
        ASSERT(stp->sd_refcnt != 0);    /* Wraparound */
        mutex_exit(&stp->sd_reflock);
}

/*
 * Undo claimstr.
 */
void
releasestr(queue_t *qp)
{
        struct stdata *stp = STREAM(qp);

        mutex_enter(&stp->sd_reflock);
        ASSERT(stp->sd_refcnt != 0);
        if (--stp->sd_refcnt == 0)
                cv_broadcast(&stp->sd_refmonitor);
        mutex_exit(&stp->sd_reflock);
}

static syncq_t *
new_syncq(void)
{
        return (kmem_cache_alloc(syncq_cache, KM_SLEEP));
}

static void
free_syncq(syncq_t *sq)
{
        ASSERT(sq->sq_head == NULL);
        ASSERT(sq->sq_outer == NULL);
        ASSERT(sq->sq_callbpend == NULL);
        ASSERT((sq->sq_onext == NULL && sq->sq_oprev == NULL) ||
            (sq->sq_onext == sq && sq->sq_oprev == sq));

        if (sq->sq_ciputctrl != NULL) {
                ASSERT(sq->sq_nciputctrl == n_ciputctrl - 1);
                SUMCHECK_CIPUTCTRL_COUNTS(sq->sq_ciputctrl,
                    sq->sq_nciputctrl, 0);
                ASSERT(ciputctrl_cache != NULL);
                kmem_cache_free(ciputctrl_cache, sq->sq_ciputctrl);
        }

        sq->sq_tail = NULL;
        sq->sq_evhead = NULL;
        sq->sq_evtail = NULL;
        sq->sq_ciputctrl = NULL;
        sq->sq_nciputctrl = 0;
        sq->sq_count = 0;
        sq->sq_rmqcount = 0;
        sq->sq_callbflags = 0;
        sq->sq_cancelid = 0;
        sq->sq_next = NULL;
        sq->sq_needexcl = 0;
        sq->sq_svcflags = 0;
        sq->sq_nqueues = 0;
        sq->sq_pri = 0;
        sq->sq_onext = NULL;
        sq->sq_oprev = NULL;
        sq->sq_flags = 0;
        sq->sq_type = 0;
        sq->sq_servcount = 0;

        kmem_cache_free(syncq_cache, sq);
}

/* Outer perimeter code */

/*
 * The outer syncq uses the fields and flags in the syncq slightly
 * differently from the inner syncqs.
 *      sq_count        Incremented when there are pending or running
 *                      writers at the outer perimeter to prevent the set of
 *                      inner syncqs that belong to the outer perimeter from
 *                      changing.
 *      sq_head/tail    List of deferred qwriter(OUTER) operations.
 *
 *      SQ_BLOCKED      Set to prevent traversing of sq_next,sq_prev while
 *                      inner syncqs are added to or removed from the
 *                      outer perimeter.
 *      SQ_QUEUED       sq_head/tail has messages or events queued.
 *
 *      SQ_WRITER       A thread is currently traversing all the inner syncqs
 *                      setting the SQ_WRITER flag.
 */

/*
 * Get write access at the outer perimeter.
 * Note that read access is done by entersq, putnext, and put by simply
 * incrementing sq_count in the inner syncq.
 *
 * Waits until "flags" is no longer set in the outer to prevent multiple
 * threads from having write access at the same time. SQ_WRITER has to be part
 * of "flags".
 *
 * Increases sq_count on the outer syncq to keep away outer_insert/remove
 * until the outer_exit is finished.
 *
 * outer_enter is vulnerable to starvation since it does not prevent new
 * threads from entering the inner syncqs while it is waiting for sq_count to
 * go to zero.
 */
void
outer_enter(syncq_t *outer, uint16_t flags)
{
        syncq_t *sq;
        int     wait_needed;
        uint16_t        count;

        ASSERT(outer->sq_outer == NULL && outer->sq_onext != NULL &&
            outer->sq_oprev != NULL);
        ASSERT(flags & SQ_WRITER);

retry:
        mutex_enter(SQLOCK(outer));
        while (outer->sq_flags & flags) {
                outer->sq_flags |= SQ_WANTWAKEUP;
                cv_wait(&outer->sq_wait, SQLOCK(outer));
        }

        ASSERT(!(outer->sq_flags & SQ_WRITER));
        outer->sq_flags |= SQ_WRITER;
        outer->sq_count++;
        ASSERT(outer->sq_count != 0);   /* wraparound */
        wait_needed = 0;
        /*
         * Set SQ_WRITER on all the inner syncqs while holding
         * the SQLOCK on the outer syncq. This ensures that the changing
         * of SQ_WRITER is atomic under the outer SQLOCK.
         */
        for (sq = outer->sq_onext; sq != outer; sq = sq->sq_onext) {
                mutex_enter(SQLOCK(sq));
                count = sq->sq_count;
                SQ_PUTLOCKS_ENTER(sq);
                sq->sq_flags |= SQ_WRITER;
                SUM_SQ_PUTCOUNTS(sq, count);
                if (count != 0)
                        wait_needed = 1;
                SQ_PUTLOCKS_EXIT(sq);
                mutex_exit(SQLOCK(sq));
        }
        mutex_exit(SQLOCK(outer));

        /*
         * Get everybody out of the syncqs sequentially.
         * Note that we don't actually need to acquire the PUTLOCKS, since
         * we have already cleared the fastbit, and set QWRITER.  By
         * definition, the count can not increase since putnext will
         * take the slowlock path (and the purpose of acquiring the
         * putlocks was to make sure it didn't increase while we were
         * waiting).
         *
         * Note that we still acquire the PUTLOCKS to be safe.
         */
        if (wait_needed) {
                for (sq = outer->sq_onext; sq != outer; sq = sq->sq_onext) {
                        mutex_enter(SQLOCK(sq));
                        count = sq->sq_count;
                        SQ_PUTLOCKS_ENTER(sq);
                        SUM_SQ_PUTCOUNTS(sq, count);
                        while (count != 0) {
                                sq->sq_flags |= SQ_WANTWAKEUP;
                                SQ_PUTLOCKS_EXIT(sq);
                                cv_wait(&sq->sq_wait, SQLOCK(sq));
                                count = sq->sq_count;
                                SQ_PUTLOCKS_ENTER(sq);
                                SUM_SQ_PUTCOUNTS(sq, count);
                        }
                        SQ_PUTLOCKS_EXIT(sq);
                        mutex_exit(SQLOCK(sq));
                }
                /*
                 * Verify that none of the flags got set while we
                 * were waiting for the sq_counts to drop.
                 * If this happens we exit and retry entering the
                 * outer perimeter.
                 */
                mutex_enter(SQLOCK(outer));
                if (outer->sq_flags & (flags & ~SQ_WRITER)) {
                        mutex_exit(SQLOCK(outer));
                        outer_exit(outer);
                        goto retry;
                }
                mutex_exit(SQLOCK(outer));
        }
}

/*
 * Drop the write access at the outer perimeter.
 * Read access is dropped implicitly (by putnext, put, and leavesq) by
 * decrementing sq_count.
 */
void
outer_exit(syncq_t *outer)
{
        syncq_t *sq;
        int      drain_needed;
        uint16_t flags;

        ASSERT(outer->sq_outer == NULL && outer->sq_onext != NULL &&
            outer->sq_oprev != NULL);
        ASSERT(MUTEX_NOT_HELD(SQLOCK(outer)));

        /*
         * Atomically (from the perspective of threads calling become_writer)
         * drop the write access at the outer perimeter by holding
         * SQLOCK(outer) across all the dropsq calls and the resetting of
         * SQ_WRITER.
         * This defines a locking order between the outer perimeter
         * SQLOCK and the inner perimeter SQLOCKs.
         */
        mutex_enter(SQLOCK(outer));
        flags = outer->sq_flags;
        ASSERT(outer->sq_flags & SQ_WRITER);
        if (flags & SQ_QUEUED) {
                write_now(outer);
                flags = outer->sq_flags;
        }

        /*
         * sq_onext is stable since sq_count has not yet been decreased.
         * Reset the SQ_WRITER flags in all syncqs.
         * After dropping SQ_WRITER on the outer syncq we empty all the
         * inner syncqs.
         */
        drain_needed = 0;
        for (sq = outer->sq_onext; sq != outer; sq = sq->sq_onext)
                drain_needed += dropsq(sq, SQ_WRITER);
        ASSERT(!(outer->sq_flags & SQ_QUEUED));
        flags &= ~SQ_WRITER;
        if (drain_needed) {
                outer->sq_flags = flags;
                mutex_exit(SQLOCK(outer));
                for (sq = outer->sq_onext; sq != outer; sq = sq->sq_onext)
                        emptysq(sq);
                mutex_enter(SQLOCK(outer));
                flags = outer->sq_flags;
        }
        if (flags & SQ_WANTWAKEUP) {
                flags &= ~SQ_WANTWAKEUP;
                cv_broadcast(&outer->sq_wait);
        }
        outer->sq_flags = flags;
        ASSERT(outer->sq_count > 0);
        outer->sq_count--;
        mutex_exit(SQLOCK(outer));
}

/*
 * Add another syncq to an outer perimeter.
 * Block out all other access to the outer perimeter while it is being
 * changed using blocksq.
 * Assumes that the caller has *not* done an outer_enter.
 *
 * Vulnerable to starvation in blocksq.
 */
static void
outer_insert(syncq_t *outer, syncq_t *sq)
{
        ASSERT(outer->sq_outer == NULL && outer->sq_onext != NULL &&
            outer->sq_oprev != NULL);
        ASSERT(sq->sq_outer == NULL && sq->sq_onext == NULL &&
            sq->sq_oprev == NULL);      /* Can't be in an outer perimeter */

        /* Get exclusive access to the outer perimeter list */
        blocksq(outer, SQ_BLOCKED, 0);
        ASSERT(outer->sq_flags & SQ_BLOCKED);
        ASSERT(!(outer->sq_flags & SQ_WRITER));

        mutex_enter(SQLOCK(sq));
        sq->sq_outer = outer;
        outer->sq_onext->sq_oprev = sq;
        sq->sq_onext = outer->sq_onext;
        outer->sq_onext = sq;
        sq->sq_oprev = outer;
        mutex_exit(SQLOCK(sq));
        unblocksq(outer, SQ_BLOCKED, 1);
}

/*
 * Remove a syncq from an outer perimeter.
 * Block out all other access to the outer perimeter while it is being
 * changed using blocksq.
 * Assumes that the caller has *not* done an outer_enter.
 *
 * Vulnerable to starvation in blocksq.
 */
static void
outer_remove(syncq_t *outer, syncq_t *sq)
{
        ASSERT(outer->sq_outer == NULL && outer->sq_onext != NULL &&
            outer->sq_oprev != NULL);
        ASSERT(sq->sq_outer == outer);

        /* Get exclusive access to the outer perimeter list */
        blocksq(outer, SQ_BLOCKED, 0);
        ASSERT(outer->sq_flags & SQ_BLOCKED);
        ASSERT(!(outer->sq_flags & SQ_WRITER));

        mutex_enter(SQLOCK(sq));
        sq->sq_outer = NULL;
        sq->sq_onext->sq_oprev = sq->sq_oprev;
        sq->sq_oprev->sq_onext = sq->sq_onext;
        sq->sq_oprev = sq->sq_onext = NULL;
        mutex_exit(SQLOCK(sq));
        unblocksq(outer, SQ_BLOCKED, 1);
}

/*
 * Queue a deferred qwriter(OUTER) callback for this outer perimeter.
 * If this is the first callback for this outer perimeter then add
 * this outer perimeter to the list of outer perimeters that
 * the qwriter_outer_thread will process.
 *
 * Increments sq_count in the outer syncq to prevent the membership
 * of the outer perimeter (in terms of inner syncqs) to change while
 * the callback is pending.
 */
static void
queue_writer(syncq_t *outer, void (*func)(), queue_t *q, mblk_t *mp)
{
        ASSERT(MUTEX_HELD(SQLOCK(outer)));

        mp->b_prev = (mblk_t *)func;
        mp->b_queue = q;
        mp->b_next = NULL;
        outer->sq_count++;      /* Decremented when dequeued */
        ASSERT(outer->sq_count != 0);   /* Wraparound */
        if (outer->sq_evhead == NULL) {
                /* First message. */
                outer->sq_evhead = outer->sq_evtail = mp;
                outer->sq_flags |= SQ_EVENTS;
                mutex_exit(SQLOCK(outer));
                STRSTAT(qwr_outer);
                (void) taskq_dispatch(streams_taskq,
                    (task_func_t *)qwriter_outer_service, outer, TQ_SLEEP);
        } else {
                ASSERT(outer->sq_flags & SQ_EVENTS);
                outer->sq_evtail->b_next = mp;
                outer->sq_evtail = mp;
                mutex_exit(SQLOCK(outer));
        }
}

/*
 * Try and upgrade to write access at the outer perimeter. If this can
 * not be done without blocking then queue the callback to be done
 * by the qwriter_outer_thread.
 *
 * This routine can only be called from put or service procedures plus
 * asynchronous callback routines that have properly entered the queue (with
 * entersq). Thus qwriter(OUTER) assumes the caller has one claim on the syncq
 * associated with q.
 */
void
qwriter_outer(queue_t *q, mblk_t *mp, void (*func)())
{
        syncq_t *osq, *sq, *outer;
        int     failed;
        uint16_t flags;

        osq = q->q_syncq;
        outer = osq->sq_outer;
        if (outer == NULL)
                panic("qwriter(PERIM_OUTER): no outer perimeter");
        ASSERT(outer->sq_outer == NULL && outer->sq_onext != NULL &&
            outer->sq_oprev != NULL);

        mutex_enter(SQLOCK(outer));
        flags = outer->sq_flags;
        /*
         * If some thread is traversing sq_next, or if we are blocked by
         * outer_insert or outer_remove, or if the we already have queued
         * callbacks, then queue this callback for later processing.
         *
         * Also queue the qwriter for an interrupt thread in order
         * to reduce the time spent running at high IPL.
         * to identify there are events.
         */
        if ((flags & SQ_GOAWAY) || (curthread->t_pri >= kpreemptpri)) {
                /*
                 * Queue the become_writer request.
                 * The queueing is atomic under SQLOCK(outer) in order
                 * to synchronize with outer_exit.
                 * queue_writer will drop the outer SQLOCK
                 */
                if (flags & SQ_BLOCKED) {
                        /* Must set SQ_WRITER on inner perimeter */
                        mutex_enter(SQLOCK(osq));
                        osq->sq_flags |= SQ_WRITER;
                        mutex_exit(SQLOCK(osq));
                } else {
                        if (!(flags & SQ_WRITER)) {
                                /*
                                 * The outer could have been SQ_BLOCKED thus
                                 * SQ_WRITER might not be set on the inner.
                                 */
                                mutex_enter(SQLOCK(osq));
                                osq->sq_flags |= SQ_WRITER;
                                mutex_exit(SQLOCK(osq));
                        }
                        ASSERT(osq->sq_flags & SQ_WRITER);
                }
                queue_writer(outer, func, q, mp);
                return;
        }
        /*
         * We are half-way to exclusive access to the outer perimeter.
         * Prevent any outer_enter, qwriter(OUTER), or outer_insert/remove
         * while the inner syncqs are traversed.
         */
        outer->sq_count++;
        ASSERT(outer->sq_count != 0);   /* wraparound */
        flags |= SQ_WRITER;
        /*
         * Check if we can run the function immediately. Mark all
         * syncqs with the writer flag to prevent new entries into
         * put and service procedures.
         *
         * Set SQ_WRITER on all the inner syncqs while holding
         * the SQLOCK on the outer syncq. This ensures that the changing
         * of SQ_WRITER is atomic under the outer SQLOCK.
         */
        failed = 0;
        for (sq = outer->sq_onext; sq != outer; sq = sq->sq_onext) {
                uint16_t count;
                uint_t  maxcnt = (sq == osq) ? 1 : 0;

                mutex_enter(SQLOCK(sq));
                count = sq->sq_count;
                SQ_PUTLOCKS_ENTER(sq);
                SUM_SQ_PUTCOUNTS(sq, count);
                if (sq->sq_count > maxcnt)
                        failed = 1;
                sq->sq_flags |= SQ_WRITER;
                SQ_PUTLOCKS_EXIT(sq);
                mutex_exit(SQLOCK(sq));
        }
        if (failed) {
                /*
                 * Some other thread has a read claim on the outer perimeter.
                 * Queue the callback for deferred processing.
                 *
                 * queue_writer will set SQ_QUEUED before we drop SQ_WRITER
                 * so that other qwriter(OUTER) calls will queue their
                 * callbacks as well. queue_writer increments sq_count so we
                 * decrement to compensate for the our increment.
                 *
                 * Dropping SQ_WRITER enables the writer thread to work
                 * on this outer perimeter.
                 */
                outer->sq_flags = flags;
                queue_writer(outer, func, q, mp);
                /* queue_writer dropper the lock */
                mutex_enter(SQLOCK(outer));
                ASSERT(outer->sq_count > 0);
                outer->sq_count--;
                ASSERT(outer->sq_flags & SQ_WRITER);
                flags = outer->sq_flags;
                flags &= ~SQ_WRITER;
                if (flags & SQ_WANTWAKEUP) {
                        flags &= ~SQ_WANTWAKEUP;
                        cv_broadcast(&outer->sq_wait);
                }
                outer->sq_flags = flags;
                mutex_exit(SQLOCK(outer));
                return;
        } else {
                outer->sq_flags = flags;
                mutex_exit(SQLOCK(outer));
        }

        /* Can run it immediately */
        (*func)(q, mp);

        outer_exit(outer);
}

/*
 * Dequeue all writer callbacks from the outer perimeter and run them.
 */
static void
write_now(syncq_t *outer)
{
        mblk_t          *mp;
        queue_t         *q;
        void    (*func)();

        ASSERT(MUTEX_HELD(SQLOCK(outer)));
        ASSERT(outer->sq_outer == NULL && outer->sq_onext != NULL &&
            outer->sq_oprev != NULL);
        while ((mp = outer->sq_evhead) != NULL) {
                /*
                 * queues cannot be placed on the queuelist on the outer
                 * perimeter.
                 */
                ASSERT(!(outer->sq_flags & SQ_MESSAGES));
                ASSERT((outer->sq_flags & SQ_EVENTS));

                outer->sq_evhead = mp->b_next;
                if (outer->sq_evhead == NULL) {
                        outer->sq_evtail = NULL;
                        outer->sq_flags &= ~SQ_EVENTS;
                }
                ASSERT(outer->sq_count != 0);
                outer->sq_count--;      /* Incremented when enqueued. */
                mutex_exit(SQLOCK(outer));
                /*
                 * Drop the message if the queue is closing.
                 * Make sure that the queue is "claimed" when the callback
                 * is run in order to satisfy various ASSERTs.
                 */
                q = mp->b_queue;
                func = (void (*)())mp->b_prev;
                ASSERT(func != NULL);
                mp->b_next = mp->b_prev = NULL;
                if (q->q_flag & QWCLOSE) {
                        freemsg(mp);
                } else {
                        claimq(q);
                        (*func)(q, mp);
                        releaseq(q);
                }
                mutex_enter(SQLOCK(outer));
        }
        ASSERT(MUTEX_HELD(SQLOCK(outer)));
}

/*
 * The list of messages on the inner syncq is effectively hashed
 * by destination queue.  These destination queues are doubly
 * linked lists (hopefully) in priority order.  Messages are then
 * put on the queue referenced by the q_sqhead/q_sqtail elements.
 * Additional messages are linked together by the b_next/b_prev
 * elements in the mblk, with (similar to putq()) the first message
 * having a NULL b_prev and the last message having a NULL b_next.
 *
 * Events, such as qwriter callbacks, are put onto a list in FIFO
 * order referenced by sq_evhead, and sq_evtail.  This is a singly
 * linked list, and messages here MUST be processed in the order queued.
 */

/*
 * Run the events on the syncq event list (sq_evhead).
 * Assumes there is only one claim on the syncq, it is
 * already exclusive (SQ_EXCL set), and the SQLOCK held.
 * Messages here are processed in order, with the SQ_EXCL bit
 * held all the way through till the last message is processed.
 */
void
sq_run_events(syncq_t *sq)
{
        mblk_t          *bp;
        queue_t         *qp;
        uint16_t        flags = sq->sq_flags;
        void            (*func)();

        ASSERT(MUTEX_HELD(SQLOCK(sq)));
        ASSERT((sq->sq_outer == NULL && sq->sq_onext == NULL &&
            sq->sq_oprev == NULL) ||
            (sq->sq_outer != NULL && sq->sq_onext != NULL &&
            sq->sq_oprev != NULL));

        ASSERT(flags & SQ_EXCL);
        ASSERT(sq->sq_count == 1);

        /*
         * We need to process all of the events on this list.  It
         * is possible that new events will be added while we are
         * away processing a callback, so on every loop, we start
         * back at the beginning of the list.
         */
        /*
         * We have to reaccess sq_evhead since there is a
         * possibility of a new entry while we were running
         * the callback.
         */
        for (bp = sq->sq_evhead; bp != NULL; bp = sq->sq_evhead) {
                ASSERT(bp->b_queue->q_syncq == sq);
                ASSERT(sq->sq_flags & SQ_EVENTS);

                qp = bp->b_queue;
                func = (void (*)())bp->b_prev;
                ASSERT(func != NULL);

                /*
                 * Messages from the event queue must be taken off in
                 * FIFO order.
                 */
                ASSERT(sq->sq_evhead == bp);
                sq->sq_evhead = bp->b_next;

                if (bp->b_next == NULL) {
                        /* Deleting last */
                        ASSERT(sq->sq_evtail == bp);
                        sq->sq_evtail = NULL;
                        sq->sq_flags &= ~SQ_EVENTS;
                }
                bp->b_prev = bp->b_next = NULL;
                ASSERT(bp->b_datap->db_ref != 0);

                mutex_exit(SQLOCK(sq));

                (*func)(qp, bp);

                mutex_enter(SQLOCK(sq));
                /*
                 * re-read the flags, since they could have changed.
                 */
                flags = sq->sq_flags;
                ASSERT(flags & SQ_EXCL);
        }
        ASSERT(sq->sq_evhead == NULL && sq->sq_evtail == NULL);
        ASSERT(!(sq->sq_flags & SQ_EVENTS));

        if (flags & SQ_WANTWAKEUP) {
                flags &= ~SQ_WANTWAKEUP;
                cv_broadcast(&sq->sq_wait);
        }
        if (flags & SQ_WANTEXWAKEUP) {
                flags &= ~SQ_WANTEXWAKEUP;
                cv_broadcast(&sq->sq_exitwait);
        }
        sq->sq_flags = flags;
}

/*
 * Put messages on the event list.
 * If we can go exclusive now, do so and process the event list, otherwise
 * let the last claim service this list (or wake the sqthread).
 * This procedure assumes SQLOCK is held.  To run the event list, it
 * must be called with no claims.
 */
static void
sqfill_events(syncq_t *sq, queue_t *q, mblk_t *mp, void (*func)())
{
        uint16_t count;

        ASSERT(MUTEX_HELD(SQLOCK(sq)));
        ASSERT(func != NULL);

        /*
         * This is a callback.  Add it to the list of callbacks
         * and see about upgrading.
         */
        mp->b_prev = (mblk_t *)func;
        mp->b_queue = q;
        mp->b_next = NULL;
        if (sq->sq_evhead == NULL) {
                sq->sq_evhead = sq->sq_evtail = mp;
                sq->sq_flags |= SQ_EVENTS;
        } else {
                ASSERT(sq->sq_evtail != NULL);
                ASSERT(sq->sq_evtail->b_next == NULL);
                ASSERT(sq->sq_flags & SQ_EVENTS);
                sq->sq_evtail->b_next = mp;
                sq->sq_evtail = mp;
        }
        /*
         * We have set SQ_EVENTS, so threads will have to
         * unwind out of the perimeter, and new entries will
         * not grab a putlock.  But we still need to know
         * how many threads have already made a claim to the
         * syncq, so grab the putlocks, and sum the counts.
         * If there are no claims on the syncq, we can upgrade
         * to exclusive, and run the event list.
         * NOTE: We hold the SQLOCK, so we can just grab the
         * putlocks.
         */
        count = sq->sq_count;
        SQ_PUTLOCKS_ENTER(sq);
        SUM_SQ_PUTCOUNTS(sq, count);
        /*
         * We have no claim, so we need to check if there
         * are no others, then we can upgrade.
         */
        /*
         * There are currently no claims on
         * the syncq by this thread (at least on this entry). The thread who has
         * the claim should drain syncq.
         */
        if (count > 0) {
                /*
                 * Can't upgrade - other threads inside.
                 */
                SQ_PUTLOCKS_EXIT(sq);
                mutex_exit(SQLOCK(sq));
                return;
        }
        /*
         * Need to set SQ_EXCL and make a claim on the syncq.
         */
        ASSERT((sq->sq_flags & SQ_EXCL) == 0);
        sq->sq_flags |= SQ_EXCL;
        ASSERT(sq->sq_count == 0);
        sq->sq_count++;
        SQ_PUTLOCKS_EXIT(sq);

        /* Process the events list */
        sq_run_events(sq);

        /*
         * Release our claim...
         */
        sq->sq_count--;

        /*
         * And release SQ_EXCL.
         * We don't need to acquire the putlocks to release
         * SQ_EXCL, since we are exclusive, and hold the SQLOCK.
         */
        sq->sq_flags &= ~SQ_EXCL;

        /*
         * sq_run_events should have released SQ_EXCL
         */
        ASSERT(!(sq->sq_flags & SQ_EXCL));

        /*
         * If anything happened while we were running the
         * events (or was there before), we need to process
         * them now.  We shouldn't be exclusive sine we
         * released the perimeter above (plus, we asserted
         * for it).
         */
        if (!(sq->sq_flags & SQ_STAYAWAY) && (sq->sq_flags & SQ_QUEUED))
                drain_syncq(sq);
        else
                mutex_exit(SQLOCK(sq));
}

/*
 * Perform delayed processing. The caller has to make sure that it is safe
 * to enter the syncq (e.g. by checking that none of the SQ_STAYAWAY bits are
 * set).
 *
 * Assume that the caller has NO claims on the syncq.  However, a claim
 * on the syncq does not indicate that a thread is draining the syncq.
 * There may be more claims on the syncq than there are threads draining
 * (i.e.  #_threads_draining <= sq_count)
 *
 * drain_syncq has to terminate when one of the SQ_STAYAWAY bits gets set
 * in order to preserve qwriter(OUTER) ordering constraints.
 *
 * sq_putcount only needs to be checked when dispatching the queued
 * writer call for CIPUT sync queue, but this is handled in sq_run_events.
 */
void
drain_syncq(syncq_t *sq)
{
        queue_t         *qp;
        uint16_t        count;
        uint16_t        type = sq->sq_type;
        uint16_t        flags = sq->sq_flags;
        boolean_t       bg_service = sq->sq_svcflags & SQ_SERVICE;

        TRACE_1(TR_FAC_STREAMS_FR, TR_DRAIN_SYNCQ_START,
            "drain_syncq start:%p", sq);
        ASSERT(MUTEX_HELD(SQLOCK(sq)));
        ASSERT((sq->sq_outer == NULL && sq->sq_onext == NULL &&
            sq->sq_oprev == NULL) ||
            (sq->sq_outer != NULL && sq->sq_onext != NULL &&
            sq->sq_oprev != NULL));

        /*
         * Drop SQ_SERVICE flag.
         */
        if (bg_service)
                sq->sq_svcflags &= ~SQ_SERVICE;

        /*
         * If SQ_EXCL is set, someone else is processing this syncq - let them
         * finish the job.
         */
        if (flags & SQ_EXCL) {
                if (bg_service) {
                        ASSERT(sq->sq_servcount != 0);
                        sq->sq_servcount--;
                }
                mutex_exit(SQLOCK(sq));
                return;
        }

        /*
         * This routine can be called by a background thread if
         * it was scheduled by a hi-priority thread.  SO, if there are
         * NOT messages queued, return (remember, we have the SQLOCK,
         * and it cannot change until we release it). Wakeup any waiters also.
         */
        if (!(flags & SQ_QUEUED)) {
                if (flags & SQ_WANTWAKEUP) {
                        flags &= ~SQ_WANTWAKEUP;
                        cv_broadcast(&sq->sq_wait);
                }
                if (flags & SQ_WANTEXWAKEUP) {
                        flags &= ~SQ_WANTEXWAKEUP;
                        cv_broadcast(&sq->sq_exitwait);
                }
                sq->sq_flags = flags;
                if (bg_service) {
                        ASSERT(sq->sq_servcount != 0);
                        sq->sq_servcount--;
                }
                mutex_exit(SQLOCK(sq));
                return;
        }

        /*
         * If this is not a concurrent put perimeter, we need to
         * become exclusive to drain.  Also, if not CIPUT, we would
         * not have acquired a putlock, so we don't need to check
         * the putcounts.  If not entering with a claim, we test
         * for sq_count == 0.
         */
        type = sq->sq_type;
        if (!(type & SQ_CIPUT)) {
                if (sq->sq_count > 1) {
                        if (bg_service) {
                                ASSERT(sq->sq_servcount != 0);
                                sq->sq_servcount--;
                        }
                        mutex_exit(SQLOCK(sq));
                        return;
                }
                sq->sq_flags |= SQ_EXCL;
        }

        /*
         * This is where we make a claim to the syncq.
         * This can either be done by incrementing a putlock, or
         * the sq_count.  But since we already have the SQLOCK
         * here, we just bump the sq_count.
         *
         * Note that after we make a claim, we need to let the code
         * fall through to the end of this routine to clean itself
         * up.  A return in the while loop will put the syncq in a
         * very bad state.
         */
        sq->sq_count++;
        ASSERT(sq->sq_count != 0);      /* wraparound */

        while ((flags = sq->sq_flags) & SQ_QUEUED) {
                /*
                 * If we are told to stayaway or went exclusive,
                 * we are done.
                 */
                if (flags & (SQ_STAYAWAY)) {
                        break;
                }

                /*
                 * If there are events to run, do so.
                 * We have one claim to the syncq, so if there are
                 * more than one, other threads are running.
                 */
                if (sq->sq_evhead != NULL) {
                        ASSERT(sq->sq_flags & SQ_EVENTS);

                        count = sq->sq_count;
                        SQ_PUTLOCKS_ENTER(sq);
                        SUM_SQ_PUTCOUNTS(sq, count);
                        if (count > 1) {
                                SQ_PUTLOCKS_EXIT(sq);
                                /* Can't upgrade - other threads inside */
                                break;
                        }
                        ASSERT((flags & SQ_EXCL) == 0);
                        sq->sq_flags = flags | SQ_EXCL;
                        SQ_PUTLOCKS_EXIT(sq);
                        /*
                         * we have the only claim, run the events,
                         * sq_run_events will clear the SQ_EXCL flag.
                         */
                        sq_run_events(sq);

                        /*
                         * If this is a CIPUT perimeter, we need
                         * to drop the SQ_EXCL flag so we can properly
                         * continue draining the syncq.
                         */
                        if (type & SQ_CIPUT) {
                                ASSERT(sq->sq_flags & SQ_EXCL);
                                sq->sq_flags &= ~SQ_EXCL;
                        }

                        /*
                         * And go back to the beginning just in case
                         * anything changed while we were away.
                         */
                        ASSERT((sq->sq_flags & SQ_EXCL) || (type & SQ_CIPUT));
                        continue;
                }

                ASSERT(sq->sq_evhead == NULL);
                ASSERT(!(sq->sq_flags & SQ_EVENTS));

                /*
                 * Find the queue that is not draining.
                 *
                 * q_draining is protected by QLOCK which we do not hold.
                 * But if it was set, then a thread was draining, and if it gets
                 * cleared, then it was because the thread has successfully
                 * drained the syncq, or a GOAWAY state occurred. For the GOAWAY
                 * state to happen, a thread needs the SQLOCK which we hold, and
                 * if there was such a flag, we would have already seen it.
                 */

                for (qp = sq->sq_head;
                    qp != NULL && (qp->q_draining ||
                    (qp->q_sqflags & Q_SQDRAINING));
                    qp = qp->q_sqnext)
                        ;

                if (qp == NULL)
                        break;

                /*
                 * We have a queue to work on, and we hold the
                 * SQLOCK and one claim, call qdrain_syncq.
                 * This means we need to release the SQLOCK and
                 * acquire the QLOCK (OK since we have a claim).
                 * Note that qdrain_syncq will actually dequeue
                 * this queue from the sq_head list when it is
                 * convinced all the work is done and release
                 * the QLOCK before returning.
                 */
                qp->q_sqflags |= Q_SQDRAINING;
                mutex_exit(SQLOCK(sq));
                mutex_enter(QLOCK(qp));
                qdrain_syncq(sq, qp);
                mutex_enter(SQLOCK(sq));

                /* The queue is drained */
                ASSERT(qp->q_sqflags & Q_SQDRAINING);
                qp->q_sqflags &= ~Q_SQDRAINING;
                /*
                 * NOTE: After this point qp should not be used since it may be
                 * closed.
                 */
        }

        ASSERT(MUTEX_HELD(SQLOCK(sq)));
        flags = sq->sq_flags;

        /*
         * sq->sq_head cannot change because we hold the
         * sqlock. However, a thread CAN decide that it is no longer
         * going to drain that queue.  However, this should be due to
         * a GOAWAY state, and we should see that here.
         *
         * This loop is not very efficient. One solution may be adding a second
         * pointer to the "draining" queue, but it is difficult to do when
         * queues are inserted in the middle due to priority ordering. Another
         * possibility is to yank the queue out of the sq list and put it onto
         * the "draining list" and then put it back if it can't be drained.
         */

        ASSERT((sq->sq_head == NULL) || (flags & SQ_GOAWAY) ||
            (type & SQ_CI) || sq->sq_head->q_draining);

        /* Drop SQ_EXCL for non-CIPUT perimeters */
        if (!(type & SQ_CIPUT))
                flags &= ~SQ_EXCL;
        ASSERT((flags & SQ_EXCL) == 0);

        /* Wake up any waiters. */
        if (flags & SQ_WANTWAKEUP) {
                flags &= ~SQ_WANTWAKEUP;
                cv_broadcast(&sq->sq_wait);
        }
        if (flags & SQ_WANTEXWAKEUP) {
                flags &= ~SQ_WANTEXWAKEUP;
                cv_broadcast(&sq->sq_exitwait);
        }
        sq->sq_flags = flags;

        ASSERT(sq->sq_count != 0);
        /* Release our claim. */
        sq->sq_count--;

        if (bg_service) {
                ASSERT(sq->sq_servcount != 0);
                sq->sq_servcount--;
        }

        mutex_exit(SQLOCK(sq));

        TRACE_1(TR_FAC_STREAMS_FR, TR_DRAIN_SYNCQ_END,
            "drain_syncq end:%p", sq);
}


/*
 *
 * qdrain_syncq can be called (currently) from only one of two places:
 *      drain_syncq
 *      putnext  (or some variation of it).
 * and eventually
 *      qwait(_sig)
 *
 * If called from drain_syncq, we found it in the list of queues needing
 * service, so there is work to be done (or it wouldn't be in the list).
 *
 * If called from some putnext variation, it was because the
 * perimeter is open, but messages are blocking a putnext and
 * there is not a thread working on it.  Now a thread could start
 * working on it while we are getting ready to do so ourself, but
 * the thread would set the q_draining flag, and we can spin out.
 *
 * As for qwait(_sig), I think I shall let it continue to call
 * drain_syncq directly (after all, it will get here eventually).
 *
 * qdrain_syncq has to terminate when:
 * - one of the SQ_STAYAWAY bits gets set to preserve qwriter(OUTER) ordering
 * - SQ_EVENTS gets set to preserve qwriter(INNER) ordering
 *
 * ASSUMES:
 *      One claim
 *      QLOCK held
 *      SQLOCK not held
 *      Will release QLOCK before returning
 */
void
qdrain_syncq(syncq_t *sq, queue_t *q)
{
        mblk_t          *bp;
#ifdef DEBUG
        uint16_t        count;
#endif

        TRACE_1(TR_FAC_STREAMS_FR, TR_DRAIN_SYNCQ_START,
            "drain_syncq start:%p", sq);
        ASSERT(q->q_syncq == sq);
        ASSERT(MUTEX_HELD(QLOCK(q)));
        ASSERT(MUTEX_NOT_HELD(SQLOCK(sq)));
        /*
         * For non-CIPUT perimeters, we should be called with the exclusive bit
         * set already. For CIPUT perimeters, we will be doing a concurrent
         * drain, so it better not be set.
         */
        ASSERT((sq->sq_flags & (SQ_EXCL|SQ_CIPUT)));
        ASSERT(!((sq->sq_type & SQ_CIPUT) && (sq->sq_flags & SQ_EXCL)));
        ASSERT((sq->sq_type & SQ_CIPUT) || (sq->sq_flags & SQ_EXCL));
        /*
         * All outer pointers are set, or none of them are
         */
        ASSERT((sq->sq_outer == NULL && sq->sq_onext == NULL &&
            sq->sq_oprev == NULL) ||
            (sq->sq_outer != NULL && sq->sq_onext != NULL &&
            sq->sq_oprev != NULL));
#ifdef DEBUG
        count = sq->sq_count;
        /*
         * This is OK without the putlocks, because we have one
         * claim either from the sq_count, or a putcount.  We could
         * get an erroneous value from other counts, but ours won't
         * change, so one way or another, we will have at least a
         * value of one.
         */
        SUM_SQ_PUTCOUNTS(sq, count);
        ASSERT(count >= 1);
#endif /* DEBUG */

        /*
         * The first thing to do is find out if a thread is already draining
         * this queue. If so, we are done, just return.
         */
        if (q->q_draining) {
                mutex_exit(QLOCK(q));
                return;
        }

        /*
         * If the perimeter is exclusive, there is nothing we can do right now,
         * go away. Note that there is nothing to prevent this case from
         * changing right after this check, but the spin-out will catch it.
         */

        /* Tell other threads that we are draining this queue */
        q->q_draining = 1;      /* Protected by QLOCK */

        /*
         * If there is nothing to do, clear QFULL as necessary. This caters for
         * the case where an empty queue was enqueued onto the syncq.
         */
        if (q->q_sqhead == NULL) {
                ASSERT(q->q_syncqmsgs == 0);
                mutex_exit(QLOCK(q));
                clr_qfull(q);
                mutex_enter(QLOCK(q));
        }

        /*
         * Note that q_sqhead must be re-checked here in case another message
         * was enqueued whilst QLOCK was dropped during the call to clr_qfull.
         */
        for (bp = q->q_sqhead; bp != NULL; bp = q->q_sqhead) {
                /*
                 * Because we can enter this routine just because a putnext is
                 * blocked, we need to spin out if the perimeter wants to go
                 * exclusive as well as just blocked. We need to spin out also
                 * if events are queued on the syncq.
                 * Don't check for SQ_EXCL, because non-CIPUT perimeters would
                 * set it, and it can't become exclusive while we hold a claim.
                 */
                if (sq->sq_flags & (SQ_STAYAWAY | SQ_EVENTS)) {
                        break;
                }

#ifdef DEBUG
                /*
                 * Since we are in qdrain_syncq, we already know the queue,
                 * but for sanity, we want to check this against the qp that
                 * was passed in by bp->b_queue.
                 */

                ASSERT(bp->b_queue == q);
                ASSERT(bp->b_queue->q_syncq == sq);
                bp->b_queue = NULL;

                /*
                 * We would have the following check in the DEBUG code:
                 *
                 * if (bp->b_prev != NULL)  {
                 *      ASSERT(bp->b_prev == (void (*)())q->q_qinfo->qi_putp);
                 * }
                 *
                 * This can't be done, however, since IP modifies qinfo
                 * structure at run-time (switching between IPv4 qinfo and IPv6
                 * qinfo), invalidating the check.
                 * So the assignment to func is left here, but the ASSERT itself
                 * is removed until the whole issue is resolved.
                 */
#endif
                ASSERT(q->q_sqhead == bp);
                q->q_sqhead = bp->b_next;
                bp->b_prev = bp->b_next = NULL;
                ASSERT(q->q_syncqmsgs > 0);
                mutex_exit(QLOCK(q));

                ASSERT(bp->b_datap->db_ref != 0);

                (void) (*q->q_qinfo->qi_putp)(q, bp);

                mutex_enter(QLOCK(q));

                /*
                 * q_syncqmsgs should only be decremented after executing the
                 * put procedure to avoid message re-ordering. This is due to an
                 * optimisation in putnext() which can call the put procedure
                 * directly if it sees q_syncqmsgs == 0 (despite Q_SQQUEUED
                 * being set).
                 *
                 * We also need to clear QFULL in the next service procedure
                 * queue if this is the last message destined for that queue.
                 *
                 * It would make better sense to have some sort of tunable for
                 * the low water mark, but these semantics are not yet defined.
                 * So, alas, we use a constant.
                 */
                if (--q->q_syncqmsgs == 0) {
                        mutex_exit(QLOCK(q));
                        clr_qfull(q);
                        mutex_enter(QLOCK(q));
                }

                /*
                 * Always clear SQ_EXCL when CIPUT in order to handle
                 * qwriter(INNER). The putp() can call qwriter and get exclusive
                 * access IFF this is the only claim. So, we need to test for
                 * this possibility, acquire the mutex and clear the bit.
                 */
                if ((sq->sq_type & SQ_CIPUT) && (sq->sq_flags & SQ_EXCL)) {
                        mutex_enter(SQLOCK(sq));
                        sq->sq_flags &= ~SQ_EXCL;
                        mutex_exit(SQLOCK(sq));
                }
        }

        /*
         * We should either have no messages on this queue, or we were told to
         * goaway by a waiter (which we will wake up at the end of this
         * function).
         */
        ASSERT((q->q_sqhead == NULL) ||
            (sq->sq_flags & (SQ_STAYAWAY | SQ_EVENTS)));

        ASSERT(MUTEX_HELD(QLOCK(q)));
        ASSERT(MUTEX_NOT_HELD(SQLOCK(sq)));

        /* Remove the q from the syncq list if all the messages are drained. */
        if (q->q_sqhead == NULL) {
                ASSERT(q->q_syncqmsgs == 0);
                mutex_enter(SQLOCK(sq));
                if (q->q_sqflags & Q_SQQUEUED)
                        SQRM_Q(sq, q);
                mutex_exit(SQLOCK(sq));
                /*
                 * Since the queue is removed from the list, reset its priority.
                 */
                q->q_spri = 0;
        }

        /*
         * Remember, the q_draining flag is used to let another thread know
         * that there is a thread currently draining the messages for a queue.
         * Since we are now done with this queue (even if there may be messages
         * still there), we need to clear this flag so some thread will work on
         * it if needed.
         */
        ASSERT(q->q_draining);
        q->q_draining = 0;

        /* Called with a claim, so OK to drop all locks. */
        mutex_exit(QLOCK(q));

        TRACE_1(TR_FAC_STREAMS_FR, TR_DRAIN_SYNCQ_END,
            "drain_syncq end:%p", sq);
}
/* END OF QDRAIN_SYNCQ  */


/*
 * This is the mate to qdrain_syncq, except that it is putting the message onto
 * the queue instead of draining. Since the message is destined for the queue
 * that is selected, there is no need to identify the function because the
 * message is intended for the put routine for the queue. For debug kernels,
 * this routine will do it anyway just in case.
 *
 * After the message is enqueued on the syncq, it calls putnext_tail()
 * which will schedule a background thread to actually process the message.
 *
 * Assumes that there is a claim on the syncq (sq->sq_count > 0) and
 * SQLOCK(sq) and QLOCK(q) are not held.
 */
void
qfill_syncq(syncq_t *sq, queue_t *q, mblk_t *mp)
{
        ASSERT(MUTEX_NOT_HELD(SQLOCK(sq)));
        ASSERT(MUTEX_NOT_HELD(QLOCK(q)));
        ASSERT(sq->sq_count > 0);
        ASSERT(q->q_syncq == sq);
        ASSERT((sq->sq_outer == NULL && sq->sq_onext == NULL &&
            sq->sq_oprev == NULL) ||
            (sq->sq_outer != NULL && sq->sq_onext != NULL &&
            sq->sq_oprev != NULL));

        mutex_enter(QLOCK(q));

#ifdef DEBUG
        /*
         * This is used for debug in the qfill_syncq/qdrain_syncq case
         * to trace the queue that the message is intended for.  Note
         * that the original use was to identify the queue and function
         * to call on the drain.  In the new syncq, we have the context
         * of the queue that we are draining, so call it's putproc and
         * don't rely on the saved values.  But for debug this is still
         * useful information.
         */
        mp->b_prev = (mblk_t *)q->q_qinfo->qi_putp;
        mp->b_queue = q;
        mp->b_next = NULL;
#endif
        ASSERT(q->q_syncq == sq);
        /*
         * Enqueue the message on the list.
         * SQPUT_MP() accesses q_syncqmsgs.  We are already holding QLOCK to
         * protect it.  So it's ok to acquire SQLOCK after SQPUT_MP().
         */
        SQPUT_MP(q, mp);
        mutex_enter(SQLOCK(sq));

        /*
         * And queue on syncq for scheduling, if not already queued.
         * Note that we need the SQLOCK for this, and for testing flags
         * at the end to see if we will drain.  So grab it now, and
         * release it before we call qdrain_syncq or return.
         */
        if (!(q->q_sqflags & Q_SQQUEUED)) {
                q->q_spri = curthread->t_pri;
                SQPUT_Q(sq, q);
        }
#ifdef DEBUG
        else {
                /*
                 * All of these conditions MUST be true!
                 */
                ASSERT(sq->sq_tail != NULL);
                if (sq->sq_tail == sq->sq_head) {
                        ASSERT((q->q_sqprev == NULL) &&
                            (q->q_sqnext == NULL));
                } else {
                        ASSERT((q->q_sqprev != NULL) ||
                            (q->q_sqnext != NULL));
                }
                ASSERT(sq->sq_flags & SQ_QUEUED);
                ASSERT(q->q_syncqmsgs != 0);
                ASSERT(q->q_sqflags & Q_SQQUEUED);
        }
#endif
        mutex_exit(QLOCK(q));
        /*
         * SQLOCK is still held, so sq_count can be safely decremented.
         */
        sq->sq_count--;

        putnext_tail(sq, q, 0);
        /* Should not reference sq or q after this point. */
}

/*  End of qfill_syncq  */

/*
 * Remove all messages from a syncq (if qp is NULL) or remove all messages
 * that would be put into qp by drain_syncq.
 * Used when deleting the syncq (qp == NULL) or when detaching
 * a queue (qp != NULL).
 * Return non-zero if one or more messages were freed.
 *
 * No need to grab sq_putlocks here. See comment in strsubr.h that explains when
 * sq_putlocks are used.
 *
 * NOTE: This function assumes that it is called from the close() context and
 * that all the queues in the syncq are going away. For this reason it doesn't
 * acquire QLOCK for modifying q_sqhead/q_sqtail fields. This assumption is
 * currently valid, but it is useful to rethink this function to behave properly
 * in other cases.
 */
int
flush_syncq(syncq_t *sq, queue_t *qp)
{
        mblk_t          *bp, *mp_head, *mp_next, *mp_prev;
        queue_t         *q;
        int             ret = 0;

        mutex_enter(SQLOCK(sq));

        /*
         * Before we leave, we need to make sure there are no
         * events listed for this queue.  All events for this queue
         * will just be freed.
         */
        if (qp != NULL && sq->sq_evhead != NULL) {
                ASSERT(sq->sq_flags & SQ_EVENTS);

                mp_prev = NULL;
                for (bp = sq->sq_evhead; bp != NULL; bp = mp_next) {
                        mp_next = bp->b_next;
                        if (bp->b_queue == qp) {
                                /* Delete this message */
                                if (mp_prev != NULL) {
                                        mp_prev->b_next = mp_next;
                                        /*
                                         * Update sq_evtail if the last element
                                         * is removed.
                                         */
                                        if (bp == sq->sq_evtail) {
                                                ASSERT(mp_next == NULL);
                                                sq->sq_evtail = mp_prev;
                                        }
                                } else
                                        sq->sq_evhead = mp_next;
                                if (sq->sq_evhead == NULL)
                                        sq->sq_flags &= ~SQ_EVENTS;
                                bp->b_prev = bp->b_next = NULL;
                                freemsg(bp);
                                ret++;
                        } else {
                                mp_prev = bp;
                        }
                }
        }

        /*
         * Walk sq_head and:
         *      - match qp if qp is set, remove it's messages
         *      - all if qp is not set
         */
        q = sq->sq_head;
        while (q != NULL) {
                ASSERT(q->q_syncq == sq);
                if ((qp == NULL) || (qp == q)) {
                        /*
                         * Yank the messages as a list off the queue
                         */
                        mp_head = q->q_sqhead;
                        /*
                         * We do not have QLOCK(q) here (which is safe due to
                         * assumptions mentioned above). To obtain the lock we
                         * need to release SQLOCK which may allow lots of things
                         * to change upon us. This place requires more analysis.
                         */
                        q->q_sqhead = q->q_sqtail = NULL;
                        ASSERT(mp_head->b_queue &&
                            mp_head->b_queue->q_syncq == sq);

                        /*
                         * Free each of the messages.
                         */
                        for (bp = mp_head; bp != NULL; bp = mp_next) {
                                mp_next = bp->b_next;
                                bp->b_prev = bp->b_next = NULL;
                                freemsg(bp);
                                ret++;
                        }
                        /*
                         * Now remove the queue from the syncq.
                         */
                        ASSERT(q->q_sqflags & Q_SQQUEUED);
                        SQRM_Q(sq, q);
                        q->q_spri = 0;
                        q->q_syncqmsgs = 0;

                        /*
                         * If qp was specified, we are done with it and are
                         * going to drop SQLOCK(sq) and return. We wakeup syncq
                         * waiters while we still have the SQLOCK.
                         */
                        if ((qp != NULL) && (sq->sq_flags & SQ_WANTWAKEUP)) {
                                sq->sq_flags &= ~SQ_WANTWAKEUP;
                                cv_broadcast(&sq->sq_wait);
                        }
                        /* Drop SQLOCK across clr_qfull */
                        mutex_exit(SQLOCK(sq));

                        /*
                         * We avoid doing the test that drain_syncq does and
                         * unconditionally clear qfull for every flushed
                         * message. Since flush_syncq is only called during
                         * close this should not be a problem.
                         */
                        clr_qfull(q);
                        if (qp != NULL) {
                                return (ret);
                        } else {
                                mutex_enter(SQLOCK(sq));
                                /*
                                 * The head was removed by SQRM_Q above.
                                 * reread the new head and flush it.
                                 */
                                q = sq->sq_head;
                        }
                } else {
                        q = q->q_sqnext;
                }
                ASSERT(MUTEX_HELD(SQLOCK(sq)));
        }

        if (sq->sq_flags & SQ_WANTWAKEUP) {
                sq->sq_flags &= ~SQ_WANTWAKEUP;
                cv_broadcast(&sq->sq_wait);
        }

        mutex_exit(SQLOCK(sq));
        return (ret);
}

/*
 * Propagate all messages from a syncq to the next syncq that are associated
 * with the specified queue. If the queue is attached to a driver or if the
 * messages have been added due to a qwriter(PERIM_INNER), free the messages.
 *
 * Assumes that the stream is strlock()'ed. We don't come here if there
 * are no messages to propagate.
 *
 * NOTE : If the queue is attached to a driver, all the messages are freed
 * as there is no point in propagating the messages from the driver syncq
 * to the closing stream head which will in turn get freed later.
 */
static int
propagate_syncq(queue_t *qp)
{
        mblk_t          *bp, *head, *tail, *prev, *next;
        syncq_t         *sq;
        queue_t         *nqp;
        syncq_t         *nsq;
        boolean_t       isdriver;
        int             moved = 0;
        uint16_t        flags;
        pri_t           priority = curthread->t_pri;
#ifdef DEBUG
        void            (*func)();
#endif

        sq = qp->q_syncq;
        ASSERT(MUTEX_HELD(SQLOCK(sq)));
        /* debug macro */
        SQ_PUTLOCKS_HELD(sq);
        /*
         * As entersq() does not increment the sq_count for
         * the write side, check sq_count for non-QPERQ
         * perimeters alone.
         */
        ASSERT((qp->q_flag & QPERQ) || (sq->sq_count >= 1));

        /*
         * propagate_syncq() can be called because of either messages on the
         * queue syncq or because on events on the queue syncq. Do actual
         * message propagations if there are any messages.
         */
        if (qp->q_syncqmsgs) {
                isdriver = (qp->q_flag & QISDRV);

                if (!isdriver) {
                        nqp = qp->q_next;
                        nsq = nqp->q_syncq;
                        ASSERT(MUTEX_HELD(SQLOCK(nsq)));
                        /* debug macro */
                        SQ_PUTLOCKS_HELD(nsq);
#ifdef DEBUG
                        func = (void (*)())nqp->q_qinfo->qi_putp;
#endif
                }

                SQRM_Q(sq, qp);
                priority = MAX(qp->q_spri, priority);
                qp->q_spri = 0;
                head = qp->q_sqhead;
                tail = qp->q_sqtail;
                qp->q_sqhead = qp->q_sqtail = NULL;
                qp->q_syncqmsgs = 0;

                /*
                 * Walk the list of messages, and free them if this is a driver,
                 * otherwise reset the b_prev and b_queue value to the new putp.
                 * Afterward, we will just add the head to the end of the next
                 * syncq, and point the tail to the end of this one.
                 */

                for (bp = head; bp != NULL; bp = next) {
                        next = bp->b_next;
                        if (isdriver) {
                                bp->b_prev = bp->b_next = NULL;
                                freemsg(bp);
                                continue;
                        }
                        /* Change the q values for this message */
                        bp->b_queue = nqp;
#ifdef DEBUG
                        bp->b_prev = (mblk_t *)func;
#endif
                        moved++;
                }
                /*
                 * Attach list of messages to the end of the new queue (if there
                 * is a list of messages).
                 */

                if (!isdriver && head != NULL) {
                        ASSERT(tail != NULL);
                        if (nqp->q_sqhead == NULL) {
                                nqp->q_sqhead = head;
                        } else {
                                ASSERT(nqp->q_sqtail != NULL);
                                nqp->q_sqtail->b_next = head;
                        }
                        nqp->q_sqtail = tail;
                        /*
                         * When messages are moved from high priority queue to
                         * another queue, the destination queue priority is
                         * upgraded.
                         */

                        if (priority > nqp->q_spri)
                                nqp->q_spri = priority;

                        SQPUT_Q(nsq, nqp);

                        nqp->q_syncqmsgs += moved;
                        ASSERT(nqp->q_syncqmsgs != 0);
                }
        }

        /*
         * Before we leave, we need to make sure there are no
         * events listed for this queue.  All events for this queue
         * will just be freed.
         */
        if (sq->sq_evhead != NULL) {
                ASSERT(sq->sq_flags & SQ_EVENTS);
                prev = NULL;
                for (bp = sq->sq_evhead; bp != NULL; bp = next) {
                        next = bp->b_next;
                        if (bp->b_queue == qp) {
                                /* Delete this message */
                                if (prev != NULL) {
                                        prev->b_next = next;
                                        /*
                                         * Update sq_evtail if the last element
                                         * is removed.
                                         */
                                        if (bp == sq->sq_evtail) {
                                                ASSERT(next == NULL);
                                                sq->sq_evtail = prev;
                                        }
                                } else
                                        sq->sq_evhead = next;
                                if (sq->sq_evhead == NULL)
                                        sq->sq_flags &= ~SQ_EVENTS;
                                bp->b_prev = bp->b_next = NULL;
                                freemsg(bp);
                        } else {
                                prev = bp;
                        }
                }
        }

        flags = sq->sq_flags;

        /* Wake up any waiter before leaving. */
        if (flags & SQ_WANTWAKEUP) {
                flags &= ~SQ_WANTWAKEUP;
                cv_broadcast(&sq->sq_wait);
        }
        sq->sq_flags = flags;

        return (moved);
}

/*
 * Try and upgrade to exclusive access at the inner perimeter. If this can
 * not be done without blocking then request will be queued on the syncq
 * and drain_syncq will run it later.
 *
 * This routine can only be called from put or service procedures plus
 * asynchronous callback routines that have properly entered the queue (with
 * entersq). Thus qwriter_inner assumes the caller has one claim on the syncq
 * associated with q.
 */
void
qwriter_inner(queue_t *q, mblk_t *mp, void (*func)())
{
        syncq_t *sq = q->q_syncq;
        uint16_t count;

        mutex_enter(SQLOCK(sq));
        count = sq->sq_count;
        SQ_PUTLOCKS_ENTER(sq);
        SUM_SQ_PUTCOUNTS(sq, count);
        ASSERT(count >= 1);
        ASSERT(sq->sq_type & (SQ_CIPUT|SQ_CISVC));

        if (count == 1) {
                /*
                 * Can upgrade. This case also handles nested qwriter calls
                 * (when the qwriter callback function calls qwriter). In that
                 * case SQ_EXCL is already set.
                 */
                sq->sq_flags |= SQ_EXCL;
                SQ_PUTLOCKS_EXIT(sq);
                mutex_exit(SQLOCK(sq));
                (*func)(q, mp);
                /*
                 * Assumes that leavesq, putnext, and drain_syncq will reset
                 * SQ_EXCL for SQ_CIPUT/SQ_CISVC queues. We leave SQ_EXCL on
                 * until putnext, leavesq, or drain_syncq drops it.
                 * That way we handle nested qwriter(INNER) without dropping
                 * SQ_EXCL until the outermost qwriter callback routine is
                 * done.
                 */
                return;
        }
        SQ_PUTLOCKS_EXIT(sq);
        sqfill_events(sq, q, mp, func);
}

/*
 * Synchronous callback support functions
 */

/*
 * Allocate a callback parameter structure.
 * Assumes that caller initializes the flags and the id.
 * Acquires SQLOCK(sq) if non-NULL is returned.
 */
callbparams_t *
callbparams_alloc(syncq_t *sq, void (*func)(void *), void *arg, int kmflags)
{
        callbparams_t *cbp;
        size_t size = sizeof (callbparams_t);

        cbp = kmem_alloc(size, kmflags & ~KM_PANIC);

        /*
         * Only try tryhard allocation if the caller is ready to panic.
         * Otherwise just fail.
         */
        if (cbp == NULL) {
                if (kmflags & KM_PANIC)
                        cbp = kmem_alloc_tryhard(sizeof (callbparams_t),
                            &size, kmflags);
                else
                        return (NULL);
        }

        ASSERT(size >= sizeof (callbparams_t));
        cbp->cbp_size = size;
        cbp->cbp_sq = sq;
        cbp->cbp_func = func;
        cbp->cbp_arg = arg;
        mutex_enter(SQLOCK(sq));
        cbp->cbp_next = sq->sq_callbpend;
        sq->sq_callbpend = cbp;
        return (cbp);
}

void
callbparams_free(syncq_t *sq, callbparams_t *cbp)
{
        callbparams_t **pp, *p;

        ASSERT(MUTEX_HELD(SQLOCK(sq)));

        for (pp = &sq->sq_callbpend; (p = *pp) != NULL; pp = &p->cbp_next) {
                if (p == cbp) {
                        *pp = p->cbp_next;
                        kmem_free(p, p->cbp_size);
                        return;
                }
        }
        (void) (STRLOG(0, 0, 0, SL_CONSOLE,
            "callbparams_free: not found\n"));
}

void
callbparams_free_id(syncq_t *sq, callbparams_id_t id, int32_t flag)
{
        callbparams_t **pp, *p;

        ASSERT(MUTEX_HELD(SQLOCK(sq)));

        for (pp = &sq->sq_callbpend; (p = *pp) != NULL; pp = &p->cbp_next) {
                if (p->cbp_id == id && p->cbp_flags == flag) {
                        *pp = p->cbp_next;
                        kmem_free(p, p->cbp_size);
                        return;
                }
        }
        (void) (STRLOG(0, 0, 0, SL_CONSOLE,
            "callbparams_free_id: not found\n"));
}

/*
 * Callback wrapper function used by once-only callbacks that can be
 * cancelled (qtimeout and qbufcall)
 * Contains inline version of entersq(sq, SQ_CALLBACK) that can be
 * cancelled by the qun* functions.
 */
void
qcallbwrapper(void *arg)
{
        callbparams_t *cbp = arg;
        syncq_t *sq;
        uint16_t count = 0;
        uint16_t waitflags = SQ_STAYAWAY | SQ_EVENTS | SQ_EXCL;
        uint16_t type;

        sq = cbp->cbp_sq;
        mutex_enter(SQLOCK(sq));
        type = sq->sq_type;
        if (!(type & SQ_CICB)) {
                count = sq->sq_count;
                SQ_PUTLOCKS_ENTER(sq);
                SQ_PUTCOUNT_CLRFAST_LOCKED(sq);
                SUM_SQ_PUTCOUNTS(sq, count);
                sq->sq_needexcl++;
                ASSERT(sq->sq_needexcl != 0);   /* wraparound */
                waitflags |= SQ_MESSAGES;
        }
        /* Can not handle exclusive entry at outer perimeter */
        ASSERT(type & SQ_COCB);

        while ((sq->sq_flags & waitflags) || (!(type & SQ_CICB) &&count != 0)) {
                if ((sq->sq_callbflags & cbp->cbp_flags) &&
                    (sq->sq_cancelid == cbp->cbp_id)) {
                        /* timeout has been cancelled */
                        sq->sq_callbflags |= SQ_CALLB_BYPASSED;
                        callbparams_free(sq, cbp);
                        if (!(type & SQ_CICB)) {
                                ASSERT(sq->sq_needexcl > 0);
                                sq->sq_needexcl--;
                                if (sq->sq_needexcl == 0) {
                                        SQ_PUTCOUNT_SETFAST_LOCKED(sq);
                                }
                                SQ_PUTLOCKS_EXIT(sq);
                        }
                        mutex_exit(SQLOCK(sq));
                        return;
                }
                sq->sq_flags |= SQ_WANTWAKEUP;
                if (!(type & SQ_CICB)) {
                        SQ_PUTLOCKS_EXIT(sq);
                }
                cv_wait(&sq->sq_wait, SQLOCK(sq));
                if (!(type & SQ_CICB)) {
                        count = sq->sq_count;
                        SQ_PUTLOCKS_ENTER(sq);
                        SUM_SQ_PUTCOUNTS(sq, count);
                }
        }

        sq->sq_count++;
        ASSERT(sq->sq_count != 0);      /* Wraparound */
        if (!(type & SQ_CICB)) {
                ASSERT(count == 0);
                sq->sq_flags |= SQ_EXCL;
                ASSERT(sq->sq_needexcl > 0);
                sq->sq_needexcl--;
                if (sq->sq_needexcl == 0) {
                        SQ_PUTCOUNT_SETFAST_LOCKED(sq);
                }
                SQ_PUTLOCKS_EXIT(sq);
        }

        mutex_exit(SQLOCK(sq));

        cbp->cbp_func(cbp->cbp_arg);

        /*
         * We drop the lock only for leavesq to re-acquire it.
         * Possible optimization is inline of leavesq.
         */
        mutex_enter(SQLOCK(sq));
        callbparams_free(sq, cbp);
        mutex_exit(SQLOCK(sq));
        leavesq(sq, SQ_CALLBACK);
}

/*
 * No need to grab sq_putlocks here. See comment in strsubr.h that
 * explains when sq_putlocks are used.
 *
 * sq_count (or one of the sq_putcounts) has already been
 * decremented by the caller, and if SQ_QUEUED, we need to call
 * drain_syncq (the global syncq drain).
 * If putnext_tail is called with the SQ_EXCL bit set, we are in
 * one of two states, non-CIPUT perimeter, and we need to clear
 * it, or we went exclusive in the put procedure.  In any case,
 * we want to clear the bit now, and it is probably easier to do
 * this at the beginning of this function (remember, we hold
 * the SQLOCK).  Lastly, if there are other messages queued
 * on the syncq (and not for our destination), enable the syncq
 * for background work.
 */

/* ARGSUSED */
void
putnext_tail(syncq_t *sq, queue_t *qp, uint32_t passflags)
{
        uint16_t        flags = sq->sq_flags;

        ASSERT(MUTEX_HELD(SQLOCK(sq)));
        ASSERT(MUTEX_NOT_HELD(QLOCK(qp)));

        /* Clear SQ_EXCL if set in passflags */
        if (passflags & SQ_EXCL) {
                flags &= ~SQ_EXCL;
        }
        if (flags & SQ_WANTWAKEUP) {
                flags &= ~SQ_WANTWAKEUP;
                cv_broadcast(&sq->sq_wait);
        }
        if (flags & SQ_WANTEXWAKEUP) {
                flags &= ~SQ_WANTEXWAKEUP;
                cv_broadcast(&sq->sq_exitwait);
        }
        sq->sq_flags = flags;

        /*
         * We have cleared SQ_EXCL if we were asked to, and started
         * the wakeup process for waiters.  If there are no writers
         * then we need to drain the syncq if we were told to, or
         * enable the background thread to do it.
         */
        if (!(flags & (SQ_STAYAWAY|SQ_EXCL))) {
                if ((passflags & SQ_QUEUED) ||
                    (sq->sq_svcflags & SQ_DISABLED)) {
                        /* drain_syncq will take care of events in the list */
                        drain_syncq(sq);
                        return;
                } else if (flags & SQ_QUEUED) {
                        sqenable(sq);
                }
        }
        /* Drop the SQLOCK on exit */
        mutex_exit(SQLOCK(sq));
        TRACE_3(TR_FAC_STREAMS_FR, TR_PUTNEXT_END,
            "putnext_end:(%p, %p, %p) done", NULL, qp, sq);
}

void
set_qend(queue_t *q)
{
        mutex_enter(QLOCK(q));
        if (!O_SAMESTR(q))
                q->q_flag |= QEND;
        else
                q->q_flag &= ~QEND;
        mutex_exit(QLOCK(q));
        q = _OTHERQ(q);
        mutex_enter(QLOCK(q));
        if (!O_SAMESTR(q))
                q->q_flag |= QEND;
        else
                q->q_flag &= ~QEND;
        mutex_exit(QLOCK(q));
}

/*
 * Set QFULL in next service procedure queue (that cares) if not already
 * set and if there are already more messages on the syncq than
 * sq_max_size.  If sq_max_size is 0, no flow control will be asserted on
 * any syncq.
 *
 * The fq here is the next queue with a service procedure.  This is where
 * we would fail canputnext, so this is where we need to set QFULL.
 * In the case when fq != q we need to take QLOCK(fq) to set QFULL flag.
 *
 * We already have QLOCK at this point. To avoid cross-locks with
 * freezestr() which grabs all QLOCKs and with strlock() which grabs both
 * SQLOCK and sd_reflock, we need to drop respective locks first.
 */
void
set_qfull(queue_t *q)
{
        queue_t         *fq = NULL;

        ASSERT(MUTEX_HELD(QLOCK(q)));
        if ((sq_max_size != 0) && (!(q->q_nfsrv->q_flag & QFULL)) &&
            (q->q_syncqmsgs > sq_max_size)) {
                if ((fq = q->q_nfsrv) == q) {
                        fq->q_flag |= QFULL;
                } else {
                        mutex_exit(QLOCK(q));
                        mutex_enter(QLOCK(fq));
                        fq->q_flag |= QFULL;
                        mutex_exit(QLOCK(fq));
                        mutex_enter(QLOCK(q));
                }
        }
}

void
clr_qfull(queue_t *q)
{
        queue_t *oq = q;

        q = q->q_nfsrv;
        /* Fast check if there is any work to do before getting the lock. */
        if ((q->q_flag & (QFULL|QWANTW)) == 0) {
                return;
        }

        /*
         * Do not reset QFULL (and backenable) if the q_count is the reason
         * for QFULL being set.
         */
        mutex_enter(QLOCK(q));
        /*
         * If queue is empty i.e q_mblkcnt is zero, queue can not be full.
         * Hence clear the QFULL.
         * If both q_count and q_mblkcnt are less than the hiwat mark,
         * clear the QFULL.
         */
        if (q->q_mblkcnt == 0 || ((q->q_count < q->q_hiwat) &&
            (q->q_mblkcnt < q->q_hiwat))) {
                q->q_flag &= ~QFULL;
                /*
                 * A little more confusing, how about this way:
                 * if someone wants to write,
                 * AND
                 *    both counts are less than the lowat mark
                 *    OR
                 *    the lowat mark is zero
                 * THEN
                 * backenable
                 */
                if ((q->q_flag & QWANTW) &&
                    (((q->q_count < q->q_lowat) &&
                    (q->q_mblkcnt < q->q_lowat)) || q->q_lowat == 0)) {
                        q->q_flag &= ~QWANTW;
                        mutex_exit(QLOCK(q));
                        backenable(oq, 0);
                } else
                        mutex_exit(QLOCK(q));
        } else
                mutex_exit(QLOCK(q));
}

/*
 * Set the forward service procedure pointer.
 *
 * Called at insert-time to cache a queue's next forward service procedure in
 * q_nfsrv; used by canput() and canputnext().  If the queue to be inserted
 * has a service procedure then q_nfsrv points to itself.  If the queue to be
 * inserted does not have a service procedure, then q_nfsrv points to the next
 * queue forward that has a service procedure.  If the queue is at the logical
 * end of the stream (driver for write side, stream head for the read side)
 * and does not have a service procedure, then q_nfsrv also points to itself.
 */
void
set_nfsrv_ptr(
        queue_t  *rnew,         /* read queue pointer to new module */
        queue_t  *wnew,         /* write queue pointer to new module */
        queue_t  *prev_rq,      /* read queue pointer to the module above */
        queue_t  *prev_wq)      /* write queue pointer to the module above */
{
        queue_t *qp;

        if (prev_wq->q_next == NULL) {
                /*
                 * Insert the driver, initialize the driver and stream head.
                 * In this case, prev_rq/prev_wq should be the stream head.
                 * _I_INSERT does not allow inserting a driver.  Make sure
                 * that it is not an insertion.
                 */
                ASSERT(!(rnew->q_flag & _QINSERTING));
                wnew->q_nfsrv = wnew;
                if (rnew->q_qinfo->qi_srvp)
                        rnew->q_nfsrv = rnew;
                else
                        rnew->q_nfsrv = prev_rq;
                prev_rq->q_nfsrv = prev_rq;
                prev_wq->q_nfsrv = prev_wq;
        } else {
                /*
                 * set up read side q_nfsrv pointer.  This MUST be done
                 * before setting the write side, because the setting of
                 * the write side for a fifo may depend on it.
                 *
                 * Suppose we have a fifo that only has pipemod pushed.
                 * pipemod has no read or write service procedures, so
                 * nfsrv for both pipemod queues points to prev_rq (the
                 * stream read head).  Now push bufmod (which has only a
                 * read service procedure).  Doing the write side first,
                 * wnew->q_nfsrv is set to pipemod's writeq nfsrv, which
                 * is WRONG; the next queue forward from wnew with a
                 * service procedure will be rnew, not the stream read head.
                 * Since the downstream queue (which in the case of a fifo
                 * is the read queue rnew) can affect upstream queues, it
                 * needs to be done first.  Setting up the read side first
                 * sets nfsrv for both pipemod queues to rnew and then
                 * when the write side is set up, wnew-q_nfsrv will also
                 * point to rnew.
                 */
                if (rnew->q_qinfo->qi_srvp) {
                        /*
                         * use _OTHERQ() because, if this is a pipe, next
                         * module may have been pushed from other end and
                         * q_next could be a read queue.
                         */
                        qp = _OTHERQ(prev_wq->q_next);
                        while (qp && qp->q_nfsrv != qp) {
                                qp->q_nfsrv = rnew;
                                qp = backq(qp);
                        }
                        rnew->q_nfsrv = rnew;
                } else
                        rnew->q_nfsrv = prev_rq->q_nfsrv;

                /* set up write side q_nfsrv pointer */
                if (wnew->q_qinfo->qi_srvp) {
                        wnew->q_nfsrv = wnew;

                        /*
                         * For insertion, need to update nfsrv of the modules
                         * above which do not have a service routine.
                         */
                        if (rnew->q_flag & _QINSERTING) {
                                for (qp = prev_wq;
                                    qp != NULL && qp->q_nfsrv != qp;
                                    qp = backq(qp)) {
                                        qp->q_nfsrv = wnew->q_nfsrv;
                                }
                        }
                } else {
                        if (prev_wq->q_next == prev_rq)
                                /*
                                 * Since prev_wq/prev_rq are the middle of a
                                 * fifo, wnew/rnew will also be the middle of
                                 * a fifo and wnew's nfsrv is same as rnew's.
                                 */
                                wnew->q_nfsrv = rnew->q_nfsrv;
                        else
                                wnew->q_nfsrv = prev_wq->q_next->q_nfsrv;
                }
        }
}

/*
 * Reset the forward service procedure pointer; called at remove-time.
 */
void
reset_nfsrv_ptr(queue_t *rqp, queue_t *wqp)
{
        queue_t *tmp_qp;

        /* Reset the write side q_nfsrv pointer for _I_REMOVE */
        if ((rqp->q_flag & _QREMOVING) && (wqp->q_qinfo->qi_srvp != NULL)) {
                for (tmp_qp = backq(wqp);
                    tmp_qp != NULL && tmp_qp->q_nfsrv == wqp;
                    tmp_qp = backq(tmp_qp)) {
                        tmp_qp->q_nfsrv = wqp->q_nfsrv;
                }
        }

        /* reset the read side q_nfsrv pointer */
        if (rqp->q_qinfo->qi_srvp) {
                if (wqp->q_next) {      /* non-driver case */
                        tmp_qp = _OTHERQ(wqp->q_next);
                        while (tmp_qp && tmp_qp->q_nfsrv == rqp) {
                                /* Note that rqp->q_next cannot be NULL */
                                ASSERT(rqp->q_next != NULL);
                                tmp_qp->q_nfsrv = rqp->q_next->q_nfsrv;
                                tmp_qp = backq(tmp_qp);
                        }
                }
        }
}

/*
 * This routine should be called after all stream geometry changes to update
 * the stream head cached struio() rd/wr queue pointers. Note must be called
 * with the streamlock()ed.
 *
 * Note: only enables Synchronous STREAMS for a side of a Stream which has
 *       an explicit synchronous barrier module queue. That is, a queue that
 *       has specified a struio() type.
 */
static void
strsetuio(stdata_t *stp)
{
        queue_t *wrq;

        if (stp->sd_flag & STPLEX) {
                /*
                 * Not streamhead, but a mux, so no Synchronous STREAMS.
                 */
                stp->sd_struiowrq = NULL;
                stp->sd_struiordq = NULL;
                return;
        }
        /*
         * Scan the write queue(s) while synchronous
         * until we find a qinfo uio type specified.
         */
        wrq = stp->sd_wrq->q_next;
        while (wrq) {
                if (wrq->q_struiot == STRUIOT_NONE) {
                        wrq = 0;
                        break;
                }
                if (wrq->q_struiot != STRUIOT_DONTCARE)
                        break;
                if (! _SAMESTR(wrq)) {
                        wrq = 0;
                        break;
                }
                wrq = wrq->q_next;
        }
        stp->sd_struiowrq = wrq;
        /*
         * Scan the read queue(s) while synchronous
         * until we find a qinfo uio type specified.
         */
        wrq = stp->sd_wrq->q_next;
        while (wrq) {
                if (_RD(wrq)->q_struiot == STRUIOT_NONE) {
                        wrq = 0;
                        break;
                }
                if (_RD(wrq)->q_struiot != STRUIOT_DONTCARE)
                        break;
                if (! _SAMESTR(wrq)) {
                        wrq = 0;
                        break;
                }
                wrq = wrq->q_next;
        }
        stp->sd_struiordq = wrq ? _RD(wrq) : 0;
}

/*
 * pass_wput, unblocks the passthru queues, so that
 * messages can arrive at muxs lower read queue, before
 * I_LINK/I_UNLINK is acked/nacked.
 */
static void
pass_wput(queue_t *q, mblk_t *mp)
{
        syncq_t *sq;

        sq = _RD(q)->q_syncq;
        if (sq->sq_flags & SQ_BLOCKED)
                unblocksq(sq, SQ_BLOCKED, 0);
        putnext(q, mp);
}

/*
 * Set up queues for the link/unlink.
 * Create a new queue and block it and then insert it
 * below the stream head on the lower stream.
 * This prevents any messages from arriving during the setq
 * as well as while the mux is processing the LINK/I_UNLINK.
 * The blocked passq is unblocked once the LINK/I_UNLINK has
 * been acked or nacked or if a message is generated and sent
 * down muxs write put procedure.
 * See pass_wput().
 *
 * After the new queue is inserted, all messages coming from below are
 * blocked. The call to strlock will ensure that all activity in the stream head
 * read queue syncq is stopped (sq_count drops to zero).
 */
static queue_t *
link_addpassthru(stdata_t *stpdown)
{
        queue_t *passq;
        sqlist_t sqlist;

        passq = allocq();
        STREAM(passq) = STREAM(_WR(passq)) = stpdown;
        /* setq might sleep in allocator - avoid holding locks. */
        setq(passq, &passthru_rinit, &passthru_winit, NULL, QPERQ,
            SQ_CI|SQ_CO, B_FALSE);
        claimq(passq);
        blocksq(passq->q_syncq, SQ_BLOCKED, 1);
        insertq(STREAM(passq), passq);

        /*
         * Use strlock() to wait for the stream head sq_count to drop to zero
         * since we are going to change q_ptr in the stream head.  Note that
         * insertq() doesn't wait for any syncq counts to drop to zero.
         */
        sqlist.sqlist_head = NULL;
        sqlist.sqlist_index = 0;
        sqlist.sqlist_size = sizeof (sqlist_t);
        sqlist_insert(&sqlist, _RD(stpdown->sd_wrq)->q_syncq);
        strlock(stpdown, &sqlist);
        strunlock(stpdown, &sqlist);

        releaseq(passq);
        return (passq);
}

/*
 * Let messages flow up into the mux by removing
 * the passq.
 */
static void
link_rempassthru(queue_t *passq)
{
        claimq(passq);
        removeq(passq);
        releaseq(passq);
        freeq(passq);
}

/*
 * Wait for the condition variable pointed to by `cvp' to be signaled,
 * or for `tim' milliseconds to elapse, whichever comes first.  If `tim'
 * is negative, then there is no time limit.  If `nosigs' is non-zero,
 * then the wait will be non-interruptible.
 *
 * Returns >0 if signaled, 0 if interrupted, or -1 upon timeout.
 */
clock_t
str_cv_wait(kcondvar_t *cvp, kmutex_t *mp, clock_t tim, int nosigs)
{
        clock_t ret;

        if (tim < 0) {
                if (nosigs) {
                        cv_wait(cvp, mp);
                        ret = 1;
                } else {
                        ret = cv_wait_sig(cvp, mp);
                }
        } else if (tim > 0) {
                /*
                 * convert milliseconds to clock ticks
                 */
                if (nosigs) {
                        ret = cv_reltimedwait(cvp, mp,
                            MSEC_TO_TICK_ROUNDUP(tim), TR_CLOCK_TICK);
                } else {
                        ret = cv_reltimedwait_sig(cvp, mp,
                            MSEC_TO_TICK_ROUNDUP(tim), TR_CLOCK_TICK);
                }
        } else {
                ret = -1;
        }
        return (ret);
}

/*
 * Wait until the stream head can determine if it is at the mark but
 * don't wait forever to prevent a race condition between the "mark" state
 * in the stream head and any mark state in the caller/user of this routine.
 *
 * This is used by sockets and for a socket it would be incorrect
 * to return a failure for SIOCATMARK when there is no data in the receive
 * queue and the marked urgent data is traveling up the stream.
 *
 * This routine waits until the mark is known by waiting for one of these
 * three events:
 *      The stream head read queue becoming non-empty (including an EOF).
 *      The STRATMARK flag being set (due to a MSGMARKNEXT message).
 *      The STRNOTATMARK flag being set (which indicates that the transport
 *      has sent a MSGNOTMARKNEXT message to indicate that it is not at
 *      the mark).
 *
 * The routine returns 1 if the stream is at the mark; 0 if it can
 * be determined that the stream is not at the mark.
 * If the wait times out and it can't determine
 * whether or not the stream might be at the mark the routine will return -1.
 *
 * Note: This routine should only be used when a mark is pending i.e.,
 * in the socket case the SIGURG has been posted.
 * Note2: This can not wakeup just because synchronous streams indicate
 * that data is available since it is not possible to use the synchronous
 * streams interfaces to determine the b_flag value for the data queued below
 * the stream head.
 */
int
strwaitmark(vnode_t *vp)
{
        struct stdata *stp = vp->v_stream;
        queue_t *rq = _RD(stp->sd_wrq);
        int mark;

        mutex_enter(&stp->sd_lock);
        while (rq->q_first == NULL &&
            !(stp->sd_flag & (STRATMARK|STRNOTATMARK|STREOF))) {
                stp->sd_flag |= RSLEEP;

                /* Wait for 100 milliseconds for any state change. */
                if (str_cv_wait(&rq->q_wait, &stp->sd_lock, 100, 1) == -1) {
                        mutex_exit(&stp->sd_lock);
                        return (-1);
                }
        }
        if (stp->sd_flag & STRATMARK)
                mark = 1;
        else if (rq->q_first != NULL && (rq->q_first->b_flag & MSGMARK))
                mark = 1;
        else
                mark = 0;

        mutex_exit(&stp->sd_lock);
        return (mark);
}

/*
 * Set a read side error. If persist is set change the socket error
 * to persistent. If errfunc is set install the function as the exported
 * error handler.
 */
void
strsetrerror(vnode_t *vp, int error, int persist, errfunc_t errfunc)
{
        struct stdata *stp = vp->v_stream;

        mutex_enter(&stp->sd_lock);
        stp->sd_rerror = error;
        if (error == 0 && errfunc == NULL)
                stp->sd_flag &= ~STRDERR;
        else
                stp->sd_flag |= STRDERR;
        if (persist) {
                stp->sd_flag &= ~STRDERRNONPERSIST;
        } else {
                stp->sd_flag |= STRDERRNONPERSIST;
        }
        stp->sd_rderrfunc = errfunc;
        if (error != 0 || errfunc != NULL) {
                cv_broadcast(&_RD(stp->sd_wrq)->q_wait);        /* readers */
                cv_broadcast(&stp->sd_wrq->q_wait);             /* writers */
                cv_broadcast(&stp->sd_monitor);                 /* ioctllers */

                mutex_exit(&stp->sd_lock);
                pollwakeup(&stp->sd_pollist, POLLERR);
                mutex_enter(&stp->sd_lock);

                if (stp->sd_sigflags & S_ERROR)
                        strsendsig(stp->sd_siglist, S_ERROR, 0, error);
        }
        mutex_exit(&stp->sd_lock);
}

/*
 * Set a write side error. If persist is set change the socket error
 * to persistent.
 */
void
strsetwerror(vnode_t *vp, int error, int persist, errfunc_t errfunc)
{
        struct stdata *stp = vp->v_stream;

        mutex_enter(&stp->sd_lock);
        stp->sd_werror = error;
        if (error == 0 && errfunc == NULL)
                stp->sd_flag &= ~STWRERR;
        else
                stp->sd_flag |= STWRERR;
        if (persist) {
                stp->sd_flag &= ~STWRERRNONPERSIST;
        } else {
                stp->sd_flag |= STWRERRNONPERSIST;
        }
        stp->sd_wrerrfunc = errfunc;
        if (error != 0 || errfunc != NULL) {
                cv_broadcast(&_RD(stp->sd_wrq)->q_wait);        /* readers */
                cv_broadcast(&stp->sd_wrq->q_wait);             /* writers */
                cv_broadcast(&stp->sd_monitor);                 /* ioctllers */

                mutex_exit(&stp->sd_lock);
                pollwakeup(&stp->sd_pollist, POLLERR);
                mutex_enter(&stp->sd_lock);

                if (stp->sd_sigflags & S_ERROR)
                        strsendsig(stp->sd_siglist, S_ERROR, 0, error);
        }
        mutex_exit(&stp->sd_lock);
}

/*
 * Make the stream return 0 (EOF) when all data has been read.
 * No effect on write side.
 */
void
strseteof(vnode_t *vp, int eof)
{
        struct stdata *stp = vp->v_stream;

        mutex_enter(&stp->sd_lock);
        if (!eof) {
                stp->sd_flag &= ~STREOF;
                mutex_exit(&stp->sd_lock);
                return;
        }
        stp->sd_flag |= STREOF;
        if (stp->sd_flag & RSLEEP) {
                stp->sd_flag &= ~RSLEEP;
                cv_broadcast(&_RD(stp->sd_wrq)->q_wait);
        }

        mutex_exit(&stp->sd_lock);
        pollwakeup(&stp->sd_pollist, POLLIN|POLLRDNORM);
        mutex_enter(&stp->sd_lock);

        if (stp->sd_sigflags & (S_INPUT|S_RDNORM))
                strsendsig(stp->sd_siglist, S_INPUT|S_RDNORM, 0, 0);
        mutex_exit(&stp->sd_lock);
}

void
strflushrq(vnode_t *vp, int flag)
{
        struct stdata *stp = vp->v_stream;

        mutex_enter(&stp->sd_lock);
        flushq(_RD(stp->sd_wrq), flag);
        mutex_exit(&stp->sd_lock);
}

void
strsetrputhooks(vnode_t *vp, uint_t flags,
    msgfunc_t protofunc, msgfunc_t miscfunc)
{
        struct stdata *stp = vp->v_stream;

        mutex_enter(&stp->sd_lock);

        if (protofunc == NULL)
                stp->sd_rprotofunc = strrput_proto;
        else
                stp->sd_rprotofunc = protofunc;

        if (miscfunc == NULL)
                stp->sd_rmiscfunc = strrput_misc;
        else
                stp->sd_rmiscfunc = miscfunc;

        if (flags & SH_CONSOL_DATA)
                stp->sd_rput_opt |= SR_CONSOL_DATA;
        else
                stp->sd_rput_opt &= ~SR_CONSOL_DATA;

        if (flags & SH_SIGALLDATA)
                stp->sd_rput_opt |= SR_SIGALLDATA;
        else
                stp->sd_rput_opt &= ~SR_SIGALLDATA;

        if (flags & SH_IGN_ZEROLEN)
                stp->sd_rput_opt |= SR_IGN_ZEROLEN;
        else
                stp->sd_rput_opt &= ~SR_IGN_ZEROLEN;

        mutex_exit(&stp->sd_lock);
}

void
strsetwputhooks(vnode_t *vp, uint_t flags, clock_t closetime)
{
        struct stdata *stp = vp->v_stream;

        mutex_enter(&stp->sd_lock);
        stp->sd_closetime = closetime;

        if (flags & SH_SIGPIPE)
                stp->sd_wput_opt |= SW_SIGPIPE;
        else
                stp->sd_wput_opt &= ~SW_SIGPIPE;
        if (flags & SH_RECHECK_ERR)
                stp->sd_wput_opt |= SW_RECHECK_ERR;
        else
                stp->sd_wput_opt &= ~SW_RECHECK_ERR;

        mutex_exit(&stp->sd_lock);
}

void
strsetrwputdatahooks(vnode_t *vp, msgfunc_t rdatafunc, msgfunc_t wdatafunc)
{
        struct stdata *stp = vp->v_stream;

        mutex_enter(&stp->sd_lock);

        stp->sd_rputdatafunc = rdatafunc;
        stp->sd_wputdatafunc = wdatafunc;

        mutex_exit(&stp->sd_lock);
}

/* Used within framework when the queue is already locked */
void
qenable_locked(queue_t *q)
{
        stdata_t *stp = STREAM(q);

        ASSERT(MUTEX_HELD(QLOCK(q)));

        if (!q->q_qinfo->qi_srvp)
                return;

        /*
         * Do not place on run queue if already enabled or closing.
         */
        if (q->q_flag & (QWCLOSE|QENAB))
                return;

        /*
         * mark queue enabled and place on run list if it is not already being
         * serviced. If it is serviced, the runservice() function will detect
         * that QENAB is set and call service procedure before clearing
         * QINSERVICE flag.
         */
        q->q_flag |= QENAB;
        if (q->q_flag & QINSERVICE)
                return;

        /* Record the time of qenable */
        q->q_qtstamp = ddi_get_lbolt();

        /*
         * Put the queue in the stp list and schedule it for background
         * processing if it is not already scheduled or if stream head does not
         * intent to process it in the foreground later by setting
         * STRS_WILLSERVICE flag.
         */
        mutex_enter(&stp->sd_qlock);
        /*
         * If there are already something on the list, stp flags should show
         * intention to drain it.
         */
        IMPLY(STREAM_NEEDSERVICE(stp),
            (stp->sd_svcflags & (STRS_WILLSERVICE | STRS_SCHEDULED)));

        ENQUEUE(q, stp->sd_qhead, stp->sd_qtail, q_link);
        stp->sd_nqueues++;

        /*
         * If no one will drain this stream we are the first producer and
         * need to schedule it for background thread.
         */
        if (!(stp->sd_svcflags & (STRS_WILLSERVICE | STRS_SCHEDULED))) {
                /*
                 * No one will service this stream later, so we have to
                 * schedule it now.
                 */
                STRSTAT(stenables);
                stp->sd_svcflags |= STRS_SCHEDULED;
                stp->sd_servid = (void *)taskq_dispatch(streams_taskq,
                    (task_func_t *)stream_service, stp, TQ_NOSLEEP|TQ_NOQUEUE);

                if (stp->sd_servid == NULL) {
                        /*
                         * Task queue failed so fail over to the backup
                         * servicing thread.
                         */
                        STRSTAT(taskqfails);
                        /*
                         * It is safe to clear STRS_SCHEDULED flag because it
                         * was set by this thread above.
                         */
                        stp->sd_svcflags &= ~STRS_SCHEDULED;

                        /*
                         * Failover scheduling is protected by service_queue
                         * lock.
                         */
                        mutex_enter(&service_queue);
                        ASSERT((stp->sd_qhead == q) && (stp->sd_qtail == q));
                        ASSERT(q->q_link == NULL);
                        /*
                         * Append the queue to qhead/qtail list.
                         */
                        if (qhead == NULL)
                                qhead = q;
                        else
                                qtail->q_link = q;
                        qtail = q;
                        /*
                         * Clear stp queue list.
                         */
                        stp->sd_qhead = stp->sd_qtail = NULL;
                        stp->sd_nqueues = 0;
                        /*
                         * Wakeup background queue processing thread.
                         */
                        cv_signal(&services_to_run);
                        mutex_exit(&service_queue);
                }
        }
        mutex_exit(&stp->sd_qlock);
}

static void
queue_service(queue_t *q)
{
        /*
         * The queue in the list should have
         * QENAB flag set and should not have
         * QINSERVICE flag set. QINSERVICE is
         * set when the queue is dequeued and
         * qenable_locked doesn't enqueue a
         * queue with QINSERVICE set.
         */

        ASSERT(!(q->q_flag & QINSERVICE));
        ASSERT((q->q_flag & QENAB));
        mutex_enter(QLOCK(q));
        q->q_flag &= ~QENAB;
        q->q_flag |= QINSERVICE;
        mutex_exit(QLOCK(q));
        runservice(q);
}

static void
syncq_service(syncq_t *sq)
{
        STRSTAT(syncqservice);
        mutex_enter(SQLOCK(sq));
        ASSERT(!(sq->sq_svcflags & SQ_SERVICE));
        ASSERT(sq->sq_servcount != 0);
        ASSERT(sq->sq_next == NULL);

        /* if we came here from the background thread, clear the flag */
        if (sq->sq_svcflags & SQ_BGTHREAD)
                sq->sq_svcflags &= ~SQ_BGTHREAD;

        /* let drain_syncq know that it's being called in the background */
        sq->sq_svcflags |= SQ_SERVICE;
        drain_syncq(sq);
}

static void
qwriter_outer_service(syncq_t *outer)
{
        /*
         * Note that SQ_WRITER is used on the outer perimeter
         * to signal that a qwriter(OUTER) is either investigating
         * running or that it is actually running a function.
         */
        outer_enter(outer, SQ_BLOCKED|SQ_WRITER);

        /*
         * All inner syncq are empty and have SQ_WRITER set
         * to block entering the outer perimeter.
         *
         * We do not need to explicitly call write_now since
         * outer_exit does it for us.
         */
        outer_exit(outer);
}

static void
mblk_free(mblk_t *mp)
{
        dblk_t *dbp = mp->b_datap;
        frtn_t *frp = dbp->db_frtnp;

        mp->b_next = NULL;
        if (dbp->db_fthdr != NULL)
                str_ftfree(dbp);

        ASSERT(dbp->db_fthdr == NULL);
        frp->free_func(frp->free_arg);
        ASSERT(dbp->db_mblk == mp);

        if (dbp->db_credp != NULL) {
                crfree(dbp->db_credp);
                dbp->db_credp = NULL;
        }
        dbp->db_cpid = -1;
        dbp->db_struioflag = 0;
        dbp->db_struioun.cksum.flags = 0;

        kmem_cache_free(dbp->db_cache, dbp);
}

/*
 * Background processing of the stream queue list.
 */
static void
stream_service(stdata_t *stp)
{
        queue_t *q;

        mutex_enter(&stp->sd_qlock);

        STR_SERVICE(stp, q);

        stp->sd_svcflags &= ~STRS_SCHEDULED;
        stp->sd_servid = NULL;
        cv_signal(&stp->sd_qcv);
        mutex_exit(&stp->sd_qlock);
}

/*
 * Foreground processing of the stream queue list.
 */
void
stream_runservice(stdata_t *stp)
{
        queue_t *q;

        mutex_enter(&stp->sd_qlock);
        STRSTAT(rservice);
        /*
         * We are going to drain this stream queue list, so qenable_locked will
         * not schedule it until we finish.
         */
        stp->sd_svcflags |= STRS_WILLSERVICE;

        STR_SERVICE(stp, q);

        stp->sd_svcflags &= ~STRS_WILLSERVICE;
        mutex_exit(&stp->sd_qlock);
        /*
         * Help backup background thread to drain the qhead/qtail list.
         */
        while (qhead != NULL) {
                STRSTAT(qhelps);
                mutex_enter(&service_queue);
                DQ(q, qhead, qtail, q_link);
                mutex_exit(&service_queue);
                if (q != NULL)
                        queue_service(q);
        }
}

void
stream_willservice(stdata_t *stp)
{
        mutex_enter(&stp->sd_qlock);
        stp->sd_svcflags |= STRS_WILLSERVICE;
        mutex_exit(&stp->sd_qlock);
}

/*
 * Replace the cred currently in the mblk with a different one.
 * Also update db_cpid.
 */
void
mblk_setcred(mblk_t *mp, cred_t *cr, pid_t cpid)
{
        dblk_t *dbp = mp->b_datap;
        cred_t *ocr = dbp->db_credp;

        ASSERT(cr != NULL);

        if (cr != ocr) {
                crhold(dbp->db_credp = cr);
                if (ocr != NULL)
                        crfree(ocr);
        }
        /* Don't overwrite with NOPID */
        if (cpid != NOPID)
                dbp->db_cpid = cpid;
}

/*
 * If the src message has a cred, then replace the cred currently in the mblk
 * with it.
 * Also update db_cpid.
 */
void
mblk_copycred(mblk_t *mp, const mblk_t *src)
{
        dblk_t *dbp = mp->b_datap;
        cred_t *cr, *ocr;
        pid_t cpid;

        cr = msg_getcred(src, &cpid);
        if (cr == NULL)
                return;

        ocr = dbp->db_credp;
        if (cr != ocr) {
                crhold(dbp->db_credp = cr);
                if (ocr != NULL)
                        crfree(ocr);
        }
        /* Don't overwrite with NOPID */
        if (cpid != NOPID)
                dbp->db_cpid = cpid;
}

int
hcksum_assoc(mblk_t *mp,  multidata_t *mmd, pdesc_t *pd,
    uint32_t start, uint32_t stuff, uint32_t end, uint32_t value,
    uint32_t flags, int km_flags)
{
        int rc = 0;

        ASSERT(DB_TYPE(mp) == M_DATA || DB_TYPE(mp) == M_MULTIDATA);
        if (mp->b_datap->db_type == M_DATA) {
                /* Associate values for M_DATA type */
                DB_CKSUMSTART(mp) = (intptr_t)start;
                DB_CKSUMSTUFF(mp) = (intptr_t)stuff;
                DB_CKSUMEND(mp) = (intptr_t)end;
                DB_CKSUMFLAGS(mp) = flags;
                DB_CKSUM16(mp) = (uint16_t)value;

        } else {
                pattrinfo_t pa_info;

                ASSERT(mmd != NULL);

                pa_info.type = PATTR_HCKSUM;
                pa_info.len = sizeof (pattr_hcksum_t);

                if (mmd_addpattr(mmd, pd, &pa_info, B_TRUE, km_flags) != NULL) {
                        pattr_hcksum_t *hck = (pattr_hcksum_t *)pa_info.buf;

                        hck->hcksum_start_offset = start;
                        hck->hcksum_stuff_offset = stuff;
                        hck->hcksum_end_offset = end;
                        hck->hcksum_cksum_val.inet_cksum = (uint16_t)value;
                        hck->hcksum_flags = flags;
                } else {
                        rc = -1;
                }
        }
        return (rc);
}

void
hcksum_retrieve(mblk_t *mp, multidata_t *mmd, pdesc_t *pd,
    uint32_t *start, uint32_t *stuff, uint32_t *end,
    uint32_t *value, uint32_t *flags)
{
        ASSERT(DB_TYPE(mp) == M_DATA || DB_TYPE(mp) == M_MULTIDATA);
        if (mp->b_datap->db_type == M_DATA) {
                if (flags != NULL) {
                        *flags = DB_CKSUMFLAGS(mp) & HCK_FLAGS;
                        if ((*flags & (HCK_PARTIALCKSUM |
                            HCK_FULLCKSUM)) != 0) {
                                if (value != NULL)
                                        *value = (uint32_t)DB_CKSUM16(mp);
                                if ((*flags & HCK_PARTIALCKSUM) != 0) {
                                        if (start != NULL)
                                                *start =
                                                    (uint32_t)DB_CKSUMSTART(mp);
                                        if (stuff != NULL)
                                                *stuff =
                                                    (uint32_t)DB_CKSUMSTUFF(mp);
                                        if (end != NULL)
                                                *end =
                                                    (uint32_t)DB_CKSUMEND(mp);
                                }
                        }
                }
        } else {
                pattrinfo_t hck_attr = {PATTR_HCKSUM};

                ASSERT(mmd != NULL);

                /* get hardware checksum attribute */
                if (mmd_getpattr(mmd, pd, &hck_attr) != NULL) {
                        pattr_hcksum_t *hck = (pattr_hcksum_t *)hck_attr.buf;

                        ASSERT(hck_attr.len >= sizeof (pattr_hcksum_t));
                        if (flags != NULL)
                                *flags = hck->hcksum_flags;
                        if (start != NULL)
                                *start = hck->hcksum_start_offset;
                        if (stuff != NULL)
                                *stuff = hck->hcksum_stuff_offset;
                        if (end != NULL)
                                *end = hck->hcksum_end_offset;
                        if (value != NULL)
                                *value = (uint32_t)
                                    hck->hcksum_cksum_val.inet_cksum;
                }
        }
}

void
lso_info_set(mblk_t *mp, uint32_t mss, uint32_t flags)
{
        ASSERT(DB_TYPE(mp) == M_DATA);
        ASSERT((flags & ~HW_LSO_FLAGS) == 0);

        /* Set the flags */
        DB_LSOFLAGS(mp) |= flags;
        DB_LSOMSS(mp) = mss;
}

void
lso_info_cleanup(mblk_t *mp)
{
        ASSERT(DB_TYPE(mp) == M_DATA);

        /* Clear the flags */
        DB_LSOFLAGS(mp) &= ~HW_LSO_FLAGS;
        DB_LSOMSS(mp) = 0;
}

/*
 * Checksum buffer *bp for len bytes with psum partial checksum,
 * or 0 if none, and return the 16 bit partial checksum.
 */
unsigned
bcksum(uchar_t *bp, int len, unsigned int psum)
{
        int odd = len & 1;
        extern unsigned int ip_ocsum();

        if (((intptr_t)bp & 1) == 0 && !odd) {
                /*
                 * Bp is 16 bit aligned and len is multiple of 16 bit word.
                 */
                return (ip_ocsum((ushort_t *)bp, len >> 1, psum));
        }
        if (((intptr_t)bp & 1) != 0) {
                /*
                 * Bp isn't 16 bit aligned.
                 */
                unsigned int tsum;

#ifdef _LITTLE_ENDIAN
                psum += *bp;
#else
                psum += *bp << 8;
#endif
                len--;
                bp++;
                tsum = ip_ocsum((ushort_t *)bp, len >> 1, 0);
                psum += (tsum << 8) & 0xffff | (tsum >> 8);
                if (len & 1) {
                        bp += len - 1;
#ifdef _LITTLE_ENDIAN
                        psum += *bp << 8;
#else
                        psum += *bp;
#endif
                }
        } else {
                /*
                 * Bp is 16 bit aligned.
                 */
                psum = ip_ocsum((ushort_t *)bp, len >> 1, psum);
                if (odd) {
                        bp += len - 1;
#ifdef _LITTLE_ENDIAN
                        psum += *bp;
#else
                        psum += *bp << 8;
#endif
                }
        }
        /*
         * Normalize psum to 16 bits before returning the new partial
         * checksum. The max psum value before normalization is 0x3FDFE.
         */
        return ((psum >> 16) + (psum & 0xFFFF));
}

boolean_t
is_vmloaned_mblk(mblk_t *mp, multidata_t *mmd, pdesc_t *pd)
{
        boolean_t rc;

        ASSERT(DB_TYPE(mp) == M_DATA || DB_TYPE(mp) == M_MULTIDATA);
        if (DB_TYPE(mp) == M_DATA) {
                rc = (((mp)->b_datap->db_struioflag & STRUIO_ZC) != 0);
        } else {
                pattrinfo_t zcopy_attr = {PATTR_ZCOPY};

                ASSERT(mmd != NULL);
                rc = (mmd_getpattr(mmd, pd, &zcopy_attr) != NULL);
        }
        return (rc);
}

void
freemsgchain(mblk_t *mp)
{
        mblk_t  *next;

        while (mp != NULL) {
                next = mp->b_next;
                mp->b_next = NULL;

                freemsg(mp);
                mp = next;
        }
}

mblk_t *
copymsgchain(mblk_t *mp)
{
        mblk_t  *nmp = NULL;
        mblk_t  **nmpp = &nmp;

        for (; mp != NULL; mp = mp->b_next) {
                if ((*nmpp = copymsg(mp)) == NULL) {
                        freemsgchain(nmp);
                        return (NULL);
                }

                nmpp = &((*nmpp)->b_next);
        }

        return (nmp);
}

/* NOTE: Do not add code after this point. */
#undef QLOCK

/*
 * Replacement for QLOCK macro for those that can't use it.
 */
kmutex_t *
QLOCK(queue_t *q)
{
        return (&(q)->q_lock);
}

/*
 * Dummy runqueues/queuerun functions functions for backwards compatibility.
 */
#undef runqueues
void
runqueues(void)
{
}

#undef queuerun
void
queuerun(void)
{
}

/*
 * Initialize the STR stack instance, which tracks autopush and persistent
 * links.
 */
/* ARGSUSED */
static void *
str_stack_init(netstackid_t stackid, netstack_t *ns)
{
        str_stack_t     *ss;
        int i;

        ss = (str_stack_t *)kmem_zalloc(sizeof (*ss), KM_SLEEP);
        ss->ss_netstack = ns;

        /*
         * set up autopush
         */
        sad_initspace(ss);

        /*
         * set up mux_node structures.
         */
        ss->ss_devcnt = devcnt; /* In case it should change before free */
        ss->ss_mux_nodes = kmem_zalloc((sizeof (struct mux_node) *
            ss->ss_devcnt), KM_SLEEP);
        for (i = 0; i < ss->ss_devcnt; i++)
                ss->ss_mux_nodes[i].mn_imaj = i;
        return (ss);
}

/*
 * Note: run at zone shutdown and not destroy so that the PLINKs are
 * gone by the time other cleanup happens from the destroy callbacks.
 */
static void
str_stack_shutdown(netstackid_t stackid, void *arg)
{
        str_stack_t *ss = (str_stack_t *)arg;
        int i;
        cred_t *cr;

        cr = zone_get_kcred(netstackid_to_zoneid(stackid));
        ASSERT(cr != NULL);

        /* Undo all the I_PLINKs for this zone */
        for (i = 0; i < ss->ss_devcnt; i++) {
                struct mux_edge         *ep;
                ldi_handle_t            lh;
                ldi_ident_t             li;
                int                     ret;
                int                     rval;
                dev_t                   rdev;

                ep = ss->ss_mux_nodes[i].mn_outp;
                if (ep == NULL)
                        continue;
                ret = ldi_ident_from_major((major_t)i, &li);
                if (ret != 0) {
                        continue;
                }
                rdev = ep->me_dev;
                ret = ldi_open_by_dev(&rdev, OTYP_CHR, FREAD|FWRITE,
                    cr, &lh, li);
                if (ret != 0) {
                        ldi_ident_release(li);
                        continue;
                }

                ret = ldi_ioctl(lh, I_PUNLINK, (intptr_t)MUXID_ALL, FKIOCTL,
                    cr, &rval);
                if (ret) {
                        (void) ldi_close(lh, FREAD|FWRITE, cr);
                        ldi_ident_release(li);
                        continue;
                }
                (void) ldi_close(lh, FREAD|FWRITE, cr);

                /* Close layered handles */
                ldi_ident_release(li);
        }
        crfree(cr);

        sad_freespace(ss);

        kmem_free(ss->ss_mux_nodes, sizeof (struct mux_node) * ss->ss_devcnt);
        ss->ss_mux_nodes = NULL;
}

/*
 * Free the structure; str_stack_shutdown did the other cleanup work.
 */
/* ARGSUSED */
static void
str_stack_fini(netstackid_t stackid, void *arg)
{
        str_stack_t     *ss = (str_stack_t *)arg;

        kmem_free(ss, sizeof (*ss));
}