fm/ipmitopo: fix 64-bit compilation
[unleashed.git] / contrib / libpcap / atmuni31.h
blob0f85430098ced80778b064f1e61a20d8a0b0a0d1
1 /*
2 * Copyright (c) 1997 Yen Yen Lim and North Dakota State University
3 * All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. All advertising materials mentioning features or use of this software
14 * must display the following acknowledgement:
15 * This product includes software developed by Yen Yen Lim and
16 North Dakota State University
17 * 4. The name of the author may not be used to endorse or promote products
18 * derived from this software without specific prior written permission.
20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
21 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
22 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
23 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
24 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
25 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
26 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
28 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
29 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30 * POSSIBILITY OF SUCH DAMAGE.
33 /* Based on UNI3.1 standard by ATM Forum */
35 /* ATM traffic types based on VPI=0 and (the following VCI */
36 #define VCI_PPC 0x05 /* Point-to-point signal msg */
37 #define VCI_BCC 0x02 /* Broadcast signal msg */
38 #define VCI_OAMF4SC 0x03 /* Segment OAM F4 flow cell */
39 #define VCI_OAMF4EC 0x04 /* End-to-end OAM F4 flow cell */
40 #define VCI_METAC 0x01 /* Meta signal msg */
41 #define VCI_ILMIC 0x10 /* ILMI msg */
43 /* Q.2931 signalling messages */
44 #define CALL_PROCEED 0x02 /* call proceeding */
45 #define CONNECT 0x07 /* connect */
46 #define CONNECT_ACK 0x0f /* connect_ack */
47 #define SETUP 0x05 /* setup */
48 #define RELEASE 0x4d /* release */
49 #define RELEASE_DONE 0x5a /* release_done */
50 #define RESTART 0x46 /* restart */
51 #define RESTART_ACK 0x4e /* restart ack */
52 #define STATUS 0x7d /* status */
53 #define STATUS_ENQ 0x75 /* status ack */
54 #define ADD_PARTY 0x80 /* add party */
55 #define ADD_PARTY_ACK 0x81 /* add party ack */
56 #define ADD_PARTY_REJ 0x82 /* add party rej */
57 #define DROP_PARTY 0x83 /* drop party */
58 #define DROP_PARTY_ACK 0x84 /* drop party ack */
60 /* Information Element Parameters in the signalling messages */
61 #define CAUSE 0x08 /* cause */
62 #define ENDPT_REF 0x54 /* endpoint reference */
63 #define AAL_PARA 0x58 /* ATM adaptation layer parameters */
64 #define TRAFF_DESCRIP 0x59 /* atm traffic descriptors */
65 #define CONNECT_ID 0x5a /* connection identifier */
66 #define QOS_PARA 0x5c /* quality of service parameters */
67 #define B_HIGHER 0x5d /* broadband higher layer information */
68 #define B_BEARER 0x5e /* broadband bearer capability */
69 #define B_LOWER 0x5f /* broadband lower information */
70 #define CALLING_PARTY 0x6c /* calling party number */
71 #define CALLED_PARTY 0x70 /* called party nmber */
73 #define Q2931 0x09
75 /* Q.2931 signalling general messages format */
76 #define PROTO_POS 0 /* offset of protocol discriminator */
77 #define CALL_REF_POS 2 /* offset of call reference value */
78 #define MSG_TYPE_POS 5 /* offset of message type */
79 #define MSG_LEN_POS 7 /* offset of mesage length */
80 #define IE_BEGIN_POS 9 /* offset of first information element */
82 /* format of signalling messages */
83 #define TYPE_POS 0
84 #define LEN_POS 2
85 #define FIELD_BEGIN_POS 4