nptl/generic: Build generic libc-tls.c for non-mips architectures.
[uclibc-ng.git] / Rules.mak
blobf6c4b4ad452018caaf9432afac56df6ed01acadd
1 # Rules.make for uClibc
3 # Copyright (C) 2000-2008 Erik Andersen <andersen@uclibc.org>
5 # Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball.
8 # make nano-doc
9 # FOO = bar -- recursively expanded variable. Value is remebered verbatim.
10 # If it contains references to other variables, these references
11 # are expanded whenever this variable is _substituted_.
12 # FOO := bar -- simply expanded variable. Right hand is expanded when
13 # the variable is _defined_. Therefore faster than =.
14 # FOO ?= bar -- set a value only if it is not already set
15 # (behaves as =, not :=).
16 # FOO += bar -- append; if FOO is not defined, acts like = (not :=).
19 # check for proper make version
20 ifneq ($(findstring x3.7,x$(MAKE_VERSION)),)
21 $(error Your make is too old $(MAKE_VERSION). Go get at least 3.80)
22 endif
24 #-----------------------------------------------------------
25 # This file contains rules which are shared between multiple
26 # Makefiles. All normal configuration options live in the
27 # file named ".config". Don't mess with this file unless
28 # you know what you are doing.
31 #-----------------------------------------------------------
32 # If you are running a cross compiler, you will want to set
33 # 'CROSS' to something more interesting ... Target
34 # architecture is determined by asking the CC compiler what
35 # arch it compiles things for, so unless your compiler is
36 # broken, you should not need to specify TARGET_ARCH.
38 # Most people will set this stuff on the command line, i.e.
39 # make CROSS=arm-linux-
40 # will build uClibc for 'arm'.
42 ifndef CROSS
43 CROSS=
44 endif
45 CC = $(CROSS)gcc
46 AR = $(CROSS)ar
47 LD = $(CROSS)ld
48 NM = $(CROSS)nm
49 OBJDUMP = $(CROSS)objdump
50 STRIPTOOL = $(CROSS)strip
52 INSTALL = install
53 LN = ln
54 RM = rm -f
55 TAR = tar
56 SED = sed
57 AWK = awk
59 STRIP_FLAGS ?= -x -R .note -R .comment
61 ## unused? if yes, remove after 0.9.31
62 ## UNIFDEF := $(top_builddir)extra/scripts/unifdef
64 # Select the compiler needed to build binaries for your development system
65 HOSTCC = gcc
66 BUILD_CFLAGS = -Os -Wall
68 #---------------------------------------------------------
69 # Nothing beyond this point should ever be touched by mere
70 # mortals. Unless you hang out with the gods, you should
71 # probably leave all this stuff alone.
73 # strip quotes
74 qstrip = $(strip $(subst ",,$(1)))
75 #"))
77 # Pull in the user's uClibc configuration
78 ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
79 -include $(top_builddir).config
80 endif
81 TARGET_ARCH:=$(call qstrip,$(TARGET_ARCH))
82 ifeq ($(TARGET_ARCH),)
83 ARCH ?= $(shell uname -m | $(SED) -e s/i.86/i386/ \
84 -e s/sun.*/sparc/ -e s/sparc.*/sparc/ \
85 -e s/arm.*/arm/ -e s/sa110/arm/ \
86 -e s/sh.*/sh/ \
87 -e s/s390x/s390/ -e s/parisc.*/hppa/ \
88 -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
89 -e s/xtensa.*/xtensa/ )
90 else
91 ARCH = $(TARGET_ARCH)
92 endif
93 export ARCH
95 # Make certain these contain a final "/", but no "//"s.
96 TARGET_SUBARCH:=$(call qstrip,$(shell grep -s '^TARGET_SUBARCH' $(top_builddir)/.config | $(SED) -e 's/^TARGET_SUBARCH=//'))
97 TARGET_SUBARCH:=$(call qstrip,$(TARGET_SUBARCH))
98 RUNTIME_PREFIX:=$(strip $(subst //,/, $(subst ,/, $(call qstrip,$(RUNTIME_PREFIX)))))
99 DEVEL_PREFIX:=$(strip $(subst //,/, $(subst ,/, $(call qstrip,$(DEVEL_PREFIX)))))
100 MULTILIB_DIR:=$(strip $(subst //,/, $(subst ,/, $(call qstrip,$(MULTILIB_DIR)))))
101 KERNEL_HEADERS:=$(strip $(subst //,/, $(subst ,/, $(call qstrip,$(KERNEL_HEADERS)))))
102 export RUNTIME_PREFIX DEVEL_PREFIX KERNEL_HEADERS MULTILIB_DIR
105 # Now config hard core
106 MAJOR_VERSION := 0
107 MINOR_VERSION := 9
108 SUBLEVEL := 32
109 EXTRAVERSION :=-git
110 VERSION := $(MAJOR_VERSION).$(MINOR_VERSION).$(SUBLEVEL)
111 ABI_VERSION := $(MAJOR_VERSION)
112 ifneq ($(EXTRAVERSION),)
113 VERSION := $(VERSION)$(EXTRAVERSION)
114 endif
115 # Ensure consistent sort order, 'gcc -print-search-dirs' behavior, etc.
116 LC_ALL := C
117 export MAJOR_VERSION MINOR_VERSION SUBLEVEL VERSION ABI_VERSION LC_ALL
119 LIBC := libc
120 SHARED_LIBNAME := $(LIBC).so.$(ABI_VERSION)
122 ifneq ($(findstring $(TARGET_ARCH) , hppa64 ia64 mips64 powerpc64 s390x sparc64 x86_64 ),)
123 UCLIBC_LDSO_NAME := ld64-uClibc
124 ARCH_NATIVE_BIT := 64
125 else
126 UCLIBC_LDSO_NAME := ld-uClibc
127 ARCH_NATIVE_BIT := 32
128 endif
129 UCLIBC_LDSO := $(UCLIBC_LDSO_NAME).so.$(ABI_VERSION)
130 NONSHARED_LIBNAME := uclibc_nonshared.a
131 libc := $(top_builddir)lib/$(SHARED_LIBNAME)
132 libc.depend := $(top_builddir)lib/$(SHARED_LIBNAME:.$(ABI_VERSION)=)
133 libdl.depend := $(top_builddir)lib/libdl.so
134 libpthread.depend := $(top_builddir)lib/libpthread.so
135 interp := $(top_builddir)lib/interp.os
136 ldso := $(top_builddir)lib/$(UCLIBC_LDSO)
137 headers_dep := $(top_builddir)include/bits/sysnum.h
138 sub_headers := $(headers_dep)
140 #LIBS :=$(interp) -L$(top_builddir)lib -lc
141 LIBS := $(interp) -L$(top_builddir)lib $(libc:.$(ABI_VERSION)=)
143 # Make sure DESTDIR and PREFIX can be used to install
144 # PREFIX is a uClibcism while DESTDIR is a common GNUism
145 ifndef PREFIX
146 PREFIX = $(DESTDIR)
147 endif
149 ifneq ($(HAVE_SHARED),y)
150 libc :=
151 interp :=
152 ldso :=
153 endif
155 comma:=,
156 space:= #
158 ifndef CROSS
159 CROSS=$(call qstrip,$(CROSS_COMPILER_PREFIX))
160 endif
162 # A nifty macro to make testing gcc features easier
163 check_gcc=$(shell \
164 if $(CC) $(1) -S -o /dev/null -xc /dev/null > /dev/null 2>&1; \
165 then echo "$(1)"; else echo "$(2)"; fi)
166 check_as=$(shell \
167 if $(CC) -Wa,$(1) -Wa,-Z -c -o /dev/null -xassembler /dev/null > /dev/null 2>&1; \
168 then echo "-Wa,$(1)"; fi)
169 check_ld=$(shell \
170 if $(LD) $(1) -o /dev/null -b binary /dev/null > /dev/null 2>&1; \
171 then echo "$(1)"; fi)
173 ARFLAGS:=cr
176 # Flags in OPTIMIZATION are used only for non-debug builds
178 OPTIMIZATION:=
179 # Use '-Os' optimization if available, else use -O2, allow Config to override
180 OPTIMIZATION+=$(call check_gcc,-Os,-O2)
181 # Use the gcc 3.4 -funit-at-a-time optimization when available
182 OPTIMIZATION+=$(call check_gcc,-funit-at-a-time,)
183 # shrinks code by about 0.1%
184 OPTIMIZATION+=$(call check_gcc,-fmerge-all-constants)
186 GCC_MAJOR_VER?=$(shell $(CC) -dumpversion | cut -d . -f 1)
187 #GCC_MINOR_VER?=$(shell $(CC) -dumpversion | cut -d . -f 2)
189 ifeq ($(GCC_MAJOR_VER),4)
190 # shrinks code, results are from 4.0.2
191 # 0.36%
192 OPTIMIZATION+=$(call check_gcc,-fno-tree-loop-optimize,)
193 # 0.34%
194 OPTIMIZATION+=$(call check_gcc,-fno-tree-dominator-opts,)
195 # 0.1%
196 OPTIMIZATION+=$(call check_gcc,-fno-strength-reduce,)
197 endif
200 # CPU_CFLAGS-y contain options which are not warnings,
201 # not include or library paths, and not optimizations.
203 # Why -funsigned-char: I hunted a bug related to incorrect
204 # sign extension of 'char' type for 10 hours straight. Not fun.
205 CPU_CFLAGS-y := -funsigned-char -fno-builtin
207 CPU_CFLAGS-y += $(call check_gcc,-fno-asm,)
209 LDADD_LIBFLOAT=
210 ifeq ($(UCLIBC_HAS_SOFT_FLOAT),y)
211 # If -msoft-float isn't supported, we want an error anyway.
212 # Hmm... might need to revisit this for arm since it has 2 different
213 # soft float encodings.
214 ifneq ($(TARGET_ARCH),nios)
215 ifneq ($(TARGET_ARCH),nios2)
216 ifneq ($(TARGET_ARCH),sh)
217 CPU_CFLAGS-y += -msoft-float
218 endif
219 endif
220 endif
221 ifeq ($(TARGET_ARCH),arm)
222 # No longer needed with current toolchains, but leave it here for now.
223 # If anyone is actually still using gcc 2.95 (say), they can uncomment it.
224 # LDADD_LIBFLOAT=-lfloat
225 endif
226 endif
228 CPU_CFLAGS-y += $(call check_gcc,-std=gnu99,)
230 CPU_CFLAGS-$(UCLIBC_FORMAT_SHARED_FLAT) += -mid-shared-library
231 CPU_CFLAGS-$(UCLIBC_FORMAT_FLAT_SEP_DATA) += -msep-data
233 CPU_LDFLAGS-$(ARCH_LITTLE_ENDIAN) += -Wl,-EL
234 CPU_LDFLAGS-$(ARCH_BIG_ENDIAN) += -Wl,-EB
236 PICFLAG-y := -fPIC
237 PICFLAG-$(UCLIBC_FORMAT_FDPIC_ELF) := -mfdpic
238 PICFLAG := $(PICFLAG-y)
239 PIEFLAG_NAME:=-fPIE
241 # Some nice CPU specific optimizations
242 ifeq ($(TARGET_ARCH),i386)
243 OPTIMIZATION+=$(call check_gcc,-fomit-frame-pointer,)
245 ifeq ($(CONFIG_386)$(CONFIG_486)$(CONFIG_586)$(CONFIG_586MMX),y)
246 # Non-SSE capable processor.
247 # NB: this may make SSE insns segfault!
248 # -O1 -march=pentium3, -Os -msse etc are known to be affected.
249 # See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=13685
250 # -m32 is needed if host is 64-bit
251 OPTIMIZATION+=$(call check_gcc,-m32 -mpreferred-stack-boundary=2,)
252 else
253 OPTIMIZATION+=$(call check_gcc,-mpreferred-stack-boundary=4,)
254 endif
256 # Choice of alignment (please document why!)
257 # -falign-labels: in-line labels
258 # (reachable by normal code flow, aligning will insert nops
259 # which will be executed - may even make things slower)
260 # -falign-jumps: reachable only by a jump
261 # Generic: no alignment at all (smallest code)
262 GCC_FALIGN=$(call check_gcc,-falign-functions=1 -falign-jumps=1 -falign-labels=1 -falign-loops=1,-malign-jumps=1 -malign-loops=1)
263 ifeq ($(CONFIG_K7),y)
264 # Align functions to four bytes, use default for jumps and loops (why?)
265 GCC_FALIGN=$(call check_gcc,-falign-functions=4 -falign-labels=1,-malign-functions=4)
266 endif
267 ifeq ($(CONFIG_CRUSOE),y)
268 # Use compiler's default for functions, jumps and loops (why?)
269 GCC_FALIGN=$(call check_gcc,-falign-functions=0 -falign-labels=1,-malign-functions=0)
270 endif
271 ifeq ($(CONFIG_CYRIXIII),y)
272 # Use compiler's default for functions, jumps and loops (why?)
273 GCC_FALIGN=$(call check_gcc,-falign-functions=0 -falign-labels=1,-malign-functions=0)
274 endif
275 OPTIMIZATION+=$(GCC_FALIGN)
277 # Putting each function and data object into its own section
278 # allows for kbytes of less text if users link against static uclibc
279 # using ld --gc-sections.
280 # ld 2.18 can't do that (yet?) for shared libraries, so we itself
281 # do not use --gc-sections at shared lib link time.
282 # However, in combination with sections being sorted by alignment
283 # it does result in much reduced padding:
284 # text data bss dec hex
285 # 235319 1472 5992 242783 3b45f old.so
286 # 234104 1472 5980 241556 3af94 new.so
287 # Without -ffunction-sections, all functions will get aligned
288 # to 4 byte boundary by as/ld. This is arguably a bug in as.
289 # It specifies 4 byte align for .text even if not told to do so:
290 # Idx Name Size VMA LMA File off Algn
291 # 0 .text xxxxxxxx 00000000 00000000 xxxxxxxx 2**2 <===!
292 CPU_CFLAGS-y += $(call check_gcc,-ffunction-sections -fdata-sections,)
293 ifneq ($(call check_ld,--sort-common),)
294 CPU_LDFLAGS-y += -Wl,--sort-common
295 endif
296 ifneq ($(call check_ld,--sort-section alignment),)
297 CPU_LDFLAGS-y += -Wl,--sort-section,alignment
298 endif
300 CPU_LDFLAGS-y+=-m32
301 CPU_CFLAGS-y+=-m32
302 CPU_CFLAGS-$(CONFIG_386)+=-march=i386
303 CPU_CFLAGS-$(CONFIG_486)+=-march=i486
304 CPU_CFLAGS-$(CONFIG_ELAN)+=-march=i486
305 CPU_CFLAGS-$(CONFIG_586)+=-march=i586
306 CPU_CFLAGS-$(CONFIG_586MMX)+=$(call check_gcc,-march=pentium-mmx,-march=i586)
307 CPU_CFLAGS-$(CONFIG_686)+=-march=i686
308 CPU_CFLAGS-$(CONFIG_PENTIUMII)+=$(call check_gcc,-march=pentium2,-march=i686)
309 CPU_CFLAGS-$(CONFIG_PENTIUMIII)+=$(call check_gcc,-march=pentium3,-march=i686)
310 CPU_CFLAGS-$(CONFIG_PENTIUM4)+=$(call check_gcc,-march=pentium4,-march=i686)
311 CPU_CFLAGS-$(CONFIG_K6)+=$(call check_gcc,-march=k6,-march=i586)
312 CPU_CFLAGS-$(CONFIG_K7)+=$(call check_gcc,-march=athlon,-march=i686)
313 CPU_CFLAGS-$(CONFIG_CRUSOE)+=-march=i686
314 CPU_CFLAGS-$(CONFIG_WINCHIPC6)+=$(call check_gcc,-march=winchip-c6,-march=i586)
315 CPU_CFLAGS-$(CONFIG_WINCHIP2)+=$(call check_gcc,-march=winchip2,-march=i586)
316 CPU_CFLAGS-$(CONFIG_CYRIXIII)+=$(call check_gcc,-march=c3,-march=i486)
317 CPU_CFLAGS-$(CONFIG_NEHEMIAH)+=$(call check_gcc,-march=c3-2,-march=i686)
318 endif
320 ifeq ($(TARGET_ARCH),sparc)
321 CPU_CFLAGS-$(CONFIG_SPARC_V7)+=-mcpu=v7
322 CPU_CFLAGS-$(CONFIG_SPARC_V8)+=-mcpu=v8
323 CPU_CFLAGS-$(CONFIG_SPARC_V9)+=-mcpu=v9
324 CPU_CFLAGS-$(CONFIG_SPARC_V9B)+=$(call check_gcc,-mcpu=v9b,-mcpu=ultrasparc)
325 endif
327 ifeq ($(TARGET_ARCH),arm)
328 OPTIMIZATION+=-fstrict-aliasing
329 CPU_CFLAGS-$(ARCH_LITTLE_ENDIAN)+=-mlittle-endian
330 CPU_CFLAGS-$(ARCH_BIG_ENDIAN)+=-mbig-endian
331 CPU_CFLAGS-$(CONFIG_GENERIC_ARM)+=
332 CPU_CFLAGS-$(CONFIG_ARM610)+=-mtune=arm610 -march=armv3
333 CPU_CFLAGS-$(CONFIG_ARM710)+=-mtune=arm710 -march=armv3
334 CPU_CFLAGS-$(CONFIG_ARM7TDMI)+=-mtune=arm7tdmi -march=armv4t
335 CPU_CFLAGS-$(CONFIG_ARM720T)+=-mtune=arm7tdmi -march=armv4t
336 CPU_CFLAGS-$(CONFIG_ARM920T)+=-mtune=arm9tdmi -march=armv4t
337 CPU_CFLAGS-$(CONFIG_ARM922T)+=-mtune=arm9tdmi -march=armv4t
338 CPU_CFLAGS-$(CONFIG_ARM926T)+=-mtune=arm9tdmi -march=armv5t
339 CPU_CFLAGS-$(CONFIG_ARM10T)+=-mtune=arm10tdmi -march=armv5t
340 CPU_CFLAGS-$(CONFIG_ARM1136JF_S)+=-mtune=arm1136jf-s -march=armv6
341 CPU_CFLAGS-$(CONFIG_ARM1176JZ_S)+=-mtune=arm1176jz-s -march=armv6
342 CPU_CFLAGS-$(CONFIG_ARM1176JZF_S)+=-mtune=arm1176jzf-s -march=armv6
343 CPU_CFLAGS-$(CONFIG_ARM_SA110)+=-mtune=strongarm110 -march=armv4
344 CPU_CFLAGS-$(CONFIG_ARM_SA1100)+=-mtune=strongarm1100 -march=armv4
345 CPU_CFLAGS-$(CONFIG_ARM_XSCALE)+=$(call check_gcc,-mtune=xscale,-mtune=strongarm110)
346 CPU_CFLAGS-$(CONFIG_ARM_XSCALE)+=-march=armv5te -Wa,-mcpu=xscale
347 CPU_CFLAGS-$(CONFIG_ARM_IWMMXT)+=-march=iwmmxt -Wa,-mcpu=iwmmxt -mabi=iwmmxt
348 CPU_CFLAGS-$(CONFIG_ARM_CORTEX_M3)+=-mcpu=cortex-m3 -mthumb
349 CPU_CFLAGS-$(CONFIG_ARM_CORTEX_M1)+=-mcpu=cortex-m1 -mthumb
350 endif
352 ifeq ($(TARGET_ARCH),mips)
353 OPTIMIZATION+=-mno-split-addresses
354 CPU_CFLAGS-$(CONFIG_MIPS_ISA_1)+=-mips1
355 CPU_CFLAGS-$(CONFIG_MIPS_ISA_2)+=-mips2 -mtune=mips2
356 CPU_CFLAGS-$(CONFIG_MIPS_ISA_3)+=-mips3 -mtune=mips3
357 CPU_CFLAGS-$(CONFIG_MIPS_ISA_4)+=-mips4 -mtune=mips4
358 CPU_CFLAGS-$(CONFIG_MIPS_ISA_MIPS32)+=-mips32 -mtune=mips32
359 CPU_CFLAGS-$(CONFIG_MIPS_ISA_MIPS32R2)+=-march=mips32r2 -mtune=mips32r2
360 CPU_CFLAGS-$(CONFIG_MIPS_ISA_MIPS64)+=-mips64 -mtune=mips32
361 ifeq ($(strip $(ARCH_BIG_ENDIAN)),y)
362 CPU_LDFLAGS-$(CONFIG_MIPS_N64_ABI)+=-Wl,-melf64btsmip
363 CPU_LDFLAGS-$(CONFIG_MIPS_O32_ABI)+=-Wl,-melf32btsmip
364 endif
365 ifeq ($(strip $(ARCH_LITTLE_ENDIAN)),y)
366 CPU_LDFLAGS-$(CONFIG_MIPS_N64_ABI)+=-Wl,-melf64ltsmip
367 CPU_LDFLAGS-$(CONFIG_MIPS_O32_ABI)+=-Wl,-melf32ltsmip
368 endif
369 CPU_CFLAGS-$(CONFIG_MIPS_N64_ABI)+=-mabi=64
370 CPU_CFLAGS-$(CONFIG_MIPS_O32_ABI)+=-mabi=32
371 CPU_CFLAGS-$(CONFIG_MIPS_N32_ABI)+=-mabi=n32
372 endif
374 ifeq ($(TARGET_ARCH),nios)
375 OPTIMIZATION+=-funaligned-struct-hack
376 CPU_LDFLAGS-y+=-Wl,-m32
377 CPU_CFLAGS-y+=-Wl,-m32
378 endif
380 ifeq ($(TARGET_ARCH),sh)
381 OPTIMIZATION+=-fstrict-aliasing
382 OPTIMIZATION+= $(call check_gcc,-mprefergot,)
383 CPU_CFLAGS-$(ARCH_LITTLE_ENDIAN)+=-ml
384 CPU_CFLAGS-$(ARCH_BIG_ENDIAN)+=-mb
385 CPU_CFLAGS-$(CONFIG_SH2)+=-m2
386 CPU_CFLAGS-$(CONFIG_SH3)+=-m3
387 ifeq ($(UCLIBC_HAS_FPU),y)
388 CPU_CFLAGS-$(CONFIG_SH2A)+=-m2a
389 CPU_CFLAGS-$(CONFIG_SH4)+=-m4
390 else
391 CPU_CFLAGS-$(CONFIG_SH2A)+=-m2a-nofpu
392 CPU_CFLAGS-$(CONFIG_SH4)+=-m4-nofpu
393 endif
394 endif
396 ifeq ($(TARGET_ARCH),sh64)
397 OPTIMIZATION+=-fstrict-aliasing
398 CPU_CFLAGS-$(ARCH_LITTLE_ENDIAN):=-ml
399 CPU_CFLAGS-$(ARCH_BIG_ENDIAN):=-mb
400 CPU_CFLAGS-$(CONFIG_SH5)+=-m5-32media
401 endif
403 ifeq ($(TARGET_ARCH),h8300)
404 SYMBOL_PREFIX=_
405 CPU_LDFLAGS-$(CONFIG_H8300H)+= -Wl,-ms8300h
406 CPU_LDFLAGS-$(CONFIG_H8S) += -Wl,-ms8300s
407 CPU_CFLAGS-$(CONFIG_H8300H) += -mh -mint32
408 CPU_CFLAGS-$(CONFIG_H8S) += -ms -mint32
409 endif
411 ifeq ($(TARGET_ARCH),i960)
412 OPTIMIZATION+=-mh -mint32 #-fsigned-char
413 endif
415 ifeq ($(TARGET_ARCH),e1)
416 OPTIMIZATION+=-mgnu-param
417 endif
419 ifeq ($(TARGET_ARCH),cris)
420 CPU_LDFLAGS-$(CONFIG_CRIS)+=-Wl,-mcrislinux
421 CPU_LDFLAGS-$(CONFIG_CRISV32)+=-Wl,-mcrislinux
422 CPU_CFLAGS-$(CONFIG_CRIS)+=-mlinux
423 PICFLAG:=-fpic
424 PIEFLAG_NAME:=-fpie
425 endif
427 ifeq ($(TARGET_ARCH),m68k)
428 # -fPIC is only supported for 68020 and above. It is not supported
429 # for 68000, 68010, or Coldfire.
430 PICFLAG:=-fpic
431 PIEFLAG_NAME:=-fpie
432 endif
434 ifeq ($(TARGET_ARCH),powerpc)
435 # PowerPC can hold 8192 entries in its GOT with -fpic which is more than
436 # enough. Therefore use -fpic which will reduce code size and generates
437 # faster code.
438 PICFLAG:=-fpic
439 PIEFLAG_NAME:=-fpie
440 PPC_HAS_REL16:=$(shell echo -e "\t.text\n\taddis 11,30,_GLOBAL_OFFSET_TABLE_-.@ha" | $(CC) -c -x assembler -o /dev/null - 2> /dev/null && echo -n y || echo -n n)
441 CPU_CFLAGS-$(PPC_HAS_REL16)+= -DHAVE_ASM_PPC_REL16
442 CPU_CFLAGS-$(CONFIG_E500) += "-D__NO_MATH_INLINES"
444 endif
446 ifeq ($(TARGET_ARCH),bfin)
447 SYMBOL_PREFIX=_
448 ifeq ($(UCLIBC_FORMAT_FDPIC_ELF),y)
449 CPU_CFLAGS-y:=-mfdpic
450 CPU_LDFLAGS-y += -Wl,-melf32bfinfd
451 PICFLAG:=-fpic
452 PIEFLAG_NAME:=-fpie
453 endif
454 ifeq ($(UCLIBC_FORMAT_SHARED_FLAT),y)
455 PICFLAG := -mleaf-id-shared-library
456 endif
457 endif
459 ifeq ($(TARGET_ARCH),frv)
460 CPU_LDFLAGS-$(CONFIG_FRV)+=-Wl,-melf32frvfd
461 # Using -pie causes the program to have an interpreter, which is
462 # forbidden, so we must make do with -shared. Unfortunately,
463 # -shared by itself would get us global function descriptors
464 # and calls through PLTs, dynamic resolution of symbols, etc,
465 # which would break as well, but -Bsymbolic comes to the rescue.
466 export LDPIEFLAG:=-shared -Wl,-Bsymbolic
467 UCLIBC_LDSO=ld.so.1
468 endif
470 ifeq ($(strip $(TARGET_ARCH)),avr32)
471 CPU_CFLAGS-$(CONFIG_AVR32_AP7) += -march=ap
472 CPU_CFLAGS-$(CONFIG_LINKRELAX) += -mrelax
473 CPU_LDFLAGS-$(CONFIG_LINKRELAX) += --relax
474 endif
476 ifeq ($(TARGET_ARCH),i960)
477 SYMBOL_PREFIX=_
478 endif
480 ifeq ($(TARGET_ARCH),microblaze)
481 SYMBOL_PREFIX=_
482 endif
484 ifeq ($(TARGET_ARCH),v850)
485 SYMBOL_PREFIX=_
486 endif
488 # Keep the check_gcc from being needlessly executed
489 ifndef PIEFLAG
490 export PIEFLAG:=$(call check_gcc,$(PIEFLAG_NAME),$(PICFLAG))
491 endif
492 # We need to keep track of both the CC PIE flag (above) as
493 # well as the LD PIE flag (below) because we can't rely on
494 # gcc passing -pie if we used -fPIE. We need to directly use -pie
495 # instead of -Wl,-pie as gcc picks up the wrong startfile/endfile
496 ifndef LDPIEFLAG
497 export LDPIEFLAG:=$(shell $(LD) --help 2>/dev/null | grep -q -- -pie && echo "-pie")
498 endif
500 # Check for --as-needed support in linker
501 ifndef LD_FLAG_ASNEEDED
502 _LD_FLAG_ASNEEDED:=$(shell $(LD) --help 2>/dev/null | grep -- --as-needed)
503 ifneq ($(_LD_FLAG_ASNEEDED),)
504 export LD_FLAG_ASNEEDED:=--as-needed
505 endif
506 endif
507 ifndef LD_FLAG_NO_ASNEEDED
508 ifdef LD_FLAG_ASNEEDED
509 export LD_FLAG_NO_ASNEEDED:=--no-as-needed
510 endif
511 endif
512 ifndef CC_FLAG_ASNEEDED
513 ifdef LD_FLAG_ASNEEDED
514 export CC_FLAG_ASNEEDED:=-Wl,$(LD_FLAG_ASNEEDED)
515 endif
516 endif
517 ifndef CC_FLAG_NO_ASNEEDED
518 ifdef LD_FLAG_NO_ASNEEDED
519 export CC_FLAG_NO_ASNEEDED:=-Wl,$(LD_FLAG_NO_ASNEEDED)
520 endif
521 endif
522 link.asneeded = $(if $(and $(CC_FLAG_ASNEEDED),$(CC_FLAG_NO_ASNEEDED)),$(CC_FLAG_ASNEEDED) $(1) $(CC_FLAG_NO_ASNEEDED))
524 # Check for AS_NEEDED support in linker script (binutils>=2.16.1 has it)
525 ifndef ASNEEDED
526 export ASNEEDED:=$(shell $(LD) --help 2>/dev/null | grep -q -- --as-needed && echo "AS_NEEDED ( $(UCLIBC_LDSO) )" || echo "$(UCLIBC_LDSO)")
527 endif
529 # Add a bunch of extra pedantic annoyingly strict checks
530 XWARNINGS=$(call qstrip,$(WARNINGS)) -Wstrict-prototypes -fno-strict-aliasing
531 ifeq ($(EXTRA_WARNINGS),y)
532 XWARNINGS+=-Wnested-externs -Wshadow -Wmissing-noreturn -Wmissing-format-attribute -Wformat=2
533 XWARNINGS+=-Wmissing-prototypes -Wmissing-declarations
534 XWARNINGS+=-Wold-style-declaration -Wold-style-definition
535 XWARNINGS+=-Wnonnull -Wundef
536 # Works only w/ gcc-3.4 and up, can't be checked for gcc-3.x w/ check_gcc()
537 #XWARNINGS+=-Wdeclaration-after-statement
538 endif
539 CPU_CFLAGS=$(call qstrip,$(CPU_CFLAGS-y))
541 SSP_DISABLE_FLAGS ?= $(call check_gcc,-fno-stack-protector,)
542 ifeq ($(UCLIBC_BUILD_SSP),y)
543 SSP_CFLAGS := $(call check_gcc,-fno-stack-protector-all,)
544 SSP_CFLAGS += $(call check_gcc,-fstack-protector,)
545 SSP_ALL_CFLAGS ?= $(call check_gcc,-fstack-protector-all,)
546 else
547 SSP_CFLAGS := $(SSP_DISABLE_FLAGS)
548 endif
550 NOSTDLIB_CFLAGS:=$(call check_gcc,-nostdlib,)
552 # Collect all CFLAGS components
553 CFLAGS := -include $(top_srcdir)include/libc-symbols.h \
554 $(XWARNINGS) $(CPU_CFLAGS) $(SSP_CFLAGS) \
555 -nostdinc -I$(top_builddir)include -I$(top_srcdir)include -I. \
556 -I$(top_srcdir)libc/sysdeps/linux \
557 -I$(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)
558 ifneq ($(strip $(UCLIBC_EXTRA_CFLAGS)),"")
559 CFLAGS += $(call qstrip,$(UCLIBC_EXTRA_CFLAGS))
560 endif
562 # We need this to be checked within libc-symbols.h
563 ifneq ($(HAVE_SHARED),y)
564 CFLAGS += -DSTATIC
565 endif
567 LDFLAG_WARN_ONCE:=$(if $(call check_ld,--warn-once),-Wl$(comma)--warn-once)
568 LDFLAG_SORT_COMMON:=$(if $(call check_ld,--sort-common),-Wl$(comma)--sort-common)
569 LDFLAG_DISCARD_ALL:=$(if $(call check_ld,--discard-all),-Wl$(comma)--discard-all)
570 LDFLAGS_NOSTRIP:=$(CPU_LDFLAGS-y) -shared \
571 -Wl,--warn-common $(LDFLAG_WARN_ONCE) -Wl,-z,combreloc
572 # binutils-2.16.1 warns about ignored sections, 2.16.91.0.3 and newer are ok
573 #LDFLAGS_NOSTRIP+=$(call check_ld,--gc-sections)
575 ifeq ($(UCLIBC_BUILD_RELRO),y)
576 LDFLAGS_NOSTRIP+=-Wl,-z,relro
577 endif
579 ifeq ($(UCLIBC_BUILD_NOW),y)
580 LDFLAGS_NOSTRIP+=-Wl,-z,now
581 endif
583 ifeq ($(LDSO_GNU_HASH_SUPPORT),y)
584 # Be sure that binutils support it
585 LDFLAGS_GNUHASH:=$(call check_ld,--hash-style=gnu)
586 ifeq ($(LDFLAGS_GNUHASH),)
587 ifneq ($(filter-out install_headers headers-y,$(MAKECMDGOALS)),)
588 $(error Your binutils do not support --hash-style option, while you want to use it)
589 endif
590 else
591 LDFLAGS_NOSTRIP += -Wl,$(LDFLAGS_GNUHASH)
592 endif
593 endif
595 LDFLAGS:=$(LDFLAGS_NOSTRIP) -Wl,-z,defs
596 ifeq ($(DODEBUG),y)
597 CFLAGS += -O0 -g3 -DDEBUG
598 else
599 CFLAGS += $(OPTIMIZATION)
600 endif
601 ifeq ($(DOSTRIP),y)
602 LDFLAGS += -Wl,-s
603 else
604 STRIPTOOL := true -Stripping_disabled
605 endif
607 ifeq ($(DOMULTI),y)
608 # we try to compile all sources at once into an object (IMA), but
609 # gcc-3.3.x does not support it
610 # gcc-3.4.x supports it, but does not need and support --combine. though fails on many sources
611 # gcc-4.0.x supports it, supports the --combine flag, but does not need it
612 # gcc-4.1(200506xx) supports it, but needs the --combine flag, else libs are useless
613 ifeq ($(GCC_MAJOR_VER),3)
614 DOMULTI:=n
615 else
616 CFLAGS+=$(call check_gcc,--combine,)
617 endif
618 else
619 DOMULTI:=n
620 endif
622 ifneq ($(strip $(UCLIBC_EXTRA_LDFLAGS)),"")
623 LDFLAGS += $(call qstrip,$(UCLIBC_EXTRA_LDFLAGS))
624 endif
626 ifeq ($(UCLIBC_HAS_THREADS),y)
627 ifeq ($(UCLIBC_HAS_THREADS_NATIVE),y)
628 PTNAME := nptl
629 else
630 ifeq ($(LINUXTHREADS_OLD),y)
631 PTNAME := linuxthreads.old
632 else
633 PTNAME := linuxthreads
634 endif
635 endif
636 PTDIR := libpthread/$(PTNAME)
637 # set up system dependencies include dirs (NOTE: order matters!)
638 ifeq ($(UCLIBC_HAS_THREADS_NATIVE),y)
639 PTINC:= -I$(top_builddir)$(PTDIR) \
640 -I$(top_srcdir)$(PTDIR) \
641 -I$(top_srcdir)$(PTDIR)/sysdeps/unix/sysv/linux/$(TARGET_ARCH)/$(TARGET_SUBARCH) \
642 -I$(top_srcdir)$(PTDIR)/sysdeps/unix/sysv/linux/$(TARGET_ARCH) \
643 -I$(top_builddir)$(PTDIR)/sysdeps/$(TARGET_ARCH) \
644 -I$(top_srcdir)$(PTDIR)/sysdeps/$(TARGET_ARCH) \
645 -I$(top_builddir)$(PTDIR)/sysdeps/unix/sysv/linux \
646 -I$(top_srcdir)$(PTDIR)/sysdeps/unix/sysv/linux \
647 -I$(top_srcdir)$(PTDIR)/sysdeps/pthread \
648 -I$(top_srcdir)$(PTDIR)/sysdeps/pthread/bits \
649 -I$(top_srcdir)ldso/ldso/$(TARGET_ARCH) \
650 -I$(top_srcdir)ldso/include
652 # Test for TLS if NPTL support was selected.
654 GCC_HAS_TLS=$(shell \
655 echo "extern __thread int foo;" | $(CC) -o /dev/null -S -xc - 2>&1)
656 ifneq ($(GCC_HAS_TLS),)
657 gcc_tls_test_fail:
658 @echo "####";
659 @echo "#### Your compiler does not support TLS and you are trying to build uClibc";
660 @echo "#### with NPTL support. Upgrade your binutils and gcc to versions which";
661 @echo "#### support TLS for your architecture. Do not contact uClibc maintainers";
662 @echo "#### about this problem.";
663 @echo "####";
664 @echo "#### Exiting...";
665 @echo "####";
666 @exit 1;
667 endif
668 else
669 PTINC := \
670 -I$(top_srcdir)$(PTDIR)/sysdeps/unix/sysv/linux/$(TARGET_ARCH) \
671 -I$(top_srcdir)$(PTDIR)/sysdeps/$(TARGET_ARCH) \
672 -I$(top_srcdir)$(PTDIR)/sysdeps/unix/sysv/linux \
673 -I$(top_srcdir)$(PTDIR)/sysdeps/pthread \
674 -I$(top_srcdir)$(PTDIR) \
675 -I$(top_srcdir)libpthread
676 endif
677 CFLAGS+=$(PTINC)
678 else
679 PTNAME :=
680 PTINC :=
681 endif
682 CFLAGS += -I$(top_srcdir)libc/sysdeps/linux/common
683 CFLAGS += -I$(KERNEL_HEADERS)
685 #CFLAGS += -iwithprefix include-fixed -iwithprefix include
686 CC_IPREFIX := $(shell $(CC) --print-file-name=include)
687 CC_INC := -isystem $(dir $(CC_IPREFIX))include-fixed -isystem $(CC_IPREFIX)
688 CFLAGS += $(CC_INC)
690 ifneq ($(DOASSERTS),y)
691 CFLAGS+=-DNDEBUG
692 endif
694 ifeq ($(SYMBOL_PREFIX),_)
695 CFLAGS+=-D__UCLIBC_UNDERSCORES__
696 endif
698 # Keep the check_as from being needlessly executed
699 ifndef ASFLAGS_NOEXEC
700 ifeq ($(UCLIBC_BUILD_NOEXECSTACK),y)
701 export ASFLAGS_NOEXEC := $(call check_as,--noexecstack)
702 else
703 export ASFLAGS_NOEXEC :=
704 endif
705 endif
706 ASFLAGS = $(ASFLAGS_NOEXEC)
708 LIBGCC_CFLAGS ?= $(CFLAGS) $(CPU_CFLAGS-y)
709 LIBGCC:=$(shell $(CC) $(LIBGCC_CFLAGS) -print-libgcc-file-name)
710 LIBGCC_DIR:=$(dir $(LIBGCC))
712 # moved from libpthread/linuxthreads
713 ifeq ($(UCLIBC_CTOR_DTOR),y)
714 SHARED_START_FILES:=$(top_builddir)lib/crti.o $(LIBGCC_DIR)crtbeginS.o
715 SHARED_END_FILES:=$(LIBGCC_DIR)crtendS.o $(top_builddir)lib/crtn.o
716 endif
718 LOCAL_INSTALL_PATH := install_dir