1 # Rules.mak for uClibc-ng
3 # Copyright (C) 2000-2008 Erik Andersen <andersen@uclibc.org>
4 # Copyright (C) 2015-2022 Waldemar Brodkorb <wbx@uclibc-ng.org>
6 # Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball.
10 # FOO = bar -- recursively expanded variable. Value is remebered verbatim.
11 # If it contains references to other variables, these references
12 # are expanded whenever this variable is _substituted_.
13 # FOO := bar -- simply expanded variable. Right hand is expanded when
14 # the variable is _defined_. Therefore faster than =.
15 # FOO ?= bar -- set a value only if it is not already set
16 # (behaves as =, not :=).
17 # FOO += bar -- append; if FOO is not defined, acts like = (not :=).
20 # check for proper make version
21 ifneq ($(findstring x3.7
,x
$(MAKE_VERSION
)),)
22 $(error Your make is too old
$(MAKE_VERSION
). Go
get at least
3.80)
25 #-----------------------------------------------------------
26 # This file contains rules which are shared between multiple
27 # Makefiles. All normal configuration options live in the
28 # file named ".config". Don't mess with this file unless
29 # you know what you are doing.
31 clean_targets
:= clean realclean distclean \
32 objclean-y headers_clean-y CLEAN_utils
33 noconfig_targets
:= menuconfig config nconfig \
34 oldaskconfig silentoldconfig oldconfig allnoconfig allyesconfig \
35 alldefconfig randconfig defconfig savedefconfig listnewconfig \
37 xconfig gconfig update-po-config mconf qconf gconf nconf conf \
38 release
dist tags help
41 #-----------------------------------------------------------
42 # If you are running a cross compiler, you will want to set
43 # 'CROSS_COMPILE' to something more interesting ... Target
44 # architecture is determined by asking the CC compiler what
45 # arch it compiles things for, so unless your compiler is
46 # broken, you should not need to specify TARGET_ARCH.
48 # Most people will set this stuff on the command line, i.e.
49 # make CROSS_COMPILE=arm-linux-
50 # will build uClibc-ng for 'arm'.
51 # CROSS is still supported for backward compatibily only
53 CROSS_COMPILE ?
= $(CROSS
)
55 CC
= $(CROSS_COMPILE
)gcc
56 AR
= $(CROSS_COMPILE
)ar
57 LD
= $(CROSS_COMPILE
)ld
58 NM
= $(CROSS_COMPILE
)nm
59 OBJDUMP
= $(CROSS_COMPILE
)objdump
60 STRIPTOOL
= $(CROSS_COMPILE
)strip
69 STRIP_FLAGS ?
= -x
-R .note
-R .comment
71 # Select the compiler needed to build binaries for your development system
75 #---------------------------------------------------------
76 # Nothing beyond this point should ever be touched by mere
77 # mortals. Unless you hang out with the gods, you should
78 # probably leave all this stuff alone.
81 qstrip
= $(strip $(subst ",,$(1)))
85 KCONFIG_CONFIG ?
= $(top_builddir
).config
86 KCONFIG_CONFIG
:= $(abspath
$(KCONFIG_CONFIG
))
88 KCONFIG_AUTOCONFIG
:= $(dir $(KCONFIG_CONFIG
))include/config
/auto.conf
89 export KCONFIG_AUTOCONFIG
90 KCONFIG_TRISTATE
:= $(dir $(KCONFIG_CONFIG
))include/config
/tristate.conf
91 export KCONFIG_TRISTATE
92 srctree
:= $(abspath
$(top_srcdir
))
94 KCONFIG_AUTOHEADER
:= $(dir $(KCONFIG_CONFIG
))include/generated
/autoconf.h
95 export KCONFIG_AUTOHEADER
96 Kconfig
:= $(abspath
$(top_srcdir
)extra
/Configs
/Config.in
)
98 # Pull in the user's uClibc-ng configuration
99 ifeq ($(filter $(noconfig_targets
) clean CLEAN_
%,$(MAKECMDGOALS
)),)
100 -include $(KCONFIG_CONFIG
)
103 TARGET_ARCH
:=$(call qstrip
,$(TARGET_ARCH
))
104 ifeq ($(TARGET_ARCH
),)
105 ARCH ?
= $(shell uname
-m |
$(SED
) -e s
/i
.86/i386
/ \
106 -e s
/sun.
*/sparc
/ -e s
/sparc.
*/sparc
/ \
107 -e s
/arm.
*/arm
/ -e s
/sa110
/arm
/ \
108 -e s
/nds32.
*/nds32
/ \
110 -e s
/s390x
/s390
/ -e s
/parisc.
*/hppa
/ \
111 -e s
/ppc.
*/powerpc
/ -e s
/mips.
*/mips
/ \
112 -e s
/xtensa.
*/xtensa
/ )
114 ARCH
= $(TARGET_ARCH
)
118 # Make certain these contain a final "/", but no "//"s.
119 scrub_path
= $(strip $(subst //,/, $(subst ,/, $(call qstrip
,$(1)))))
120 TARGET_SUBARCH
:= $(call qstrip
,$(TARGET_SUBARCH
))
121 RUNTIME_PREFIX
:= $(call scrub_path
,$(RUNTIME_PREFIX
))
122 DEVEL_PREFIX
:= $(call scrub_path
,$(DEVEL_PREFIX
))
123 MULTILIB_DIR
:= $(call scrub_path
,$(MULTILIB_DIR
))
124 KERNEL_HEADERS
:= $(call scrub_path
,$(KERNEL_HEADERS
))
125 export RUNTIME_PREFIX DEVEL_PREFIX KERNEL_HEADERS MULTILIB_DIR
128 # Now config hard core
133 VERSION
:= $(MAJOR_VERSION
).
$(MINOR_VERSION
).
$(SUBLEVEL
)
134 ABI_VERSION
:= $(MAJOR_VERSION
)
135 ifneq ($(EXTRAVERSION
),)
136 VERSION
:= $(VERSION
)$(EXTRAVERSION
)
138 # Ensure consistent sort order, 'gcc -print-search-dirs' behavior, etc.
140 export MAJOR_VERSION MINOR_VERSION SUBLEVEL VERSION ABI_VERSION LC_ALL
143 SHARED_LIBNAME
:= $(LIBC
).so.
$(ABI_VERSION
)
145 UCLIBC_LDSO_NAME
:= $(call qstrip
,$(TARGET_LDSO_NAME
))
146 ARCH_NATIVE_BIT
:= $(call qstrip
,$(TARGET_ARCH_BITS
))
148 UCLIBC_LDSO
:= $(UCLIBC_LDSO_NAME
).so.
$(ABI_VERSION
)
149 NONSHARED_LIBNAME
:= uclibc_nonshared.a
150 NONSHARED_LIBPTHREAD
:= libpthread_nonshared.a
152 libc
:= $(top_builddir
)lib
/$(SHARED_LIBNAME
)
153 libc.depend
:= $(top_builddir
)lib
/$(SHARED_LIBNAME
:.
$(ABI_VERSION
)=)
154 interp
:= $(top_builddir
)lib
/interp.os
155 ldso
:= $(top_builddir
)lib
/$(UCLIBC_LDSO
)
156 headers_dep
:= $(top_builddir
)include/bits
/sysnum.h \
157 $(top_builddir
)include/bits
/uClibc_config.h
158 sub_headers
:= $(headers_dep
)
160 LIBS
:= $(interp
) -L
$(top_builddir
)lib
$(libc
:.
$(ABI_VERSION
)=)
162 # Make sure DESTDIR and PREFIX can be used to install
163 # PREFIX is a uClibcism while DESTDIR is a common GNUism
168 ifneq ($(HAVE_SHARED
),y
)
177 ifeq ($(CROSS_COMPILE
),)
178 CROSS_COMPILE
=$(call qstrip
,$(CROSS_COMPILER_PREFIX
))
181 # A nifty macro to make testing gcc features easier
183 tf
="/tmp/cgccucl$$$$.o"; \
184 if
$(CC
) $(1) -S
-o
$$tf -xc
/dev
/null
> /dev
/null
2>&1; \
185 then echo
"$(1)"; else echo
"$(2)"; fi
; rm -f
$$tf )
187 tf
="/tmp/casucl$$$$.o"; \
188 if
$(CC
) -Wa
,$(1) -Wa
,-Z
-c
-o
$$tf -xassembler
/dev
/null
> /dev
/null
2>&1; \
189 then echo
"-Wa,$(1)"; fi
; rm -f
$$tf )
191 tf
="/tmp/clducl$$$$.c"; echo
"int _start(){return 0;}int main(){return 0;}" >$$tf; \
192 if
$(CC
) $(LDFLAG-fuse-ld
) $(CFLAG_-Wl--no-warn-mismatch
) -Wl
,$(1) $(CFLAG_-nostdlib
) -o
/dev
/null
$$tf > /dev
/null
2>&1; \
193 then echo
"$(1)"; fi
; rm -f
$$tf )
195 # Use variable indirection here so that we can have variable
196 # names with fun chars in them like equal signs
197 define check-tool-var
198 ifeq ($(filter $(clean_targets
) CLEAN_
%,$(MAKECMDGOALS
)),)
201 $$(_v
) := $$(call
$(1),$(subst %, ,$(3)))
207 # Usage: check-gcc-var,<flag>
208 # Check the C compiler to see if it supports <flag>.
209 # Export the variable CFLAG_<flag> if it does.
211 $(call check-tool-var
,check_gcc
,CFLAG
,$(1))
213 # Usage: check-as-var,<flag>
214 # Check the assembler to see if it supports <flag>. Export the
215 # variable ASFLAG_<flag> if it does (for invoking the assembler),
216 # as well CFLAG_-Wa<flag> (for invoking the compiler driver).
218 $(call check-tool-var
,check_as
,ASFLAG
,$(1))
220 export $$(_v
) = $$(if
$$(ASFLAG_
$(1)),-Wa
$$(comma
)$$(ASFLAG_
$(1)))
222 # Usage: check-ld-var,<flag>
223 # Check the linker to see if it supports <flag>. Export the
224 # variable LDFLAG_<flag> if it does (for invoking the linker),
225 # as well CFLAG_-Wl<flag> (for invoking the compiler driver).
227 $(call check-tool-var
,check_ld
,LDFLAG
,$(1))
229 export $$(_v
) = $$(if
$$(LDFLAG_
$(1)),-Wl
$$(comma
)$$(LDFLAG_
$(1)))
231 # Usage: cache-output-var,<variable>,<shell command>
232 # Execute <shell command> and cache the output in <variable>.
233 define cache-output-var
235 $(1) := $$(shell $(2))
243 # Note: The check for -nostdlib has to be before all calls to check_ld
244 $(eval
$(call check-gcc-var
,-nostdlib
))
245 $(eval
$(call check-gcc-var
,-nostartfiles
))
246 # deliberately not named CFLAG-fuse-ld since unchecked and from user
247 LDFLAG-fuse-ld
:= $(filter -fuse-ld
=%,$(call qstrip
,$(UCLIBC_EXTRA_CFLAGS
)))
248 # failed to merge target specific data of file /dev/null
249 # Could use -Wl,--script,$(top_srcdir)extra/scripts/none.lds as well.
250 $(eval
$(call check-ld-var
,--no-warn-mismatch
))
252 $(eval
$(call cache-output-var
,GCC_VER
,$(CC
) -dumpversion
))
253 GCC_VER
:= $(subst .
, ,$(GCC_VER
))
254 GCC_MAJOR_VER ?
= $(word 1,$(GCC_VER
))
255 GCC_MINOR_VER ?
= $(word 2,$(GCC_VER
))
257 # Flags in OPTIMIZATION are used only for non-debug builds
260 OPTIMIZATION-
$(GCC_MAJOR_VER
):=
261 OPTIMIZATION-
$(GCC_MAJOR_VER
).
$(GCC_MINOR_VER
):=
263 # Use '-Os' optimization if available, else use -O2, allow Config to override
264 $(eval
$(call check-gcc-var
,-Os
))
265 ifneq ($(CFLAG_-Os
),)
266 OPTIMIZATION
+= $(CFLAG_-Os
)
268 $(eval
$(call check-gcc-var
,-O2
))
269 OPTIMIZATION
+= $(CFLAG_-O2
)
271 # Use the gcc 3.4 -funit-at-a-time optimization when available
272 $(eval
$(call check-gcc-var
,-funit-at-a-time
))
273 OPTIMIZATION-3.4
+= $(CFLAG_-funit-at-a-time
)
274 $(eval
$(call check-gcc-var
,-fstrict-aliasing
))
275 OPTIMIZATION
+= $(CFLAG_-fstrict-aliasing
)
277 # CPU_CFLAGS-y contain options which are not warnings,
278 # not include or library paths, and not optimizations.
280 # Why -funsigned-char: I hunted a bug related to incorrect
281 # sign extension of 'char' type for 10 hours straight. Not fun.
282 CPU_CFLAGS-y
:= -funsigned-char
-fno-builtin
-fcommon
284 $(eval
$(call check-gcc-var
,-fno-asm
))
285 CPU_CFLAGS-y
+= $(CFLAG_-fno-asm
)
286 $(eval
$(call check-gcc-var
,-fmerge-all-constants
))
287 CPU_CFLAGS-y
+= $(CFLAG_-fmerge-all-constants
)
289 ifeq ($(UCLIBC_HAS_SOFT_FLOAT
),y
)
290 ifneq ($(TARGET_ARCH
),bfin
)
291 ifneq ($(TARGET_ARCH
),lm32
)
292 ifneq ($(TARGET_ARCH
),nios2
)
293 ifneq ($(TARGET_ARCH
),nds32
)
294 ifneq ($(TARGET_ARCH
),sh
)
295 ifneq ($(TARGET_ARCH
),c6x
)
296 ifneq ($(TARGET_ARCH
),h8300
)
297 ifneq ($(TARGET_ARCH
),arc
)
298 ifneq ($(TARGET_ARCH
),aarch64
)
299 CPU_CFLAGS-y
+= -msoft-float
311 ifeq ($(TARGET_ARCH
),aarch64
)
312 CPU_CFLAGS-y
+= -ftls-model
=initial-exec
315 $(eval
$(call check-gcc-var
,-std
=gnu99
))
316 CPU_CFLAGS-y
+= $(CFLAG_-std
=gnu99
)
318 CPU_CFLAGS-
$(UCLIBC_FORMAT_SHARED_FLAT
) += -mid-shared-library
319 CPU_CFLAGS-
$(UCLIBC_FORMAT_FLAT_SEP_DATA
) += -msep-data
321 CPU_LDFLAGS-
$(ARCH_LITTLE_ENDIAN
) += -Wl
,-EL
322 CPU_LDFLAGS-
$(ARCH_BIG_ENDIAN
) += -Wl
,-EB
325 PICFLAG-
$(UCLIBC_FORMAT_FDPIC_ELF
) := -mfdpic
326 PICFLAG-
$(UCLIBC_FORMAT_DSBT_ELF
) := -mdsbt
-fpic
327 PICFLAG
:= $(PICFLAG-y
)
330 $(eval
$(call check-gcc-var
,-fdata-sections
))
331 $(eval
$(call check-gcc-var
,-ffunction-sections
))
333 # Some nice CPU specific optimizations
334 ifeq ($(TARGET_ARCH
),i386
)
335 $(eval
$(call check-gcc-var
,-fomit-frame-pointer
))
336 OPTIMIZATION
+= $(CFLAG_-fomit-frame-pointer
)
338 ifeq ($(CONFIG_386
)$(CONFIG_486
)$(CONFIG_586
),y
)
339 # TODO: Change this to a gcc version check. This bug
340 # should be fixed with at least gcc-4.3.
341 # Non-SSE capable processor.
342 # NB: this may make SSE insns segfault!
343 # -O1 -march=pentium3, -Os -msse etc are known to be affected.
344 # See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=13685
345 # -m32 is needed if host is 64-bit
346 OPTIMIZATION
+=$(call check_gcc
,-m32
-mpreferred-stack-boundary
=2,)
348 $(eval
$(call check-gcc-var
,-mpreferred-stack-boundary
=4))
349 OPTIMIZATION
+= $(CFLAG_-mpreferred-stack-boundary
=4)
352 # Choice of alignment (please document why!)
353 # -falign-labels: in-line labels
354 # (reachable by normal code flow, aligning will insert nops
355 # which will be executed - may even make things slower)
356 # -falign-jumps: reachable only by a jump
357 # Generic: no alignment at all (smallest code)
358 GCC_FALIGN
=$(call check_gcc
,-falign-functions
=1 -falign-jumps
=1 -falign-labels
=1 -falign-loops
=1,-malign-jumps
=1 -malign-loops
=1)
359 OPTIMIZATION
+=$(GCC_FALIGN
)
361 # Putting each function and data object into its own section
362 # allows for kbytes of less text if users link against static uclibc
363 # using ld --gc-sections.
364 # ld 2.18 can't do that (yet?) for shared libraries, so we itself
365 # do not use --gc-sections at shared lib link time.
366 # However, in combination with sections being sorted by alignment
367 # it does result in much reduced padding:
368 # text data bss dec hex
369 # 235319 1472 5992 242783 3b45f old.so
370 # 234104 1472 5980 241556 3af94 new.so
371 # Without -ffunction-sections, all functions will get aligned
372 # to 4 byte boundary by as/ld. This is arguably a bug in as.
373 # It specifies 4 byte align for .text even if not told to do so:
374 # Idx Name Size VMA LMA File off Algn
375 # 0 .text xxxxxxxx 00000000 00000000 xxxxxxxx 2**2 <===!
376 CPU_CFLAGS-y
+= $(CFLAG_-ffunction-sections
) $(CFLAG_-fdata-sections
)
377 CPU_LDFLAGS-y
+= $(CFLAG_-Wl--sort-common
)
378 $(eval
$(call check-ld-var
,--sort-section
=alignment
))
379 CPU_LDFLAGS-y
+= $(CFLAG_-Wl--sort-section
=alignment
)
385 ifeq ($(TARGET_ARCH
),sparc
)
386 CPU_CFLAGS-
$(CONFIG_SPARC_V7
)+=-mcpu
=v7
387 CPU_CFLAGS-
$(CONFIG_SPARC_V8
)+=-mcpu
=v8
388 CPU_CFLAGS-
$(CONFIG_SPARC_V9
)+=-mcpu
=v9
389 CPU_CFLAGS-
$(CONFIG_SPARC_V9B
)+=$(call check_gcc
,-mcpu
=v9b
,-mcpu
=ultrasparc
)
392 ifeq ($(TARGET_ARCH
),arm
)
393 CPU_CFLAGS-
$(ARCH_LITTLE_ENDIAN
)+=-mlittle-endian
394 CPU_CFLAGS-
$(ARCH_BIG_ENDIAN
)+=-mbig-endian
397 ifeq ($(TARGET_ARCH
),metag
)
399 CPU_CFLAGS-
$(CONFIG_META_1_2
)+=
400 CPU_CFLAGS-
$(CONFIG_META_2_1
)+=-Wa
,-mcpu
=metac21
403 ifeq ($(TARGET_ARCH
),mips
)
404 OPTIMIZATION
+=-mno-split-addresses
405 CPU_CFLAGS-
$(CONFIG_MIPS_N64_ABI
)+=-mabi
=64
406 CPU_CFLAGS-
$(CONFIG_MIPS_O32_ABI
)+=-mabi
=32
407 CPU_CFLAGS-
$(CONFIG_MIPS_N32_ABI
)+=-mabi
=n32
408 CPU_CFLAGS-
$(CONFIG_MIPS_NAN_LEGACY
)+=$(call check_gcc
,-mnan
=legacy
)
409 CPU_CFLAGS-
$(CONFIG_MIPS_NAN_2008
)+=$(call check_gcc
,-mnan
=2008)
410 CPU_LDFLAGS-y
+= $(CPU_CFLAGS
)
413 ifeq ($(TARGET_ARCH
),nds32
)
414 CPU_CFLAGS-
$(CONFIG_NDS32_ISA
)+=-march
=nds32
419 ifeq ($(TARGET_ARCH
),sh
)
420 $(eval
$(call check-gcc-var
,-mprefergot
))
421 OPTIMIZATION
+= $(CFLAG_-mprefergot
)
422 CPU_CFLAGS-
$(ARCH_LITTLE_ENDIAN
)+=-ml
423 CPU_CFLAGS-
$(ARCH_BIG_ENDIAN
)+=-mb
424 CPU_CFLAGS-
$(CONFIG_SH2
)+=-m2
425 CPU_CFLAGS-
$(CONFIG_SH3
)+=-m3
426 ifeq ($(UCLIBC_HAS_FPU
),y
)
427 CPU_CFLAGS-
$(CONFIG_SH2A
)+=-m2a
428 CPU_CFLAGS-
$(CONFIG_SH4
)+=-m4
429 CPU_CFLAGS-
$(CONFIG_SH4A
)+=-m4a
431 CPU_CFLAGS-
$(CONFIG_SH2A
)+=-m2a-nofpu
432 CPU_CFLAGS-
$(CONFIG_SH4
)+=-m4-nofpu
433 CPU_CFLAGS-
$(CONFIG_SH4A
)+=-m4a-nofpu
437 ifeq ($(TARGET_ARCH
),h8300
)
438 CPU_CFLAGS-
$(CONFIG_H8300H
) += -mh
-mint32
439 CPU_CFLAGS-
$(CONFIG_H8S
) += -ms
-mint32
442 ifeq ($(TARGET_ARCH
),cris
)
443 CPU_LDFLAGS-
$(CONFIG_CRIS
)+=-Wl
,-mcrislinux
444 CPU_LDFLAGS-
$(CONFIG_CRISV32
)+=-Wl
,-mcrislinux
445 CPU_CFLAGS-
$(CONFIG_CRIS
)+=-mlinux
450 ifeq ($(TARGET_ARCH
),csky
)
451 # In csky gas implement, we use $t and $d to detect .text or literal pool.
452 # So we couldn't strip them for objdump.
453 STRIP_FLAGS
+= -K
"$$"t
-K
"$$"d
455 CPU_CFLAGS-
$(ARCH_LITTLE_ENDIAN
) += -mlittle-endian
456 CPU_CFLAGS-
$(ARCH_BIG_ENDIAN
) += -mbig-endian
459 ifeq ($(TARGET_ARCH
),kvx
)
460 CPU_CFLAGS-
$(CONFIG_KVX
) += -march
=kvx
463 ifeq ($(TARGET_ARCH
),m68k
)
464 # -fPIC is only supported for 68020 and above. It is not supported
465 # for 68000, 68010, or Coldfire.
470 ifeq ($(TARGET_ARCH
),powerpc
)
471 # PowerPC can hold 8192 entries in its GOT with -fpic which is more than
472 # enough. Therefore use -fpic which will reduce code size and generates
476 PPC_HAS_REL16
:=$(shell printf
"\t.text\n\taddis 11,30,_GLOBAL_OFFSET_TABLE_-.@ha\n" |
$(CC
) -c
-x assembler
-o
/dev
/null
- 2> /dev
/null
&& echo
-n y || echo
-n n
)
477 PPC_HAS_SECUREPLT
:=$(shell $(CC
) --verbose
2>&1 | grep
-- --enable-secureplt
> /dev
/null
&& echo
-n y || echo
-n n
)
478 CPU_CFLAGS-
$(PPC_HAS_SECUREPLT
) += -DPPC_HAS_SECUREPLT
479 CPU_CFLAGS-
$(PPC_HAS_REL16
)+= -DHAVE_ASM_PPC_REL16
480 CPU_CFLAGS-
$(CONFIG_E500
) += "-D__NO_MATH_INLINES"
483 ifeq ($(TARGET_ARCH
),bfin
)
485 ifeq ($(UCLIBC_FORMAT_FDPIC_ELF
),y
)
486 CPU_CFLAGS-y
:=-mfdpic
487 CPU_LDFLAGS-y
+= -Wl
,-melf32bfinfd
491 ifeq ($(UCLIBC_FORMAT_SHARED_FLAT
),y
)
492 PICFLAG
:= -mleaf-id-shared-library
496 ifeq ($(TARGET_ARCH
),frv
)
497 # Using -pie causes the program to have an interpreter, which is
498 # forbidden, so we must make do with -shared. Unfortunately,
499 # -shared by itself would get us global function descriptors
500 # and calls through PLTs, dynamic resolution of symbols, etc,
501 # which would break as well, but -Bsymbolic comes to the rescue.
502 CPU_LDFLAGS-y
+= -Wl
,-melf32frvfd
-Wl
,-Bsymbolic
505 ifeq ($(strip $(TARGET_ARCH
)),avr32
)
506 CPU_CFLAGS-
$(CONFIG_AVR32_AP7
) += -march
=ap
507 CPU_CFLAGS-
$(CONFIG_LINKRELAX
) += -mrelax
508 CPU_LDFLAGS-
$(CONFIG_LINKRELAX
) += --relax
511 ifeq ($(TARGET_ARCH
),c6x
)
513 CPU_CFLAGS-
$(CONFIG_TMS320C64X
) += -march
=c64x
514 CPU_CFLAGS-
$(CONFIG_TMS320C64XPLUS
) += -march
=c64x
+
515 CPU_CFLAGS-
$(ARCH_LITTLE_ENDIAN
)+=-mlittle-endian
516 CPU_CFLAGS-
$(ARCH_BIG_ENDIAN
)+=-mbig-endian
517 CPU_LDFLAGS-y
+= $(CPU_CFLAGS
)
520 $(eval
$(call check-gcc-var
,$(PIEFLAG_NAME
)))
521 PIEFLAG
:= $(CFLAG_
$(PIEFLAG_NAME
))
523 PIEFLAG
:= $(PICFLAG
)
525 # We need to keep track of both the CC PIE flag (above) as
526 # well as the LD PIE flag (below) because we can't rely on
527 # gcc passing -pie if we used -fPIE. We need to directly use -pie
528 # instead of -Wl,-pie as gcc picks up the wrong startfile/endfile
529 $(eval
$(call cache-output-var
,LDPIEFLAG
,$(CC
) -Wl
$(comma
)--help
2>/dev
/null | grep
-q
-- -pie
&& echo
"-pie"))
531 # Check for --as-needed support in linker
532 ifndef LD_FLAG_ASNEEDED
533 _LD_FLAG_ASNEEDED
:=$(shell $(CC
) -Wl
,--help
2>/dev
/null | grep
-- --as-needed
)
534 ifneq ($(_LD_FLAG_ASNEEDED
),)
535 export LD_FLAG_ASNEEDED
:=--as-needed
538 ifndef LD_FLAG_NO_ASNEEDED
539 ifdef LD_FLAG_ASNEEDED
540 export LD_FLAG_NO_ASNEEDED
:=--no-as-needed
543 ifndef CC_FLAG_ASNEEDED
544 ifdef LD_FLAG_ASNEEDED
545 export CC_FLAG_ASNEEDED
:=-Wl
,$(LD_FLAG_ASNEEDED
)
548 ifndef CC_FLAG_NO_ASNEEDED
549 ifdef LD_FLAG_NO_ASNEEDED
550 export CC_FLAG_NO_ASNEEDED
:=-Wl
,$(LD_FLAG_NO_ASNEEDED
)
553 link.asneeded
= $(if
$(CC_FLAG_ASNEEDED
),$(if
$(CC_FLAG_NO_ASNEEDED
),$(CC_FLAG_ASNEEDED
) $(1) $(CC_FLAG_NO_ASNEEDED
)))
555 # Check for AS_NEEDED support in linker script (binutils>=2.16.1 has it)
557 export ASNEEDED
:=$(shell $(CC
) -Wl
,--help
2>/dev
/null | grep
-q
-- --as-needed
&& echo
"AS_NEEDED ( $(UCLIBC_LDSO) )" || echo
"$(UCLIBC_LDSO)")
560 # Add a bunch of extra pedantic annoyingly strict checks
561 WARNING_FLAGS
= -Wstrict-prototypes
-Wstrict-aliasing
-Wno-nonnull-compare
562 ifeq ($(EXTRA_WARNINGS
),y
)
565 -Wnodeclaration-after-statement \
568 -Wmissing-format-attribute \
569 -Wmissing-prototypes \
570 -Wmissing-declarations \
573 -Wold-style-declaration \
574 -Wold-style-definition \
578 WARNING_FLAGS
+= $(WARNING_FLAGS-gcc-
$(GCC_MAJOR_VER
))
579 $(foreach w
,$(WARNING_FLAGS
),$(eval
$(call check-gcc-var
,$(w
))))
580 XWARNINGS
= $(call qstrip
,$(WARNINGS
)) $(foreach w
,$(WARNING_FLAGS
),$(CFLAG_
$(w
)))
582 CPU_CFLAGS
=$(call qstrip
,$(CPU_CFLAGS-y
))
584 # Save the tested flag in a single variable and force it to be
585 # evaluated just once. Then use that computed value.
586 $(eval
$(call check-gcc-var
,-fno-stack-protector
))
587 SSP_DISABLE_FLAGS ?
= $(CFLAG_-fno-stack-protector
)
588 ifeq ($(UCLIBC_BUILD_SSP
),y
)
589 $(eval
$(call check-gcc-var
,-fno-stack-protector-all
))
590 $(eval
$(call check-gcc-var
,-fstack-protector
))
591 $(eval
$(call check-gcc-var
,-fstack-protector-all
))
592 SSP_CFLAGS
:= $(CFLAG_-fno-stack-protector-all
)
593 SSP_CFLAGS
+= $(CFLAG_-fstack-protector
)
594 SSP_ALL_CFLAGS ?
= $(CFLAG_-fstack-protector-all
)
596 SSP_CFLAGS
:= $(SSP_DISABLE_FLAGS
)
599 # Collect all CFLAGS components
600 CFLAGS
:= $(XWARNINGS
) $(CPU_CFLAGS
) $(SSP_CFLAGS
) \
601 -nostdinc
-I
$(top_builddir
)include \
602 -I
$(top_srcdir
)include -include libc-symbols.h \
603 -I
$(top_srcdir
)libc
/sysdeps
/linux
/$(TARGET_ARCH
) \
604 -I
$(top_srcdir
)libc
/sysdeps
/linux \
605 -I
$(top_srcdir
)ldso
/ldso
/$(TARGET_ARCH
) \
606 -I
$(top_srcdir
)ldso
/include -I.
608 # We need this to be checked within libc-symbols.h
609 ifneq ($(HAVE_SHARED
),y
)
613 $(eval
$(call check-ld-var
,--warn-once
))
614 $(eval
$(call check-ld-var
,--sort-common
))
615 $(eval
$(call check-ld-var
,--discard-all
))
616 LDFLAGS_NOSTRIP
:=$(LDFLAG-fuse-ld
) $(CPU_LDFLAGS-y
) -shared \
617 -Wl
,--warn-common
$(CFLAG_-Wl--warn-once
) -Wl
,-z
,combreloc
619 ifeq ($(UCLIBC_BUILD_RELRO
),y
)
620 LDFLAGS_NOSTRIP
+=-Wl
,-z
,relro
623 ifeq ($(UCLIBC_BUILD_NOW
),y
)
624 LDFLAGS_NOSTRIP
+=-Wl
,-z
,now
627 ifeq ($(LDSO_GNU_HASH_SUPPORT
),y
)
628 # Be sure that binutils support it
629 $(eval
$(call check-ld-var
,--hash-style
=gnu
))
630 ifeq ($(LDFLAG_--hash-style
=gnu
),)
631 ifneq ($(filter-out $(clean_targets
) CLEAN_
% install_headers headers-y
,$(MAKECMDGOALS
)),)
632 $(error Your binutils do not support
--hash-style option
, while you want to use it
)
635 LDFLAGS_NOSTRIP
+= $(CFLAG_-Wl--hash-style
=gnu
)
640 CFLAGS
+= -O0
-g3
-DDEBUG
642 CFLAGS
+= $(OPTIMIZATION
)
643 CFLAGS
+= $(OPTIMIZATION-
$(GCC_MAJOR_VER
))
644 CFLAGS
+= $(OPTIMIZATION-
$(GCC_MAJOR_VER
).
$(GCC_MINOR_VER
))
645 $(eval
$(call check-ld-var
,-O2
))
646 LDFLAGS_NOSTRIP
+= $(CFLAG_-Wl-O2
)
649 LDFLAGS
:=$(LDFLAGS_NOSTRIP
) -Wl
,-z
,defs
654 STRIPTOOL
:= true
-Stripping_disabled
657 ifneq ($(strip $(UCLIBC_EXTRA_CFLAGS
)),"")
658 CFLAGS
+= $(call qstrip
,$(UCLIBC_EXTRA_CFLAGS
))
660 ifneq ($(strip $(UCLIBC_EXTRA_LDFLAGS
)),"")
661 LDFLAGS
+= $(call qstrip
,$(UCLIBC_EXTRA_LDFLAGS
))
664 ifeq ($(UCLIBC_HAS_STDIO_FUTEXES
),y
)
665 CFLAGS
+= -D__USE_STDIO_FUTEXES__
668 ifeq ($(UCLIBC_HAS_THREADS
),y
)
669 ifeq ($(UCLIBC_HAS_THREADS_NATIVE
),y
)
671 CFLAGS
+= -DHAVE_FORCED_UNWIND
-D_LIBC_REENTRANT
673 ifeq ($(UCLIBC_HAS_LINUXTHREADS
),y
)
674 PTNAME
:= linuxthreads
677 PTDIR
:= libpthread
/$(PTNAME
)
678 # set up system dependencies include dirs (NOTE: order matters!)
679 ifeq ($(UCLIBC_HAS_THREADS_NATIVE
),y
)
680 PTINC
:= -I
$(top_builddir
)$(PTDIR
) \
681 -I
$(top_srcdir
)$(PTDIR
) \
682 $(if
$(TARGET_SUBARCH
),-I
$(top_srcdir
)$(PTDIR
)/sysdeps
/unix
/sysv
/linux
/$(TARGET_ARCH
)/$(TARGET_SUBARCH
)) \
683 -I
$(top_srcdir
)$(PTDIR
)/sysdeps
/unix
/sysv
/linux
/$(TARGET_ARCH
) \
684 -I
$(top_builddir
)$(PTDIR
)/sysdeps
/$(TARGET_ARCH
) \
685 -I
$(top_srcdir
)$(PTDIR
)/sysdeps
/$(TARGET_ARCH
) \
686 -I
$(top_builddir
)$(PTDIR
)/sysdeps
/unix
/sysv
/linux \
687 -I
$(top_srcdir
)$(PTDIR
)/sysdeps
/unix
/sysv
/linux \
688 -I
$(top_srcdir
)$(PTDIR
)/sysdeps
/pthread \
689 -I
$(top_srcdir
)$(PTDIR
)/sysdeps
/pthread
/bits \
690 -I
$(top_srcdir
)$(PTDIR
)/sysdeps
/generic
692 # Test for TLS if NPTL support was selected.
694 GCC_HAS_TLS
=$(shell \
695 echo
"extern __thread int foo;" |
$(CC
) -o
/dev
/null
-S
-xc
- 2>&1)
696 ifneq ($(GCC_HAS_TLS
),)
699 @echo
"#### Your compiler does not support TLS and you are trying to build uClibc-ng";
700 @echo
"#### with NPTL support. Upgrade your binutils and gcc to versions which";
701 @echo
"#### support TLS for your architecture. Do not contact uClibc-ng maintainers";
702 @echo
"#### about this problem.";
704 @echo
"#### Exiting...";
710 -I
$(top_srcdir
)$(PTDIR
)/sysdeps
/unix
/sysv
/linux
/$(TARGET_ARCH
) \
711 -I
$(top_srcdir
)$(PTDIR
)/sysdeps
/$(TARGET_ARCH
) \
712 -I
$(top_srcdir
)$(PTDIR
)/sysdeps
/unix
/sysv
/linux \
713 -I
$(top_srcdir
)$(PTDIR
)/sysdeps
/pthread \
714 -I
$(top_srcdir
)$(PTDIR
) \
715 -I
$(top_srcdir
)libpthread
722 CFLAGS
+= -I
$(top_srcdir
)libc
/sysdeps
/linux
/common
724 #CFLAGS += -iwithprefix include-fixed -iwithprefix include
725 $(eval
$(call cache-output-var
,CC_IPREFIX
,$(CC
) -print-file-name
=include))
726 CC_INC
:= -isystem
$(dir $(CC_IPREFIX
))include-fixed
-isystem
$(CC_IPREFIX
)
729 CFLAGS
+= -I
$(KERNEL_HEADERS
)
731 ifneq ($(DOASSERTS
),y
)
735 ifeq ($(SYMBOL_PREFIX
),_
)
736 CFLAGS
+=-D__UCLIBC_UNDERSCORES__
739 # Keep the check_as from being needlessly executed
740 ifeq ($(UCLIBC_BUILD_NOEXECSTACK
),y
)
741 $(eval
$(call check-as-var
,--noexecstack
))
743 ASFLAGS
+= $(ASFLAG_--noexecstack
)
745 LIBGCC_CFLAGS ?
= $(CFLAGS
) $(CPU_CFLAGS-y
)
746 $(eval
$(call cache-output-var
,LIBGCC_A
,$(CC
) $(LIBGCC_CFLAGS
) -print-libgcc-file-name
))
747 $(eval
$(call cache-output-var
,LIBGCC_EH
,$(CC
) $(LIBGCC_CFLAGS
) -print-file-name
=libgcc_eh.a
))
748 # with -O0 we (e.g. lockf) might end up with references to
749 # _Unwind_Resume, so pull in gcc_eh in this case..
750 # with a --disable-shared toolchain, libgcc_eh.a and libgcc.a are combined
751 # in libgcc.a, so check if the printed file exist, before adding to the commandline
752 LIBGCC_EH_FILE
:= $(shell if
[ -f
$(LIBGCC_EH
) ]; then echo
$(LIBGCC_EH
); fi
)
753 LIBGCC_DIR
:= $(dir $(LIBGCC_A
))
754 LIBGCC
:= $(LIBGCC_A
) $(if
$(DODEBUG
),$(LIBGCC_EH_FILE
))
756 # moved from libpthread/linuxthreads
757 ifeq ($(UCLIBC_CTOR_DTOR
),y
)
758 SHARED_START_FILES
:=$(top_builddir
)lib
/crti.o
$(LIBGCC_DIR
)crtbeginS.o
759 SHARED_END_FILES
:=$(LIBGCC_DIR
)crtendS.o
$(top_builddir
)lib
/crtn.o
762 LOCAL_INSTALL_PATH
:= $(if
$(O
),$(O
)/)install_dir
764 PTHREAD_GENERATE_MANGLE ?
= -n
"s/^.*@@@name@@@\([^@]*\)@@@value@@@[^0-9Xxa-fA-F-]*\([0-9Xxa-fA-F-][0-9Xxa-fA-F-]*\).*@@@end@@@.*\$$/\#define \1 \2/p"