include/configs/jupiter.h

   1 /*
   2  * (C) Copyright 2007
   3  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 #ifndef __CONFIG_H
  25 #define __CONFIG_H
  26
  27 /*
  28  * High Level Configuration Options
  29  * (easy to change)
  30  */
  31
  32 #define CONFIG_MPC5xxx          1       /* This is an MPC5xxx CPU */
  33 #define CONFIG_MPC5200          1       /* especially an MPC5200 */
  34 #define CONFIG_JUPITER          1       /* ... on Jupiter board */
  35
  36 #define CFG_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz */
  37
  38 #define CONFIG_BOARD_EARLY_INIT_R       1
  39 #define CONFIG_BOARD_EARLY_INIT_F       1
  40
  41 #define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH  */
  42 #define BOOTFLAG_WARM           0x02    /* Software reboot           */
  43
  44 /*
  45  * Serial console configuration
  46  */
  47 #define CONFIG_PSC_CONSOLE      1       /* console is on PSC1 */
  48 #define CONFIG_BAUDRATE         115200  /* ... at 115200 bps */
  49 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
  50
  51 /*
  52  * PCI Mapping:
  53  * 0x40000000 - 0x4fffffff - PCI Memory
  54  * 0x50000000 - 0x50ffffff - PCI IO Space
  55  */
  56 /*#define CONFIG_PCI            */
  57
  58 #if defined(CONFIG_PCI)
  59 #define CONFIG_PCI_PNP          1
  60 #define CONFIG_PCI_SCAN_SHOW    1
  61
  62 #define CONFIG_PCI_MEM_BUS      0x40000000
  63 #define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
  64 #define CONFIG_PCI_MEM_SIZE     0x10000000
  65
  66 #define CONFIG_PCI_IO_BUS       0x50000000
  67 #define CONFIG_PCI_IO_PHYS      CONFIG_PCI_IO_BUS
  68 #define CONFIG_PCI_IO_SIZE      0x01000000
  69 #endif
  70
  71 #define CFG_XLB_PIPELINING      1
  72
  73 #define CONFIG_NET_MULTI        1
  74 #define CONFIG_MII              1
  75 #define CFG_RX_ETH_BUFFER       8  /* use 8 rx buffer on eepro100  */
  76
  77 /* Partitions */
  78 #define CONFIG_MAC_PARTITION
  79 #define CONFIG_DOS_PARTITION
  80 #define CONFIG_ISO_PARTITION
  81
  82 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  83
  84
  85 /*
  86  * BOOTP options
  87  */
  88 #define CONFIG_BOOTP_BOOTFILESIZE
  89 #define CONFIG_BOOTP_BOOTPATH
  90 #define CONFIG_BOOTP_GATEWAY
  91 #define CONFIG_BOOTP_HOSTNAME
  92
  93
  94 /*
  95  * Command line configuration.
  96  */
  97 #include <config_cmd_default.h>
  98
  99 #define CONFIG_CMD_NFS
 100 #define CONFIG_CMD_SNTP
 101
 102 #if defined(CONFIG_PCI)
 103 #define CODFIG_CMD_PCI
 104 #endif
 105
 106
 107 /*
 108  * Autobooting
 109  */
 110 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds */
 111
 112 #define CONFIG_PREBOOT  "echo;" \
 113         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 114         "echo"
 115
 116 #undef  CONFIG_BOOTARGS
 117
 118 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 119         "netdev=eth0\0"                                                 \
 120         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 121                 "nfsroot=${serverip}:${rootpath}\0"                     \
 122         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 123         "addip=setenv bootargs ${bootargs} "                            \
 124                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 125                 ":${hostname}:${netdev}:off panic=1\0"                  \
 126         "flash_nfs=run nfsargs addip addcons;"                          \
 127                 "bootm ${kernel_addr}\0"                                \
 128         "flash_self=run ramargs addip;"                                 \
 129                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 130         "addcons=setenv bootargs ${bootargs} console=${contyp},"        \
 131                 "${baudrate}\0"                                         \
 132         "contyp=ttyS0\0"                                                \
 133         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;"    \
 134                 "bootm\0"                                               \
 135         "rootpath=/opt/eldk/ppc_6xx\0"                                  \
 136         "bootfile=/tftpboot/jupiter/uImage\0"                           \
 137         ""
 138
 139 #define CONFIG_BOOTCOMMAND      "run flash_self"
 140
 141 /*
 142  * IPB Bus clocking configuration.
 143  */
 144 #undef CFG_IPBSPEED_133         /* define for 133MHz speed */
 145
 146 #if 0
 147 /* pass open firmware flat tree */
 148 #define CONFIG_OF_LIBFDT        1
 149 #define CONFIG_OF_BOARD_SETUP   1
 150
 151 #define OF_CPU                  "PowerPC,5200@0"
 152 #define OF_SOC                  "soc5200@f0000000"
 153 #define OF_TBCLK                (bd->bi_busfreq / 8)
 154 #define OF_STDOUT_PATH          "/soc5200@f0000000/serial@2000"
 155 #endif
 156
 157 #if 0
 158 /*
 159  * I2C configuration
 160  */
 161 #define CONFIG_HARD_I2C         1       /* I2C with hardware support */
 162 #define CFG_I2C_MODULE          2       /* Select I2C module #1 or #2 */
 163
 164 #define CFG_I2C_SPEED           100000 /* 100 kHz */
 165 #define CFG_I2C_SLAVE           0x7F
 166
 167 /*
 168  * EEPROM configuration
 169  */
 170 #define CFG_I2C_EEPROM_ADDR             0x50    /* 1010000x */
 171 #define CFG_I2C_EEPROM_ADDR_LEN         1
 172 #define CFG_EEPROM_PAGE_WRITE_BITS      3
 173 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS  70
 174 #endif
 175
 176 /*
 177  * Flash configuration
 178  */
 179 #define CFG_FLASH_BASE          0xFF000000
 180 #define CFG_FLASH_SIZE          0x01000000
 181
 182 #define CFG_MAX_FLASH_SECT      128     /* max num of sects on one chip */
 183
 184 #define CFG_ENV_ADDR            (TEXT_BASE + 0x40000) /* third sector */
 185
 186 #define CFG_FLASH_ERASE_TOUT    240000  /* Flash Erase Timeout (in ms)  */
 187 #define CFG_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (in ms)  */
 188
 189 #define CFG_MAX_FLASH_BANKS     1       /* max num of flash banks */
 190
 191 #define CFG_FLASH_CFI_DRIVER
 192 #define CFG_FLASH_CFI
 193 #define CFG_FLASH_EMPTY_INFO
 194 #define CFG_FLASH_CFI_WIDTH     FLASH_CFI_8BIT
 195 #define CFG_UPDATE_FLASH_SIZE   1
 196 #define CFG_FLASH_USE_BUFFER_WRITE      1
 197
 198 /*
 199  * Environment settings
 200  */
 201 #define CFG_ENV_IS_IN_FLASH     1
 202 #define CFG_ENV_SIZE            0x20000
 203 #define CFG_ENV_SECT_SIZE       0x20000
 204 #define CONFIG_ENV_OVERWRITE    1
 205
 206 /* Address and size of Redundant Environment Sector     */
 207 #define CFG_ENV_ADDR_REDUND     (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
 208 #define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
 209
 210 /*
 211  * Memory map
 212  */
 213 #define CFG_MBAR                0xF0000000
 214 #define CFG_SDRAM_BASE          0x00000000
 215 #define CFG_DEFAULT_MBAR        0x80000000
 216
 217 /* Use SRAM until RAM will be available */
 218 #define CFG_INIT_RAM_ADDR       MPC5XXX_SRAM
 219 #define CFG_INIT_RAM_END        MPC5XXX_SRAM_SIZE       /* End of used area in DPRAM */
 220
 221
 222 #define CFG_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
 223 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 224 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 225
 226 #define CFG_MONITOR_BASE    TEXT_BASE
 227 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 228 #   define CFG_RAMBOOT          1
 229 #endif
 230
 231 #define CFG_MONITOR_LEN         (192 << 10)     /* Reserve 192 kB for Monitor   */
 232 #define CFG_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc()  */
 233 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 234
 235 /*
 236  * Ethernet configuration
 237  */
 238 #define CONFIG_MPC5xxx_FEC      1
 239 /*
 240  * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
 241  */
 242 /* #define CONFIG_FEC_10MBIT 1 */
 243 #define CONFIG_PHY_ADDR         0x00
 244
 245 /*
 246  * GPIO configuration
 247  */
 248 #define CFG_GPS_PORT_CONFIG     0x10000004
 249
 250 /*
 251  * Miscellaneous configurable options
 252  */
 253 #define CFG_LONGHELP                    /* undef to save memory     */
 254 #define CFG_PROMPT              "=> "   /* Monitor Command Prompt   */
 255
 256 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 257 #define CFG_HUSH_PARSER         1       /* Use the HUSH parser          */
 258 #ifdef  CFG_HUSH_PARSER
 259 #define CFG_PROMPT_HUSH_PS2     "> "
 260 #endif
 261 #if defined(CONFIG_CMD_KGDB)
 262 #define CFG_CBSIZE              1024    /* Console I/O Buffer Size  */
 263 #else
 264 #define CFG_CBSIZE              256     /* Console I/O Buffer Size  */
 265 #endif
 266 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)   /* Print Buffer Size */
 267 #define CFG_MAXARGS             16              /* max number of command args   */
 268 #define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
 269
 270 #define CFG_MEMTEST_START       0x00100000      /* memtest works on */
 271 #define CFG_MEMTEST_END         0x00f00000      /* 1 ... 15 MB in DRAM  */
 272 #define CFG_ALT_MEMTEST         1
 273
 274 #define CFG_LOAD_ADDR           0x200000        /* default load address */
 275
 276 #define CFG_HZ                  1000    /* decrementer freq: 1 ms ticks */
 277
 278 #define CFG_CACHELINE_SIZE      32      /* For MPC5xxx CPUs */
 279 #if defined(CONFIG_CMD_KGDB)
 280 #  define CFG_CACHELINE_SHIFT   5       /* log base 2 of the above value */
 281 #endif
 282
 283 /*
 284  * Various low-level settings
 285  */
 286 #define CFG_HID0_INIT           HID0_ICE | HID0_ICFI
 287 #define CFG_HID0_FINAL          HID0_ICE
 288
 289 #define CFG_BOOTCS_START        CFG_FLASH_BASE
 290 #define CFG_BOOTCS_SIZE         CFG_FLASH_SIZE
 291 #define CFG_BOOTCS_CFG          0x00047801
 292 #define CFG_CS0_START           CFG_FLASH_BASE
 293 #define CFG_CS0_SIZE            CFG_FLASH_SIZE
 294
 295 #define CFG_CS_BURST            0x00000000
 296 #define CFG_CS_DEADCYCLE        0x33333333
 297
 298 #define CFG_RESET_ADDRESS       0xff000000
 299
 300 #endif /* __CONFIG_H */