cpu/blackfin/interrupts.c

   1 /*
   2  * U-boot - interrupts.c Interrupt related routines
   3  *
   4  * Copyright (c) 2005-2008 Analog Devices Inc.
   5  *
   6  * This file is based on interrupts.c
   7  * Copyright 1996 Roman Zippel
   8  * Copyright 1999 D. Jeff Dionne <jeff@uclinux.org>
   9  * Copyright 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
  10  * Copyright 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
  11  * Copyright 2003 Metrowerks/Motorola
  12  * Copyright 2003 Bas Vermeulen <bas@buyways.nl>,
  13  *                      BuyWays B.V. (www.buyways.nl)
  14  *
  15  * (C) Copyright 2000-2004
  16  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  17  *
  18  * Licensed under the GPL-2 or later.
  19  */
  20
  21 #include <common.h>
  22 #include <config.h>
  23 #include <asm/blackfin.h>
  24 #include "cpu.h"
  25
  26 static ulong timestamp;
  27 static ulong last_time;
  28 static int int_flag;
  29
  30 int irq_flags;                  /* needed by asm-blackfin/system.h */
  31
  32 /* Functions just to satisfy the linker */
  33
  34 /*
  35  * This function is derived from PowerPC code (read timebase as long long).
  36  * On Blackfin it just returns the timer value.
  37  */
  38 unsigned long long get_ticks(void)
  39 {
  40         return get_timer(0);
  41 }
  42
  43 /*
  44  * This function is derived from PowerPC code (timebase clock frequency).
  45  * On Blackfin it returns the number of timer ticks per second.
  46  */
  47 ulong get_tbclk(void)
  48 {
  49         ulong tbclk;
  50
  51         tbclk = CFG_HZ;
  52         return tbclk;
  53 }
  54
  55 void enable_interrupts(void)
  56 {
  57         local_irq_restore(int_flag);
  58 }
  59
  60 int disable_interrupts(void)
  61 {
  62         local_irq_save(int_flag);
  63         return 1;
  64 }
  65
  66 void udelay(unsigned long usec)
  67 {
  68         unsigned long delay, start, stop;
  69         unsigned long cclk;
  70         cclk = (CONFIG_CCLK_HZ);
  71
  72         while (usec > 1) {
  73                 /*
  74                  * how many clock ticks to delay?
  75                  *  - request(in useconds) * clock_ticks(Hz) / useconds/second
  76                  */
  77                 if (usec < 1000) {
  78                         delay = (usec * (cclk / 244)) >> 12;
  79                         usec = 0;
  80                 } else {
  81                         delay = (1000 * (cclk / 244)) >> 12;
  82                         usec -= 1000;
  83                 }
  84
  85                 asm volatile (" %0 = CYCLES;" : "=r" (start));
  86                 do {
  87                         asm volatile (" %0 = CYCLES; " : "=r" (stop));
  88                 } while (stop - start < delay);
  89         }
  90
  91         return;
  92 }
  93
  94 #define MAX_TIM_LOAD    0xFFFFFFFF
  95 int timer_init(void)
  96 {
  97         *pTCNTL = 0x1;
  98         *pTSCALE = 0x0;
  99         *pTCOUNT = MAX_TIM_LOAD;
 100         *pTPERIOD = MAX_TIM_LOAD;
 101         *pTCNTL = 0x7;
 102         asm("CSYNC;");
 103
 104         timestamp = 0;
 105         last_time = 0;
 106
 107         return 0;
 108 }
 109
 110 /*
 111  * Any network command or flash
 112  * command is started get_timer shall
 113  * be called before TCOUNT gets reset,
 114  * to implement the accurate timeouts.
 115  *
 116  * How ever milliconds doesn't return
 117  * the number that has been elapsed from
 118  * the last reset.
 119  *
 120  * As get_timer is used in the u-boot
 121  * only for timeouts this should be
 122  * sufficient
 123  */
 124 ulong get_timer(ulong base)
 125 {
 126         ulong milisec;
 127
 128         /* Number of clocks elapsed */
 129         ulong clocks = (MAX_TIM_LOAD - (*pTCOUNT));
 130
 131         /*
 132          * Find if the TCOUNT is reset
 133          * timestamp gives the number of times
 134          * TCOUNT got reset
 135          */
 136         if (clocks < last_time)
 137                 timestamp++;
 138         last_time = clocks;
 139
 140         /* Get the number of milliseconds */
 141         milisec = clocks / (CONFIG_CCLK_HZ / 1000);
 142
 143         /*
 144          * Find the number of millisonds that
 145          * got elapsed before this TCOUNT cycle
 146          */
 147         milisec += timestamp * (MAX_TIM_LOAD / (CONFIG_CCLK_HZ / 1000));
 148
 149         return (milisec - base);
 150 }
 151
 152 void reset_timer(void)
 153 {
 154         timestamp = 0;
 155 }