include/configs/taishan.h

   1 /*
   2  * (C) Copyright 2007
   3  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   4  *
   5  * This program is free software; you can redistribute it and/or
   6  * modify it under the terms of the GNU General Public License as
   7  * published by the Free Software Foundation; either version 2 of
   8  * the License, or (at your option) any later version.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  * You should have received a copy of the GNU General Public License
  16  * along with this program; if not, write to the Free Software
  17  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  18  * MA 02111-1307 USA
  19  */
  20
  21 /************************************************************************
  22  * TAISHAN.h - configuration for AMCC 440GX Ref
  23  ***********************************************************************/
  24
  25 #ifndef __CONFIG_H
  26 #define __CONFIG_H
  27
  28 /*-----------------------------------------------------------------------
  29  * High Level Configuration Options
  30  *----------------------------------------------------------------------*/
  31 #define CONFIG_TAISHAN          1       /* Board is taishan             */
  32 #define CONFIG_440GX            1       /* Specifc GX support           */
  33 #define CONFIG_440              1       /* ... PPC440 family            */
  34 #define CONFIG_4xx              1       /* ... PPC4xx family            */
  35 #undef  CFG_DRAM_TEST                   /* Disable-takes long time!     */
  36 #define CONFIG_SYS_CLK_FREQ     33333333 /* external freq to pll        */
  37
  38 #define CONFIG_BOARD_EARLY_INIT_F 1     /* Call board_pre_init          */
  39 #define CONFIG_MISC_INIT_R      1       /* Call misc_init_r             */
  40
  41 /*-----------------------------------------------------------------------
  42  * Base addresses -- Note these are effective addresses where the
  43  * actual resources get mapped (not physical addresses)
  44  *----------------------------------------------------------------------*/
  45 #define CFG_SDRAM_BASE          0x00000000      /* _must_ be 0          */
  46 #define CFG_FLASH_BASE          0xfc000000      /* start of FLASH       */
  47 #define CFG_MONITOR_BASE        0xfffc0000      /* start of monitor     */
  48 #define CFG_PCI_MEMBASE         0x80000000      /* mapped pci memory    */
  49 #define CFG_PERIPHERAL_BASE     0xe0000000      /* internal peripherals */
  50 #define CFG_ISRAM_BASE          0xc0000000      /* internal SRAM        */
  51 #define CFG_PCI_BASE            0xd0000000      /* internal PCI regs    */
  52
  53 #define CFG_EBC0_FLASH_BASE     CFG_FLASH_BASE
  54 #define CFG_EBC1_FPGA_BASE      (CFG_PERIPHERAL_BASE + 0x01000000)
  55 #define CFG_EBC2_LCM_BASE       (CFG_PERIPHERAL_BASE + 0x02000000)
  56 #define CFG_EBC3_CONN_BASE      (CFG_PERIPHERAL_BASE + 0x08000000)
  57
  58 #define CFG_GPIO_BASE           (CFG_PERIPHERAL_BASE + 0x00000700)
  59
  60 /*-----------------------------------------------------------------------
  61  * Initial RAM & stack pointer (placed in internal SRAM)
  62  *----------------------------------------------------------------------*/
  63 #define CFG_TEMP_STACK_OCM      1
  64 #define CFG_OCM_DATA_ADDR       CFG_ISRAM_BASE
  65 #define CFG_INIT_RAM_ADDR       CFG_ISRAM_BASE  /* Initial RAM address  */
  66 #define CFG_INIT_RAM_END        0x2000          /* End of used area in RAM*/
  67 #define CFG_GBL_DATA_SIZE       128             /* num bytes initial data*/
  68
  69 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
  70 #define CFG_POST_WORD_ADDR      (CFG_GBL_DATA_OFFSET - 0x4)
  71 #define CFG_INIT_SP_OFFSET      CFG_POST_WORD_ADDR
  72
  73 #define CFG_MONITOR_LEN         (256 * 1024)    /* Reserve 256 kB for Mon*/
  74 #define CFG_MALLOC_LEN          (1024 * 1024)   /* Reserve 1024 kB for malloc*/
  75
  76 /*-----------------------------------------------------------------------
  77  * Serial Port
  78  *----------------------------------------------------------------------*/
  79 #define CONFIG_UART1_CONSOLE    1       /* use of UART1 as console      */
  80 #define CONFIG_SERIAL_MULTI     1       /* enable serial multi support  */
  81 #define CFG_EXT_SERIAL_CLOCK    (1843200 * 6)   /* Ext clk @ 11.059 MHz */
  82 #define CONFIG_BAUDRATE         115200
  83
  84 #define CFG_BAUDRATE_TABLE  \
  85     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
  86
  87 /*-----------------------------------------------------------------------
  88  * Environment
  89  *----------------------------------------------------------------------*/
  90 #define CFG_ENV_IS_IN_FLASH     1       /* use FLASH for environment vars       */
  91
  92 /*-----------------------------------------------------------------------
  93  * FLASH related
  94  *----------------------------------------------------------------------*/
  95 #define CFG_FLASH_CFI
  96 #define CFG_FLASH_CFI_DRIVER
  97 #define CFG_FLASH_EMPTY_INFO            /* print 'E' for empty sector on flinfo */
  98 #define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)     */
  99
 100 #define CFG_FLASH_BANKS_LIST    {CFG_FLASH_BASE}
 101 #define CFG_MAX_FLASH_BANKS     1                   /* number of banks      */
 102 #define CFG_MAX_FLASH_SECT      1024                /* sectors per device   */
 103
 104 #undef  CFG_FLASH_CHECKSUM
 105 #define CFG_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)      */
 106 #define CFG_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms)      */
 107
 108 #define CFG_ENV_SECT_SIZE       0x40000 /* size of one complete sector  */
 109 #define CFG_ENV_ADDR            (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
 110 #define CFG_ENV_SIZE            0x4000  /* Total Size of Environment Sector     */
 111
 112 /* Address and size of Redundant Environment Sector     */
 113 #define CFG_ENV_ADDR_REDUND     (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
 114 #define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
 115
 116 /*-----------------------------------------------------------------------
 117  * E2PROM bootstrap configure value
 118  *----------------------------------------------------------------------*/
 119
 120 /*
 121  * 800/133/66
 122  * IIC 0~15: 86 78 11 6a 61 A7 04 62 00 00 00 00 00 00 00 00
 123  */
 124
 125 /*
 126  * 800/160/80
 127  * IIC 0~15: 86 78 c1 a6 09 67 04 63 00 00 00 00 00 00 00 00
 128  */
 129
 130 /*-----------------------------------------------------------------------
 131  * DDR SDRAM
 132  *----------------------------------------------------------------------*/
 133 #undef CONFIG_SPD_EEPROM                /* Don't use SPD EEPROM for setup       */
 134 #define CONFIG_SDRAM_BANK0      1       /* init onboard DDR SDRAM bank 0        */
 135 #define CFG_SDRAM0_TR0          0xC10A401A
 136 #undef CONFIG_SDRAM_ECC                 /* enable ECC support                   */
 137
 138 /*-----------------------------------------------------------------------
 139  * I2C
 140  *----------------------------------------------------------------------*/
 141 #define CONFIG_HARD_I2C         1       /* I2C with hardware support    */
 142 #undef  CONFIG_SOFT_I2C                 /* I2C bit-banged               */
 143 #define CFG_I2C_SPEED           400000  /* I2C speed and slave address  */
 144 #define CFG_I2C_SLAVE           0x7F
 145
 146 #undef CFG_I2C_MULTI_EEPROMS
 147 #define CFG_I2C_EEPROM_ADDR     0x50
 148 #define CFG_I2C_EEPROM_ADDR_LEN 1
 149 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 150 #define CFG_EEPROM_PAGE_WRITE_BITS 3
 151 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
 152
 153 #define CFG_BOOTSTRAP_IIC_ADDR  0x50
 154
 155 /* I2C SYSMON (LM75, AD7414 is almost compatible)                       */
 156 #define CONFIG_DTT_LM75         1               /* ON Semi's LM75       */
 157 #define CONFIG_DTT_SENSORS      {0}             /* Sensor addresses     */
 158 #define CFG_DTT_MAX_TEMP        70
 159 #define CFG_DTT_LOW_TEMP        -30
 160 #define CFG_DTT_HYSTERESIS      3
 161
 162 /*-----------------------------------------------------------------------
 163  * Environment
 164  *----------------------------------------------------------------------*/
 165
 166 #define CONFIG_PREBOOT  "echo;" \
 167         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 168         "echo"
 169
 170 #undef  CONFIG_BOOTARGS
 171
 172 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 173         "netdev=eth0\0"                                                 \
 174         "hostname=taishan\0"                                            \
 175         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 176                 "nfsroot=${serverip}:${rootpath}\0"                     \
 177         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 178         "addip=setenv bootargs ${bootargs} "                            \
 179                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 180                 ":${hostname}:${netdev}:off panic=1\0"                  \
 181         "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\
 182         "flash_nfs=run nfsargs addip addtty;"                           \
 183                 "bootm ${kernel_addr}\0"                                \
 184         "flash_self=run ramargs addip addtty;"                          \
 185                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 186         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
 187                 "bootm\0"                                               \
 188         "rootpath=/opt/eldk/ppc_4xx\0"                                  \
 189         "bootfile=/tftpboot/taishan/uImage\0"                           \
 190         "kernel_addr=fc000000\0"                                        \
 191         "ramdisk_addr=fc180000\0"                                       \
 192         "initrd_high=30000000\0"                                        \
 193         "load=tftp 100000 /tftpboot/taishan/u-boot.bin\0"               \
 194         "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"   \
 195                 "cp.b 100000 fffc0000 40000;"                           \
 196                 "setenv filesize;saveenv\0"                             \
 197         "upd=run load update\0"                                         \
 198         "fixedip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \
 199         "$(gatewayip):$(netmask):$(hostname):$(netdev):off panic=1\0"   \
 200         "dhcp=setenv bootargs $(bootargs) ip=dhcp\0"                    \
 201         "kozio=bootm 0xffe00000\0"                                      \
 202         ""
 203 #define CONFIG_BOOTCOMMAND      "run flash_self"
 204
 205 #if 0
 206 #define CONFIG_BOOTDELAY        -1      /* autoboot disabled            */
 207 #else
 208 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
 209 #endif
 210
 211 #define CONFIG_BAUDRATE         115200
 212 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
 213 #define CFG_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 214
 215 /*-----------------------------------------------------------------------
 216  * Networking
 217  *----------------------------------------------------------------------*/
 218 #define CONFIG_EMAC_NR_START    2       /* start with EMAC 2 (skip 0&1) */
 219 #define CONFIG_MII              1       /* MII PHY management           */
 220 #define CONFIG_NET_MULTI        1
 221 #define CONFIG_PHY_ADDR         0xff         /* no phy on EMAC0         */
 222 #define CONFIG_PHY1_ADDR        0xff         /* no phy on EMAC1         */
 223 #define CONFIG_PHY2_ADDR        0x1
 224 #define CONFIG_PHY3_ADDR        0x3
 225 #define CONFIG_ET1011C_PHY      1
 226 #define CONFIG_HAS_ETH0
 227 #define CONFIG_HAS_ETH1
 228 #define CONFIG_HAS_ETH2
 229 #define CONFIG_HAS_ETH3
 230 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 231 #define CONFIG_PHY_RESET        1       /* reset phy upon startup         */
 232 #define CONFIG_PHY_RESET_DELAY  1000
 233 #define CFG_RX_ETH_BUFFER       32      /* Number of ethernet rx buffers & descriptors */
 234
 235 #define CONFIG_NETCONSOLE               /* include NetConsole support   */
 236
 237
 238 /*
 239  * BOOTP options
 240  */
 241 #define CONFIG_BOOTP_BOOTFILESIZE
 242 #define CONFIG_BOOTP_BOOTPATH
 243 #define CONFIG_BOOTP_GATEWAY
 244 #define CONFIG_BOOTP_HOSTNAME
 245
 246
 247 /*
 248  * Command line configuration.
 249  */
 250 #include <config_cmd_default.h>
 251
 252 #define CONFIG_CMD_ASKENV
 253 #define CONFIG_CMD_DHCP
 254 #define CONFIG_CMD_DIAG
 255 #define CONFIG_CMD_DTT
 256 #define CONFIG_CMD_ELF
 257 #define CONFIG_CMD_EEPROM
 258 #define CONFIG_CMD_I2C
 259 #define CONFIG_CMD_IRQ
 260 #define CONFIG_CMD_MII
 261 #define CONFIG_CMD_NET
 262 #define CONFIG_CMD_NFS
 263 #define CONFIG_CMD_PCI
 264 #define CONFIG_CMD_PING
 265 #define CONFIG_CMD_REGINFO
 266
 267
 268 #undef CONFIG_WATCHDOG                  /* watchdog disabled            */
 269
 270 /*-----------------------------------------------------------------------
 271  * Miscellaneous configurable options
 272  *----------------------------------------------------------------------*/
 273 #define CFG_LONGHELP                    /* undef to save memory         */
 274 #define CFG_PROMPT              "=> "   /* Monitor Command Prompt       */
 275 #if defined(CONFIG_CMD_KGDB)
 276 #define CFG_CBSIZE              1024    /* Console I/O Buffer Size      */
 277 #else
 278 #define CFG_CBSIZE              256     /* Console I/O Buffer Size      */
 279 #endif
 280 #define CFG_PBSIZE              (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 281 #define CFG_MAXARGS             16      /* max number of command args   */
 282 #define CFG_BARGSIZE            CFG_CBSIZE /* Boot Argument Buffer Size */
 283
 284 #define CFG_MEMTEST_START       0x0400000 /* memtest works on           */
 285 #define CFG_MEMTEST_END         0x0C00000 /* 4 ... 12 MB in DRAM        */
 286
 287 #define CFG_LOAD_ADDR           0x100000  /* default load address       */
 288 #define CFG_EXTBDINFO           1       /* To use extended board_into (bd_t) */
 289
 290 #define CFG_HZ                  1000    /* decrementer freq: 1 ms ticks */
 291
 292 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 293 #define CONFIG_LOOPW            1       /* enable loopw command         */
 294 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 295 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
 296 #define CONFIG_VERSION_VARIABLE 1       /* include version env variable */
 297
 298 /*-----------------------------------------------------------------------
 299  * PCI stuff
 300  *-----------------------------------------------------------------------
 301  */
 302 /* General PCI */
 303 #define CONFIG_PCI                      /* include pci support          */
 304 #define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
 305 #define CONFIG_EEPRO100       1         /* include PCI EEPRO100         */
 306 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
 307 #define CFG_PCI_TARGBASE    0x80000000  /* PCIaddr mapped to CFG_PCI_MEMBASE */
 308
 309 /* Board-specific PCI */
 310 #define CFG_PCI_TARGET_INIT             /* let board init pci target    */
 311
 312 #define CFG_PCI_SUBSYS_VENDORID 0x10e8  /* AMCC */
 313 #define CFG_PCI_SUBSYS_DEVICEID 0xcafe  /* Whatever */
 314
 315 /*
 316  * For booting Linux, the board info and command line data
 317  * have to be in the first 8 MB of memory, since this is
 318  * the maximum mapped by the Linux kernel during initialization.
 319  */
 320 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 321
 322 /*
 323  * Internal Definitions
 324  *
 325  * Boot Flags
 326  */
 327 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 328 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 329
 330 #if defined(CONFIG_CMD_KGDB)
 331 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 332 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use */
 333 #endif
 334 #endif  /* __CONFIG_H */