include/configs/TQM823L.h

   1 /*
   2  * (C) Copyright 2000-2005
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /*
  32  * High Level Configuration Options
  33  * (easy to change)
  34  */
  35
  36 #define CONFIG_MPC823           1       /* This is a MPC823 CPU         */
  37 #define CONFIG_TQM823L          1       /* ...on a TQM8xxL module       */
  38
  39 #ifdef  CONFIG_LCD                      /* with LCD controller ?        */
  40 #define CONFIG_SPLASH_SCREEN            /* ... with splashscreen support*/
  41 #endif
  42
  43 #define CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
  44 #undef  CONFIG_8xx_CONS_SMC2
  45 #undef  CONFIG_8xx_CONS_NONE
  46 #define CONFIG_BAUDRATE         115200  /* console baudrate = 115kbps   */
  47
  48 #define CONFIG_BOOTCOUNT_LIMIT
  49
  50 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  51
  52 #define CONFIG_BOARD_TYPES      1       /* support board types          */
  53
  54 #define CONFIG_PREBOOT  "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
  55
  56 #undef  CONFIG_BOOTARGS
  57
  58 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  59         "netdev=eth0\0"                                                 \
  60         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
  61                 "nfsroot=${serverip}:${rootpath}\0"                     \
  62         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
  63         "addip=setenv bootargs ${bootargs} "                            \
  64                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
  65                 ":${hostname}:${netdev}:off panic=1\0"                  \
  66         "flash_nfs=run nfsargs addip;"                                  \
  67                 "bootm ${kernel_addr}\0"                                \
  68         "flash_self=run ramargs addip;"                                 \
  69                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
  70         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
  71         "rootpath=/opt/eldk/ppc_8xx\0"                                  \
  72         "bootfile=/tftpboot/TQM823L/uImage\0"                           \
  73         "fdt_addr=40040000\0"                                           \
  74         "kernel_addr=40060000\0"                                        \
  75         "ramdisk_addr=40200000\0"                                       \
  76         ""
  77 #define CONFIG_BOOTCOMMAND      "run flash_self"
  78
  79 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  80 #undef  CFG_LOADS_BAUD_CHANGE           /* don't allow baudrate change  */
  81
  82 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  83
  84 #if defined(CONFIG_LCD)
  85 # undef  CONFIG_STATUS_LED              /* disturbs display             */
  86 #else
  87 # define CONFIG_STATUS_LED      1       /* Status LED enabled           */
  88 #endif  /* CONFIG_LCD */
  89
  90 #undef  CONFIG_CAN_DRIVER               /* CAN Driver support disabled  */
  91
  92 /*
  93  * BOOTP options
  94  */
  95 #define CONFIG_BOOTP_SUBNETMASK
  96 #define CONFIG_BOOTP_GATEWAY
  97 #define CONFIG_BOOTP_HOSTNAME
  98 #define CONFIG_BOOTP_BOOTPATH
  99 #define CONFIG_BOOTP_BOOTFILESIZE
 100
 101
 102 #define CONFIG_MAC_PARTITION
 103 #define CONFIG_DOS_PARTITION
 104
 105 #define CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
 106
 107
 108 /*
 109  * Command line configuration.
 110  */
 111 #include <config_cmd_default.h>
 112
 113 #define CONFIG_CMD_ASKENV
 114 #define CONFIG_CMD_DATE
 115 #define CONFIG_CMD_DHCP
 116 #define CONFIG_CMD_IDE
 117 #define CONFIG_CMD_NFS
 118 #define CONFIG_CMD_SNTP
 119
 120 #ifdef  CONFIG_SPLASH_SCREEN
 121     #define CONFIG_CMD_BMP
 122 #endif
 123
 124
 125 /*
 126  * Miscellaneous configurable options
 127  */
 128 #define CFG_LONGHELP                    /* undef to save memory         */
 129 #define CFG_PROMPT              "=> "   /* Monitor Command Prompt       */
 130
 131 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 132 #define CFG_HUSH_PARSER         1       /* Use the HUSH parser          */
 133 #ifdef  CFG_HUSH_PARSER
 134 #define CFG_PROMPT_HUSH_PS2     "> "
 135 #endif
 136
 137 #if defined(CONFIG_CMD_KGDB)
 138 #define CFG_CBSIZE              1024    /* Console I/O Buffer Size      */
 139 #else
 140 #define CFG_CBSIZE              256     /* Console I/O Buffer Size      */
 141 #endif
 142 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 143 #define CFG_MAXARGS             16      /* max number of command args   */
 144 #define CFG_BARGSIZE    CFG_CBSIZE      /* Boot Argument Buffer Size    */
 145
 146 #define CFG_MEMTEST_START       0x0400000       /* memtest works on     */
 147 #define CFG_MEMTEST_END         0x0C00000       /* 4 ... 12 MB in DRAM  */
 148
 149 #define CFG_LOAD_ADDR           0x100000        /* default load address */
 150
 151 #define CFG_HZ                  1000    /* decrementer freq: 1 ms ticks */
 152
 153 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 154
 155 /*
 156  * Low Level Configuration Settings
 157  * (address mappings, register initial values, etc.)
 158  * You should know what you are doing if you make changes here.
 159  */
 160 /*-----------------------------------------------------------------------
 161  * Internal Memory Mapped Register
 162  */
 163 #define CFG_IMMR                0xFFF00000
 164
 165 /*-----------------------------------------------------------------------
 166  * Definitions for initial stack pointer and data area (in DPRAM)
 167  */
 168 #define CFG_INIT_RAM_ADDR       CFG_IMMR
 169 #define CFG_INIT_RAM_END        0x2F00  /* End of used area in DPRAM    */
 170 #define CFG_GBL_DATA_SIZE       64  /* size in bytes reserved for initial data */
 171 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 172 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 173
 174 /*-----------------------------------------------------------------------
 175  * Start addresses for the final memory configuration
 176  * (Set up by the startup code)
 177  * Please note that CFG_SDRAM_BASE _must_ start at 0
 178  */
 179 #define CFG_SDRAM_BASE          0x00000000
 180 #define CFG_FLASH_BASE          0x40000000
 181 #define CFG_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor   */
 182 #define CFG_MONITOR_BASE        CFG_FLASH_BASE
 183 #define CFG_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc()  */
 184
 185 /*
 186  * For booting Linux, the board info and command line data
 187  * have to be in the first 8 MB of memory, since this is
 188  * the maximum mapped by the Linux kernel during initialization.
 189  */
 190 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 191
 192 /*-----------------------------------------------------------------------
 193  * FLASH organization
 194  */
 195
 196 /* use CFI flash driver */
 197 #define CFG_FLASH_CFI           1       /* Flash is CFI conformant */
 198 #define CFG_FLASH_CFI_DRIVER    1       /* Use the common driver */
 199 #define CFG_FLASH_BANKS_LIST    { CFG_FLASH_BASE }
 200 #define CFG_FLASH_EMPTY_INFO
 201 #define CFG_FLASH_USE_BUFFER_WRITE      1
 202 #define CFG_MAX_FLASH_BANKS     2       /* max number of memory banks */
 203 #define CFG_MAX_FLASH_SECT      71      /* max number of sectors on one chip */
 204
 205 #define CFG_ENV_IS_IN_FLASH     1
 206 #define CFG_ENV_OFFSET          0x8000  /*   Offset   of Environment Sector     */
 207 #define CFG_ENV_SIZE            0x4000  /* Total Size of Environment Sector     */
 208
 209 /* Address and size of Redundant Environment Sector     */
 210 #define CFG_ENV_OFFSET_REDUND   (CFG_ENV_OFFSET+CFG_ENV_SIZE)
 211 #define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
 212
 213 #define CFG_USE_PPCENV                  /* Environment embedded in sect .ppcenv */
 214
 215 /*-----------------------------------------------------------------------
 216  * Hardware Information Block
 217  */
 218 #define CFG_HWINFO_OFFSET       0x0003FFC0      /* offset of HW Info block */
 219 #define CFG_HWINFO_SIZE         0x00000040      /* size   of HW Info block */
 220 #define CFG_HWINFO_MAGIC        0x54514D38      /* 'TQM8' */
 221
 222 /*-----------------------------------------------------------------------
 223  * Cache Configuration
 224  */
 225 #define CFG_CACHELINE_SIZE      16      /* For all MPC8xx CPUs                  */
 226 #if defined(CONFIG_CMD_KGDB)
 227 #define CFG_CACHELINE_SHIFT     4       /* log base 2 of the above value        */
 228 #endif
 229
 230 /*-----------------------------------------------------------------------
 231  * SYPCR - System Protection Control                            11-9
 232  * SYPCR can only be written once after reset!
 233  *-----------------------------------------------------------------------
 234  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 235  */
 236 #if defined(CONFIG_WATCHDOG)
 237 #define CFG_SYPCR       (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 238                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 239 #else
 240 #define CFG_SYPCR       (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 241 #endif
 242
 243 /*-----------------------------------------------------------------------
 244  * SIUMCR - SIU Module Configuration                            11-6
 245  *-----------------------------------------------------------------------
 246  * PCMCIA config., multi-function pin tri-state
 247  */
 248 #ifndef CONFIG_CAN_DRIVER
 249 #define CFG_SIUMCR      (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 250 #else   /* we must activate GPL5 in the SIUMCR for CAN */
 251 #define CFG_SIUMCR      (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 252 #endif  /* CONFIG_CAN_DRIVER */
 253
 254 /*-----------------------------------------------------------------------
 255  * TBSCR - Time Base Status and Control                         11-26
 256  *-----------------------------------------------------------------------
 257  * Clear Reference Interrupt Status, Timebase freezing enabled
 258  */
 259 #define CFG_TBSCR       (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 260
 261 /*-----------------------------------------------------------------------
 262  * RTCSC - Real-Time Clock Status and Control Register          11-27
 263  *-----------------------------------------------------------------------
 264  */
 265 #define CFG_RTCSC       (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 266
 267 /*-----------------------------------------------------------------------
 268  * PISCR - Periodic Interrupt Status and Control                11-31
 269  *-----------------------------------------------------------------------
 270  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 271  */
 272 #define CFG_PISCR       (PISCR_PS | PISCR_PITF)
 273
 274 /*-----------------------------------------------------------------------
 275  * PLPRCR - PLL, Low-Power, and Reset Control Register          15-30
 276  *-----------------------------------------------------------------------
 277  * Reset PLL lock status sticky bit, timer expired status bit and timer
 278  * interrupt status bit
 279  */
 280 #define CFG_PLPRCR      (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 281
 282 /*-----------------------------------------------------------------------
 283  * SCCR - System Clock and reset Control Register               15-27
 284  *-----------------------------------------------------------------------
 285  * Set clock output, timebase and RTC source and divider,
 286  * power management and some other internal clocks
 287  */
 288 #define SCCR_MASK       SCCR_EBDF11
 289 #define CFG_SCCR        (SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 290                          SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 291                          SCCR_DFALCD00)
 292
 293 /*-----------------------------------------------------------------------
 294  * PCMCIA stuff
 295  *-----------------------------------------------------------------------
 296  *
 297  */
 298 #define CFG_PCMCIA_MEM_ADDR     (0xE0000000)
 299 #define CFG_PCMCIA_MEM_SIZE     ( 64 << 20 )
 300 #define CFG_PCMCIA_DMA_ADDR     (0xE4000000)
 301 #define CFG_PCMCIA_DMA_SIZE     ( 64 << 20 )
 302 #define CFG_PCMCIA_ATTRB_ADDR   (0xE8000000)
 303 #define CFG_PCMCIA_ATTRB_SIZE   ( 64 << 20 )
 304 #define CFG_PCMCIA_IO_ADDR      (0xEC000000)
 305 #define CFG_PCMCIA_IO_SIZE      ( 64 << 20 )
 306
 307 /*-----------------------------------------------------------------------
 308  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 309  *-----------------------------------------------------------------------
 310  */
 311
 312 #define CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 313
 314 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 315 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 316 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 317
 318 #define CFG_IDE_MAXBUS          1       /* max. 1 IDE bus               */
 319 #define CFG_IDE_MAXDEVICE       1       /* max. 1 drive per IDE bus     */
 320
 321 #define CFG_ATA_IDE0_OFFSET     0x0000
 322
 323 #define CFG_ATA_BASE_ADDR       CFG_PCMCIA_MEM_ADDR
 324
 325 /* Offset for data I/O                  */
 326 #define CFG_ATA_DATA_OFFSET     (CFG_PCMCIA_MEM_SIZE + 0x320)
 327
 328 /* Offset for normal register accesses  */
 329 #define CFG_ATA_REG_OFFSET      (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
 330
 331 /* Offset for alternate registers       */
 332 #define CFG_ATA_ALT_OFFSET      0x0100
 333
 334 /*-----------------------------------------------------------------------
 335  *
 336  *-----------------------------------------------------------------------
 337  *
 338  */
 339 #define CFG_DER 0
 340
 341 /*
 342  * Init Memory Controller:
 343  *
 344  * BR0/1 and OR0/1 (FLASH)
 345  */
 346
 347 #define FLASH_BASE0_PRELIM      0x40000000      /* FLASH bank #0        */
 348 #define FLASH_BASE1_PRELIM      0x60000000      /* FLASH bank #0        */
 349
 350 /* used to re-map FLASH both when starting from SRAM or FLASH:
 351  * restrict access enough to keep SRAM working (if any)
 352  * but not too much to meddle with FLASH accesses
 353  */
 354 #define CFG_REMAP_OR_AM         0x80000000      /* OR addr mask */
 355 #define CFG_PRELIM_OR_AM        0xE0000000      /* OR addr mask */
 356
 357 /*
 358  * FLASH timing:
 359  */
 360 #define CFG_OR_TIMING_FLASH     (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 361                                  OR_SCY_3_CLK | OR_EHTR | OR_BI)
 362
 363 #define CFG_OR0_REMAP   (CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
 364 #define CFG_OR0_PRELIM  (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
 365 #define CFG_BR0_PRELIM  ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 366
 367 #define CFG_OR1_REMAP   CFG_OR0_REMAP
 368 #define CFG_OR1_PRELIM  CFG_OR0_PRELIM
 369 #define CFG_BR1_PRELIM  ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 370
 371 /*
 372  * BR2/3 and OR2/3 (SDRAM)
 373  *
 374  */
 375 #define SDRAM_BASE2_PRELIM      0x00000000      /* SDRAM bank #0        */
 376 #define SDRAM_BASE3_PRELIM      0x20000000      /* SDRAM bank #1        */
 377 #define SDRAM_MAX_SIZE          0x04000000      /* max 64 MB per bank   */
 378
 379 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)      */
 380 #define CFG_OR_TIMING_SDRAM     0x00000A00
 381
 382 #define CFG_OR2_PRELIM  (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
 383 #define CFG_BR2_PRELIM  ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 384
 385 #ifndef CONFIG_CAN_DRIVER
 386 #define CFG_OR3_PRELIM  CFG_OR2_PRELIM
 387 #define CFG_BR3_PRELIM  ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 388 #else   /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
 389 #define CFG_CAN_BASE            0xC0000000      /* CAN mapped at 0xC0000000     */
 390 #define CFG_CAN_OR_AM           0xFFFF8000      /* 32 kB address mask           */
 391 #define CFG_OR3_CAN             (CFG_CAN_OR_AM | OR_G5LA | OR_BI)
 392 #define CFG_BR3_CAN             ((CFG_CAN_BASE & BR_BA_MSK) | \
 393                                         BR_PS_8 | BR_MS_UPMB | BR_V )
 394 #endif  /* CONFIG_CAN_DRIVER */
 395
 396 /*
 397  * Memory Periodic Timer Prescaler
 398  *
 399  * The Divider for PTA (refresh timer) configuration is based on an
 400  * example SDRAM configuration (64 MBit, one bank). The adjustment to
 401  * the number of chip selects (NCS) and the actually needed refresh
 402  * rate is done by setting MPTPR.
 403  *
 404  * PTA is calculated from
 405  *      PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
 406  *
 407  *      gclk      CPU clock (not bus clock!)
 408  *      Trefresh  Refresh cycle * 4 (four word bursts used)
 409  *
 410  * 4096  Rows from SDRAM example configuration
 411  * 1000  factor s -> ms
 412  *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
 413  *    4  Number of refresh cycles per period
 414  *   64  Refresh cycle in ms per number of rows
 415  * --------------------------------------------
 416  * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
 417  *
 418  * 50 MHz => 50.000.000 / Divider =  98
 419  * 66 Mhz => 66.000.000 / Divider = 129
 420  * 80 Mhz => 80.000.000 / Divider = 156
 421  */
 422
 423 #define CFG_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64))
 424 #define CFG_MAMR_PTA    98
 425
 426 /*
 427  * For 16 MBit, refresh rates could be 31.3 us
 428  * (= 64 ms / 2K = 125 / quad bursts).
 429  * For a simpler initialization, 15.6 us is used instead.
 430  *
 431  * #define CFG_MPTPR_2BK_2K     MPTPR_PTP_DIV32         for 2 banks
 432  * #define CFG_MPTPR_1BK_2K     MPTPR_PTP_DIV64         for 1 bank
 433  */
 434 #define CFG_MPTPR_2BK_4K        MPTPR_PTP_DIV16         /* setting for 2 banks  */
 435 #define CFG_MPTPR_1BK_4K        MPTPR_PTP_DIV32         /* setting for 1 bank   */
 436
 437 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit         */
 438 #define CFG_MPTPR_2BK_8K        MPTPR_PTP_DIV8          /* setting for 2 banks  */
 439 #define CFG_MPTPR_1BK_8K        MPTPR_PTP_DIV16         /* setting for 1 bank   */
 440
 441 /*
 442  * MAMR settings for SDRAM
 443  */
 444
 445 /* 8 column SDRAM */
 446 #define CFG_MAMR_8COL   ((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE      |   \
 447                          MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |   \
 448                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 449 /* 9 column SDRAM */
 450 #define CFG_MAMR_9COL   ((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE      |   \
 451                          MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
 452                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 453
 454
 455 /*
 456  * Internal Definitions
 457  *
 458  * Boot Flags
 459  */
 460 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 461 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 462
 463 #endif  /* __CONFIG_H */