include/configs/RPXsuper.h

   1 #ifndef __CONFIG_H
   2 #define __CONFIG_H
   3
   4
   5 /*****************************************************************************
   6  *
   7  * These settings must match the way _your_ board is set up
   8  *
   9  *****************************************************************************/
  10 /* for the AY-Revision which does not use the HRCW */
  11 #define CFG_DEFAULT_IMMR        0x00010000
  12
  13 /* What is the oscillator's (UX2) frequency in Hz? */
  14 #define CONFIG_8260_CLKIN  (66 * 1000 * 1000)
  15
  16 /* How is switch S2 set? We really only want the MODCK[1-3] bits, so
  17  * only the 3 least significant bits are important.
  18 */
  19 #define CFG_SBC_S2  0x04
  20
  21 /* What should MODCK_H be? It is dependent on the oscillator
  22  * frequency, MODCK[1-3], and desired CPM and core frequencies.
  23  * Some example values (all frequencies are in MHz):
  24  *
  25  * MODCK_H   MODCK[1-3]  Osc    CPM    Core
  26  * 0x2       0x2         33     133    133
  27  * 0x2       0x4         33     133    200
  28  * 0x5       0x5         66     133    133
  29  * 0x5       0x7         66     133    200
  30  */
  31 #define CFG_SBC_MODCK_H 0x06
  32
  33 #define CFG_SBC_BOOT_LOW 1      /* only for HRCW */
  34 #undef CFG_SBC_BOOT_LOW
  35
  36 /* What should the base address of the main FLASH be and how big is
  37  * it (in MBytes)? This must contain TEXT_BASE from board/sbc8260/config.mk
  38  * The main FLASH is whichever is connected to *CS0. U-Boot expects
  39  * this to be the SIMM.
  40  */
  41 #define CFG_FLASH0_BASE 0x80000000
  42 #define CFG_FLASH0_SIZE 16
  43
  44 /* What should the base address of the secondary FLASH be and how big
  45  * is it (in Mbytes)? The secondary FLASH is whichever is connected
  46  * to *CS6. U-Boot expects this to be the on board FLASH. If you don't
  47  * want it enabled, don't define these constants.
  48  */
  49 #define CFG_FLASH1_BASE 0
  50 #define CFG_FLASH1_SIZE 0
  51 #undef CFG_FLASH1_BASE
  52 #undef CFG_FLASH1_SIZE
  53
  54 /* What should be the base address of SDRAM DIMM and how big is
  55  * it (in Mbytes)?
  56 */
  57 #define CFG_SDRAM0_BASE 0x00000000
  58 #define CFG_SDRAM0_SIZE 64
  59
  60 /* What should be the base address of SDRAM DIMM and how big is
  61  * it (in Mbytes)?
  62 */
  63 #define CFG_SDRAM1_BASE 0x04000000
  64 #define CFG_SDRAM1_SIZE 32
  65
  66 /* What should be the base address of the LEDs and switch S0?
  67  * If you don't want them enabled, don't define this.
  68  */
  69 #define CFG_LED_BASE 0x00000000
  70
  71 /*
  72  * select serial console configuration
  73  *
  74  * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
  75  * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
  76  * for SCC).
  77  *
  78  * if CONFIG_CONS_NONE is defined, then the serial console routines must
  79  * defined elsewhere.
  80  */
  81 #define CONFIG_CONS_ON_SMC          /* define if console on SMC */
  82 #undef  CONFIG_CONS_ON_SCC          /* define if console on SCC */
  83 #undef  CONFIG_CONS_NONE            /* define if console on neither */
  84 #define CONFIG_CONS_INDEX    1      /* which SMC/SCC channel for console */
  85
  86 /*
  87  * select ethernet configuration
  88  *
  89  * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
  90  * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
  91  * for FCC)
  92  *
  93  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
  94  * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
  95  */
  96 #undef  CONFIG_ETHER_ON_SCC           /* define if ethernet on SCC    */
  97 #define CONFIG_ETHER_ON_FCC           /* define if ethernet on FCC    */
  98 #undef  CONFIG_ETHER_NONE             /* define if ethernet on neither */
  99 #define CONFIG_ETHER_INDEX      3     /* which SCC/FCC channel for ethernet */
 100
 101 #if ( CONFIG_ETHER_INDEX == 3 )
 102
 103 /*
 104  * - Rx-CLK is CLK15
 105  * - Tx-CLK is CLK16
 106  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
 107  * - Enable Half Duplex in FSMR
 108  */
 109 # define CFG_CMXFCR_MASK        (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
 110 # define CFG_CMXFCR_VALUE       (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
 111 # define CFG_CPMFCR_RAMTYPE     0
 112 /*#define CFG_FCC_PSMR          (FCC_PSMR_FDE|FCC_PSMR_LPB) */
 113 # define CFG_FCC_PSMR           0
 114
 115 #else /* CONFIG_ETHER_INDEX */
 116 # error "on RPX Super ethernet must be FCC3"
 117 #endif /* CONFIG_ETHER_INDEX */
 118
 119 #define CONFIG_HARD_I2C         1       /* I2C with hardware support    */
 120 #define CFG_I2C_SPEED           400000  /* I2C speed and slave address  */
 121 #define CFG_I2C_SLAVE           0x7F
 122
 123
 124 /* Define this to reserve an entire FLASH sector (256 KB) for
 125  * environment variables. Otherwise, the environment will be
 126  * put in the same sector as U-Boot, and changing variables
 127  * will erase U-Boot temporarily
 128  */
 129 #define CFG_ENV_IN_OWN_SECT
 130
 131 /* Define to allow the user to overwrite serial and ethaddr */
 132 #define CONFIG_ENV_OVERWRITE
 133
 134 /* What should the console's baud rate be? */
 135 #define CONFIG_BAUDRATE         115200
 136
 137 /* Ethernet MAC address */
 138 #define CONFIG_ETHADDR          08:00:22:50:70:63
 139
 140 #define CONFIG_IPADDR           192.168.1.99
 141 #define CONFIG_SERVERIP         192.168.1.3
 142
 143 /* Set to a positive value to delay for running BOOTCOMMAND */
 144 #define CONFIG_BOOTDELAY        -1
 145
 146 /* undef this to save memory */
 147 #define CFG_LONGHELP
 148
 149 /* Monitor Command Prompt       */
 150 #define CFG_PROMPT              "=> "
 151
 152
 153 /*
 154  * BOOTP options
 155  */
 156 #define CONFIG_BOOTP_BOOTFILESIZE
 157 #define CONFIG_BOOTP_BOOTPATH
 158 #define CONFIG_BOOTP_GATEWAY
 159 #define CONFIG_BOOTP_HOSTNAME
 160
 161
 162 /*
 163  * Command line configuration.
 164  */
 165 #include <config_cmd_default.h>
 166
 167 #define CONFIG_CMD_IMMAP
 168 #define CONFIG_CMD_ASKENV
 169 #define CONFIG_CMD_I2C
 170 #define CONFIG_CMD_REGINFO
 171
 172 #undef CONFIG_CMD_KGDB
 173
 174
 175 /* Where do the internal registers live? */
 176 #define CFG_IMMR               0xF0000000
 177
 178 /* Where do the on board registers (CS4) live? */
 179 #define CFG_REGS_BASE          0xFA000000
 180
 181 /*****************************************************************************
 182  *
 183  * You should not have to modify any of the following settings
 184  *
 185  *****************************************************************************/
 186
 187 #define CONFIG_MPC8260          1       /* This is an MPC8260 CPU   */
 188 #define CONFIG_RPXSUPER         1       /* on an Embedded Planet RPX Super Board  */
 189 #define CONFIG_CPM2             1       /* Has a CPM2 */
 190
 191 #define CONFIG_BOARD_EARLY_INIT_F 1     /* Call board_early_init_f      */
 192
 193 /*
 194  * Miscellaneous configurable options
 195  */
 196 #if defined(CONFIG_CMD_KGDB)
 197 #  define CFG_CBSIZE              1024       /* Console I/O Buffer Size      */
 198 #else
 199 #  define CFG_CBSIZE              256        /* Console I/O Buffer Size      */
 200 #endif
 201
 202 /* Print Buffer Size */
 203 #define CFG_PBSIZE        (CFG_CBSIZE + sizeof(CFG_PROMPT)+16)
 204
 205 #define CFG_MAXARGS       8            /* max number of command args   */
 206
 207 #define CFG_BARGSIZE      CFG_CBSIZE   /* Boot Argument Buffer Size    */
 208
 209 #define CFG_MEMTEST_START 0x04000000   /* memtest works on  */
 210 #define CFG_MEMTEST_END   0x06000000   /* 64-96 MB in SDRAM */
 211
 212 #define CONFIG_CLOCKS_IN_MHZ    1       /* clocks passsed to Linux in MHz */
 213
 214 #define CFG_LOAD_ADDR     0x100000     /* default load address */
 215 #define CFG_HZ            1000         /* decrementer freq: 1 ms ticks */
 216
 217 /* valid baudrates */
 218 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 219
 220 /*
 221  * Low Level Configuration Settings
 222  * (address mappings, register initial values, etc.)
 223  * You should know what you are doing if you make changes here.
 224  */
 225
 226 #define CFG_FLASH_BASE    CFG_FLASH0_BASE
 227 #define CFG_SDRAM_BASE    CFG_SDRAM0_BASE
 228
 229 /*-----------------------------------------------------------------------
 230  * Hard Reset Configuration Words
 231  */
 232 #if defined(CFG_SBC_BOOT_LOW)
 233 #  define  CFG_SBC_HRCW_BOOT_FLAGS  (HRCW_CIP | HRCW_BMS)
 234 #else
 235 #  define  CFG_SBC_HRCW_BOOT_FLAGS  (0)
 236 #endif /* defined(CFG_SBC_BOOT_LOW) */
 237
 238 /* get the HRCW ISB field from CFG_IMMR */
 239 #define CFG_SBC_HRCW_IMMR ( ((CFG_IMMR & 0x10000000) >> 10) |\
 240                             ((CFG_IMMR & 0x01000000) >> 7)  |\
 241                             ((CFG_IMMR & 0x00100000) >> 4) )
 242
 243 #define CFG_HRCW_MASTER (HRCW_BPS11                           |\
 244                          HRCW_DPPC11                          |\
 245                          CFG_SBC_HRCW_IMMR                    |\
 246                          HRCW_MMR00                           |\
 247                          HRCW_LBPC11                          |\
 248                          HRCW_APPC10                          |\
 249                          HRCW_CS10PC00                        |\
 250                          (CFG_SBC_MODCK_H & HRCW_MODCK_H1111) |\
 251                          CFG_SBC_HRCW_BOOT_FLAGS)
 252
 253 /* no slaves */
 254 #define CFG_HRCW_SLAVE1 0
 255 #define CFG_HRCW_SLAVE2 0
 256 #define CFG_HRCW_SLAVE3 0
 257 #define CFG_HRCW_SLAVE4 0
 258 #define CFG_HRCW_SLAVE5 0
 259 #define CFG_HRCW_SLAVE6 0
 260 #define CFG_HRCW_SLAVE7 0
 261
 262 /*-----------------------------------------------------------------------
 263  * Definitions for initial stack pointer and data area (in DPRAM)
 264  */
 265 #define CFG_INIT_RAM_ADDR       CFG_IMMR
 266 #define CFG_INIT_RAM_END        0x4000  /* End of used area in DPRAM    */
 267 #define CFG_GBL_DATA_SIZE      128     /* bytes reserved for initial data */
 268 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 269 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 270
 271 /*-----------------------------------------------------------------------
 272  * Start addresses for the final memory configuration
 273  * (Set up by the startup code)
 274  * Please note that CFG_SDRAM_BASE _must_ start at 0
 275  * Note also that the logic that sets CFG_RAMBOOT is platform dependent.
 276  */
 277 #define CFG_MONITOR_BASE        (CFG_FLASH0_BASE + 0x00F00000)
 278
 279 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 280 #  define CFG_RAMBOOT
 281 #endif
 282
 283 #define CFG_MONITOR_LEN      (256 << 10)     /* Reserve 256 kB for Monitor   */
 284 #define CFG_MALLOC_LEN       (128 << 10)     /* Reserve 128 kB for malloc()  */
 285
 286 /*
 287  * For booting Linux, the board info and command line data
 288  * have to be in the first 8 MB of memory, since this is
 289  * the maximum mapped by the Linux kernel during initialization.
 290  */
 291 #define CFG_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
 292
 293 /*-----------------------------------------------------------------------
 294  * FLASH and environment organization
 295  */
 296 #define CFG_MAX_FLASH_BANKS   1       /* max number of memory banks         */
 297 #define CFG_MAX_FLASH_SECT    71      /* max number of sectors on one chip  */
 298
 299 #define CFG_FLASH_ERASE_TOUT  8000    /* Timeout for Flash Erase (in ms)    */
 300 #define CFG_FLASH_WRITE_TOUT  1       /* Timeout for Flash Write (in ms)    */
 301
 302 #ifndef CFG_RAMBOOT
 303 #  define CFG_ENV_IS_IN_FLASH  1
 304
 305 #  ifdef CFG_ENV_IN_OWN_SECT
 306 #    define CFG_ENV_ADDR       (CFG_MONITOR_BASE + 0x40000)
 307 #    define CFG_ENV_SECT_SIZE  0x40000
 308 #  else
 309 #    define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN - CFG_ENV_SECT_SIZE)
 310 #    define CFG_ENV_SIZE       0x1000  /* Total Size of Environment Sector */
 311 #    define CFG_ENV_SECT_SIZE  0x10000 /* see README - env sect real size */
 312 #  endif /* CFG_ENV_IN_OWN_SECT */
 313 #else
 314 #  define CFG_ENV_IS_IN_NVRAM  1
 315 #  define CFG_ENV_ADDR         (CFG_MONITOR_BASE - 0x1000)
 316 #  define CFG_ENV_SIZE         0x200
 317 #endif /* CFG_RAMBOOT */
 318
 319 /*-----------------------------------------------------------------------
 320  * Cache Configuration
 321  */
 322 #define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU */
 323
 324 #if defined(CONFIG_CMD_KGDB)
 325 #  define CFG_CACHELINE_SHIFT     5     /* log base 2 of the above value */
 326 #endif
 327
 328 /*-----------------------------------------------------------------------
 329  * HIDx - Hardware Implementation-dependent Registers                    2-11
 330  *-----------------------------------------------------------------------
 331  * HID0 also contains cache control - initially enable both caches and
 332  * invalidate contents, then the final state leaves only the instruction
 333  * cache enabled. Note that Power-On and Hard reset invalidate the caches,
 334  * but Soft reset does not.
 335  *
 336  * HID1 has only read-only information - nothing to set.
 337  */
 338 #define CFG_HID0_INIT   (/*HID0_ICE  |*/\
 339                          /*HID0_DCE  |*/\
 340                          HID0_ICFI |\
 341                          HID0_DCI  |\
 342                          HID0_IFEM |\
 343                          HID0_ABE)
 344
 345 #define CFG_HID0_FINAL  (/*HID0_ICE  |*/\
 346                          HID0_IFEM |\
 347                          HID0_ABE  |\
 348                          HID0_EMCP)
 349 #define CFG_HID2        0
 350
 351 /*-----------------------------------------------------------------------
 352  * RMR - Reset Mode Register
 353  *-----------------------------------------------------------------------
 354  */
 355 #define CFG_RMR         0
 356
 357 /*-----------------------------------------------------------------------
 358  * BCR - Bus Configuration                                       4-25
 359  *-----------------------------------------------------------------------
 360  */
 361 #define CFG_BCR         (BCR_EBM   |\
 362                          BCR_PLDP  |\
 363                          BCR_EAV   |\
 364                          BCR_NPQM0)
 365
 366 /*-----------------------------------------------------------------------
 367  * SIUMCR - SIU Module Configuration                             4-31
 368  *-----------------------------------------------------------------------
 369  */
 370
 371 #define CFG_SIUMCR      (SIUMCR_L2CPC01 |\
 372                          SIUMCR_APPC10  |\
 373                          SIUMCR_CS10PC01)
 374
 375
 376 /*-----------------------------------------------------------------------
 377  * SYPCR - System Protection Control                            11-9
 378  * SYPCR can only be written once after reset!
 379  *-----------------------------------------------------------------------
 380  * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
 381  */
 382 #define CFG_SYPCR       (SYPCR_SWTC |\
 383                          SYPCR_BMT  |\
 384                          SYPCR_PBME |\
 385                          SYPCR_LBME |\
 386                          SYPCR_SWRI |\
 387                          SYPCR_SWP)
 388
 389 /*-----------------------------------------------------------------------
 390  * TMCNTSC - Time Counter Status and Control                     4-40
 391  *-----------------------------------------------------------------------
 392  * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
 393  * and enable Time Counter
 394  */
 395 #define CFG_TMCNTSC     (TMCNTSC_SEC |\
 396                          TMCNTSC_ALR |\
 397                          TMCNTSC_TCF |\
 398                          TMCNTSC_TCE)
 399
 400 /*-----------------------------------------------------------------------
 401  * PISCR - Periodic Interrupt Status and Control                 4-42
 402  *-----------------------------------------------------------------------
 403  * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
 404  * Periodic timer
 405  */
 406 #define CFG_PISCR       (PISCR_PS  |\
 407                          PISCR_PTF |\
 408                          PISCR_PTE)
 409
 410 /*-----------------------------------------------------------------------
 411  * SCCR - System Clock Control                                   9-8
 412  *-----------------------------------------------------------------------
 413  */
 414 #define CFG_SCCR        (SCCR_DFBRG01)
 415
 416 /*-----------------------------------------------------------------------
 417  * RCCR - RISC Controller Configuration                         13-7
 418  *-----------------------------------------------------------------------
 419  */
 420 #define CFG_RCCR        0
 421
 422 /*
 423  * Init Memory Controller:
 424  *
 425  * Bank Bus     Machine PortSz  Device
 426  * ---- ---     ------- ------  ------
 427  *  0   60x     GPCM    64 bit  FLASH (BGA - 16MB AMD AM29DL323DB90)
 428  *  1   60x     SDRAM   64 bit  SDRAM (BGA - 64MB Hitachi HM5225325FBP-B60)
 429  *  2   Local   SDRAM   32 bit  SDRAM (BGA - 32MB Hitachi HM5225325FBP-B60)
 430  *  3   unused
 431  *  4   60x     GPCM     8 bit  Board Regs, LEDs, switches
 432  *  5   unused
 433  *  6   unused
 434  *  7   unused
 435  *  8   PCMCIA
 436  *  9   unused
 437  * 10   unused
 438  * 11   unused
 439 */
 440
 441 /* Bank 0 - FLASH
 442  *
 443  */
 444 #define CFG_BR0_PRELIM  ((CFG_FLASH0_BASE & BRx_BA_MSK) |\
 445                          BRx_PS_64                      |\
 446                          BRx_DECC_NONE                  |\
 447                          BRx_MS_GPCM_P                  |\
 448                          BRx_V)
 449
 450 #define CFG_OR0_PRELIM  (MEG_TO_AM(CFG_FLASH0_SIZE)     |\
 451                          ORxG_CSNT                      |\
 452                          ORxG_ACS_DIV1                  |\
 453                          ORxG_SCY_6_CLK                 |\
 454                          ORxG_EHTR)
 455
 456 /* Bank 1 - SDRAM
 457  *
 458  */
 459 #define CFG_BR1_PRELIM  ((CFG_SDRAM0_BASE & BRx_BA_MSK) |\
 460                          BRx_PS_64                      |\
 461                          BRx_MS_SDRAM_P                 |\
 462                          BRx_V)
 463
 464 #define CFG_OR1_PRELIM  (MEG_TO_AM(CFG_SDRAM0_SIZE)     |\
 465                          ORxS_BPD_4                     |\
 466                          ORxS_ROWST_PBI0_A8             |\
 467                          ORxS_NUMR_12                   |\
 468                          ORxS_IBID)
 469
 470 #define CFG_PSDMR       0x014DA412
 471 #define CFG_PSRT        0x79
 472
 473
 474 /* Bank 2 - SDRAM
 475  *
 476  */
 477 #define CFG_BR2_PRELIM  ((CFG_SDRAM1_BASE & BRx_BA_MSK) |\
 478                          BRx_PS_32                      |\
 479                          BRx_MS_SDRAM_L                 |\
 480                          BRx_V)
 481
 482 #define CFG_OR2_PRELIM  (MEG_TO_AM(CFG_SDRAM1_SIZE)     |\
 483                          ORxS_BPD_4                     |\
 484                          ORxS_ROWST_PBI0_A9             |\
 485                          ORxS_NUMR_12)
 486
 487 #define CFG_LSDMR       0x0169A512
 488 #define CFG_LSRT        0x79
 489
 490 #define CFG_MPTPR       (0x0800 & MPTPR_PTP_MSK)
 491
 492 /* Bank 4 - On board registers
 493  *
 494  */
 495 #define CFG_BR4_PRELIM   ((CFG_REGS_BASE & BRx_BA_MSK)  |\
 496                            BRx_PS_8                     |\
 497                            BRx_MS_GPCM_P                |\
 498                            BRx_V)
 499
 500 #define CFG_OR4_PRELIM    (ORxG_AM_MSK                 |\
 501                            ORxG_CSNT                   |\
 502                            ORxG_ACS_DIV1               |\
 503                            ORxG_SCY_5_CLK              |\
 504                            ORxG_TRLX)
 505
 506 /*
 507  * Internal Definitions
 508  *
 509  * Boot Flags
 510  */
 511 #define BOOTFLAG_COLD   0x01    /* Normal Power-On: Boot from FLASH  */
 512 #define BOOTFLAG_WARM   0x02    /* Software reboot                   */
 513
 514 #endif  /* __CONFIG_H */