MINI2440: Remove the extraneous PLL config at startup
[u-boot-openmoko/mini2440.git] / drivers / pci / pci_sh7780.c
blobd63d67d2dcddc0f3e4f248091912e5551fa5c7c8
1 /*
2 * SH7780 PCI Controller (PCIC) for U-Boot.
3 * (C) Dustin McIntire (dustin@sensoria.com)
4 * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
5 * (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
7 * See file CREDITS for list of people who contributed to this
8 * project.
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
26 #include <common.h>
28 #include <asm/processor.h>
29 #include <asm/io.h>
30 #include <pci.h>
32 #define SH7780_VENDOR_ID 0x1912
33 #define SH7780_DEVICE_ID 0x0002
34 #define SH7780_PCICR_PREFIX 0xA5000000
35 #define SH7780_PCICR_PFCS 0x00000800
36 #define SH7780_PCICR_FTO 0x00000400
37 #define SH7780_PCICR_PFE 0x00000200
38 #define SH7780_PCICR_TBS 0x00000100
39 #define SH7780_PCICR_ARBM 0x00000040
40 #define SH7780_PCICR_IOCS 0x00000004
41 #define SH7780_PCICR_PRST 0x00000002
42 #define SH7780_PCICR_CFIN 0x00000001
44 #define p4_in(addr) *((vu_long *)addr)
45 #define p4_out(data,addr) *(vu_long *)(addr) = (data)
46 #define p4_inw(addr) *((vu_short *)addr)
47 #define p4_outw(data,addr) *(vu_short *)(addr) = (data)
49 int pci_sh4_read_config_dword(struct pci_controller *hose,
50 pci_dev_t dev, int offset, u32 *value)
52 u32 par_data = 0x80000000 | dev;
54 p4_out(par_data | (offset & 0xfc), SH7780_PCIPAR);
55 *value = p4_in(SH7780_PCIPDR);
57 return 0;
60 int pci_sh4_write_config_dword(struct pci_controller *hose,
61 pci_dev_t dev, int offset, u32 value)
63 u32 par_data = 0x80000000 | dev;
65 p4_out(par_data | (offset & 0xfc), SH7780_PCIPAR);
66 p4_out(value, SH7780_PCIPDR);
67 return 0;
70 int pci_sh7780_init(struct pci_controller *hose)
72 p4_out(0x01, SH7780_PCIECR);
74 if (p4_inw(SH7780_PCIVID) != SH7780_VENDOR_ID
75 && p4_inw(SH7780_PCIDID) != SH7780_DEVICE_ID){
76 printf("PCI: Unknown PCI host bridge.\n");
77 return;
79 printf("PCI: SH7780 PCI host bridge found.\n");
81 /* Toggle PCI reset pin */
82 p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_PRST), SH7780_PCICR);
83 udelay(100000);
84 p4_out(SH7780_PCICR_PREFIX, SH7780_PCICR);
85 p4_outw(0x0047, SH7780_PCICMD);
87 p4_out(0x07F00001, SH7780_PCILSR0);
88 p4_out(0x08000000, SH7780_PCILAR0);
89 p4_out(0x00000000, SH7780_PCILSR1);
90 p4_out(0, SH7780_PCILAR1);
91 p4_out(0x08000000, SH7780_PCIMBAR0);
92 p4_out(0x00000000, SH7780_PCIMBAR1);
94 p4_out(0xFD000000, SH7780_PCIMBR0);
95 p4_out(0x00FC0000, SH7780_PCIMBMR0);
97 /* if use Operand Cache then enable PCICSCR Soonp bits. */
98 p4_out(0x08000000, SH7780_PCICSAR0);
99 p4_out(0x0000001B, SH7780_PCICSCR0); /* Snoop bit :On */
101 p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_CFIN | SH7780_PCICR_ARBM
102 | SH7780_PCICR_FTO | SH7780_PCICR_PFCS | SH7780_PCICR_PFE),
103 SH7780_PCICR);
105 pci_sh4_init(hose);
106 return 0;