include/configs/hmi1001.h

   1 /*
   2  * (C) Copyright 2003-2005
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 #ifndef __CONFIG_H
  25 #define __CONFIG_H
  26
  27 /*
  28  * High Level Configuration Options
  29  * (easy to change)
  30  */
  31
  32 #define CONFIG_MPC5xxx          1       /* This is an MPC5xxx CPU               */
  33 #define CONFIG_MPC5200          1       /* (more precisely an MPC5200 CPU)      */
  34 #define CONFIG_HMI1001          1       /* HMI1001 board                        */
  35
  36 #define CFG_MPC5XXX_CLKIN       33000000 /* ... running at 33.000000MHz         */
  37
  38 #define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH     */
  39 #define BOOTFLAG_WARM           0x02    /* Software reboot                      */
  40
  41 #define CONFIG_BOARD_EARLY_INIT_R
  42
  43 /*
  44  * Serial console configuration
  45  */
  46 #define CONFIG_PSC_CONSOLE      1       /* console is on PSC1   */
  47 #define CONFIG_BAUDRATE         115200  /* ... at 115200 bps    */
  48 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
  49
  50 /* Partitions */
  51 #define CONFIG_DOS_PARTITION
  52
  53
  54 /*
  55  * BOOTP options
  56  */
  57 #define CONFIG_BOOTP_BOOTFILESIZE
  58 #define CONFIG_BOOTP_BOOTPATH
  59 #define CONFIG_BOOTP_GATEWAY
  60 #define CONFIG_BOOTP_HOSTNAME
  61
  62
  63 /*
  64  * Command line configuration.
  65  */
  66 #include <config_cmd_default.h>
  67
  68 #define CONFIG_CMD_DATE
  69 #define CONFIG_CMD_DISPLAY
  70 #define CONFIG_CMD_DHCP
  71 #define CONFIG_CMD_EEPROM
  72 #define CONFIG_CMD_I2C
  73 #define CONFIG_CMD_IDE
  74 #define CONFIG_CMD_NFS
  75 #define CONFIG_CMD_PCI
  76 #define CONFIG_CMD_SNTP
  77
  78
  79 #define CONFIG_TIMESTAMP        1       /* Print image info with timestamp */
  80
  81 #if (TEXT_BASE == 0xFFF00000) /* Boot low */
  82 #   define CFG_LOWBOOT          1
  83 #endif
  84
  85 /*
  86  * Autobooting
  87  */
  88 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds */
  89
  90 #define CONFIG_PREBOOT  "echo;" \
  91         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
  92         "echo"
  93
  94 #undef  CONFIG_BOOTARGS
  95
  96 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  97         "netdev=eth0\0"                                                 \
  98         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
  99                 "nfsroot=${serverip}:${rootpath}\0"                     \
 100         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 101         "addip=setenv bootargs ${bootargs} "                            \
 102                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 103                 ":${hostname}:${netdev}:off panic=1\0"                  \
 104         "flash_nfs=run nfsargs addip;"                                  \
 105                 "bootm ${kernel_addr}\0"                                \
 106         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
 107         "rootpath=/opt/eldk/ppc_82xx\0"                                 \
 108         ""
 109
 110 #define CONFIG_BOOTCOMMAND      "run net_nfs"
 111
 112 #define CONFIG_MISC_INIT_R      1
 113
 114 /*
 115  * IPB Bus clocking configuration.
 116  */
 117 #undef CFG_IPBCLK_EQUALS_XLBCLK         /* define for 133MHz speed */
 118
 119 /*
 120  * I2C configuration
 121  */
 122 #define CONFIG_HARD_I2C         1       /* I2C with hardware support */
 123 #define CFG_I2C_MODULE          2       /* Select I2C module #1 or #2 */
 124
 125 #define CFG_I2C_SPEED           100000 /* 100 kHz */
 126 #define CFG_I2C_SLAVE           0x7F
 127
 128 /*
 129  * EEPROM configuration
 130  */
 131 #define CFG_I2C_EEPROM_ADDR             0x58
 132 #define CFG_I2C_EEPROM_ADDR_LEN         1
 133 #define CFG_EEPROM_PAGE_WRITE_BITS      4
 134 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS  10
 135
 136 /*
 137  * RTC configuration
 138  */
 139 #define CONFIG_RTC_PCF8563
 140 #define CFG_I2C_RTC_ADDR                0x51
 141
 142 /*
 143  * Flash configuration
 144  */
 145 #define CFG_FLASH_BASE          0xFF800000
 146
 147 #define CFG_FLASH_SIZE          0x00800000 /* 8 MByte */
 148 #define CFG_MAX_FLASH_SECT      67      /* max num of sects on one chip */
 149
 150 #define CFG_ENV_ADDR            (TEXT_BASE+0x40000) /* second sector */
 151 #define CFG_MAX_FLASH_BANKS     1       /* max num of flash banks
 152                                            (= chip selects) */
 153 #define CFG_FLASH_ERASE_TOUT    240000  /* Flash Erase Timeout (in ms)  */
 154 #define CFG_FLASH_WRITE_TOUT    500     /* Flash Write Timeout (in ms)  */
 155
 156 #define CFG_FLASH_CFI_DRIVER
 157 #define CFG_FLASH_CFI
 158 #define CFG_FLASH_EMPTY_INFO
 159 #define CFG_FLASH_CFI_AMD_RESET
 160
 161 /*
 162  * Environment settings
 163  */
 164 #define CFG_ENV_IS_IN_FLASH     1
 165 #define CFG_ENV_SIZE            0x4000
 166 #define CFG_ENV_SECT_SIZE       0x20000
 167 #define CFG_ENV_OFFSET_REDUND   (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
 168 #define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
 169
 170 /*
 171  * Memory map
 172  */
 173 #define CFG_MBAR                0xF0000000
 174 #define CFG_SDRAM_BASE          0x00000000
 175 #define CFG_DEFAULT_MBAR        0x80000000
 176 #define CFG_DISPLAY_BASE        0x80600000
 177 #define CFG_STATUS1_BASE        0x80600200
 178 #define CFG_STATUS2_BASE        0x80600300
 179
 180 /* Settings for XLB = 132 MHz */
 181 #define SDRAM_DDR        1
 182 #define SDRAM_MODE      0x018D0000
 183 #define SDRAM_EMODE     0x40090000
 184 #define SDRAM_CONTROL   0x714f0f00
 185 #define SDRAM_CONFIG1   0x73722930
 186 #define SDRAM_CONFIG2   0x47770000
 187 #define SDRAM_TAPDELAY  0x10000000
 188
 189 /* Use ON-Chip SRAM until RAM will be available */
 190 #define CFG_INIT_RAM_ADDR       MPC5XXX_SRAM
 191 #ifdef CONFIG_POST
 192 /* preserve space for the post_word at end of on-chip SRAM */
 193 #define CFG_INIT_RAM_END        MPC5XXX_SRAM_POST_SIZE
 194 #else
 195 #define CFG_INIT_RAM_END        MPC5XXX_SRAM_SIZE
 196 #endif
 197
 198
 199 #define CFG_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
 200 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 201 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 202
 203 #define CFG_MONITOR_BASE    TEXT_BASE
 204 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 205 #   define CFG_RAMBOOT          1
 206 #endif
 207
 208 #define CFG_MONITOR_LEN         (192 << 10)     /* Reserve 192 kB for Monitor   */
 209 #define CFG_MALLOC_LEN          (512 << 10)     /* Reserve 128 kB for malloc()  */
 210 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 211
 212 /*
 213  * Ethernet configuration
 214  */
 215 #define CONFIG_MPC5xxx_FEC      1
 216 #define CONFIG_PHY_ADDR         0x00
 217 #define CONFIG_MII              1               /* MII PHY management           */
 218
 219 /*
 220  * GPIO configuration
 221  */
 222 #define CFG_GPS_PORT_CONFIG     0x01051004
 223
 224 /*
 225  * Miscellaneous configurable options
 226  */
 227 #define CFG_LONGHELP                    /* undef to save memory     */
 228 #define CFG_PROMPT              "=> "   /* Monitor Command Prompt   */
 229 #if defined(CONFIG_CMD_KGDB)
 230 #define CFG_CBSIZE              1024    /* Console I/O Buffer Size  */
 231 #else
 232 #define CFG_CBSIZE              256     /* Console I/O Buffer Size  */
 233 #endif
 234 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 235 #define CFG_MAXARGS             16      /* max number of command args   */
 236 #define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
 237
 238 #define CFG_CACHELINE_SIZE      32      /* For MPC5xxx CPUs                     */
 239 #if defined(CONFIG_CMD_KGDB)
 240 #  define CFG_CACHELINE_SHIFT   5       /* log base 2 of the above value        */
 241 #endif
 242
 243 /* Enable an alternate, more extensive memory test */
 244 #define CFG_ALT_MEMTEST
 245
 246 #define CFG_MEMTEST_START       0x00100000      /* memtest works on */
 247 #define CFG_MEMTEST_END         0x00f00000      /* 1 ... 15 MB in DRAM  */
 248
 249 #define CFG_LOAD_ADDR           0x100000        /* default load address */
 250
 251 #define CFG_HZ                  1000    /* decrementer freq: 1 ms ticks */
 252
 253 /*
 254  * Enable loopw command.
 255  */
 256 #define CONFIG_LOOPW
 257
 258 /*
 259  * Various low-level settings
 260  */
 261 #if defined(CONFIG_MPC5200)
 262 #define CFG_HID0_INIT           HID0_ICE | HID0_ICFI
 263 #define CFG_HID0_FINAL          HID0_ICE
 264 #else
 265 #define CFG_HID0_INIT           0
 266 #define CFG_HID0_FINAL          0
 267 #endif
 268
 269 #define CFG_BOOTCS_START        CFG_FLASH_BASE
 270 #define CFG_BOOTCS_SIZE         CFG_FLASH_SIZE
 271 #define CFG_BOOTCS_CFG          0x0004FB00
 272 #define CFG_CS0_START           CFG_FLASH_BASE
 273 #define CFG_CS0_SIZE            CFG_FLASH_SIZE
 274
 275 /* 8Mbit SRAM @0x80100000 */
 276 #define CFG_CS1_START           0x80100000
 277 #define CFG_CS1_SIZE            0x00100000
 278 #define CFG_CS1_CFG             0x19B00
 279
 280 /* FRAM 32Kbyte @0x80700000 */
 281 #define CFG_CS2_START           0x80700000
 282 #define CFG_CS2_SIZE            0x00008000
 283 #define CFG_CS2_CFG             0x19800
 284
 285 /* Display H1, Status Inputs, EPLD @0x80600000 */
 286 #define CFG_CS3_START           0x80600000
 287 #define CFG_CS3_SIZE            0x00100000
 288 #define CFG_CS3_CFG             0x00019800
 289
 290 #define CFG_CS_BURST            0x00000000
 291 #define CFG_CS_DEADCYCLE        0x33333333
 292
 293 /*-----------------------------------------------------------------------
 294  * IDE/ATA stuff Supports IDE harddisk
 295  *-----------------------------------------------------------------------
 296  */
 297
 298 #undef  CONFIG_IDE_8xx_PCCARD           /* Use IDE with PC Card Adapter */
 299
 300 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 301 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 302
 303 #define CFG_IDE_MAXBUS          1       /* max. 1 IDE bus               */
 304 #define CFG_IDE_MAXDEVICE       2       /* max. 2 drives per IDE bus    */
 305
 306 #define CONFIG_IDE_PREINIT      1
 307
 308 #define CFG_ATA_IDE0_OFFSET     0x0000
 309
 310 #define CFG_ATA_BASE_ADDR       MPC5XXX_ATA
 311
 312 /* Offset for data I/O                  */
 313 #define CFG_ATA_DATA_OFFSET     (0x0060)
 314
 315 /* Offset for normal register accesses  */
 316 #define CFG_ATA_REG_OFFSET      (CFG_ATA_DATA_OFFSET)
 317
 318 /* Offset for alternate registers       */
 319 #define CFG_ATA_ALT_OFFSET      (0x005C)
 320
 321 /* Interval between registers                                                */
 322 #define CFG_ATA_STRIDE          4
 323
 324 #define CONFIG_ATAPI            1
 325
 326 #define CONFIG_VIDEO_SMI_LYNXEM
 327 #define CONFIG_CFB_CONSOLE
 328 #define CONFIG_VGA_AS_SINGLE_DEVICE
 329 #define CONFIG_VIDEO_LOGO
 330
 331 /*
 332  * PCI Mapping:
 333  * 0x40000000 - 0x4fffffff - PCI Memory
 334  * 0x50000000 - 0x50ffffff - PCI IO Space
 335  */
 336 #define CONFIG_PCI              1
 337 #define CONFIG_PCI_PNP          1
 338 #define CONFIG_PCI_SCAN_SHOW    1
 339
 340 #define CONFIG_PCI_MEM_BUS      0x40000000
 341 #define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
 342 #define CONFIG_PCI_MEM_SIZE     0x10000000
 343
 344 #define CONFIG_PCI_IO_BUS       0x50000000
 345 #define CONFIG_PCI_IO_PHYS      CONFIG_PCI_IO_BUS
 346 #define CONFIG_PCI_IO_SIZE      0x01000000
 347
 348 #define CFG_ISA_IO              CONFIG_PCI_IO_BUS
 349
 350 /*---------------------------------------------------------------------*/
 351 /* Display addresses                                                   */
 352 /*---------------------------------------------------------------------*/
 353
 354 #define CFG_DISP_CHR_RAM        (CFG_DISPLAY_BASE + 0x38)
 355 #define CFG_DISP_CWORD          (CFG_DISPLAY_BASE + 0x30)
 356
 357 #endif /* __CONFIG_H */