1 commit 011595307731a7a67a7445d107c279d031e8ab97
2 Author: Heiko Schocher <hs@pollux.denx.de>
3 Date: Sat Jul 14 01:06:58 2007 +0200
5 [PCS440EP] - fix compile error, if BUILD_DIR is used
7 commit fad63407154f46246ce80d53a9c669a44362ac67
8 Author: Heiko Schocher <hs@pollux.denx.de>
9 Date: Fri Jul 13 09:54:17 2007 +0200
11 make show_boot_progress () weak.
13 Signed-off-by: Heiko Schocher <hs@denx.de>
15 commit 907902472391b6ca1876ec300687562ecaf459b1
16 Author: Heiko Schocher <hs@pollux.denx.de>
17 Date: Fri Jul 13 08:26:05 2007 +0200
19 [PCS440EP] - The DIAG LEDs are now blinking, if an error occur
20 - fix compile error, if BUILD_DIR is used
22 Signed-off-by: Heiko Schocher <hs@denx.de>
24 commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
25 Author: Wolfgang Denk <wd@denx.de>
26 Date: Thu Jul 12 01:45:34 2007 +0200
28 Update CHANGELOG, minor coding style cleanup.
30 Signed-off-by: Wolfgang Denk <wd@denx.de>
32 commit fa1df308926a6f70e3504c57514ef27ac31fd13a
33 Author: Bartlomiej Sieka <tur@semihalf.com>
34 Date: Wed Jul 11 20:11:07 2007 +0200
36 CM1.QP1: Support for the Schindler CM1.QP1 board.
38 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
39 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
41 commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
42 Author: Heiko Schocher <hs@pollux.denx.de>
43 Date: Wed Jul 11 18:39:11 2007 +0200
45 [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
46 - now the Flash ST M29W040B is supported (not tested)
47 - fix the "led" command
48 - fix compile error, if BUILD_DIR is used
50 Signed-off-by: Heiko Schocher <hs@denx.de>
52 commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
53 Author: Wolfgang Denk <wd@denx.de>
54 Date: Tue Jul 10 00:01:28 2007 +0200
56 Coding style cleanup; update CHANGELOG.
58 Signed-off-by: Wolfgang Denk <wd@denx.de>
60 commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
61 Author: Wolfgang Denk <wd@denx.de>
62 Date: Fri Jul 6 02:50:19 2007 +0200
64 Code cleanup and default config update for STC GP3 SSA board.
66 Signed-off-by: Wolfgang Denk <wd@denx.de>
68 commit b44896215a09c60fa40cae906f7ed207bbc2c492
69 Author: Sergei Poselenov <sposelenov@emcraft.com>
70 Date: Thu Jul 5 08:17:37 2007 +0200
72 Merged POST framework with the current TOT.
74 Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
76 commit f780b83316d9af1f61d71cc88b1917b387b9b995
77 Author: Niklaus Giger <niklausgiger@gmx.ch>
78 Date: Wed Jun 27 18:11:38 2007 +0200
80 resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
82 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
84 commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
85 Author: Stefan Roese <sr@denx.de>
86 Date: Wed Jul 4 10:06:30 2007 +0200
88 ppc4xx: Update lwmon5 board
90 - Add optional ECC generation routine to preserve existing
91 RAM values. This is needed for the Linux log-buffer support
92 - Add optional DDR2 setup with CL=4
93 - GPIO50 not used anymore
94 - Lime register setup added
96 Signed-off-by: Stefan Roese <sr@denx.de>
98 commit 1f2a05898658900dc5717761e27abf2052e67e13
99 Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
100 Date: Sat Jun 30 18:50:48 2007 +0200
104 Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
106 commit a5d71e290f3673269be8eefb4ec44f53412f9461
107 Author: Heiko Schocher <hs@pollux.denx.de>
108 Date: Mon Jun 25 19:11:37 2007 +0200
110 [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
112 Signed-off-by: Heiko Schocher <hs@denx.de>
114 commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
115 Author: Niklaus Giger <niklaus.giger@nestal.com>
116 Date: Mon Jun 25 17:03:13 2007 +0200
118 ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
120 This patch prints the DDR status registers upon machine check
121 interrupt on the 440EPx/GRx. This can be useful especially when
122 ECC support is enabled.
124 I added some small changes to the original patch from Niklaus to
125 make it compile clean.
127 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
128 Signed-off-by: Stefan Roese <sr@denx.de>
130 commit 807018fb7faceb429ce0cb47baa2073746b33a4e
131 Author: Niklaus Giger <niklaus.giger@nestal.com>
132 Date: Mon Jun 25 16:50:55 2007 +0200
134 ppc4xx: Fix O=buildir builds
136 This patch fixes the problem to assemble cpu/ppc4xx/start.S
137 experienced last week where building failed having specified
140 Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
142 commit 466fff1a7bb5fe764a06450626f6098219f446b8
143 Author: Stefan Roese <sr@denx.de>
144 Date: Mon Jun 25 15:57:39 2007 +0200
146 ppc4xx: Add pci_pre_init() for 405 boards
148 This patch removes the CFG_PCI_PRE_INIT option completely, since
149 it's not needed anymore with the patch from Matthias Fuchs with
150 the "weak" pci_pre_init() implementation.
152 Signed-off-by: Stefan Roese <sr@denx.de>
154 commit 6f35c53166213c24a5a0e2390ed861136ff73870
155 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
156 Date: Sun Jun 24 17:41:21 2007 +0200
158 ppc4xx: Maintenance patch for esd's CPCI405 derivats
160 -add pci_pre_init() for pci interrupt fixup code
161 -disable phy sleep mode via reset_phy() function
162 -use correct io accessors
165 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
167 commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
168 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
169 Date: Sun Jun 24 17:23:41 2007 +0200
171 ppc4xx: Add pci_pre_init() for 405 boards
173 This patch adds support for calling a plattform dependant
174 pci_pre_init() function for 405 boards. This can be used to
175 move the current pci_405gp_fixup_irq() function into the
178 This patch also makes the CFG_PCI_PRE_INIT define obsolete.
179 A default function with 'weak' attribute is used when
180 a board specific pci_pre_init() is not implemented.
182 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
184 commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
185 Author: Wolfgang Denk <wd@denx.de>
186 Date: Fri Jun 22 23:59:00 2007 +0200
188 Coding stylke cleanup; rebuild CHANGELOG
190 commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
191 Author: Igor Lisitsin <igor@emcraft.com>
192 Date: Wed Apr 18 14:55:19 2007 +0400
194 Adapt log buffer code to support Linux 2.6
196 A new environment variable, "logversion", selects the log buffer
197 behaviour. If it is not set or set to a value other than 2, then the
198 old, Linux 2.4.4, behaviour is selected.
200 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
203 commit a11e06965ec91270c51853407ff1261d3c740386
204 Author: Igor Lisitsin <igor@emcraft.com>
205 Date: Wed Mar 28 19:06:19 2007 +0400
207 Extend POST support for PPC440
209 Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
211 Signed-off-by: Igor Lisitsin <igor@emcraft.com>
214 commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
215 Author: Heiko Schocher <hs@pollux.denx.de>
216 Date: Fri Jun 22 19:11:54 2007 +0200
218 [PCS440EP] upgrade the PCS440EP board:
219 - Show on the Status LEDs, some States of the board.
220 - Get the MAC addresses from the EEProm
222 - use the CF on the board.
223 - check the U-Boot image in the Flash with a SHA1
225 - use dynamic TLB entries generation for the SDRAM
227 Signed-off-by: Heiko Schocher <hs@denx.de>
229 commit 3a1f5c81b0b9557817a789bece839905581c2205
230 Author: Stefan Roese <sr@denx.de>
231 Date: Fri Jun 22 16:58:40 2007 +0200
233 ppc4xx: Fix problem with extended program_tlb() funtion
235 The recently extended program_tlb() function had a problem when
236 multiple TLB's had to be setup (for example with 512MB of SDRAM). The
237 virtual address was not incremented. This patch fixes this issue
238 and is tested on Katmai with 512MB SDRAM.
240 Signed-off-by: Stefan Roese <sr@denx.de>
242 commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
243 Author: Rafal Jaworowski <raj@semihalf.com>
244 Date: Fri Jun 22 14:58:04 2007 +0200
246 [ppc] Fix build breakage for all non-4xx PowerPC variants.
248 - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
251 commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
252 Author: Wolfgang Denk <wd@denx.de>
253 Date: Wed Jun 20 18:14:24 2007 +0200
255 Coding style cleanup. Refresh CHANGELOG.
257 commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
258 Author: Stefan Roese <sr@denx.de>
259 Date: Tue Jun 19 17:22:44 2007 +0200
261 ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
263 This patch adds a board command to configure the I2C bootstrap EEPROM
264 values. Right now 533 and 667MHz are supported for booting either via NOR
265 or NAND FLASH. Here the usage:
267 => bootstrap 533 nor ;to configure the board for 533MHz NOR booting
268 => bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
270 Signed-off-by: Stefan Roese <sr@denx.de>
272 commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
273 Author: Stefan Roese <sr@denx.de>
274 Date: Tue Jun 19 16:42:31 2007 +0200
276 [ppc4xx] Fix problem with NAND booting on AMCC Acadia
278 The latest changes showed a problem with the location of the NAND-SPL
279 image in the OCM and the init-data area (incl. cache). This patch
282 Signed-off-by: Stefan Roese <sr@denx.de>
284 commit 86ba99e34194394052d24c04dc40d1263d29a26f
285 Author: Stefan Roese <sr@denx.de>
286 Date: Tue Jun 19 16:40:58 2007 +0200
288 [ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
290 Signed-off-by: Stefan Roese <sr@denx.de>
292 commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
293 Author: Stefan Roese <sr@denx.de>
294 Date: Fri Jun 15 11:33:41 2007 +0200
296 [ppc4xx] Change lwmon5 port to work with recent 440 exception rework
298 Now CONFIG_440 has to be defined in all PPC440 board config files.
300 Signed-off-by: Stefan Roese <sr@denx.de>
302 commit efa35cf12d914d4caba942acd5a6c45f217de302
303 Author: Grzegorz Bernacki <gjb@semihalf.com>
304 Date: Fri Jun 15 11:19:28 2007 +0200
306 ppc4xx: Clean up 440 exceptions handling
308 - Introduced dedicated switches for building 440 and 405 images required
309 for 440-specific machine instructions like 'rfmci' etc.
311 - Exception vectors moved to the proper location (_start moved away from
312 the critical exception handler space, which it occupied)
314 - CriticalInput now serviced (with default handler)
316 - MachineCheck properly serviced (added a dedicated handler and return
319 - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
320 unhandled and those not relevant for 4xx were eliminated)
322 - Eliminated Linux leftovers, removed dead code
324 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
325 Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
326 Signed-off-by: Stefan Roese <sr@denx.de>
328 commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
329 Author: Stefan Roese <sr@denx.de>
330 Date: Fri Jun 15 08:18:01 2007 +0200
332 [ppc4xx] Add initial lwmon5 board support
334 This patch adds initial support for the Liebherr lwmon5 board euqipped
335 with an AMCC 440EPx PowerPC.
337 Signed-off-by: Stefan Roese <sr@denx.de>
339 commit 85f737376d5ff3d5f0d45a8b657686326d175307
340 Author: Stefan Roese <sr@denx.de>
341 Date: Fri Jun 15 07:39:43 2007 +0200
343 [ppc4xx] Extend 44x GPIO setup with default output state
345 The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
346 is extended with the default GPIO output state (level).
348 Signed-off-by: Stefan Roese <sr@denx.de>
350 commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
351 Author: Stefan Roese <sr@denx.de>
352 Date: Thu Jun 14 11:14:32 2007 +0200
354 [ppc4xx] Extend program_tlb() with virtual & physical addresses
356 Now program_tlb() allows to program a TLB (or multiple) with
357 different virtual and physical addresses. With this change, now one
358 physical region (e.g. SDRAM) can be mapped 2 times, once with caches
359 diabled and once with caches enabled.
361 Signed-off-by: Stefan Roese <sr@denx.de>
363 commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
364 Author: Detlev Zundel <dzu@denx.de>
365 Date: Wed May 23 19:02:41 2007 +0200
367 Change 'repeatable' attribute of some commands to sensible values.
369 Most prominently this changes 'erase' to be non-repeatable.
371 Signed-off-by: Detlev Zundel <dzu@denx.de>
373 commit 5afb202093f6a001797db92cf695b93a70ea9ab4
374 Author: Detlev Zundel <dzu@denx.de>
375 Date: Wed May 23 18:47:48 2007 +0200
377 Fix 'run' not to continue after interrupted command
379 Signed-off-by: Detlev Zundel <dzu@denx.de>
381 commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
382 Author: Bartlomiej Sieka <tur@semihalf.com>
383 Date: Fri Jun 8 14:52:22 2007 +0200
385 TQM5200: Add Flat Device Tree support, update default env. accordingly.
387 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
388 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
390 commit 9045f33c023f698660a2e45d1b2194c0711abebc
391 Author: Wolfgang Denk <wd@denx.de>
392 Date: Fri Jun 8 10:24:58 2007 +0200
394 Fix config problems on SC3 board; make ide_reset_timeout work.
396 commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
397 Author: Benoît Monin <bmonin@adeneo.eu>
398 Date: Fri Jun 8 09:55:24 2007 +0200
400 [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
402 Set the correct value in GPIOx_TCR when configuring the gpio
403 with CFG_440_GPIO_TABLE.
405 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
406 Signed-off-by: Stefan Roese <sr@denx.de>
408 commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
409 Author: Wolfgang Denk <wd@denx.de>
410 Date: Wed Jun 6 16:26:56 2007 +0200
412 Coding Style cleanup; generate new CHANGELOG file.
414 Signed-off-by: Wolfgang Denk <wd@denx.de>
416 commit c440bfe6d6d92d66478a7e84402b31f48413617b
417 Author: Stefan Roese <sr@denx.de>
418 Date: Wed Jun 6 11:42:13 2007 +0200
420 ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
422 This patch adds NAND booting support for the AMCC Acadia eval board.
424 Please make sure to configure jumper J7 to position 2-3 when booting
425 from NOR, and to position 1-2 when booting for NAND.
427 I also added a board command to configure the I2C bootstrap EEPROM
428 values. Right now only 267MHz is support for booting either via NOR
429 or NAND FLASH. Here the usage:
431 => bootstrap 267 nor ;to configure the board for 267MHz NOR booting
432 => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
434 Signed-off-by: Stefan Roese <sr@denx.de>
436 commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
437 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
438 Date: Tue Jun 5 12:30:52 2007 -0500
440 mpc8641 image size cleanup
442 e600 does not have a bootpg restriction.
443 Move the version string to beginning of image at fff00000.
444 Resetvec.S is not needed.
445 Update flash copy instructions.
446 Add tftpflash env variable
448 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
449 Signed-off-by: Jon Loeliger <jdl@freescale.com>
451 commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
452 Author: Benoît Monin <bmonin@adeneo.eu>
453 Date: Mon Jun 4 08:36:05 2007 +0200
455 [PATCH] Fix ppc4xx bootstrap letter displayed on startup
457 The attached patch is mainly cosmetic, allowing u-boot to
458 display the correct bootstrap option letter according to the
461 The original patch was extended with 405EZ support by Stefan
464 Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
465 Signed-off-by: Stefan Roese <sr@denx.de>
467 commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
468 Author: Stefan Roese <sr@denx.de>
469 Date: Fri Jun 1 16:18:17 2007 +0200
471 ppc4xx: Add missing file for Bamboo NAND booting support
473 Signed-off-by: Stefan Roese <sr@denx.de>
475 commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
476 Author: Stefan Roese <sr@denx.de>
477 Date: Fri Jun 1 15:58:19 2007 +0200
479 ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
481 This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
482 suggested by AMCC it is not recommended to dynamically change the EBC
483 speed after bootup. So we undo this change to be on the safe side.
485 Signed-off-by: Stefan Roese <sr@denx.de>
487 commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
488 Author: Stefan Roese <sr@denx.de>
489 Date: Fri Jun 1 15:29:04 2007 +0200
491 ppc4xx: Update Sequoia NAND booting support with ECC
493 Signed-off-by: Stefan Roese <sr@denx.de>
495 commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
496 Author: Stefan Roese <sr@denx.de>
497 Date: Fri Jun 1 15:27:11 2007 +0200
499 ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
501 This patch adds NAND booting support for the AMCC Bamboo eval board.
502 Since the NAND-SPL boot image is limited to 4kbytes, this version
503 only supports the onboard 64MBytes of DDR. The DIMM modules can't be
504 supported, since the setup code for I2C DIMM autodetection and
505 configuration is too big for this NAND bootloader.
507 Signed-off-by: Stefan Roese <sr@denx.de>
509 commit 42be56f53c8b107868e6125c8524ae84293e95a7
510 Author: Stefan Roese <sr@denx.de>
511 Date: Fri Jun 1 15:23:04 2007 +0200
513 NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
515 The U-Boot NAND booting support is now extended to support ECC
516 upon loading of the NAND U-Boot image.
518 Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
520 Signed-off-by: Stefan Roese <sr@denx.de>
522 commit a471db07fbb65a841ffc9f4f112562b945230f98
523 Author: Stefan Roese <sr@denx.de>
524 Date: Fri Jun 1 15:19:29 2007 +0200
526 ppc4xx: Prepare Bamboo port for NAND booting support
528 This patch updates the "normal" Bamboo NOR booting port, so
529 that it is compatible with the coming soon NAND booting
532 It also enables the 2nd NAND flash on the Bamboo.
534 Signed-off-by: Stefan Roese <sr@denx.de>
536 commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
537 Author: Stefan Roese <sr@denx.de>
538 Date: Fri Jun 1 15:16:58 2007 +0200
540 ppc4xx: Update in_be32() functions and friends to latest Linux version
542 Signed-off-by: Stefan Roese <sr@denx.de>
544 commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
545 Author: Stefan Roese <sr@denx.de>
546 Date: Fri Jun 1 15:15:12 2007 +0200
548 NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
550 This patch adds hardware ECC support to the NDFC driver. It also
551 changes the register access from using the "simple" in32/out32
552 functions to the in_be32/out_be32 functions, which make sure
553 that the access is correctly synced. This is the only recommended
554 access to SoC registers in the current Linux kernel.
556 Signed-off-by: Stefan Roese <sr@denx.de>
558 commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
559 Author: Stefan Roese <sr@denx.de>
560 Date: Fri Jun 1 15:12:15 2007 +0200
562 NAND: Update nand_ecc.c to latest Linux version
564 This patch updates the nand_ecc code to the latest Linux version.
565 The main reason for this is the more compact code. This makes
566 it possible to include the ECC code into the NAND bootloader
567 image (NAND_SPL) for PPC4xx.
569 Signed-off-by: Stefan Roese <sr@denx.de>
571 commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
572 Author: Stefan Roese <sr@denx.de>
573 Date: Fri Jun 1 15:09:50 2007 +0200
575 ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
577 Signed-off-by: Stefan Roese <sr@denx.de>
579 commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
580 Author: Stefan Roese <sr@denx.de>
581 Date: Fri Jun 1 13:45:24 2007 +0200
583 ppc4xx: Change Luan config file to support ECC
585 With the updated 44x DDR2 driver the Luan board now supports
586 ECC generation and checking.
588 Signed-off-by: Stefan Roese <sr@denx.de>
590 commit 7187db73491c8de0fb56efb5e5134ba5ec443089
591 Author: Stefan Roese <sr@denx.de>
592 Date: Fri Jun 1 13:45:00 2007 +0200
594 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
596 Add config option for 180 degree advance clock control as needed
597 for the AMCC Luan eval board.
599 Signed-off-by: Stefan Roese <sr@denx.de>
601 commit ee1529838abbfaa35f14e3ffbeaaba693159475f
602 Author: Wolfgang Denk <wd@denx.de>
603 Date: Thu May 31 17:20:09 2007 +0200
605 Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
607 Signed-off-by: Wolfgang Denk <wd@denx.de>
609 commit 7049288fb1f16f1b317140226cdebd07bd416395
610 Author: Bartlomiej Sieka <tur@semihalf.com>
611 Date: Sun May 27 17:26:46 2007 +0200
613 Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
615 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
617 commit 4520fd4d2c450da49637216aa0e53739b61c60ac
618 Author: Bartlomiej Sieka <tur@semihalf.com>
619 Date: Sun May 27 17:06:36 2007 +0200
621 Motion-PRO: Add support for redundant environment.
623 Enable redundant environment, add a MTD partition for it; also add env.
624 variable command for passing MTD partitions to the kernel command line.
626 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
627 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
629 commit a26eabeec31746f06d309103690892805696e344
630 Author: Bartlomiej Sieka <tur@semihalf.com>
631 Date: Sun May 27 17:05:11 2007 +0200
633 Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
635 Allow passing longer command line to the kernel - useful especially
636 for passing MTD partition layout.
638 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
639 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
641 commit 9160b96f71483a116de81c68985e8ee306d36764
642 Author: Bartlomiej Sieka <tur@semihalf.com>
643 Date: Sun May 27 17:04:18 2007 +0200
645 Fix: Add missing NULL termination in strings expanded by macros parser.
647 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
648 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
650 commit 630ec84aef7228fc1dbfb38dec78541403a786cd
651 Author: Bartlomiej Sieka <tur@semihalf.com>
652 Date: Sun May 27 17:03:37 2007 +0200
654 Motion-PRO: Update EEPROM's page write bits and write delay.
656 Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
657 have a page write capability of two bytes", and "This device offers fast (1ms)
658 byte write". Add 3ms of extra delay.
660 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
661 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
663 commit c00125e07c1ebc125bab40e1e18bceed8be0c162
664 Author: Bartlomiej Sieka <tur@semihalf.com>
665 Date: Sun May 27 16:58:45 2007 +0200
667 MPC5XXX, Motion-PRO: Fix PHY initialization problem.
669 After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
670 networking does not function. This commit switches PHY to TX mode by clearing
671 the FX_SEL bit of Mode Control Register. It also reverses commit
672 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
674 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
675 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
677 commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
678 Author: Bartlomiej Sieka <tur@semihalf.com>
679 Date: Sun May 27 16:57:15 2007 +0200
681 Motion-PRO: Add support for the temperature sensor.
683 Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
684 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
686 commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
687 Author: Bartlomiej Sieka <tur@semihalf.com>
688 Date: Sun May 27 16:55:23 2007 +0200
690 Motion-PRO: Add displaying of CPLD revision information during boot.
692 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
693 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
695 commit c99512d6bd3973f01ca2fc4896d829b46e68f150
696 Author: Bartlomiej Sieka <tur@semihalf.com>
697 Date: Sun May 27 16:53:43 2007 +0200
699 MPC5xxx: Change names of defines related to IPB and PCI clocks.
701 Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
702 them does not cause PCI or IPB clocks to run at the specified speed.
703 Instead, they configure divisors used to calculate said clocks. This
704 patch renames the defines according to their real function.
706 Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
707 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
709 commit a11c0b85dc3664bb3c1e781137118730c8f619ab
710 Author: Bartlomiej Sieka <tur@semihalf.com>
711 Date: Sun May 27 16:51:48 2007 +0200
713 Motion-PRO: Add LED support.
715 Signed-off-by: Jan Wrobel <wrr@semihalf.com>
716 Signed-off-by: Marian Balakowicz <m8@semihalf.com>
717 Acked-by: Bartlomiej Sieka <tur@semihalf.com>
719 commit d756894722c888d09a9fa1df8323753772d3dcce
720 Author: Stefan Roese <sr@denx.de>
721 Date: Thu May 24 09:49:00 2007 +0200
723 ppc4xx: Fix small 405EZ OCM initilization bug in start.S
725 As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
726 fixes a small bug in the 405EZ OCM initialization. Thanks for
729 Signed-off-by: Stefan Roese <sr@denx.de>
731 commit 5d4a179013d59a76446462e1eb0a969fba63eb81
732 Author: Stefan Roese <sr@denx.de>
733 Date: Thu May 24 08:22:09 2007 +0200
735 ppc4xx: Update AMCC Acadia support for board revision 1.1
737 This patch updates the Acadia (405EZ) support for the new 1.1 board
738 revision. It also adds support for NAND FLASH via the 4xx NDFC.
740 Please note that the jumper J7 must be in position 2-3 for this
741 NAND support. Position 1-2 is for NAND booting only. NAND booting
742 support will follow later.
744 Signed-off-by: Stefan Roese <sr@denx.de>
746 commit 822d55365bb557e084d0e33625a6dedcc866110b
747 Author: Jon Loeliger <jdl@freescale.com>
748 Date: Wed May 23 14:09:46 2007 -0500
750 Add LIST_86xx MAKEALL target for PowerPC builds.
752 Signed-off-by: Jon Loeliger <jdl@freescale.com>
754 commit 9f0077abd69f7a7c756a915b961037302be3e6f2
755 Author: Stefan Roese <sr@denx.de>
756 Date: Tue May 22 12:48:09 2007 +0200
758 ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
760 Signed-off-by: Stefan Roese <sr@denx.de>
762 commit 6f3dfc139a838b0841c151efe00ad47db2366e79
763 Author: Stefan Roese <sr@denx.de>
764 Date: Tue May 22 12:46:10 2007 +0200
766 ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
768 This patch adds support for 405 PPC's to the 4xx NAND driver
769 ndfc.c. This is in preparation for the new AMCC 405EZ.
771 Signed-off-by: Stefan Roese <sr@denx.de>
773 commit 10603d76767426be803dadd4fb688b97eb69481c
774 Author: Stefan Roese <sr@denx.de>
775 Date: Mon May 21 07:41:22 2007 +0200
777 ppc4xx: Fix problem in 405EZ OCM initialization
779 As spotted by Bruce Adler this patch fixes an initialization problem
782 Signed-off-by: Stefan Roese <sr@denx.de>
784 commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
785 Author: Peter Pearse <peter.pearse@arm.com>
786 Date: Fri May 18 16:47:03 2007 +0100
788 Reduce line lengths to 80 characters max.
790 commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
791 Author: Peter Pearse <peter.pearse@arm.com>
792 Date: Fri May 18 14:34:07 2007 +0100
796 commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
797 Author: Peter Pearse <peter.pearse@arm.com>
798 Date: Fri May 18 14:33:11 2007 +0100
802 commit 255a3577c848706441daee0174543efe205a77f8
803 Author: Kim Phillips <kim.phillips@freescale.com>
804 Date: Wed May 16 16:52:19 2007 -0500
806 Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
808 For all practical u-boot purposes, TSECs don't differ throughout the
809 mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
811 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
813 commit 70124c2602ae2d4c5d3dba05b482d91548242de8
814 Author: Stefano Babic <sbabic@denx.de>
815 Date: Wed May 16 14:49:12 2007 +0200
817 Fix compile problem cause my Microblaze merge
819 Signed-off-by: Stefano Babic <sbabic@denx.de>
821 commit ada4697d0230d6da552867777f98a67ec3ba2579
822 Author: Jeffrey Mann <mannj@embeddedplanet.com>
823 Date: Wed May 16 13:23:10 2007 +0200
825 [PATCH] Run new sequoia boards with an EBC speed of 83MHz
827 Because the Sequoia board does not boot with an EBC faster than 66MHz,
828 the clock divider are changed after the initial boot process.
830 This allows for maximum clocking speeds to be achieved on newer boards.
831 Sequoia boards with 666.66 MHz processors require that the EBC divider
832 be set to 3 in order to start the initial boot process at a slower EBC
833 speed. After the initial boot process, the divider can be set back to 2,
834 which will cause the boards to run at 83.333MHz. This is backward
835 compatible with boards with 533.33 MHz processors, as these boards will
836 already be set with an EBC divider of 2.
838 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
840 commit a7676ea7732f3c596805079fed7e5c9fac652cfc
841 Author: Wolfgang Denk <wd@denx.de>
842 Date: Wed May 16 01:16:53 2007 +0200
844 Minor Coding Style cleanup, update CHANGELOG.
846 Signed-off-by: Wolfgang Denk <wd@denx.de>
848 commit d62f64cc23a940eafe712c776b3249e4160753d1
849 Author: Wolfgang Denk <wd@denx.de>
850 Date: Wed May 16 00:13:33 2007 +0200
852 Coding Style Cleanup, new CHANGELOG
854 commit 3162eb836903c8b247fdc7470dd39bfa6996f495
855 Author: Wolfgang Denk <wd@denx.de>
856 Date: Tue May 15 23:38:05 2007 +0200
858 Minor coding style cleanup.
860 commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
861 Author: mushtaq khan <mushtaq_k@procsys.com>
862 Date: Fri Apr 20 14:23:02 2007 +0530
864 Add driver for S-ATA-controller on Intel processors with South
865 Bridge, ICH-5, ICH-6 and ICH-7.
869 1. Code is divided in to two files. All functions, which are
870 controller specific are kept in "drivers/ata_piix.c" file and
871 functions, which are not controller specific, are kept in
872 "common/cmd_sata.c" file.
874 2. Reading and Writing from the S-ATA drive is done using PIO method.
876 3. Driver can be configured for 48-bit addressing by defining macro
877 CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
880 4. S-ATA read function is hooked to the File system, commands like
881 ext2ls and ext2load file can be used. This has been tested.
883 5. U-Boot command "SATA_init" is added, which initializes the S-ATA
884 controller and identifies the S-ATA drives connected to it.
886 6. U-Boot command "sata" is added, which is used to read/write, print
887 partition table and get info about the drives present. This I have
888 implemented in same way as "ide" command is implemented in U-Boot.
890 7. This driver is for S-ATA in native mode.
892 8. This driver does not support the Native command queuing and
895 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
897 commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
898 Author: mushtaq khan <mushtaq_k@procsys.com>
899 Date: Mon Apr 30 15:57:22 2007 +0530
901 Fixes bug clearing the bss section for i386
904 There is a bug in the code of clearing the bss section for processor
905 i386.(File: cpu/i386/start.S)
906 In the code, bss_start addr (starting addr of bss section) is put into
907 the register %eax, but the code which clears the bss section refers to
908 the addr pointed by %edi.
910 This patch fixes this bug by putting bss_start into %edi register.
912 Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
914 commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
915 Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
916 Date: Mon Apr 30 16:47:28 2007 -0500
918 Add support for BCM5464 Quad Phy
920 Added support for Broadcom's BCM5464 Quad Phy
922 Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
924 commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
925 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
926 Date: Wed May 9 08:10:57 2007 +0800
928 Search the exception table with linear algorithm
930 Search the exception table with linear algorithm instead of
932 Because the exception table might be unsorted.
934 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
936 commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
937 Author: Aubrey.Li <aubrey.adi@gmail.com>
938 Date: Mon May 14 11:47:35 2007 +0800
940 Fix compilation issues on MACOSX
942 Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
943 Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
945 commit 56fd7162985c412317bbf763a225fba23c64fd31
946 Author: Stephen Williams <steve@icarus.com>
947 Date: Tue May 15 07:55:42 2007 -0700
949 Fix for compile of JSE target
951 The attached patch fixes the compile of the JSE board in the
952 denx git as of 14 may 2007. It is an extremely simple patch,
953 it just adds the missing define of CFG_SYSTEMACE_WIDTH.
955 Fix to compile JSE against 20070514 git of u-boot
957 commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
958 Author: Stefan Roese <sr@denx.de>
959 Date: Fri May 11 12:01:49 2007 +0200
961 ppc4xx: Add mtcpr/mfcpr access macros
963 Signed-off-by: Stefan Roese <sr@denx.de>
965 commit 343c48bd84606c4025c8a7c7263fda465d6e284c
966 Author: Stefan Roese <sr@denx.de>
967 Date: Fri May 11 12:01:06 2007 +0200
969 ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
971 Signed-off-by: Stefan Roese <sr@denx.de>
973 commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
974 Author: Piotr Kruszynski <ppk@semihalf.com>
975 Date: Thu May 10 16:55:52 2007 +0200
977 [Motion-PRO] Add MTD and JFFS2 support, also add default partition
980 commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
981 Author: Peter Pearse <peter.pearse@arm.com>
982 Date: Wed May 9 11:42:44 2007 +0100
984 Add the board directory for SMN42
986 commit 160131bf965785419626df6c388729fe0b597992
987 Author: Peter Pearse <peter.pearse@arm.com>
988 Date: Wed May 9 11:41:58 2007 +0100
990 Add the files for the SMN42 board
992 commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
993 Author: Peter Pearse <peter.pearse@arm.com>
994 Date: Wed May 9 11:40:34 2007 +0100
996 Remove the deleted files for the SMN42 patch
998 commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
999 Author: Peter Pearse <peter.pearse@arm.com>
1000 Date: Wed May 9 11:37:56 2007 +0100
1002 New board SMN42 branch
1004 commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
1005 Author: Peter Pearse <peter.pearse@arm.com>
1006 Date: Wed May 9 10:24:38 2007 +0100
1008 Makefile permissions
1010 commit b84289b595731e8851df46e893845cc1322c9b9b
1011 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
1012 Date: Tue May 8 14:17:07 2007 -0500
1014 8641hpcn: Fix Makefile after moving pixis to board/freescale.
1016 The OBJTREE != SRCTREE build scenario was broken.
1019 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1020 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1022 commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
1023 Author: Michal Simek <monstr@monstr.eu>
1024 Date: Tue May 8 15:57:43 2007 +0200
1026 add: reading special purpose registers
1028 commit 1a50f164beb065f360fbddb76029607d6b099698
1029 Author: Michal Simek <monstr@monstr.eu>
1030 Date: Tue May 8 14:52:52 2007 +0200
1032 add: Microblaze V5 exception handling
1034 commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
1035 Author: Michal Simek <monstr@monstr.eu>
1036 Date: Tue May 8 14:39:11 2007 +0200
1038 add: FSL control read and write
1040 commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
1041 Author: Piotr Kruszynski <ppk@semihalf.com>
1042 Date: Tue May 8 13:05:44 2007 +0200
1044 [Motion-PRO] Add support for I2C, EEPROM and RTC.
1046 commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
1047 Author: Bartlomiej Sieka <tur@semihalf.com>
1048 Date: Tue May 8 10:23:56 2007 +0200
1050 [Motion-PRO] Add ATA support. Add CF-booting commands to the default
1053 commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
1054 Author: Bartlomiej Sieka <tur@semihalf.com>
1055 Date: Tue May 8 09:39:12 2007 +0200
1057 [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
1058 eliminates networking problems in Linux (timeouts).
1060 commit 1f1369c34b629be94702684d41d3fddf0f6193e7
1061 Author: Bartlomiej Sieka <tur@semihalf.com>
1062 Date: Tue May 8 09:21:57 2007 +0200
1064 [Motion-PRO] Enable Flat Device Tree support and modify default environment
1065 to allow booting of FDT-expecting kernels.
1067 commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
1068 Author: Michal Simek <monstr@monstr.eu>
1069 Date: Mon May 7 23:58:31 2007 +0200
1071 new: USE_MSR_INTR support
1073 commit 008861a2f3ef2c062744d733787c7e530a1b8761
1074 Author: Bartlomiej Sieka <tur@semihalf.com>
1075 Date: Mon May 7 22:36:15 2007 +0200
1077 [MPC5xxx] There are networking problems on the Motion-PRO board with
1078 current PHY initalization code (tftp timeouts all the time). This commit
1079 temporarily disables PHY initalization sequence to make the networking
1080 operational, until a fix is found.
1082 commit abca901869c3760b6c5fecb825db6c1d91a78a93
1083 Author: Wolfgang Denk <wd@denx.de>
1084 Date: Mon May 7 22:10:36 2007 +0200
1086 Get rid of duplicated file (see include/configs/sbc8560.h instead)
1088 Signed-off-by: Wolfgang Denk <wd@denx.de>
1090 commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
1091 Author: Wolfgang Denk <wd@denx.de>
1092 Date: Mon May 7 22:07:08 2007 +0200
1094 Get rid of duplicated file (see doc/README.SBC8560 instead)
1096 Signed-off-by: Wolfgang Denk <wd@denx.de>
1098 commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
1099 Author: Michal Simek <monstr@monstr.eu>
1100 Date: Mon May 7 19:43:10 2007 +0200
1102 fix: read and write MSR - repair number of parameters
1104 commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
1105 Author: Jeffrey Mann <mannj@embeddedplanet.com>
1106 Date: Mon May 7 19:42:49 2007 +0200
1108 [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
1110 A '3' got cut off in the formatting of the last patch to automatically
1111 change the clock speed of the system clock on sequoia board.
1113 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
1114 Signed-off-by: Stefan Roese <sr@denx.de>
1116 commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
1117 Author: Michal Simek <monstr@monstr.eu>
1118 Date: Mon May 7 19:33:51 2007 +0200
1120 new: fsl interrupt support
1121 FSL_Has_data is connected to INTC.
1123 commit 792032baa7d625e34c981ab6df521911bd8dc861
1124 Author: Michal Simek <monstr@monstr.eu>
1125 Date: Mon May 7 19:30:12 2007 +0200
1127 fix: interrupt handler
1130 commit f3f001a341ef185d0f13841be5b5dc3395aacc31
1131 Author: Michal Simek <monstr@monstr.eu>
1132 Date: Mon May 7 19:25:08 2007 +0200
1134 fix: remove asm code
1136 commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
1137 Author: Michal Simek <monstr@monstr.eu>
1138 Date: Mon May 7 19:12:43 2007 +0200
1140 fix: clean interrupt
1142 commit 42efed6130c8fcf7da881385b5427065d2801757
1143 Author: Michal Simek <monstr@monstr.eu>
1144 Date: Mon May 7 17:22:25 2007 +0200
1146 fix: interrupt handler for multiple sources
1148 commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
1149 Author: Michal Simek <monstr@monstr.eu>
1150 Date: Mon May 7 17:11:09 2007 +0200
1152 new: add writing to msr register
1154 commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
1155 Author: Timur Tabi <timur@freescale.com>
1156 Date: Sat May 5 08:12:30 2007 +0200
1158 5xxx: write MAC address to mac-address and local-mac-address
1160 Some device trees have a mac-address property, some have local-mac-address,
1161 and some have both. To support all of these device trees, ftp_cpu_setup()
1162 should write the MAC address to mac-address and local-mac-address, if they
1165 Signed-off-by: Timur Tabi <timur@freescale.com>
1166 Acked-by: Grant Likely <grant.likely@secretlab.ca>
1168 commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
1169 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
1170 Date: Sun Apr 29 14:01:54 2007 +0200
1172 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
1174 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
1175 message. Use PVR to distinguish between the two variants, and print proper CPU
1178 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
1179 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
1180 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1182 commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
1183 Author: Ladislav Michl <ladis@linux-mips.org>
1184 Date: Wed Apr 25 16:01:26 2007 +0200
1186 [PATCH] simplify silent console
1188 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1189 Acked-by: Stefan Roese <sr@denx.de>
1191 commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
1192 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
1193 Date: Mon Apr 23 15:30:39 2007 +0200
1195 [PATCH] Avoid assigning PCI resources from zero address
1197 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
1198 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
1199 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
1200 sentence about "0" being considered an invalid address) -- so, use a reasonable
1201 starting value of 0x1000 (that's what the most Linux archs are using).
1203 Alternatively, one might have fixed the calls to pci_set_region() individually
1204 (some code even seems to have taken care of this issue) but that would have
1205 been a lot more work. :-)
1207 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
1208 Acked-by: Stefan Roese <sr@denx.de>
1210 commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
1211 Author: Jeffrey Mann <mannj@embeddedplanet.com>
1212 Date: Mon Apr 23 14:00:11 2007 +0200
1214 [patch] setenv(...) can delete environmentalvariables
1216 update setenv() function so that entering a NULL value for the
1217 variable's value will delete the environmental variable
1219 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
1220 Acked-by: Stefan Roese <sr@denx.de>
1222 commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
1223 Author: Mike Frysinger <vapier@gentoo.org>
1224 Date: Mon Apr 23 13:54:24 2007 +0200
1226 [patch] use unsigned char in smc91111 driver for mac
1228 the v_mac variable in the smc91111 driver is declared as a signed char ...
1229 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
1230 because when it gets printed out, you get a display like:
1231 0xFFFFFFE0 and that's no good
1233 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1235 commit ffc50f9bb194343c6303517a517708457a5eb6b8
1236 Author: Michal Simek <monstr@monstr.eu>
1237 Date: Sat May 5 18:54:42 2007 +0200
1239 new: FSL and MSR support #2
1241 commit f7e2e0eb0668136305f78bb9c21be79b48a34247
1242 Author: Michal Simek <monstr@monstr.eu>
1243 Date: Sat May 5 18:27:16 2007 +0200
1245 new: FSL and MSR support
1247 commit 2f15278c2eb911c668b4fe562130b78cf554d139
1248 Author: Wolfgang Denk <wd@denx.de>
1249 Date: Sat May 5 18:23:11 2007 +0200
1251 Coding stylke cleanup; update CHANGELOG.
1253 Signed-off-by: Wolfgang Denk <wd@denx.de>
1255 commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
1256 Author: Wolfgang Denk <wd@denx.de>
1257 Date: Sat May 5 18:05:02 2007 +0200
1259 Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
1261 Signed-off-by: Wolfgang Denk <wd@denx.de>
1263 commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
1264 Author: Wolfgang Denk <wd@denx.de>
1265 Date: Sat May 5 17:15:50 2007 +0200
1267 Make "file" command happy with some config.mk files; update CHANGELOG
1269 commit e3b8c78bc2489c27ae020986ef0eaca684866cef
1270 Author: Jeffrey Mann <mannj@embeddedplanet.com>
1271 Date: Sat May 5 08:32:14 2007 +0200
1273 ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
1275 The AMCC Secquoia board has been changed in a new revision from using a
1276 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
1277 indicates the difference. This patch reads that bit and uses the correct
1278 clock speed for the board. This code is backward compatable will all
1279 prior boards. All prior boards will be read as 33.000.
1281 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
1282 Signed-off-by: Stefan Roese <sr@denx.de>
1284 commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
1285 Author: Stefan Roese <sr@denx.de>
1286 Date: Sat May 5 08:29:01 2007 +0200
1288 ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
1290 Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
1291 for the 4k NAND boot image so define bus_frequency to 133MHz here
1292 which is save for the refresh counter setup.
1294 Signed-off-by: Stefan Roese <sr@denx.de>
1296 commit 2f550ab976405300f5b07bf2890800840d0aa05f
1297 Author: Timur Tabi <timur@freescale.com>
1298 Date: Sat May 5 08:12:30 2007 +0200
1300 5xxx: write MAC address to mac-address and local-mac-address
1302 Some device trees have a mac-address property, some have local-mac-address,
1303 and some have both. To support all of these device trees, ftp_cpu_setup()
1304 should write the MAC address to mac-address and local-mac-address, if they
1307 Signed-off-by: Timur Tabi <timur@freescale.com>
1308 Acked-by: Grant Likely <grant.likely@secretlab.ca>
1310 commit a79886590593ba1d667c840caa4940c61639f18f
1311 Author: Thomas Knobloch <knobloch@siemens.com>
1312 Date: Sat May 5 07:04:42 2007 +0200
1314 NAND: Wrong calculation of page number in nand_block_bad()
1316 In case that there is no memory based bad block table available the
1317 function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
1318 nand_block_bad() directly. When parameter 'getchip' is set to zero,
1319 nand_block_bad() will not right shift the offset to calculate the
1320 correct page number.
1322 Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
1323 Signed-off-by: Stefan Roese <sr@denx.de>
1325 commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
1326 Author: Wolfgang Denk <wd@denx.de>
1327 Date: Fri May 4 10:02:33 2007 +0200
1329 Fix initrd length corruption in bootm command.
1331 When using FDT Images, the length of an inital ramdisk was
1332 overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
1334 Patches by Timur Tabi & Johns Daniel.
1336 Signed-off-by: Wolfgang Denk <wd@denx.de>
1338 commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
1339 Author: Kim Phillips <kim.phillips@freescale.com>
1340 Date: Thu May 3 19:43:52 2007 -0500
1342 mpc83xx: fix trivial error in MAKEALL
1344 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1346 commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
1347 Author: Wolfgang Denk <wd@denx.de>
1348 Date: Thu May 3 16:34:41 2007 +0200
1350 Update board configuration for STX GP3SSA board:
1352 Enable hush shell, environment in flash rather in EEPROM,
1353 more user-friendly default environment, etc.
1354 The simple EEPROM environment can be selected easily in the board
1357 Signed-off-by: Wolfgang Denk <wd@denx.de>
1359 commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
1360 Author: Wolfgang Denk <wd@denx.de>
1361 Date: Tue Apr 24 14:37:49 2007 +0200
1363 Cleanup STX GP3SSA code; fix build and compile problems.
1365 commit 35171dc04e028ecacc23ad916a66295472555dbf
1366 Author: Dan Malek <dan@embeddedalley.com>
1367 Date: Fri Jan 5 09:15:34 2007 +0100
1369 Add support for STX GP3SSA (stxssa) Board
1371 Signed-off-by Dan Malek, <dan@embeddedalley.com>
1373 commit ffa621a0d12a1ccd81c936c567f8917a213787a8
1374 Author: Andy Fleming <afleming@freescale.com>
1375 Date: Sat Feb 24 01:08:13 2007 -0600
1377 Cleaned up some 85xx PCI bugs
1379 * Cleaned up the CDS PCI Config Tables and added NULL entries to
1381 * Fixed PCIe LAWBAR assignemt to use the cpu-relative address
1382 * Fixed 85xx PCI code to assign powar region sizes based on the
1383 config values (rather than hard-coding them)
1384 * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
1386 Signed-off-by: Andy Fleming <afleming@freescale.com>
1388 commit 6743105988fc44d5b0d30388c790607835aae7a6
1389 Author: Andy Fleming <afleming@freescale.com>
1390 Date: Mon Apr 23 02:54:25 2007 -0500
1392 Add support for the 8568 MDS board
1394 This included some changes to common files:
1395 * Add 8568 processor SVR to various places
1396 * Add support for setting the qe bus-frequency value in the dts
1397 * Add the 8568MDS target to the Makefile
1399 Signed-off-by: Andy Fleming <afleming@freescale.com>
1401 commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
1402 Author: David Updegraff <dave@cray.com>
1403 Date: Fri Apr 20 14:34:48 2007 -0500
1405 Add support for treating unknown PHYs as generic PHYs.
1407 When bringing up u-boot on new boards, PHY support sometimes gets
1408 neglected. Most PHYs don't really need any special support,
1409 though. By adding a generic entry that always matches if nothing
1410 else does, we can provide support for "unsupported" PHYs for the
1413 The generic PHY driver supports most PHYs, including gigabit.
1415 Signed-off-by: David Updegraff <dave@cray.com>
1416 Signed-off-by: Andy Fleming <afleming@freescale.com>
1418 commit a75af9bfd8fff0499efdbb90601cec5a2afef117
1419 Author: James Yang <James.Yang@freescale.com>
1420 Date: Wed Feb 7 15:28:04 2007 -0600
1422 Conditionalize 8641 Rev1.0 MCM workarounds
1424 Signed-off-by: James Yang <James.Yang@freescale.com>
1425 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1427 commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
1428 Author: Timur Tabi <timur@freescale.com>
1429 Date: Mon Apr 30 13:59:50 2007 -0500
1431 Fix memory initialization on MPC8349E-mITX
1433 Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
1434 This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
1435 on some ITX boards, notably those with a revision 3.1 CPU.
1437 Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
1438 ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
1440 Signed-off-by: Timur Tabi <timur@freescale.com>
1441 Acked-by: Michael Benedict <MBenedict@twacs.com>
1442 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1444 commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
1445 Author: Kim Phillips <kim.phillips@freescale.com>
1446 Date: Mon Apr 30 15:26:21 2007 -0500
1448 mpc83xx: replace elaborate boottime verbosity with 'clocks' command
1450 and fix CPU: to align with Board: display text.
1452 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1454 commit c1ab82669d9525998c34e802a12cad662723f22a
1455 Author: James Yang <James.Yang@freescale.com>
1456 Date: Fri Mar 16 13:02:53 2007 -0500
1458 Rewrote picos_to_clk() to avoid rounding errors.
1459 Clarified that conversion is to DRAM clocks rather than platform clocks.
1460 Made function static to spd_sdram.c.
1462 Signed-off-by: James Yang <James.Yang@freescale.com>
1463 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1465 commit 8b39501d28754e72726ce7fb02310e56dbdf116a
1466 Author: Stefan Roese <sr@denx.de>
1467 Date: Sun Apr 29 14:13:01 2007 +0200
1469 ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
1471 Signed-off-by: Stefan Roese <sr@denx.de>
1473 commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
1474 Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
1475 Date: Sun Apr 29 14:01:54 2007 +0200
1477 [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
1479 MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
1480 message. Use PVR to distinguish between the two variants, and print proper CPU
1483 Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
1484 Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
1485 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
1487 commit 5c5d3242935cf3543af01142627494434834cf98
1488 Author: Kim Phillips <kim.phillips@freescale.com>
1489 Date: Wed Apr 25 12:34:38 2007 -0500
1491 mpc83xx: minor fixups for 8313rdb introduction
1493 commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
1494 Author: Ladislav Michl <ladis@linux-mips.org>
1495 Date: Wed Apr 25 16:01:26 2007 +0200
1497 [PATCH] simplify silent console
1499 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
1500 Acked-by: Stefan Roese <sr@denx.de>
1502 commit 144876a380f5756f57412caf74c1d6dc201dd796
1503 Author: Michal Simek <monstr@monstr.eu>
1504 Date: Tue Apr 24 23:01:02 2007 +0200
1506 [PATCH] MTD partition support, JFFS2 support
1508 commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
1509 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1510 Date: Tue Apr 24 14:03:45 2007 +0200
1512 ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
1514 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
1516 commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
1517 Author: Andy Fleming <afleming@freescale.com>
1518 Date: Mon Apr 23 02:37:47 2007 -0500
1520 Reworked 85xx speed detection code
1522 Changed the code to read the registers and calculate the clock
1523 rates, rather than using a "switch" statement.
1525 Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
1527 Signed-off-by: Andy Fleming <afleming@freescale.com>
1529 commit 81f481ca708ed6a56bf9c410e3191dbad581c565
1530 Author: Andy Fleming <afleming@freescale.com>
1531 Date: Mon Apr 23 02:24:28 2007 -0500
1535 * Add support to the Makefile
1536 * Add 8544 configuration support to the tsec driver
1537 * Add 8544 SVR numbers to processor.h
1539 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1540 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1542 commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
1543 Author: Andy Fleming <afleming@freescale.com>
1544 Date: Fri Feb 23 17:12:25 2007 -0600
1546 Support 1G size on 8548
1548 e500v2 and newer cores support 1G page sizes.
1550 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1551 Signed-off-by: Andy Fleming <afleming@freescale.com>
1553 commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
1554 Author: Andy Fleming <afleming@freescale.com>
1555 Date: Fri Feb 23 17:11:16 2007 -0600
1557 Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
1559 The other pagesz constants use one letter to specify order of
1560 magnitude. Also change the one reference to it in mpc8548cds/init.S
1562 Signed-off-by: Andy Fleming <afleming@freescale.com>
1564 commit 1f9a318cea14272edd10d63739e2d326c90f430e
1565 Author: Andy Fleming <afleming@freescale.com>
1566 Date: Fri Feb 23 16:28:46 2007 -0600
1568 Only set ddrioovcr for 8548 rev1.
1570 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1571 Signed-off-by: Andy Fleming <afleming@freescale.com>
1573 commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
1574 Author: Andy Fleming <afleming@freescale.com>
1575 Date: Sat Feb 24 01:16:45 2007 -0600
1577 Tweak DDR ECC error counter
1579 Enable single-bit error counter when memory was cleared by ddr controller.
1581 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1582 Signed-off-by: Andy Fleming <afleming@freescale.com>
1584 commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
1585 Author: Timur Tabi <timur@freescale.com>
1586 Date: Mon Feb 12 13:34:55 2007 -0600
1588 85xx: write MAC address to mac-address and local-mac-address
1590 Some device trees have a mac-address property, some have local-mac-address,
1591 and some have both. To support all of these device trees, ftp_cpu_setup()
1592 should write the MAC address to mac-address and local-mac-address, if they
1595 Signed-off-by: Timur Tabi <timur@freescale.com>
1597 commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
1598 Author: Andy Fleming <afleming@freescale.com>
1599 Date: Mon Apr 23 01:44:44 2007 -0500
1601 Some 85xx cpu cleanups
1603 * Cleaned up the TSR[WIS] clearing
1604 * Cleaned up DMA initialization
1606 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1607 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1608 Acked-by: Andy Fleming <afleming@freescale.com>
1610 commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
1611 Author: Andy Fleming <afleming@freescale.com>
1612 Date: Mon Apr 23 01:32:22 2007 -0500
1614 Add cpu support for the 8544
1616 Recognize new SVR values, and add a few register definitions
1618 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1619 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1620 Acked-by: Andy Fleming <afleming@freescale.com>
1622 commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
1623 Author: Jon Loeliger <jdl@freescale.com>
1624 Date: Wed Apr 11 16:51:02 2007 -0500
1626 Add MPC8544DS basic port board files.
1628 Add board port under new board/freescale directory
1629 structure and reuse existing PIXIS FPGA support there.
1631 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1632 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1634 commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
1635 Author: Jon Loeliger <jdl@freescale.com>
1636 Date: Wed Apr 11 16:50:57 2007 -0500
1638 Add MPC8544DS main configuration file.
1640 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1641 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1643 commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
1644 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
1645 Date: Wed Dec 27 22:07:15 2006 +0300
1647 Fix PCI I/O space mapping on Freescale MPC85x0ADS
1649 The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
1650 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
1651 describing the local address window used for the PCI I/O space accesses -- fix
1652 this and carry over the necessary changes into the MPC8560ADS code since the
1653 PCI I/O space mapping was also broken for this board (by the earlier commit
1654 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
1655 the PCI I/O space must be mapped to all the MPC85xx board config. headers.
1657 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
1659 board/mpc8540ads/init.S | 4 ++--
1660 board/mpc8560ads/init.S | 4 ++--
1661 include/configs/MPC8540ADS.h | 5 ++---
1662 include/configs/MPC8541CDS.h | 2 +-
1663 include/configs/MPC8548CDS.h | 2 +-
1664 include/configs/MPC8560ADS.h | 8 ++++----
1665 6 files changed, 12 insertions(+), 13 deletions(-)
1667 commit 96629cbabdb727d4a5e62542deefc01d498db6dc
1668 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
1669 Date: Tue Dec 5 16:42:30 2006 +0800
1671 u-boot: Fix e500 v2 core reset bug
1673 The following patch fixes the e500 v2 core reset bug.
1674 For e500 v2 core, a new reset control register is added to reset the
1677 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
1679 commit 63247a5acd58032e6cf33f525bc3923b467bac88
1680 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
1681 Date: Wed Dec 20 11:01:00 2006 +0800
1683 u-boot: v2: Remove the fixed TLB and LAW entrynubmer
1685 Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
1686 entry number to control the loop. This can reduce the potential risk
1687 for the 85xx processor increasing its TLB adn LAW entry number.
1689 Signed-off-by: Swarthout Edward <swarthout@freescale.com>
1690 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
1692 commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
1693 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
1694 Date: Mon Dec 18 17:01:04 2006 +0800
1696 u-boot: Fix the 85xxcds tsec bug
1698 Fix the 85xxcds tsec bug.
1699 When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
1701 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
1703 commit 7337b237ffc4aaf1b9467024fe472a880d852598
1704 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
1705 Date: Fri Dec 15 14:43:31 2006 +0800
1707 u-boot: Fix CPU2 errata on MPC8548CDS board
1709 This patch apply workaround of CPU2 errata on MPC8548CDS board.
1711 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
1713 commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
1714 Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
1715 Date: Mon Dec 18 16:25:15 2006 +0800
1717 u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
1719 This patch disables MPC8548CDS 2T_TIMING for DDR by default.
1721 Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
1723 commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
1724 Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
1725 Date: Thu Dec 14 14:14:55 2006 +0800
1727 u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
1729 Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
1731 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
1733 commit 96b8a05432f346f36493535c85320b70ec9c7c1b
1734 Author: Scott Wood <scottwood@freescale.com>
1735 Date: Mon Apr 16 14:54:15 2007 -0500
1737 mpc83xx: Add MPC8313ERDB support.
1739 Signed-off-by: Scott Wood <scottwood@freescale.com>
1741 commit 49ea3b6eafe606285ae4d5c378026153dde53200
1742 Author: Scott Wood <scottwood@freescale.com>
1743 Date: Mon Apr 16 14:34:21 2007 -0500
1745 mpc83xx: Add generic PCI setup code.
1747 Board code can now request the generic setup code rather than having to
1748 copy-and-paste it for themselves. Boards should be converted to use this
1749 once they're tested with it.
1751 Signed-off-by: Scott Wood <scottwood@freescale.com>
1753 commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
1754 Author: Scott Wood <scottwood@freescale.com>
1755 Date: Mon Apr 16 14:34:19 2007 -0500
1757 mpc83xx: Add 831x support to speed.c.
1759 Signed-off-by: Scott Wood <scottwood@freescale.com>
1761 commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
1762 Author: Scott Wood <scottwood@freescale.com>
1763 Date: Mon Apr 16 14:34:18 2007 -0500
1765 mpc83xx: Add 831x support to global_data.h
1767 Signed-off-by: Scott Wood <scottwood@freescale.com>
1769 commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
1770 Author: Scott Wood <scottwood@freescale.com>
1771 Date: Mon Apr 16 14:34:16 2007 -0500
1773 mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
1775 Rather than misleadingly define PVR_83xx as the specific type of 83xx
1776 being built for, the PVR of each core revision is defined. checkcpu() now
1777 prints the core that it detects, rather than aborting if it doesn't find
1778 what it thinks it wants.
1780 Signed-off-by: Scott Wood <scottwood@freescale.com>
1782 commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
1783 Author: Scott Wood <scottwood@freescale.com>
1784 Date: Mon Apr 16 14:34:15 2007 -0500
1786 mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
1788 Signed-off-by: Scott Wood <scottwood@freescale.com>
1790 commit d87c57b201b4572d16f1b642998faa00c9912b16
1791 Author: Scott Wood <scottwood@freescale.com>
1792 Date: Mon Apr 16 14:31:55 2007 -0500
1794 mpc83xx: Add register definitions for MPC831x.
1796 Signed-off-by: Scott Wood <scottwood@freescale.com>
1798 commit 7fc4c71a143be8666d70803fb25ae60379c95622
1799 Author: Stefan Roese <sr@denx.de>
1800 Date: Mon Apr 23 15:39:59 2007 +0200
1804 Signed-off-by: Stefan Roese <sr@denx.de>
1806 commit 38257988abfe74d459ca2ad748b109ca04e4efe1
1807 Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
1808 Date: Mon Apr 23 15:30:39 2007 +0200
1810 [PATCH] Avoid assigning PCI resources from zero address
1812 If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
1813 core complains and IDE drivers fails to work. Also, assigning zero to a BAR
1814 was illegal according to PCI 2.1 (the later revisions seem to have excluded the
1815 sentence about "0" being considered an invalid address) -- so, use a reasonable
1816 starting value of 0x1000 (that's what the most Linux archs are using).
1818 Alternatively, one might have fixed the calls to pci_set_region() individually
1819 (some code even seems to have taken care of this issue) but that would have
1820 been a lot more work. :-)
1822 Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
1823 Acked-by: Stefan Roese <sr@denx.de>
1825 commit afb903a2eb9436baa9270ccc0c27082d86497d89
1826 Author: Jeffrey Mann <mannj@embeddedplanet.com>
1827 Date: Mon Apr 23 14:00:11 2007 +0200
1829 [patch] setenv(...) can delete environmentalvariables
1831 update setenv() function so that entering a NULL value for the
1832 variable's value will delete the environmental variable
1834 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
1835 Acked-by: Stefan Roese <sr@denx.de>
1837 commit 36f104e5caa747d568eff26b369565af57c2ffa6
1838 Author: Mike Frysinger <vapier@gentoo.org>
1839 Date: Mon Apr 23 13:54:24 2007 +0200
1841 [patch] use unsigned char in smc91111 driver for mac
1843 the v_mac variable in the smc91111 driver is declared as a signed char ...
1844 this causes problems when one of the bytes in the MAC is "signed" like 0xE0
1845 because when it gets printed out, you get a display like:
1846 0xFFFFFFE0 and that's no good
1848 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1850 commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
1851 Author: Stefan Roese <sr@denx.de>
1852 Date: Mon Apr 23 12:00:22 2007 +0200
1854 Remove BOARDLIBS usage completely
1856 Signed-off-by: Stefan Roese <sr@denx.de>
1858 commit 32556443840f127170e4baa8bdd5b567039f6c36
1859 Author: Michal Simek <monstr@monstr.eu>
1860 Date: Sat Apr 21 21:07:22 2007 +0200
1862 [PATCH] SystemACE support for Microblaze
1864 commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
1865 Author: Michal Simek <monstr@monstr.eu>
1866 Date: Sat Apr 21 21:02:40 2007 +0200
1868 16bit read/write little endian
1870 commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
1871 Author: Michal Simek <monstr@monstr.eu>
1872 Date: Sat Apr 21 20:53:31 2007 +0200
1874 Change ML401 parameters - Xilinx BSP
1876 commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
1877 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
1878 Date: Wed Feb 28 05:37:29 2007 -0600
1880 mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
1882 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
1884 commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
1885 Author: Zhang Wei <wei.zhang@freescale.com>
1886 Date: Fri Jan 19 10:42:37 2007 +0800
1888 Enable LAWs for MPC8641 PCI-Ex2.
1890 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
1891 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1893 commit bd7851ce1e1f140665b520026abf1042968b1102
1894 Author: Jon Loeliger <jdl@freescale.com>
1895 Date: Fri Apr 20 14:12:26 2007 -0500
1897 mpc86xx; Write MAC address to mac-address and local-mac-address
1899 Some device trees have a mac-address property, some have local-mac-address,
1900 and some have both. To support all of these device trees, ftp_cpu_setup()
1901 should write the MAC address to mac-address and local-mac-address, if they
1904 Signed-off-by: Timur Tabi <timur@freescale.com>
1905 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1907 commit 7dbdf28b8bd855a8530dc3292e4982575a197060
1908 Author: Jon Loeliger <jdl@freescale.com>
1909 Date: Fri Apr 20 14:11:38 2007 -0500
1911 mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
1913 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
1914 Signed-off-by: Jon Loeliger <jdl@freescale.com>
1916 commit 14da5f7675bbb427c469e3f45006e027b6e21db9
1917 Author: Wolfgang Denk <wd@denx.de>
1918 Date: Fri Apr 20 17:43:28 2007 +0200
1920 Cleanup compiler warnings, update CHANGELOG
1922 Signed-off-by: Wolfgang Denk <wd@denx.de>
1924 commit 6923565db12af34fd5e02d354ee65a8c78ac460f
1925 Author: Detlev Zundel <dzu@denx.de>
1926 Date: Fri Apr 20 12:01:47 2007 +0200
1928 Fix breakage of NC650 board with respect to nand support.
1930 Signed-off-by: Detlev Zundel <dzu@denx.de>
1932 commit 39f23cd90947639ac278a18ff277ec786b5ac167
1933 Author: Domen Puncer <domen.puncer@telargo.com>
1934 Date: Fri Apr 20 11:13:16 2007 +0200
1936 [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
1938 G2 core reference manual says decrementer and time base
1939 are decreasing/increasing once every 4 bus clock cycles.
1940 Lets fix it, so time in Linux won't run twice as fast
1942 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
1943 Acked-by: Grant Likely <grant.likely@secretlab.ca>
1945 commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
1946 Author: Gerald Van Baren <vanbaren@cideas.com>
1947 Date: Thu Apr 19 23:14:39 2007 -0400
1949 Fix serious pointer bug with bootm and reserve map.
1951 What was suppose to be a stack variable was declared as a pointer,
1952 overwriting random memory.
1953 Also moved the libfdt.a requirement into the main Makefile. That is
1956 commit d21686263574e95cb3e9e9b0496f968b1b897fdb
1957 Author: Stefan Roese <sr@denx.de>
1958 Date: Thu Apr 19 09:53:52 2007 +0200
1960 ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
1962 Previous versions used full wait states for the chip select #1 which
1963 is connected to the Xilinix SystemACE controller on the AMCC Katmai
1964 evaluation board. This leads to really slow access and therefore low
1965 performance. This patch now sets up the chip select a lot faster
1966 resulting in much better read/write performance of the Linux driver.
1968 Signed-off-by: Stefan Roese <sr@denx.de>
1970 commit 37837828d89084879bee2f2b8c7c68d4695940df
1971 Author: Wolfgang Denk <wd@denx.de>
1972 Date: Wed Apr 18 17:49:29 2007 +0200
1974 Clenaup, update CHANGELOG
1976 Signed-off-by: Wolfgang Denk <wd@denx.de>
1978 commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
1979 Author: Wolfgang Denk <wd@denx.de>
1980 Date: Wed Apr 18 17:20:58 2007 +0200
1984 Signed-off-by: Wolfgang Denk <wd@denx.de>
1986 commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
1987 Author: Wolfgang Denk <wd@denx.de>
1988 Date: Wed Apr 18 17:07:26 2007 +0200
1990 Cleanup, update CHANGELOG
1992 Sigend-off-by: Wolfgang Denk <wd@denx.de>
1994 commit 5f6c732affea9647762d27a4617a2ae64c52dceb
1995 Author: Wolfgang Denk <wd@denx.de>
1996 Date: Wed Apr 18 16:17:46 2007 +0200
2000 commit ad4eb555671d97f96dc56eab55103b1f86874b01
2001 Author: Wolfgang Denk <wd@denx.de>
2002 Date: Wed Apr 18 14:30:39 2007 +0200
2004 MCC200 board: remove warning which is obsolete after PSoC firmware changes
2006 Signed-off-by: Wolfgang Denk <wd@denx.de>
2008 commit 3747a3f010b2b1442dec3e871c69788b6017aaae
2009 Author: Domen Puncer <domen.puncer@telargo.com>
2010 Date: Wed Apr 18 12:11:05 2007 +0200
2012 [PATCH] icecube/lite5200b: document wakeup from low-power support
2014 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
2016 commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
2017 Author: Stefan Roese <sr@denx.de>
2018 Date: Wed Apr 18 12:07:47 2007 +0200
2020 ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
2022 Signed-off-by: Stefan Roese <sr@denx.de>
2024 commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
2025 Author: Stefan Roese <sr@denx.de>
2026 Date: Wed Apr 18 12:05:59 2007 +0200
2028 ppc4xx: Add output for bootrom location to 405EZ ports
2030 Now 405EZ ports also show upon bootup from which boot device
2031 they are configured to boot:
2033 U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
2035 CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
2036 Bootstrap Option E - Boot ROM Location EBC (32 bits)
2037 16 kB I-Cache 16 kB D-Cache
2038 Board: Acadia - AMCC PPC405EZ Evaluation Board
2040 Signed-off-by: Stefan Roese <sr@denx.de>
2042 commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
2043 Author: Peter Pearse <peter.pearse@arm.com>
2044 Date: Tue Apr 17 13:30:33 2007 +0100
2046 Move ppearse to ARM board list
2047 Add Konstantin Kletschke for scb9328.
2048 Signed-off-by: Peter Pearse <peter.pearse@arm.com>
2050 commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
2051 Author: Domen Puncer <domen.puncer@telargo.com>
2052 Date: Mon Apr 16 14:00:13 2007 +0200
2054 [PATCH] icecube/lite5200b: wakeup from low-power support
2056 U-Boot part of Lite5200b low power mode support.
2057 Puts SDRAM out of self-refresh and transfers control to
2058 address saved at physical 0x0.
2060 Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
2061 Acked-by: Grant Likely <grant.likely@secretlab.ca>
2063 commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
2064 Author: Gerald Van Baren <vanbaren@cideas.com>
2065 Date: Sun Apr 15 13:54:26 2007 -0400
2067 Fix the ft_cpu_setup() property settings.
2069 Use "setter" functions instead of flags, cleaner and more flexible.
2070 It also fixes the problem noted by Timur Tabi that the ethernet MAC
2071 addresses were all being set incorrectly to the same MAC address.
2073 commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
2074 Author: Gerald Van Baren <vanbaren@cideas.com>
2075 Date: Sat Apr 14 22:51:24 2007 -0400
2077 Improve the bootm command for CONFIG_OF_LIBFDT
2079 In bootm, create the "/chosen" node only if it doesn't already exist
2080 (better matches the previous behavior).
2081 Update for proper reserved memory map handling for initrd.
2083 commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
2084 Author: Gerald Van Baren <vanbaren@cideas.com>
2085 Date: Sat Apr 14 22:46:41 2007 -0400
2087 Add some utilities to manipulate the reserved memory map.
2089 commit 8048cdd56f04a756eeea4951f402bf5cc33785db
2090 Author: Wolfgang Denk <wd@denx.de>
2091 Date: Sat Apr 14 21:16:54 2007 +0200
2095 commit 8e6875183cdca91c134408d119d4abcd48ef6856
2096 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2097 Date: Sun Dec 17 18:56:46 2006 +0100
2099 AVR32: Enable MMC support
2101 Set up the portmux for the MMC interface and enable the MMC driver
2102 along with support for DOS partitions, ext2 and FAT filesystems.
2104 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2106 commit fc26c97bb6df41b4a95662c34054fe912387bf38
2107 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2108 Date: Fri Jan 20 10:03:53 2006 +0100
2112 Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
2114 The AT91 ARM-based CPUs use basically the same hardware, so it should
2115 be possible to share this driver, but no effort has been made so far.
2117 Hardware documentation can be found in the AT32AP7000 data sheet,
2118 which can be downloaded from
2120 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
2122 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2124 commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
2125 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2126 Date: Sun Dec 17 18:55:37 2006 +0100
2128 AVR32: Add clk and gpio infrastructure for mmci
2130 Implement functions for configuring the mmci pins, as well as
2131 functions for getting the clock rate of the mmci controller.
2133 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2135 commit 7fac3f69e9f05c5e5326681976c35d129324c4de
2136 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2137 Date: Sun Dec 17 18:53:56 2006 +0100
2139 Enable partition support with MMC
2141 Include implementations of init_part() and get_partition_info() when
2144 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2146 commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
2147 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2148 Date: Sun Dec 17 17:14:30 2006 +0100
2150 AVR32: Enable networking
2152 Implement MACB initialization for AVR32 and ATSTK1000, and turn
2153 everything on, including the MACB driver.
2155 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2157 commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
2158 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2159 Date: Fri Jan 20 10:03:34 2006 +0100
2161 Atmel MACB ethernet driver
2163 Driver for the Atmel MACB on-chip ethernet controller.
2165 This driver has been tested on the ATSTK1000 board with a AT32AP7000
2166 CPU. It should probably work on AT91SAM926x as well with some minor
2169 Hardware documentation can be found in the AT32AP7000 data sheet,
2170 which can be downloaded from
2172 http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
2174 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2176 commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
2177 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2178 Date: Sun Dec 17 16:56:14 2006 +0100
2180 AVR32: Add clk and gpio infrastructure for macb0 and macb1
2182 Implement functions for configuring the macb0 and macb1 pins, as
2183 well as functions for getting the clock rate of the various
2184 busses the macb ethernet controllers are connected to.
2186 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2188 commit d5acb95b16a0a74c643524342c3437e765426d05
2189 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2190 Date: Sun Dec 17 15:39:15 2006 +0100
2192 AVR32: Implement simple DMA memory allocator
2194 Implement dma_alloc_coherent() which returns cache-aligned
2197 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2199 commit 91975b0fea773c9e681fea8cf3349669f27685ee
2200 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2201 Date: Sun Dec 17 15:46:02 2006 +0100
2203 Import <linux/mii.h> from the Linux kernel
2205 Instead of creating yet another set of MII register definitions
2206 in the macb driver, here's a complete set of definitions for everyone
2209 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2211 commit 1b804b229556a4d862da93c0ec94e79419364b2c
2212 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2213 Date: Wed Mar 21 19:47:36 2007 +0100
2215 AVR32: Include more commands for ATSTK1000
2217 Include the imi, imls and jffs commands sets by default on ATSTK1000.
2218 Also define CONFIG_BOOTARGS to something more useful, define
2219 CONFIG_BOOTCOMMAND and enable autoboot by default.
2221 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2223 commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
2224 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2225 Date: Wed Mar 21 19:44:48 2007 +0100
2227 AVR32: Provide a definition of struct stat
2229 Copy the definition of struct stat from the Linux kernel.
2231 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2233 commit 12f099c08167a7a51aeee623bc16dafd0841271c
2234 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2235 Date: Sun Dec 17 14:46:06 2006 +0100
2237 AVR32: Use initdram() instead of board_init_memories()
2239 Conform to the "standard" interface and use initdram() instead of
2240 board_init_memories() on AVR32. This enables us to get rid of the
2241 sdram_size member of the global_data struct as well.
2243 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2245 commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
2246 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2247 Date: Mon Nov 20 15:53:10 2006 +0100
2249 AVR32: Relocate u-boot to SDRAM
2251 Relocate the u-boot image into SDRAM like everyone else does. This
2252 means that we can handle much larger .data and .bss than we used to.
2254 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2256 commit df548d3c3e2bbc40258713167859ffc2ce99a900
2257 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2258 Date: Sun Nov 19 18:06:53 2006 +0100
2260 AVR32: Resource management rewrite
2262 Rewrite the resource management code (i.e. I/O memory, clock gating,
2263 gpio) so it doesn't depend on any global state. This is necessary
2264 because this code is heavily used before relocation to RAM, so we
2265 can't write to any global variables.
2267 As an added bonus, this makes u-boot's memory footprint a bit smaller,
2268 although some functionality has been left out; all clocks are enabled
2269 all the time, and there's no checking for gpio line conflicts.
2271 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2273 commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
2274 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2275 Date: Sat Nov 18 18:01:13 2006 +0100
2277 AVR32: Clean up memory-map.h for at32ap7000
2279 Convert spaces to tabs (must have missed this one last time around),
2280 sort the entries by address and group them together by bus
2283 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2285 commit 28c699ef69f4b6cdf252e4747b7b590028a88981
2286 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2287 Date: Sat Nov 18 17:32:31 2006 +0100
2289 AVR32: Build position-independent u-boot
2291 Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
2292 position independent. This will make relocation a lot easier.
2294 -mno-init-got means that gcc shouldn't emit code to load the GOT
2295 address into r6 in every function prologue. We do it once and for
2296 all in the early startup assembly code, so enabling this option
2297 makes u-boot a bit faster and smaller.
2299 The assembly parts have always been position-independent, so no code
2300 changes should be necessary.
2302 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2304 commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
2305 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2306 Date: Sat Nov 18 17:24:31 2006 +0100
2308 AVR32: Use avr32-linux- cross-compilation prefix by default
2310 It doesn't really matter which toolchain you use to compile u-boot,
2311 but the avr32-linux one is probably what most people have installed.
2313 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2315 commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
2316 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
2317 Date: Sat Nov 18 17:15:30 2006 +0100
2319 AVR32: Split start_u_boot into board_init_f and board_init_r
2321 Split the avr32 initialization code into a function to run before
2322 relocation, board_init_f and a function to run after relocation,
2323 board_init_r. For now, board_init_f simply calls board_init_r
2326 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
2328 commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
2329 Author: Heiko Schocher <hs@pollux.denx.de>
2330 Date: Sat Apr 14 05:26:48 2007 +0200
2332 [Fix] Set the LED status register on the UC101 for the LXT971 PHY.
2333 clear the Display after reset.
2335 Signed-off-by: Heiko Schocher <hs@denx.de>
2337 commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
2338 Author: Denis Peter <d.peter@mpl.ch>
2339 Date: Fri Apr 13 09:13:33 2007 +0200
2341 [PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
2343 Fix bug introduced by "Fix get_partition_info() parameter error in all
2344 other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
2345 to use diskboot or scsiboot form another device than 0.
2347 Signed-off-by: Denis Peter <d.peter@mpl.ch>
2349 commit 0b94504d22e70f537c17a0d38c87edb6e370977d
2350 Author: Greg Lopp <lopp@pobox.com>
2351 Date: Fri Apr 13 08:02:24 2007 +0200
2353 [PATCH] Fix use of "void *" for block dev read/write buffer pointers
2355 Signed-of-by: Greg Lopp <lopp@pobox.com>
2356 Acked-by: Grant Likely <grant.likely@secretlab.ca>
2358 commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
2359 Author: Xie Xiaobo <r63061@freescale.com>
2360 Date: Fri Mar 9 19:08:25 2007 +0800
2362 Fix two bugs for MPC83xx DDR2 controller SPD Init
2364 There are a few bugs in the cpu/mpc83xx/spd_sdram.c
2365 the first bug is that the picos_to_clk routine introduces a huge
2366 rounding error in 83xx.
2367 the second bug is that the mode register write recovery field is
2368 tWR-1, not tWR >> 1.
2370 commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
2371 Author: Jeffrey Mann <mannj@embeddedplanet.com>
2372 Date: Thu Apr 12 14:15:59 2007 +0200
2374 ppc4xx: Fix i2c divisor calcularion for PPC4xx
2376 This patch fixes changes the i2c_init(...) function to use the function
2377 get_OPB_freq() rather than calculating the OPB speed by
2378 sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
2379 specific per processor. The prior method was not and so was calculating
2380 the wrong speed for some PPC4xx processors.
2382 Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
2383 Signed-off-by: Stefan Roese <sr@denx.de>
2385 commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
2386 Author: Wolfgang Denk <wd@denx.de>
2387 Date: Wed Apr 11 17:25:01 2007 +0200
2391 Signed-off-by: Wolfgang Denk <wd@denx.de>
2393 commit 51056dd9863e6a1bc363afbbe1775c58cd967418
2394 Author: Wolfgang Denk <wd@denx.de>
2395 Date: Wed Apr 11 17:22:55 2007 +0200
2397 Update for SC3 board
2399 * Make IDE timeout configurable through ide_reset_timeout variable.
2400 * Use Newline as "password" string
2401 * Use just a single partition in NAND flash
2403 commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
2404 Author: Haiying Wang <haiying.wang@freescale.com>
2405 Date: Mon Jan 22 12:37:30 2007 -0600
2407 Add PIXIS FPGA support for MPC8641HPCN board.
2409 Move the 8641HPCN's PIXIS code to the new directory
2410 board/freescale/common/ as it will be shared by
2411 future boards not in the same processor family.
2413 Write a "pixis_reset" command that utilizes the FPGA
2414 reset sequencer to support alternate soft-reset options
2415 such as using the "alternate" flash bank, enabling
2416 the watch dog, or choosing different CPU frequencies.
2418 Add documentation for the pixis_reset to README.mpc8641hpcn.
2420 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
2421 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2423 commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
2424 Author: Gerald Van Baren <vanbaren@cideas.com>
2425 Date: Fri Apr 6 14:19:43 2007 -0400
2427 Moved fdt command support code to fdt_support.c
2429 ...in preparation for improving the bootm command's handling of fdt blobs.
2430 Also cleaned up some coding sloppiness.
2432 commit 6679f9299534e488a171a9bb8f9bb891de247aab
2433 Author: Gerald Van Baren <vanbaren@cideas.com>
2434 Date: Fri Apr 6 14:17:14 2007 -0400
2436 libfdt: Make fdt_check_header() public
2438 Changed _fdt_check_header() to fdt_check_header() and made it part of
2439 the interface - it is a useful routine.
2441 Also did some asthetics cleanup to the include files (headers).
2443 commit c0707ce65677650b5ceab0500ee50ae5168afef2
2444 Author: Aubrey Li <aubrey.adi@gmail.com>
2445 Date: Thu Apr 5 18:34:06 2007 +0800
2447 [Blackfin][PATCH] Kill off a bunch of common local prototypes
2449 commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
2450 Author: Aubrey Li <aubrey.adi@gmail.com>
2451 Date: Thu Apr 5 18:33:04 2007 +0800
2453 [Blackfin][PATCH] Fix dynamic CPLB generation issue
2455 commit 0445e3a264251d75b1be45ef713c70726a2952f0
2456 Author: Aubrey Li <aubrey.adi@gmail.com>
2457 Date: Thu Apr 5 18:31:47 2007 +0800
2459 [Blackfin][PATCH] minior cleanup
2461 commit 155fd766573981090e638b493d5857562151862e
2462 Author: Aubrey Li <aubrey.adi@gmail.com>
2463 Date: Thu Apr 5 18:31:18 2007 +0800
2465 [Blackfin][PATCH] Fix copyright and update license
2467 commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
2468 Author: Aubrey Li <aubrey.adi@gmail.com>
2469 Date: Thu Apr 5 18:30:25 2007 +0800
2471 [Blackfin][PATCH] Add BF537 EMAC driver initialization
2473 commit 889256e8604e0c68db1d866d720894dffede9df6
2474 Author: Aubrey Li <aubrey.adi@gmail.com>
2475 Date: Thu Apr 5 18:29:55 2007 +0800
2477 [Blackfin][PATCH] call real the system synchronize instruction
2479 commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
2480 Author: Aubrey Li <aubrey.adi@gmail.com>
2481 Date: Thu Apr 5 18:29:17 2007 +0800
2483 [Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
2485 commit dfeeab2cd680df047e68e723b246adf6f33bb556
2486 Author: Aubrey Li <aubrey.adi@gmail.com>
2487 Date: Thu Apr 5 18:28:34 2007 +0800
2489 [Blackfin][PATCH]: fix flash unaligned copy issue
2491 commit 443feb740584e406efa203af909fe2926608e8d5
2492 Author: Igor Marnat <marny@rambler.ru>
2493 Date: Wed Mar 21 09:55:01 2007 +0300
2495 Update usage of 'nc' in README.NetConsole
2497 Added information about usage of NetConsole on systems where the -l and -p
2498 switches are mutually exclusive.
2500 Signed-off-by: Igor Marnat <marny@rambler.ru>
2501 Signed-off-by: Ben Warren <bwarren@qstreams.com>
2503 commit 31c98a88228021b314c89ebb8104fb6473da4471
2504 Author: Wolfgang Denk <wd@denx.de>
2505 Date: Wed Apr 4 02:09:30 2007 +0200
2507 Minor coding style cleanup.
2509 commit 94abd7c0583ebe01e799b25f451201deeaab550d
2510 Author: Wolfgang Denk <wd@denx.de>
2511 Date: Wed Apr 4 01:49:15 2007 +0200
2515 commit a65c5768e5537530bd1780af3d3fddc3113a163c
2516 Author: Stefan Roese <sr@denx.de>
2517 Date: Mon Apr 2 10:09:30 2007 +0200
2519 ppc4xx: Change SysACE address on Katmai
2521 With this new base address of the Xilinx SystemACE controller
2522 the Linux driver will be easier to adapt, since it can now be
2523 mapped via the "normal" ioremap() call.
2525 Signed-off-by: Stefan Roese <sr@denx.de>
2527 commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
2528 Author: Gerald Van Baren <vanbaren@cideas.com>
2529 Date: Sat Mar 31 14:30:53 2007 -0400
2531 Fix some minor whitespace violations.
2533 commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
2534 Author: Gerald Van Baren <vanbaren@cideas.com>
2535 Date: Sat Mar 31 12:23:51 2007 -0400
2537 Add a flattened device tree (fdt) command (2 of 2)
2539 Modifications to the existing code to support the new fdt command.
2541 commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
2542 Author: Gerald Van Baren <vanbaren@cideas.com>
2543 Date: Sat Mar 31 12:22:10 2007 -0400
2545 Add a flattened device tree (fdt) command (1 of 2)
2547 The fdt command uses David Gibson's libfdt library to manipulate as well
2548 as print the flattened device tree. This patch is the new command,
2549 the second part is the modifications to the existing code.
2551 commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
2552 Author: Gerald Van Baren <vanbaren@cideas.com>
2553 Date: Sat Mar 31 12:13:43 2007 -0400
2555 libfdt: Enhanced and published fdt_next_tag()
2557 Enhanced the formerly private function _fdt_next_tag() to allow stepping
2558 through the tree, used to produce a human-readable dump, and made
2559 it part of the published interface.
2560 Also added some comments.
2562 commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
2563 Author: Gerald Van Baren <vanbaren@cideas.com>
2564 Date: Sat Mar 31 12:05:39 2007 -0400
2566 libfdt: Customizations for use by u-boot.
2568 Changes to David Gibson's original source to fit into u-boot's
2569 environment. No functionality changes.
2571 commit 35748177c64a4a83a00057e93bb33e40278a2a96
2572 Author: Gerald Van Baren <vanbaren@cideas.com>
2573 Date: Sat Mar 31 12:00:56 2007 -0400
2575 libfdt: Import libfdt source (2 of 2)
2577 This adds the applicable libfdt source files (unmodified) and a README
2578 to explain where the source came from.
2580 commit 7cd5da0fe877e7171a4cdd44880bce783132871a
2581 Author: Gerald Van Baren <vanbaren@cideas.com>
2582 Date: Sat Mar 31 11:59:59 2007 -0400
2584 libfdt: Import libfdt source (1 of 2)
2586 This adds the applicable libfdt source files (unmodified) and a README
2587 to explain where the source came from.
2589 commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
2590 Author: Stefan Roese <sr@denx.de>
2591 Date: Sat Mar 31 13:16:23 2007 +0200
2593 ppc4xx: Update Katmai bootstrap command
2595 Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
2598 Signed-off-by: Stefan Roese <sr@denx.de>
2600 commit cabee756a6532986729477c3cc1ea16ef8517ad2
2601 Author: Stefan Roese <sr@denx.de>
2602 Date: Sat Mar 31 13:15:06 2007 +0200
2604 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
2606 Additional RAM information is now printed upon powerup, like
2607 DDR2 frequency and CAS latency.
2609 Signed-off-by: Stefan Roese <sr@denx.de>
2611 commit 60723803431ac75cad085690789e433d5ab9174e
2612 Author: Stefan Roese <sr@denx.de>
2613 Date: Sat Mar 31 08:48:36 2007 +0200
2615 ppc4xx: Change Yucca config file to support ECC
2617 With the updated 44x DDR2 driver the Yucca board now supports
2618 ECC generation and checking.
2620 Signed-off-by: Stefan Roese <sr@denx.de>
2622 commit 490e5730c674b20d708b783a2c5ffd7208f83873
2623 Author: Stefan Roese <sr@denx.de>
2624 Date: Sat Mar 31 08:47:34 2007 +0200
2626 ppc4xx: Fix "bootstrap" command for Katmai board
2628 The board specific "bootstrap" command is now fixed and can
2629 be used for the AMCC Katmai board to configure different
2630 CPU/PLB/OPB frequencies.
2632 Signed-off-by: Stefan Roese <sr@denx.de>
2634 commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
2635 Author: Stefan Roese <sr@denx.de>
2636 Date: Sat Mar 31 08:46:08 2007 +0200
2638 ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
2640 Fix a bug in the auto calibration routine. This driver now runs
2641 more reliable with the tested modules. It's also tested with
2642 167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
2644 Signed-off-by: Stefan Roese <sr@denx.de>
2646 commit 342cd097be1e7affe82f42ab3da220959a699e64
2647 Author: Michal Simek <monstr@monstr.eu>
2648 Date: Fri Mar 30 22:52:09 2007 +0200
2650 [PATCH] Clean include dependence
2652 commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
2653 Author: Michal Simek <monstr@monstr.eu>
2654 Date: Fri Mar 30 22:42:45 2007 +0200
2656 [CLEAN] Remove inefficient Suzaku code
2658 commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
2659 Author: Stefan Roese <sr@denx.de>
2660 Date: Wed Mar 28 15:03:16 2007 +0200
2662 Merge some AMCC make targets to keep the top-level Makefile smaller
2664 Signed-off-by: Stefan Roese <sr@denx.de>
2666 commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
2667 Author: Stefan Roese <sr@denx.de>
2668 Date: Wed Mar 28 14:52:12 2007 +0200
2670 i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
2672 The "old" i2c commands (iprobe, imd...) are now compiled in again,
2673 even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
2676 Signed-off-by: Stefan Roese <sr@denx.de>
2678 commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
2679 Author: Michal Simek <monstr@monstr.eu>
2680 Date: Tue Mar 27 00:32:16 2007 +0200
2682 PATCH: Resolve GPL license problem
2684 commit 1798049522f594013aea29457d46794298c6ae15
2685 Author: Michal Simek <root@monstr.eu>
2686 Date: Mon Mar 26 01:39:07 2007 +0200
2688 Support for XUPV2P board
2690 BSP autoconfig support
2692 commit 0d974d5297349504a2ddfa09314be573b5df320a
2693 Author: Stefan Roese <sr@denx.de>
2694 Date: Sat Mar 24 15:57:09 2007 +0100
2696 [PATCH] Add 4xx GPIO functions
2698 This patch adds some 4xx GPIO functions. It also moves some of the
2699 common code and defines into a common 4xx GPIO header file.
2701 Signed-off-by: Stefan Roese <sr@denx.de>
2703 commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
2704 Author: Stefan Roese <sr@denx.de>
2705 Date: Sat Mar 24 15:55:58 2007 +0100
2707 [PATCH] Small Sequoia cleanup
2709 Signed-off-by: Stefan Roese <sr@denx.de>
2711 commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
2712 Author: Stefan Roese <sr@denx.de>
2713 Date: Sat Mar 24 15:45:34 2007 +0100
2715 [PATCH] Clean up 40EZ/Acadia support
2717 This patch cleans up all the open issue of the preliminary
2720 Signed-off-by: Stefan Roese <sr@denx.de>
2722 commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
2723 Author: Jon Loeliger <jdl@freescale.com>
2724 Date: Tue Dec 12 11:02:20 2006 -0600
2726 Fix 8641HPCN problem with ld version 2.16
2728 (Dot outside sections problem).
2730 This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
2732 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2734 commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
2735 Author: Haiying Wang <haiying.wang@freescale.com>
2736 Date: Thu Dec 7 10:35:55 2006 -0600
2738 Set Rev 2.x 86xx PIC in mixed mode.
2740 Prevent false interrupt from hanging Linux as MSR[EE] is set
2741 to enable interrupts by changing the PIC out of the default
2742 pass through mode into mixed mode.
2744 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
2745 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2747 commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
2748 Author: Jason Jin <jason.jin@freescale.com>
2749 Date: Thu Dec 7 10:32:35 2006 -0600
2751 Add flash cmd function to 8641HPCN ramboot
2753 Also fixes some commmand for 8641 HPCN ramboot case.
2755 Signed-off-by: Jason Jin <jason.jin@freescale.com>
2756 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2758 commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
2759 Author: Ed Swarthout <ed.swarthout@freescale.com>
2760 Date: Thu Dec 7 10:34:14 2006 -0600
2762 Add support for 8641 Rev 2 silicon.
2764 Without this patch, I am unable to get to the prompt on rev 2 silicon.
2765 Only set ddrioovcr for rev1.
2767 Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
2768 Signed-off-by: Jon Loeliger <jdl@freescale.com>
2770 commit 44ba464b99001f8bd1c456a1e9d59726252f707a
2771 Author: Wolfgang Denk <wd@denx.de>
2772 Date: Thu Mar 22 00:13:12 2007 +0100
2774 Code cleanup / re-insert previous Copyright entries.
2776 Signed-off-by: Wolfgang Denk <wd@denx.de>
2778 commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
2779 Author: Wolfgang Denk <wd@denx.de>
2780 Date: Wed Mar 21 23:26:15 2007 +0100
2782 Code cleanup. Update CHANGELOG
2784 commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
2785 Author: Stefan Roese <sr@denx.de>
2786 Date: Wed Mar 21 14:54:29 2007 +0100
2788 ppc4xx: Fix file mode of include/configs/acadia.h
2790 Signed-off-by: Stefan Roese <sr@denx.de>
2792 commit d5f4614c9350d9333e575100fb250aab774d0258
2793 Author: Markus Klotzbuecher <mk@denx.de>
2794 Date: Wed Mar 21 14:41:46 2007 +0100
2796 SPC1920: fix small clock routing bug
2798 Signed-off-by: Markus Klotzbuecher <mk@denx.de>
2800 commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
2801 Author: Stefan Roese <sr@denx.de>
2802 Date: Wed Mar 21 13:39:57 2007 +0100
2804 [PATCH] Add AMCC Acadia (405EZ) eval board support
2806 This patch adds support for the new AMCC Acadia eval board.
2808 Please note that this Acadia/405EZ support is still in a beta stage.
2809 Still lot's of cleanup needed but we need a preliminary release now.
2811 Signed-off-by: Stefan Roese <sr@denx.de>
2813 commit e01bd218b00af73499331a1a701625a852cd286f
2814 Author: Stefan Roese <sr@denx.de>
2815 Date: Wed Mar 21 13:38:59 2007 +0100
2817 [PATCH] Add AMCC PPC405EZ support
2819 This patch adds support for the new AMCC 405EZ PPC. It is in
2820 preparation for the AMCC Acadia board support.
2822 Please note that this Acadia/405EZ support is still in a beta stage.
2823 Still lot's of cleanup needed but we need a preliminary release now.
2825 Signed-off-by: Stefan Roese <sr@denx.de>
2827 commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
2828 Author: Heiko Schocher <hs@pollux.denx.de>
2829 Date: Wed Mar 21 08:45:17 2007 +0100
2831 [PATCH] TQM8272: dont change the bits given from the HRCW
2832 for the SIUMCR and BCR Register.
2833 Fix the calculation for the EEprom Size
2835 Signed-off-by: Heiko Schocher <hs@denx.de>
2837 commit 654589873dbafcf104dff133ce0d03a4506e9cc3
2838 Author: Aubrey Li <aubrey.adi@gmail.com>
2839 Date: Tue Mar 20 18:16:24 2007 +0800
2841 [Blackfin][PATCH] Add BF561 EZKIT board support
2843 commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
2844 Author: Aubrey Li <aubrey.adi@gmail.com>
2845 Date: Mon Mar 19 22:55:58 2007 +0800
2847 [Blackfin][PATCH] minor cleanup
2849 commit 389b6bb50f745bf5038ce030300d8a8512e96f79
2850 Author: Wolfgang Denk <wd@denx.de>
2851 Date: Mon Mar 19 13:10:08 2007 +0100
2853 Remove obsoleted POST files.
2855 Signed-off-by: Wolfgang Denk <wd@denx.de>
2857 commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
2858 Author: Aubrey Li <aubrey.adi@gmail.com>
2859 Date: Mon Mar 19 01:26:11 2007 +0800
2861 [PATCH] Add flash chip M29W320ET/B support
2863 commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
2864 Author: Aubrey Li <aubrey.adi@gmail.com>
2865 Date: Mon Mar 19 01:24:52 2007 +0800
2867 [Blackfin][PATCH] Add BF537 stamp board support
2869 commit 8423e5e31a7235d05a482627315fb11d49c17bd7
2870 Author: Stefan Roese <sr@denx.de>
2871 Date: Fri Mar 16 21:11:42 2007 +0100
2873 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
2875 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
2876 DDR memory are dynamically programmed matching the total size
2877 of the equipped memory (DIMM modules).
2879 Signed-off-by: Stefan Roese <sr@denx.de>
2881 commit 76d1466f918b881cda2d259254761e73885093c2
2882 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2883 Date: Tue Mar 13 13:38:05 2007 +0100
2885 [PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
2886 boards in terms of unification.
2888 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2890 commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
2891 Author: Wolfgang Denk <wd@denx.de>
2892 Date: Tue Mar 13 16:05:55 2007 +0100
2894 Make SC3 board build with 'make O='; use 'addcons' consistently
2895 (SC3 and Jupiter used to use 'addcon' instead).
2897 Signed-off-by: Wolfgang Denk wd@denx.de
2899 commit 8502e30a28e492c756ea2d7df0ace026388fce4b
2900 Author: Heiko Schocher <hs@pollux.denx.de>
2901 Date: Tue Mar 13 09:40:59 2007 +0100
2903 [PATCH] update board config for jupiter Board:
2905 CONFIG_CMDLINE_EDITING,
2906 CFG_ENV_ADDR_REDUND activated
2908 Signed-off-by: Heiko Schocher <hs@denx.de>
2910 commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
2911 Author: Aubrey Li <aubrey.adi@gmail.com>
2912 Date: Mon Mar 12 12:11:55 2007 +0800
2914 [Blackfin][PATCH] minor cleanup
2916 commit bfa5754a58477ac917d21527cd0f079d87cf188e
2917 Author: Aubrey Li <aubrey.adi@gmail.com>
2918 Date: Mon Mar 12 01:42:06 2007 +0800
2920 [Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
2922 commit 8440bb14581a294375c34b91b42512f9753d1130
2923 Author: Aubrey Li <aubrey.adi@gmail.com>
2924 Date: Mon Mar 12 00:25:14 2007 +0800
2926 [Blackfin][PATCH] code cleanup
2928 commit cfc67116a706fd18b8f6a9c11a16753c5626d689
2929 Author: Michal Simek <monstr@monstr.eu>
2930 Date: Sun Mar 11 13:48:24 2007 +0100
2932 [Microblaze][PATCH] part 2
2934 interrupt controller support
2938 board information support
2940 booting image support
2942 adding support for Xilinx ML401
2944 commit 76316a318de91f6184e7c22a10e02d275ade2441
2945 Author: Michal Simek <monstr@monstr.eu>
2946 Date: Sun Mar 11 13:42:58 2007 +0100
2950 interrupt controller support
2954 board information support
2956 booting image support
2958 adding support for Xilinx ML401
2960 commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
2961 Author: Aubrey Li <aubrey.adi@gmail.com>
2962 Date: Sat Mar 10 23:49:29 2007 +0800
2964 [Blackfin][PATCH] code cleanup
2966 commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
2967 Author: Aubrey.Li <aubrey.adi@gmail.com>
2968 Date: Fri Mar 9 13:40:56 2007 +0800
2970 [Blackfin][PATCH-2/2] Common files changed to support bf533 platform
2972 commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
2973 Author: Aubrey.Li <aubrey.adi@gmail.com>
2974 Date: Fri Mar 9 13:38:44 2007 +0800
2976 [Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
2978 commit 992423ab43c2bcf6b704853bd00af77450915e20
2979 Author: Stefan Roese <sr@denx.de>
2980 Date: Thu Mar 8 23:00:08 2007 +0100
2982 ppc4xx: Fix file mode of sequoia.c
2984 Signed-off-by: Stefan Roese <sr@denx.de>
2986 commit eb92f613556800f7483666db09d9a237ad911d4a
2987 Author: Wolfgang Denk <wd@pollux.denx.de>
2988 Date: Thu Mar 8 22:52:51 2007 +0100
2992 commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
2993 Author: John Otken john@softadvances.com <john@softadvances.com>
2994 Date: Thu Mar 8 09:39:48 2007 -0600
2996 ppc4xx: Clear Sequoia/Rainier security engine reset bits
2998 Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
3000 commit 650a330dd2539130c8c324791e2f9f75aed79d4e
3001 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3002 Date: Thu Mar 8 16:26:52 2007 +0100
3004 [PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
3006 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3008 commit d9fc703246840c4b268debf48c334ba55c597dc0
3009 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3010 Date: Thu Mar 8 16:25:47 2007 +0100
3012 [PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
3014 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3016 commit ced5b9029043397348cdc88e0cfcd6b1f629250b
3017 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3018 Date: Thu Mar 8 16:23:11 2007 +0100
3020 [PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
3022 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3024 commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
3025 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3026 Date: Thu Mar 8 16:20:32 2007 +0100
3028 [PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
3030 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3032 commit f9fc6a5852a6335840882fa2111925010eea1abe
3033 Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3034 Date: Wed Mar 7 15:32:01 2007 +0100
3036 fixed ethernet phy configuration for plu405 board
3038 Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
3040 commit 769104c9356594deb2092e204a39c05b33202d6c
3041 Author: Wolfgang Denk <wd@pollux.denx.de>
3042 Date: Thu Mar 8 21:49:27 2007 +0100
3046 commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
3047 Author: Stefan Roese <sr@denx.de>
3048 Date: Thu Mar 8 10:13:16 2007 +0100
3050 [PATCH] Update AMCC Luan 440SP eval board support
3052 The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
3053 inititializition. This includes DDR auto calibration and support
3054 for different DIMM modules, instead of the fixed setup used in
3055 the earlier version.
3057 This patch also enables the cache in FLASH for the startup
3058 phase of U-Boot (while running from FLASH). After relocating to
3059 SDRAM the cache is disabled again. This will speed up the boot
3060 process, especially the SDRAM setup, since there are some loops
3061 for memory testing (auto calibration).
3063 Signed-off-by: Stefan Roese <sr@denx.de>
3065 commit 2f5df47351910a2936c7741cf111855829200943
3066 Author: Stefan Roese <sr@denx.de>
3067 Date: Thu Mar 8 10:10:18 2007 +0100
3069 [PATCH] Update AMCC Yucca 440SPe eval board support
3071 The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
3072 inititializition. This includes DDR auto calibration and support
3073 for different DIMM modules, instead of the fixed setup used in
3074 the earlier version.
3076 Signed-off-by: Stefan Roese <sr@denx.de>
3078 commit 2721a68a9ea91f1e494649ce68b2577261f578e2
3079 Author: Stefan Roese <sr@denx.de>
3080 Date: Thu Mar 8 10:07:18 2007 +0100
3082 ppc4xx: Small AMCC Katmai 440SPe update
3084 Signed-off-by: Stefan Roese <sr@denx.de>
3086 commit df294497479b1dca6dd86318b2a912f72fede0df
3087 Author: Stefan Roese <sr@denx.de>
3088 Date: Thu Mar 8 10:06:09 2007 +0100
3090 ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
3092 Signed-off-by: Stefan Roese <sr@denx.de>
3094 commit 83853178bd36bca6f0f8f1331476620c84a587fc
3095 Author: Ed Swarthout <Ed.Swarthout@freescale.com>
3096 Date: Wed Mar 7 12:14:50 2007 -0600
3098 net - Support ping reply when processing net-loop
3100 Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
3102 This permits the ping command to test the phy interface when the phy
3103 is put in loopback mode (typically by setting register 0 bit 14).
3105 It also allows the port to respond to an external ping when u-boot is
3106 processing some other net command (such as tftp). This is useful when
3107 tftp appears to hang.
3109 Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
3110 Signed-off-by: Ben Warren <bwarren@qstreams.com>
3112 commit fa1aef15bcd47736687be1af544506e90fba545d
3113 Author: Stefan Roese <sr@denx.de>
3114 Date: Wed Mar 7 16:43:00 2007 +0100
3116 [PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
3118 Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
3119 DDR memory are dynamically programmed matching the total size
3120 of the equipped memory (DIMM modules).
3122 Signed-off-by: Stefan Roese <sr@denx.de>
3124 commit e2ebe696818939e2b974628be9c921ea3fe9de13
3125 Author: Stefan Roese <sr@denx.de>
3126 Date: Wed Mar 7 16:39:36 2007 +0100
3128 [PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
3130 This patch fixes a problem that occurs when 2 DIMM's are
3131 used. This problem was first spotted and fixed by Gerald Jackson
3132 <gerald.jackson@reaonixsecurity.com> but this patch fixes the
3133 problem in a little more clever way.
3135 This patch also adds the nice functionality to dynamically
3136 create the TLB entries for the SDRAM (tlb.c). So we should
3137 never run into such problems with wrong (too short) TLB
3138 initialization again on these platforms.
3140 As this feature is new to the "old" 44x SPD DDR driver, it
3141 has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
3143 Signed-off-by: Stefan Roese <sr@denx.de>
3145 commit 39218433983417b9df087976a79e3f80dd5e83d6
3146 Author: Wolfgang Denk <wd@denx.de>
3147 Date: Wed Mar 7 16:33:44 2007 +0100
3149 UC101: fix compiler warnings
3151 commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
3152 Author: Wolfgang Denk <wd@pollux.denx.de>
3153 Date: Wed Mar 7 16:19:46 2007 +0100
3155 HMI1001: fix build error, cleanup compiler warnings.
3157 commit ad5bb451ade552c44bef9119d907929ebc2c126f
3158 Author: Wolfgang Denk <wd@pollux.denx.de>
3159 Date: Tue Mar 6 18:08:43 2007 +0100
3161 Restructure POST directory to support of other CPUs, boards, etc.
3163 commit a5284efd125967675b2e9c6ef7b95832268ad360
3164 Author: Wolfgang Denk <wd@pollux.denx.de>
3165 Date: Tue Mar 6 18:01:47 2007 +0100
3167 Fix HOSTARCH handling.
3168 Patch by Mike Frysinger, Mar 05 2007
3170 commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
3171 Author: Stefan Roese <sr@denx.de>
3172 Date: Tue Mar 6 07:47:04 2007 +0100
3174 [PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
3176 As provided by the AMCC applications team, this patch optimizes the
3177 DDR2 setup for 166MHz bus speed. The values provided are also save
3178 to use on a "normal" 133MHz PLB bus system. Only the refresh counter
3179 setup has to be adjusted as done in this patch.
3181 For this the NAND booting version had to include the "speed.c" file
3182 from the cpu/ppc4xx directory. With this addition the NAND SPL image
3183 will just fit into the 4kbytes of program space. gcc version 4.x as
3184 provided with ELDK 4.x is needed to generate this optimized code.
3186 Signed-off-by: Stefan Roese <sr@denx.de>
3188 commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
3189 Author: Wolfgang Denk <wd@pollux.denx.de>
3190 Date: Sun Mar 4 01:36:05 2007 +0100
3194 commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
3195 Author: Kim Phillips <kim.phillips@freescale.com>
3196 Date: Wed Feb 28 00:02:04 2007 -0600
3198 mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
3200 (cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
3202 commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
3203 Author: Kumar Gala <galak@kernel.crashing.org>
3204 Date: Tue Feb 27 23:51:42 2007 -0600
3206 mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
3208 The config value for:
3216 Were not being used when setting the appropriate register
3224 To allow full config of the SCCR.
3226 Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
3227 that were just bogus.
3229 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3231 commit d51b3cf371cd441030460ef19d36b2924c361b1a
3232 Author: Kim Phillips <kim.phillips@freescale.com>
3233 Date: Thu Feb 22 20:06:57 2007 -0600
3235 mpc83xx: update [local-]mac-address properties on UEC based devices
3237 8360 and 832x weren't updating their [local-]mac-address
3238 properties. This patch fixes that.
3240 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3242 commit 61f4f912acbe60776c5e00df1ec94094ce672957
3243 Author: Timur Tabi <timur@freescale.com>
3244 Date: Tue Feb 13 10:41:42 2007 -0600
3246 mpc83xx: write MAC address to mac-address and local-mac-address
3248 Some device trees have a mac-address property, some have local-mac-address,
3249 and some have both. To support all of these device trees, this patch
3250 updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
3251 This function already updates local-mac-address.
3253 Signed-off-by: Timur Tabi <timur@freescale.com>
3255 commit 22d71a71f57fd5d38b27ac3848e50d790360a598
3256 Author: Kim Phillips <kim.phillips@freescale.com>
3257 Date: Tue Feb 27 18:41:08 2007 -0600
3259 mpc83xx: add command line editing by default
3261 commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
3262 Author: Kim Phillips <kim.phillips@freescale.com>
3263 Date: Wed Feb 14 19:50:53 2007 -0600
3265 mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
3267 Disable G1TXCLK, G2TXCLK h/w buffers. This patch
3268 fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
3270 Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
3272 Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
3273 Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
3275 commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
3276 Author: Xie Xiaobo <r63061@freescale.com>
3277 Date: Wed Feb 14 18:27:17 2007 +0800
3279 mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
3281 The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
3282 it pass DDR/DDR2 compliance tests.
3284 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
3286 commit b110f40bd180c6b560276589beedf753e97c46ce
3287 Author: Xie Xiaobo <r63061@freescale.com>
3288 Date: Wed Feb 14 18:27:06 2007 +0800
3290 mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
3292 MPC8360E rev2.0 have new spridr,and PVR value,
3293 The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
3295 Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
3297 commit 8d172c0f0d85998a256a95b7459a5403a30380ed
3298 Author: Xie Xiaobo <r63061@freescale.com>
3299 Date: Wed Feb 14 18:26:44 2007 +0800
3301 mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
3303 MPC8349E rev3.1 have new spridr,and PVR value,
3304 The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
3306 Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
3308 commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
3309 Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
3310 Date: Wed Jan 31 11:04:19 2007 +0100
3312 mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
3314 Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
3315 which is used to se if an slave will ACK after receiving its address.
3317 Correct i2c probing to use this method as the old method could upset
3318 a slave as it wrote a data byte to it.
3320 Add a small delay in i2c_init() to let the controller
3321 shutdown any ongoing I2C activity.
3323 Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
3325 commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
3326 Author: Timur Tabi <timur@freescale.com>
3327 Date: Wed Jan 31 15:54:29 2007 -0600
3329 mpc83xx: Add support for the MPC8349E-mITX-GP
3331 Add support for the MPC8349E-mITX-GP, a stripped-down version of the
3332 MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
3333 HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
3335 Signed-off-by: Timur Tabi <timur@freescale.com>
3337 commit fab16807adad350f618024350c6950165c247c72
3338 Author: Timur Tabi <timur@freescale.com>
3339 Date: Wed Jan 31 15:54:20 2007 -0600
3341 mpc83xx: Delete sdram_init() for MPC8349E-mITX
3343 There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
3344 never does anything. This patch deletes it.
3346 Signed-off-by: Timur Tabi <timur@freescale.com>
3348 commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
3349 Author: Dave Liu <daveliu@freescale.com>
3350 Date: Fri Jan 19 10:43:26 2007 +0800
3352 mpc83xx: Fix the LAW1/3 bug
3354 The patch solves the alignment problem of the local bus access windows to
3355 render accessible the memory bank and PHY registers of UPC 1 (starting at
3356 0xf801 0000). What we actually did was to adjust the sizes of the bus
3357 access windows so that the base address alignment requirement would be met.
3359 Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
3360 Signed-off-by: Gridish Shlomi <gridish@freescale.com>
3361 Signed-off-by: Dave Liu <daveliu@freescale.com>
3363 commit 97c4b397dce236a7318b304667bf89e59d08b17c
3364 Author: Kim Phillips <kim.phillips@freescale.com>
3365 Date: Tue Jan 30 16:15:31 2007 -0600
3367 mpc83xx: don't hang if watchdog configured on 8360, 832x
3369 don't hang if watchdog configured on 8360, 832x
3371 The watchdog programming model is the same across all 83xx devices;
3372 make the code reflect that.
3374 commit b70047478570e371ce7223be342ce98afea0f7d6
3375 Author: Kim Phillips <kim.phillips@freescale.com>
3376 Date: Tue Jan 30 16:15:21 2007 -0600
3378 mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
3380 protect memcpy to bad address if a local-mac-address is missing from dt
3382 commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
3383 Author: Kim Phillips <kim.phillips@freescale.com>
3384 Date: Tue Jan 30 16:15:04 2007 -0600
3386 mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
3388 make 8360 default environment fdt be 8360 (not 8349)
3390 commit a28899c910024a0226331df07207b1038c300c93
3391 Author: Emilian Medve <Emilian.Medve@freescale.com>
3392 Date: Tue Jan 30 16:14:50 2007 -0600
3394 mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
3396 The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
3397 be used for busy-waiting since it strips the 'volatile' property from
3398 the bd variable. gcc3 was working by pure luck.
3400 This is a follow on patch to "Fix the UEC driver bug of QE"
3402 commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
3403 Author: Kumar Gala <galak@kernel.crashing.org>
3404 Date: Tue Jan 30 14:08:30 2007 -0600
3406 mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
3408 The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
3409 MPC834X class processors. Change the protections from CONFIG_MPC8349 to
3410 CONFIG_MPC834X so they are more generic.
3412 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
3414 commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
3415 Author: Kim Phillips <kim.phillips@freescale.com>
3416 Date: Thu Jan 25 13:40:55 2007 -0600
3418 mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
3420 commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
3421 Author: Kim Phillips <kim.phillips@freescale.com>
3422 Date: Wed Jan 24 17:18:37 2007 -0600
3424 mpc83xx: sort Makefile targets
3426 reordered targets alphabetically
3428 commit 91e25769771c1164ed63ffca0add49f934ae3343
3429 Author: Paul Gortmaker <paul.gortmaker@windriver.com>
3430 Date: Tue Jan 16 11:38:14 2007 -0500
3432 mpc83xx: U-Boot support for Wind River SBC8349
3434 I've redone the SBC8349 support to match git-current, which
3435 incorporates all the MPC834x updates from Freescale since the 1.1.6
3436 release, including the DDR changes.
3438 I've kept all the SBC8349 files as parallel as possible to the
3439 MPC8349EMDS ones for ease of maintenance and to allow for easy
3440 inspection of what was changed to support this board. Hence the SBC8349
3441 U-Boot has FDT support and everything else that the MPC8349EMDS has.
3443 Fortunately the Freescale updates added support for boards using CS0,
3444 but I had to change spd_sdram.c to allow for board specific settings for
3445 the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
3446 default if the board doesn't specify a value.)
3448 Hopefully this should be mergeable as-is and require no whitespace
3449 cleanups or similar, but if something doesn't measure up then let me
3450 know and I'll fix it.
3455 commit 05031db456ab227f3e3752f37b9b812b65bb83ad
3456 Author: Sam Song <samsongshu@yahoo.com.cn>
3457 Date: Thu Dec 14 19:03:21 2006 +0800
3459 mpc83xx: Remove a redundant semicolon in mpc8349itx.c
3461 A redundant semicolon existed in mpc8349itx.c
3464 Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
3466 commit f35f358241c549be3f75cfe2eaa642914275b7ba
3467 Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
3468 Date: Wed Dec 6 21:23:55 2006 -0500
3470 mpc83xx: Put the version (and magic) after the HRCW.
3472 Put the version (and magic) after the HRCW. This puts it in a fixed
3473 location in flash, not at the start of flash but as close as we can get.
3475 Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
3477 commit 48aecd969171a6e99a55fae04933857787f9a5bd
3478 Author: Dave Liu <r63238@freescale.com>
3479 Date: Thu Dec 7 21:14:51 2006 +0800
3481 mpc83xx: Add the MPC832XEMDS board readme
3483 Add the MPC832XEMDS board readme
3485 Signed-off-by: Dave Liu <daveliu@freescale.com>
3487 commit 24c3aca3f1358b113d3215adb5433b156e99f72b
3488 Author: Dave Liu <r63238@freescale.com>
3489 Date: Thu Dec 7 21:13:15 2006 +0800
3491 mpc83xx: Add support for the MPC832XEMDS board
3493 This patch supports DUART, ETH3/4 and PCI etc.
3495 Signed-off-by: Dave Liu <daveliu@freescale.com>
3497 commit e080313c32322e15ab5a18eb896a252858c57284
3498 Author: Dave Liu <r63238@freescale.com>
3499 Date: Thu Dec 7 21:11:58 2006 +0800
3501 mpc83xx: streamline the 83xx immr head file
3503 For better format and style, I streamlined the 83xx head files,
3504 including immap_83xx.h and mpc83xx.h. In the old head files, 1)
3505 duplicated macro definition appear in the both files; 2) the structure
3506 of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
3507 macro definition put inside the each structure. So, I cleaned up the
3508 structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
3509 moved the macro definition to mpc83xx.h, Just like MPC8260.
3513 *streamline the 83xx immr head file
3515 Signed-off-by: Dave Liu <daveliu@freescale.com>
3517 commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
3518 Author: Dave Liu <r63238@freescale.com>
3519 Date: Wed Dec 6 11:38:17 2006 +0800
3521 mpc83xx: Fix the UEC driver bug of QE
3523 The patch prevents the GCC tool chain from striping useful code for
3524 optimization. It will make UEC ethernet driver workable, Otherwise the
3525 UEC will fail in tx when you are using gcc4.x. but the driver can work
3526 when using gcc3.4.3.
3530 *Prevent the GCC from striping code for optimization, Otherwise the UEC
3531 will tx failed when you are using gcc4.x.
3533 Signed-off-by: Dave Liu <daveliu@freescale.com>
3535 commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
3536 Author: Stefan Roese <sr@denx.de>
3537 Date: Thu Mar 1 21:11:36 2007 +0100
3539 [PATCH] Update AMCC Katmai 440SPe eval board support
3541 This patch updates the recently added Katmai board support. The biggest
3542 change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
3545 Please note, that still some problems are left with some memory
3546 configurations. See the driver for more details.
3548 Signed-off-by: Stefan Roese <sr@denx.de>
3550 commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
3551 Author: Stefan Roese <sr@denx.de>
3552 Date: Thu Mar 1 07:03:25 2007 +0100
3554 [PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
3556 Signed-off-by: Stefan Roese <sr@denx.de>
3558 commit ccbc7036648e465697ca298ba51e0e76dda352a0
3559 Author: Wolfgang Denk <wd@pollux.denx.de>
3560 Date: Wed Feb 28 01:28:53 2007 +0100
3562 SC3: fix typo in default environment
3564 commit e344568b1b46af85ec32d815586f91bc115d6223
3565 Author: Sergei Poselenov <sposelenov@emcraft.com>
3566 Date: Tue Feb 27 20:15:30 2007 +0300
3568 MCC200: Fixes for update procedure
3570 - fix logic error in image type handling
3571 - make sure file system images (cramfs etc.) get stored in flash
3572 with image header stripped so they can be mounted through MTD
3574 commit 743571145b37182757d4e688a77860b36ee77573
3575 Author: Wolfgang Denk <wd@pollux.denx.de>
3576 Date: Tue Feb 27 14:26:04 2007 +0100
3580 commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
3581 Author: Sergei Poselenov <sposelenov@emcraft.com>
3582 Date: Tue Feb 27 12:40:16 2007 +0300
3584 MCC200 update - add LCD Progress Indicator
3586 commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
3587 Author: Stefan Roese <sr@denx.de>
3588 Date: Thu Feb 22 07:43:34 2007 +0100
3590 [PATCH] get_dev() now unconditionally uses manual relocation
3592 Since the relocation fix is not included yet and we're not sure how
3593 it will be added, this patch removes code that required relocation
3594 to be fixed for now.
3596 Signed-off-by: Stefan Roese <sr@denx.de>
3598 commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
3599 Author: Stefan Roese <sr@denx.de>
3600 Date: Thu Feb 22 07:40:23 2007 +0100
3602 [PATCH] Change systemace driver to select 8 & 16bit mode
3604 As suggested by Grant Likely this patch enables the Xilinx SystemACE
3605 driver to select 8 or 16bit mode upon startup.
3607 Signed-off-by: Stefan Roese <sr@denx.de>
3609 commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
3610 Author: Haiying Wang <Haiying.Wang@freescale.com>
3611 Date: Wed Feb 21 16:52:31 2007 +0100
3613 [PATCH v3] Add sync to ensure flash_write_cmd is fully finished
3615 Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
3616 is fully finished. The sync() is defined in each CPU's io.h file. For
3617 those CPUs which do not need sync for now, a dummy sync() is defined in
3620 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
3622 commit da04995c7dc6772013a9a0dc5c767f190c402478
3623 Author: Stefan Roese <sr@denx.de>
3624 Date: Wed Feb 21 13:44:34 2007 +0100
3626 [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
3628 Signed-off-by: Stefan Roese <sr@denx.de>
3630 commit 751bb57107d78978ae08e697c3deba816f5be091
3631 Author: Stefan Roese <sr@denx.de>
3632 Date: Tue Feb 20 13:21:57 2007 +0100
3634 [PATCH] Fix relocation problem with "new" get_dev() function
3636 This patch enables the "new" get_dev() function for block devices
3637 introduced by Grant Likely to be used on systems that still suffer
3638 from the relocation problems (manual relocation neede because of
3639 problems with linker script).
3641 Hopefully we can resolve this relocation issue soon for all platform
3642 so we don't need this additional code anymore.
3644 Signed-off-by: Stefan Roese <sr@denx.de>
3646 commit d93e2212f962668b3dce091ff5edc33f2347fe37
3647 Author: Stefan Roese <sr@denx.de>
3648 Date: Tue Feb 20 13:17:42 2007 +0100
3650 [PATCH] Update SystemACE driver for 16bit access
3652 This patch removes some problems when the Xilinx SystemACE driver
3653 is used with 16bit access on an big endian platform (like the
3656 Signed-off-by: Stefan Roese <sr@denx.de>
3658 commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
3659 Author: Stefan Roese <sr@denx.de>
3660 Date: Tue Feb 20 13:15:40 2007 +0100
3662 [PATCH] Clean up Katmai (440SPe) linker script
3664 Signed-off-by: Stefan Roese <sr@denx.de>
3666 commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
3667 Author: Stefan Roese <sr@denx.de>
3668 Date: Tue Feb 20 10:57:08 2007 +0100
3670 [PATCH] Add support for the AMCC Katmai (440SPe) eval board
3672 Signed-off-by: Stefan Roese <sr@denx.de>
3674 commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
3675 Author: Stefan Roese <sr@denx.de>
3676 Date: Tue Feb 20 10:51:26 2007 +0100
3678 [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
3680 This patch switches to the desired I2C bus when the date/dtt
3681 commands are called. This can be configured using the
3682 CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
3684 Signed-off-by: Stefan Roese <sr@denx.de>
3686 commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
3687 Author: Stefan Roese <sr@denx.de>
3688 Date: Tue Feb 20 10:43:34 2007 +0100
3690 [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
3692 This patch adds support for the DDR2 controller used on the
3693 440SP and 440SPe. It is tested on the Katmai (440SPe) eval
3694 board and works fine with the following DIMM modules:
3696 - Corsair CM2X512-5400C4 (512MByte per DIMM)
3697 - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
3698 - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
3700 This patch also adds the nice functionality to dynamically
3701 create the TLB entries for the SDRAM (tlb.c). So we should
3702 never run into such problems with wrong (too short) TLB
3703 initialization again on these platforms.
3705 Signed-off-by: Stefan Roese <sr@denx.de>
3707 commit 36d830c9830379045f5daa9f542ac1c990c70068
3708 Author: Stefan Roese <sr@denx.de>
3709 Date: Tue Feb 20 10:35:42 2007 +0100
3711 [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
3713 Since the existing 4xx SPD SDRAM initialization routines for the
3714 405 SDRAM controller and the 440 DDR controller don't have much in
3715 common this patch splits both drivers into different files.
3717 This is in preparation for the 440 DDR2 controller support (440SP/e).
3719 Signed-off-by: Stefan Roese <sr@denx.de>
3721 commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
3722 Author: Stefan Roese <sr@denx.de>
3723 Date: Tue Feb 20 10:27:08 2007 +0100
3725 [PATCH] PPC4xx: Add support for multiple I2C busses
3727 This patch adds support for multiple I2C busses on the PPC4xx
3728 platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
3729 to make use of this feature.
3731 It also merges the 405 and 440 i2c header files into one common
3734 Also the 4xx i2c reset procedure is reworked since I experienced
3735 some problems with the first access on the 440SPe Katmai board.
3737 Signed-off-by: Stefan Roese <sr@denx.de>
3739 commit eb867a76238fb38e952c37871b16d0d7fd61c95f
3740 Author: Grant Likely <grant.likely@secretlab.ca>
3741 Date: Tue Feb 20 09:05:45 2007 +0100
3743 [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
3745 Block device read/write is anonymous data; there is no need to use a
3746 typed pointer. void * is fine. Also add a hook for block_read functions
3748 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3750 commit 53758fa20e935cc87eeb0519ed365df753a6f289
3751 Author: Grant Likely <grant.likely@secretlab.ca>
3752 Date: Tue Feb 20 09:05:38 2007 +0100
3754 [PATCH 8_9] Add block_write hook to block_dev_desc_t
3756 Preparation for future patches which support block device writing
3758 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3760 commit f4852ebe6ca946a509667eb68be42026f837be76
3761 Author: Grant Likely <grant.likely@secretlab.ca>
3762 Date: Tue Feb 20 09:05:31 2007 +0100
3764 [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
3766 Register read/write does not need to be wrapped in a full function. The
3767 patch replaces them with macros.
3769 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3771 commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
3772 Author: Grant Likely <grant.likely@secretlab.ca>
3773 Date: Tue Feb 20 09:05:23 2007 +0100
3775 [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
3777 The code in this file is not a command; it is a device driver. Put it in
3778 the correct place. There are zero functional changes in this patch, it
3779 only moves the file.
3781 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3783 commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
3784 Author: Grant Likely <grant.likely@secretlab.ca>
3785 Date: Tue Feb 20 09:05:16 2007 +0100
3787 [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
3789 This patch is in preparation of additional changes to the sysace driver.
3790 May as well take this opportunity to fixup the inconsistent whitespace since
3791 this file is about to undergo major changes anyway.
3793 There are zero functional changes in this patch. It only cleans up the
3796 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3798 commit 80ba981d940471fe7e539e64fa3d2bd80002beda
3799 Author: Grant Likely <grant.likely@secretlab.ca>
3800 Date: Tue Feb 20 09:05:07 2007 +0100
3802 [PATCH 4_4] Remove local implementation of isprint() in ft_build.c
3804 isprint is already defined in ctype.c
3806 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3808 commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
3809 Author: Grant Likely <grant.likely@secretlab.ca>
3810 Date: Tue Feb 20 09:05:00 2007 +0100
3812 [PATCH 3_9] Move buffer print code from md command to common function
3814 Printing a buffer is a darn useful thing. Move the buffer print code
3815 into print_buffer() in lib_generic/
3817 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3819 commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
3820 Author: Grant Likely <grant.likely@secretlab.ca>
3821 Date: Tue Feb 20 09:04:52 2007 +0100
3823 [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
3825 Change the xilinx device drivers and board code to include config.h
3826 instead of xparameters.h directly. config.h always includes the
3827 correct xparameters file. This change reduces the posibility of
3828 including the wrong file when adding a new xilinx board port
3830 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3832 commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
3833 Author: Grant Likely <grant.likely@secretlab.ca>
3834 Date: Tue Feb 20 09:04:34 2007 +0100
3836 [PATCH 1_4] Merge common get_dev() routines for block devices
3838 Each of the filesystem drivers duplicate the get_dev routine. This change
3839 merges them into a single function in part.c
3841 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
3843 commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
3844 Author: Wolfgang Denk <wd@pollux.denx.de>
3845 Date: Mon Feb 19 23:09:51 2007 +0100
3847 MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
3848 as root file system images.
3850 commit 489c696ae7211218961d159e43e722d74c36fcbc
3851 Author: Sergei Poselenov <sposelenov@emcraft.com>
3852 Date: Wed Feb 14 14:30:28 2007 +0300
3854 MCC200: Extensions to Software Update Mechanism
3856 Update / extend Software Update Mechanism for MCC200 board:
3858 - Add support for rootfs image added. The environment variables
3859 "rootfs_st" and "rootfs_nd" can be used to override the default
3860 values of the image start and end.
3861 - Remove excessive key check code.
3864 commit 4be23a12f23f1372634edc3215137b09768b7949
3865 Author: Stefan Roese <sr@denx.de>
3866 Date: Mon Feb 19 08:23:15 2007 +0100
3868 [PATCH] Update Sequoia EBC configuration (NOR FLASH)
3870 As spotted by Matthias Fuchs, the READY input should not be
3871 enabled for the NOR FLASH on the Sequoia board.
3873 Signed-off-by: Stefan Roese <sr@denx.de>
3875 commit 2605e90bf676d48123afe5719a846d2b52b24aac
3876 Author: Heiko Schocher <hs@pollux.denx.de>
3877 Date: Fri Feb 16 07:57:42 2007 +0100
3879 [PATCH] Added support for the jupiter board.
3881 Signed-off-by: Heiko Schocher <hs@denx.de>
3883 commit 497d012e5be0194e1084073d0081eb1a844796b2
3884 Author: Gary Jennejohn <garyj@pollux.denx.de>
3885 Date: Mon Feb 12 13:11:50 2007 +0100
3887 LPC2292: patch from Siemens.
3889 commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
3890 Author: Stefan Roese <sr@denx.de>
3891 Date: Sat Feb 10 08:49:31 2007 +0100
3893 [PATCH] Add missing p3mx.h file to repository (ups)
3895 Signed-off-by: Stefan Roese <sr@denx.de>
3897 commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
3898 Author: Bartlomiej Sieka <tur@semihalf.com>
3899 Date: Fri Feb 9 10:45:42 2007 +0100
3901 [Motion-PRO] Preliminary support for the Motion-PRO board.
3903 commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
3904 Author: Stefan Roese <sr@denx.de>
3905 Date: Wed Feb 7 16:51:08 2007 +0100
3907 [PATCH] Update some AMCC 4xx board config files (set initrd_high)
3909 Some boards that can have more than 768MBytes of SDRAM need to
3910 set "initrd_high", so that the initrd can be accessed by the
3913 Signed-off-by: Stefan Roese <sr@denx.de>
3915 commit 7372ca68227930d03cffa548310524cad5b96733
3916 Author: Stefan Roese <sr@denx.de>
3917 Date: Fri Feb 2 12:44:22 2007 +0100
3919 [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
3921 Previously the strapping DCR/SDR was read to determine if the internal PCI
3922 arbiter is enabled or not. This strapping bit can be overridden, so now
3923 the current status is read from the correct DCR/SDR register.
3925 Signed-off-by: Stefan Roese <sr@denx.de>
3927 commit 2aa54f651a42d198673318f07a20c89a43e4d197
3928 Author: Stefan Roese <sr@denx.de>
3929 Date: Fri Feb 2 12:42:08 2007 +0100
3931 [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
3933 Signed-off-by: Stefan Roese <sr@denx.de>
3935 commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
3936 Author: Stefan Roese <sr@denx.de>
3937 Date: Thu Feb 1 13:22:41 2007 +0100
3939 [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
3941 When PCI PNP is enabled the pci pnp configuration routine is called
3942 which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
3943 problems with some PCI cards. For now disable the PCI PNP configuration.
3945 Signed-off-by: Stefan Roese <sr@denx.de>
3947 commit 2902fadade3be7659467e8d074048c6b7068f5c0
3948 Author: Stefan Roese <sr@denx.de>
3949 Date: Wed Jan 31 16:56:10 2007 +0100
3951 [PATCH] Update 440EPx/440GRx cpu detection
3953 Signed-off-by: Stefan Roese <sr@denx.de>
3955 commit d5ea287b02a6945c3977410e364a879dd1a555c8
3956 Author: Stefan Roese <sr@denx.de>
3957 Date: Wed Jan 31 16:38:04 2007 +0100
3959 [PATCH] Update esd cpci5200 files
3961 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
3963 commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
3964 Author: Stefan Roese <sr@denx.de>
3965 Date: Wed Jan 31 16:37:34 2007 +0100
3967 [PATCH] Add support for esd mecp5200 board
3969 Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
3971 commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
3972 Author: Stefan Roese <sr@denx.de>
3973 Date: Wed Jan 31 12:38:50 2007 +0100
3975 [PATCH] Remove unneccessary yellowstone board config file
3977 Signed-off-by: Stefan Roese <sr@denx.de>
3979 commit e802594b6fa1b166308820c276b96dc0d7cc731c
3980 Author: Stefan Roese <sr@denx.de>
3981 Date: Tue Jan 30 17:06:10 2007 +0100
3983 [PATCH] Update Sequoia (440EPx) config file
3985 The config file now handles the 2nd target, the Rainier (440GRx)
3986 evaluation board better. Additionally the PPC input clock was
3987 adjusted to match the correct value of 33.0 MHz.
3989 Signed-off-by: Stefan Roese <sr@denx.de>
3991 commit 700200c67e73b83751418abe7815840dca8fd6cb
3992 Author: Stefan Roese <sr@denx.de>
3993 Date: Tue Jan 30 17:04:19 2007 +0100
3995 [PATCH] Merge Yosemite & Yellowstone board ports
3997 Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
3998 share one config file and all board specific files. This way we
3999 don't have to maintain two different sets of files for nearly
4002 Signed-off-by: Stefan Roese <sr@denx.de>
4004 commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
4005 Author: Stefan Roese <sr@denx.de>
4006 Date: Tue Jan 30 15:01:49 2007 +0100
4008 [PATCH] Update Prodrive SCPU (PDNB3 variant) board
4010 SCPU doesn't use redundant environment in flash.
4012 Signed-off-by: Stefan Roese <sr@denx.de>
4014 commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
4015 Author: Stefan Roese <sr@denx.de>
4016 Date: Tue Jan 30 12:51:07 2007 +0100
4018 [PATCH] alpr: Update alpr board config file
4020 Signed-off-by: Stefan Roese <sr@denx.de>
4022 commit f8db84f132b1e335f20f96138a1f09ed97b08664
4023 Author: Wolfgang Denk <wd@pollux.denx.de>
4024 Date: Tue Jan 30 00:50:40 2007 +0100
4026 LPC2292 SODIMM port coding style cleanup.
4028 commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
4029 Author: Gary Jennejohn <garyj@pollux.denx.de>
4030 Date: Wed Jan 24 12:16:56 2007 +0100
4032 Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
4034 commit 2daf046ba627f85f44195815778140039636244e
4035 Author: Bartlomiej Sieka <tur@semihalf.com>
4036 Date: Tue Jan 23 17:22:06 2007 +0100
4038 [iDMR] Add MTD and JFFS2 support, also add default partition definition.
4040 commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
4041 Author: Bartlomiej Sieka <tur@semihalf.com>
4042 Date: Tue Jan 23 14:21:14 2007 +0100
4044 [iDMR] Flash driver on initialisation write-protects some sectors,
4045 currently sectors 0-3. Sector 3 does not need to be protected, though
4046 (U-boot occupies sectors 0-1 and the environment sector 2). This commit
4047 fixes this, i.e., only sectors 0-2 are protected.
4049 commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
4050 Author: Bartlomiej Sieka <tur@semihalf.com>
4051 Date: Tue Jan 23 14:11:22 2007 +0100
4053 [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
4054 "mii device" results in "Unexpected exception"). Fixing this properly
4055 requires some clean-up in the FEC drivers infrastructure for ColdFire, so
4056 this commit disables MII commads for now.
4058 commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
4059 Author: Bartlomiej Sieka <tur@semihalf.com>
4060 Date: Tue Jan 23 13:25:22 2007 +0100
4062 [ColdFire MCF5271 family] Add CPU detection based on the value of Chip
4063 Identification Register (CIR).
4065 commit fdef388758506765d4d6a7155c8f1584c63ff581
4066 Author: roy zang <tie-fei.zang@freescale.com>
4067 Date: Mon Jan 22 13:19:21 2007 +0800
4069 use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
4070 The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
4071 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
4074 commit a4012396645533aef218354eeba754dff0deace8
4075 Author: Wolfgang Denk <wd@pollux.denx.de>
4076 Date: Fri Jan 19 23:08:39 2007 +0100
4080 commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
4081 Author: Heiko Schocher <hs@pollux.denx.de>
4082 Date: Fri Jan 19 19:57:10 2007 +0100
4084 [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
4086 Signed-off-by: Heiko Schocher <hs@denx.de>
4088 commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
4089 Author: Heiko Schocher <hs@pollux.denx.de>
4090 Date: Fri Jan 19 18:05:26 2007 +0100
4092 [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
4093 if you must swap the bytes between reading/writing.
4094 (Needed for the SC3 board)
4096 Signed-off-by: Heiko Schocher <hs@denx.de>
4098 commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
4099 Author: Stefan Roese <sr@denx.de>
4100 Date: Thu Jan 18 16:05:47 2007 +0100
4102 [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
4104 Signed-off-by: Stefan Roese <sr@denx.de>
4106 commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
4107 Author: Stefan Roese <sr@denx.de>
4108 Date: Thu Jan 18 11:54:52 2007 +0100
4110 [PATCH] Update Prodrive P3Mx support
4112 Signed-off-by: Stefan Roese <sr@denx.de>
4114 commit 34167a36c29ee946b727465db5c014746a08e978
4115 Author: Stefan Roese <sr@denx.de>
4116 Date: Thu Jan 18 11:48:10 2007 +0100
4118 [PATCH] Add missing Taishan config file
4120 Signed-off-by: Stefan Roese <sr@denx.de>
4122 commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
4123 Author: Heiko Schocher <hs@pollux.denx.de>
4124 Date: Thu Jan 18 11:28:51 2007 +0100
4126 [PATCH] Fix: Compilerwarnings for SC3 board.
4127 The EBC Configuration Register is now by CFG_EBC_CFG definable
4128 Added JFFS2 support for the SC3 board.
4130 Signed-off-by: Heiko Schocher <hs@denx.de>
4132 commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
4133 Author: Stefan Roese <sr@denx.de>
4134 Date: Thu Jan 18 10:25:34 2007 +0100
4136 [PATCH] Add support for AMCC Taishan PPC440GX eval board
4138 Signed-off-by: Stefan Roese <sr@denx.de>
4140 commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
4141 Author: Wolfgang Denk <wd@pollux.denx.de>
4142 Date: Tue Jan 16 18:30:50 2007 +0100
4144 Raname solidcard3 into sc3; add redundant env for sc3
4146 commit 1bbbbdd20fcec9933697000dcf55ff7972622596
4147 Author: Wolfgang Denk <wd@pollux.denx.de>
4148 Date: Tue Jan 16 12:46:35 2007 +0100
4150 Update default environment for Solidcard3
4152 commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
4153 Author: Stefan Roese <sr@denx.de>
4154 Date: Mon Jan 15 09:46:29 2007 +0100
4156 [PATCH] Fix 440SPe rev B detection from previous patch
4158 Signed-off-by: Stefan Roese <sr@denx.de>
4160 commit a443d31410c571ee8f970da819a44d698fdd6b1f
4161 Author: Heiko Schocher <hs@pollux.denx.de>
4162 Date: Sun Jan 14 13:35:31 2007 +0100
4164 [FIX] correct I2C Writes for the LM81 Sensor.
4166 Signed-off-by: Heiko Schocher <hs@denx.de>
4168 commit 0bba5452835f19a61204edcda3a58112fd8e2208
4169 Author: Wolfgang Denk <wd@pollux.denx.de>
4170 Date: Sat Jan 13 11:17:10 2007 +0100
4172 Undo commit 3033ebb2: reset command does not take any arguments
4174 Haiying Wang's modification to the reset command was broken, undo it.
4176 Signed-off-by: Wolfgang Denk <wd@denx.de>
4178 commit 95981778cff0038fd9941044d6a3eda810e33258
4179 Author: Stefan Roese <sr@denx.de>
4180 Date: Sat Jan 13 08:01:03 2007 +0100
4182 [PATCH] Update 440SP(e) cpu revisions
4184 Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
4186 Signed-off-by: Stefan Roese <sr@denx.de>
4188 commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
4189 Author: Stefan Roese <sr@denx.de>
4190 Date: Sat Jan 13 07:59:56 2007 +0100
4192 [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
4194 Now the board revision and the current PCI bus speed are printed after
4197 Also the EBC initialising is now done via defines in the board config
4200 Signed-off-by: Stefan Roese <sr@denx.de>
4202 commit 36adff362c2c0141ff8a810d42a7e478f779130f
4203 Author: Stefan Roese <sr@denx.de>
4204 Date: Sat Jan 13 07:59:19 2007 +0100
4206 [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
4208 Now the board revision and the current PCI bus speed are printed after
4211 Also the EBC initialising is now done via defines in the board config
4214 Signed-off-by: Stefan Roese <sr@denx.de>
4216 commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
4217 Author: Stefan Roese <sr@denx.de>
4218 Date: Sat Jan 13 07:57:51 2007 +0100
4220 [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
4222 Now the board revision and the current PCI bus speed are printed after
4225 Signed-off-by: Stefan Roese <sr@denx.de>
4227 commit ca43ba18e910206ef8063e4b22d282630bff3fd2
4228 Author: Heiko Schocher <hs@pollux.denx.de>
4229 Date: Thu Jan 11 15:44:44 2007 +0100
4231 Added support for the SOLIDCARD III board from Eurodesign
4233 Signed-off-by: Heiko Schocher <hs@denx.de>
4235 commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
4236 Author: Reinhard Thies <Reinhard.Thies@web.de>
4237 Date: Wed Jan 10 14:41:14 2007 +0100
4239 Adjusted default environment for cam5200 board.
4241 commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
4242 Author: Wolfgang Denk <wd@pollux.denx.de>
4243 Date: Wed Jan 10 15:35:52 2007 +0100
4247 commit 787fa15860a57833e50bd30555079a9cd4e519b8
4248 Author: Wolfgang Denk <wd@pollux.denx.de>
4249 Date: Wed Jan 10 01:28:39 2007 +0100
4251 Fix auto_update for MCC200 board.
4253 The invocation of do_auto_update() is moved to the end of the
4254 misc_init_r() function, after the flash mappings have been
4255 initialized. Please find attached a patch that implements that
4258 Also correct the decoding of the keypad status. With this update, the
4259 key that will trigger the update is Column 2, Row 2.
4261 commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
4262 Author: Marian Balakowicz <m8@semihalf.com>
4263 Date: Wed Jan 10 00:26:15 2007 +0100
4265 CAM5200 flash driver modifications:
4266 - use CFI driver (replaces custom flash driver) for main 'cam5200' target
4267 - add second build target 'cam5200_niosflash' which still uses custom driver
4269 commit 67fea022fa957f59653b5238c7496f80a6b70432
4270 Author: Markus Klotzbuecher <mk@denx.de>
4271 Date: Tue Jan 9 16:02:48 2007 +0100
4273 SPC1920: cleanup memory contoller setup
4275 commit 8fc2102faa23593c80381437c09f7745a14deb40
4276 Author: Markus Klotzbuecher <mk@denx.de>
4277 Date: Tue Jan 9 14:57:14 2007 +0100
4279 Fix the cpu speed setup to work with all boards.
4281 commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
4282 Author: Markus Klotzbuecher <mk@denx.de>
4283 Date: Tue Jan 9 14:57:13 2007 +0100
4285 SPC1920: add support for the FM18L08 Ramtron FRAM
4287 commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
4288 Author: Markus Klotzbuecher <mk@denx.de>
4289 Date: Tue Jan 9 14:57:13 2007 +0100
4291 SPC1920: update the HPI register addresses to work with the second
4292 generation of hardware
4294 commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
4295 Author: Markus Klotzbuecher <mk@creamnet.de>
4296 Date: Tue Jan 9 14:57:13 2007 +0100
4298 Miscellanious spc1920 related cleanups
4300 commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
4301 Author: Markus Klotzbuecher <mk@denx.de>
4302 Date: Tue Jan 9 14:57:12 2007 +0100
4304 SPC1920 GO/NOGO led should be set to color red in U-Boot
4306 commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
4307 Author: Markus Klotzbuecher <mk@creamnet.de>
4308 Date: Tue Jan 9 14:57:12 2007 +0100
4310 Add support for the DS3231 RTC
4312 commit 8139567b60d678584b05f0718a681f2047c5e14f
4313 Author: Markus Klotzbuecher <mk@creamnet.de>
4314 Date: Tue Jan 9 14:57:11 2007 +0100
4316 SMC1 uses external CLK4 instead of BRG on spc1920
4318 commit d8d9de1a02fbd880b613d607143d1f57342affc7
4319 Author: Markus Klotzbuecher <mk@creamnet.de>
4320 Date: Tue Jan 9 14:57:10 2007 +0100
4322 Update the SPC1920 CMB PLD driver
4324 commit 3f34f869162750e5e999fd140f884f5de952bcfe
4325 Author: Markus Klotzbuecher <mk@creamnet.de>
4326 Date: Tue Jan 9 14:57:10 2007 +0100
4328 Add / enable I2C support on the spc1920 board
4330 commit d28707dbce1e9ac2017ad051da4133bf22b4204f
4331 Author: Markus Klotzbuecher <mk@creamnet.de>
4332 Date: Tue Jan 9 14:57:10 2007 +0100
4334 Add support for the tms320671x host port interface (HPI)
4336 commit f4eb54529bb3664c3a562e488b460fe075f79d67
4337 Author: Wolfgang Denk <wd@pollux.denx.de>
4338 Date: Sun Jan 7 00:13:11 2007 +0100
4340 Prepare for release 1.2.0
4342 commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
4343 Author: Stefan Roese <sr@denx.de>
4344 Date: Sat Jan 6 15:58:09 2007 +0100
4346 [PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
4348 This patch fixes a problem with an incorrect setup for the refresh
4349 timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
4351 Signed-off-by: Stefan Roese <sr@denx.de>
4353 commit f16c1da9577f06c5fc08651a4065537407de4635
4354 Author: Stefan Roese <sr@denx.de>
4355 Date: Sat Jan 6 15:56:13 2007 +0100
4357 [PATCH] Update ALPR board files
4359 This update brings the ALPR board support to the newest version.
4360 It also fixes a problem with the NAND driver.
4362 Signed-off-by: Stefan Roese <sr@denx.de>
4364 commit cd1d937f90250a32988c37b2b4af8364d25de8ed
4365 Author: Stefan Roese <sr@denx.de>
4366 Date: Fri Jan 5 11:46:05 2007 +0100
4368 [PATCH] nand: Fix problem with oobsize calculation
4370 Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
4372 The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
4373 returns a 0x15. In the code fragment below bits [1:0] determine the
4374 page size, it is ANDed via "(extid & 0x3)" then shifted out. The
4375 next field is also ANDed with 0x3. However this is a one bit field
4376 as defined in the Hynix and Samsung parts in the 4th ID byte that
4377 determins the oobsize, not a two bit field. It works on Samsung as
4378 bits[3:2] are 01. However for the Hynix there is a 11 in these two
4379 bits, so the oob size gets messed up.
4381 I checked the correct linux code and the suggested fix from Brian is
4382 also available in the linux nand mtd driver.
4384 Signed-off-by: Stefan Roese <sr@denx.de>
4386 commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
4387 Author: Stefan Roese <sr@denx.de>
4388 Date: Fri Jan 5 10:40:36 2007 +0100
4390 [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
4392 This fix will make the MAL burst disabling patch for the Linux
4393 EMAC driver obsolete.
4395 Signed-off-by: Stefan Roese <sr@denx.de>
4397 commit 023889838282b6237b401664f22dd22dfba2c066
4398 Author: Stefan Roese <sr@denx.de>
4399 Date: Fri Jan 5 10:38:05 2007 +0100
4401 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
4403 This code will optimize the DDR2 controller setup on a board specific
4406 Note: This code doesn't work right now on the NAND booting image for the
4407 Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
4409 Signed-off-by: Stefan Roese <sr@denx.de>
4411 commit cce4acbb68398634b8d011ed7bb0d12269c84230
4412 Author: Bartlomiej Sieka <tur@semihalf.com>
4413 Date: Thu Dec 28 19:08:21 2006 +0100
4416 - fix a typo in V38B config file
4417 - move watchdog initialisation earlier in the boot process
4418 - add "wdt=off" to default kernel command line (disables kernel watchdog)
4420 commit 92eb729bad876725aeea908d2addba0800620840
4421 Author: Wolfgang Denk <wd@pollux.denx.de>
4422 Date: Wed Dec 27 01:26:13 2006 +0100
4424 Fix bug in adaption of Stefano Babic's CFI driver patch.
4426 commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
4427 Author: Wolfgang Denk <wd@pollux.denx.de>
4428 Date: Sun Dec 24 01:42:57 2006 +0100
4432 commit d784fdb05900ada3686d5778783e1fb328e9fb66
4433 Author: Stefano Babic <sbabic@denx.de>
4434 Date: Tue Dec 12 00:22:42 2006 +0100
4436 Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
4438 commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
4439 Author: Stefan Roese <sr@denx.de>
4440 Date: Fri Dec 22 14:29:40 2006 +0100
4442 [PATCH] Fix sequoia flash autodetection (finally correct)
4444 Now 32MByte and 64MByte FLASH is know to work and other
4445 configurations should work too.
4447 Signed-off-by: Stefan Roese <sr@denx.de>
4449 commit 82e5236a8b719543643fd26d5827938ab2b94818
4450 Author: Wolfgang Denk <wd@pollux.denx.de>
4451 Date: Fri Dec 22 10:30:26 2006 +0100
4453 Minor code cleanup; update CHANGELOG.
4455 commit fa23044564091f05d9695beb7b5b9a931e7f41a4
4456 Author: Heiko Schocher <hs@pollux.denx.de>
4457 Date: Thu Dec 21 17:17:02 2006 +0100
4459 Added support for the TQM8272 board from TQ
4461 Signed-off-by: Heiko Schocher <hs@denx.de>
4463 commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
4464 Author: Heiko Schocher <hs@pollux.denx.de>
4465 Date: Thu Dec 21 16:14:48 2006 +0100
4467 [PATCH] Add support for the UC101 board from MAN.
4469 Signed-off-by: Heiko Schocher <hs@denx.de>
4471 commit c84bad0ef60e7055ab0bd49b93069509cecc382a
4472 Author: Bartlomiej Sieka <tur@semihalf.com>
4473 Date: Wed Dec 20 00:29:43 2006 +0100
4475 Fix to make the baudrate changes immediate for the MCF52x2 family.
4477 commit daa6e418bcc0c717752e8de939c213c790286096
4478 Author: Bartlomiej Sieka <tur@semihalf.com>
4479 Date: Wed Dec 20 00:27:32 2006 +0100
4481 Preliminary support for the iDMR board (ColdFire).
4483 commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
4484 Author: Andrei Safronov <safronov@pollux.denx.de>
4485 Date: Fri Dec 8 16:23:08 2006 +0100
4487 automatic update mechanism
4489 commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
4490 Author: roy zang <tie-fei.zang@freescale.com>
4491 Date: Mon Dec 4 17:56:59 2006 +0800
4493 Slight code clean up.
4494 Add comments, delete duplicate define and remove spaces.
4495 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
4497 commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
4498 Author: roy zang <tie-fei.zang@freescale.com>
4499 Date: Mon Dec 4 17:54:21 2006 +0800
4501 Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
4502 multiplier table can not refect the real PLL clock behavior of these
4503 processors. Please refer to the hardware specification for detailed
4504 information of the corresponding processors.
4505 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
4507 commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
4508 Author: roy zang <tie-fei.zang@freescale.com>
4509 Date: Mon Dec 4 14:46:23 2006 +0800
4511 Remove the static MAC address, ip address, server ip, netmask and
4512 gateway ip for network setting.
4513 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
4515 commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
4516 Author: roy zang <tie-fei.zang@freescale.com>
4517 Date: Mon Dec 4 14:33:08 2006 +0800
4519 Remove the duplicate memory test code for mpc744ihpc2 board.
4520 If a memory test is needed, please use the functions in
4521 post/memory.c or memtest command.
4522 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
4524 commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
4525 Author: roy zang <tie-fei.zang@freescale.com>
4526 Date: Fri Dec 1 19:01:25 2006 +0800
4528 Fix the exception occuring in RAM table search issue.
4529 The original search_one_table() function code can only processes the search
4530 for the exception occurring in FLASH/ROM, because the exception and fixup
4531 table usually locate in FLASH. If the exception address is also in
4532 FLASH, it will be OK.
4533 If the exception occurs in RAM, after the u-boot relocation, a
4534 relocation offset should be added.
4536 clean up the code in cpu/74xx_7xx/cpu.c
4538 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
4540 commit ee311214e0d216f904feea269599d0934bf71f23
4541 Author: roy zang <tie-fei.zang@freescale.com>
4542 Date: Fri Dec 1 11:47:36 2006 +0800
4544 Clean up the code according to codestyle:
4545 (1) remove some C++ comments.
4546 (2) remove trailing white space.
4547 (3) remove trailing empty line.
4548 (4) Indentation by table.
4549 (5) remove {} in one line condition.
4550 (6) add space before '(' in function call.
4551 Remove some weird printf () output.
4552 Add necessary comments.
4553 Modified Makefile to support building in a separate directory.
4555 commit dd520bf314c7add4183c5191692180f576f96b60
4556 Author: Wolfgang Denk <wd@pollux.denx.de>
4557 Date: Thu Nov 30 18:02:20 2006 +0100
4561 commit 8d9a8610b8256331132227e9e6585c6bd5742787
4562 Author: Wolfgang Denk <wd@pollux.denx.de>
4563 Date: Thu Nov 30 01:54:07 2006 +0100
4565 Code cleanup. Update CHANGELOG.
4567 commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
4568 Author: Grant Likely <grant.likely@secretlab.ca>
4569 Date: Wed Nov 29 16:23:42 2006 +0100
4571 [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
4573 The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
4574 not the XLB frequency.
4576 This patch depends on the previous patches for MPC52xx device tree support
4578 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
4579 Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
4581 commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
4582 Author: Stefan Roese <sr@denx.de>
4583 Date: Wed Nov 29 15:42:37 2006 +0100
4585 [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
4587 This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
4588 and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
4589 quite similar and share the same board directory "prodrive/p3mx"
4590 and the same config file "p3mx.h".
4592 Signed-off-by: Stefan Roese <sr@denx.de>
4594 commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
4595 Author: Stefan Roese <sr@denx.de>
4596 Date: Wed Nov 29 12:53:15 2006 +0100
4598 [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
4600 In the bootvx command the load address was only read from the env
4601 variable "loadaddr" and not optionally passed as paramter as described
4602 in the help. This is fixed with this patch. The behaviour is now the
4603 same as in the bootelf command.
4605 Signed-off-by: Stefan Roese <sr@denx.de>
4607 commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
4608 Author: Stefan Roese <sr@denx.de>
4609 Date: Wed Nov 29 12:03:57 2006 +0100
4611 [PATCH] include/ppc440.h minor error affecting interrupts
4613 Fixed include/ppc440.c for UIC address Bug
4615 Corrects bug affecting the addresses for the universal interrupt
4616 controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
4618 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
4619 Signed-off-by: Stefan Roese <sr@denx.de>
4621 commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
4622 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
4623 Date: Tue Nov 28 16:17:27 2006 -0600
4625 Make fsl-i2c not conflict with SOFT I2C
4627 Signed-off-by: Timur Tabi <timur@freescale.com>
4629 commit 14198bf768fdc958e3c1afd2404e5262208e98d7
4630 Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
4631 Date: Tue Nov 28 16:17:18 2006 -0600
4633 Fix I2C master address initialization.
4635 Signed-off-by: Timur Tabi <timur@freescale.com>
4637 commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
4638 Author: Kim Phillips <kim.phillips@freescale.com>
4639 Date: Tue Nov 28 23:31:19 2006 -0600
4641 Assign maintainers for mpc8349emds and mpc8360emds
4643 Dave for mpc8360emds, and me for mpc8349emds.
4645 commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
4646 Author: Kim Phillips <kim.phillips@freescale.com>
4647 Date: Tue Nov 28 23:28:33 2006 -0600
4649 Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
4651 give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
4652 since they are passed by reference to ucc_get_cmxucr_reg and assigned.
4654 commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
4655 Author: Timur Tabi <timur@freescale.com>
4656 Date: Tue Nov 28 12:09:35 2006 -0600
4658 mpc83xx: Miscellaneous code style fixes
4660 Implement various code style fixes and similar changes.
4662 Signed-off-by: Timur Tabi <timur@freescale.com>
4664 commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
4665 Author: Stefan Roese <sr@denx.de>
4666 Date: Tue Nov 28 17:55:49 2006 +0100
4668 [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
4670 This patch adds the code and configuration necessary to boot with an
4671 arch/powerpc Linux kernel.
4673 Signed-off-by: Grant Likely <grant.likely@gmail.com>
4674 Acked-by: Jon Loeliger <jdl@freescale.com>
4676 commit e732faec95a83cb468b4850ae807c8301dde8f6a
4677 Author: Stefan Roese <sr@denx.de>
4678 Date: Tue Nov 28 16:09:24 2006 +0100
4680 [PATCH] PPC4xx: 440SP Rev. C detection added
4682 Signed-off-by: Stefan Roese <sr@denx.de>
4684 commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
4685 Author: Stefan Roese <sr@denx.de>
4686 Date: Tue Nov 28 11:04:45 2006 +0100
4688 [PATCH] nand: Fix patch merge problem
4690 Signed-off-by: Stefan Roese <sr@denx.de>
4692 commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
4693 Author: Stefan Roese <sr@denx.de>
4694 Date: Tue Nov 28 11:04:45 2006 +0100
4696 [PATCH] nand: Fix patch merge problem
4698 Signed-off-by: Stefan Roese <sr@denx.de>
4700 commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
4701 Author: Wolfgang Denk <wd@pollux.denx.de>
4702 Date: Mon Nov 27 22:53:53 2006 +0100
4706 commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
4707 Author: Stefan Roese <sr@denx.de>
4708 Date: Mon Nov 27 17:43:25 2006 +0100
4710 [PATCH] 4xx_enet.c: Correct the setting of zmiifer register
4712 Patch below corrects the setting of the zmiifer register, it was
4713 overwritting the register rather than ORing the settings.
4715 Signed-off-by: Neil Wilson <NWilson@airspan.com>
4716 Signed-off-by: Stefan Roese <sr@denx.de>
4718 commit d1a72545296800b7e219f93104ad5836f0003d66
4719 Author: Stefan Roese <sr@denx.de>
4720 Date: Mon Nov 27 17:34:10 2006 +0100
4722 [PATCH] Select NAND embedded environment from board configuration
4724 The current NAND Bootloader setup forces the environment
4725 variables to be in line with the bootloader. This change
4726 enables the configuration to be made in the board include
4727 file instead so that it can be individually enabled.
4729 Signed-off-by: Nick Spence <nick.spence@freescale.com>
4730 Signed-off-by: Stefan Roese <sr@denx.de>
4732 commit 15784862857c3c2214498defcfed84ff137fb81e
4733 Author: Stefan Roese <sr@denx.de>
4734 Date: Mon Nov 27 17:22:19 2006 +0100
4736 [PATCH] nand_wait() timeout fixes
4738 Two fixes for the nand_wait() function in
4739 drivers/nand/nand_base.c:
4741 1. Use correct timeouts. The original timeouts in Linux
4742 source are 400ms and 20ms not 40s and 20s
4744 2. Return correct error value in case of timeout. 0 is
4747 Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
4748 Signed-off-by: Stefan Roese <sr@denx.de>
4750 commit da5553b095bf04f4f109ad7e565dae3aba47b230
4751 Author: Stefan Roese <sr@denx.de>
4752 Date: Mon Nov 27 17:04:06 2006 +0100
4754 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
4756 This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
4757 arguments to bootm. It removes the getenv("disable_of") test that used
4758 to be used for this purpose.
4760 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
4761 Acked-by: Jon Loeliger <jdl@freescale.com>
4763 commit a9398e018593782c5fa7d0741955fc1256b34c1e
4764 Author: Wolfgang Denk <wd@pollux.denx.de>
4765 Date: Mon Nov 27 15:32:42 2006 +0100
4767 Minor code cleanup. Update CHANGELOG.
4769 commit 1729b92cde575476684bffe819d0b7791b57bff2
4770 Author: Stefan Roese <sr@denx.de>
4771 Date: Mon Nov 27 14:52:04 2006 +0100
4773 [PATCH] 4xx: Fix problem with board specific reset code (now for real)
4775 Signed-off-by: Stefan Roese <sr@denx.de>
4777 commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
4778 Author: Stefan Roese <sr@denx.de>
4779 Date: Mon Nov 27 14:49:51 2006 +0100
4781 [PATCH] alpr: remove unused board specific flash driver
4783 Signed-off-by: Stefan Roese <sr@denx.de>
4785 commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
4786 Author: Stefan Roese <sr@denx.de>
4787 Date: Mon Nov 27 14:48:41 2006 +0100
4789 [PATCH] 4xx: Fix problem with board specific reset code
4791 Signed-off-by: Stefan Roese <sr@denx.de>
4793 commit ec0c2ec725aec9524a177a77ce75559e644a931a
4794 Author: Stefan Roese <sr@denx.de>
4795 Date: Mon Nov 27 14:46:06 2006 +0100
4797 [PATCH] Remove testing 4xx enet PHY setup
4799 Signed-off-by: Stefan Roese <sr@denx.de>
4801 commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
4802 Author: Stefan Roese <sr@denx.de>
4803 Date: Mon Nov 27 14:12:17 2006 +0100
4805 [PATCH] Update Prodrive ALPR board support (440GX)
4807 Signed-off-by: Stefan Roese <sr@denx.de>
4809 commit 78d620ebb5871d252270dedfad60c6568993b780
4810 Author: Wolfgang Denk <wd@atlas.denx.de>
4811 Date: Thu Nov 23 22:58:58 2006 +0100
4813 Updates for TQM5200 modules:
4814 - fix off-by-one error in board/tqm5200/cam5200_flash.c error message
4815 - simplify "udate" definitions
4817 commit 2053283304eeddf250d109e6791eb6fa4cad14f7
4818 Author: Stefan Roese <sr@denx.de>
4819 Date: Wed Nov 22 13:20:50 2006 +0100
4821 [PATCH] PPC4xx start.S: Fix for processor errata
4823 Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
4824 errata 1.12: 440_33 by moving patch up in code.
4826 Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
4827 Signed-off-by: Stefan Roese <sr@denx.de>
4829 commit 4ef6251403f637841000e0fef9e832aa01339822
4830 Author: Stefan Roese <sr@denx.de>
4831 Date: Mon Nov 20 20:39:52 2006 +0100
4833 [PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
4835 Signed-off-by: Stefan Roese <sr@denx.de>
4837 commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
4838 Author: Wolfgang Denk <wd@pollux.denx.de>
4839 Date: Mon Nov 20 10:28:30 2006 +0100
4843 commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
4844 Author: Stefan Roese <sr@denx.de>
4845 Date: Mon Nov 13 13:55:24 2006 +0100
4847 [PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
4849 * Adds support for AMD command set Top Boot flash geometry reversal
4850 * Adds support for reading JEDEC Manufacturer ID and Device ID
4851 * Adds support for displaying command set, manufacturer id and
4853 * Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
4854 * Removes outdated change history (refer to git log instead)
4856 Signed-off-by: Tolunay Orkun <listmember@orkun.us>
4857 Signed-off-by: Stefan Roese <sr@denx.de>
4859 commit b21b511d4c50408f4853f46f06b601272196223f
4860 Author: Wolfgang Denk <wd@pollux.denx.de>
4861 Date: Sun Nov 12 21:13:23 2006 +0100
4865 commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
4866 Author: Bartlomiej Sieka <tur@semihalf.com>
4867 Date: Sat Nov 11 22:48:22 2006 +0100
4869 Disable the watchdog in the default config for the V38B board.
4871 commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
4872 Author: Bartlomiej Sieka <tur@semihalf.com>
4873 Date: Sat Nov 11 22:43:00 2006 +0100
4875 Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
4876 group is enabled for USB earlier (in cpu_init_f() instead of
4877 usb_lowlevel_init()).
4879 commit 91650b3e4de688038d4f71279c44858e3e2c6870
4880 Author: Wolfgang Denk <wd@pollux.denx.de>
4881 Date: Mon Nov 6 17:06:36 2006 +0100
4883 Sequential accesses to non-existent memory must be synchronized,
4884 at least on G2 cores.
4886 This fixes get_ram_size() problems on MPC5200 Rev. B boards.
4888 commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
4889 Author: Timur Tabi <timur@freescale.com>
4890 Date: Fri Nov 3 19:15:00 2006 -0600
4892 mpc83xx: Update 83xx to use fsl_i2c.c
4894 Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
4895 cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
4896 Added multiple I2C bus support to fsl_i2c.c.
4898 Signed-off-by: Timur Tabi <timur@freescale.com>
4900 commit d239d74b1c937984bc519083a8e7de373a390f06
4901 Author: Timur Tabi <timur@freescale.com>
4902 Date: Fri Nov 3 12:00:28 2006 -0600
4904 mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
4906 Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
4907 tree matches the other 8xxx trees.
4909 Signed-off-by: Timur Tabi <timur@freescale.com>
4911 commit f7fb2e703ec9688541416962724adff70a7322cb
4912 Author: Kim Phillips <kim.phillips@freescale.com>
4913 Date: Thu Nov 2 19:47:11 2006 -0600
4915 mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
4917 commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
4918 Author: Dave Liu <daveliu@freescale.com>
4919 Date: Thu Nov 2 18:05:50 2006 -0600
4921 mpc83xx: Fix the incorrect dcbz operation
4923 The 834x rev1.x silicon has one CPU5 errata.
4925 The issue is when the data cache locked with
4926 HID0[DLOCK], the dcbz instruction looks like no-op inst.
4928 The right behavior of the data cache is when the data cache
4929 Locked with HID0[DLOCK], the dcbz instruction allocates
4932 The 834x rev3.0 and later and 8360 have not this bug inside.
4934 So, when 834x rev3.0/8360 are working with ECC, the dcbz
4935 instruction will corrupt the stack in cache, the processor will
4938 However, the 834x rev1.x can work with ECC with these code,
4939 because the sillicon has this cache bug. The dcbz will not
4940 corrupt the stack in cache.
4941 Really, it is the fault code running on fault sillicon.
4943 This patch fix the incorrect dcbz operation. Instead of
4944 CPU FP writing to initialise the ECC.
4947 * Fix the incorrect dcbz operation instead of CPU FP
4948 writing to initialise the ECC memory. Otherwise, it
4949 will corrupt the stack in cache, The processor will checkstop
4952 Signed-off-by: Dave Liu <daveliu@freescale.com>
4954 commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
4955 Author: Kim Phillips <kim.phillips@freescale.com>
4956 Date: Wed Nov 1 00:10:40 2006 -0600
4958 mpc83xx: add OF_FLAT_TREE bits to 83xx boards
4960 add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
4961 STDOUT_PATH configuration bits to mpc8349emds,
4962 mpc8349itx, and mpc8360emds board code.
4964 redo environment to use bootm with the fdtaddr
4965 for booting ARCH=powerpc kernels by default,
4966 and provide default fdtaddr values.
4968 commit 48041365b3420589ad464ebc7752e0053538b729
4969 Author: Kim Phillips <kim.phillips@freescale.com>
4970 Date: Wed Nov 1 00:07:25 2006 -0600
4972 mpc83xx: change ft code to modify local-mac-address property
4974 Update 83xx OF code to update local-mac-address properties
4975 for ethernet instead of the obsolete 'address' property.
4977 commit 9ca880a250870a7d55754291b5591d2b5fe89b54
4978 Author: Timur Tabi <timur@freescale.com>
4979 Date: Tue Oct 31 21:23:16 2006 -0600
4981 mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
4983 This patch also adds an improved I2C set_speed(), which handles all clock
4986 Signed-off-by: Timur Tabi <timur@freescale.com>
4988 commit ac4b5622ce050b5ee1e154b98df630d778661632
4989 Author: Dave Liu <daveliu@freescale.com>
4990 Date: Tue Oct 31 19:54:59 2006 -0600
4992 mpc83xx: add the README.mpc8360emds
4994 add doc/README.mpc8360emds to accompany the new board support
4996 commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
4997 Author: Dave Liu <daveliu@freescale.com>
4998 Date: Fri Nov 3 12:11:15 2006 -0600
5000 mpc83xx: add QE ethernet support
5002 this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
5004 commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
5005 Author: Dave Liu <daveliu@freescale.com>
5006 Date: Fri Nov 3 19:33:44 2006 -0600
5008 mpc83xx: Add MPC8360EMDS basic board support
5010 Add support for the Freescale MPC8360EMDS board.
5011 Includes DDR, DUART, Local Bus, PCI.
5013 commit 23892e49352de74f7fac36ff90bb1be143d195e3
5014 Author: Dave Liu <daveliu@freescale.com>
5015 Date: Tue Oct 31 19:30:40 2006 -0600
5017 mpc83xx: add the QUICC Engine (QE) immap file
5019 common QE immap file. Also required for 8360.
5021 commit b701652a4992bdcc62fb1a6038a85beef9e55da4
5022 Author: Dave Liu <daveliu@freescale.com>
5023 Date: Tue Oct 31 19:25:38 2006 -0600
5025 mpc83xx: Add 8360 specifics to 83xx immap
5027 Mainly add QE device dependencies, with appropriate 8360 protection.
5030 commit 988833324a7fda482c8ac3ca23eb539f8232e404
5031 Author: Timur Tabi <timur@freescale.com>
5032 Date: Tue Oct 31 19:14:41 2006 -0600
5034 mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
5036 PREREQUISITE PATCHES:
5038 * This patch can only be applied after the following patches have been applied:
5040 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
5041 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
5045 * For the 8349E-mITX, fix some size values in pci_init_board(), enable
5046 the clock for the 2nd USB board (Linux kernel will hang otherwise),
5047 and fix the CONFIG_BOOTARGS macro.
5049 Signed-off-by: Timur Tabi <timur@freescale.com>
5051 commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
5052 Author: Timur Tabi <timur@freescale.com>
5053 Date: Tue Oct 31 18:44:42 2006 -0600
5055 mpc83xx: Add support for the MPC8349E-mITX
5057 PREREQUISITE PATCHES:
5059 * This patch can only be applied after the following patches have been applied:
5061 1) DNX#2006090742000024 "Add support for multiple I2C buses"
5062 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
5063 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
5064 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
5065 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
5069 * Add support for the Freescale MPC8349E-mITX reference design platform.
5070 The second TSEC (Vitesse 7385 switch) is not supported at this time.
5072 Signed-off-by: Timur Tabi <timur@freescale.com>
5074 commit 183da6d9b446cc12123455844ad1187e2375626f
5075 Author: Ben Warren <bwarren@qstreams.com>
5076 Date: Tue Sep 12 10:15:53 2006 -0400
5078 Additional MPC8349 support for multibus i2c
5082 Here is a patch for a file that was accidentally left out of a previous
5085 It accompanies the patch with ticket DNX#2006090742000024
5088 Change PCI initialization to use new multi-bus I2C API.
5093 commit b24f119d672b709d153ff2ac091d4aa63ec6877d
5094 Author: Ben Warren <bwarren@qstreams.com>
5095 Date: Thu Sep 7 16:51:04 2006 -0400
5097 Multi-bus I2C implementation of MPC834x
5101 Attached is a patch implementing multiple I2C buses on the MPC834x CPU
5102 family and the MPC8349EMDS board in particular.
5103 This patch requires Patch 1 (Add support for multiple I2C buses).
5104 Testing was performed on a 533MHz board.
5106 /*** Note: This patch replaces ticket DNX#2006083042000027 ***/
5108 Signed-off-by: Ben Warren <bwarren@qstreams.com>
5111 Implemented driver-level code to support two I2C buses on the
5112 MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
5113 are 50kHz, 100kHz and 400kHz on each bus.
5118 commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
5119 Author: Ben Warren <bwarren@qstreams.com>
5120 Date: Thu Sep 7 16:50:54 2006 -0400
5122 Add support for multiple I2C buses
5126 Attached is a patch providing support for multiple I2C buses at the
5127 command level. The second part of the patch includes an implementation
5128 for the MPC834x CPU and MPC8349EMDS board.
5130 /*** Note: This patch replaces ticket DNX#2006083042000018 ***/
5132 Signed-off-by: Ben Warren <bwarren@qstreams.com>
5136 1. Include new 'i2c' command (based on USB implementation) using
5137 CONFIG_I2C_CMD_TREE.
5139 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
5140 the commands to change bus number and speed are only available under the
5141 new 'i2c' command mentioned in the first bullet.
5143 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
5144 systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
5145 of an array of bus-device pairs. Otherwise, it is an array of uchar.
5148 Added new 'i2c' master command for all I2C interaction. This is
5149 conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
5150 setting I2C bus speed as well as changing the active bus if the board
5151 has more than one (conditionally compiled with
5152 CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
5158 commit bed85caf872714ebf53013967a695c9d63acfc68
5159 Author: Timur Tabi <timur@freescale.com>
5160 Date: Tue Oct 31 18:13:36 2006 -0600
5162 mpc83xx: Add support for Errata DDR6 on MPC 834x systems
5166 * Errata DDR6, which affects all current MPC 834x processors, lists changes
5167 required to maintain compatibility with various types of DDR memory. This
5168 patch implements those changes.
5170 Signed-off-by: Timur Tabi <timur@freescale.com>
5172 commit afd6e470f639883002c7c59d562690a5cb0f4865
5173 Author: Timur Tabi <timur@freescale.com>
5174 Date: Wed Oct 25 18:45:23 2006 -0500
5176 mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
5178 commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
5179 Author: Timur Tabi <timur@freescale.com>
5180 Date: Tue Aug 22 17:07:00 2006 -0500
5182 mpc83xx: Add support for variable flash memory sizes on 83xx systems
5186 * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
5187 window registers, instead of using a hard-coded value of 8MB.
5189 Signed-off-by: Timur Tabi <timur@freescale.com>
5191 commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
5192 Author: Tanya Jiang <tanya.jiang@freescale.com>
5193 Date: Thu Aug 3 18:38:13 2006 +0800
5195 mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
5197 Unified TQM834x variable names with 83xx and consolidated macro
5198 in preparation for the 8360 and other upcoming 83xx devices.
5200 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
5202 commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
5203 Author: Dave Liu <daveliu@freescale.com>
5204 Date: Wed Oct 25 14:41:21 2006 -0500
5206 mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
5208 Incorporated the common unified variable names and the changes in preparation
5209 for releasing mpc8360 patches.
5211 Signed-off-by: Dave Liu <daveliu@freescale.com>
5213 commit 3894c46c27c64891f93ac04edde86a9fa9758d92
5214 Author: Tanya Jiang <tanya.jiang@freescale.com>
5215 Date: Thu Aug 3 18:36:02 2006 +0800
5217 mpc83xx: Fix missing build for mpc8349emds pci.c
5219 Make pci build for mpc8349emds
5221 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
5223 commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
5224 Author: Tanya Jiang <tanya.jiang@freescale.com>
5225 Date: Thu Aug 3 18:39:49 2006 +0800
5227 mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
5229 Removed unused file resetvec.S for mpc83xx cpu
5231 Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
5233 commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
5234 Author: Nick Spence <Nick.Spence@freescale.com>
5235 Date: Sat Sep 30 00:32:59 2006 -0700
5237 NAND Flash verify across block boundaries
5239 This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
5241 and the write crosses a block boundary. The pointer to the verification
5242 buffer (bufstart) is not being updated to reflect the starting of the
5244 block so the verification of the second block fails.
5248 * Fix NAND FLASH page verification across block boundaries
5250 commit f484dc791a3932537213c43c654cc1295c64b84c
5251 Author: Nick Spence <nick.spence@freescale.com>
5252 Date: Thu Sep 7 07:39:46 2006 -0700
5254 Added RGMII support to the TSECs and Marvell 881111 Phy
5256 Added a phy initialization to adjust the RGMII RX and TX timing
5257 Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
5259 Signed-off-by: Nick Spence <nick.spence@freescale.com>
5261 commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
5262 Author: roy zang <tie-fei.zang@freescale.com>
5263 Date: Fri Nov 3 13:10:00 2006 +0800
5265 Remove some unused CFG define.
5268 commit 99c09c4dec34f77c243bf51bea532e3f339410ad
5269 Author: roy zang <tie-fei.zang@freescale.com>
5270 Date: Fri Nov 3 13:07:36 2006 +0800
5272 Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
5273 Both work. 0xFF000000 seems more reasonable.
5275 commit c59200443072353044aa4bf737a5a60f9a9af231
5276 Author: Wolfgang Denk <wd@pollux.denx.de>
5277 Date: Thu Nov 2 15:15:01 2006 +0100
5279 Release U-Boot 1.1.6
5281 commit c1fbe4103a0d6c8957f912af902d705ba67836f2
5282 Author: roy zang <tie-fei.zang@freescale.com>
5283 Date: Thu Nov 2 19:14:48 2006 +0800
5285 This patch comes from Yuli's posted patch on 8/8/2006
5286 titled "CFI Driver Little-Endian write Issue".
5288 http://sourceforge.net/mailarchive/message.php?msg_id=36311999
5290 If that patch applied, please discard this one.
5291 Until now , I do not see his patch is applied. So please apply this one.
5293 Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
5294 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5296 commit b825f158e449e1e9cf74c08e572955e122394c96
5297 Author: roy zang <tie-fei.zang@freescale.com>
5298 Date: Thu Nov 2 19:12:31 2006 +0800
5300 Tsi108 on chip i2c support.
5302 The i2c Interface provides a master-only, serial interface that can be
5303 used for initializing Tsi108/Tsi109 registers from an EEPROM after a
5306 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5307 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5309 commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
5310 Author: roy zang <tie-fei.zang@freescale.com>
5311 Date: Thu Nov 2 19:11:06 2006 +0800
5313 Tsi108 on chip pci controller support.
5315 If there is no pci card, the tsi108/109 pci configure read will
5316 cause a machine check exception to the processor. PCI error should
5317 also be cleared after the read.
5319 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5320 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5322 commit d1927cee977126e547ceeba23e4f978f377cfb8f
5323 Author: roy zang <tie-fei.zang@freescale.com>
5324 Date: Thu Nov 2 19:08:55 2006 +0800
5326 Tundra tsi108 on chip Ethernet controller support.
5328 The following is a brief description of the Ethernet controller:
5329 The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
5330 Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
5331 to manage the two physical connection devices (PHYs). Each Ethernet port
5332 has its own statistics monitor that tracks and reports key interface
5333 statistics. Each port supports a 256-entry hash table for address
5334 filtering. In addition, each port is bridged to the Switch Fabric
5335 through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
5337 Each Ethernet port also has a pair of internal Ethernet DMA channels to
5338 support the transmit and receive data flows. The Ethernet DMA channels
5339 use descriptors set up in memory, the memory map of the device, and
5340 access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
5341 handles arbitration for the Switch Fabric. The Controller also
5342 has a register businterface for register accesses and status monitor
5345 The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
5346 modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
5347 The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
5348 data flows to and from the Ethernet Controller through the Switch Fabric.
5350 Each Ethernet port uses its transmit and receive DMA channels to manage
5351 data flows through buffer descriptors that are predefined by the
5352 system (the descriptors can exist anywhere in the system memory map).
5353 These descriptors are data structures that point to buffers filled
5354 with data ready to transmit over Ethernet, or they point to empty
5355 buffers ready to receive data from Ethernet.
5357 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5358 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5360 commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
5361 Author: roy zang <tie-fei.zang@freescale.com>
5362 Date: Thu Nov 2 19:01:33 2006 +0800
5364 Tundra tsi108 header file.
5366 The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
5367 PowerPC processors that offers numerous system interconnect options for
5368 embedded application designers. The Tsi108 can interconnect 60x or
5369 MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
5370 and Flash. Provided the macro define for tsi108 chip.
5372 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5373 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5375 commit 87c4db09699c6b89176b31004afcb83eb1585d47
5376 Author: roy zang <tie-fei.zang@freescale.com>
5377 Date: Thu Nov 2 18:59:15 2006 +0800
5379 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
5380 mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
5382 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5383 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5385 commit 27801b8ab11c61b577e45742a515bb3b23b80241
5386 Author: roy zang <tie-fei.zang@freescale.com>
5387 Date: Thu Nov 2 18:57:21 2006 +0800
5389 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
5390 Make ,config.mk and link file for the mpc7448hpc2 board.
5392 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5393 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5395 commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
5396 Author: roy zang <tie-fei.zang@freescale.com>
5397 Date: Thu Nov 2 18:55:04 2006 +0800
5399 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
5400 The mpc7448hpc2 board support header file.
5402 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5403 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5405 commit 625bb5ddb50b243f931262ca8c46956409471917
5406 Author: roy zang <tie-fei.zang@freescale.com>
5407 Date: Thu Nov 2 18:52:21 2006 +0800
5409 Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
5410 The mpc7448hpc2 board support low level assemble language init code.
5412 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5413 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5415 commit 4c52783b3d024e153c4972b97332e314bc3bdc46
5416 Author: roy zang <tie-fei.zang@freescale.com>
5417 Date: Thu Nov 2 18:49:51 2006 +0800
5419 General code modification for mpc7448hpc2 board support.
5420 1. Add 7447A and 7448 processor support.
5421 2. Add the following flags.
5423 CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
5424 (such as by switch on board), this flag should be set.
5426 CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
5427 relocates to RAM, this flag should be set.
5429 CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
5430 system hang in exception, this flag should be set.
5432 There is a design issue for tsi108/109 pci configure read. When pci scan
5433 the slots, if there is no pci card, the tsi108/9 will cause a machine
5434 check exception for mpc7448 processor.
5436 Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
5437 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5439 commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
5440 Author: roy zang <tie-fei.zang@freescale.com>
5441 Date: Thu Nov 2 18:34:47 2006 +0800
5443 Add README file for mpc7448hpc2 board.
5444 Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
5446 commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
5447 Author: Bartlomiej Sieka <tur@semihalf.com>
5448 Date: Wed Nov 1 02:04:38 2006 +0100
5450 Finish up support for MarelV38B board
5451 - add watchdog support
5452 - enable GPIO_WKUP_7 pin for input
5455 commit ffa150bc90c943ca265170bd1be3f293674dd5c7
5456 Author: Bartlomiej Sieka <tur@semihalf.com>
5457 Date: Wed Nov 1 01:45:46 2006 +0100
5459 - Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
5460 * remove warnings when compiling ethaddr.c
5461 * adjust linker script (fixes a crash resulting from incorrect
5462 definition of __u_boot_cmd_start)
5463 - Some MarelV38B code cleanup.
5465 commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
5466 Author: Bartlomiej Sieka <tur@semihalf.com>
5467 Date: Wed Nov 1 01:38:16 2006 +0100
5469 - Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
5470 MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
5471 Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
5472 MPC5XXX_WU_GPIO_DATA_O for affected boards.
5474 - Add defintions for some MPC5XXX GPIO pins.
5476 commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
5477 Author: Bartlomiej Sieka <tur@semihalf.com>
5478 Date: Wed Nov 1 01:34:29 2006 +0100
5480 Changed MarelV38B board make target to lowercase. Config file cleanup.
5482 commit 1954be6e9c9421b45d0a9d05b10356acc7563150
5483 Author: Wolfgang Denk <wd@pollux.denx.de>
5484 Date: Sun Oct 29 01:03:51 2006 +0200
5486 Automatically adjust ARFLAGS so "make -s" is really silent.
5488 commit fae684e89844856383bdf101440889557df3e6b1
5489 Author: Stefan Roese <sr@denx.de>
5490 Date: Sat Oct 28 16:45:00 2006 +0200
5492 [PATCH] omap925.c: Remove unused functions
5494 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
5495 Signed-off-by: Stefan Roese <sr@denx.de>
5497 commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
5498 Author: Stefan Roese <sr@denx.de>
5499 Date: Sat Oct 28 17:12:58 2006 +0200
5501 [PATCH] Add some missing machtypes for netstar & voiceblue boards
5503 Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
5506 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
5507 Signed-off-by: Stefan Roese <sr@denx.de>
5509 commit 856f054410cef52d868feb330168b2a4c4091328
5510 Author: Stefan Roese <sr@denx.de>
5511 Date: Sat Oct 28 15:55:52 2006 +0200
5513 [PATCH] NAND: Partition name support added to NAND subsystem
5515 chpart, nboot and NAND subsystem related commands now accept also partition
5516 name to specify offset.
5518 Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
5519 Signed-off-by: Stefan Roese <sr@denx.de>
5521 commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
5522 Author: Wolfgang Denk <wd@pollux.denx.de>
5523 Date: Sat Oct 28 02:29:44 2006 +0200
5527 commit 2751a95abd1b96911081c357e96a12fa97b40dee
5528 Author: Wolfgang Denk <wd@pollux.denx.de>
5529 Date: Sat Oct 28 02:29:14 2006 +0200
5531 Enable commandline editing and hush shell on all TQM boards.
5533 commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
5534 Author: Wolfgang Denk <wd@pollux.denx.de>
5535 Date: Sat Oct 28 02:28:02 2006 +0200
5537 README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
5539 commit 471a7be7a042e95e440f5de969c9765214ae8d6e
5540 Author: Wolfgang Denk <wd@denx.de>
5541 Date: Sat Oct 28 01:14:32 2006 +0200
5543 Check for illegal character '=' in environment variable names.
5545 Make sure the string passed as variable name does not contain a '='
5546 character. This not only prevents the common error or typing
5547 "setenv foo=bar" instead of "setenv foo bar", but (more importantly)
5548 also closes a backdoor which allowed to delete write-protected
5549 environment variables, for example by using "setenv ethaddr=".
5551 commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
5552 Author: Wolfgang Denk <wd@pollux.denx.de>
5553 Date: Sat Oct 28 00:38:39 2006 +0200
5557 commit e11887a77d81077416a2d1c5e0354916fee8c034
5558 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5559 Date: Thu Oct 26 17:55:31 2006 +0200
5561 Don't pass any debug options directly to the assembler
5563 When passing the -g option to gcc, gcc automatically selects a
5564 suitable --g<format> option to pass on to the assembler.
5565 Thus, there's no point in forcing a specific debug option on the
5566 assembler using the -Wa mechanism.
5568 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5570 commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
5571 Author: Jon Loeliger <jdl@freescale.com>
5572 Date: Fri Oct 27 07:47:22 2006 -0500
5574 MPC86xx: Cleaned up unused and conditionally used local variables.
5576 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5578 commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
5579 Author: Wolfgang Denk <wd@pollux.denx.de>
5580 Date: Fri Oct 27 11:55:21 2006 +0200
5582 Fix "ar" flags in some Makefiles to allow for silent "make -s"
5584 commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
5585 Author: Ben Warren <bwarren@qstreams.com>
5586 Date: Thu Oct 26 14:38:25 2006 -0400
5588 Fix TSEC driver (now for real): avoid crashes if PHY is not attached
5589 to a TSEC (e.g. a switch is connected via RMII) or
5590 if the PHY is defective/incorrectly configured.
5592 Signed-off-by: Ben Warren <bwarren@qstreams.com>
5594 commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
5595 Author: Ben Warren <bwarren@qstreams.com>
5596 Date: Thu Oct 26 14:38:25 2006 -0400
5598 Fix TSEC driver: avoid crashes if PHY is not attached
5599 to a TSEC (e.g. a switch is connected via RMII) or
5600 if the PHY is defective/incorrectly configured.
5602 Signed-off-by: Ben Warren <bwarren@qstreams.com>
5604 commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
5605 Author: Wolfgang Denk <wd@pollux.denx.de>
5606 Date: Thu Oct 26 16:24:31 2006 +0200
5610 commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
5611 Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
5612 Date: Wed Oct 25 15:48:59 2006 +0200
5614 Finish up support for the ATSTK1000/ATSTK1002 boards
5616 Add atstk1002_config target to Makefile and move the AVR32 section
5617 down below Blackfin so that it doesn't end up in the middle of
5620 Drop the autogenerated linker script thing for now. Will have to
5621 revisit how to handle chips with different flash and RAM layout
5624 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5626 commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
5627 Author: Kumar Gala <galak@kernel.crashing.org>
5628 Date: Tue Oct 24 23:47:37 2006 -0500
5630 Added support for Multi-Image files that contain a device tree
5632 If a Multi-Image file contains a third image we try to use it as a
5633 device tree. The device tree image is assumed to be uncompressed in the
5634 image file. We automatically allocate space for the device tree in memory
5635 and provide an 8k pad to allow more than a reasonable amount of growth.
5637 Additionally, a device tree that was contained in flash will now automatically
5638 get copied to system memory as part of boot. Previously an error was
5639 reported if one tried to boot a device tree that was in flash.
5641 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
5643 commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
5644 Author: Wolfgang Denk <wd@denx.de>
5645 Date: Tue Oct 24 21:35:55 2006 +0200
5647 Switch to automatically generated CHANGELOG file.
5648 (use "make CHANGELOG" to update it from time to time)
5650 commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
5651 Author: Stefan Roese <sr@denx.de>
5652 Date: Tue Oct 24 18:06:48 2006 +0200
5654 Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
5655 Patch by Stefan Roese, 24 Oct 2006
5657 commit 8ae3b713b2286e0c3213b7802062e4c1599010de
5658 Author: Wolfgang Denk <wd@pollux.denx.de>
5659 Date: Tue Oct 24 17:24:55 2006 +0200
5661 Merge with /home/wd/git/u-boot/master
5663 commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
5664 Author: Wolfgang Denk <wd@pollux.denx.de>
5665 Date: Tue Oct 24 15:32:57 2006 +0200
5669 commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
5670 Author: Wolfgang Denk <wd@pollux.denx.de>
5671 Date: Tue Oct 24 14:51:36 2006 +0200
5673 Move atstk1000 files into vendor specific directory.
5674 Patch by Haavard Skinnemoen, 12 Sep 2006
5676 commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
5677 Author: Wolfgang Denk <wd@pollux.denx.de>
5678 Date: Tue Oct 24 14:42:37 2006 +0200
5680 Add ATSTK1000 and ATSTK1002 board support
5681 Patch by Haavard Skinnemoen, 06 Sep 2006
5683 This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
5686 ATSTK1000 is a full-featured development board for AT32AP CPUs. It
5687 has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
5688 and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
5689 CompactFlash cards. For more information, please see this page:
5691 http://www.atmel.com/dyn/products/tools.asp?family_id=682
5693 The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
5696 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5698 commit f93ae788c3640fcde5db383471d45548ff4060d0
5699 Author: Wolfgang Denk <wd@pollux.denx.de>
5700 Date: Tue Oct 24 14:31:24 2006 +0200
5702 Add common serial driver for Atmel AT32 and AT91 chips
5703 Patch by Haavard Skinnemoen, 06 Sep 2006
5705 This is a first attempt at creating a common serial driver for Atmel
5706 chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
5707 be possible to support AT91RM9200 and other ARM-based chips with some
5708 minor modifications.
5710 There's nothing fundamentally AVR32-specific in this driver, but it
5711 does use some features which are currently only defined for the
5713 * pm_get_clock_freq: Obtain the clock frequency of a given domain
5714 * gd->console_uart: A "struct device" containing information about
5715 register mappings, gpio resources and clocks associated with the
5718 For more information about these features, please see the "AT32AP
5721 commit 72a087e04705c26cad982879ebd06b5281bf825a
5722 Author: Wolfgang Denk <wd@pollux.denx.de>
5723 Date: Tue Oct 24 14:27:35 2006 +0200
5725 Add AT32AP CPU and AT32AP7000 SoC support
5726 Patch by Haavard Skinnemoen, 06 Sep 2006
5728 This patch adds support for the AT32AP CPU family and the AT32AP7000
5729 chip, which is the first chip implementing the AVR32 architecture.
5731 The AT32AP CPU core is a high-performance implementation featuring a
5732 7-stage pipeline, separate instruction- and data caches, and a MMU.
5733 For more information, please see the "AVR32 AP Technical Reference":
5735 http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
5737 In addition to this, the AT32AP7000 chip comes with a large set of
5738 integrated peripherals, many of which are shared with the AT91 series
5739 of ARM-based microcontrollers from Atmel. Full data sheet is
5742 http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
5744 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5746 commit 7b64fef33c66be648826c0ff9758298ef13d0604
5747 Author: Wolfgang Denk <wd@pollux.denx.de>
5748 Date: Tue Oct 24 14:21:16 2006 +0200
5750 Add AVR32 architecture support
5751 Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
5753 This patch adds common infrastructure code for the Atmel AVR32
5754 architecture. See doc/README.AVR32 for details.
5756 Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
5758 commit 2da2d9a4766063b9848f3a35ad6025499cf87265
5759 Author: Wolfgang Denk <wd@pollux.denx.de>
5760 Date: Tue Oct 24 13:57:33 2006 +0200
5762 Use -g instead of -gstabs in AFLAGS_DEBUG
5763 Patch by Haavard Skinnemoen, 30 Aug 2006
5765 In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
5766 matter what the target's preferred debugging format is. This patch
5767 simply replaces -gstabs with -g, so that the default debugging format
5768 for the architecture is used.
5770 commit 965829872169c2996023840d98e1d85ad148d629
5771 Author: Wolfgang Denk <wd@pollux.denx.de>
5772 Date: Tue Oct 24 13:55:18 2006 +0200
5774 Fix/workaround broken dependency handling with make 3.81
5775 Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
5777 commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
5778 Author: Marian Balakowicz <m8@semihalf.com>
5779 Date: Mon Oct 23 22:17:05 2006 +0200
5781 Fix sequoia separate object direcory building problems.
5783 commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
5784 Author: Jon Loeliger <jdl@freescale.com>
5785 Date: Fri Oct 20 17:16:35 2006 -0500
5787 Use generic I2C register block on 85xx and 86xx.
5789 Replace private IMMAP I2C structures with generic reg block
5790 and allow 86xx to have multiple I2C device busses.
5792 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5794 commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
5795 Author: Jon Loeliger <jdl@freescale.com>
5796 Date: Fri Oct 20 15:54:34 2006 -0500
5798 Fix compilation warnings on a few 85xx boards.
5800 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5802 commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
5803 Author: Jon Loeliger <jdl@freescale.com>
5804 Date: Fri Oct 20 15:50:15 2006 -0500
5806 Converted all 85xx boards to use a common FSL I2C driver.
5807 Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
5808 And removed hard i2c path from a few u-boot.lds scipts too.
5809 Minor whitespace cleanups along the way.
5811 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5813 commit 4d45f69e362b05892c9e92a7907e5820995612aa
5814 Author: Jon Loeliger <jdl@freescale.com>
5815 Date: Thu Oct 19 12:02:24 2006 -0500
5817 Rewrite a series of goto statements as a sequences of
5818 conditional expressions instead.
5820 Use consistent return code 0/-1 for good/bad indicators.
5822 Include one fewer file if the driver isn't used at all.
5824 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5826 commit 7237c033b02fe295880435f1eb80819a0c987532
5827 Author: Jon Loeliger <jdl@freescale.com>
5828 Date: Thu Oct 19 11:02:16 2006 -0500
5830 Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
5832 in an effort to begin to unify the umpteen FSL I2C drivers that
5833 are all otherwise very similar.
5835 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5837 commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
5838 Author: Jon Loeliger <jdl@freescale.com>
5839 Date: Thu Oct 19 11:33:52 2006 -0500
5841 * Fix a bunch of compiler warnings for gcc 4.0
5843 Signed-off-by: Matthew McClintock <msm@freescale.com>
5845 commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
5846 Author: Stefan Roese <sr@denx.de>
5847 Date: Tue Oct 17 06:14:31 2006 +0200
5849 Add monitor functions for indirect access to PPC440 DCR's
5850 Patch by Leonid Baryudin, 12 Oct 2006
5852 commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
5853 Author: Jon Loeliger <jdl@freescale.com>
5854 Date: Fri Oct 13 16:47:53 2006 -0500
5856 Fixed leading whitespace issues.
5857 Removed spurious LAWAR thing.
5859 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5861 commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
5862 Author: Jon Loeliger <jdl@freescale.com>
5863 Date: Thu Oct 12 10:42:36 2006 -0500
5865 Remove unneeded include files and local variable.
5867 Signed-off-by: Jon Loeliger <jdl@freescale.com>
5869 commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
5870 Author: Grant Likely <grant.likely@secretlab.ca>
5871 Date: Tue Oct 10 00:23:32 2006 -0600
5873 Fix possible uninitialized variable compiler warning.
5875 When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
5876 do_bootm_linux() may be uninitialized. There is no possibility in the
5877 current code that len will get used uninitialized, but this fix follows
5878 the existing convention of setting both len and data to zero at the same
5881 Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
5883 commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
5884 Author: Matthew McClintock <msm@freescale.com>
5885 Date: Wed Oct 11 15:13:01 2006 -0500
5887 * Fix a bunch of compiler warnings for gcc 4.0
5889 Signed-off-by: Matthew McClintock <msm@freescale.com>
5891 commit bf651baa365e5447246aad6a633ccd667cf24a39
5892 Author: Jon Loeliger <jdl@freescale.com>
5893 Date: Wed Oct 11 10:10:43 2006 -0500
5895 Move "ar" flags to config.mk to allow for silent "make -s"
5897 commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
5898 Author: Jon Loeliger <jdl@freescale.com>
5899 Date: Tue Oct 10 17:19:03 2006 -0500
5901 Coding style changes to remove local varible blocks
5902 and reformat a bit nicer.
5904 commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
5905 Author: Jon Loeliger <jdl@freescale.com>
5906 Date: Tue Oct 10 17:16:04 2006 -0500
5908 Fix whitespace issues.
5910 commit 7b382b7125f2397cce63253df62f183e3dfa2770
5911 Author: Jon Loeliger <jdl@freescale.com>
5912 Date: Tue Oct 10 17:14:45 2006 -0500
5914 Fix whitespace issues.
5916 commit e10390ddd736b0dad1528eec4b0fe35c0827139a
5917 Author: Jon Loeliger <jdl@freescale.com>
5918 Date: Tue Oct 10 17:06:53 2006 -0500
5920 Fix whitespace issues.
5922 commit 89875e96ba3f023157bf50d5f8e33bf254964a76
5923 Author: Jon Loeliger <jdl@freescale.com>
5924 Date: Tue Oct 10 17:03:43 2006 -0500
5926 Ran lindent and cleaned up whitespace issues.
5927 Format for 80-columns too.
5929 commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
5930 Author: Jon Loeliger <jdl@freescale.com>
5931 Date: Tue Oct 10 17:02:22 2006 -0500
5933 Fix whitespace and 80-col issues.
5935 commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
5936 Author: Stefan Roese <sr@denx.de>
5937 Date: Sat Oct 7 11:36:51 2006 +0200
5939 CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
5940 Patch by Stefan Roese, 07 Oct 2006
5942 commit 5bc528fa4da751d472397b308137238a6465afd2
5943 Author: Stefan Roese <sr@denx.de>
5944 Date: Sat Oct 7 11:35:25 2006 +0200
5946 Update ALPR code (NAND support working now)
5947 Patch by Stefan Roese, 07 Oct 2006
5949 commit 77d5034847d328753b80c46b83f960a14a26f40e
5950 Author: Stefan Roese <sr@denx.de>
5951 Date: Sat Oct 7 11:33:03 2006 +0200
5953 Remove compile warnings in fpga code
5954 Patch by Stefan Roese, 07 Oct 2006
5956 commit f3443867e90d2979a7dd1c65b0d537777e1f9850
5957 Author: Stefan Roese <sr@denx.de>
5958 Date: Sat Oct 7 11:30:52 2006 +0200
5960 Add CONFIG_BOARD_RESET to configure board specific reset function
5961 Patch by Stefan Roese, 07 Oct 2006
5963 commit f55df18187e7a45cb73fec4370d12135e6691ae1
5964 Author: John Traill <john.traill@freescale.com>
5965 Date: Fri Sep 29 08:23:12 2006 +0100
5967 Fix missing tCycle/modfreq calculation.
5969 Signed-off-by: John Traill <john.traill@freescale.com>
5971 commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
5972 Author: Andy Fleming <afleming@freescale.com>
5973 Date: Wed Sep 13 10:33:35 2006 -0500
5975 Updated config headers to add default FDT-based booting
5977 commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
5978 Author: Andy Fleming <afleming@freescale.com>
5979 Date: Wed Sep 13 10:34:18 2006 -0500
5981 Add support for eTSEC 3 & 4 on 8548 CDS
5983 * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
5984 This will only work on rev 1.3 boards (but doesn't break older boards)
5985 * Cleaned up some comments to reflect the expanded role of tsec
5988 commit 084d648b109c8984f83674043c1a7fa3885ef801
5989 Author: Andy Fleming <afleming@freescale.com>
5990 Date: Wed Sep 13 10:33:56 2006 -0500
5992 Added code to support 2.6.18 PCI changes in u-boot
5994 * Added code to swizzle the IRQ map for the PCI
5996 commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
5997 Author: Jon Loeliger <jdl@freescale.com>
5998 Date: Tue Sep 19 09:34:10 2006 -0500
6000 Modified makefile for new build mechanism.
6002 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6004 commit d14ba6a798beb753e7a864500414fcc2d198b8bc
6005 Author: Jon Loeliger <jdl@freescale.com>
6006 Date: Thu Sep 14 08:40:36 2006 -0500
6008 Handle 86xx SVR values according to the new Reference Manual.
6009 Both 8641 and 8641D have SVR == 0x8090, and are distinguished
6010 by the byte in bits 16-23 instead.
6011 Thanks to Jason Jin for noticing.
6013 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6015 commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
6016 Author: Zhang Wei <wei.zhang@freescale.com>
6017 Date: Mon Aug 28 14:25:31 2006 +0800
6019 Fixed an OF-tree off-by-one bug when adding a new property name.
6020 This bug will cause the kernel booting to pause a long time.
6022 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
6023 (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
6025 commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
6026 Author: Jon Loeliger <jdl@freescale.com>
6027 Date: Tue Aug 29 11:05:09 2006 -0500
6029 Remove trailing empty lines.
6031 commit cd6d73d5b895a5935ac4fde0a356288142a584e0
6032 Author: Jon Loeliger <jdl@freescale.com>
6033 Date: Tue Aug 29 09:48:49 2006 -0500
6035 Remove bogus msync and use volatile asm.
6037 commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
6038 Author: Jon Loeliger <jdl@freescale.com>
6039 Date: Tue Aug 29 08:17:14 2006 -0500
6041 Add myself as maintainer for MPC8641HPCN.
6043 commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
6044 Author: Zhang Wei <wei.zhang@freescale.com>
6045 Date: Mon Aug 28 14:25:31 2006 +0800
6047 Fixed an OF-tree off-by-one bug when adding a new property name.
6048 This bug will cause the kernel booting to pause a long time.
6050 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
6052 commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
6053 Author: Haiying Wang <haiying.wang@freescale.com>
6054 Date: Fri Aug 25 14:38:34 2006 -0400
6056 Change ramdiskaddr and dtbaddr
6057 Remove PEX fluff commands.
6059 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
6060 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6062 commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
6063 Author: Matthew McClintock <msm@freescale.com>
6064 Date: Wed Aug 23 13:32:45 2006 -0500
6066 * Another small fix for booting with disable_of
6068 Signed-off-by: Matthew McClintock <msm@freescale.com>
6070 commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
6071 Author: Jon Loeliger <jdl@freescale.com>
6072 Date: Wed Aug 23 11:04:43 2006 -0500
6074 Cleanup and lindent new AHCI driver.
6076 commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
6077 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
6078 Date: Wed Aug 23 19:15:12 2006 +0800
6080 Add AHCI define and sata support for MPC8641HPCN board.
6082 Signed-off-by:Jason Jin<jason.jin@freescale.com>
6084 commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
6085 Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
6086 Date: Wed Aug 23 19:10:44 2006 +0800
6088 Add AHCI support to u-boot
6090 Add AHCI support in u-boot, enable the sata disk controllers which
6091 following the AHCI protocol.
6093 Signed-off-by:Jason Jin<jason.jin@freescale.com>
6095 commit d8ea2acf5f137cae99417df4f573d036ee384668
6096 Author: Zhang Wei <wei.zhang@freescale.com>
6097 Date: Wed Aug 23 17:54:32 2006 +0800
6099 Add dtb boot-up parameter to default boot commands.
6101 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
6103 commit b93775c2036b99baa390ea425c4771895bbc63c4
6104 Author: Jon Loeliger <jdl@freescale.com>
6105 Date: Tue Aug 22 18:26:08 2006 -0500
6107 Cleanup even more poorly introduced whitespace.
6109 commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
6110 Author: Jon Loeliger <jdl@freescale.com>
6111 Date: Tue Aug 22 18:07:00 2006 -0500
6113 Cleanup more poorly introduced whitespace.
6115 commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
6116 Author: Jon Loeliger <jdl@freescale.com>
6117 Date: Tue Aug 22 17:54:05 2006 -0500
6119 Cleanup poorly introduced whitespace.
6121 commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
6122 Author: Jon Loeliger <jdl@freescale.com>
6123 Date: Tue Aug 22 12:25:27 2006 -0500
6125 General indent and whitespace cleanups.
6127 commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
6128 Author: Jon Loeliger <jdl@freescale.com>
6129 Date: Tue Aug 22 12:06:18 2006 -0500
6131 General indent and whitespace cleanups.
6133 commit 41a0e8b304d3ff55fe27a230507aac79684016ac
6134 Author: Jon Loeliger <jdl@freescale.com>
6135 Date: Tue Aug 22 10:42:21 2006 -0500
6137 Cleanup compiler warnings.
6139 commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
6140 Author: Matthew McClintock <msm@freescale.com>
6141 Date: Tue Aug 22 09:31:59 2006 -0500
6143 Fix disable_of booting
6145 Signed-off-by: Matthew McClintock <msm@freescale.com>
6147 commit 87a449c8ac396420cb24260f717ea9e6faa82047
6148 Author: Matthew McClintock <msm@freescale.com>
6149 Date: Tue Aug 22 09:23:55 2006 -0500
6151 Support for FDT in uImage format, error when using FDT from flash
6153 Signed-off-by: Matthew McClintock <msm@freescale.com>
6155 commit 75c299c38369d01addd5e054b8a16217b70f4a86
6156 Author: Haiying Wang <haiying.wang@freescale.com>
6157 Date: Tue Aug 15 15:12:55 2006 -0400
6159 Unlock cache before kernel starts up for MPC86xx
6161 commit 67256678f00c09b0a7f19e862e5c1847553d31bc
6162 Author: Haiying Wang <haiying.wang@freescale.com>
6163 Date: Tue Aug 15 15:13:15 2006 -0400
6165 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
6167 commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
6168 Author: Haiying Wang <haiying.wang@freescale.com>
6169 Date: Tue Aug 15 15:12:55 2006 -0400
6171 Unlock cache before kernel starts up for MPC86xx
6173 commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
6174 Author: Haiying Wang <haiying.wang@freescale.com>
6175 Date: Tue Aug 15 15:13:15 2006 -0400
6177 Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
6179 commit 86c8e17f25e972a7e272950a0735fad84e082b88
6180 Author: Matthew McClintock <msm@freescale.com>
6181 Date: Wed Aug 16 13:59:47 2006 -0500
6183 * Fix disable_of booting
6185 Signed-off-by: Matthew McClintock <msm@freescale.com>
6187 commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
6188 Author: Matthew McClintock <msm@freescale.com>
6189 Date: Wed Aug 16 10:54:09 2006 -0500
6191 * Support for FDT in uImage format, error when using FDT from flash
6193 Signed-off-by: Matthew McClintock <msm@freescale.com>
6195 commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
6196 Author: Stefan Roese <sr@denx.de>
6197 Date: Tue Aug 15 14:22:35 2006 +0200
6199 Add initial support for the ALPR board from Prodrive
6200 NAND needs some additional testing
6201 Patch by Heiko Schocher, 15 Aug 2006
6203 commit f0ff4692ff3372dec55074a8eb444943ab095abb
6204 Author: Stefan Roese <sr@denx.de>
6205 Date: Tue Aug 15 14:15:51 2006 +0200
6207 Add FPGA Altera Cyclone 2 support
6208 Patch by Heiko Schocher, 15 Aug 2006
6210 commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
6211 Author: Jon Loeliger <jdl@freescale.com>
6212 Date: Mon Aug 14 15:33:38 2006 -0500
6214 Fix BAT0 to actually be cacheable, non-guarded as documented.
6216 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6218 commit 40bc83559db5745681909fd7382ae509567e116d
6219 Author: Jon Loeliger <jdl@freescale.com>
6220 Date: Wed Aug 9 15:32:16 2006 -0500
6222 Removed MPC8641HPCN DTS source file from build.
6223 It is no longer linked into U-Boot; its sources are
6224 now located in the kernel tree.
6226 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6228 commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
6229 Author: Matthew McClintock <msm@freescale.com>
6230 Date: Wed Jun 28 10:47:03 2006 -0500
6232 * Switched default PCI speed for 8540 ADS back to 33MHz
6234 * Added comments and a printf to warn that PCI-X won't
6236 Patch by Andy Fleming 17-Mar-2006
6238 Signed-off-by: Andy Fleming <afleming@freescale.com>
6240 commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
6241 Author: Matthew McClintock <msm@freescale.com>
6242 Date: Wed Jun 28 10:46:35 2006 -0500
6244 * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
6246 Signed-off-by: Andy Fleming <afleming@freescale.com>
6248 commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
6249 Author: Matthew McClintock <msm@freescale.com>
6250 Date: Wed Jun 28 10:46:13 2006 -0500
6252 * Added VIA configuration table
6254 * Added support for PCI2 on CDS
6255 Patch by Andy Fleming 17-Mar-2006
6257 Signed-off-by: Andy Fleming <afleming@freescale.com>
6259 commit c88f9fe66b64247e5b6a38410ba315ca25596d16
6260 Author: Matthew McClintock <msm@freescale.com>
6261 Date: Wed Jun 28 10:45:41 2006 -0500
6263 * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
6265 Signed-off-by: Andy Fleming <afleming@freescale.com>
6267 commit 97074ed9655309b64231bc2cee69fe85399f8055
6268 Author: Matthew McClintock <msm@freescale.com>
6269 Date: Wed Jun 28 10:45:17 2006 -0500
6271 * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
6273 Signed-off-by: Andy Fleming <afleming@freescale.com>
6275 commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
6276 Author: Matthew McClintock <msm@freescale.com>
6277 Date: Wed Jun 28 10:44:49 2006 -0500
6279 * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
6281 Signed-off-by: Andy Fleming <afleming@freescale.com>
6283 commit a4e11558b810ef2cddffdf7b9d86bc1130441960
6284 Author: Matthew McClintock <msm@freescale.com>
6285 Date: Wed Jun 28 10:44:23 2006 -0500
6287 * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
6289 Signed-off-by: Andy Fleming <afleming@freescale.com>
6291 commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
6292 Author: Matthew McClintock <msm@freescale.com>
6293 Date: Wed Jun 28 10:43:36 2006 -0500
6295 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
6297 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6299 commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
6300 Author: Matthew McClintock <msm@freescale.com>
6301 Date: Wed Jun 28 10:43:00 2006 -0500
6303 * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
6305 commit 5498d90312aad9f6bdbf047986027c35b03cd163
6306 Author: Matthew McClintock <msm@freescale.com>
6307 Date: Wed Jun 28 10:42:24 2006 -0500
6309 * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
6311 commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
6312 Author: Matthew McClintock <msm@freescale.com>
6313 Date: Wed Jun 28 10:41:37 2006 -0500
6315 * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
6317 commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
6318 Author: John Traill <john.traill@freescale.com>
6319 Date: Wed Aug 9 14:33:50 2006 +0100
6321 Add Rapidio support for the MPC8641HPCN
6323 Signed-off-by: John Traill <john.traill@freescale.com>
6325 commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
6326 Author: John Traill <john.traill@freescale.com>
6327 Date: Tue Aug 8 11:32:43 2006 +0100
6329 Fix caslat calculation
6331 Signed-off-by: John Traill <john.traill@freescale.com>
6333 commit 709d3073e74153278e7904a70819bbef7df50e1a
6334 Author: Jon Loeliger <jdl@freescale.com>
6335 Date: Thu Aug 3 16:17:56 2006 -0500
6337 Convert to mac-address in ethernet nodes.
6339 commit 71748af833ca1017edf1415be376366ff2937d17
6340 Author: Haiying Wang <haiying.wang@freescale.com>
6341 Date: Fri Jul 28 12:41:35 2006 -0400
6343 Correct the irq value of DUART2
6345 commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
6346 Author: Haiying Wang <haiying.wang@freescale.com>
6347 Date: Fri Jul 28 12:41:41 2006 -0400
6349 Change the space size of PEX IO in README
6351 commit 239db37c94f7a92941c4465feceb867c609241c5
6352 Author: Haiying Wang <haiying.wang@freescale.com>
6353 Date: Fri Jul 28 12:41:18 2006 -0400
6355 Move get_board_sys_clk to board directory
6357 commit 492900b985439fbce1a118afde1e35def870db03
6358 Author: John Traill <john.traill@freescale.com>
6359 Date: Fri Jul 28 09:03:54 2006 +0100
6361 Fix 8641HPCN pollution
6363 commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
6364 Author: John Traill <john.traill@freescale.com>
6365 Date: Fri Jul 28 08:16:06 2006 +0100
6367 Fix 8641HPCN timebase
6369 commit c86360b830f1eecd7a72208575dde4f57879faea
6370 Author: Zhang Wei <wei.zhang@freescale.com>
6371 Date: Fri Jul 28 00:01:34 2006 +0800
6373 Fixed OF device tree of mpc86xxhpcn board.
6375 The changes works in with kernel irq mapping rework.
6377 Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
6379 commit bea3f28d285942bf3f7ab339ce85178ded544225
6380 Author: Haiying Wang <haiying.wang@freescale.com>
6381 Date: Wed Jul 12 10:48:05 2006 -0400
6383 Add support for reading and writing mac addresses to or from ID EEPROM.
6385 Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
6386 With attached patch, we can use command "mac/mac read/mac save/"
6387 to read and write EEPROM under u-boot prompt.
6389 U-boot will calculate the checksum of EEPROM while bootup,
6390 if it is right, then u-boot will check whether the mac address
6391 of eTSEC0/1/2/3 is availalbe (non-zero).
6393 If there is mac address availabe in EEPROM, u-boot will use it,
6394 otherewise, u-boot will use the mac address defined in
6395 MPC8641HPCN.h. This matches the requirement to set unique mac address
6398 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
6399 Signed-off-by: York Sun <yorksun@freescale.com>
6401 commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
6402 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
6403 Date: Thu Jul 13 10:35:10 2006 -0500
6405 Fixed initrd issue by define big RAM
6407 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
6409 commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
6410 Author: Jason Jin <Jason.jin@freescale.com>
6411 Date: Fri Jul 7 10:01:45 2006 -0500
6413 We made a u-boot patch to fix the hang up issue
6414 when booting filesystem from ramdisk.
6416 Signed-off-by:Jason Jin <Jason.jin@freescale.com>
6418 commit 38433ccc5850ee70549af0b2bc5b920355ef5388
6419 Author: Matthew McClintock <msm@freescale.com>
6420 Date: Wed Jun 28 10:47:03 2006 -0500
6422 * Switched default PCI speed for 8540 ADS back to 33MHz
6423 * Added comments and a printf to warn that PCI-X won't
6425 Patch by Andy Fleming 17-Mar-2006
6427 Signed-off-by: Andy Fleming <afleming@freescale.com>
6429 commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
6430 Author: Matthew McClintock <msm@freescale.com>
6431 Date: Wed Jun 28 10:46:35 2006 -0500
6433 * Fixed a bug where 8555 PCI code used the old variable and
6435 Patch by Andy Fleming 17-Mar-2006
6437 Signed-off-by: Andy Fleming <afleming@freescale.com>
6439 commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
6440 Author: Matthew McClintock <msm@freescale.com>
6441 Date: Wed Jun 28 10:46:13 2006 -0500
6443 * Added VIA configuration table
6444 * Added support for PCI2 on CDS
6445 Patch by Andy Fleming 17-Mar-2006
6447 Signed-off-by: Andy Fleming <afleming@freescale.com>
6449 commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
6450 Author: Matthew McClintock <msm@freescale.com>
6451 Date: Wed Jun 28 10:45:41 2006 -0500
6453 * Fixed PCI memory definitions
6454 Patch by Andy Fleming 17-Mar-2006
6456 Signed-off-by: Andy Fleming <afleming@freescale.com>
6458 commit 087454609e47295443af793a282cddcd91a5f49c
6459 Author: Matthew McClintock <msm@freescale.com>
6460 Date: Wed Jun 28 10:45:17 2006 -0500
6462 * Added support for initializing second PCI bus on 85xx
6463 Patch by Andy Fleming 17-Mar-2006
6465 Signed-off-by: Andy Fleming <afleming@freescale.com>
6467 commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
6468 Author: Matthew McClintock <msm@freescale.com>
6469 Date: Wed Jun 28 10:44:49 2006 -0500
6471 * Added PCI-X #defines for PCI-X initialization
6472 Patch by Andy Fleming on 17-Mar-2006
6474 Signed-off-by: Andy Fleming <afleming@freescale.com>
6476 commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
6477 Author: Matthew McClintock <msm@freescale.com>
6478 Date: Wed Jun 28 10:44:23 2006 -0500
6480 * Made sure the code which disables prefetch for PCI devices
6481 sets the size of the prefetch region to 0
6482 Patch by Andy Fleming on 17-Mar-2006
6484 Signed-off-by: Andy Fleming <afleming@freescale.com>
6486 commit 40d5fa35d02df22580593bf0039ab173367e8ef0
6487 Author: Matthew McClintock <msm@freescale.com>
6488 Date: Wed Jun 28 10:43:36 2006 -0500
6490 * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
6491 Patch by Jon Loeliger 17-Jan-2006
6493 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6495 commit be7e8b0cb5a0c49dc180075b96df296a893bf146
6496 Author: Matthew McClintock <msm@freescale.com>
6497 Date: Wed Jun 28 10:43:00 2006 -0500
6499 * Removed the oftree.dts for stxxtx in light of the changes
6500 to the flat device tree handling code
6501 Patch by Matthew McClintock 26-June-2006
6503 commit 1b380ec225665e73959677f3893dc658c5925e05
6504 Author: Matthew McClintock <msm@freescale.com>
6505 Date: Wed Jun 28 10:42:24 2006 -0500
6507 * Patch to modify ft_build.c to update flat device trees in place
6508 Patch by Matthew McClintock 26-June-2006
6510 commit 98a9c4d468a942a09ebe8979bec508017f3e4462
6511 Author: Matthew McClintock <msm@freescale.com>
6512 Date: Wed Jun 28 10:41:37 2006 -0500
6514 * Modify bootm command to support booting with flat device trees
6515 Patch by Matthew McClintock 26-June-2006
6517 commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
6518 Author: Jin Zhengxiong <Jason.Jin@freescale.com>
6519 Date: Wed Jun 28 08:43:56 2006 -0500
6521 Change Id to symbolic name for RTL8139
6523 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
6525 commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
6526 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
6527 Date: Tue Jun 27 18:12:10 2006 +0800
6529 Fix RTL8139 in big endian
6531 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
6532 signed-off-by: Wei Zhang <wei.zhang@freescale.com>
6534 commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
6535 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
6536 Date: Tue Jun 27 18:12:23 2006 +0800
6538 Fix Tsec bug when no link
6540 When tftp a non-exist file from the tftp server, u-boot will check
6541 the link of all eth port. The original file will return wrong link
6542 state on the no link ports.
6544 signed-off-by: Jason Jin <Jason.Jin@freescale.com>
6546 commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
6547 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
6548 Date: Tue Jun 27 18:12:02 2006 +0800
6550 Fix bug for io_bar size during pci scan
6552 During the pci scan process, Some devices return bar_reponse with the
6553 highest bytes 0, such as the pci bridge in uli1575 return bar_response
6554 with 0xffffff, So the bar_size should be manually set under 64K.
6556 Signed-off-by: Jason Jin <jason.jin@freescale.com>
6558 commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
6559 Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
6560 Date: Tue Jun 27 18:11:54 2006 +0800
6562 Enable PCIE1 for MPC8641HPCN board
6564 Signed-off-by: Jason Jin <Jason.jin@freescale.com>
6566 commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
6567 Author: Jon Loeliger <jdl@freescale.com>
6568 Date: Thu Jun 22 08:51:46 2006 -0500
6570 Fix bug in 8641hpcn reset command with no args.
6572 Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
6573 Acked-by: Jon Loeliger <jdl@freescale.com>
6575 commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
6576 Author: Zhang Wei <wei.zhang@freescale.com>
6577 Date: Tue Jun 20 17:47:15 2006 +0800
6579 Reworked IRQ mapping in OF-tree.
6581 commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
6582 Author: Jon Loeliger <jdl@freescale.com>
6583 Date: Thu Jun 15 21:33:37 2006 -0500
6585 Do not enable address translation on secondary CPUs.
6586 Do not set up BATs on secondary CPUs. Let Linux do the nasty.
6588 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6590 commit 8ecc971618f56029ad99d3516f8b297a6ed58971
6591 Author: Jon Loeliger <jdl@jdl.com>
6592 Date: Wed Jun 7 10:53:55 2006 -0500
6594 Fix a get_board_sys_clk() use-before-def warning.
6596 Signed-off-by: Jon Loeliger <jdl@jdl.com>
6598 commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
6599 Author: Jon Loeliger <jdl@jdl.com>
6600 Date: Wed Jun 7 10:52:49 2006 -0500
6602 Allow DTC path to be passed in.
6604 Signed-off-by: Jon Loeliger <jdl@jdl.com>
6606 commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
6607 Author: Haiying Wang <haiying.wang@freescale.com>
6608 Date: Tue Jun 6 16:54:29 2006 -0400
6610 Modify the IRQ of DUART2
6612 commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
6613 Author: Jon Loeliger <jdl@jdl.com>
6614 Date: Wed May 31 13:55:35 2006 -0500
6618 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6620 commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
6621 Author: Jon Loeliger <jdl@jdl.com>
6622 Date: Wed May 31 12:44:44 2006 -0500
6624 White space cleanup.
6625 Some 80-column cleanups.
6626 Convert printf() to puts() where possible.
6627 Use #include "spd_sdram.h" as needed.
6628 Enhanced reset command usage message a bit.
6630 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6632 commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
6633 Author: Jon Loeliger <jdl@jdl.com>
6634 Date: Wed May 31 11:39:34 2006 -0500
6636 Removed unneeded local_bus_init() from 8641HPCN board.
6638 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6640 commit 4d3d729c16c392d2982d3266b659d333c927697d
6641 Author: Jon Loeliger <jdl@jdl.com>
6642 Date: Wed May 31 11:24:28 2006 -0500
6644 Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
6646 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6648 commit b2a941de060350ad15878d8219825f4950e9bb8e
6649 Author: Jon Loeliger <jdl@jdl.com>
6650 Date: Wed May 31 10:07:28 2006 -0500
6652 Remove dead debug code.
6654 Signed-off-by: Jon Loeliger <jdl@jdl.com>
6656 commit 126aa70f10ba3d20e0a6f4d32328250513b77770
6657 Author: Jon Loeliger <jdl@freescale.com>
6658 Date: Tue May 30 17:47:00 2006 -0500
6660 Move mpc86xx PIXIS code to board directory
6662 First cut at moving the PIXIS platform code out of
6663 the 86xx cpu directory and into board/mpc8641hpcn
6666 Signed-off-by: Jon Loeliger <jdl@freescale.com>
6668 commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
6669 Author: Haiying Wang <Haiying.Wang@freescale.com>
6670 Date: Tue May 30 09:10:32 2006 -0500
6672 Improve "reset" command's interaction with watchdog.
6674 "reset altbank" will reset another bank WITHOUT watch dog timer enabled
6675 "reset altbank wd" will reset another bank WITH watch dog enabled
6676 "diswd" will disable watch dog after u-boot boots up successfully
6678 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
6680 commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
6681 Author: Haiying Wang <Haiying.Wang@freescale.com>
6682 Date: Tue May 30 08:51:19 2006 -0500
6684 Fix two SDRAM setup bugs.
6687 Enable 1T/2T based on number of DIMMs present.
6689 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
6691 commit d11fec5015334deb2010e36ce00bb118cc5429a5
6692 Author: Haiying Wang <Haiying.Wang@freescale.com>
6693 Date: Fri May 26 10:24:48 2006 -0500
6695 Add first draft of the MPC8641HPCN doc/README.
6697 Signed-off-by: Jon Loeliger <jdl@jdl.com>
6699 commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
6700 Author: Haiying Wang <Haiying.Wang@freescale.com>
6701 Date: Fri May 26 10:13:04 2006 -0500
6703 Added pci@8000 block.
6704 Updated ethernet interrupt mappings (moved up 48).
6705 Cleaned up a few comments.
6707 Signed-off-by: Jon Loeliger <jdl@jdl.com>
6709 commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
6710 Author: Haiying Wang <Haiying.Wang@freescale.com>
6711 Date: Fri May 26 10:01:16 2006 -0500
6713 Allow args on reset command.
6715 Signed-off-by: Jon Loeliger <jdl@jdl.com>
6717 commit 14e37081ff3cac7ebe6e93836523429853b6b292
6718 Author: Jon Loeliger <jdl@jdl.com>
6719 Date: Fri May 19 13:28:39 2006 -0500
6721 Change arbitration to round-robin for SMP linux.
6723 commit 9a655876e5995be80f49054e2509500e871e4d3a
6724 Author: Jon Loeliger <jdl@jdl.com>
6725 Date: Fri May 19 13:26:34 2006 -0500
6727 Enable dual DDR controllers and interleaving.
6729 commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
6730 Author: Jon Loeliger <jdl@jdl.com>
6731 Date: Fri May 19 13:22:44 2006 -0500
6733 Update 86xx address map and LAWBARs.
6735 commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
6736 Author: Jon Loeliger <jdl@jdl.com>
6737 Date: Fri May 19 13:14:15 2006 -0500
6739 Remove L2 Cache invalidate polling.
6741 commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
6742 Author: Jon Loeliger <jdl@jdl.com>
6743 Date: Fri May 19 12:33:09 2006 -0500
6745 Enable 2nd CPU and I2C.
6747 commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
6748 Author: Jon Loeliger <jdl@freescale.com>
6749 Date: Mon May 15 07:26:56 2006 -0500
6751 Update interrupt mapping.
6753 commit 6cfea33477b04b63ed47386ed1629529484c33ba
6754 Author: Haiying Wang <Haiying.Wang@freescale.com>
6755 Date: Wed May 10 09:38:06 2006 -0500
6757 Remove unneeded INIT_RAM_LOCK cache twiddling.
6758 Correctly tracks r29 as global data pointer now.
6760 Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
6762 commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
6763 Author: Jon Loeliger <jdl@freescale.com>
6764 Date: Wed May 10 09:33:07 2006 -0500
6766 Remove unnecessary flash.c file.
6768 commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
6769 Author: Jon Loeliger <jdl@freescale.com>
6770 Date: Tue May 9 08:23:49 2006 -0500
6772 Get MPC8641HPCN flash images working.
6774 Enable the CFI driver.
6775 Remove bogus LAWBAR7 cruft.
6776 Use correct TEXT_BASE, Fixup load script.
6777 Enable SPD EEPROM during DDR setup.
6778 Use generic RFC 1918 IP addresses by default.
6780 commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
6781 Author: Jon Loeliger <jdl@freescale.com>
6782 Date: Thu Apr 27 10:15:16 2006 -0500
6784 Cleanup whitespaces and style issues.
6785 Removed //-style comments.
6786 Use 80-column lines.
6787 Remove trailing whitespace.
6788 Remove dead code and debug cruft.
6790 commit a2320a6bf8113a09544c42d160d10ac69d049a03
6791 Author: Jon Loeliger <jdl@freescale.com>
6792 Date: Thu Apr 27 08:22:39 2006 -0500
6794 Revert bad PCI prefetch limit change.
6796 commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
6797 Author: Jon Loeliger <jdl@freescale.com>
6798 Date: Wed Apr 26 17:58:56 2006 -0500
6800 Initial support for MPC8641 HPCN board.