Marvell MV88F6281GTW_GE Board support

[u-boot-kw.git] / common / usb.c

/*
 *
 * Most of this source has been derived from the Linux USB
 * project:
 * (C) Copyright Linus Torvalds 1999
 * (C) Copyright Johannes Erdfelt 1999-2001
 * (C) Copyright Andreas Gal 1999
 * (C) Copyright Gregory P. Smith 1999
 * (C) Copyright Deti Fliegl 1999 (new USB architecture)
 * (C) Copyright Randy Dunlap 2000
 * (C) Copyright David Brownell 2000 (kernel hotplug, usb_device_id)
 * (C) Copyright Yggdrasil Computing, Inc. 2000
 *     (usb_device_id matching changes by Adam J. Richter)
 *
 * Adapted for U-Boot:
 * (C) Copyright 2001 Denis Peter, MPL AG Switzerland
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 *
 */

/*
 * How it works:
 *
 * Since this is a bootloader, the devices will not be automatic
 * (re)configured on hotplug, but after a restart of the USB the
 * device should work.
 *
 * For each transfer (except "Interrupt") we wait for completion.
 */
#include <common.h>
#include <command.h>
#include <asm/processor.h>
#include <linux/ctype.h>
#include <asm/byteorder.h>

#include <usb.h>
#ifdef CONFIG_4xx
#include <asm/4xx_pci.h>
#endif

#undef USB_DEBUG

#ifdef  USB_DEBUG
#define USB_PRINTF(fmt, args...)        printf(fmt , ##args)
#else
#define USB_PRINTF(fmt, args...)
#endif

#define USB_BUFSIZ      512

static struct usb_device usb_dev[USB_MAX_DEVICE];
static int dev_index;
static int running;
static int asynch_allowed;
static struct devrequest setup_packet;

char usb_started; /* flag for the started/stopped USB status */

/**********************************************************************
 * some forward declerations...
 */
void usb_scan_devices(void);

int usb_hub_probe(struct usb_device *dev, int ifnum);
void usb_hub_reset(void);
static int hub_port_reset(struct usb_device *dev, int port,
                          unsigned short *portstat);

/***********************************************************************
 * wait_ms
 */

inline void wait_ms(unsigned long ms)
{
        while (ms-- > 0)
                udelay(1000);
}

/***************************************************************************
 * Init USB Device
 */

int usb_init(void)
{
        int result;

        running = 0;
        dev_index = 0;
        asynch_allowed = 1;
        usb_hub_reset();
        /* init low_level USB */
        printf("USB:   ");
        result = usb_lowlevel_init();
        /* if lowlevel init is OK, scan the bus for devices
         * i.e. search HUBs and configure them */
        if (result == 0) {
                printf("scanning bus for devices... ");
                running = 1;
                usb_scan_devices();
                usb_started = 1;
                return 0;
        } else {
                printf("Error, couldn't init Lowlevel part\n");
                usb_started = 0;
                return -1;
        }
}

/******************************************************************************
 * Stop USB this stops the LowLevel Part and deregisters USB devices.
 */
int usb_stop(void)
{
        int res = 0;

        if (usb_started) {
                asynch_allowed = 1;
                usb_started = 0;
                usb_hub_reset();
                res = usb_lowlevel_stop();
        }
        return res;
}

/*
 * disables the asynch behaviour of the control message. This is used for data
 * transfers that uses the exclusiv access to the control and bulk messages.
 */
void usb_disable_asynch(int disable)
{
        asynch_allowed = !disable;
}


/*-------------------------------------------------------------------
 * Message wrappers.
 *
 */

/*
 * submits an Interrupt Message
 */
int usb_submit_int_msg(struct usb_device *dev, unsigned long pipe,
                        void *buffer, int transfer_len, int interval)
{
        return submit_int_msg(dev, pipe, buffer, transfer_len, interval);
}

/*
 * submits a control message and waits for comletion (at least timeout * 1ms)
 * If timeout is 0, we don't wait for completion (used as example to set and
 * clear keyboards LEDs). For data transfers, (storage transfers) we don't
 * allow control messages with 0 timeout, by previousely resetting the flag
 * asynch_allowed (usb_disable_asynch(1)).
 * returns the transfered length if OK or -1 if error. The transfered length
 * and the current status are stored in the dev->act_len and dev->status.
 */
int usb_control_msg(struct usb_device *dev, unsigned int pipe,
                        unsigned char request, unsigned char requesttype,
                        unsigned short value, unsigned short index,
                        void *data, unsigned short size, int timeout)
{
        if ((timeout == 0) && (!asynch_allowed)) {
                /* request for a asynch control pipe is not allowed */
                return -1;
        }

        /* set setup command */
        setup_packet.requesttype = requesttype;
        setup_packet.request = request;
        setup_packet.value = cpu_to_le16(value);
        setup_packet.index = cpu_to_le16(index);
        setup_packet.length = cpu_to_le16(size);
        USB_PRINTF("usb_control_msg: request: 0x%X, requesttype: 0x%X, " \
                   "value 0x%X index 0x%X length 0x%X\n",
                   request, requesttype, value, index, size);
        dev->status = USB_ST_NOT_PROC; /*not yet processed */

        submit_control_msg(dev, pipe, data, size, &setup_packet);
        if (timeout == 0)
                return (int)size;

        if (dev->status != 0) {
                /*
                 * Let's wait a while for the timeout to elapse.
                 * It has no real use, but it keeps the interface happy.
                 */
                wait_ms(timeout);
                return -1;
        }

        return dev->act_len;
}

/*-------------------------------------------------------------------
 * submits bulk message, and waits for completion. returns 0 if Ok or
 * -1 if Error.
 * synchronous behavior
 */
int usb_bulk_msg(struct usb_device *dev, unsigned int pipe,
                        void *data, int len, int *actual_length, int timeout)
{
        if (len < 0)
                return -1;
        dev->status = USB_ST_NOT_PROC; /*not yet processed */
        submit_bulk_msg(dev, pipe, data, len);
        while (timeout--) {
                if (!((volatile unsigned long)dev->status & USB_ST_NOT_PROC))
                        break;
                wait_ms(1);
        }
        *actual_length = dev->act_len;
        if (dev->status == 0)
                return 0;
        else
                return -1;
}


/*-------------------------------------------------------------------
 * Max Packet stuff
 */

/*
 * returns the max packet size, depending on the pipe direction and
 * the configurations values
 */
int usb_maxpacket(struct usb_device *dev, unsigned long pipe)
{
        /* direction is out -> use emaxpacket out */
        if ((pipe & USB_DIR_IN) == 0)
                return dev->epmaxpacketout[((pipe>>15) & 0xf)];
        else
                return dev->epmaxpacketin[((pipe>>15) & 0xf)];
}

/* The routine usb_set_maxpacket_ep() is extracted from the loop of routine
 * usb_set_maxpacket(), because the optimizer of GCC 4.x chokes on this routine
 * when it is inlined in 1 single routine. What happens is that the register r3
 * is used as loop-count 'i', but gets overwritten later on.
 * This is clearly a compiler bug, but it is easier to workaround it here than
 * to update the compiler (Occurs with at least several GCC 4.{1,2},x
 * CodeSourcery compilers like e.g. 2007q3, 2008q1, 2008q3 lite editions on ARM)
 */
static void  __attribute__((noinline))
usb_set_maxpacket_ep(struct usb_device *dev, struct usb_endpoint_descriptor *ep)
{
        int b;

        b = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;

        if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
                                                USB_ENDPOINT_XFER_CONTROL) {
                /* Control => bidirectional */
                dev->epmaxpacketout[b] = ep->wMaxPacketSize;
                dev->epmaxpacketin[b] = ep->wMaxPacketSize;
                USB_PRINTF("##Control EP epmaxpacketout/in[%d] = %d\n",
                           b, dev->epmaxpacketin[b]);
        } else {
                if ((ep->bEndpointAddress & 0x80) == 0) {
                        /* OUT Endpoint */
                        if (ep->wMaxPacketSize > dev->epmaxpacketout[b]) {
                                dev->epmaxpacketout[b] = ep->wMaxPacketSize;
                                USB_PRINTF("##EP epmaxpacketout[%d] = %d\n",
                                           b, dev->epmaxpacketout[b]);
                        }
                } else {
                        /* IN Endpoint */
                        if (ep->wMaxPacketSize > dev->epmaxpacketin[b]) {
                                dev->epmaxpacketin[b] = ep->wMaxPacketSize;
                                USB_PRINTF("##EP epmaxpacketin[%d] = %d\n",
                                           b, dev->epmaxpacketin[b]);
                        }
                } /* if out */
        } /* if control */
}

/*
 * set the max packed value of all endpoints in the given configuration
 */
int usb_set_maxpacket(struct usb_device *dev)
{
        int i, ii;

        for (i = 0; i < dev->config.bNumInterfaces; i++)
                for (ii = 0; ii < dev->config.if_desc[i].bNumEndpoints; ii++)
                        usb_set_maxpacket_ep(dev,
                                          &dev->config.if_desc[i].ep_desc[ii]);

        return 0;
}

/*******************************************************************************
 * Parse the config, located in buffer, and fills the dev->config structure.
 * Note that all little/big endian swapping are done automatically.
 */
int usb_parse_config(struct usb_device *dev, unsigned char *buffer, int cfgno)
{
        struct usb_descriptor_header *head;
        int index, ifno, epno, curr_if_num;
        int i;
        unsigned char *ch;

        ifno = -1;
        epno = -1;
        curr_if_num = -1;

        dev->configno = cfgno;
        head = (struct usb_descriptor_header *) &buffer[0];
        if (head->bDescriptorType != USB_DT_CONFIG) {
                printf(" ERROR: NOT USB_CONFIG_DESC %x\n",
                        head->bDescriptorType);
                return -1;
        }
        memcpy(&dev->config, buffer, buffer[0]);
        le16_to_cpus(&(dev->config.wTotalLength));
        dev->config.no_of_if = 0;

        index = dev->config.bLength;
        /* Ok the first entry must be a configuration entry,
         * now process the others */
        head = (struct usb_descriptor_header *) &buffer[index];
        while (index + 1 < dev->config.wTotalLength) {
                switch (head->bDescriptorType) {
                case USB_DT_INTERFACE:
                        if (((struct usb_interface_descriptor *) \
                             &buffer[index])->bInterfaceNumber != curr_if_num) {
                                /* this is a new interface, copy new desc */
                                ifno = dev->config.no_of_if;
                                dev->config.no_of_if++;
                                memcpy(&dev->config.if_desc[ifno],
                                        &buffer[index], buffer[index]);
                                dev->config.if_desc[ifno].no_of_ep = 0;
                                dev->config.if_desc[ifno].num_altsetting = 1;
                                curr_if_num =
                                     dev->config.if_desc[ifno].bInterfaceNumber;
                        } else {
                                /* found alternate setting for the interface */
                                dev->config.if_desc[ifno].num_altsetting++;
                        }
                        break;
                case USB_DT_ENDPOINT:
                        epno = dev->config.if_desc[ifno].no_of_ep;
                        /* found an endpoint */
                        dev->config.if_desc[ifno].no_of_ep++;
                        memcpy(&dev->config.if_desc[ifno].ep_desc[epno],
                                &buffer[index], buffer[index]);
                        le16_to_cpus(&(dev->config.if_desc[ifno].ep_desc[epno].\
                                                               wMaxPacketSize));
                        USB_PRINTF("if %d, ep %d\n", ifno, epno);
                        break;
                default:
                        if (head->bLength == 0)
                                return 1;

                        USB_PRINTF("unknown Description Type : %x\n",
                                   head->bDescriptorType);

                        {
                                ch = (unsigned char *)head;
                                for (i = 0; i < head->bLength; i++)
                                        USB_PRINTF("%02X ", *ch++);
                                USB_PRINTF("\n\n\n");
                        }
                        break;
                }
                index += head->bLength;
                head = (struct usb_descriptor_header *)&buffer[index];
        }
        return 1;
}

/***********************************************************************
 * Clears an endpoint
 * endp: endpoint number in bits 0-3;
 * direction flag in bit 7 (1 = IN, 0 = OUT)
 */
int usb_clear_halt(struct usb_device *dev, int pipe)
{
        int result;
        int endp = usb_pipeendpoint(pipe)|(usb_pipein(pipe)<<7);

        result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                                 USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT, 0,
                                 endp, NULL, 0, USB_CNTL_TIMEOUT * 3);

        /* don't clear if failed */
        if (result < 0)
                return result;

        /*
         * NOTE: we do not get status and verify reset was successful
         * as some devices are reported to lock up upon this check..
         */

        usb_endpoint_running(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));

        /* toggle is reset on clear */
        usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0);
        return 0;
}


/**********************************************************************
 * get_descriptor type
 */
int usb_get_descriptor(struct usb_device *dev, unsigned char type,
                        unsigned char index, void *buf, int size)
{
        int res;
        res = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
                        USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
                        (type << 8) + index, 0,
                        buf, size, USB_CNTL_TIMEOUT);
        return res;
}

/**********************************************************************
 * gets configuration cfgno and store it in the buffer
 */
int usb_get_configuration_no(struct usb_device *dev,
                             unsigned char *buffer, int cfgno)
{
        int result;
        unsigned int tmp;
        struct usb_config_descriptor *config;


        config = (struct usb_config_descriptor *)&buffer[0];
        result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, 9);
        if (result < 9) {
                if (result < 0)
                        printf("unable to get descriptor, error %lX\n",
                                dev->status);
                else
                        printf("config descriptor too short " \
                                "(expected %i, got %i)\n", 9, result);
                return -1;
        }
        tmp = le16_to_cpu(config->wTotalLength);

        if (tmp > USB_BUFSIZ) {
                USB_PRINTF("usb_get_configuration_no: failed to get " \
                           "descriptor - too long: %d\n", tmp);
                return -1;
        }

        result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, tmp);
        USB_PRINTF("get_conf_no %d Result %d, wLength %d\n",
                   cfgno, result, tmp);
        return result;
}

/********************************************************************
 * set address of a device to the value in dev->devnum.
 * This can only be done by addressing the device via the default address (0)
 */
int usb_set_address(struct usb_device *dev)
{
        int res;

        USB_PRINTF("set address %d\n", dev->devnum);
        res = usb_control_msg(dev, usb_snddefctrl(dev),
                                USB_REQ_SET_ADDRESS, 0,
                                (dev->devnum), 0,
                                NULL, 0, USB_CNTL_TIMEOUT);
        return res;
}

/********************************************************************
 * set interface number to interface
 */
int usb_set_interface(struct usb_device *dev, int interface, int alternate)
{
        struct usb_interface_descriptor *if_face = NULL;
        int ret, i;

        for (i = 0; i < dev->config.bNumInterfaces; i++) {
                if (dev->config.if_desc[i].bInterfaceNumber == interface) {
                        if_face = &dev->config.if_desc[i];
                        break;
                }
        }
        if (!if_face) {
                printf("selecting invalid interface %d", interface);
                return -1;
        }
        /*
         * We should return now for devices with only one alternate setting.
         * According to 9.4.10 of the Universal Serial Bus Specification
         * Revision 2.0 such devices can return with a STALL. This results in
         * some USB sticks timeouting during initialization and then being
         * unusable in U-Boot.
         */
        if (if_face->num_altsetting == 1)
                return 0;

        ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                                USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE,
                                alternate, interface, NULL, 0,
                                USB_CNTL_TIMEOUT * 5);
        if (ret < 0)
                return ret;

        return 0;
}

/********************************************************************
 * set configuration number to configuration
 */
int usb_set_configuration(struct usb_device *dev, int configuration)
{
        int res;
        USB_PRINTF("set configuration %d\n", configuration);
        /* set setup command */
        res = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                                USB_REQ_SET_CONFIGURATION, 0,
                                configuration, 0,
                                NULL, 0, USB_CNTL_TIMEOUT);
        if (res == 0) {
                dev->toggle[0] = 0;
                dev->toggle[1] = 0;
                return 0;
        } else
                return -1;
}

/********************************************************************
 * set protocol to protocol
 */
int usb_set_protocol(struct usb_device *dev, int ifnum, int protocol)
{
        return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                USB_REQ_SET_PROTOCOL, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
                protocol, ifnum, NULL, 0, USB_CNTL_TIMEOUT);
}

/********************************************************************
 * set idle
 */
int usb_set_idle(struct usb_device *dev, int ifnum, int duration, int report_id)
{
        return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                USB_REQ_SET_IDLE, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
                (duration << 8) | report_id, ifnum, NULL, 0, USB_CNTL_TIMEOUT);
}

/********************************************************************
 * get report
 */
int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type,
                   unsigned char id, void *buf, int size)
{
        return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
                        USB_REQ_GET_REPORT,
                        USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
                        (type << 8) + id, ifnum, buf, size, USB_CNTL_TIMEOUT);
}

/********************************************************************
 * get class descriptor
 */
int usb_get_class_descriptor(struct usb_device *dev, int ifnum,
                unsigned char type, unsigned char id, void *buf, int size)
{
        return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
                USB_REQ_GET_DESCRIPTOR, USB_RECIP_INTERFACE | USB_DIR_IN,
                (type << 8) + id, ifnum, buf, size, USB_CNTL_TIMEOUT);
}

/********************************************************************
 * get string index in buffer
 */
int usb_get_string(struct usb_device *dev, unsigned short langid,
                   unsigned char index, void *buf, int size)
{
        int i;
        int result;

        for (i = 0; i < 3; ++i) {
                /* some devices are flaky */
                result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
                        USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
                        (USB_DT_STRING << 8) + index, langid, buf, size,
                        USB_CNTL_TIMEOUT);

                if (result > 0)
                        break;
        }

        return result;
}


static void usb_try_string_workarounds(unsigned char *buf, int *length)
{
        int newlength, oldlength = *length;

        for (newlength = 2; newlength + 1 < oldlength; newlength += 2)
                if (!isprint(buf[newlength]) || buf[newlength + 1])
                        break;

        if (newlength > 2) {
                buf[0] = newlength;
                *length = newlength;
        }
}


static int usb_string_sub(struct usb_device *dev, unsigned int langid,
                unsigned int index, unsigned char *buf)
{
        int rc;

        /* Try to read the string descriptor by asking for the maximum
         * possible number of bytes */
        rc = usb_get_string(dev, langid, index, buf, 255);

        /* If that failed try to read the descriptor length, then
         * ask for just that many bytes */
        if (rc < 2) {
                rc = usb_get_string(dev, langid, index, buf, 2);
                if (rc == 2)
                        rc = usb_get_string(dev, langid, index, buf, buf[0]);
        }

        if (rc >= 2) {
                if (!buf[0] && !buf[1])
                        usb_try_string_workarounds(buf, &rc);

                /* There might be extra junk at the end of the descriptor */
                if (buf[0] < rc)
                        rc = buf[0];

                rc = rc - (rc & 1); /* force a multiple of two */
        }

        if (rc < 2)
                rc = -1;

        return rc;
}


/********************************************************************
 * usb_string:
 * Get string index and translate it to ascii.
 * returns string length (> 0) or error (< 0)
 */
int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
{
        unsigned char mybuf[USB_BUFSIZ];
        unsigned char *tbuf;
        int err;
        unsigned int u, idx;

        if (size <= 0 || !buf || !index)
                return -1;
        buf[0] = 0;
        tbuf = &mybuf[0];

        /* get langid for strings if it's not yet known */
        if (!dev->have_langid) {
                err = usb_string_sub(dev, 0, 0, tbuf);
                if (err < 0) {
                        USB_PRINTF("error getting string descriptor 0 " \
                                   "(error=%lx)\n", dev->status);
                        return -1;
                } else if (tbuf[0] < 4) {
                        USB_PRINTF("string descriptor 0 too short\n");
                        return -1;
                } else {
                        dev->have_langid = -1;
                        dev->string_langid = tbuf[2] | (tbuf[3] << 8);
                                /* always use the first langid listed */
                        USB_PRINTF("USB device number %d default " \
                                   "language ID 0x%x\n",
                                   dev->devnum, dev->string_langid);
                }
        }

        err = usb_string_sub(dev, dev->string_langid, index, tbuf);
        if (err < 0)
                return err;

        size--;         /* leave room for trailing NULL char in output buffer */
        for (idx = 0, u = 2; u < err; u += 2) {
                if (idx >= size)
                        break;
                if (tbuf[u+1])                  /* high byte */
                        buf[idx++] = '?';  /* non-ASCII character */
                else
                        buf[idx++] = tbuf[u];
        }
        buf[idx] = 0;
        err = idx;
        return err;
}


/********************************************************************
 * USB device handling:
 * the USB device are static allocated [USB_MAX_DEVICE].
 */


/* returns a pointer to the device with the index [index].
 * if the device is not assigned (dev->devnum==-1) returns NULL
 */
struct usb_device *usb_get_dev_index(int index)
{
        if (usb_dev[index].devnum == -1)
                return NULL;
        else
                return &usb_dev[index];
}


/* returns a pointer of a new device structure or NULL, if
 * no device struct is available
 */
struct usb_device *usb_alloc_new_device(void)
{
        int i;
        USB_PRINTF("New Device %d\n", dev_index);
        if (dev_index == USB_MAX_DEVICE) {
                printf("ERROR, too many USB Devices, max=%d\n", USB_MAX_DEVICE);
                return NULL;
        }
        /* default Address is 0, real addresses start with 1 */
        usb_dev[dev_index].devnum = dev_index + 1;
        usb_dev[dev_index].maxchild = 0;
        for (i = 0; i < USB_MAXCHILDREN; i++)
                usb_dev[dev_index].children[i] = NULL;
        usb_dev[dev_index].parent = NULL;
        dev_index++;
        return &usb_dev[dev_index - 1];
}


/*
 * By the time we get here, the device has gotten a new device ID
 * and is in the default state. We need to identify the thing and
 * get the ball rolling..
 *
 * Returns 0 for success, != 0 for error.
 */
int usb_new_device(struct usb_device *dev)
{
        int addr, err;
        int tmp;
        unsigned char tmpbuf[USB_BUFSIZ];

        /* We still haven't set the Address yet */
        addr = dev->devnum;
        dev->devnum = 0;

#ifdef CONFIG_LEGACY_USB_INIT_SEQ
        /* this is the old and known way of initializing devices, it is
         * different than what Windows and Linux are doing. Windows and Linux
         * both retrieve 64 bytes while reading the device descriptor
         * Several USB stick devices report ERR: CTL_TIMEOUT, caused by an
         * invalid header while reading 8 bytes as device descriptor. */
        dev->descriptor.bMaxPacketSize0 = 8;        /* Start off at 8 bytes  */
        dev->maxpacketsize = PACKET_SIZE_8;
        dev->epmaxpacketin[0] = 8;
        dev->epmaxpacketout[0] = 8;

        err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &dev->descriptor, 8);
        if (err < 8) {
                printf("\n      USB device not responding, " \
                       "giving up (status=%lX)\n", dev->status);
                return 1;
        }
#else
        /* This is a Windows scheme of initialization sequence, with double
         * reset of the device (Linux uses the same sequence)
         * Some equipment is said to work only with such init sequence; this
         * patch is based on the work by Alan Stern:
         * http://sourceforge.net/mailarchive/forum.php?
         * thread_id=5729457&forum_id=5398
         */
        struct usb_device_descriptor *desc;
        int port = -1;
        struct usb_device *parent = dev->parent;
        unsigned short portstatus;

        /* send 64-byte GET-DEVICE-DESCRIPTOR request.  Since the descriptor is
         * only 18 bytes long, this will terminate with a short packet.  But if
         * the maxpacket size is 8 or 16 the device may be waiting to transmit
         * some more, or keeps on retransmitting the 8 byte header. */

        desc = (struct usb_device_descriptor *)tmpbuf;
        dev->descriptor.bMaxPacketSize0 = 64;       /* Start off at 64 bytes  */
        /* Default to 64 byte max packet size */
        dev->maxpacketsize = PACKET_SIZE_64;
        dev->epmaxpacketin[0] = 64;
        dev->epmaxpacketout[0] = 64;

        err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, 64);
        if (err < 0) {
                USB_PRINTF("usb_new_device: usb_get_descriptor() failed\n");
                return 1;
        }

        dev->descriptor.bMaxPacketSize0 = desc->bMaxPacketSize0;

        /* find the port number we're at */
        if (parent) {
                int j;

                for (j = 0; j < parent->maxchild; j++) {
                        if (parent->children[j] == dev) {
                                port = j;
                                break;
                        }
                }
                if (port < 0) {
                        printf("usb_new_device:cannot locate device's port.\n");
                        return 1;
                }

                /* reset the port for the second time */
                err = hub_port_reset(dev->parent, port, &portstatus);
                if (err < 0) {
                        printf("\n     Couldn't reset port %i\n", port);
                        return 1;
                }
        }
#endif

        dev->epmaxpacketin[0] = dev->descriptor.bMaxPacketSize0;
        dev->epmaxpacketout[0] = dev->descriptor.bMaxPacketSize0;
        switch (dev->descriptor.bMaxPacketSize0) {
        case 8:
                dev->maxpacketsize  = PACKET_SIZE_8;
                break;
        case 16:
                dev->maxpacketsize = PACKET_SIZE_16;
                break;
        case 32:
                dev->maxpacketsize = PACKET_SIZE_32;
                break;
        case 64:
                dev->maxpacketsize = PACKET_SIZE_64;
                break;
        }
        dev->devnum = addr;

        err = usb_set_address(dev); /* set address */

        if (err < 0) {
                printf("\n      USB device not accepting new address " \
                        "(error=%lX)\n", dev->status);
                return 1;
        }

        wait_ms(10);    /* Let the SET_ADDRESS settle */

        tmp = sizeof(dev->descriptor);

        err = usb_get_descriptor(dev, USB_DT_DEVICE, 0,
                                 &dev->descriptor, sizeof(dev->descriptor));
        if (err < tmp) {
                if (err < 0)
                        printf("unable to get device descriptor (error=%d)\n",
                               err);
                else
                        printf("USB device descriptor short read " \
                                "(expected %i, got %i)\n", tmp, err);
                return 1;
        }
        /* correct le values */
        le16_to_cpus(&dev->descriptor.bcdUSB);
        le16_to_cpus(&dev->descriptor.idVendor);
        le16_to_cpus(&dev->descriptor.idProduct);
        le16_to_cpus(&dev->descriptor.bcdDevice);
        /* only support for one config for now */
        usb_get_configuration_no(dev, &tmpbuf[0], 0);
        usb_parse_config(dev, &tmpbuf[0], 0);
        usb_set_maxpacket(dev);
        /* we set the default configuration here */
        if (usb_set_configuration(dev, dev->config.bConfigurationValue)) {
                printf("failed to set default configuration " \
                        "len %d, status %lX\n", dev->act_len, dev->status);
                return -1;
        }
        USB_PRINTF("new device strings: Mfr=%d, Product=%d, SerialNumber=%d\n",
                   dev->descriptor.iManufacturer, dev->descriptor.iProduct,
                   dev->descriptor.iSerialNumber);
        memset(dev->mf, 0, sizeof(dev->mf));
        memset(dev->prod, 0, sizeof(dev->prod));
        memset(dev->serial, 0, sizeof(dev->serial));
        if (dev->descriptor.iManufacturer)
                usb_string(dev, dev->descriptor.iManufacturer,
                           dev->mf, sizeof(dev->mf));
        if (dev->descriptor.iProduct)
                usb_string(dev, dev->descriptor.iProduct,
                           dev->prod, sizeof(dev->prod));
        if (dev->descriptor.iSerialNumber)
                usb_string(dev, dev->descriptor.iSerialNumber,
                           dev->serial, sizeof(dev->serial));
        USB_PRINTF("Manufacturer %s\n", dev->mf);
        USB_PRINTF("Product      %s\n", dev->prod);
        USB_PRINTF("SerialNumber %s\n", dev->serial);
        /* now prode if the device is a hub */
        usb_hub_probe(dev, 0);
        return 0;
}

/* build device Tree  */
void usb_scan_devices(void)
{
        int i;
        struct usb_device *dev;

        /* first make all devices unknown */
        for (i = 0; i < USB_MAX_DEVICE; i++) {
                memset(&usb_dev[i], 0, sizeof(struct usb_device));
                usb_dev[i].devnum = -1;
        }
        dev_index = 0;
        /* device 0 is always present (root hub, so let it analyze) */
        dev = usb_alloc_new_device();
        if (usb_new_device(dev))
                printf("No USB Device found\n");
        else
                printf("%d USB Device(s) found\n", dev_index);
        /* insert "driver" if possible */
#ifdef CONFIG_USB_KEYBOARD
        drv_usb_kbd_init();
        USB_PRINTF("scan end\n");
#endif
}


/****************************************************************************
 * HUB "Driver"
 * Probes device for being a hub and configurate it
 */

#undef  USB_HUB_DEBUG

#ifdef  USB_HUB_DEBUG
#define USB_HUB_PRINTF(fmt, args...)    printf(fmt , ##args)
#else
#define USB_HUB_PRINTF(fmt, args...)
#endif


static struct usb_hub_device hub_dev[USB_MAX_HUB];
static int usb_hub_index;


int usb_get_hub_descriptor(struct usb_device *dev, void *data, int size)
{
        return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
                USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
                USB_DT_HUB << 8, 0, data, size, USB_CNTL_TIMEOUT);
}

int usb_clear_hub_feature(struct usb_device *dev, int feature)
{
        return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                                USB_REQ_CLEAR_FEATURE, USB_RT_HUB, feature,
                                0, NULL, 0, USB_CNTL_TIMEOUT);
}

int usb_clear_port_feature(struct usb_device *dev, int port, int feature)
{
        return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                                USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature,
                                port, NULL, 0, USB_CNTL_TIMEOUT);
}

int usb_set_port_feature(struct usb_device *dev, int port, int feature)
{
        return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
                                USB_REQ_SET_FEATURE, USB_RT_PORT, feature,
                                port, NULL, 0, USB_CNTL_TIMEOUT);
}

int usb_get_hub_status(struct usb_device *dev, void *data)
{
        return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
                        USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
                        data, sizeof(struct usb_hub_status), USB_CNTL_TIMEOUT);
}

int usb_get_port_status(struct usb_device *dev, int port, void *data)
{
        return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
                        USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port,
                        data, sizeof(struct usb_hub_status), USB_CNTL_TIMEOUT);
}


static void usb_hub_power_on(struct usb_hub_device *hub)
{
        int i;
        struct usb_device *dev;

        dev = hub->pusb_dev;
        /* Enable power to the ports */
        USB_HUB_PRINTF("enabling power on all ports\n");
        for (i = 0; i < dev->maxchild; i++) {
                usb_set_port_feature(dev, i + 1, USB_PORT_FEAT_POWER);
                USB_HUB_PRINTF("port %d returns %lX\n", i + 1, dev->status);
                wait_ms(hub->desc.bPwrOn2PwrGood * 2);
        }
}

void usb_hub_reset(void)
{
        usb_hub_index = 0;
}

struct usb_hub_device *usb_hub_allocate(void)
{
        if (usb_hub_index < USB_MAX_HUB)
                return &hub_dev[usb_hub_index++];

        printf("ERROR: USB_MAX_HUB (%d) reached\n", USB_MAX_HUB);
        return NULL;
}

#define MAX_TRIES 5

static inline char *portspeed(int portstatus)
{
        if (portstatus & (1 << USB_PORT_FEAT_HIGHSPEED))
                return "480 Mb/s";
        else if (portstatus & (1 << USB_PORT_FEAT_LOWSPEED))
                return "1.5 Mb/s";
        else
                return "12 Mb/s";
}

static int hub_port_reset(struct usb_device *dev, int port,
                        unsigned short *portstat)
{
        int tries;
        struct usb_port_status portsts;
        unsigned short portstatus, portchange;

        USB_HUB_PRINTF("hub_port_reset: resetting port %d...\n", port);
        for (tries = 0; tries < MAX_TRIES; tries++) {

                usb_set_port_feature(dev, port + 1, USB_PORT_FEAT_RESET);
                wait_ms(200);

                if (usb_get_port_status(dev, port + 1, &portsts) < 0) {
                        USB_HUB_PRINTF("get_port_status failed status %lX\n",
                                        dev->status);
                        return -1;
                }
                portstatus = le16_to_cpu(portsts.wPortStatus);
                portchange = le16_to_cpu(portsts.wPortChange);

                USB_HUB_PRINTF("portstatus %x, change %x, %s\n",
                                portstatus, portchange,
                                portspeed(portstatus));

                USB_HUB_PRINTF("STAT_C_CONNECTION = %d STAT_CONNECTION = %d" \
                               "  USB_PORT_STAT_ENABLE %d\n",
                        (portchange & USB_PORT_STAT_C_CONNECTION) ? 1 : 0,
                        (portstatus & USB_PORT_STAT_CONNECTION) ? 1 : 0,
                        (portstatus & USB_PORT_STAT_ENABLE) ? 1 : 0);

                if ((portchange & USB_PORT_STAT_C_CONNECTION) ||
                    !(portstatus & USB_PORT_STAT_CONNECTION))
                        return -1;

                if (portstatus & USB_PORT_STAT_ENABLE)
                        break;

                wait_ms(200);
        }

        if (tries == MAX_TRIES) {
                USB_HUB_PRINTF("Cannot enable port %i after %i retries, " \
                                "disabling port.\n", port + 1, MAX_TRIES);
                USB_HUB_PRINTF("Maybe the USB cable is bad?\n");
                return -1;
        }

        usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_RESET);
        *portstat = portstatus;
        return 0;
}


void usb_hub_port_connect_change(struct usb_device *dev, int port)
{
        struct usb_device *usb;
        struct usb_port_status portsts;
        unsigned short portstatus, portchange;

        /* Check status */
        if (usb_get_port_status(dev, port + 1, &portsts) < 0) {
                USB_HUB_PRINTF("get_port_status failed\n");
                return;
        }

        portstatus = le16_to_cpu(portsts.wPortStatus);
        portchange = le16_to_cpu(portsts.wPortChange);
        USB_HUB_PRINTF("portstatus %x, change %x, %s\n",
                        portstatus, portchange, portspeed(portstatus));

        /* Clear the connection change status */
        usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_C_CONNECTION);

        /* Disconnect any existing devices under this port */
        if (((!(portstatus & USB_PORT_STAT_CONNECTION)) &&
             (!(portstatus & USB_PORT_STAT_ENABLE))) || (dev->children[port])) {
                USB_HUB_PRINTF("usb_disconnect(&hub->children[port]);\n");
                /* Return now if nothing is connected */
                if (!(portstatus & USB_PORT_STAT_CONNECTION))
                        return;
        }
        wait_ms(200);

        /* Reset the port */
        if (hub_port_reset(dev, port, &portstatus) < 0) {
                printf("cannot reset port %i!?\n", port + 1);
                return;
        }

        wait_ms(200);

        /* Allocate a new device struct for it */
        usb = usb_alloc_new_device();

        if (portstatus & USB_PORT_STAT_HIGH_SPEED)
                usb->speed = USB_SPEED_HIGH;
        else if (portstatus & USB_PORT_STAT_LOW_SPEED)
                usb->speed = USB_SPEED_LOW;
        else
                usb->speed = USB_SPEED_FULL;

        dev->children[port] = usb;
        usb->parent = dev;
        /* Run it through the hoops (find a driver, etc) */
        if (usb_new_device(usb)) {
                /* Woops, disable the port */
                USB_HUB_PRINTF("hub: disabling port %d\n", port + 1);
                usb_clear_port_feature(dev, port + 1, USB_PORT_FEAT_ENABLE);
        }
}


int usb_hub_configure(struct usb_device *dev)
{
        unsigned char buffer[USB_BUFSIZ], *bitmap;
        struct usb_hub_descriptor *descriptor;
        struct usb_hub_status *hubsts;
        int i;
        struct usb_hub_device *hub;

        /* "allocate" Hub device */
        hub = usb_hub_allocate();
        if (hub == NULL)
                return -1;
        hub->pusb_dev = dev;
        /* Get the the hub descriptor */
        if (usb_get_hub_descriptor(dev, buffer, 4) < 0) {
                USB_HUB_PRINTF("usb_hub_configure: failed to get hub " \
                                   "descriptor, giving up %lX\n", dev->status);
                return -1;
        }
        descriptor = (struct usb_hub_descriptor *)buffer;

        /* silence compiler warning if USB_BUFSIZ is > 256 [= sizeof(char)] */
        i = descriptor->bLength;
        if (i > USB_BUFSIZ) {
                USB_HUB_PRINTF("usb_hub_configure: failed to get hub " \
                                "descriptor - too long: %d\n",
                                descriptor->bLength);
                return -1;
        }

        if (usb_get_hub_descriptor(dev, buffer, descriptor->bLength) < 0) {
                USB_HUB_PRINTF("usb_hub_configure: failed to get hub " \
                                "descriptor 2nd giving up %lX\n", dev->status);
                return -1;
        }
        memcpy((unsigned char *)&hub->desc, buffer, descriptor->bLength);
        /* adjust 16bit values */
        hub->desc.wHubCharacteristics =
                                le16_to_cpu(descriptor->wHubCharacteristics);
        /* set the bitmap */
        bitmap = (unsigned char *)&hub->desc.DeviceRemovable[0];
        /* devices not removable by default */
        memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8);
        bitmap = (unsigned char *)&hub->desc.PortPowerCtrlMask[0];
        memset(bitmap, 0xff, (USB_MAXCHILDREN+1+7)/8); /* PowerMask = 1B */

        for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++)
                hub->desc.DeviceRemovable[i] = descriptor->DeviceRemovable[i];

        for (i = 0; i < ((hub->desc.bNbrPorts + 1 + 7)/8); i++)
                hub->desc.DeviceRemovable[i] = descriptor->PortPowerCtrlMask[i];

        dev->maxchild = descriptor->bNbrPorts;
        USB_HUB_PRINTF("%d ports detected\n", dev->maxchild);

        switch (hub->desc.wHubCharacteristics & HUB_CHAR_LPSM) {
        case 0x00:
                USB_HUB_PRINTF("ganged power switching\n");
                break;
        case 0x01:
                USB_HUB_PRINTF("individual port power switching\n");
                break;
        case 0x02:
        case 0x03:
                USB_HUB_PRINTF("unknown reserved power switching mode\n");
                break;
        }

        if (hub->desc.wHubCharacteristics & HUB_CHAR_COMPOUND)
                USB_HUB_PRINTF("part of a compound device\n");
        else
                USB_HUB_PRINTF("standalone hub\n");

        switch (hub->desc.wHubCharacteristics & HUB_CHAR_OCPM) {
        case 0x00:
                USB_HUB_PRINTF("global over-current protection\n");
                break;
        case 0x08:
                USB_HUB_PRINTF("individual port over-current protection\n");
                break;
        case 0x10:
        case 0x18:
                USB_HUB_PRINTF("no over-current protection\n");
                break;
        }

        USB_HUB_PRINTF("power on to power good time: %dms\n",
                        descriptor->bPwrOn2PwrGood * 2);
        USB_HUB_PRINTF("hub controller current requirement: %dmA\n",
                        descriptor->bHubContrCurrent);

        for (i = 0; i < dev->maxchild; i++)
                USB_HUB_PRINTF("port %d is%s removable\n", i + 1,
                        hub->desc.DeviceRemovable[(i + 1) / 8] & \
                                           (1 << ((i + 1) % 8)) ? " not" : "");

        if (sizeof(struct usb_hub_status) > USB_BUFSIZ) {
                USB_HUB_PRINTF("usb_hub_configure: failed to get Status - " \
                                "too long: %d\n", descriptor->bLength);
                return -1;
        }

        if (usb_get_hub_status(dev, buffer) < 0) {
                USB_HUB_PRINTF("usb_hub_configure: failed to get Status %lX\n",
                                dev->status);
                return -1;
        }

        hubsts = (struct usb_hub_status *)buffer;
        USB_HUB_PRINTF("get_hub_status returned status %X, change %X\n",
                        le16_to_cpu(hubsts->wHubStatus),
                        le16_to_cpu(hubsts->wHubChange));
        USB_HUB_PRINTF("local power source is %s\n",
                (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_LOCAL_POWER) ? \
                "lost (inactive)" : "good");
        USB_HUB_PRINTF("%sover-current condition exists\n",
                (le16_to_cpu(hubsts->wHubStatus) & HUB_STATUS_OVERCURRENT) ? \
                "" : "no ");
        usb_hub_power_on(hub);

        for (i = 0; i < dev->maxchild; i++) {
                struct usb_port_status portsts;
                unsigned short portstatus, portchange;

                if (usb_get_port_status(dev, i + 1, &portsts) < 0) {
                        USB_HUB_PRINTF("get_port_status failed\n");
                        continue;
                }

                portstatus = le16_to_cpu(portsts.wPortStatus);
                portchange = le16_to_cpu(portsts.wPortChange);
                USB_HUB_PRINTF("Port %d Status %X Change %X\n",
                                i + 1, portstatus, portchange);

                if (portchange & USB_PORT_STAT_C_CONNECTION) {
                        USB_HUB_PRINTF("port %d connection change\n", i + 1);
                        usb_hub_port_connect_change(dev, i);
                }
                if (portchange & USB_PORT_STAT_C_ENABLE) {
                        USB_HUB_PRINTF("port %d enable change, status %x\n",
                                        i + 1, portstatus);
                        usb_clear_port_feature(dev, i + 1,
                                                USB_PORT_FEAT_C_ENABLE);

                        /* EM interference sometimes causes bad shielded USB
                         * devices to be shutdown by the hub, this hack enables
                         * them again. Works at least with mouse driver */
                        if (!(portstatus & USB_PORT_STAT_ENABLE) &&
                             (portstatus & USB_PORT_STAT_CONNECTION) &&
                             ((dev->children[i]))) {
                                USB_HUB_PRINTF("already running port %i "  \
                                                "disabled by hub (EMI?), " \
                                                "re-enabling...\n", i + 1);
                                        usb_hub_port_connect_change(dev, i);
                        }
                }
                if (portstatus & USB_PORT_STAT_SUSPEND) {
                        USB_HUB_PRINTF("port %d suspend change\n", i + 1);
                        usb_clear_port_feature(dev, i + 1,
                                                USB_PORT_FEAT_SUSPEND);
                }

                if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
                        USB_HUB_PRINTF("port %d over-current change\n", i + 1);
                        usb_clear_port_feature(dev, i + 1,
                                                USB_PORT_FEAT_C_OVER_CURRENT);
                        usb_hub_power_on(hub);
                }

                if (portchange & USB_PORT_STAT_C_RESET) {
                        USB_HUB_PRINTF("port %d reset change\n", i + 1);
                        usb_clear_port_feature(dev, i + 1,
                                                USB_PORT_FEAT_C_RESET);
                }
        } /* end for i all ports */

        return 0;
}

int usb_hub_probe(struct usb_device *dev, int ifnum)
{
        struct usb_interface_descriptor *iface;
        struct usb_endpoint_descriptor *ep;
        int ret;

        iface = &dev->config.if_desc[ifnum];
        /* Is it a hub? */
        if (iface->bInterfaceClass != USB_CLASS_HUB)
                return 0;
        /* Some hubs have a subclass of 1, which AFAICT according to the */
        /*  specs is not defined, but it works */
        if ((iface->bInterfaceSubClass != 0) &&
            (iface->bInterfaceSubClass != 1))
                return 0;
        /* Multiple endpoints? What kind of mutant ninja-hub is this? */
        if (iface->bNumEndpoints != 1)
                return 0;
        ep = &iface->ep_desc[0];
        /* Output endpoint? Curiousier and curiousier.. */
        if (!(ep->bEndpointAddress & USB_DIR_IN))
                return 0;
        /* If it's not an interrupt endpoint, we'd better punt! */
        if ((ep->bmAttributes & 3) != 3)
                return 0;
        /* We found a hub */
        USB_HUB_PRINTF("USB hub found\n");
        ret = usb_hub_configure(dev);
        return ret;
}

/* EOF */