board/mx1ads/syncflash.c

   1 /*
   2  * board/mx1ads/syncflash.c
   3  *
   4  * (c) Copyright 2004
   5  * Techware Information Technology, Inc.
   6  * http://www.techware.com.tw/
   7  *
   8  * Ming-Len Wu <minglen_wu@techware.com.tw>
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25
  26 #include <common.h>
  27 /*#include <mc9328.h>*/
  28 #include <asm/arch/imx-regs.h>
  29
  30 typedef unsigned long * p_u32;
  31
  32 /* 4Mx16x2 IAM=0 CSD1 */
  33
  34 flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];    /* info for FLASH chips    */
  35
  36 /*  Following Setting is for CSD1       */
  37 #define SFCTL                   0x00221004
  38 #define reg_SFCTL               __REG(SFCTL)
  39
  40 #define SYNCFLASH_A10           (0x00100000)
  41
  42 #define CMD_NORMAL              (0x81020300)                    /* Normal Mode                  */
  43 #define CMD_PREC                (CMD_NORMAL + 0x10000000)       /* Precharge Command            */
  44 #define CMD_AUTO                (CMD_NORMAL + 0x20000000)       /* Auto Refresh Command         */
  45 #define CMD_LMR                 (CMD_NORMAL + 0x30000000)       /* Load Mode Register Command   */
  46 #define CMD_LCR                 (CMD_NORMAL + 0x60000000)       /* LCR Command                  */
  47 #define CMD_PROGRAM             (CMD_NORMAL + 0x70000000)
  48
  49 #define MODE_REG_VAL            (CONFIG_SYS_FLASH_BASE+0x0008CC00)      /* Cas Latency 3                */
  50
  51 /* LCR Command */
  52 #define LCR_READSTATUS          (0x0001C000)                    /* 0x70                         */
  53 #define LCR_ERASE_CONFIRM       (0x00008000)                    /* 0x20                         */
  54 #define LCR_ERASE_NVMODE        (0x0000C000)                    /* 0x30                         */
  55 #define LCR_PROG_NVMODE         (0x00028000)                    /* 0xA0                         */
  56 #define LCR_SR_CLEAR            (0x00014000)                    /* 0x50                         */
  57
  58 /* Get Status register                  */
  59 u32 SF_SR(void) {
  60         u32 tmp,tmp1;
  61
  62         reg_SFCTL       = CMD_PROGRAM;
  63         tmp             = __REG(CONFIG_SYS_FLASH_BASE);
  64
  65         reg_SFCTL       = CMD_NORMAL;
  66
  67         reg_SFCTL       = CMD_LCR;                      /* Activate LCR Mode            */
  68         tmp1            = __REG(CONFIG_SYS_FLASH_BASE + LCR_SR_CLEAR);
  69
  70         return tmp;
  71 }
  72
  73 /* check if SyncFlash is ready          */
  74 u8 SF_Ready(void) {
  75         u32 tmp;
  76
  77         tmp     = SF_SR();
  78
  79         if ((tmp & 0x00800000) && (tmp & 0x001C0000)) {
  80                 printf ("SyncFlash Error code %08x\n",tmp);
  81         };
  82
  83         if ((tmp & 0x00000080) && (tmp & 0x0000001C)) {
  84                 printf ("SyncFlash Error code %08x\n",tmp);
  85         };
  86
  87         if (tmp == 0x00800080)          /* Test Bit 7 of SR     */
  88                 return 1;
  89         else
  90                 return 0;
  91 }
  92
  93 /* Issue the precharge all command              */
  94 void SF_PrechargeAll(void) {
  95
  96         u32 tmp;
  97
  98         reg_SFCTL       = CMD_PREC;                     /* Set Precharge Command        */
  99         tmp             = __REG(CONFIG_SYS_FLASH_BASE + SYNCFLASH_A10); /* Issue Precharge All Command */
 100 }
 101
 102 /* set SyncFlash to normal mode                 */
 103 void SF_Normal(void) {
 104
 105         SF_PrechargeAll();
 106
 107         reg_SFCTL       = CMD_NORMAL;
 108 }
 109
 110 /* Erase SyncFlash                              */
 111 void SF_Erase(u32 RowAddress) {
 112         u32 tmp;
 113
 114         reg_SFCTL       = CMD_NORMAL;
 115         tmp             = __REG(RowAddress);
 116
 117         reg_SFCTL       = CMD_PREC;
 118         tmp             = __REG(RowAddress);
 119
 120         reg_SFCTL       = CMD_LCR;                      /* Set LCR mode         */
 121         __REG(RowAddress + LCR_ERASE_CONFIRM)   = 0;    /* Issue Erase Setup Command    */
 122
 123         reg_SFCTL       = CMD_NORMAL;                   /* return to Normal mode        */
 124         __REG(RowAddress)       = 0xD0D0D0D0;           /* Confirm                      */
 125
 126         while(!SF_Ready());
 127 }
 128
 129 void SF_NvmodeErase(void) {
 130         SF_PrechargeAll();
 131
 132         reg_SFCTL       = CMD_LCR;                      /* Set to LCR mode              */
 133         __REG(CONFIG_SYS_FLASH_BASE + LCR_ERASE_NVMODE)  = 0;   /* Issue Erase Nvmode Reg Command */
 134
 135         reg_SFCTL       = CMD_NORMAL;                   /* Return to Normal mode        */
 136         __REG(CONFIG_SYS_FLASH_BASE + LCR_ERASE_NVMODE) = 0xC0C0C0C0;   /* Confirm              */
 137
 138         while(!SF_Ready());
 139 }
 140
 141 void SF_NvmodeWrite(void) {
 142         SF_PrechargeAll();
 143
 144         reg_SFCTL       = CMD_LCR;                      /* Set to LCR mode              */
 145         __REG(CONFIG_SYS_FLASH_BASE+LCR_PROG_NVMODE) = 0;       /* Issue Program Nvmode reg command */
 146
 147         reg_SFCTL       = CMD_NORMAL;                   /* Return to Normal mode        */
 148         __REG(CONFIG_SYS_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0;      /* Confirm not needed   */
 149 }
 150
 151 /****************************************************************************************/
 152
 153 ulong flash_init(void) {
 154         int i, j;
 155         u32 tmp;
 156
 157 /* Turn on CSD1 for negating RESETSF of SyncFLash */
 158
 159         reg_SFCTL       |= 0x80000000;          /* enable CSD1 for SyncFlash            */
 160         udelay(200);
 161
 162         reg_SFCTL       = CMD_LMR;              /* Set Load Mode Register Command       */
 163         tmp             = __REG(MODE_REG_VAL);  /* Issue Load Mode Register Command     */
 164
 165         SF_Normal();
 166
 167         i = 0;
 168
 169         flash_info[i].flash_id  =  FLASH_MAN_MT | FLASH_MT28S4M16LC;
 170
 171         flash_info[i].size      = FLASH_BANK_SIZE;
 172         flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
 173
 174         memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
 175
 176         for (j = 0; j < flash_info[i].sector_count; j++) {
 177                 flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE + j * 0x00100000;
 178         }
 179
 180         flash_protect(FLAG_PROTECT_SET,
 181                 CONFIG_SYS_FLASH_BASE,
 182                 CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
 183                 &flash_info[0]);
 184
 185         flash_protect(FLAG_PROTECT_SET,
 186                 CONFIG_ENV_ADDR,
 187                 CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 188                 &flash_info[0]);
 189
 190         return FLASH_BANK_SIZE;
 191 }
 192
 193 void flash_print_info (flash_info_t *info) {
 194
 195         int i;
 196
 197         switch (info->flash_id & FLASH_VENDMASK) {
 198                 case (FLASH_MAN_MT & FLASH_VENDMASK):
 199                         printf("Micron: ");
 200                         break;
 201                 default:
 202                         printf("Unknown Vendor ");
 203                         break;
 204         }
 205
 206         switch (info->flash_id & FLASH_TYPEMASK) {
 207                 case (FLASH_MT28S4M16LC & FLASH_TYPEMASK):
 208                         printf("2x FLASH_MT28S4M16LC (16MB Total)\n");
 209                         break;
 210                 default:
 211                         printf("Unknown Chip Type\n");
 212                         return;
 213                         break;
 214         }
 215
 216         printf("  Size: %ld MB in %d Sectors\n",
 217                 info->size >> 20, info->sector_count);
 218
 219         printf("  Sector Start Addresses: ");
 220
 221         for (i = 0; i < info->sector_count; i++) {
 222                 if ((i % 5) == 0)
 223                         printf ("\n   ");
 224
 225                 printf (" %08lX%s", info->start[i],
 226                         info->protect[i] ? " (RO)" : "     ");
 227         }
 228
 229         printf ("\n");
 230 }
 231
 232 /*-----------------------------------------------------------------------*/
 233
 234 int flash_erase (flash_info_t *info, int s_first, int s_last) {
 235         int iflag, cflag, prot, sect;
 236         int rc = ERR_OK;
 237
 238 /* first look for protection bits */
 239
 240         if (info->flash_id == FLASH_UNKNOWN)
 241                 return ERR_UNKNOWN_FLASH_TYPE;
 242
 243         if ((s_first < 0) || (s_first > s_last))
 244                 return ERR_INVAL;
 245
 246         if ((info->flash_id & FLASH_VENDMASK) != (FLASH_MAN_MT & FLASH_VENDMASK))
 247                 return ERR_UNKNOWN_FLASH_VENDOR;
 248
 249         prot = 0;
 250
 251         for (sect = s_first; sect <= s_last; ++sect) {
 252                 if (info->protect[sect])
 253                         prot++;
 254         }
 255
 256         if (prot) {
 257                 printf("protected!\n");
 258                 return ERR_PROTECTED;
 259         }
 260 /*
 261  * Disable interrupts which might cause a timeout
 262  * here. Remember that our exception vectors are
 263  * at address 0 in the flash, and we don't want a
 264  * (ticker) exception to happen while the flash
 265  * chip is in programming mode.
 266  */
 267
 268         cflag = icache_status();
 269         icache_disable();
 270         iflag = disable_interrupts();
 271
 272 /* Start erase on unprotected sectors */
 273         for (sect = s_first; sect <= s_last && !ctrlc(); sect++) {
 274
 275                 printf("Erasing sector %2d ... ", sect);
 276
 277 /* arm simple, non interrupt dependent timer */
 278
 279                 reset_timer_masked();
 280
 281                 SF_NvmodeErase();
 282                 SF_NvmodeWrite();
 283
 284                 SF_Erase(CONFIG_SYS_FLASH_BASE + (0x0100000 * sect));
 285                 SF_Normal();
 286
 287                 printf("ok.\n");
 288         }
 289
 290         if (ctrlc())
 291                 printf("User Interrupt!\n");
 292
 293         if (iflag)
 294                 enable_interrupts();
 295
 296         if (cflag)
 297                 icache_enable();
 298
 299         return rc;
 300 }
 301
 302 /*-----------------------------------------------------------------------
 303  * Copy memory to flash.
 304  */
 305
 306 int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) {
 307         int i;
 308
 309         for(i = 0; i < cnt; i += 4) {
 310
 311                 SF_PrechargeAll();
 312
 313                 reg_SFCTL       = CMD_PROGRAM;          /* Enter SyncFlash Program mode */
 314                 __REG(addr + i) = __REG((u32)src  + i);
 315
 316                 while(!SF_Ready());
 317         }
 318
 319         SF_Normal();
 320
 321         return ERR_OK;
 322 }