t1100: test tg migrate-bases command

[topgit/pro.git] / t / README-WRITING-TESTS

Writing Tests
=============

The point of the testing library (available by sourcing the
test-lib.sh file) is to assist with rapidly writing robust
tests that produce TAP-compliant output.  (For a quick primer
on TAP see the README file in the section "TAP - A Quick Overview".)

For a reference guide to the testing library itself see the
README-TESTLIB file.  For a "how-to" write tests using the testing
library, keep reading.


-----------------
Test Script Names
-----------------

Test scripts should be executable POSIX-shell scripts named with an
initial `t` followed by four (4) digits, a hyphen, more descriptive text
and a `.sh` suffix.  In other words something like:

    tNNNN-my-test-script.sh

where the "NNNN" part is a four-digit decimal number.


--------------------
Test Script Contents
--------------------

Each executable test script file should contain (in this order) these
elements:

  1. A "shebang" line `#!/bin/sh` as the first line
  2. A non-empty assignment to the `test_description` variable
  3. A line sourcing the test library with `. ./test-lib.sh`
  4. An optional call to the `test_plan` function if you're nice
  5. One or more calls to `test_expect_...`/`test_tolerate_...` functions
  6. A call to the `test_done` function

Additional shell variable assignments, function definitions and other shell
code may be interspersed between the "shebang" line and the `test_done` line
(since `test_done` causes `exit` to be called nothing after it will be run).

Here's an example `t0000-test-true.sh` script:

```sh

#!/bin/sh

test_description='test the true utility'

. ./test-lib.sh

test_plan 2

test_expect_success 'test true utility' '
        true
'

test_expect_failure 'test ! true utility' '
        ! true
'

test_done

```


test_plan
~~~~~~~~~

The `test_plan 2` line causes a `1..2` line to be output to standard output
telling the TAP processor to expect two test result lines.

The TAP protocol allows this line to be output either _before all_ or
_after all_ of the test result lines.  Calling `test_plan` causes it to be
output before, omitting the `test_plan` line causes it to be output after (when
the `test_done` function is called).

If you are nice and can count you include a `test_plan` call so that the TAP
harness can output a decent progress display for test scripts with a lot of
subtests in them.  If you are not so nice (or just plain lazy) you don't.


test_expect_success
~~~~~~~~~~~~~~~~~~~

The example `test_expect_success` call shown above essentially becomes this:

```sh

if eval "true"; then
        echo "ok 1 - test true utility"
else
        echo "not ok 1 - test true utility"
fi

```


test_expect_failure
~~~~~~~~~~~~~~~~~~~

The example `test_expect_failure` call shown above essentially becomes this:

```sh

if eval "! true"; then
        echo "ok 2 - test ! true utility # TODO known breakage vanished"
else
        echo "not ok 2 - test ! true utility # TODO known breakage"
fi

```

---------------------
Non-Zero Result Codes
---------------------

Sometimes a test "passes" when the command being run returns a non-zero result
code.

For example, this must produce a non-zero result code to pass:

    git -c my.bad=nada config --bool my.bad

So you could simply write this into the test script:

    ! git -c my.bad=nada config --bool my.bad

The problem with that is that _any_ non-zero result code will cause it to
succeed even if it dies because of a signal or because the command wasn't found
or wasn't executable.

The testing library provides three different functions to help with this:

  * `test_must_fail`  
    Any non-signal exit failure is allowed (but it can be extended with an
    optional first argument to also permit success and/or `SIGPIPE`).
  * `test_might_fail`  
    This is just a shortcut for calling `test_must_fail` with the optional
    first argument to also allow success.  The end result being that any
    non-signal error _or_ success is allowed.
  * `test_expect_code`  
    The required first argument is the explicit (and only) allowed exit code.

So given those utility functions and knowing that `git` exits with a 128 status
for the bad boolean, either of these would work:

    test_must_fail git -c my.bad=nada config --bool my.bad
    test_expect_code 128 git -c my.bad=nada config --bool my.bad

If you want to be picky and require an exact non-zero exit code use the
`test_expect_code` function.  Otherwise, to just require a non-signal and
non-zero exit code use the `test_must_fail` function.

An example of when to use the `test_might_fail` option would be when using the
`git config --unset` command -- it fails if the value being unset is not
already set.  If you're using it you probably do not care that the value was
not present just that if it is present it's successfully removed and as long
as the command does not exit because of a signal like a segment violation it's
probably fine.

That can be done like so:

    test_might_fail git config --unset might-not.be-set


-------------------------------
Scripts, Functions and Failures
-------------------------------

This is a perfectly valid test script fragment:

    run_test_one() {
        # do some testing
        test_must_fail blah blah blah
        # do some more testing
        blah blah blah
    }
    
    test_expect_success 'sample' 'run_test_one'

However, should the test fail, when the failing "script" is output to the log
the only thing shown will be the single line `run_test_one` which is unlikely
to be of much help diagnosing the problem.

Instead the above is typically written like so:

    test_expect_success 'sample' '
        # do some testing
        test_must_fail blah blah blah
        # do some more testing
        blah blah blah
    '

It's just as readble, just as efficient and should it fail every line in the
test "script" will appear in the log.

A problem sometimes arises with the quoting.  If the test script itself involves
some complicated quoting, munging that so that it can be a single-quoted
argument can be horribly confounding at times.

There are two solutions to the problem.  Either move the noxious quoting issue
into a separate function and call that from the single-quoted test "script" or
use the special "-" script.

Anything moved into an external function will not appear in the log of any
failures (sometimes this is a good thing to keep the log more succinct.  It
may make sense for "uninteresting" parts of the test "script" to be placed into
external functions anyway for this reason).

However, when there is a confounding quotation issue but the lines in question
really do belong in the log of any failures the special "-" script can be used
to read the script from standard input as a "HERE" document like so:

    test_expect_success 'sample' - <<'SCRIPT'
        # do some testing
        test_must_fail blah blah blah
        # do some more testing
        blah blah blah
        # Inside a 'quoted "here doc there are no quoting issues
    SCRIPT

The single drawback to this approach is that it's less efficient than either of
the others (a `cat` process must be spawned to read the script) so should be
reserved for only those unique cases of confounding quotation quandaries.


--------------------
Test Chaining and &&
--------------------

Consider this test script fragment:

    test_expect_success 'four lines' '
        one
        two
        three
        four
    '

What happens if "two" fails but none of the others do?

The answer is "it depends" ;)  In the Git version of the testing framework the
answer is that the failure of "two" would always be overlooked.

However, both the Git version (and this version) contain a "feature" called
test chain linting that tries to determine whether or not all of the statements
in the test were chained together with '&&' to avoid this.

This "feature" is enabled by default and controlled by the
`TESTLIB_TEST_CHAIN_LINT` variable which may be altered on a per-subtest basis
or the default changed for an entire test script using the `--chain-lint` or
`--no-chain-lint` option.

When enabled (the default) it will complain about the above test (with a nasty
message of "broken &&-chain") and "Bail out!"

Rewriting the script thusly:

    test_expect_success 'four lines' '
        one &&
        two &&
        three &&
        four
    '

satisfies the test chain monster and solves the problem where the result of a
failing "two" could be ignored.

However, the chain linting monster is not terribly smart and this version
escapes its grasp:

    test_expect_success 'four lines' '{
        one
        two
        three
        four
    }'

So while it is indeed helpful in finding these things, it's not foolproof.

Here's where the difference compared with the Git version comes in.  This
version of the testing library normally "eval"s the "script" in a subshell
which Git's version does not.  (This can be controlled with the
`TESTLIB_TEST_NO_SUBSHELL` variable if necessary.)

As a bonus, when the subshell functionality is _not_ disabled (the default)
the "script" is run in a `set -e` (aka `set -o errexit`) subshell environment.

That's not always foolproof either but it is an improvement and as a result
this version of the testing library will, indeed, catch a failure of just the
"two" command in the final example above that uses the `{`...`}` version.


-----------------
More On Subshells
-----------------

This will not work as expected:

    test_expect_success 'first' '
        : it works &&
        itworked=1
    '
    
    test_expect_success 'check' '
        test "$itworked" = "1"
    '

While it _will_ succeed in Git's version of the testing library, it will fail
by default in this one because each test is "eval"'d in a subshell by default.

This also means the `test_when_finished` function normally does not work either
(although that may eventually be corrected).

To make it so that the first test can affect the environment of the test script
the `TESTLIB_TEST_NO_SUBSHELL` variable can be set like so:

    TESTLIB_TEST_NO_SUBSHELL=1
    test_expect_success 'first' '
        : it works &&
        itworked=1
    '
    unset TESTLIB_TEST_NO_SUBSHELL
    
    test_expect_success 'check' '
        test "$itworked" = "1"
    '

Strictly speaking it does not need to be unset before the "check" second
subtest but it doesn't hurt to do so since it is only the first subtest that
needs to modify the environment of the test script (the "check" subtest just
reads it but does not modify it).

Setting `TESTLIB_TEST_NO_SUBSHELL` also allows the `test_when_finished`
function to work (assuming it's used in a context where it would otherwise have
worked).

Avoid setting the `TESTLIB_TEST_NO_SUBSHELL` if at all possible because
allowing subtests to affect the environment of the test script itself can
inadvertently cause subsequent subtests to pass when they shouldn't or
vice versa in sometimes very subtle and hard to detect ways.

For example, a test script with a hundred subtests in it where one of the early
subtests leaves behind a variable turd in a variable that one of the later
subtests assumes is unset.  In a test script with many subtests this
cross-subtest variable contamination is not really all that uncommon and the
default of running each subtest in a subshell prevents it from happening in the
first place.

The test script runs in its very own trash directory.  If you really, really,
really (but not just "really, really" ;) need to communicate information from
inside one of the subtest "eval" scripts back out, have it write the
information into a temporary file in the current directory.

Sometimes just a "flag" is enough so simply creating a file and then testing
for its existence will do.  The same cross-subtest contamination problem is
possible with this mechanism as well.  It's best to treat each subtest as a
black box into which information flows but only a single "ok" or "not ok" comes
back out.

If all that's needed is to check whether or not the previous subtest succeeded
then the `LASTOK` prerequisite may be used as described in the next section.


-----------------------------
Chaining Subtests with LASTOK
-----------------------------

Sometimes while two consecutive subtests are logically separate tests that do
not belong in a single test, it does not make sense to run the second (or
several subsequent subtests) if the first one fails.

The special `LASTOK` prerequisite can be used to skip a subtest if the last
non-skipped subtest in the test script did not succeed.  For the purpose
of the `LASTOK` prerequisite check, "succeed" means any test result line (even
if it was ultimately suppressed due to `$test_external_has_tap` not being `0`)
that begins with "ok".  Any "# SKIP" result lines are totally ignored and do
not change the state of the `LASTOK` prerequisite.

When a test script starts, the `LASTOK` prerequisite is implicitly true so that
it will succeed if used on the first subtest in a script file.

Here's an example script to consider:

```sh
#!/bin/sh

test_description="LASTOK example"

. ./test-lib.sh

test_plan 4 # 'cause we can count

test_expect_success 'works' ':'
test_expect_success LASTOK 'followup' ':'
test_expect_success LASTOK 'confirm' 'echo last was ok'
test_expect_success !LASTOK 'alt' 'echo last was not ok'

test_done
```

When run, subtests 1-3 are "ok" and subtest 4 is "ok # SKIP".

If the "script" for the first subtest is changed to "! :" instead then
subtest 1 is "not ok", subtests 2-3 are "ok # SKIP" and subtest 4 is "ok".

Notice how the skipped subtest 2 does not change the value of the `LASTOK`
prerequisite check in this case so that subtest 3 is also skipped which also
does not affect the value of `LASTOK` allowing subtest 4 to _not_ be skipped.

If the first subtest is changed to `test_expect_failure` still using the
altered "! :" script then subtest 1 is "not ok # TODO", subtests 2-3 are
"ok # SKIP" and subtest 4 is "ok".

The difference between using `test_expect_success` and `test_expect_failure`
with the altered script "! :" on the first subtest is that using
`test_expect_success` means the outcome is "1 of 4 failed" versus the
`test_expect_failure` result of "all 4 passed".

The `LASTOK` literally checks for the "ok" not whether it's a "# TODO" or not.