openssl update to 1.0.1i

[tomato/tomato-dir865l.git] / release / src / router / openssl / doc / apps / x509v3_config.pod

=pod

=for comment openssl_manual_section:5

=head1 NAME

x509v3_config - X509 V3 certificate extension configuration format

=head1 DESCRIPTION

Several of the OpenSSL utilities can add extensions to a certificate or
certificate request based on the contents of a configuration file.

Typically the application will contain an option to point to an extension
section. Each line of the extension section takes the form:

 extension_name=[critical,] extension_options

If B<critical> is present then the extension will be critical.

The format of B<extension_options> depends on the value of B<extension_name>.

There are four main types of extension: I<string> extensions, I<multi-valued>
extensions, I<raw> and I<arbitrary> extensions.

String extensions simply have a string which contains either the value itself
or how it is obtained.

For example:

 nsComment="This is a Comment"

Multi-valued extensions have a short form and a long form. The short form
is a list of names and values:

 basicConstraints=critical,CA:true,pathlen:1

The long form allows the values to be placed in a separate section:

 basicConstraints=critical,@bs_section

 [bs_section]

 CA=true
 pathlen=1

Both forms are equivalent.

The syntax of raw extensions is governed by the extension code: it can
for example contain data in multiple sections. The correct syntax to
use is defined by the extension code itself: check out the certificate
policies extension for an example.

If an extension type is unsupported then the I<arbitrary> extension syntax
must be used, see the L<ARBITRARY EXTENSIONS|/"ARBITRARY EXTENSIONS"> section for more details.

=head1 STANDARD EXTENSIONS

The following sections describe each supported extension in detail.

=head2 Basic Constraints.

This is a multi valued extension which indicates whether a certificate is
a CA certificate. The first (mandatory) name is B<CA> followed by B<TRUE> or
B<FALSE>. If B<CA> is B<TRUE> then an optional B<pathlen> name followed by an
non-negative value can be included.

For example:

 basicConstraints=CA:TRUE

 basicConstraints=CA:FALSE

 basicConstraints=critical,CA:TRUE, pathlen:0

A CA certificate B<must> include the basicConstraints value with the CA field
set to TRUE. An end user certificate must either set CA to FALSE or exclude the
extension entirely. Some software may require the inclusion of basicConstraints
with CA set to FALSE for end entity certificates.

The pathlen parameter indicates the maximum number of CAs that can appear
below this one in a chain. So if you have a CA with a pathlen of zero it can
only be used to sign end user certificates and not further CAs.


=head2 Key Usage.

Key usage is a multi valued extension consisting of a list of names of the
permitted key usages.

The supporte names are: digitalSignature, nonRepudiation, keyEncipherment,
dataEncipherment, keyAgreement, keyCertSign, cRLSign, encipherOnly
and decipherOnly.

Examples:

 keyUsage=digitalSignature, nonRepudiation

 keyUsage=critical, keyCertSign


=head2 Extended Key Usage.

This extensions consists of a list of usages indicating purposes for which
the certificate public key can be used for,

These can either be object short names of the dotted numerical form of OIDs.
While any OID can be used only certain values make sense. In particular the
following PKIX, NS and MS values are meaningful:

 Value                  Meaning
 -----                  -------
 serverAuth             SSL/TLS Web Server Authentication.
 clientAuth             SSL/TLS Web Client Authentication.
 codeSigning            Code signing.
 emailProtection        E-mail Protection (S/MIME).
 timeStamping           Trusted Timestamping
 msCodeInd              Microsoft Individual Code Signing (authenticode)
 msCodeCom              Microsoft Commercial Code Signing (authenticode)
 msCTLSign              Microsoft Trust List Signing
 msSGC                  Microsoft Server Gated Crypto
 msEFS                  Microsoft Encrypted File System
 nsSGC                  Netscape Server Gated Crypto

Examples:

 extendedKeyUsage=critical,codeSigning,1.2.3.4
 extendedKeyUsage=nsSGC,msSGC


=head2 Subject Key Identifier.

This is really a string extension and can take two possible values. Either
the word B<hash> which will automatically follow the guidelines in RFC3280
or a hex string giving the extension value to include. The use of the hex
string is strongly discouraged.

Example:

 subjectKeyIdentifier=hash


=head2 Authority Key Identifier.

The authority key identifier extension permits two options. keyid and issuer:
both can take the optional value "always".

If the keyid option is present an attempt is made to copy the subject key
identifier from the parent certificate. If the value "always" is present
then an error is returned if the option fails.

The issuer option copies the issuer and serial number from the issuer
certificate. This will only be done if the keyid option fails or
is not included unless the "always" flag will always include the value.

Example:

 authorityKeyIdentifier=keyid,issuer


=head2 Subject Alternative Name.

The subject alternative name extension allows various literal values to be
included in the configuration file. These include B<email> (an email address)
B<URI> a uniform resource indicator, B<DNS> (a DNS domain name), B<RID> (a
registered ID: OBJECT IDENTIFIER), B<IP> (an IP address), B<dirName>
(a distinguished name) and otherName.

The email option include a special 'copy' value. This will automatically
include and email addresses contained in the certificate subject name in
the extension.

The IP address used in the B<IP> options can be in either IPv4 or IPv6 format.

The value of B<dirName> should point to a section containing the distinguished
name to use as a set of name value pairs. Multi values AVAs can be formed by
prefacing the name with a B<+> character.

otherName can include arbitrary data associated with an OID: the value
should be the OID followed by a semicolon and the content in standard
L<ASN1_generate_nconf(3)|ASN1_generate_nconf(3)> format.

Examples:

 subjectAltName=email:copy,email:my@other.address,URI:http://my.url.here/
 subjectAltName=IP:192.168.7.1
 subjectAltName=IP:13::17
 subjectAltName=email:my@other.address,RID:1.2.3.4
 subjectAltName=otherName:1.2.3.4;UTF8:some other identifier

 subjectAltName=dirName:dir_sect

 [dir_sect]
 C=UK
 O=My Organization
 OU=My Unit
 CN=My Name


=head2 Issuer Alternative Name.

The issuer alternative name option supports all the literal options of
subject alternative name. It does B<not> support the email:copy option because
that would not make sense. It does support an additional issuer:copy option
that will copy all the subject alternative name values from the issuer 
certificate (if possible).

Example:

 issuserAltName = issuer:copy


=head2 Authority Info Access.

The authority information access extension gives details about how to access
certain information relating to the CA. Its syntax is accessOID;location
where I<location> has the same syntax as subject alternative name (except
that email:copy is not supported). accessOID can be any valid OID but only
certain values are meaningful, for example OCSP and caIssuers.

Example:

 authorityInfoAccess = OCSP;URI:http://ocsp.my.host/
 authorityInfoAccess = caIssuers;URI:http://my.ca/ca.html


=head2 CRL distribution points.

This is a multi-valued extension whose options can be either in name:value pair
using the same form as subject alternative name or a single value representing
a section name containing all the distribution point fields.

For a name:value pair a new DistributionPoint with the fullName field set to
the given value both the cRLissuer and reasons fields are omitted in this case.

In the single option case the section indicated contains values for each
field. In this section:

If the name is "fullname" the value field should contain the full name
of the distribution point in the same format as subject alternative name.

If the name is "relativename" then the value field should contain a section
name whose contents represent a DN fragment to be placed in this field.

The name "CRLIssuer" if present should contain a value for this field in
subject alternative name format.

If the name is "reasons" the value field should consist of a comma
separated field containing the reasons. Valid reasons are: "keyCompromise",
"CACompromise", "affiliationChanged", "superseded", "cessationOfOperation",
"certificateHold", "privilegeWithdrawn" and "AACompromise".


Simple examples:

 crlDistributionPoints=URI:http://myhost.com/myca.crl
 crlDistributionPoints=URI:http://my.com/my.crl,URI:http://oth.com/my.crl

Full distribution point example:

 crlDistributionPoints=crldp1_section

 [crldp1_section]

 fullname=URI:http://myhost.com/myca.crl
 CRLissuer=dirName:issuer_sect
 reasons=keyCompromise, CACompromise

 [issuer_sect]
 C=UK
 O=Organisation
 CN=Some Name

=head2 Issuing Distribution Point

This extension should only appear in CRLs. It is a multi valued extension
whose syntax is similar to the "section" pointed to by the CRL distribution
points extension with a few differences.

The names "reasons" and "CRLissuer" are not recognized.

The name "onlysomereasons" is accepted which sets this field. The value is
in the same format as the CRL distribution point "reasons" field.

The names "onlyuser", "onlyCA", "onlyAA" and "indirectCRL" are also accepted
the values should be a boolean value (TRUE or FALSE) to indicate the value of
the corresponding field.

Example:

 issuingDistributionPoint=critical, @idp_section

 [idp_section]

 fullname=URI:http://myhost.com/myca.crl
 indirectCRL=TRUE
 onlysomereasons=keyCompromise, CACompromise

 [issuer_sect]
 C=UK
 O=Organisation
 CN=Some Name


=head2 Certificate Policies.

This is a I<raw> extension. All the fields of this extension can be set by
using the appropriate syntax.

If you follow the PKIX recommendations and just using one OID then you just
include the value of that OID. Multiple OIDs can be set separated by commas,
for example:

 certificatePolicies= 1.2.4.5, 1.1.3.4

If you wish to include qualifiers then the policy OID and qualifiers need to
be specified in a separate section: this is done by using the @section syntax
instead of a literal OID value.

The section referred to must include the policy OID using the name
policyIdentifier, cPSuri qualifiers can be included using the syntax:

 CPS.nnn=value

userNotice qualifiers can be set using the syntax:

 userNotice.nnn=@notice

The value of the userNotice qualifier is specified in the relevant section.
This section can include explicitText, organization and noticeNumbers
options. explicitText and organization are text strings, noticeNumbers is a
comma separated list of numbers. The organization and noticeNumbers options
(if included) must BOTH be present. If you use the userNotice option with IE5
then you need the 'ia5org' option at the top level to modify the encoding:
otherwise it will not be interpreted properly.

Example:

 certificatePolicies=ia5org,1.2.3.4,1.5.6.7.8,@polsect

 [polsect]

 policyIdentifier = 1.3.5.8
 CPS.1="http://my.host.name/"
 CPS.2="http://my.your.name/"
 userNotice.1=@notice

 [notice]

 explicitText="Explicit Text Here"
 organization="Organisation Name"
 noticeNumbers=1,2,3,4

The B<ia5org> option changes the type of the I<organization> field. In RFC2459
it can only be of type DisplayText. In RFC3280 IA5Strring is also permissible.
Some software (for example some versions of MSIE) may require ia5org.

=head2 Policy Constraints

This is a multi-valued extension which consisting of the names
B<requireExplicitPolicy> or B<inhibitPolicyMapping> and a non negative intger
value. At least one component must be present.

Example:

 policyConstraints = requireExplicitPolicy:3


=head2 Inhibit Any Policy

This is a string extension whose value must be a non negative integer.

Example:

 inhibitAnyPolicy = 2


=head2 Name Constraints

The name constraints extension is a multi-valued extension. The name should
begin with the word B<permitted> or B<excluded> followed by a B<;>. The rest of
the name and the value follows the syntax of subjectAltName except email:copy
is not supported and the B<IP> form should consist of an IP addresses and 
subnet mask separated by a B</>.

Examples:

 nameConstraints=permitted;IP:192.168.0.0/255.255.0.0

 nameConstraints=permitted;email:.somedomain.com

 nameConstraints=excluded;email:.com


=head2 OCSP No Check

The OCSP No Check extension is a string extension but its value is ignored.

Example:

 noCheck = ignored


=head1 DEPRECATED EXTENSIONS

The following extensions are non standard, Netscape specific and largely
obsolete. Their use in new applications is discouraged.

=head2 Netscape String extensions.

Netscape Comment (B<nsComment>) is a string extension containing a comment
which will be displayed when the certificate is viewed in some browsers.

Example:

 nsComment = "Some Random Comment"

Other supported extensions in this category are: B<nsBaseUrl>,
B<nsRevocationUrl>, B<nsCaRevocationUrl>, B<nsRenewalUrl>, B<nsCaPolicyUrl>
and B<nsSslServerName>.


=head2 Netscape Certificate Type

This is a multi-valued extensions which consists of a list of flags to be
included. It was used to indicate the purposes for which a certificate could
be used. The basicConstraints, keyUsage and extended key usage extensions are
now used instead.

Acceptable values for nsCertType are: B<client>, B<server>, B<email>,
B<objsign>, B<reserved>, B<sslCA>, B<emailCA>, B<objCA>.


=head1 ARBITRARY EXTENSIONS

If an extension is not supported by the OpenSSL code then it must be encoded
using the arbitrary extension format. It is also possible to use the arbitrary
format for supported extensions. Extreme care should be taken to ensure that
the data is formatted correctly for the given extension type.

There are two ways to encode arbitrary extensions.

The first way is to use the word ASN1 followed by the extension content
using the same syntax as L<ASN1_generate_nconf(3)|ASN1_generate_nconf(3)>.
For example:

 1.2.3.4=critical,ASN1:UTF8String:Some random data

 1.2.3.4=ASN1:SEQUENCE:seq_sect

 [seq_sect]

 field1 = UTF8:field1
 field2 = UTF8:field2

It is also possible to use the word DER to include the raw encoded data in any
extension.

 1.2.3.4=critical,DER:01:02:03:04
 1.2.3.4=DER:01020304

The value following DER is a hex dump of the DER encoding of the extension
Any extension can be placed in this form to override the default behaviour.
For example:

 basicConstraints=critical,DER:00:01:02:03

=head1 WARNING

There is no guarantee that a specific implementation will process a given
extension. It may therefore be sometimes possible to use certificates for
purposes prohibited by their extensions because a specific application does
not recognize or honour the values of the relevant extensions.

The DER and ASN1 options should be used with caution. It is possible to create
totally invalid extensions if they are not used carefully.


=head1 NOTES

If an extension is multi-value and a field value must contain a comma the long
form must be used otherwise the comma would be misinterpreted as a field
separator. For example:

 subjectAltName=URI:ldap://somehost.com/CN=foo,OU=bar

will produce an error but the equivalent form:

 subjectAltName=@subject_alt_section

 [subject_alt_section]
 subjectAltName=URI:ldap://somehost.com/CN=foo,OU=bar

is valid. 

Due to the behaviour of the OpenSSL B<conf> library the same field name
can only occur once in a section. This means that:

 subjectAltName=@alt_section

 [alt_section]

 email=steve@here
 email=steve@there

will only recognize the last value. This can be worked around by using the form:

 [alt_section]

 email.1=steve@here
 email.2=steve@there

=head1 HISTORY

The X509v3 extension code was first added to OpenSSL 0.9.2.

Policy mappings, inhibit any policy and name constraints support was added in
OpenSSL 0.9.8

The B<directoryName> and B<otherName> option as well as the B<ASN1> option
for arbitrary extensions was added in OpenSSL 0.9.8

=head1 SEE ALSO

L<req(1)|req(1)>, L<ca(1)|ca(1)>, L<x509(1)|x509(1)>,
L<ASN1_generate_nconf(3)|ASN1_generate_nconf(3)>


=cut