release/src/router/libsodium/Makefile.in

   1 # Makefile.in generated by automake 1.15 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2014 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 VPATH = @srcdir@
  18 am__is_gnu_make = { \
  19   if test -z '$(MAKELEVEL)'; then \
  20     false; \
  21   elif test -n '$(MAKE_HOST)'; then \
  22     true; \
  23   elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
  24     true; \
  25   else \
  26     false; \
  27   fi; \
  28 }
  29 am__make_running_with_option = \
  30   case $${target_option-} in \
  31       ?) ;; \
  32       *) echo "am__make_running_with_option: internal error: invalid" \
  33               "target option '$${target_option-}' specified" >&2; \
  34          exit 1;; \
  35   esac; \
  36   has_opt=no; \
  37   sane_makeflags=$$MAKEFLAGS; \
  38   if $(am__is_gnu_make); then \
  39     sane_makeflags=$$MFLAGS; \
  40   else \
  41     case $$MAKEFLAGS in \
  42       *\\[\ \   ]*) \
  43         bs=\\; \
  44         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  45           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  46     esac; \
  47   fi; \
  48   skip_next=no; \
  49   strip_trailopt () \
  50   { \
  51     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  52   }; \
  53   for flg in $$sane_makeflags; do \
  54     test $$skip_next = yes && { skip_next=no; continue; }; \
  55     case $$flg in \
  56       *=*|--*) continue;; \
  57         -*I) strip_trailopt 'I'; skip_next=yes;; \
  58       -*I?*) strip_trailopt 'I';; \
  59         -*O) strip_trailopt 'O'; skip_next=yes;; \
  60       -*O?*) strip_trailopt 'O';; \
  61         -*l) strip_trailopt 'l'; skip_next=yes;; \
  62       -*l?*) strip_trailopt 'l';; \
  63       -[dEDm]) skip_next=yes;; \
  64       -[JT]) skip_next=yes;; \
  65     esac; \
  66     case $$flg in \
  67       *$$target_option*) has_opt=yes; break;; \
  68     esac; \
  69   done; \
  70   test $$has_opt = yes
  71 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  72 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  73 pkgdatadir = $(datadir)/@PACKAGE@
  74 pkgincludedir = $(includedir)/@PACKAGE@
  75 pkglibdir = $(libdir)/@PACKAGE@
  76 pkglibexecdir = $(libexecdir)/@PACKAGE@
  77 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  78 install_sh_DATA = $(install_sh) -c -m 644
  79 install_sh_PROGRAM = $(install_sh) -c
  80 install_sh_SCRIPT = $(install_sh) -c
  81 INSTALL_HEADER = $(INSTALL_DATA)
  82 transform = $(program_transform_name)
  83 NORMAL_INSTALL = :
  84 PRE_INSTALL = :
  85 POST_INSTALL = :
  86 NORMAL_UNINSTALL = :
  87 PRE_UNINSTALL = :
  88 POST_UNINSTALL = :
  89 build_triplet = @build@
  90 host_triplet = @host@
  91 subdir = .
  92 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  93 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_compile_flag.m4 \
  94         $(top_srcdir)/m4/ax_check_define.m4 \
  95         $(top_srcdir)/m4/ax_check_link_flag.m4 \
  96         $(top_srcdir)/m4/ax_pthread.m4 \
  97         $(top_srcdir)/m4/ax_valgrind_check.m4 \
  98         $(top_srcdir)/m4/ld-output-def.m4 $(top_srcdir)/m4/libtool.m4 \
  99         $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
 100         $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
 101         $(top_srcdir)/configure.ac
 102 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 103         $(ACLOCAL_M4)
 104 DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
 105         $(am__configure_deps) $(am__DIST_COMMON)
 106 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 107  configure.lineno config.status.lineno
 108 mkinstalldirs = $(install_sh) -d
 109 CONFIG_CLEAN_FILES = libsodium.pc libsodium-uninstalled.pc \
 110         src/libsodium/include/sodium/version.h
 111 CONFIG_CLEAN_VPATH_FILES =
 112 AM_V_P = $(am__v_P_@AM_V@)
 113 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 114 am__v_P_0 = false
 115 am__v_P_1 = :
 116 AM_V_GEN = $(am__v_GEN_@AM_V@)
 117 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 118 am__v_GEN_0 = @echo "  GEN     " $@;
 119 am__v_GEN_1 =
 120 AM_V_at = $(am__v_at_@AM_V@)
 121 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 122 am__v_at_0 = @
 123 am__v_at_1 =
 124 SOURCES =
 125 DIST_SOURCES =
 126 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
 127         ctags-recursive dvi-recursive html-recursive info-recursive \
 128         install-data-recursive install-dvi-recursive \
 129         install-exec-recursive install-html-recursive \
 130         install-info-recursive install-pdf-recursive \
 131         install-ps-recursive install-recursive installcheck-recursive \
 132         installdirs-recursive pdf-recursive ps-recursive \
 133         tags-recursive uninstall-recursive
 134 am__can_run_installinfo = \
 135   case $$AM_UPDATE_INFO_DIR in \
 136     n|no|NO) false;; \
 137     *) (install-info --version) >/dev/null 2>&1;; \
 138   esac
 139 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 140 am__vpath_adj = case $$p in \
 141     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 142     *) f=$$p;; \
 143   esac;
 144 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 145 am__install_max = 40
 146 am__nobase_strip_setup = \
 147   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 148 am__nobase_strip = \
 149   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 150 am__nobase_list = $(am__nobase_strip_setup); \
 151   for p in $$list; do echo "$$p $$p"; done | \
 152   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 153   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 154     if (++n[$$2] == $(am__install_max)) \
 155       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 156     END { for (dir in files) print dir, files[dir] }'
 157 am__base_list = \
 158   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 159   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 160 am__uninstall_files_from_dir = { \
 161   test -z "$$files" \
 162     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 163     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 164          $(am__cd) "$$dir" && rm -f $$files; }; \
 165   }
 166 am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
 167 DATA = $(pkgconfig_DATA)
 168 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 169   distclean-recursive maintainer-clean-recursive
 170 am__recursive_targets = \
 171   $(RECURSIVE_TARGETS) \
 172   $(RECURSIVE_CLEAN_TARGETS) \
 173   $(am__extra_recursive_targets)
 174 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 175         cscope distdir dist dist-all distcheck
 176 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 177 # Read a list of newline-separated strings from the standard input,
 178 # and print each of them once, without duplicates.  Input order is
 179 # *not* preserved.
 180 am__uniquify_input = $(AWK) '\
 181   BEGIN { nonempty = 0; } \
 182   { items[$$0] = 1; nonempty = 1; } \
 183   END { if (nonempty) { for (i in items) print i; }; } \
 184 '
 185 # Make sure the list of sources is unique.  This is necessary because,
 186 # e.g., the same source file might be shared among _SOURCES variables
 187 # for different programs/libraries.
 188 am__define_uniq_tagged_files = \
 189   list='$(am__tagged_files)'; \
 190   unique=`for i in $$list; do \
 191     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 192   done | $(am__uniquify_input)`
 193 ETAGS = etags
 194 CTAGS = ctags
 195 CSCOPE = cscope
 196 DIST_SUBDIRS = $(SUBDIRS)
 197 am__DIST_COMMON = $(srcdir)/Makefile.in \
 198         $(srcdir)/libsodium-uninstalled.pc.in \
 199         $(srcdir)/libsodium.pc.in $(top_srcdir)/build-aux/compile \
 200         $(top_srcdir)/build-aux/config.guess \
 201         $(top_srcdir)/build-aux/config.sub \
 202         $(top_srcdir)/build-aux/install-sh \
 203         $(top_srcdir)/build-aux/ltmain.sh \
 204         $(top_srcdir)/build-aux/missing \
 205         $(top_srcdir)/src/libsodium/include/sodium/version.h.in \
 206         AUTHORS ChangeLog THANKS build-aux/compile \
 207         build-aux/config.guess build-aux/config.sub \
 208         build-aux/install-sh build-aux/ltmain.sh build-aux/missing \
 209         compile config.guess config.sub depcomp install-sh ltmain.sh \
 210         missing
 211 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 212 distdir = $(PACKAGE)-$(VERSION)
 213 top_distdir = $(distdir)
 214 am__remove_distdir = \
 215   if test -d "$(distdir)"; then \
 216     find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
 217       && rm -rf "$(distdir)" \
 218       || { sleep 5 && rm -rf "$(distdir)"; }; \
 219   else :; fi
 220 am__post_remove_distdir = $(am__remove_distdir)
 221 am__relativize = \
 222   dir0=`pwd`; \
 223   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 224   sed_rest='s,^[^/]*/*,,'; \
 225   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 226   sed_butlast='s,/*[^/]*$$,,'; \
 227   while test -n "$$dir1"; do \
 228     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 229     if test "$$first" != "."; then \
 230       if test "$$first" = ".."; then \
 231         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 232         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 233       else \
 234         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 235         if test "$$first2" = "$$first"; then \
 236           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 237         else \
 238           dir2="../$$dir2"; \
 239         fi; \
 240         dir0="$$dir0"/"$$first"; \
 241       fi; \
 242     fi; \
 243     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 244   done; \
 245   reldir="$$dir2"
 246 DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
 247 GZIP_ENV = --best
 248 DIST_TARGETS = dist-bzip2 dist-gzip
 249 distuninstallcheck_listfiles = find . -type f -print
 250 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
 251   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 252 distcleancheck_listfiles = find . -type f -print
 253 ACLOCAL = @ACLOCAL@
 254 AMTAR = @AMTAR@
 255 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 256 AR = @AR@
 257 AS = @AS@
 258 AUTOCONF = @AUTOCONF@
 259 AUTOHEADER = @AUTOHEADER@
 260 AUTOMAKE = @AUTOMAKE@
 261 AWK = @AWK@
 262 CC = @CC@
 263 CCAS = @CCAS@
 264 CCASDEPMODE = @CCASDEPMODE@
 265 CCASFLAGS = @CCASFLAGS@
 266 CCDEPMODE = @CCDEPMODE@
 267 CFLAGS = @CFLAGS@
 268 CFLAGS_AESNI = @CFLAGS_AESNI@
 269 CFLAGS_AVX = @CFLAGS_AVX@
 270 CFLAGS_AVX2 = @CFLAGS_AVX2@
 271 CFLAGS_MMX = @CFLAGS_MMX@
 272 CFLAGS_PCLMUL = @CFLAGS_PCLMUL@
 273 CFLAGS_SSE2 = @CFLAGS_SSE2@
 274 CFLAGS_SSE3 = @CFLAGS_SSE3@
 275 CFLAGS_SSE41 = @CFLAGS_SSE41@
 276 CFLAGS_SSSE3 = @CFLAGS_SSSE3@
 277 CPP = @CPP@
 278 CPPFLAGS = @CPPFLAGS@
 279 CWFLAGS = @CWFLAGS@
 280 CYGPATH_W = @CYGPATH_W@
 281 DEFS = @DEFS@
 282 DEPDIR = @DEPDIR@
 283 DLLTOOL = @DLLTOOL@
 284 DLL_VERSION = @DLL_VERSION@
 285 DSYMUTIL = @DSYMUTIL@
 286 DUMPBIN = @DUMPBIN@
 287 ECHO_C = @ECHO_C@
 288 ECHO_N = @ECHO_N@
 289 ECHO_T = @ECHO_T@
 290 EGREP = @EGREP@
 291 EXEEXT = @EXEEXT@
 292 FGREP = @FGREP@
 293 GREP = @GREP@
 294 HAVE_AMD64_ASM_V = @HAVE_AMD64_ASM_V@
 295 HAVE_AVX_ASM_V = @HAVE_AVX_ASM_V@
 296 HAVE_CPUID_V = @HAVE_CPUID_V@
 297 HAVE_TI_MODE_V = @HAVE_TI_MODE_V@
 298 INSTALL = @INSTALL@
 299 INSTALL_DATA = @INSTALL_DATA@
 300 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 301 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 302 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 303 ISODATE = @ISODATE@
 304 LD = @LD@
 305 LDFLAGS = @LDFLAGS@
 306 LIBOBJS = @LIBOBJS@
 307 LIBS = @LIBS@
 308 LIBTOOL = @LIBTOOL@
 309 LIBTOOL_DEPS = @LIBTOOL_DEPS@
 310 LIBTOOL_EXTRA_FLAGS = @LIBTOOL_EXTRA_FLAGS@
 311 LIPO = @LIPO@
 312 LN_S = @LN_S@
 313 LTLIBOBJS = @LTLIBOBJS@
 314 LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 315 MAINT = @MAINT@
 316 MAKEINFO = @MAKEINFO@
 317 MANIFEST_TOOL = @MANIFEST_TOOL@
 318 MKDIR_P = @MKDIR_P@
 319 NM = @NM@
 320 NMEDIT = @NMEDIT@
 321 OBJDUMP = @OBJDUMP@
 322 OBJEXT = @OBJEXT@
 323 OTOOL = @OTOOL@
 324 OTOOL64 = @OTOOL64@
 325 PACKAGE = @PACKAGE@
 326 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 327 PACKAGE_NAME = @PACKAGE_NAME@
 328 PACKAGE_STRING = @PACKAGE_STRING@
 329 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 330 PACKAGE_URL = @PACKAGE_URL@
 331 PACKAGE_VERSION = @PACKAGE_VERSION@
 332 PATH_SEPARATOR = @PATH_SEPARATOR@
 333 PTHREAD_CC = @PTHREAD_CC@
 334 PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
 335 PTHREAD_LIBS = @PTHREAD_LIBS@
 336 RANLIB = @RANLIB@
 337 SAFECODE_HOME = @SAFECODE_HOME@
 338 SED = @SED@
 339 SET_MAKE = @SET_MAKE@
 340 SHELL = @SHELL@
 341 SODIUM_LIBRARY_MINIMAL_DEF = @SODIUM_LIBRARY_MINIMAL_DEF@
 342 SODIUM_LIBRARY_VERSION = @SODIUM_LIBRARY_VERSION@
 343 SODIUM_LIBRARY_VERSION_MAJOR = @SODIUM_LIBRARY_VERSION_MAJOR@
 344 SODIUM_LIBRARY_VERSION_MINOR = @SODIUM_LIBRARY_VERSION_MINOR@
 345 STRIP = @STRIP@
 346 TEST_LDFLAGS = @TEST_LDFLAGS@
 347 VALGRIND = @VALGRIND@
 348 VALGRIND_ENABLED = @VALGRIND_ENABLED@
 349 VALGRIND_HAVE_TOOL_drd = @VALGRIND_HAVE_TOOL_drd@
 350 VALGRIND_HAVE_TOOL_exp_sgcheck = @VALGRIND_HAVE_TOOL_exp_sgcheck@
 351 VALGRIND_HAVE_TOOL_helgrind = @VALGRIND_HAVE_TOOL_helgrind@
 352 VALGRIND_HAVE_TOOL_memcheck = @VALGRIND_HAVE_TOOL_memcheck@
 353 VERSION = @VERSION@
 354 abs_builddir = @abs_builddir@
 355 abs_srcdir = @abs_srcdir@
 356 abs_top_builddir = @abs_top_builddir@
 357 abs_top_srcdir = @abs_top_srcdir@
 358 ac_ct_AR = @ac_ct_AR@
 359 ac_ct_CC = @ac_ct_CC@
 360 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 361 am__include = @am__include@
 362 am__leading_dot = @am__leading_dot@
 363 am__quote = @am__quote@
 364 am__tar = @am__tar@
 365 am__untar = @am__untar@
 366 ax_pthread_config = @ax_pthread_config@
 367 bindir = @bindir@
 368 build = @build@
 369 build_alias = @build_alias@
 370 build_cpu = @build_cpu@
 371 build_os = @build_os@
 372 build_vendor = @build_vendor@
 373 builddir = @builddir@
 374 datadir = @datadir@
 375 datarootdir = @datarootdir@
 376 docdir = @docdir@
 377 dvidir = @dvidir@
 378 exec_prefix = @exec_prefix@
 379 host = @host@
 380 host_alias = @host_alias@
 381 host_cpu = @host_cpu@
 382 host_os = @host_os@
 383 host_vendor = @host_vendor@
 384 htmldir = @htmldir@
 385 includedir = @includedir@
 386 infodir = @infodir@
 387 install_sh = @install_sh@
 388 libdir = @libdir@
 389 libexecdir = @libexecdir@
 390 localedir = @localedir@
 391 localstatedir = @localstatedir@
 392 mandir = @mandir@
 393 mkdir_p = @mkdir_p@
 394 oldincludedir = @oldincludedir@
 395 pdfdir = @pdfdir@
 396 prefix = @prefix@
 397 program_transform_name = @program_transform_name@
 398 psdir = @psdir@
 399 sbindir = @sbindir@
 400 sharedstatedir = @sharedstatedir@
 401 srcdir = @srcdir@
 402 sysconfdir = @sysconfdir@
 403 target_alias = @target_alias@
 404 top_build_prefix = @top_build_prefix@
 405 top_builddir = @top_builddir@
 406 top_srcdir = @top_srcdir@
 407 ACLOCAL_AMFLAGS = -I m4
 408 EXTRA_DIST = \
 409         autogen.sh \
 410         libsodium.sln \
 411         libsodium.vcxproj \
 412         libsodium.vcxproj.filters \
 413         LICENSE \
 414         README.markdown \
 415         THANKS
 416
 417 SUBDIRS = \
 418         contrib \
 419         dist-build \
 420         msvc-scripts \
 421         src \
 422         test
 423
 424 pkgconfigdir = $(libdir)/pkgconfig
 425 pkgconfig_DATA = @PACKAGE_NAME@.pc
 426 DISTCLEANFILES = $(pkgconfig_DATA)
 427 all: all-recursive
 428
 429 .SUFFIXES:
 430 am--refresh: Makefile
 431         @:
 432 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 433         @for dep in $?; do \
 434           case '$(am__configure_deps)' in \
 435             *$$dep*) \
 436               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
 437               $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 438                 && exit 0; \
 439               exit 1;; \
 440           esac; \
 441         done; \
 442         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
 443         $(am__cd) $(top_srcdir) && \
 444           $(AUTOMAKE) --foreign Makefile
 445 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 446         @case '$?' in \
 447           *config.status*) \
 448             echo ' $(SHELL) ./config.status'; \
 449             $(SHELL) ./config.status;; \
 450           *) \
 451             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 452             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 453         esac;
 454
 455 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 456         $(SHELL) ./config.status --recheck
 457
 458 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 459         $(am__cd) $(srcdir) && $(AUTOCONF)
 460 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 461         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 462 $(am__aclocal_m4_deps):
 463 libsodium.pc: $(top_builddir)/config.status $(srcdir)/libsodium.pc.in
 464         cd $(top_builddir) && $(SHELL) ./config.status $@
 465 libsodium-uninstalled.pc: $(top_builddir)/config.status $(srcdir)/libsodium-uninstalled.pc.in
 466         cd $(top_builddir) && $(SHELL) ./config.status $@
 467 src/libsodium/include/sodium/version.h: $(top_builddir)/config.status $(top_srcdir)/src/libsodium/include/sodium/version.h.in
 468         cd $(top_builddir) && $(SHELL) ./config.status $@
 469
 470 mostlyclean-libtool:
 471         -rm -f *.lo
 472
 473 clean-libtool:
 474         -rm -rf .libs _libs
 475
 476 distclean-libtool:
 477         -rm -f libtool config.lt
 478 install-pkgconfigDATA: $(pkgconfig_DATA)
 479         @$(NORMAL_INSTALL)
 480         @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
 481         if test -n "$$list"; then \
 482           echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
 483           $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
 484         fi; \
 485         for p in $$list; do \
 486           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 487           echo "$$d$$p"; \
 488         done | $(am__base_list) | \
 489         while read files; do \
 490           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
 491           $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
 492         done
 493
 494 uninstall-pkgconfigDATA:
 495         @$(NORMAL_UNINSTALL)
 496         @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
 497         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 498         dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
 499
 500 # This directory's subdirectories are mostly independent; you can cd
 501 # into them and run 'make' without going through this Makefile.
 502 # To change the values of 'make' variables: instead of editing Makefiles,
 503 # (1) if the variable is set in 'config.status', edit 'config.status'
 504 #     (which will cause the Makefiles to be regenerated when you run 'make');
 505 # (2) otherwise, pass the desired values on the 'make' command line.
 506 $(am__recursive_targets):
 507         @fail=; \
 508         if $(am__make_keepgoing); then \
 509           failcom='fail=yes'; \
 510         else \
 511           failcom='exit 1'; \
 512         fi; \
 513         dot_seen=no; \
 514         target=`echo $@ | sed s/-recursive//`; \
 515         case "$@" in \
 516           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 517           *) list='$(SUBDIRS)' ;; \
 518         esac; \
 519         for subdir in $$list; do \
 520           echo "Making $$target in $$subdir"; \
 521           if test "$$subdir" = "."; then \
 522             dot_seen=yes; \
 523             local_target="$$target-am"; \
 524           else \
 525             local_target="$$target"; \
 526           fi; \
 527           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 528           || eval $$failcom; \
 529         done; \
 530         if test "$$dot_seen" = "no"; then \
 531           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 532         fi; test -z "$$fail"
 533
 534 ID: $(am__tagged_files)
 535         $(am__define_uniq_tagged_files); mkid -fID $$unique
 536 tags: tags-recursive
 537 TAGS: tags
 538
 539 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 540         set x; \
 541         here=`pwd`; \
 542         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 543           include_option=--etags-include; \
 544           empty_fix=.; \
 545         else \
 546           include_option=--include; \
 547           empty_fix=; \
 548         fi; \
 549         list='$(SUBDIRS)'; for subdir in $$list; do \
 550           if test "$$subdir" = .; then :; else \
 551             test ! -f $$subdir/TAGS || \
 552               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 553           fi; \
 554         done; \
 555         $(am__define_uniq_tagged_files); \
 556         shift; \
 557         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 558           test -n "$$unique" || unique=$$empty_fix; \
 559           if test $$# -gt 0; then \
 560             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 561               "$$@" $$unique; \
 562           else \
 563             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 564               $$unique; \
 565           fi; \
 566         fi
 567 ctags: ctags-recursive
 568
 569 CTAGS: ctags
 570 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 571         $(am__define_uniq_tagged_files); \
 572         test -z "$(CTAGS_ARGS)$$unique" \
 573           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 574              $$unique
 575
 576 GTAGS:
 577         here=`$(am__cd) $(top_builddir) && pwd` \
 578           && $(am__cd) $(top_srcdir) \
 579           && gtags -i $(GTAGS_ARGS) "$$here"
 580 cscope: cscope.files
 581         test ! -s cscope.files \
 582           || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
 583 clean-cscope:
 584         -rm -f cscope.files
 585 cscope.files: clean-cscope cscopelist
 586 cscopelist: cscopelist-recursive
 587
 588 cscopelist-am: $(am__tagged_files)
 589         list='$(am__tagged_files)'; \
 590         case "$(srcdir)" in \
 591           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 592           *) sdir=$(subdir)/$(srcdir) ;; \
 593         esac; \
 594         for i in $$list; do \
 595           if test -f "$$i"; then \
 596             echo "$(subdir)/$$i"; \
 597           else \
 598             echo "$$sdir/$$i"; \
 599           fi; \
 600         done >> $(top_builddir)/cscope.files
 601
 602 distclean-tags:
 603         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 604         -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 605
 606 distdir: $(DISTFILES)
 607         $(am__remove_distdir)
 608         test -d "$(distdir)" || mkdir "$(distdir)"
 609         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 610         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 611         list='$(DISTFILES)'; \
 612           dist_files=`for file in $$list; do echo $$file; done | \
 613           sed -e "s|^$$srcdirstrip/||;t" \
 614               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 615         case $$dist_files in \
 616           */*) $(MKDIR_P) `echo "$$dist_files" | \
 617                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 618                            sort -u` ;; \
 619         esac; \
 620         for file in $$dist_files; do \
 621           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 622           if test -d $$d/$$file; then \
 623             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 624             if test -d "$(distdir)/$$file"; then \
 625               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 626             fi; \
 627             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 628               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 629               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 630             fi; \
 631             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 632           else \
 633             test -f "$(distdir)/$$file" \
 634             || cp -p $$d/$$file "$(distdir)/$$file" \
 635             || exit 1; \
 636           fi; \
 637         done
 638         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 639           if test "$$subdir" = .; then :; else \
 640             $(am__make_dryrun) \
 641               || test -d "$(distdir)/$$subdir" \
 642               || $(MKDIR_P) "$(distdir)/$$subdir" \
 643               || exit 1; \
 644             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 645             $(am__relativize); \
 646             new_distdir=$$reldir; \
 647             dir1=$$subdir; dir2="$(top_distdir)"; \
 648             $(am__relativize); \
 649             new_top_distdir=$$reldir; \
 650             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 651             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 652             ($(am__cd) $$subdir && \
 653               $(MAKE) $(AM_MAKEFLAGS) \
 654                 top_distdir="$$new_top_distdir" \
 655                 distdir="$$new_distdir" \
 656                 am__remove_distdir=: \
 657                 am__skip_length_check=: \
 658                 am__skip_mode_fix=: \
 659                 distdir) \
 660               || exit 1; \
 661           fi; \
 662         done
 663         -test -n "$(am__skip_mode_fix)" \
 664         || find "$(distdir)" -type d ! -perm -755 \
 665                 -exec chmod u+rwx,go+rx {} \; -o \
 666           ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 667           ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 668           ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 669         || chmod -R a+r "$(distdir)"
 670 dist-gzip: distdir
 671         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 672         $(am__post_remove_distdir)
 673 dist-bzip2: distdir
 674         tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
 675         $(am__post_remove_distdir)
 676
 677 dist-lzip: distdir
 678         tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
 679         $(am__post_remove_distdir)
 680
 681 dist-xz: distdir
 682         tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 683         $(am__post_remove_distdir)
 684
 685 dist-tarZ: distdir
 686         @echo WARNING: "Support for distribution archives compressed with" \
 687                        "legacy program 'compress' is deprecated." >&2
 688         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 689         tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 690         $(am__post_remove_distdir)
 691
 692 dist-shar: distdir
 693         @echo WARNING: "Support for shar distribution archives is" \
 694                        "deprecated." >&2
 695         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 696         shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
 697         $(am__post_remove_distdir)
 698
 699 dist-zip: distdir
 700         -rm -f $(distdir).zip
 701         zip -rq $(distdir).zip $(distdir)
 702         $(am__post_remove_distdir)
 703
 704 dist dist-all:
 705         $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
 706         $(am__post_remove_distdir)
 707
 708 # This target untars the dist file and tries a VPATH configuration.  Then
 709 # it guarantees that the distribution is self-contained by making another
 710 # tarfile.
 711 distcheck: dist
 712         case '$(DIST_ARCHIVES)' in \
 713         *.tar.gz*) \
 714           GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 715         *.tar.bz2*) \
 716           bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 717         *.tar.lz*) \
 718           lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 719         *.tar.xz*) \
 720           xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 721         *.tar.Z*) \
 722           uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 723         *.shar.gz*) \
 724           GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
 725         *.zip*) \
 726           unzip $(distdir).zip ;;\
 727         esac
 728         chmod -R a-w $(distdir)
 729         chmod u+w $(distdir)
 730         mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
 731         chmod a-w $(distdir)
 732         test -d $(distdir)/_build || exit 0; \
 733         dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 734           && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 735           && am__cwd=`pwd` \
 736           && $(am__cd) $(distdir)/_build/sub \
 737           && ../../configure \
 738             $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 739             $(DISTCHECK_CONFIGURE_FLAGS) \
 740             --srcdir=../.. --prefix="$$dc_install_base" \
 741           && $(MAKE) $(AM_MAKEFLAGS) \
 742           && $(MAKE) $(AM_MAKEFLAGS) dvi \
 743           && $(MAKE) $(AM_MAKEFLAGS) check \
 744           && $(MAKE) $(AM_MAKEFLAGS) install \
 745           && $(MAKE) $(AM_MAKEFLAGS) installcheck \
 746           && $(MAKE) $(AM_MAKEFLAGS) uninstall \
 747           && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
 748                 distuninstallcheck \
 749           && chmod -R a-w "$$dc_install_base" \
 750           && ({ \
 751                (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
 752                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
 753                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
 754                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
 755                     distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
 756               } || { rm -rf "$$dc_destdir"; exit 1; }) \
 757           && rm -rf "$$dc_destdir" \
 758           && $(MAKE) $(AM_MAKEFLAGS) dist \
 759           && rm -rf $(DIST_ARCHIVES) \
 760           && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 761           && cd "$$am__cwd" \
 762           || exit 1
 763         $(am__post_remove_distdir)
 764         @(echo "$(distdir) archives ready for distribution: "; \
 765           list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 766           sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 767 distuninstallcheck:
 768         @test -n '$(distuninstallcheck_dir)' || { \
 769           echo 'ERROR: trying to run $@ with an empty' \
 770                '$$(distuninstallcheck_dir)' >&2; \
 771           exit 1; \
 772         }; \
 773         $(am__cd) '$(distuninstallcheck_dir)' || { \
 774           echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
 775           exit 1; \
 776         }; \
 777         test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 778            || { echo "ERROR: files left after uninstall:" ; \
 779                 if test -n "$(DESTDIR)"; then \
 780                   echo "  (check DESTDIR support)"; \
 781                 fi ; \
 782                 $(distuninstallcheck_listfiles) ; \
 783                 exit 1; } >&2
 784 distcleancheck: distclean
 785         @if test '$(srcdir)' = . ; then \
 786           echo "ERROR: distcleancheck can only run from a VPATH build" ; \
 787           exit 1 ; \
 788         fi
 789         @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
 790           || { echo "ERROR: files left in build directory after distclean:" ; \
 791                $(distcleancheck_listfiles) ; \
 792                exit 1; } >&2
 793 check-am: all-am
 794 check: check-recursive
 795 all-am: Makefile $(DATA)
 796 installdirs: installdirs-recursive
 797 installdirs-am:
 798         for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
 799           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 800         done
 801 install: install-recursive
 802 install-exec: install-exec-recursive
 803 install-data: install-data-recursive
 804 uninstall: uninstall-recursive
 805
 806 install-am: all-am
 807         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 808
 809 installcheck: installcheck-recursive
 810 install-strip:
 811         if test -z '$(STRIP)'; then \
 812           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 813             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 814               install; \
 815         else \
 816           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 817             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 818             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 819         fi
 820 mostlyclean-generic:
 821
 822 clean-generic:
 823
 824 distclean-generic:
 825         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 826         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 827         -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 828
 829 maintainer-clean-generic:
 830         @echo "This command is intended for maintainers to use"
 831         @echo "it deletes files that may require special tools to rebuild."
 832 clean: clean-recursive
 833
 834 clean-am: clean-generic clean-libtool mostlyclean-am
 835
 836 distclean: distclean-recursive
 837         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 838         -rm -f Makefile
 839 distclean-am: clean-am distclean-generic distclean-libtool \
 840         distclean-tags
 841
 842 dvi: dvi-recursive
 843
 844 dvi-am:
 845
 846 html: html-recursive
 847
 848 html-am:
 849
 850 info: info-recursive
 851
 852 info-am:
 853
 854 install-data-am: install-pkgconfigDATA
 855
 856 install-dvi: install-dvi-recursive
 857
 858 install-dvi-am:
 859
 860 install-exec-am:
 861
 862 install-html: install-html-recursive
 863
 864 install-html-am:
 865
 866 install-info: install-info-recursive
 867
 868 install-info-am:
 869
 870 install-man:
 871
 872 install-pdf: install-pdf-recursive
 873
 874 install-pdf-am:
 875
 876 install-ps: install-ps-recursive
 877
 878 install-ps-am:
 879
 880 installcheck-am:
 881
 882 maintainer-clean: maintainer-clean-recursive
 883         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 884         -rm -rf $(top_srcdir)/autom4te.cache
 885         -rm -f Makefile
 886 maintainer-clean-am: distclean-am maintainer-clean-generic
 887
 888 mostlyclean: mostlyclean-recursive
 889
 890 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 891
 892 pdf: pdf-recursive
 893
 894 pdf-am:
 895
 896 ps: ps-recursive
 897
 898 ps-am:
 899
 900 uninstall-am: uninstall-pkgconfigDATA
 901
 902 .MAKE: $(am__recursive_targets) install-am install-strip
 903
 904 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
 905         am--refresh check check-am clean clean-cscope clean-generic \
 906         clean-libtool cscope cscopelist-am ctags ctags-am dist \
 907         dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
 908         dist-xz dist-zip distcheck distclean distclean-generic \
 909         distclean-libtool distclean-tags distcleancheck distdir \
 910         distuninstallcheck dvi dvi-am html html-am info info-am \
 911         install install-am install-data install-data-am install-dvi \
 912         install-dvi-am install-exec install-exec-am install-html \
 913         install-html-am install-info install-info-am install-man \
 914         install-pdf install-pdf-am install-pkgconfigDATA install-ps \
 915         install-ps-am install-strip installcheck installcheck-am \
 916         installdirs installdirs-am maintainer-clean \
 917         maintainer-clean-generic mostlyclean mostlyclean-generic \
 918         mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
 919         uninstall-am uninstall-pkgconfigDATA
 920
 921 .PRECIOUS: Makefile
 922
 923
 924 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 925 # Otherwise a system limit (for SysV at least) may be exceeded.
 926 .NOEXPORT: