4 #include <linux/types.h>
7 * Command Header sizes for IOCTL commands
10 #define HDIO_DRIVE_CMD_HDR_SIZE (4 * sizeof(__u8))
11 #define HDIO_DRIVE_HOB_HDR_SIZE (8 * sizeof(__u8))
12 #define HDIO_DRIVE_TASK_HDR_SIZE (8 * sizeof(__u8))
14 #define IDE_DRIVE_TASK_NO_DATA 0
15 #define IDE_DRIVE_TASK_INVALID -1
16 #define IDE_DRIVE_TASK_SET_XFER 1
17 #define IDE_DRIVE_TASK_IN 2
18 #define IDE_DRIVE_TASK_OUT 3
19 #define IDE_DRIVE_TASK_RAW_WRITE 4
22 * Define standard taskfile in/out register
24 #define IDE_TASKFILE_STD_IN_FLAGS 0xFE
25 #define IDE_HOB_STD_IN_FLAGS 0x3C
26 #define IDE_TASKFILE_STD_OUT_FLAGS 0xFE
27 #define IDE_HOB_STD_OUT_FLAGS 0x3C
29 typedef unsigned char task_ioreg_t
;
30 typedef unsigned long sata_ioreg_t
;
32 typedef union ide_reg_valid_s
{
36 unsigned error_feature
: 1;
42 unsigned status_command
: 1;
44 unsigned data_hob
: 1;
45 unsigned error_feature_hob
: 1;
46 unsigned sector_hob
: 1;
47 unsigned nsector_hob
: 1;
48 unsigned lcyl_hob
: 1;
49 unsigned hcyl_hob
: 1;
50 unsigned select_hob
: 1;
51 unsigned control_hob
: 1;
55 typedef struct ide_task_request_s
{
57 __u8 hob_ports
[8]; /* bytes 6 and 7 are unused */
58 ide_reg_valid_t out_flags
;
59 ide_reg_valid_t in_flags
;
62 unsigned long out_size
;
63 unsigned long in_size
;
66 typedef struct ide_ioctl_request_s
{
67 ide_task_request_t
*task_request
;
68 unsigned char *out_buffer
;
69 unsigned char *in_buffer
;
70 } ide_ioctl_request_t
;
72 struct hd_drive_cmd_hdr
{
79 typedef struct hd_drive_task_hdr
{
90 typedef struct hd_drive_hob_hdr
{
101 #define TASKFILE_NO_DATA 0x0000
103 #define TASKFILE_IN 0x0001
104 #define TASKFILE_MULTI_IN 0x0002
106 #define TASKFILE_OUT 0x0004
107 #define TASKFILE_MULTI_OUT 0x0008
108 #define TASKFILE_IN_OUT 0x0010
110 #define TASKFILE_IN_DMA 0x0020
111 #define TASKFILE_OUT_DMA 0x0040
112 #define TASKFILE_IN_DMAQ 0x0080
113 #define TASKFILE_OUT_DMAQ 0x0100
115 #define TASKFILE_P_IN 0x0200
116 #define TASKFILE_P_OUT 0x0400
117 #define TASKFILE_P_IN_DMA 0x0800
118 #define TASKFILE_P_OUT_DMA 0x1000
119 #define TASKFILE_P_IN_DMAQ 0x2000
120 #define TASKFILE_P_OUT_DMAQ 0x4000
121 #define TASKFILE_48 0x8000
122 #define TASKFILE_INVALID 0x7fff
124 /* ATA/ATAPI Commands pre T13 Spec */
127 * 0x01->0x02 Reserved
129 #define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */
131 * 0x04->0x07 Reserved
133 #define WIN_SRST 0x08 /* ATAPI soft reset command */
134 #define WIN_DEVICE_RESET 0x08
136 * 0x09->0x0F Reserved
138 #define WIN_RECAL 0x10
139 #define WIN_RESTORE WIN_RECAL
141 * 0x10->0x1F Reserved
143 #define WIN_READ 0x20 /* 28-Bit */
144 #define WIN_READ_ONCE 0x21 /* 28-Bit without retries */
145 #define WIN_READ_LONG 0x22 /* 28-Bit */
146 #define WIN_READ_LONG_ONCE 0x23 /* 28-Bit without retries */
147 #define WIN_READ_EXT 0x24 /* 48-Bit */
148 #define WIN_READDMA_EXT 0x25 /* 48-Bit */
149 #define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit */
150 #define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */
154 #define WIN_MULTREAD_EXT 0x29 /* 48-Bit */
156 * 0x2A->0x2F Reserved
158 #define WIN_WRITE 0x30 /* 28-Bit */
159 #define WIN_WRITE_ONCE 0x31 /* 28-Bit without retries */
160 #define WIN_WRITE_LONG 0x32 /* 28-Bit */
161 #define WIN_WRITE_LONG_ONCE 0x33 /* 28-Bit without retries */
162 #define WIN_WRITE_EXT 0x34 /* 48-Bit */
163 #define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */
164 #define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */
165 #define WIN_SET_MAX_EXT 0x37 /* 48-Bit */
166 #define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */
167 #define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */
169 * 0x3A->0x3B Reserved
171 #define WIN_WRITE_VERIFY 0x3C /* 28-Bit */
173 * 0x3D->0x3F Reserved
175 #define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */
176 #define WIN_VERIFY_ONCE 0x41 /* 28-Bit - without retries */
177 #define WIN_VERIFY_EXT 0x42 /* 48-Bit */
179 * 0x43->0x4F Reserved
181 #define WIN_FORMAT 0x50
183 * 0x51->0x5F Reserved
185 #define WIN_INIT 0x60
187 * 0x61->0x5F Reserved
189 #define WIN_SEEK 0x70 /* 0x70-0x7F Reserved */
191 #define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */
192 #define WIN_DIAGNOSE 0x90
193 #define WIN_SPECIFY 0x91 /* set drive geometry translation */
194 #define WIN_DOWNLOAD_MICROCODE 0x92
195 #define WIN_STANDBYNOW2 0x94
196 #define WIN_STANDBY2 0x96
197 #define WIN_SETIDLE2 0x97
198 #define WIN_CHECKPOWERMODE2 0x98
199 #define WIN_SLEEPNOW2 0x99
203 #define WIN_PACKETCMD 0xA0 /* Send a packet command. */
204 #define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */
205 #define WIN_QUEUED_SERVICE 0xA2
206 #define WIN_SMART 0xB0 /* self-monitoring and reporting */
207 #define CFA_ERASE_SECTORS 0xC0
208 #define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/
209 #define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */
210 #define WIN_SETMULT 0xC6 /* enable/disable multiple mode */
211 #define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers */
212 #define WIN_READDMA 0xC8 /* read sectors using DMA transfers */
213 #define WIN_READDMA_ONCE 0xC9 /* 28-Bit - without retries */
214 #define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */
215 #define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - without retries */
216 #define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers */
217 #define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */
218 #define WIN_GETMEDIASTATUS 0xDA
219 #define WIN_ACKMEDIACHANGE 0xDB /* ATA-1, ATA-2 vendor */
220 #define WIN_POSTBOOT 0xDC
221 #define WIN_PREBOOT 0xDD
222 #define WIN_DOORLOCK 0xDE /* lock door on removable drives */
223 #define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives */
224 #define WIN_STANDBYNOW1 0xE0
225 #define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */
226 #define WIN_STANDBY 0xE2 /* Set device in Standby Mode */
227 #define WIN_SETIDLE1 0xE3
228 #define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */
229 #define WIN_CHECKPOWERMODE1 0xE5
230 #define WIN_SLEEPNOW1 0xE6
231 #define WIN_FLUSH_CACHE 0xE7
232 #define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */
233 #define WIN_WRITE_SAME 0xE9 /* read ata-2 to use */
234 /* SET_FEATURES 0x22 or 0xDD */
235 #define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */
236 #define WIN_IDENTIFY 0xEC /* ask drive to identify itself */
237 #define WIN_MEDIAEJECT 0xED
238 #define WIN_IDENTIFY_DMA 0xEE /* same as WIN_IDENTIFY, but DMA */
239 #define WIN_SETFEATURES 0xEF /* set special drive features */
240 #define EXABYTE_ENABLE_NEST 0xF0
241 #define WIN_SECURITY_SET_PASS 0xF1
242 #define WIN_SECURITY_UNLOCK 0xF2
243 #define WIN_SECURITY_ERASE_PREPARE 0xF3
244 #define WIN_SECURITY_ERASE_UNIT 0xF4
245 #define WIN_SECURITY_FREEZE_LOCK 0xF5
246 #define WIN_SECURITY_DISABLE 0xF6
247 #define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */
248 #define WIN_SET_MAX 0xF9
249 #define DISABLE_SEAGATE 0xFB
251 /* WIN_SMART sub-commands */
253 #define SMART_READ_VALUES 0xD0
254 #define SMART_READ_THRESHOLDS 0xD1
255 #define SMART_AUTOSAVE 0xD2
256 #define SMART_SAVE 0xD3
257 #define SMART_IMMEDIATE_OFFLINE 0xD4
258 #define SMART_READ_LOG_SECTOR 0xD5
259 #define SMART_WRITE_LOG_SECTOR 0xD6
260 #define SMART_WRITE_THRESHOLDS 0xD7
261 #define SMART_ENABLE 0xD8
262 #define SMART_DISABLE 0xD9
263 #define SMART_STATUS 0xDA
264 #define SMART_AUTO_OFFLINE 0xDB
266 /* Password used in TF4 & TF5 executing SMART commands */
268 #define SMART_LCYL_PASS 0x4F
269 #define SMART_HCYL_PASS 0xC2
271 /* WIN_SETFEATURES sub-commands */
272 #define SETFEATURES_EN_8BIT 0x01 /* Enable 8-Bit Transfers */
273 #define SETFEATURES_EN_WCACHE 0x02 /* Enable write cache */
274 #define SETFEATURES_DIS_DEFECT 0x04 /* Disable Defect Management */
275 #define SETFEATURES_EN_APM 0x05 /* Enable advanced power management */
276 #define SETFEATURES_EN_SAME_R 0x22 /* for a region ATA-1 */
277 #define SETFEATURES_DIS_MSN 0x31 /* Disable Media Status Notification */
278 #define SETFEATURES_DIS_RETRY 0x33 /* Disable Retry */
279 #define SETFEATURES_EN_AAM 0x42 /* Enable Automatic Acoustic Management */
280 #define SETFEATURES_RW_LONG 0x44 /* Set Length of VS bytes */
281 #define SETFEATURES_SET_CACHE 0x54 /* Set Cache segments to SC Reg. Val */
282 #define SETFEATURES_DIS_RLA 0x55 /* Disable read look-ahead feature */
283 #define SETFEATURES_EN_RI 0x5D /* Enable release interrupt */
284 #define SETFEATURES_EN_SI 0x5E /* Enable SERVICE interrupt */
285 #define SETFEATURES_DIS_RPOD 0x66 /* Disable reverting to power on defaults */
286 #define SETFEATURES_DIS_ECC 0x77 /* Disable ECC byte count */
287 #define SETFEATURES_DIS_8BIT 0x81 /* Disable 8-Bit Transfers */
288 #define SETFEATURES_DIS_WCACHE 0x82 /* Disable write cache */
289 #define SETFEATURES_EN_DEFECT 0x84 /* Enable Defect Management */
290 #define SETFEATURES_DIS_APM 0x85 /* Disable advanced power management */
291 #define SETFEATURES_EN_ECC 0x88 /* Enable ECC byte count */
292 #define SETFEATURES_EN_MSN 0x95 /* Enable Media Status Notification */
293 #define SETFEATURES_EN_RETRY 0x99 /* Enable Retry */
294 #define SETFEATURES_EN_RLA 0xAA /* Enable read look-ahead feature */
295 #define SETFEATURES_PREFETCH 0xAB /* Sets drive prefetch value */
296 #define SETFEATURES_EN_REST 0xAC /* ATA-1 */
297 #define SETFEATURES_4B_RW_LONG 0xBB /* Set Length of 4 bytes */
298 #define SETFEATURES_DIS_AAM 0xC2 /* Disable Automatic Acoustic Management */
299 #define SETFEATURES_EN_RPOD 0xCC /* Enable reverting to power on defaults */
300 #define SETFEATURES_DIS_RI 0xDD /* Disable release interrupt ATAPI */
301 #define SETFEATURES_EN_SAME_M 0xDD /* for a entire device ATA-1 */
302 #define SETFEATURES_DIS_SI 0xDE /* Disable SERVICE interrupt ATAPI */
304 /* WIN_SECURITY sub-commands */
306 #define SECURITY_SET_PASSWORD 0xBA
307 #define SECURITY_UNLOCK 0xBB
308 #define SECURITY_ERASE_PREPARE 0xBC
309 #define SECURITY_ERASE_UNIT 0xBD
310 #define SECURITY_FREEZE_LOCK 0xBE
311 #define SECURITY_DISABLE_PASSWORD 0xBF
315 unsigned char sectors
;
316 unsigned short cylinders
;
320 /* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */
321 #define HDIO_GETGEO 0x0301 /* get device geometry */
322 #define HDIO_GET_UNMASKINTR 0x0302 /* get current unmask setting */
323 #define HDIO_GET_MULTCOUNT 0x0304 /* get current IDE blockmode setting */
324 #define HDIO_GET_QDMA 0x0305 /* get use-qdma flag */
326 #define HDIO_SET_XFER 0x0306 /* set transfer rate via proc */
328 #define HDIO_OBSOLETE_IDENTITY 0x0307 /* OBSOLETE, DO NOT USE: returns 142 bytes */
329 #define HDIO_GET_KEEPSETTINGS 0x0308 /* get keep-settings-on-reset flag */
330 #define HDIO_GET_32BIT 0x0309 /* get current io_32bit setting */
331 #define HDIO_GET_NOWERR 0x030a /* get ignore-write-error flag */
332 #define HDIO_GET_DMA 0x030b /* get use-dma flag */
333 #define HDIO_GET_NICE 0x030c /* get nice flags */
334 #define HDIO_GET_IDENTITY 0x030d /* get IDE identification info */
335 #define HDIO_GET_WCACHE 0x030e /* get write cache mode on|off */
336 #define HDIO_GET_ACOUSTIC 0x030f /* get acoustic value */
337 #define HDIO_GET_ADDRESS 0x0310 /* */
339 #define HDIO_GET_BUSSTATE 0x031a /* get the bus state of the hwif */
340 #define HDIO_TRISTATE_HWIF 0x031b /* execute a channel tristate */
341 #define HDIO_DRIVE_RESET 0x031c /* execute a device reset */
342 #define HDIO_DRIVE_TASKFILE 0x031d /* execute raw taskfile */
343 #define HDIO_DRIVE_TASK 0x031e /* execute task and special drive command */
344 #define HDIO_DRIVE_CMD 0x031f /* execute a special drive command */
345 #define HDIO_DRIVE_CMD_AEB HDIO_DRIVE_TASK
347 /* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */
348 #define HDIO_SET_MULTCOUNT 0x0321 /* change IDE blockmode */
349 #define HDIO_SET_UNMASKINTR 0x0322 /* permit other irqs during I/O */
350 #define HDIO_SET_KEEPSETTINGS 0x0323 /* keep ioctl settings on reset */
351 #define HDIO_SET_32BIT 0x0324 /* change io_32bit flags */
352 #define HDIO_SET_NOWERR 0x0325 /* change ignore-write-error flag */
353 #define HDIO_SET_DMA 0x0326 /* change use-dma flag */
354 #define HDIO_SET_PIO_MODE 0x0327 /* reconfig interface to new speed */
355 #define HDIO_SCAN_HWIF 0x0328 /* register and (re)scan interface */
356 #define HDIO_UNREGISTER_HWIF 0x032a /* unregister interface */
357 #define HDIO_SET_NICE 0x0329 /* set nice flags */
358 #define HDIO_SET_WCACHE 0x032b /* change write cache enable-disable */
359 #define HDIO_SET_ACOUSTIC 0x032c /* change acoustic behavior */
360 #define HDIO_SET_BUSSTATE 0x032d /* set the bus state of the hwif */
361 #define HDIO_SET_QDMA 0x032e /* change use-qdma flag */
362 #define HDIO_SET_ADDRESS 0x032f /* change lba addressing modes */
371 /* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x033n/0x033n */
372 /* 0x330 is reserved - used to be HDIO_GETGEO_BIG */
373 /* 0x331 is reserved - used to be HDIO_GETGEO_BIG_RAW */
374 /* 0x338 is reserved - used to be HDIO_SET_IDE_SCSI */
375 /* 0x339 is reserved - used to be HDIO_SET_SCSI_IDE */
377 #define __NEW_HD_DRIVE_ID
380 * Structure returned by HDIO_GET_IDENTITY, as per ANSI NCITS ATA6 rev.1b spec.
382 * If you change something here, please remember to update fix_driveid() in
386 unsigned short config
; /* lots of obsolete bit flags */
387 unsigned short cyls
; /* Obsolete, "physical" cyls */
388 unsigned short reserved2
; /* reserved (word 2) */
389 unsigned short heads
; /* Obsolete, "physical" heads */
390 unsigned short track_bytes
; /* unformatted bytes per track */
391 unsigned short sector_bytes
; /* unformatted bytes per sector */
392 unsigned short sectors
; /* Obsolete, "physical" sectors per track */
393 unsigned short vendor0
; /* vendor unique */
394 unsigned short vendor1
; /* vendor unique */
395 unsigned short vendor2
; /* Retired vendor unique */
396 unsigned char serial_no
[20]; /* 0 = not_specified */
397 unsigned short buf_type
; /* Retired */
398 unsigned short buf_size
; /* Retired, 512 byte increments
401 unsigned short ecc_bytes
; /* for r/w long cmds; 0 = not_specified */
402 unsigned char fw_rev
[8]; /* 0 = not_specified */
403 unsigned char model
[40]; /* 0 = not_specified */
404 unsigned char max_multsect
; /* 0=not_implemented */
405 unsigned char vendor3
; /* vendor unique */
406 unsigned short dword_io
; /* 0=not_implemented; 1=implemented */
407 unsigned char vendor4
; /* vendor unique */
408 unsigned char capability
; /* (upper byte of word 49)
414 unsigned short reserved50
; /* reserved (word 50) */
415 unsigned char vendor5
; /* Obsolete, vendor unique */
416 unsigned char tPIO
; /* Obsolete, 0=slow, 1=medium, 2=fast */
417 unsigned char vendor6
; /* Obsolete, vendor unique */
418 unsigned char tDMA
; /* Obsolete, 0=slow, 1=medium, 2=fast */
419 unsigned short field_valid
; /* (word 53)
420 * 2: ultra_ok word 88
421 * 1: eide_ok words 64-70
422 * 0: cur_ok words 54-58
424 unsigned short cur_cyls
; /* Obsolete, logical cylinders */
425 unsigned short cur_heads
; /* Obsolete, l heads */
426 unsigned short cur_sectors
; /* Obsolete, l sectors per track */
427 unsigned short cur_capacity0
; /* Obsolete, l total sectors on drive */
428 unsigned short cur_capacity1
; /* Obsolete, (2 words, misaligned int) */
429 unsigned char multsect
; /* current multiple sector count */
430 unsigned char multsect_valid
; /* when (bit0==1) multsect is ok */
431 unsigned int lba_capacity
; /* Obsolete, total number of sectors */
432 unsigned short dma_1word
; /* Obsolete, single-word dma info */
433 unsigned short dma_mword
; /* multiple-word dma info */
434 unsigned short eide_pio_modes
; /* bits 0:mode3 1:mode4 */
435 unsigned short eide_dma_min
; /* min mword dma cycle time (ns) */
436 unsigned short eide_dma_time
; /* recommended mword dma cycle time (ns) */
437 unsigned short eide_pio
; /* min cycle time (ns), no IORDY */
438 unsigned short eide_pio_iordy
; /* min cycle time (ns), with IORDY */
439 unsigned short words69_70
[2]; /* reserved words 69-70
440 * future command overlap and queuing
442 unsigned short words71_74
[4]; /* reserved words 71-74
443 * for IDENTIFY PACKET DEVICE command
445 unsigned short queue_depth
; /* (word 75)
447 * 4:0 Maximum queue depth -1
449 unsigned short words76_79
[4]; /* reserved words 76-79 */
450 unsigned short major_rev_num
; /* (word 80) */
451 unsigned short minor_rev_num
; /* (word 81) */
452 unsigned short command_set_1
; /* (word 82) supported
458 * 10: Host Protected Area
460 * 8: SERVICE Interrupt
461 * 7: Release Interrupt
465 * 3: Power Management Feature Set
466 * 2: Removable Feature Set
467 * 1: Security Feature Set
468 * 0: SMART Feature Set
470 unsigned short command_set_2
; /* (word 83)
473 * 13: FLUSH CACHE EXT
475 * 11: Device Configuration Overlay
476 * 10: 48-bit Address Feature Set
477 * 9: Automatic Acoustic Management
478 * 8: SET MAX security
479 * 7: reserved 1407DT PARTIES
480 * 6: SetF sub-command Power-Up
481 * 5: Power-Up in Standby Feature Set
482 * 4: Removable Media Notification
485 * 1: READ/WRITE DMA QUEUED
486 * 0: Download MicroCode
488 unsigned short cfsse
; /* (word 84)
489 * cmd set-feature supported extensions
493 * 5: General Purpose Logging
494 * 4: Streaming Feature Set
495 * 3: Media Card Pass Through
496 * 2: Media Serial Number Valid
497 * 1: SMART selt-test supported
498 * 0: SMART error logging
500 unsigned short cfs_enable_1
; /* (word 85)
501 * command set-feature enabled
507 * 10: Host Protected Area
509 * 8: SERVICE Interrupt
510 * 7: Release Interrupt
514 * 3: Power Management Feature Set
515 * 2: Removable Feature Set
516 * 1: Security Feature Set
517 * 0: SMART Feature Set
519 unsigned short cfs_enable_2
; /* (word 86)
520 * command set-feature enabled
523 * 13: FLUSH CACHE EXT
525 * 11: Device Configuration Overlay
526 * 10: 48-bit Address Feature Set
527 * 9: Automatic Acoustic Management
528 * 8: SET MAX security
529 * 7: reserved 1407DT PARTIES
530 * 6: SetF sub-command Power-Up
531 * 5: Power-Up in Standby Feature Set
532 * 4: Removable Media Notification
535 * 1: READ/WRITE DMA QUEUED
536 * 0: Download MicroCode
538 unsigned short csf_default
; /* (word 87)
539 * command set-feature default
543 * 5: General Purpose Logging enabled
544 * 4: Valid CONFIGURE STREAM executed
545 * 3: Media Card Pass Through enabled
546 * 2: Media Serial Number Valid
547 * 1: SMART selt-test supported
548 * 0: SMART error logging
550 unsigned short dma_ultra
; /* (word 88) */
551 unsigned short trseuc
; /* time required for security erase */
552 unsigned short trsEuc
; /* time required for enhanced erase */
553 unsigned short CurAPMvalues
; /* current APM values */
554 unsigned short mprc
; /* master password revision code */
555 unsigned short hw_config
; /* hardware config (word 93)
573 unsigned short acoustic
; /* (word 94)
574 * 15:8 Vendor's recommended value
577 unsigned short msrqs
; /* min stream request size */
578 unsigned short sxfert
; /* stream transfer time */
579 unsigned short sal
; /* stream access latency */
580 unsigned int spg
; /* stream performance granularity */
581 unsigned long long lba_capacity_2
;/* 48-bit total number of sectors */
582 unsigned short words104_125
[22];/* reserved words 104-125 */
583 unsigned short last_lun
; /* (word 126) */
584 unsigned short word127
; /* (word 127) Feature Set
585 * Removable Media Notification
587 * 1:0 00 = not supported
592 unsigned short dlf
; /* (word 128)
593 * device lock function
595 * 8 security level 1:max 0:high
604 unsigned short csfo
; /* (word 129)
605 * current set features options
612 unsigned short words130_155
[26];/* reserved vendor words 130-155 */
613 unsigned short word156
; /* reserved vendor word 156 */
614 unsigned short words157_159
[3];/* reserved vendor words 157-159 */
615 unsigned short cfa_power
; /* (word 160) CFA Power Mode
616 * 15 word 160 supported
622 unsigned short words161_175
[15];/* Reserved for CFA */
623 unsigned short words176_205
[30];/* Current Media Serial Number */
624 unsigned short words206_254
[49];/* reserved words 206-254 */
625 unsigned short integrity_word
; /* (word 255)
632 * IDE "nice" flags. These are used on a per drive basis to determine
633 * when to be nice and give more bandwidth to the other devices which
634 * share the same IDE bus.
636 #define IDE_NICE_DSC_OVERLAP (0) /* per the DSC overlap protocol */
637 #define IDE_NICE_ATAPI_OVERLAP (1) /* not supported yet */
638 #define IDE_NICE_1 (3) /* when probably won't affect us much */
639 #define IDE_NICE_0 (2) /* when sure that it won't affect us */
640 #define IDE_NICE_2 (4) /* when we know it's on our expense */
642 #endif /* _LINUX_HDREG_H */