release/src-rt-6.x.4708/shared/nvram/bcm95352gr.txt

   1 # bcm95352rg sdram board
   2 # $Copyright Open Broadcom Corporation$
   3 # $Id: bcm95352gr.txt,v 1.9 2010-12-23 05:37:37 dedelson Exp $
   4
   5 boardtype=0x0467
   6 boardnum=${serno}
   7 # Board revision 3.0
   8 boardrev=0x30
   9 # NO_EXTLNA, NOPCI, ENETVLAN, CCKHIPWR, ENETROBO, ADC.
  10 boardflags=0x758
  11 sromrev=2
  12
  13 # MIPS clock frequency in MHz
  14 clkfreq=200
  15
  16 # 16 MB SDR SDRAM (4 Meg x 16 x 2)
  17 sdram_init=0
  18 sdram_config=0x22
  19 sdram_refresh=0
  20 sdram_ncdl=0
  21
  22 # Integrated Ethernet switch
  23 et0macaddr=00:90:4c:91:${maclo}
  24 et0phyaddr=30
  25 et0mdcport=0
  26
  27 # single band d11 interface
  28 wl0id=0x4318
  29
  30 # 802.11g parameters
  31 il0macaddr=00:90:4c:92:${maclo}
  32 aa0=3
  33 ag0=2
  34 pa0maxpwr=72
  35 pa0itssit=62
  36 pa0b0=0x169f
  37 pa0b1=0xfa5e
  38 pa0b2=0xfe8a
  39 opo=12
  40
  41 # Commons wireless parameters
  42 wl0gpio2=0
  43 wl0gpio3=0
  44 cctl=0
  45 ccode=0
  46
  47 # Ethernet switch config (vlan0:LAN, vlan1:WAN)
  48 vlan0ports=1 2 3 4 5*
  49 vlan0hwname=et0
  50 vlan1ports=0 5u
  51
  52 # Bootloader and OS glue
  53 landevs=vlan0 wl0
  54 wandevs=et0
  55 lan_ipaddr=192.168.1.1
  56 lan_netmask=255.255.255.0
  57 boot_wait=on
  58 reset_gpio=7
  59
  60 # Watchdog timer in ms
  61 watchdog=3000
  62
  63 # SES parameters
  64 gpio13=ses_led
  65 gpio14=ses_button