release/src-rt-6.x.4708/shared/nvram/bcm95351bu_ddr.txt

   1 # BCM95351BU ddr board
   2 # $Copyright Open Broadcom Corporation$
   3 # $Id: bcm95351bu_ddr.txt,v 1.5 2005-11-17 01:36:54 vtruong Exp $
   4 boardtype=0x047a
   5 boardnum=${serno}
   6 # VLAN + ROBO
   7 boardflags=0x0110
   8 # Board revision 1.2
   9 boardrev=0x12
  10
  11 # MIPS clock frequency in MHz
  12 clkfreq=200
  13
  14 # 16 MB SDR SDRAM (4 Meg x 16 x 2)
  15 sdram_init=0x0009
  16 sdram_config=0x62
  17 sdram_refresh=0x0000
  18 sdram_ncdl=0
  19
  20 # Bootloader variables
  21 dl_ram_addr=a0001000
  22 os_ram_addr=80001000
  23 os_flash_addr=bfc40000
  24 lan_ipaddr=192.168.1.1
  25 lan_netmask=255.255.255.0
  26 scratch=a0180000
  27 boot_wait=on
  28 reset_gpio=3
  29
  30 # Watchdog timer in ms
  31 watchdog=3000
  32
  33 # Ethernet w/Robo switch
  34 et0macaddr=00:90:4c:9c:${maclo}
  35 et0phyaddr=30
  36 et0mdcport=0
  37
  38 # Robo switch config (vlan0:LAN, vlan1:WAN)
  39 vlan0ports=1 2 3 4 5*
  40 vlan0hwname=et0
  41 vlan1ports=0 5u
  42
  43 # Bootloader and OS glue
  44 landevs=vlan0 wl0 wl1
  45 wandevs=et0
  46
  47 # SES parameters
  48 gpio2=ses_button
  49
  50 #
  51 # --- on-chip d11 device ---
  52 #
  53 # 802.11g parameters
  54 sb/7/il0macaddr=00:90:4c:9d:${maclo}
  55 sb/7/aa0=1
  56 sb/7/ag0=255
  57 sb/7/pa0maxpwr=76
  58 sb/7/pa0itssit=62
  59 sb/7/pa0b0=0x15c8
  60 sb/7/pa0b1=0xfa80
  61 sb/7/pa0b2=0xfe65
  62 sb/7/opo=12
  63
  64 # LED GPIO assignments
  65 sb/7/wl0gpio2=0
  66
  67 # misc. parameters
  68 sb/7/ccode=0
  69
  70 #
  71 # --- off-chip d11 device ---
  72 #
  73 pci/1/1/sromrev=2
  74 # ALTIQ + HGPA + AB + CCK + AD
  75 pci/1/1/boardflags=0xa248
  76
  77 # LED GPIO assignments
  78 pci/1/1/wl0gpio0=2
  79 pci/1/1/wl0gpio1=0
  80 pci/1/1/wl0gpio2=4
  81
  82 # misc. parameters
  83 pci/1/1/ccode=0
  84