release/src-rt-6.x.4708/linux/linux-2.6.36/drivers/watchdog/iTCO_vendor_support.c

   1 /*
   2  *      intel TCO vendor specific watchdog driver support
   3  *
   4  *      (c) Copyright 2006-2009 Wim Van Sebroeck <wim@iguana.be>.
   5  *
   6  *      This program is free software; you can redistribute it and/or
   7  *      modify it under the terms of the GNU General Public License
   8  *      as published by the Free Software Foundation; either version
   9  *      2 of the License, or (at your option) any later version.
  10  *
  11  *      Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
  12  *      provide warranty for any of this software. This material is
  13  *      provided "AS-IS" and at no charge.
  14  */
  15
  16 /*
  17  *      Includes, defines, variables, module parameters, ...
  18  */
  19
  20 /* Module and version information */
  21 #define DRV_NAME        "iTCO_vendor_support"
  22 #define DRV_VERSION     "1.04"
  23 #define PFX             DRV_NAME ": "
  24
  25 /* Includes */
  26 #include <linux/module.h>               /* For module specific items */
  27 #include <linux/moduleparam.h>          /* For new moduleparam's */
  28 #include <linux/types.h>                /* For standard types (like size_t) */
  29 #include <linux/errno.h>                /* For the -ENODEV/... values */
  30 #include <linux/kernel.h>               /* For printk/panic/... */
  31 #include <linux/init.h>                 /* For __init/__exit/... */
  32 #include <linux/ioport.h>               /* For io-port access */
  33 #include <linux/io.h>                   /* For inb/outb/... */
  34
  35 #include "iTCO_vendor.h"
  36
  37 /* iTCO defines */
  38 #define SMI_EN          (acpibase + 0x30) /* SMI Control and Enable Register */
  39 #define TCOBASE         (acpibase + 0x60) /* TCO base address */
  40 #define TCO1_STS        (TCOBASE + 0x04)  /* TCO1 Status Register */
  41
  42 /* List of vendor support modes */
  43 /* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */
  44 #define SUPERMICRO_OLD_BOARD    1
  45 /* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */
  46 #define SUPERMICRO_NEW_BOARD    2
  47 /* Broken BIOS */
  48 #define BROKEN_BIOS             911
  49
  50 static int vendorsupport;
  51 module_param(vendorsupport, int, 0);
  52 MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default="
  53                         "0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+, "
  54                                                         "911=Broken SMI BIOS");
  55
  56 /*
  57  *      Vendor Specific Support
  58  */
  59
  60 /*
  61  *      Vendor Support: 1
  62  *      Board: Super Micro Computer Inc. 370SSE+-OEM1/P3TSSE
  63  *      iTCO chipset: ICH2
  64  *
  65  *      Code contributed by: R. Seretny <lkpatches@paypc.com>
  66  *      Documentation obtained by R. Seretny from SuperMicro Technical Support
  67  *
  68  *      To enable Watchdog function:
  69  *          BIOS setup -> Power -> TCO Logic SMI Enable -> Within5Minutes
  70  *          This setting enables SMI to clear the watchdog expired flag.
  71  *          If BIOS or CPU fail which may cause SMI hang, then system will
  72  *          reboot. When application starts to use watchdog function,
  73  *          application has to take over the control from SMI.
  74  *
  75  *          For P3TSSE, J36 jumper needs to be removed to enable the Watchdog
  76  *          function.
  77  *
  78  *          Note: The system will reboot when Expire Flag is set TWICE.
  79  *          So, if the watchdog timer is 20 seconds, then the maximum hang
  80  *          time is about 40 seconds, and the minimum hang time is about
  81  *          20.6 seconds.
  82  */
  83
  84 static void supermicro_old_pre_start(unsigned long acpibase)
  85 {
  86         unsigned long val32;
  87
  88         /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
  89         val32 = inl(SMI_EN);
  90         val32 &= 0xffffdfff;    /* Turn off SMI clearing watchdog */
  91         outl(val32, SMI_EN);    /* Needed to activate watchdog */
  92 }
  93
  94 static void supermicro_old_pre_stop(unsigned long acpibase)
  95 {
  96         unsigned long val32;
  97
  98         /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
  99         val32 = inl(SMI_EN);
 100         val32 |= 0x00002000;    /* Turn on SMI clearing watchdog */
 101         outl(val32, SMI_EN);    /* Needed to deactivate watchdog */
 102 }
 103
 104 /*
 105  *      Vendor Support: 2
 106  *      Board: Super Micro Computer Inc. P4SBx, P4DPx
 107  *      iTCO chipset: ICH4
 108  *
 109  *      Code contributed by: R. Seretny <lkpatches@paypc.com>
 110  *      Documentation obtained by R. Seretny from SuperMicro Technical Support
 111  *
 112  *      To enable Watchdog function:
 113  *       1. BIOS
 114  *        For P4SBx:
 115  *        BIOS setup -> Advanced -> Integrated Peripherals -> Watch Dog Feature
 116  *        For P4DPx:
 117  *        BIOS setup -> Advanced -> I/O Device Configuration -> Watch Dog
 118  *       This setting enables or disables Watchdog function. When enabled, the
 119  *       default watchdog timer is set to be 5 minutes (about 4m35s). It is
 120  *       enough to load and run the OS. The application (service or driver) has
 121  *       to take over the control once OS is running up and before watchdog
 122  *       expires.
 123  *
 124  *       2. JUMPER
 125  *        For P4SBx: JP39
 126  *        For P4DPx: JP37
 127  *        This jumper is used for safety.  Closed is enabled. This jumper
 128  *        prevents user enables watchdog in BIOS by accident.
 129  *
 130  *       To enable Watch Dog function, both BIOS and JUMPER must be enabled.
 131  *
 132  *      The documentation lists motherboards P4SBx and P4DPx series as of
 133  *      20-March-2002. However, this code works flawlessly with much newer
 134  *      motherboards, such as my X6DHR-8G2 (SuperServer 6014H-82).
 135  *
 136  *      The original iTCO driver as written does not actually reset the
 137  *      watchdog timer on these machines, as a result they reboot after five
 138  *      minutes.
 139  *
 140  *      NOTE: You may leave the Watchdog function disabled in the SuperMicro
 141  *      BIOS to avoid a "boot-race"... This driver will enable watchdog
 142  *      functionality even if it's disabled in the BIOS once the /dev/watchdog
 143  *      file is opened.
 144  */
 145
 146 /* I/O Port's */
 147 #define SM_REGINDEX     0x2e    /* SuperMicro ICH4+ Register Index */
 148 #define SM_DATAIO       0x2f    /* SuperMicro ICH4+ Register Data I/O */
 149
 150 /* Control Register's */
 151 #define SM_CTLPAGESW    0x07    /* SuperMicro ICH4+ Control Page Switch */
 152 #define SM_CTLPAGE      0x08    /* SuperMicro ICH4+ Control Page Num */
 153
 154 #define SM_WATCHENABLE  0x30    /* Watchdog enable: Bit 0: 0=off, 1=on */
 155
 156 #define SM_WATCHPAGE    0x87    /* Watchdog unlock control page */
 157
 158 #define SM_ENDWATCH     0xAA    /* Watchdog lock control page */
 159
 160 #define SM_COUNTMODE    0xf5    /* Watchdog count mode select */
 161                                 /* (Bit 3: 0 = seconds, 1 = minutes */
 162
 163 #define SM_WATCHTIMER   0xf6    /* 8-bits, Watchdog timer counter (RW) */
 164
 165 #define SM_RESETCONTROL 0xf7    /* Watchdog reset control */
 166                                 /* Bit 6: timer is reset by kbd interrupt */
 167                                 /* Bit 7: timer is reset by mouse interrupt */
 168
 169 static void supermicro_new_unlock_watchdog(void)
 170 {
 171         /* Write 0x87 to port 0x2e twice */
 172         outb(SM_WATCHPAGE, SM_REGINDEX);
 173         outb(SM_WATCHPAGE, SM_REGINDEX);
 174         /* Switch to watchdog control page */
 175         outb(SM_CTLPAGESW, SM_REGINDEX);
 176         outb(SM_CTLPAGE, SM_DATAIO);
 177 }
 178
 179 static void supermicro_new_lock_watchdog(void)
 180 {
 181         outb(SM_ENDWATCH, SM_REGINDEX);
 182 }
 183
 184 static void supermicro_new_pre_start(unsigned int heartbeat)
 185 {
 186         unsigned int val;
 187
 188         supermicro_new_unlock_watchdog();
 189
 190         /* Watchdog timer setting needs to be in seconds*/
 191         outb(SM_COUNTMODE, SM_REGINDEX);
 192         val = inb(SM_DATAIO);
 193         val &= 0xF7;
 194         outb(val, SM_DATAIO);
 195
 196         /* Write heartbeat interval to WDOG */
 197         outb(SM_WATCHTIMER, SM_REGINDEX);
 198         outb((heartbeat & 255), SM_DATAIO);
 199
 200         /* Make sure keyboard/mouse interrupts don't interfere */
 201         outb(SM_RESETCONTROL, SM_REGINDEX);
 202         val = inb(SM_DATAIO);
 203         val &= 0x3f;
 204         outb(val, SM_DATAIO);
 205
 206         /* enable watchdog by setting bit 0 of Watchdog Enable to 1 */
 207         outb(SM_WATCHENABLE, SM_REGINDEX);
 208         val = inb(SM_DATAIO);
 209         val |= 0x01;
 210         outb(val, SM_DATAIO);
 211
 212         supermicro_new_lock_watchdog();
 213 }
 214
 215 static void supermicro_new_pre_stop(void)
 216 {
 217         unsigned int val;
 218
 219         supermicro_new_unlock_watchdog();
 220
 221         /* disable watchdog by setting bit 0 of Watchdog Enable to 0 */
 222         outb(SM_WATCHENABLE, SM_REGINDEX);
 223         val = inb(SM_DATAIO);
 224         val &= 0xFE;
 225         outb(val, SM_DATAIO);
 226
 227         supermicro_new_lock_watchdog();
 228 }
 229
 230 static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat)
 231 {
 232         supermicro_new_unlock_watchdog();
 233
 234         /* reset watchdog timeout to heartveat value */
 235         outb(SM_WATCHTIMER, SM_REGINDEX);
 236         outb((heartbeat & 255), SM_DATAIO);
 237
 238         supermicro_new_lock_watchdog();
 239 }
 240
 241 /*
 242  *      Vendor Support: 911
 243  *      Board: Some Intel ICHx based motherboards
 244  *      iTCO chipset: ICH7+
 245  *
 246  *      Some Intel motherboards have a broken BIOS implementation: i.e.
 247  *      the SMI handler clear's the TIMEOUT bit in the TC01_STS register
 248  *      and does not reload the time. Thus the TCO watchdog does not reboot
 249  *      the system.
 250  *
 251  *      These are the conclusions of Andriy Gapon <avg@icyb.net.ua> after
 252  *      debugging: the SMI handler is quite simple - it tests value in
 253  *      TCO1_CNT against 0x800, i.e. checks TCO_TMR_HLT. If the bit is set
 254  *      the handler goes into an infinite loop, apparently to allow the
 255  *      second timeout and reboot. Otherwise it simply clears TIMEOUT bit
 256  *      in TCO1_STS and that's it.
 257  *      So the logic seems to be reversed, because it is hard to see how
 258  *      TIMEOUT can get set to 1 and SMI generated when TCO_TMR_HLT is set
 259  *      (other than a transitional effect).
 260  *
 261  *      The only fix found to get the motherboard(s) to reboot is to put
 262  *      the glb_smi_en bit to 0. This is a dirty hack that bypasses the
 263  *      broken code by disabling Global SMI.
 264  *
 265  *      WARNING: globally disabling SMI could possibly lead to dramatic
 266  *      problems, especially on laptops! I.e. various ACPI things where
 267  *      SMI is used for communication between OS and firmware.
 268  *
 269  *      Don't use this fix if you don't need to!!!
 270  */
 271
 272 static void broken_bios_start(unsigned long acpibase)
 273 {
 274         unsigned long val32;
 275
 276         val32 = inl(SMI_EN);
 277         /* Bit 13: TCO_EN     -> 0 = Disables TCO logic generating an SMI#
 278            Bit  0: GBL_SMI_EN -> 0 = No SMI# will be generated by ICH. */
 279         val32 &= 0xffffdffe;
 280         outl(val32, SMI_EN);
 281 }
 282
 283 static void broken_bios_stop(unsigned long acpibase)
 284 {
 285         unsigned long val32;
 286
 287         val32 = inl(SMI_EN);
 288         /* Bit 13: TCO_EN     -> 1 = Enables TCO logic generating an SMI#
 289            Bit  0: GBL_SMI_EN -> 1 = Turn global SMI on again. */
 290         val32 |= 0x00002001;
 291         outl(val32, SMI_EN);
 292 }
 293
 294 /*
 295  *      Generic Support Functions
 296  */
 297
 298 void iTCO_vendor_pre_start(unsigned long acpibase,
 299                            unsigned int heartbeat)
 300 {
 301         switch (vendorsupport) {
 302         case SUPERMICRO_OLD_BOARD:
 303                 supermicro_old_pre_start(acpibase);
 304                 break;
 305         case SUPERMICRO_NEW_BOARD:
 306                 supermicro_new_pre_start(heartbeat);
 307                 break;
 308         case BROKEN_BIOS:
 309                 broken_bios_start(acpibase);
 310                 break;
 311         }
 312 }
 313 EXPORT_SYMBOL(iTCO_vendor_pre_start);
 314
 315 void iTCO_vendor_pre_stop(unsigned long acpibase)
 316 {
 317         switch (vendorsupport) {
 318         case SUPERMICRO_OLD_BOARD:
 319                 supermicro_old_pre_stop(acpibase);
 320                 break;
 321         case SUPERMICRO_NEW_BOARD:
 322                 supermicro_new_pre_stop();
 323                 break;
 324         case BROKEN_BIOS:
 325                 broken_bios_stop(acpibase);
 326                 break;
 327         }
 328 }
 329 EXPORT_SYMBOL(iTCO_vendor_pre_stop);
 330
 331 void iTCO_vendor_pre_keepalive(unsigned long acpibase, unsigned int heartbeat)
 332 {
 333         if (vendorsupport == SUPERMICRO_NEW_BOARD)
 334                 supermicro_new_pre_set_heartbeat(heartbeat);
 335 }
 336 EXPORT_SYMBOL(iTCO_vendor_pre_keepalive);
 337
 338 void iTCO_vendor_pre_set_heartbeat(unsigned int heartbeat)
 339 {
 340         if (vendorsupport == SUPERMICRO_NEW_BOARD)
 341                 supermicro_new_pre_set_heartbeat(heartbeat);
 342 }
 343 EXPORT_SYMBOL(iTCO_vendor_pre_set_heartbeat);
 344
 345 int iTCO_vendor_check_noreboot_on(void)
 346 {
 347         switch (vendorsupport) {
 348         case SUPERMICRO_OLD_BOARD:
 349                 return 0;
 350         default:
 351                 return 1;
 352         }
 353 }
 354 EXPORT_SYMBOL(iTCO_vendor_check_noreboot_on);
 355
 356 static int __init iTCO_vendor_init_module(void)
 357 {
 358         printk(KERN_INFO PFX "vendor-support=%d\n", vendorsupport);
 359         return 0;
 360 }
 361
 362 static void __exit iTCO_vendor_exit_module(void)
 363 {
 364         printk(KERN_INFO PFX "Module Unloaded\n");
 365 }
 366
 367 module_init(iTCO_vendor_init_module);
 368 module_exit(iTCO_vendor_exit_module);
 369
 370 MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>, "
 371                 "R. Seretny <lkpatches@paypc.com>");
 372 MODULE_DESCRIPTION("Intel TCO Vendor Specific WatchDog Timer Driver Support");
 373 MODULE_VERSION(DRV_VERSION);
 374 MODULE_LICENSE("GPL");