GUI: Fix Tomato RAF theme for all builds. Compilation typo.
[tomato.git] / release / src-rt-6.x.4708 / linux / linux-2.6.36 / drivers / usb / storage / Kconfig
blob8a372bac0e435cf4d57e0a588904bb5d918347f5
2 # USB Storage driver configuration
5 comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
6 comment "also be needed; see USB_STORAGE Help for more info"
7         depends on USB
9 config USB_STORAGE
10         tristate "USB Mass Storage support"
11         depends on USB && SCSI
12         ---help---
13           Say Y here if you want to connect USB mass storage devices to your
14           computer's USB port. This is the driver you need for USB
15           floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
16           USB flash devices, and memory sticks, along with
17           similar devices. This driver may also be used for some cameras
18           and card readers.
20           This option depends on 'SCSI' support being enabled, but you
21           probably also need 'SCSI device support: SCSI disk support'
22           (BLK_DEV_SD) for most USB storage devices.
24           To compile this driver as a module, choose M here: the
25           module will be called usb-storage.
27 config USB_STORAGE_DEBUG
28         bool "USB Mass Storage verbose debug"
29         depends on USB_STORAGE
30         help
31           Say Y here in order to have the USB Mass Storage code generate
32           verbose debugging messages.
34 config USB_STORAGE_DATAFAB
35         tristate "Datafab Compact Flash Reader support"
36         depends on USB_STORAGE
37         help
38           Support for certain Datafab CompactFlash readers.
39           Datafab has a web page at <http://www.datafabusa.com/>.
41           If this driver is compiled as a module, it will be named ums-datafab.
43 config USB_STORAGE_FREECOM
44         tristate "Freecom USB/ATAPI Bridge support"
45         depends on USB_STORAGE
46         help
47           Support for the Freecom USB to IDE/ATAPI adaptor.
48           Freecom has a web page at <http://www.freecom.de/>.
50           If this driver is compiled as a module, it will be named ums-freecom.
52 config USB_STORAGE_ISD200
53         tristate "ISD-200 USB/ATA Bridge support"
54         depends on USB_STORAGE
55         ---help---
56           Say Y here if you want to use USB Mass Store devices based
57           on the In-Systems Design ISD-200 USB/ATA bridge.
59           Some of the products that use this chip are:
61           - Archos Jukebox 6000
62           - ISD SmartCable for Storage
63           - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
64           - Sony CRX10U CD-R/RW drive
65           - CyQ've CQ8060A CDRW drive
66           - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
68           If this driver is compiled as a module, it will be named ums-isd200.
70 config USB_STORAGE_USBAT
71         tristate "USBAT/USBAT02-based storage support"
72         depends on USB_STORAGE
73         help
74           Say Y here to include additional code to support storage devices
75           based on the SCM/Shuttle USBAT/USBAT02 processors.
77           Devices reported to work with this driver include:
78           - CompactFlash reader included with Kodak DC3800 camera
79           - Dane-Elec Zmate CompactFlash reader
80           - Delkin Efilm reader2
81           - HP 8200e/8210e/8230e CD-Writer Plus drives
82           - I-JAM JS-50U
83           - Jessops CompactFlash JESDCFRU BLACK
84           - Kingston Technology PCREAD-USB/CF
85           - Maxell UA4 CompactFlash reader
86           - Memorex UCF-100
87           - Microtech ZiO! ICS-45 CF2
88           - RCA LYRA MP3 portable
89           - Sandisk ImageMate SDDR-05b
91           If this driver is compiled as a module, it will be named ums-usbat.
93 config USB_STORAGE_SDDR09
94         tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
95         depends on USB_STORAGE
96         help
97           Say Y here to include additional code to support the Sandisk SDDR-09
98           SmartMedia reader in the USB Mass Storage driver.
99           Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
101           If this driver is compiled as a module, it will be named ums-sddr09.
103 config USB_STORAGE_SDDR55
104         tristate "SanDisk SDDR-55 SmartMedia support"
105         depends on USB_STORAGE
106         help
107           Say Y here to include additional code to support the Sandisk SDDR-55
108           SmartMedia reader in the USB Mass Storage driver.
110           If this driver is compiled as a module, it will be named ums-sddr55.
112 config USB_STORAGE_JUMPSHOT
113         tristate "Lexar Jumpshot Compact Flash Reader"
114         depends on USB_STORAGE
115         help
116           Say Y here to include additional code to support the Lexar Jumpshot
117           USB CompactFlash reader.
119           If this driver is compiled as a module, it will be named ums-jumpshot.
121 config USB_STORAGE_ALAUDA
122         tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
123         depends on USB_STORAGE
124         help
125           Say Y here to include additional code to support the Olympus MAUSB-10
126           and Fujifilm DPC-R1 USB Card reader/writer devices.
128           These devices are based on the Alauda chip and support both
129           XD and SmartMedia cards.
131           If this driver is compiled as a module, it will be named ums-alauda.
133 config USB_STORAGE_ONETOUCH
134         tristate "Support OneTouch Button on Maxtor Hard Drives"
135         depends on USB_STORAGE
136         depends on INPUT=y || INPUT=USB_STORAGE
137         help
138           Say Y here to include additional code to support the Maxtor OneTouch
139           USB hard drive's onetouch button.
141           This code registers the button on the front of Maxtor OneTouch USB
142           hard drive's as an input device. An action can be associated with
143           this input in any keybinding software. (e.g. gnome's keyboard short-
144           cuts)
146           If this driver is compiled as a module, it will be named ums-onetouch.
148 config USB_STORAGE_KARMA
149         tristate "Support for Rio Karma music player"
150         depends on USB_STORAGE
151         help
152           Say Y here to include additional code to support the Rio Karma
153           USB interface.
155           This code places the Rio Karma into mass storage mode, enabling
156           it to be mounted as an ordinary filesystem. Performing an eject
157           on the resulting scsi device node returns the Karma to normal
158           operation.
160           If this driver is compiled as a module, it will be named ums-karma.
162 config USB_STORAGE_CYPRESS_ATACB
163         tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
164         depends on USB_STORAGE
165         ---help---
166           Say Y here if you want to use SAT (ata pass through) on devices based
167           on the Cypress USB/ATA bridge supporting ATACB. This will allow you
168           to use tools to tune and monitor your drive (like hdparm or smartctl).
170           If you say no here your device will still work with the standard usb
171           mass storage class.
173           If this driver is compiled as a module, it will be named ums-cypress.
175 config USB_LIBUSUAL
176         bool "The shared table of common (or usual) storage devices"
177         depends on USB
178         help
179           This module contains a table of common (or usual) devices
180           for usb-storage and ub drivers, and allows to switch binding
181           of these devices without rebuilding modules.
183           Typical syntax of /etc/modprobe.conf is:
185                 options libusual bias="ub"
187           If unsure, say N.