release/src-rt-6.x.4708/linux/linux-2.6.36/drivers/usb/host/oxu210hp.h

   1 /*
   2  * Host interface registers
   3  */
   4
   5 #define OXU_DEVICEID                    0x00
   6         #define OXU_REV_MASK            0xffff0000
   7         #define OXU_REV_SHIFT           16
   8         #define OXU_REV_2100            0x2100
   9         #define OXU_BO_SHIFT            8
  10         #define OXU_BO_MASK             (0x3 << OXU_BO_SHIFT)
  11         #define OXU_MAJ_REV_SHIFT       4
  12         #define OXU_MAJ_REV_MASK        (0xf << OXU_MAJ_REV_SHIFT)
  13         #define OXU_MIN_REV_SHIFT       0
  14         #define OXU_MIN_REV_MASK        (0xf << OXU_MIN_REV_SHIFT)
  15 #define OXU_HOSTIFCONFIG                0x04
  16 #define OXU_SOFTRESET                   0x08
  17         #define OXU_SRESET              (1 << 0)
  18
  19 #define OXU_PIOBURSTREADCTRL            0x0C
  20
  21 #define OXU_CHIPIRQSTATUS               0x10
  22 #define OXU_CHIPIRQEN_SET               0x14
  23 #define OXU_CHIPIRQEN_CLR               0x18
  24         #define OXU_USBSPHLPWUI         0x00000080
  25         #define OXU_USBOTGLPWUI         0x00000040
  26         #define OXU_USBSPHI             0x00000002
  27         #define OXU_USBOTGI             0x00000001
  28
  29 #define OXU_CLKCTRL_SET                 0x1C
  30         #define OXU_SYSCLKEN            0x00000008
  31         #define OXU_USBSPHCLKEN         0x00000002
  32         #define OXU_USBOTGCLKEN         0x00000001
  33
  34 #define OXU_ASO                         0x68
  35         #define OXU_SPHPOEN             0x00000100
  36         #define OXU_OVRCCURPUPDEN       0x00000800
  37         #define OXU_ASO_OP              (1 << 10)
  38         #define OXU_COMPARATOR          0x000004000
  39
  40 #define OXU_USBMODE                     0x1A8
  41         #define OXU_VBPS                0x00000020
  42         #define OXU_ES_LITTLE           0x00000000
  43         #define OXU_CM_HOST_ONLY        0x00000003
  44
  45 /*
  46  * Proper EHCI structs & defines
  47  */
  48
  49 /* Magic numbers that can affect system performance */
  50 #define EHCI_TUNE_CERR          3       /* 0-3 qtd retries; 0 == don't stop */
  51 #define EHCI_TUNE_RL_HS         4       /* nak throttle; see 4.9 */
  52 #define EHCI_TUNE_RL_TT         0
  53 #define EHCI_TUNE_MULT_HS       1       /* 1-3 transactions/uframe; 4.10.3 */
  54 #define EHCI_TUNE_MULT_TT       1
  55 #define EHCI_TUNE_FLS           2       /* (small) 256 frame schedule */
  56
  57 struct oxu_hcd;
  58
  59 /* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
  60
  61 /* Section 2.2 Host Controller Capability Registers */
  62 struct ehci_caps {
  63         /* these fields are specified as 8 and 16 bit registers,
  64          * but some hosts can't perform 8 or 16 bit PCI accesses.
  65          */
  66         u32             hc_capbase;
  67 #define HC_LENGTH(p)            (((p)>>00)&0x00ff)      /* bits 7:0 */
  68 #define HC_VERSION(p)           (((p)>>16)&0xffff)      /* bits 31:16 */
  69         u32             hcs_params;     /* HCSPARAMS - offset 0x4 */
  70 #define HCS_DEBUG_PORT(p)       (((p)>>20)&0xf) /* bits 23:20, debug port? */
  71 #define HCS_INDICATOR(p)        ((p)&(1 << 16)) /* true: has port indicators */
  72 #define HCS_N_CC(p)             (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
  73 #define HCS_N_PCC(p)            (((p)>>8)&0xf)  /* bits 11:8, ports per CC */
  74 #define HCS_PORTROUTED(p)       ((p)&(1 << 7))  /* true: port routing */
  75 #define HCS_PPC(p)              ((p)&(1 << 4))  /* true: port power control */
  76 #define HCS_N_PORTS(p)          (((p)>>0)&0xf)  /* bits 3:0, ports on HC */
  77
  78         u32             hcc_params;      /* HCCPARAMS - offset 0x8 */
  79 #define HCC_EXT_CAPS(p)         (((p)>>8)&0xff) /* for pci extended caps */
  80 #define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
  81 #define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
  82 #define HCC_CANPARK(p)          ((p)&(1 << 2))  /* true: can park on async qh */
  83 #define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
  84 #define HCC_64BIT_ADDR(p)       ((p)&(1))       /* true: can use 64-bit addr */
  85         u8              portroute[8];    /* nibbles for routing - offset 0xC */
  86 } __attribute__ ((packed));
  87
  88
  89 /* Section 2.3 Host Controller Operational Registers */
  90 struct ehci_regs {
  91         /* USBCMD: offset 0x00 */
  92         u32             command;
  93 /* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
  94 #define CMD_PARK        (1<<11)         /* enable "park" on async qh */
  95 #define CMD_PARK_CNT(c) (((c)>>8)&3)    /* how many transfers to park for */
  96 #define CMD_LRESET      (1<<7)          /* partial reset (no ports, etc) */
  97 #define CMD_IAAD        (1<<6)          /* "doorbell" interrupt async advance */
  98 #define CMD_ASE         (1<<5)          /* async schedule enable */
  99 #define CMD_PSE         (1<<4)          /* periodic schedule enable */
 100 /* 3:2 is periodic frame list size */
 101 #define CMD_RESET       (1<<1)          /* reset HC not bus */
 102 #define CMD_RUN         (1<<0)          /* start/stop HC */
 103
 104         /* USBSTS: offset 0x04 */
 105         u32             status;
 106 #define STS_ASS         (1<<15)         /* Async Schedule Status */
 107 #define STS_PSS         (1<<14)         /* Periodic Schedule Status */
 108 #define STS_RECL        (1<<13)         /* Reclamation */
 109 #define STS_HALT        (1<<12)         /* Not running (any reason) */
 110 /* some bits reserved */
 111         /* these STS_* flags are also intr_enable bits (USBINTR) */
 112 #define STS_IAA         (1<<5)          /* Interrupted on async advance */
 113 #define STS_FATAL       (1<<4)          /* such as some PCI access errors */
 114 #define STS_FLR         (1<<3)          /* frame list rolled over */
 115 #define STS_PCD         (1<<2)          /* port change detect */
 116 #define STS_ERR         (1<<1)          /* "error" completion (overflow, ...) */
 117 #define STS_INT         (1<<0)          /* "normal" completion (short, ...) */
 118
 119 #define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
 120
 121         /* USBINTR: offset 0x08 */
 122         u32             intr_enable;
 123
 124         /* FRINDEX: offset 0x0C */
 125         u32             frame_index;    /* current microframe number */
 126         /* CTRLDSSEGMENT: offset 0x10 */
 127         u32             segment;        /* address bits 63:32 if needed */
 128         /* PERIODICLISTBASE: offset 0x14 */
 129         u32             frame_list;     /* points to periodic list */
 130         /* ASYNCLISTADDR: offset 0x18 */
 131         u32             async_next;     /* address of next async queue head */
 132
 133         u32             reserved[9];
 134
 135         /* CONFIGFLAG: offset 0x40 */
 136         u32             configured_flag;
 137 #define FLAG_CF         (1<<0)          /* true: we'll support "high speed" */
 138
 139         /* PORTSC: offset 0x44 */
 140         u32             port_status[0]; /* up to N_PORTS */
 141 /* 31:23 reserved */
 142 #define PORT_WKOC_E     (1<<22)         /* wake on overcurrent (enable) */
 143 #define PORT_WKDISC_E   (1<<21)         /* wake on disconnect (enable) */
 144 #define PORT_WKCONN_E   (1<<20)         /* wake on connect (enable) */
 145 /* 19:16 for port testing */
 146 #define PORT_LED_OFF    (0<<14)
 147 #define PORT_LED_AMBER  (1<<14)
 148 #define PORT_LED_GREEN  (2<<14)
 149 #define PORT_LED_MASK   (3<<14)
 150 #define PORT_OWNER      (1<<13)         /* true: companion hc owns this port */
 151 #define PORT_POWER      (1<<12)         /* true: has power (see PPC) */
 152 #define PORT_USB11(x) (((x)&(3<<10)) == (1<<10))        /* USB 1.1 device */
 153 /* 11:10 for detecting lowspeed devices (reset vs release ownership) */
 154 /* 9 reserved */
 155 #define PORT_RESET      (1<<8)          /* reset port */
 156 #define PORT_SUSPEND    (1<<7)          /* suspend port */
 157 #define PORT_RESUME     (1<<6)          /* resume it */
 158 #define PORT_OCC        (1<<5)          /* over current change */
 159 #define PORT_OC         (1<<4)          /* over current active */
 160 #define PORT_PEC        (1<<3)          /* port enable change */
 161 #define PORT_PE         (1<<2)          /* port enable */
 162 #define PORT_CSC        (1<<1)          /* connect status change */
 163 #define PORT_CONNECT    (1<<0)          /* device connected */
 164 #define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
 165 } __attribute__ ((packed));
 166
 167 /* Appendix C, Debug port ... intended for use with special "debug devices"
 168  * that can help if there's no serial console.  (nonstandard enumeration.)
 169  */
 170 struct ehci_dbg_port {
 171         u32     control;
 172 #define DBGP_OWNER      (1<<30)
 173 #define DBGP_ENABLED    (1<<28)
 174 #define DBGP_DONE       (1<<16)
 175 #define DBGP_INUSE      (1<<10)
 176 #define DBGP_ERRCODE(x) (((x)>>7)&0x07)
 177 #       define DBGP_ERR_BAD     1
 178 #       define DBGP_ERR_SIGNAL  2
 179 #define DBGP_ERROR      (1<<6)
 180 #define DBGP_GO         (1<<5)
 181 #define DBGP_OUT        (1<<4)
 182 #define DBGP_LEN(x)     (((x)>>0)&0x0f)
 183         u32     pids;
 184 #define DBGP_PID_GET(x)         (((x)>>16)&0xff)
 185 #define DBGP_PID_SET(data, tok) (((data)<<8)|(tok))
 186         u32     data03;
 187         u32     data47;
 188         u32     address;
 189 #define DBGP_EPADDR(dev, ep)    (((dev)<<8)|(ep))
 190 } __attribute__ ((packed));
 191
 192
 193 #define QTD_NEXT(dma)   cpu_to_le32((u32)dma)
 194
 195 /*
 196  * EHCI Specification 0.95 Section 3.5
 197  * QTD: describe data transfer components (buffer, direction, ...)
 198  * See Fig 3-6 "Queue Element Transfer Descriptor Block Diagram".
 199  *
 200  * These are associated only with "QH" (Queue Head) structures,
 201  * used with control, bulk, and interrupt transfers.
 202  */
 203 struct ehci_qtd {
 204         /* first part defined by EHCI spec */
 205         __le32                  hw_next;                /* see EHCI 3.5.1 */
 206         __le32                  hw_alt_next;            /* see EHCI 3.5.2 */
 207         __le32                  hw_token;               /* see EHCI 3.5.3 */
 208 #define QTD_TOGGLE      (1 << 31)       /* data toggle */
 209 #define QTD_LENGTH(tok) (((tok)>>16) & 0x7fff)
 210 #define QTD_IOC         (1 << 15)       /* interrupt on complete */
 211 #define QTD_CERR(tok)   (((tok)>>10) & 0x3)
 212 #define QTD_PID(tok)    (((tok)>>8) & 0x3)
 213 #define QTD_STS_ACTIVE  (1 << 7)        /* HC may execute this */
 214 #define QTD_STS_HALT    (1 << 6)        /* halted on error */
 215 #define QTD_STS_DBE     (1 << 5)        /* data buffer error (in HC) */
 216 #define QTD_STS_BABBLE  (1 << 4)        /* device was babbling (qtd halted) */
 217 #define QTD_STS_XACT    (1 << 3)        /* device gave illegal response */
 218 #define QTD_STS_MMF     (1 << 2)        /* incomplete split transaction */
 219 #define QTD_STS_STS     (1 << 1)        /* split transaction state */
 220 #define QTD_STS_PING    (1 << 0)        /* issue PING? */
 221         __le32                  hw_buf[5];              /* see EHCI 3.5.4 */
 222         __le32                  hw_buf_hi[5];           /* Appendix B */
 223
 224         /* the rest is HCD-private */
 225         dma_addr_t              qtd_dma;                /* qtd address */
 226         struct list_head        qtd_list;               /* sw qtd list */
 227         struct urb              *urb;                   /* qtd's urb */
 228         size_t                  length;                 /* length of buffer */
 229
 230         u32                     qtd_buffer_len;
 231         void                    *buffer;
 232         dma_addr_t              buffer_dma;
 233         void                    *transfer_buffer;
 234         void                    *transfer_dma;
 235 } __attribute__ ((aligned(32)));
 236
 237 /* mask NakCnt+T in qh->hw_alt_next */
 238 #define QTD_MASK cpu_to_le32 (~0x1f)
 239
 240 #define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1)
 241
 242 /* Type tag from {qh, itd, sitd, fstn}->hw_next */
 243 #define Q_NEXT_TYPE(dma) ((dma) & cpu_to_le32 (3 << 1))
 244
 245 /* values for that type tag */
 246 #define Q_TYPE_QH       cpu_to_le32 (1 << 1)
 247
 248 /* next async queue entry, or pointer to interrupt/periodic QH */
 249 #define QH_NEXT(dma)    (cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH)
 250
 251 /* for periodic/async schedules and qtd lists, mark end of list */
 252 #define EHCI_LIST_END   cpu_to_le32(1) /* "null pointer" to hw */
 253
 254 /*
 255  * Entries in periodic shadow table are pointers to one of four kinds
 256  * of data structure.  That's dictated by the hardware; a type tag is
 257  * encoded in the low bits of the hardware's periodic schedule.  Use
 258  * Q_NEXT_TYPE to get the tag.
 259  *
 260  * For entries in the async schedule, the type tag always says "qh".
 261  */
 262 union ehci_shadow {
 263         struct ehci_qh          *qh;            /* Q_TYPE_QH */
 264         __le32                  *hw_next;       /* (all types) */
 265         void                    *ptr;
 266 };
 267
 268 /*
 269  * EHCI Specification 0.95 Section 3.6
 270  * QH: describes control/bulk/interrupt endpoints
 271  * See Fig 3-7 "Queue Head Structure Layout".
 272  *
 273  * These appear in both the async and (for interrupt) periodic schedules.
 274  */
 275
 276 struct ehci_qh {
 277         /* first part defined by EHCI spec */
 278         __le32                  hw_next;         /* see EHCI 3.6.1 */
 279         __le32                  hw_info1;       /* see EHCI 3.6.2 */
 280 #define QH_HEAD         0x00008000
 281         __le32                  hw_info2;       /* see EHCI 3.6.2 */
 282 #define QH_SMASK        0x000000ff
 283 #define QH_CMASK        0x0000ff00
 284 #define QH_HUBADDR      0x007f0000
 285 #define QH_HUBPORT      0x3f800000
 286 #define QH_MULT         0xc0000000
 287         __le32                  hw_current;      /* qtd list - see EHCI 3.6.4 */
 288
 289         /* qtd overlay (hardware parts of a struct ehci_qtd) */
 290         __le32                  hw_qtd_next;
 291         __le32                  hw_alt_next;
 292         __le32                  hw_token;
 293         __le32                  hw_buf[5];
 294         __le32                  hw_buf_hi[5];
 295
 296         /* the rest is HCD-private */
 297         dma_addr_t              qh_dma;         /* address of qh */
 298         union ehci_shadow       qh_next;        /* ptr to qh; or periodic */
 299         struct list_head        qtd_list;       /* sw qtd list */
 300         struct ehci_qtd         *dummy;
 301         struct ehci_qh          *reclaim;       /* next to reclaim */
 302
 303         struct oxu_hcd          *oxu;
 304         struct kref             kref;
 305         unsigned                stamp;
 306
 307         u8                      qh_state;
 308 #define QH_STATE_LINKED         1               /* HC sees this */
 309 #define QH_STATE_UNLINK         2               /* HC may still see this */
 310 #define QH_STATE_IDLE           3               /* HC doesn't see this */
 311 #define QH_STATE_UNLINK_WAIT    4               /* LINKED and on reclaim q */
 312 #define QH_STATE_COMPLETING     5               /* don't touch token.HALT */
 313
 314         /* periodic schedule info */
 315         u8                      usecs;          /* intr bandwidth */
 316         u8                      gap_uf;         /* uframes split/csplit gap */
 317         u8                      c_usecs;        /* ... split completion bw */
 318         u16                     tt_usecs;       /* tt downstream bandwidth */
 319         unsigned short          period;         /* polling interval */
 320         unsigned short          start;          /* where polling starts */
 321 #define NO_FRAME ((unsigned short)~0)                   /* pick new start */
 322         struct usb_device       *dev;           /* access to TT */
 323 } __attribute__ ((aligned(32)));
 324
 325 /*
 326  * Proper OXU210HP structs
 327  */
 328
 329 #define OXU_OTG_CORE_OFFSET     0x00400
 330 #define OXU_OTG_CAP_OFFSET      (OXU_OTG_CORE_OFFSET + 0x100)
 331 #define OXU_SPH_CORE_OFFSET     0x00800
 332 #define OXU_SPH_CAP_OFFSET      (OXU_SPH_CORE_OFFSET + 0x100)
 333
 334 #define OXU_OTG_MEM             0xE000
 335 #define OXU_SPH_MEM             0x16000
 336
 337 /* Only how many elements & element structure are specifies here. */
 338 /* 2 host controllers are enabled - total size <= 28 kbytes */
 339 #define DEFAULT_I_TDPS          1024
 340 #define QHEAD_NUM               16
 341 #define QTD_NUM                 32
 342 #define SITD_NUM                8
 343 #define MURB_NUM                8
 344
 345 #define BUFFER_NUM              8
 346 #define BUFFER_SIZE             512
 347
 348 struct oxu_info {
 349         struct usb_hcd *hcd[2];
 350 };
 351
 352 struct oxu_buf {
 353         u8                      buffer[BUFFER_SIZE];
 354 } __attribute__ ((aligned(BUFFER_SIZE)));
 355
 356 struct oxu_onchip_mem {
 357         struct oxu_buf          db_pool[BUFFER_NUM];
 358
 359         u32                     frame_list[DEFAULT_I_TDPS];
 360         struct ehci_qh          qh_pool[QHEAD_NUM];
 361         struct ehci_qtd         qtd_pool[QTD_NUM];
 362 } __attribute__ ((aligned(4 << 10)));
 363
 364 #define EHCI_MAX_ROOT_PORTS     15              /* see HCS_N_PORTS */
 365
 366 struct oxu_murb {
 367         struct urb              urb;
 368         struct urb              *main;
 369         u8                      last;
 370 };
 371
 372 struct oxu_hcd {                                /* one per controller */
 373         unsigned int            is_otg:1;
 374
 375         u8                      qh_used[QHEAD_NUM];
 376         u8                      qtd_used[QTD_NUM];
 377         u8                      db_used[BUFFER_NUM];
 378         u8                      murb_used[MURB_NUM];
 379
 380         struct oxu_onchip_mem   __iomem *mem;
 381         spinlock_t              mem_lock;
 382
 383         struct timer_list       urb_timer;
 384
 385         struct ehci_caps __iomem *caps;
 386         struct ehci_regs __iomem *regs;
 387
 388         __u32                   hcs_params;     /* cached register copy */
 389         spinlock_t              lock;
 390
 391         /* async schedule support */
 392         struct ehci_qh          *async;
 393         struct ehci_qh          *reclaim;
 394         unsigned                reclaim_ready:1;
 395         unsigned                scanning:1;
 396
 397         /* periodic schedule support */
 398         unsigned                periodic_size;
 399         __le32                  *periodic;      /* hw periodic table */
 400         dma_addr_t              periodic_dma;
 401         unsigned                i_thresh;       /* uframes HC might cache */
 402
 403         union ehci_shadow       *pshadow;       /* mirror hw periodic table */
 404         int                     next_uframe;    /* scan periodic, start here */
 405         unsigned                periodic_sched; /* periodic activity count */
 406
 407         /* per root hub port */
 408         unsigned long           reset_done[EHCI_MAX_ROOT_PORTS];
 409         /* bit vectors (one bit per port) */
 410         unsigned long           bus_suspended;  /* which ports were
 411                                                  * already suspended at the
 412                                                  * start of a bus suspend
 413                                                  */
 414         unsigned long           companion_ports;/* which ports are dedicated
 415                                                  * to the companion controller
 416                                                  */
 417
 418         struct timer_list       watchdog;
 419         unsigned long           actions;
 420         unsigned                stamp;
 421         unsigned long           next_statechange;
 422         u32                     command;
 423
 424         /* SILICON QUIRKS */
 425         struct list_head        urb_list;       /* this is the head to urb
 426                                                  * queue that didn't get enough
 427                                                  * resources
 428                                                  */
 429         struct oxu_murb         *murb_pool;     /* murb per split big urb */
 430         unsigned urb_len;
 431
 432         u8                      sbrn;           /* packed release number */
 433 };
 434
 435 #define EHCI_IAA_JIFFIES        (HZ/100)        /* arbitrary; ~10 msec */
 436 #define EHCI_IO_JIFFIES         (HZ/10)         /* io watchdog > irq_thresh */
 437 #define EHCI_ASYNC_JIFFIES      (HZ/20)         /* async idle timeout */
 438 #define EHCI_SHRINK_JIFFIES     (HZ/200)        /* async qh unlink delay */
 439
 440 enum ehci_timer_action {
 441         TIMER_IO_WATCHDOG,
 442         TIMER_IAA_WATCHDOG,
 443         TIMER_ASYNC_SHRINK,
 444         TIMER_ASYNC_OFF,
 445 };
 446
 447 #include <linux/oxu210hp.h>