2 * Merged with mainline ieee80211.h in Aug 2004. Original ieee802_11
3 * remains copyright by the original authors
5 * Portions of the merged code are based on Host AP (software wireless
6 * LAN access point) driver for Intersil Prism2/2.5/3.
8 * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
10 * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
12 * Adaption to a generic IEEE 802.11 stack by James Ketrenos
13 * <jketreno@linux.intel.com>
14 * Copyright (c) 2004, Intel Corporation
16 * Modified for Realtek's wi-fi cards by Andrea Merello
17 * <andreamrl@tiscali.it>
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License version 2 as
21 * published by the Free Software Foundation. See README and COPYING for
26 #include <linux/if_ether.h> /* ETH_ALEN */
27 #include <linux/kernel.h> /* ARRAY_SIZE */
28 #include <linux/version.h>
29 #include <linux/module.h>
30 #include <linux/jiffies.h>
31 #include <linux/timer.h>
32 #include <linux/sched.h>
33 #include <linux/semaphore.h>
35 #include <linux/delay.h>
36 #include <linux/wireless.h>
38 #include "rtl819x_HT.h"
39 #include "rtl819x_BA.h"
40 #include "rtl819x_TS.h"
42 #ifndef IW_MODE_MONITOR
43 #define IW_MODE_MONITOR 6
47 #define IWEVCUSTOM 0x8c02
50 #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
52 #define __bitwise __attribute__((bitwise))
55 #if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,27))
57 /* --- Standard spy support --- */
59 u_char spy_address
[IW_MAX_SPY
][ETH_ALEN
];
60 struct iw_quality spy_stat
[IW_MAX_SPY
];
61 /* --- Enhanced spy support (event) */
62 struct iw_quality spy_thr_low
; /* Low threshold */
63 struct iw_quality spy_thr_high
; /* High threshold */
64 u_char spy_thr_under
[IW_MAX_SPY
];
71 * container_of - cast a member of a structure out to the containing structure
73 * @ptr: the pointer to the member.
74 * @type: the type of the container struct this is embedded in.
75 * @member: the name of the member within the struct.
78 #define container_of(ptr, type, member) ({ \
79 const typeof( ((type *)0)->member ) *__mptr = (ptr); \
80 (type *)( (char *)__mptr - offsetof(type,member) );})
83 #define KEY_TYPE_NA 0x0
84 #define KEY_TYPE_WEP40 0x1
85 #define KEY_TYPE_TKIP 0x2
86 #define KEY_TYPE_CCMP 0x4
87 #define KEY_TYPE_WEP104 0x5
89 /* added for rtl819x tx procedure */
90 #define MAX_QUEUE_SIZE 0x10
100 #define TXCMD_QUEUE 5
103 #define BEACON_QUEUE 8
105 #define LOW_QUEUE BE_QUEUE
106 #define NORMAL_QUEUE MGNT_QUEUE
108 //added by amy for ps
109 #define SWRF_TIMEOUT 50
111 //added by amy for LEAP related
112 #define IE_CISCO_FLAG_POSITION 0x08 // Flag byte: byte 8, numbered from 0.
113 #define SUPPORT_CKIP_MIC 0x08 // bit3
114 #define SUPPORT_CKIP_PK 0x10 // bit4
115 /* defined for skb cb field */
116 /* At most 28 byte */
117 typedef struct cb_desc
{
118 /* Tx Desc Related flags (8-9) */
124 u8 bTxDisableRateFallBack
:1;
125 u8 bTxUseDriverAssingedRate
:1;
126 u8 bHwSec
:1; //indicate whether use Hw security. WB
130 /* Tx Firmware Relaged flags (10-11)*/
134 u8 bUseShortPreamble
:1;
135 u8 bTxEnableFwCalcDur
:1;
142 u8 bRTSUseShortPreamble
:1;
150 /* Tx Desc related element(12-19) */
162 /* Tx firmware related element(20-27) */
177 /*--------------------------Define -------------------------------------------*/
180 #define MGN_5_5M 0x0b
192 #define MGN_MCS0 0x80
193 #define MGN_MCS1 0x81
194 #define MGN_MCS2 0x82
195 #define MGN_MCS3 0x83
196 #define MGN_MCS4 0x84
197 #define MGN_MCS5 0x85
198 #define MGN_MCS6 0x86
199 #define MGN_MCS7 0x87
200 #define MGN_MCS8 0x88
201 #define MGN_MCS9 0x89
202 #define MGN_MCS10 0x8a
203 #define MGN_MCS11 0x8b
204 #define MGN_MCS12 0x8c
205 #define MGN_MCS13 0x8d
206 #define MGN_MCS14 0x8e
207 #define MGN_MCS15 0x8f
209 //----------------------------------------------------------------------------
210 // 802.11 Management frame Reason Code field
211 //----------------------------------------------------------------------------
214 auth_not_valid
= 0x2,
227 // Reason code defined in 802.11i D10.0 p.28.
229 four_way_tmout
= 0x0f,
230 two_way_tmout
= 0x10,
232 invalid_Gcipher
= 0x12,
233 invalid_Pcipher
= 0x13,
235 unsup_RSNIEver
= 0x15,
236 invalid_RSNIE
= 0x16,
237 auth_802_1x_fail
= 0x17,
240 // Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. Added by Annie, 2005-11-15.
241 QoS_unspec
= 0x20, // 32
242 QAP_bandwidth
= 0x21, // 33
243 poor_condition
= 0x22, // 34
244 no_facility
= 0x23, // 35
246 req_declined
= 0x25, // 37
247 invalid_param
= 0x26, // 38
248 req_not_honored
= 0x27, // 39
249 TS_not_created
= 0x2F, // 47
250 DL_not_allowed
= 0x30, // 48
251 dest_not_exist
= 0x31, // 49
252 dest_not_QSTA
= 0x32, // 50
257 #define aSifsTime (((priv->ieee80211->current_network.mode == IEEE_A)||(priv->ieee80211->current_network.mode == IEEE_N_24G)||(priv->ieee80211->current_network.mode == IEEE_N_5G))? 16 : 10)
259 #define MGMT_QUEUE_NUM 5
261 #define IEEE_CMD_SET_WPA_PARAM 1
262 #define IEEE_CMD_SET_WPA_IE 2
263 #define IEEE_CMD_SET_ENCRYPTION 3
264 #define IEEE_CMD_MLME 4
266 #define IEEE_PARAM_WPA_ENABLED 1
267 #define IEEE_PARAM_TKIP_COUNTERMEASURES 2
268 #define IEEE_PARAM_DROP_UNENCRYPTED 3
269 #define IEEE_PARAM_PRIVACY_INVOKED 4
270 #define IEEE_PARAM_AUTH_ALGS 5
271 #define IEEE_PARAM_IEEE_802_1X 6
272 //It should consistent with the driver_XXX.c
274 #define IEEE_PARAM_WPAX_SELECT 7
275 //Added for notify the encryption type selection
277 #define IEEE_PROTO_WPA 1
278 #define IEEE_PROTO_RSN 2
279 //Added for notify the encryption type selection
281 #define IEEE_WPAX_USEGROUP 0
282 #define IEEE_WPAX_WEP40 1
283 #define IEEE_WPAX_TKIP 2
284 #define IEEE_WPAX_WRAP 3
285 #define IEEE_WPAX_CCMP 4
286 #define IEEE_WPAX_WEP104 5
288 #define IEEE_KEY_MGMT_IEEE8021X 1
289 #define IEEE_KEY_MGMT_PSK 2
291 #define IEEE_MLME_STA_DEAUTH 1
292 #define IEEE_MLME_STA_DISASSOC 2
295 #define IEEE_CRYPT_ERR_UNKNOWN_ALG 2
296 #define IEEE_CRYPT_ERR_UNKNOWN_ADDR 3
297 #define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED 4
298 #define IEEE_CRYPT_ERR_KEY_SET_FAILED 5
299 #define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6
300 #define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7
303 #define IEEE_CRYPT_ALG_NAME_LEN 16
305 #define MAX_IE_LEN 0xff
307 // added for kernel conflict
308 #define ieee80211_crypt_deinit_entries ieee80211_crypt_deinit_entries_rsl
309 #define ieee80211_crypt_deinit_handler ieee80211_crypt_deinit_handler_rsl
310 #define ieee80211_crypt_delayed_deinit ieee80211_crypt_delayed_deinit_rsl
311 #define ieee80211_register_crypto_ops ieee80211_register_crypto_ops_rsl
312 #define ieee80211_unregister_crypto_ops ieee80211_unregister_crypto_ops_rsl
313 #define ieee80211_get_crypto_ops ieee80211_get_crypto_ops_rsl
315 #define ieee80211_ccmp_null ieee80211_ccmp_null_rsl
317 #define ieee80211_tkip_null ieee80211_tkip_null_rsl
319 #define ieee80211_wep_null ieee80211_wep_null_rsl
321 #define free_ieee80211 free_ieee80211_rsl
322 #define alloc_ieee80211 alloc_ieee80211_rsl
324 #define ieee80211_rx ieee80211_rx_rsl
325 #define ieee80211_rx_mgt ieee80211_rx_mgt_rsl
327 #define ieee80211_get_beacon ieee80211_get_beacon_rsl
328 #define ieee80211_rtl_wake_queue ieee80211_rtl_wake_queue_rsl
329 #define ieee80211_rtl_stop_queue ieee80211_rtl_stop_queue_rsl
330 #define ieee80211_reset_queue ieee80211_reset_queue_rsl
331 #define ieee80211_softmac_stop_protocol ieee80211_softmac_stop_protocol_rsl
332 #define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl
333 #define ieee80211_is_shortslot ieee80211_is_shortslot_rsl
334 #define ieee80211_is_54g ieee80211_is_54g_rsl
335 #define ieee80211_wpa_supplicant_ioctl ieee80211_wpa_supplicant_ioctl_rsl
336 #define ieee80211_ps_tx_ack ieee80211_ps_tx_ack_rsl
337 #define ieee80211_softmac_xmit ieee80211_softmac_xmit_rsl
338 #define ieee80211_stop_send_beacons ieee80211_stop_send_beacons_rsl
339 #define notify_wx_assoc_event notify_wx_assoc_event_rsl
340 #define SendDisassociation SendDisassociation_rsl
341 #define ieee80211_disassociate ieee80211_disassociate_rsl
342 #define ieee80211_start_send_beacons ieee80211_start_send_beacons_rsl
343 #define ieee80211_stop_scan ieee80211_stop_scan_rsl
344 #define ieee80211_send_probe_requests ieee80211_send_probe_requests_rsl
345 #define ieee80211_softmac_scan_syncro ieee80211_softmac_scan_syncro_rsl
346 #define ieee80211_start_scan_syncro ieee80211_start_scan_syncro_rsl
348 #define ieee80211_wx_get_essid ieee80211_wx_get_essid_rsl
349 #define ieee80211_wx_set_essid ieee80211_wx_set_essid_rsl
350 #define ieee80211_wx_set_rate ieee80211_wx_set_rate_rsl
351 #define ieee80211_wx_get_rate ieee80211_wx_get_rate_rsl
352 #define ieee80211_wx_set_wap ieee80211_wx_set_wap_rsl
353 #define ieee80211_wx_get_wap ieee80211_wx_get_wap_rsl
354 #define ieee80211_wx_set_mode ieee80211_wx_set_mode_rsl
355 #define ieee80211_wx_get_mode ieee80211_wx_get_mode_rsl
356 #define ieee80211_wx_set_scan ieee80211_wx_set_scan_rsl
357 #define ieee80211_wx_get_freq ieee80211_wx_get_freq_rsl
358 #define ieee80211_wx_set_freq ieee80211_wx_set_freq_rsl
359 #define ieee80211_wx_set_rawtx ieee80211_wx_set_rawtx_rsl
360 #define ieee80211_wx_get_name ieee80211_wx_get_name_rsl
361 #define ieee80211_wx_set_power ieee80211_wx_set_power_rsl
362 #define ieee80211_wx_get_power ieee80211_wx_get_power_rsl
363 #define ieee80211_wlan_frequencies ieee80211_wlan_frequencies_rsl
364 #define ieee80211_wx_set_rts ieee80211_wx_set_rts_rsl
365 #define ieee80211_wx_get_rts ieee80211_wx_get_rts_rsl
367 #define ieee80211_txb_free ieee80211_txb_free_rsl
369 #define ieee80211_wx_set_gen_ie ieee80211_wx_set_gen_ie_rsl
370 #define ieee80211_wx_get_scan ieee80211_wx_get_scan_rsl
371 #define ieee80211_wx_set_encode ieee80211_wx_set_encode_rsl
372 #define ieee80211_wx_get_encode ieee80211_wx_get_encode_rsl
373 #if WIRELESS_EXT >= 18
374 #define ieee80211_wx_set_mlme ieee80211_wx_set_mlme_rsl
375 #define ieee80211_wx_set_auth ieee80211_wx_set_auth_rsl
376 #define ieee80211_wx_set_encode_ext ieee80211_wx_set_encode_ext_rsl
377 #define ieee80211_wx_get_encode_ext ieee80211_wx_get_encode_ext_rsl
381 typedef struct ieee_param
{
383 u8 sta_addr
[ETH_ALEN
];
399 u8 alg
[IEEE_CRYPT_ALG_NAME_LEN
];
403 u8 seq
[8]; /* sequence counter (set: RX, get: TX) */
411 #if WIRELESS_EXT < 17
412 #define IW_QUAL_QUAL_INVALID 0x10
413 #define IW_QUAL_LEVEL_INVALID 0x20
414 #define IW_QUAL_NOISE_INVALID 0x40
415 #define IW_QUAL_QUAL_UPDATED 0x1
416 #define IW_QUAL_LEVEL_UPDATED 0x2
417 #define IW_QUAL_NOISE_UPDATED 0x4
420 // linux under 2.6.9 release may not support it, so modify it for common use
421 #define MSECS(t) msecs_to_jiffies(t)
422 #define msleep_interruptible_rsl msleep_interruptible
424 #define IEEE80211_DATA_LEN 2304
425 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
428 The figure in section 7.1.2 suggests a body size of up to 2312
429 bytes is allowed, which is a bit confusing, I suspect this
430 represents the 2304 bytes of real data, plus a possible 8 bytes of
431 WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
432 #define IEEE80211_1ADDR_LEN 10
433 #define IEEE80211_2ADDR_LEN 16
434 #define IEEE80211_3ADDR_LEN 24
435 #define IEEE80211_4ADDR_LEN 30
436 #define IEEE80211_FCS_LEN 4
437 #define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
438 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
439 #define IEEE80211_MGMT_HDR_LEN 24
440 #define IEEE80211_DATA_HDR3_LEN 24
441 #define IEEE80211_DATA_HDR4_LEN 30
443 #define MIN_FRAG_THRESHOLD 256U
444 #define MAX_FRAG_THRESHOLD 2346U
447 /* Frame control field constants */
448 #define IEEE80211_FCTL_VERS 0x0003
449 #define IEEE80211_FCTL_FTYPE 0x000c
450 #define IEEE80211_FCTL_STYPE 0x00f0
451 #define IEEE80211_FCTL_FRAMETYPE 0x00fc
452 #define IEEE80211_FCTL_TODS 0x0100
453 #define IEEE80211_FCTL_FROMDS 0x0200
454 #define IEEE80211_FCTL_DSTODS 0x0300 //added by david
455 #define IEEE80211_FCTL_MOREFRAGS 0x0400
456 #define IEEE80211_FCTL_RETRY 0x0800
457 #define IEEE80211_FCTL_PM 0x1000
458 #define IEEE80211_FCTL_MOREDATA 0x2000
459 #define IEEE80211_FCTL_WEP 0x4000
460 #define IEEE80211_FCTL_ORDER 0x8000
462 #define IEEE80211_FTYPE_MGMT 0x0000
463 #define IEEE80211_FTYPE_CTL 0x0004
464 #define IEEE80211_FTYPE_DATA 0x0008
467 #define IEEE80211_STYPE_ASSOC_REQ 0x0000
468 #define IEEE80211_STYPE_ASSOC_RESP 0x0010
469 #define IEEE80211_STYPE_REASSOC_REQ 0x0020
470 #define IEEE80211_STYPE_REASSOC_RESP 0x0030
471 #define IEEE80211_STYPE_PROBE_REQ 0x0040
472 #define IEEE80211_STYPE_PROBE_RESP 0x0050
473 #define IEEE80211_STYPE_BEACON 0x0080
474 #define IEEE80211_STYPE_ATIM 0x0090
475 #define IEEE80211_STYPE_DISASSOC 0x00A0
476 #define IEEE80211_STYPE_AUTH 0x00B0
477 #define IEEE80211_STYPE_DEAUTH 0x00C0
478 #define IEEE80211_STYPE_MANAGE_ACT 0x00D0
481 #define IEEE80211_STYPE_PSPOLL 0x00A0
482 #define IEEE80211_STYPE_RTS 0x00B0
483 #define IEEE80211_STYPE_CTS 0x00C0
484 #define IEEE80211_STYPE_ACK 0x00D0
485 #define IEEE80211_STYPE_CFEND 0x00E0
486 #define IEEE80211_STYPE_CFENDACK 0x00F0
487 #define IEEE80211_STYPE_BLOCKACK 0x0094
490 #define IEEE80211_STYPE_DATA 0x0000
491 #define IEEE80211_STYPE_DATA_CFACK 0x0010
492 #define IEEE80211_STYPE_DATA_CFPOLL 0x0020
493 #define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030
494 #define IEEE80211_STYPE_NULLFUNC 0x0040
495 #define IEEE80211_STYPE_CFACK 0x0050
496 #define IEEE80211_STYPE_CFPOLL 0x0060
497 #define IEEE80211_STYPE_CFACKPOLL 0x0070
498 #define IEEE80211_STYPE_QOS_DATA 0x0080 //added for WMM 2006/8/2
499 #define IEEE80211_STYPE_QOS_NULL 0x00C0
501 #define IEEE80211_SCTL_FRAG 0x000F
502 #define IEEE80211_SCTL_SEQ 0xFFF0
505 #define IEEE80211_QCTL_TID 0x000F
507 #define FC_QOS_BIT BIT7
508 #define IsDataFrame(pdu) ( ((pdu[0] & 0x0C)==0x08) ? true : false )
509 #define IsLegacyDataFrame(pdu) (IsDataFrame(pdu) && (!(pdu[0]&FC_QOS_BIT)) )
510 //added by wb. Is this right?
511 #define IsQoSDataFrame(pframe) ((*(u16*)pframe&(IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA)) == (IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA))
512 #define Frame_Order(pframe) (*(u16*)pframe&IEEE80211_FCTL_ORDER)
513 #define SN_LESS(a, b) (((a-b)&0x800)!=0)
514 #define SN_EQUAL(a, b) (a == b)
515 #define MAX_DEV_ADDR_SIZE 8
516 typedef enum _ACT_CATEGORY
{
522 } ACT_CATEGORY
, *PACT_CATEGORY
;
524 typedef enum _TS_ACTION
{
529 } TS_ACTION
, *PTS_ACTION
;
531 typedef enum _BA_ACTION
{
535 } BA_ACTION
, *PBA_ACTION
;
537 typedef enum _InitialGainOpType
{
544 #define CONFIG_IEEE80211_DEBUG
545 #ifdef CONFIG_IEEE80211_DEBUG
546 extern u32 ieee80211_debug_level
;
547 #define IEEE80211_DEBUG(level, fmt, args...) \
548 do { if (ieee80211_debug_level & (level)) \
549 printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0)
550 //wb added to debug out data buf
551 //if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
552 #define IEEE80211_DEBUG_DATA(level, data, datalen) \
553 do{ if ((ieee80211_debug_level & (level)) == (level)) \
556 u8* pdata = (u8*) data; \
557 printk(KERN_DEBUG "ieee80211: %s()\n", __FUNCTION__); \
558 for(i=0; i<(int)(datalen); i++) \
560 printk("%2x ", pdata[i]); \
561 if ((i+1)%16 == 0) printk("\n"); \
567 #define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
568 #define IEEE80211_DEBUG_DATA(level, data, datalen) do {} while(0)
569 #endif /* CONFIG_IEEE80211_DEBUG */
571 /* debug macros not dependent on CONFIG_IEEE80211_DEBUG */
574 #define IEEE80211_DL_INFO (1<<0)
575 #define IEEE80211_DL_WX (1<<1)
576 #define IEEE80211_DL_SCAN (1<<2)
577 #define IEEE80211_DL_STATE (1<<3)
578 #define IEEE80211_DL_MGMT (1<<4)
579 #define IEEE80211_DL_FRAG (1<<5)
580 #define IEEE80211_DL_EAP (1<<6)
581 #define IEEE80211_DL_DROP (1<<7)
583 #define IEEE80211_DL_TX (1<<8)
584 #define IEEE80211_DL_RX (1<<9)
586 #define IEEE80211_DL_HT (1<<10) //HT
587 #define IEEE80211_DL_BA (1<<11) //ba
588 #define IEEE80211_DL_TS (1<<12) //TS
589 #define IEEE80211_DL_QOS (1<<13)
590 #define IEEE80211_DL_REORDER (1<<14)
591 #define IEEE80211_DL_IOT (1<<15)
592 #define IEEE80211_DL_IPS (1<<16)
593 #define IEEE80211_DL_TRACE (1<<29) //trace function, need to user net_ratelimit() together in order not to print too much to the screen
594 #define IEEE80211_DL_DATA (1<<30) //use this flag to control whether print data buf out.
595 #define IEEE80211_DL_ERR (1<<31) //always open
596 #define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
597 #define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
598 #define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
600 #define IEEE80211_DEBUG_WX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
601 #define IEEE80211_DEBUG_SCAN(f, a...) IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
602 #define IEEE80211_DEBUG_STATE(f, a...) IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
603 #define IEEE80211_DEBUG_MGMT(f, a...) IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
604 #define IEEE80211_DEBUG_FRAG(f, a...) IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
605 #define IEEE80211_DEBUG_EAP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
606 #define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
607 #define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
608 #define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
609 #define IEEE80211_DEBUG_QOS(f, a...) IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a)
611 #ifdef CONFIG_IEEE80211_DEBUG
612 /* Added by Annie, 2005-11-22. */
613 #define MAX_STR_LEN 64
614 /* I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22.*/
615 #define PRINTABLE(_ch) (_ch>'!' && _ch<'~')
616 #define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len) \
617 if((_Comp) & level) \
620 u8 buffer[MAX_STR_LEN]; \
621 int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ; \
622 memset(buffer, 0, MAX_STR_LEN); \
623 memcpy(buffer, (u8 *)_Ptr, length ); \
624 for( __i=0; __i<MAX_STR_LEN; __i++ ) \
626 if( !PRINTABLE(buffer[__i]) ) buffer[__i] = '?'; \
628 buffer[length] = '\0'; \
629 printk("Rtl819x: "); \
630 printk(_TitleString); \
631 printk(": %d, <%s>\n", _Len, buffer); \
634 #define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len) do {} while (0)
637 #include <linux/netdevice.h>
638 #include <linux/if_arp.h> /* ARPHRD_ETHER */
641 #define WIRELESS_SPY // enable iwspy support
643 #include <net/iw_handler.h> // new driver API
646 #define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
647 #endif /* ETH_P_PAE */
649 #define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
651 #ifndef ETH_P_80211_RAW
652 #define ETH_P_80211_RAW (ETH_P_ECONET + 1)
655 /* IEEE 802.11 defines */
657 #define P80211_OUI_LEN 3
659 struct ieee80211_snap_hdr
{
661 u8 dsap
; /* always 0xAA */
662 u8 ssap
; /* always 0xAA */
663 u8 ctrl
; /* always 0x03 */
664 u8 oui
[P80211_OUI_LEN
]; /* organizational universal id */
666 } __attribute__ ((packed
));
668 #define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
670 #define WLAN_FC_GET_VERS(fc) ((fc) & IEEE80211_FCTL_VERS)
671 #define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
672 #define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
673 #define WLAN_FC_MORE_DATA(fc) ((fc) & IEEE80211_FCTL_MOREDATA)
676 #define WLAN_FC_GET_FRAMETYPE(fc) ((fc) & IEEE80211_FCTL_FRAMETYPE)
677 #define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
678 #define WLAN_GET_SEQ_SEQ(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
680 /* Authentication algorithms */
681 #define WLAN_AUTH_OPEN 0
682 #define WLAN_AUTH_SHARED_KEY 1
683 #define WLAN_AUTH_LEAP 2
685 #define WLAN_AUTH_CHALLENGE_LEN 128
687 #define WLAN_CAPABILITY_BSS (1<<0)
688 #define WLAN_CAPABILITY_IBSS (1<<1)
689 #define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
690 #define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
691 #define WLAN_CAPABILITY_PRIVACY (1<<4)
692 #define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
693 #define WLAN_CAPABILITY_PBCC (1<<6)
694 #define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
695 #define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8)
696 #define WLAN_CAPABILITY_QOS (1<<9)
697 #define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
698 #define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
700 /* 802.11g ERP information element */
701 #define WLAN_ERP_NON_ERP_PRESENT (1<<0)
702 #define WLAN_ERP_USE_PROTECTION (1<<1)
703 #define WLAN_ERP_BARKER_PREAMBLE (1<<2)
706 enum ieee80211_statuscode
{
707 WLAN_STATUS_SUCCESS
= 0,
708 WLAN_STATUS_UNSPECIFIED_FAILURE
= 1,
709 WLAN_STATUS_CAPS_UNSUPPORTED
= 10,
710 WLAN_STATUS_REASSOC_NO_ASSOC
= 11,
711 WLAN_STATUS_ASSOC_DENIED_UNSPEC
= 12,
712 WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG
= 13,
713 WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION
= 14,
714 WLAN_STATUS_CHALLENGE_FAIL
= 15,
715 WLAN_STATUS_AUTH_TIMEOUT
= 16,
716 WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA
= 17,
717 WLAN_STATUS_ASSOC_DENIED_RATES
= 18,
719 WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE
= 19,
720 WLAN_STATUS_ASSOC_DENIED_NOPBCC
= 20,
721 WLAN_STATUS_ASSOC_DENIED_NOAGILITY
= 21,
723 WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM
= 22,
724 WLAN_STATUS_ASSOC_REJECTED_BAD_POWER
= 23,
725 WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN
= 24,
727 WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME
= 25,
728 WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM
= 26,
730 WLAN_STATUS_INVALID_IE
= 40,
731 WLAN_STATUS_INVALID_GROUP_CIPHER
= 41,
732 WLAN_STATUS_INVALID_PAIRWISE_CIPHER
= 42,
733 WLAN_STATUS_INVALID_AKMP
= 43,
734 WLAN_STATUS_UNSUPP_RSN_VERSION
= 44,
735 WLAN_STATUS_INVALID_RSN_IE_CAP
= 45,
736 WLAN_STATUS_CIPHER_SUITE_REJECTED
= 46,
740 enum ieee80211_reasoncode
{
741 WLAN_REASON_UNSPECIFIED
= 1,
742 WLAN_REASON_PREV_AUTH_NOT_VALID
= 2,
743 WLAN_REASON_DEAUTH_LEAVING
= 3,
744 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
= 4,
745 WLAN_REASON_DISASSOC_AP_BUSY
= 5,
746 WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA
= 6,
747 WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA
= 7,
748 WLAN_REASON_DISASSOC_STA_HAS_LEFT
= 8,
749 WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH
= 9,
751 WLAN_REASON_DISASSOC_BAD_POWER
= 10,
752 WLAN_REASON_DISASSOC_BAD_SUPP_CHAN
= 11,
754 WLAN_REASON_INVALID_IE
= 13,
755 WLAN_REASON_MIC_FAILURE
= 14,
756 WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT
= 15,
757 WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT
= 16,
758 WLAN_REASON_IE_DIFFERENT
= 17,
759 WLAN_REASON_INVALID_GROUP_CIPHER
= 18,
760 WLAN_REASON_INVALID_PAIRWISE_CIPHER
= 19,
761 WLAN_REASON_INVALID_AKMP
= 20,
762 WLAN_REASON_UNSUPP_RSN_VERSION
= 21,
763 WLAN_REASON_INVALID_RSN_IE_CAP
= 22,
764 WLAN_REASON_IEEE8021X_FAILED
= 23,
765 WLAN_REASON_CIPHER_SUITE_REJECTED
= 24,
768 #define IEEE80211_STATMASK_SIGNAL (1<<0)
769 #define IEEE80211_STATMASK_RSSI (1<<1)
770 #define IEEE80211_STATMASK_NOISE (1<<2)
771 #define IEEE80211_STATMASK_RATE (1<<3)
772 #define IEEE80211_STATMASK_WEMASK 0x7
774 #define IEEE80211_CCK_MODULATION (1<<0)
775 #define IEEE80211_OFDM_MODULATION (1<<1)
777 #define IEEE80211_24GHZ_BAND (1<<0)
778 #define IEEE80211_52GHZ_BAND (1<<1)
780 #define IEEE80211_CCK_RATE_LEN 4
781 #define IEEE80211_CCK_RATE_1MB 0x02
782 #define IEEE80211_CCK_RATE_2MB 0x04
783 #define IEEE80211_CCK_RATE_5MB 0x0B
784 #define IEEE80211_CCK_RATE_11MB 0x16
785 #define IEEE80211_OFDM_RATE_LEN 8
786 #define IEEE80211_OFDM_RATE_6MB 0x0C
787 #define IEEE80211_OFDM_RATE_9MB 0x12
788 #define IEEE80211_OFDM_RATE_12MB 0x18
789 #define IEEE80211_OFDM_RATE_18MB 0x24
790 #define IEEE80211_OFDM_RATE_24MB 0x30
791 #define IEEE80211_OFDM_RATE_36MB 0x48
792 #define IEEE80211_OFDM_RATE_48MB 0x60
793 #define IEEE80211_OFDM_RATE_54MB 0x6C
794 #define IEEE80211_BASIC_RATE_MASK 0x80
796 #define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
797 #define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
798 #define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
799 #define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
800 #define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
801 #define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
802 #define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
803 #define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
804 #define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
805 #define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
806 #define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
807 #define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
809 #define IEEE80211_CCK_RATES_MASK 0x0000000F
810 #define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
811 IEEE80211_CCK_RATE_2MB_MASK)
812 #define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
813 IEEE80211_CCK_RATE_5MB_MASK | \
814 IEEE80211_CCK_RATE_11MB_MASK)
816 #define IEEE80211_OFDM_RATES_MASK 0x00000FF0
817 #define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
818 IEEE80211_OFDM_RATE_12MB_MASK | \
819 IEEE80211_OFDM_RATE_24MB_MASK)
820 #define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
821 IEEE80211_OFDM_RATE_9MB_MASK | \
822 IEEE80211_OFDM_RATE_18MB_MASK | \
823 IEEE80211_OFDM_RATE_36MB_MASK | \
824 IEEE80211_OFDM_RATE_48MB_MASK | \
825 IEEE80211_OFDM_RATE_54MB_MASK)
826 #define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
827 IEEE80211_CCK_DEFAULT_RATES_MASK)
829 #define IEEE80211_NUM_OFDM_RATES 8
830 #define IEEE80211_NUM_CCK_RATES 4
831 #define IEEE80211_OFDM_SHIFT_MASK_A 4
834 /* this is stolen and modified from the madwifi driver*/
835 #define IEEE80211_FC0_TYPE_MASK 0x0c
836 #define IEEE80211_FC0_TYPE_DATA 0x08
837 #define IEEE80211_FC0_SUBTYPE_MASK 0xB0
838 #define IEEE80211_FC0_SUBTYPE_QOS 0x80
840 #define IEEE80211_QOS_HAS_SEQ(fc) \
841 (((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
842 (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
844 /* this is stolen from ipw2200 driver */
845 #define IEEE_IBSS_MAC_HASH_SIZE 31
846 struct ieee_ibss_seq
{
850 unsigned long packet_time
[17];
851 struct list_head list
;
854 /* NOTE: This data is for statistical purposes; not all hardware provides this
855 * information for frames received. Not setting these will not cause
856 * any adverse affects. */
857 struct ieee80211_rx_stats
{
862 u16 rate
; /* in 100 kbps */
872 // u8 DataRate; // In 0.5 Mbps
873 u8 SignalQuality
; // in 0-100 index.
874 s32 RecvSignalPower
; // Real power in dBm for this packet, no beautification and aggregation.
875 s8 RxPower
; // in dBm Translate from PWdB
876 u8 SignalStrength
; // in 0-100 index.
880 u16 bShortPreamble
:1;
881 u16 Antenna
:1; //for rtl8185
882 u16 Decrypted
:1; //for rtl8185, rtl8187
883 u16 Wakeup
:1; //for rtl8185
884 u16 Reserved0
:1; //for rtl8185
889 bool bIsQosData
; // Added by Annie, 2005-12-22.
892 //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
893 //1Attention Please!!!<11n or 8190 specific code should be put below this line>
894 //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
901 bool RxIs40MHzPacket
;
903 u8 RxMIMOSignalStrength
[4]; // in 0~100 index
904 s8 RxMIMOSignalQuality
[2];
905 bool bPacketMatchBSSID
;
910 u16 packetlength
; // Total packet length: Must equal to sum of all FragLength
911 u16 fraglength
; // FragLength should equal to PacketLength in non-fragment case
912 u16 fragoffset
; // Data offset for this fragment
914 bool bisrxaggrsubframe
;
915 bool bPacketBeacon
; //cosa add for rssi
916 bool bToSelfBA
; //cosa add for rssi
917 char cck_adc_pwdb
[4]; //cosa add for rx path selection
922 /* IEEE 802.11 requires that STA supports concurrent reception of at least
923 * three fragmented frames. This define can be increased to support more
924 * concurrent frames, but it should be noted that each entry can consume about
925 * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
926 #define IEEE80211_FRAG_CACHE_LEN 4
928 struct ieee80211_frag_entry
{
929 unsigned long first_frag_time
;
931 unsigned int last_frag
;
933 u8 src_addr
[ETH_ALEN
];
934 u8 dst_addr
[ETH_ALEN
];
937 struct ieee80211_stats
{
938 unsigned int tx_unicast_frames
;
939 unsigned int tx_multicast_frames
;
940 unsigned int tx_fragments
;
941 unsigned int tx_unicast_octets
;
942 unsigned int tx_multicast_octets
;
943 unsigned int tx_deferred_transmissions
;
944 unsigned int tx_single_retry_frames
;
945 unsigned int tx_multiple_retry_frames
;
946 unsigned int tx_retry_limit_exceeded
;
947 unsigned int tx_discards
;
948 unsigned int rx_unicast_frames
;
949 unsigned int rx_multicast_frames
;
950 unsigned int rx_fragments
;
951 unsigned int rx_unicast_octets
;
952 unsigned int rx_multicast_octets
;
953 unsigned int rx_fcs_errors
;
954 unsigned int rx_discards_no_buffer
;
955 unsigned int tx_discards_wrong_sa
;
956 unsigned int rx_discards_undecryptable
;
957 unsigned int rx_message_in_msg_fragments
;
958 unsigned int rx_message_in_bad_msg_fragments
;
961 struct ieee80211_device
;
963 #include "ieee80211_crypt.h"
965 #define SEC_KEY_1 (1<<0)
966 #define SEC_KEY_2 (1<<1)
967 #define SEC_KEY_3 (1<<2)
968 #define SEC_KEY_4 (1<<3)
969 #define SEC_ACTIVE_KEY (1<<4)
970 #define SEC_AUTH_MODE (1<<5)
971 #define SEC_UNICAST_GROUP (1<<6)
972 #define SEC_LEVEL (1<<7)
973 #define SEC_ENABLED (1<<8)
974 #define SEC_ENCRYPT (1<<9)
976 #define SEC_LEVEL_0 0 /* None */
977 #define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
978 #define SEC_LEVEL_2 2 /* Level 1 + TKIP */
979 #define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
980 #define SEC_LEVEL_3 4 /* Level 2 + CCMP */
982 #define SEC_ALG_NONE 0
983 #define SEC_ALG_WEP 1
984 #define SEC_ALG_TKIP 2
985 #define SEC_ALG_CCMP 4
988 #define WEP_KEY_LEN 13
989 #define SCM_KEY_LEN 32
990 #define SCM_TEMPORAL_KEY_LENGTH 16
992 struct ieee80211_security
{
997 unicast_uses_group
:1,
999 u8 key_sizes
[WEP_KEYS
];
1000 u8 keys
[WEP_KEYS
][SCM_KEY_LEN
];
1003 } __attribute__ ((packed
));
1007 802.11 data frame from AP
1008 ,-------------------------------------------------------------------.
1009 Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
1010 |------|------|---------|---------|---------|------|---------|------|
1011 Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
1012 | | tion | (BSSID) | | | ence | data | |
1013 `-------------------------------------------------------------------'
1014 Total: 28-2340 bytes
1017 /* Management Frame Information Element Types */
1018 enum ieee80211_mfie
{
1020 MFIE_TYPE_RATES
= 1,
1021 MFIE_TYPE_FH_SET
= 2,
1022 MFIE_TYPE_DS_SET
= 3,
1023 MFIE_TYPE_CF_SET
= 4,
1025 MFIE_TYPE_IBSS_SET
= 6,
1026 MFIE_TYPE_COUNTRY
= 7,
1027 MFIE_TYPE_HOP_PARAMS
= 8,
1028 MFIE_TYPE_HOP_TABLE
= 9,
1029 MFIE_TYPE_REQUEST
= 10,
1030 MFIE_TYPE_CHALLENGE
= 16,
1031 MFIE_TYPE_POWER_CONSTRAINT
= 32,
1032 MFIE_TYPE_POWER_CAPABILITY
= 33,
1033 MFIE_TYPE_TPC_REQUEST
= 34,
1034 MFIE_TYPE_TPC_REPORT
= 35,
1035 MFIE_TYPE_SUPP_CHANNELS
= 36,
1037 MFIE_TYPE_MEASURE_REQUEST
= 38,
1038 MFIE_TYPE_MEASURE_REPORT
= 39,
1039 MFIE_TYPE_QUIET
= 40,
1040 MFIE_TYPE_IBSS_DFS
= 41,
1043 MFIE_TYPE_RATES_EX
= 50,
1044 MFIE_TYPE_HT_CAP
= 45,
1045 MFIE_TYPE_HT_INFO
= 61,
1046 MFIE_TYPE_AIRONET
=133,
1047 MFIE_TYPE_GENERIC
= 221,
1048 MFIE_TYPE_QOS_PARAMETER
= 222,
1051 /* Minimal header; can be used for passing 802.11 frames with sufficient
1052 * information to determine what type of underlying data type is actually
1053 * stored in the data. */
1054 struct ieee80211_pspoll_hdr
{
1060 } __attribute__ ((packed
));
1062 struct ieee80211_hdr
{
1066 } __attribute__ ((packed
));
1068 struct ieee80211_hdr_1addr
{
1073 } __attribute__ ((packed
));
1075 struct ieee80211_hdr_2addr
{
1081 } __attribute__ ((packed
));
1083 struct ieee80211_hdr_3addr
{
1091 } __attribute__ ((packed
));
1093 struct ieee80211_hdr_4addr
{
1102 } __attribute__ ((packed
));
1104 struct ieee80211_hdr_3addrqos
{
1113 } __attribute__ ((packed
));
1115 struct ieee80211_hdr_4addrqos
{
1125 } __attribute__ ((packed
));
1127 struct ieee80211_info_element
{
1131 } __attribute__ ((packed
));
1133 struct ieee80211_authentication
{
1134 struct ieee80211_hdr_3addr header
;
1139 struct ieee80211_info_element info_element
[0];
1140 } __attribute__ ((packed
));
1142 struct ieee80211_disassoc
{
1143 struct ieee80211_hdr_3addr header
;
1145 } __attribute__ ((packed
));
1147 struct ieee80211_probe_request
{
1148 struct ieee80211_hdr_3addr header
;
1149 /* SSID, supported rates */
1150 struct ieee80211_info_element info_element
[0];
1151 } __attribute__ ((packed
));
1153 struct ieee80211_probe_response
{
1154 struct ieee80211_hdr_3addr header
;
1156 __le16 beacon_interval
;
1158 /* SSID, supported rates, FH params, DS params,
1159 * CF params, IBSS params, TIM (if beacon), RSN */
1160 struct ieee80211_info_element info_element
[0];
1161 } __attribute__ ((packed
));
1163 /* Alias beacon for probe_response */
1164 #define ieee80211_beacon ieee80211_probe_response
1166 struct ieee80211_assoc_request_frame
{
1167 struct ieee80211_hdr_3addr header
;
1169 __le16 listen_interval
;
1170 /* SSID, supported rates, RSN */
1171 struct ieee80211_info_element info_element
[0];
1172 } __attribute__ ((packed
));
1174 struct ieee80211_reassoc_request_frame
{
1175 struct ieee80211_hdr_3addr header
;
1177 __le16 listen_interval
;
1178 u8 current_ap
[ETH_ALEN
];
1179 /* SSID, supported rates, RSN */
1180 struct ieee80211_info_element info_element
[0];
1181 } __attribute__ ((packed
));
1183 struct ieee80211_assoc_response_frame
{
1184 struct ieee80211_hdr_3addr header
;
1188 struct ieee80211_info_element info_element
[0]; /* supported rates */
1189 } __attribute__ ((packed
));
1191 struct ieee80211_txb
{
1198 __le16 payload_size
;
1199 struct sk_buff
*fragments
[0];
1202 #define MAX_TX_AGG_COUNT 16
1203 struct ieee80211_drv_agg_txb
{
1204 u8 nr_drv_agg_frames
;
1205 struct sk_buff
*tx_agg_frames
[MAX_TX_AGG_COUNT
];
1206 }__attribute__((packed
));
1208 #define MAX_SUBFRAME_COUNT 64
1209 struct ieee80211_rxb
{
1211 struct sk_buff
*subframes
[MAX_SUBFRAME_COUNT
];
1214 }__attribute__((packed
));
1216 typedef union _frameqos
{
1226 }frameqos
,*pframeqos
;
1228 /* SWEEP TABLE ENTRIES NUMBER*/
1229 #define MAX_SWEEP_TAB_ENTRIES 42
1230 #define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
1231 /* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
1232 * only use 8, and then use extended rates for the remaining supported
1233 * rates. Other APs, however, stick all of their supported rates on the
1234 * main rates information element... */
1235 #define MAX_RATES_LENGTH ((u8)12)
1236 #define MAX_RATES_EX_LENGTH ((u8)16)
1237 #define MAX_NETWORK_COUNT 128
1239 #define MAX_CHANNEL_NUMBER 161
1240 #define IEEE80211_SOFTMAC_SCAN_TIME 100
1242 #define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
1244 #define CRC_LENGTH 4U
1246 #define MAX_WPA_IE_LEN 64
1248 #define NETWORK_EMPTY_ESSID (1<<0)
1249 #define NETWORK_HAS_OFDM (1<<1)
1250 #define NETWORK_HAS_CCK (1<<2)
1253 #define NETWORK_HAS_QOS_PARAMETERS (1<<3)
1254 #define NETWORK_HAS_QOS_INFORMATION (1<<4)
1255 #define NETWORK_HAS_QOS_MASK (NETWORK_HAS_QOS_PARAMETERS | \
1256 NETWORK_HAS_QOS_INFORMATION)
1258 #define NETWORK_HAS_POWER_CONSTRAINT (1<<5)
1259 #define NETWORK_HAS_CSA (1<<6)
1260 #define NETWORK_HAS_QUIET (1<<7)
1261 #define NETWORK_HAS_IBSS_DFS (1<<8)
1262 #define NETWORK_HAS_TPC_REPORT (1<<9)
1264 #define NETWORK_HAS_ERP_VALUE (1<<10)
1266 #define QOS_QUEUE_NUM 4
1267 #define QOS_OUI_LEN 3
1268 #define QOS_OUI_TYPE 2
1269 #define QOS_ELEMENT_ID 221
1270 #define QOS_OUI_INFO_SUB_TYPE 0
1271 #define QOS_OUI_PARAM_SUB_TYPE 1
1272 #define QOS_VERSION_1 1
1273 #define QOS_AIFSN_MIN_VALUE 2
1274 struct ieee80211_qos_information_element
{
1277 u8 qui
[QOS_OUI_LEN
];
1282 } __attribute__ ((packed
));
1284 struct ieee80211_qos_ac_parameter
{
1288 } __attribute__ ((packed
));
1290 struct ieee80211_qos_parameter_info
{
1291 struct ieee80211_qos_information_element info_element
;
1293 struct ieee80211_qos_ac_parameter ac_params_record
[QOS_QUEUE_NUM
];
1294 } __attribute__ ((packed
));
1296 struct ieee80211_qos_parameters
{
1297 __le16 cw_min
[QOS_QUEUE_NUM
];
1298 __le16 cw_max
[QOS_QUEUE_NUM
];
1299 u8 aifs
[QOS_QUEUE_NUM
];
1300 u8 flag
[QOS_QUEUE_NUM
];
1301 __le16 tx_op_limit
[QOS_QUEUE_NUM
];
1302 } __attribute__ ((packed
));
1304 struct ieee80211_qos_data
{
1305 struct ieee80211_qos_parameters parameters
;
1312 struct ieee80211_tim_parameters
{
1315 } __attribute__ ((packed
));
1318 struct ieee80211_wmm_ac_param
{
1319 u8 ac_aci_acm_aifsn
;
1320 u8 ac_ecwmin_ecwmax
;
1324 struct ieee80211_wmm_ts_info
{
1328 } __attribute__ ((packed
));
1330 struct ieee80211_wmm_tspec_elem
{
1331 struct ieee80211_wmm_ts_info ts_info
;
1338 u32 serv_start_time
;
1345 u16 surp_band_allow
;
1347 }__attribute__((packed
));
1353 EAPOL_ENCAP_ASF_ALERT
1356 static const char *eap_types
[] = {
1357 [EAP_PACKET
] = "EAP-Packet",
1358 [EAPOL_START
] = "EAPOL-Start",
1359 [EAPOL_LOGOFF
] = "EAPOL-Logoff",
1360 [EAPOL_KEY
] = "EAPOL-Key",
1361 [EAPOL_ENCAP_ASF_ALERT
] = "EAPOL-Encap-ASF-Alert"
1364 static inline const char *eap_get_type(int type
)
1366 return ((u32
)type
>= ARRAY_SIZE(eap_types
)) ? "Unknown" : eap_types
[type
];
1368 //added by amy for reorder
1369 static inline u8
Frame_QoSTID(u8
* buf
)
1371 struct ieee80211_hdr_3addr
*hdr
;
1373 hdr
= (struct ieee80211_hdr_3addr
*)buf
;
1374 fc
= le16_to_cpu(hdr
->frame_ctl
);
1375 return (u8
)((frameqos
*)(buf
+ (((fc
& IEEE80211_FCTL_TODS
)&&(fc
& IEEE80211_FCTL_FROMDS
))? 30 : 24)))->field
.tid
;
1378 //added by amy for reorder
1386 } __attribute__ ((packed
));
1388 struct ieee80211_softmac_stats
{
1389 unsigned int rx_ass_ok
;
1390 unsigned int rx_ass_err
;
1391 unsigned int rx_probe_rq
;
1392 unsigned int tx_probe_rs
;
1393 unsigned int tx_beacons
;
1394 unsigned int rx_auth_rq
;
1395 unsigned int rx_auth_rs_ok
;
1396 unsigned int rx_auth_rs_err
;
1397 unsigned int tx_auth_rq
;
1398 unsigned int no_auth_rs
;
1399 unsigned int no_ass_rs
;
1400 unsigned int tx_ass_rq
;
1401 unsigned int rx_ass_rq
;
1402 unsigned int tx_probe_rq
;
1403 unsigned int reassoc
;
1404 unsigned int swtxstop
;
1405 unsigned int swtxawake
;
1406 unsigned char CurrentShowTxate
;
1407 unsigned char last_packet_rate
;
1408 unsigned int txretrycount
;
1411 #define BEACON_PROBE_SSID_ID_POSITION 12
1413 struct ieee80211_info_element_hdr
{
1416 } __attribute__ ((packed
));
1419 * These are the data types that can make up management packets
1423 u16 beacon_interval;
1425 u8 current_ap[ETH_ALEN];
1426 u16 listen_interval;
1428 u16 association_id:14, reserved:2;
1429 } __attribute__ ((packed));
1435 #define IEEE80211_DEFAULT_TX_ESSID "Penguin"
1436 #define IEEE80211_DEFAULT_BASIC_RATE 2 //1Mbps
1438 enum {WMM_all_frame
, WMM_two_frame
, WMM_four_frame
, WMM_six_frame
};
1439 #define MAX_SP_Len (WMM_all_frame << 4)
1440 #define IEEE80211_QOS_TID 0x0f
1441 #define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5)
1443 #define IEEE80211_DTIM_MBCAST 4
1444 #define IEEE80211_DTIM_UCAST 2
1445 #define IEEE80211_DTIM_VALID 1
1446 #define IEEE80211_DTIM_INVALID 0
1448 #define IEEE80211_PS_DISABLED 0
1449 #define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
1450 #define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
1452 //added by David for QoS 2006/6/30
1453 //#define WMM_Hang_8187
1454 #ifdef WMM_Hang_8187
1455 #undef WMM_Hang_8187
1458 #define WME_AC_BK 0x00
1459 #define WME_AC_BE 0x01
1460 #define WME_AC_VI 0x02
1461 #define WME_AC_VO 0x03
1462 #define WME_ACI_MASK 0x03
1463 #define WME_AIFSN_MASK 0x03
1464 #define WME_AC_PRAM_LEN 16
1466 #define MAX_RECEIVE_BUFFER_SIZE 9100
1468 //UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
1469 //#define UP2AC(up) ((up<3) ? ((up==0)?1:0) : (up>>1))
1470 #define UP2AC(up) ( \
1471 ((up) < 1) ? WME_AC_BE : \
1472 ((up) < 3) ? WME_AC_BK : \
1473 ((up) < 4) ? WME_AC_BE : \
1474 ((up) < 6) ? WME_AC_VI : \
1476 //AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
1477 #define AC2UP(_ac) ( \
1478 ((_ac) == WME_AC_VO) ? 6 : \
1479 ((_ac) == WME_AC_VI) ? 5 : \
1480 ((_ac) == WME_AC_BK) ? 1 : \
1483 #define ETHER_ADDR_LEN 6 /* length of an Ethernet address */
1484 #define ETHERNET_HEADER_SIZE 14 /* length of two Ethernet address plus ether type*/
1486 struct ether_header
{
1487 u8 ether_dhost
[ETHER_ADDR_LEN
];
1488 u8 ether_shost
[ETHER_ADDR_LEN
];
1490 } __attribute__((packed
));
1492 #ifndef ETHERTYPE_PAE
1493 #define ETHERTYPE_PAE 0x888e /* EAPOL PAE/802.1x */
1495 #ifndef ETHERTYPE_IP
1496 #define ETHERTYPE_IP 0x0800 /* IP protocol */
1499 typedef struct _bss_ht
{
1503 // HT related elements
1509 HT_SPEC_VER ht_spec_ver
;
1510 //HT_CAPABILITY_ELE bdHTCapEle;
1511 //HT_INFORMATION_ELE bdHTInfoEle;
1514 bool long_slot_time
;
1517 typedef enum _erp_t
{
1518 ERP_NonERPpresent
= 0x01,
1519 ERP_UseProtection
= 0x02,
1520 ERP_BarkerPreambleMode
= 0x04,
1524 struct ieee80211_network
{
1525 /* These entries are used to identify a unique network */
1528 /* Ensure null-terminated for any debug msgs */
1529 u8 ssid
[IW_ESSID_MAX_SIZE
+ 1];
1531 struct ieee80211_qos_data qos_data
;
1533 //added by amy for LEAP
1534 bool bWithAironetIE
;
1535 bool bCkipSupported
;
1538 // CCXv4 S59, MBSSID.
1542 // CCX 2 S38, WLAN Device Version Number element. Annie, 2006-08-20.
1543 bool bWithCcxVerNum
;
1545 /* These are network statistics */
1546 struct ieee80211_rx_stats stats
;
1548 u8 rates
[MAX_RATES_LENGTH
];
1550 u8 rates_ex
[MAX_RATES_EX_LENGTH
];
1552 unsigned long last_scanned
;
1557 u16 beacon_interval
;
1558 u16 listen_interval
;
1561 u8 wpa_ie
[MAX_WPA_IE_LEN
];
1563 u8 rsn_ie
[MAX_WPA_IE_LEN
];
1566 struct ieee80211_tim_parameters tim
;
1569 u32 last_dtim_sta_time
[2];
1573 struct ieee80211_wmm_ac_param wmm_param
[4];
1576 u8 Turbo_Enable
;//enable turbo mode, added by thomas
1578 #ifdef ENABLE_DOT11D
1580 u8 CountryIeBuf
[MAX_IE_LEN
];
1582 // HT Related, by amy, 2008.04.29
1584 // Add to handle broadcom AP management frame CCK rate.
1585 bool broadcom_cap_exist
;
1586 bool ralink_cap_exist
;
1587 bool atheros_cap_exist
;
1588 bool cisco_cap_exist
;
1589 bool marvell_cap_exist
;
1590 bool unknown_cap_exist
;
1592 bool berp_info_valid
;
1593 bool buseprotection
;
1594 //put at the end of the structure.
1595 struct list_head list
;
1598 enum ieee80211_state
{
1600 /* the card is not linked at all */
1601 IEEE80211_NOLINK
= 0,
1603 /* IEEE80211_ASSOCIATING* are for BSS client mode
1604 * the driver shall not perform RX filtering unless
1605 * the state is LINKED.
1606 * The driver shall just check for the state LINKED and
1607 * defaults to NOLINK for ALL the other states (including
1611 /* the association procedure will start (wq scheduling)*/
1612 IEEE80211_ASSOCIATING
,
1613 IEEE80211_ASSOCIATING_RETRY
,
1615 /* the association procedure is sending AUTH request*/
1616 IEEE80211_ASSOCIATING_AUTHENTICATING
,
1618 /* the association procedure has successfully authentcated
1619 * and is sending association request
1621 IEEE80211_ASSOCIATING_AUTHENTICATED
,
1623 /* the link is ok. the card associated to a BSS or linked
1624 * to a ibss cell or acting as an AP and creating the bss
1628 /* same as LINKED, but the driver shall apply RX filter
1629 * rules as we are in NO_LINK mode. As the card is still
1630 * logically linked, but it is doing a syncro site survey
1631 * then it will be back to LINKED state.
1633 IEEE80211_LINKED_SCANNING
,
1637 #define DEFAULT_MAX_SCAN_AGE (15 * HZ)
1638 #define DEFAULT_FTS 2346
1640 #define CFG_IEEE80211_RESERVE_FCS (1<<0)
1641 #define CFG_IEEE80211_COMPUTE_FCS (1<<1)
1642 #define CFG_IEEE80211_RTS (1<<2)
1644 #define IEEE80211_24GHZ_MIN_CHANNEL 1
1645 #define IEEE80211_24GHZ_MAX_CHANNEL 14
1646 #define IEEE80211_24GHZ_CHANNELS (IEEE80211_24GHZ_MAX_CHANNEL - \
1647 IEEE80211_24GHZ_MIN_CHANNEL + 1)
1649 #define IEEE80211_52GHZ_MIN_CHANNEL 34
1650 #define IEEE80211_52GHZ_MAX_CHANNEL 165
1651 #define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
1652 IEEE80211_52GHZ_MIN_CHANNEL + 1)
1654 typedef struct tx_pending_t
{
1656 struct ieee80211_txb
*txb
;
1659 typedef struct _bandwidth_autoswitch
1661 long threshold_20Mhzto40Mhz
;
1662 long threshold_40Mhzto20Mhz
;
1663 bool bforced_tx20Mhz
;
1664 bool bautoswitch_enable
;
1665 }bandwidth_autoswitch
,*pbandwidth_autoswitch
;
1668 //added by amy for order
1670 #define REORDER_WIN_SIZE 128
1671 #define REORDER_ENTRY_NUM 128
1672 typedef struct _RX_REORDER_ENTRY
1674 struct list_head List
;
1676 struct ieee80211_rxb
* prxb
;
1677 } RX_REORDER_ENTRY
, *PRX_REORDER_ENTRY
;
1678 //added by amy for order
1679 typedef enum _Fsync_State
{
1685 // Power save mode configured.
1686 typedef enum _RT_PS_MODE
1688 eActive
, // Active/Continuous access.
1689 eMaxPs
, // Max power save mode.
1690 eFastPs
// Fast power save mode.
1693 typedef enum _IPS_CALLBACK_FUNCION
1695 IPS_CALLBACK_NONE
= 0,
1696 IPS_CALLBACK_MGNT_LINK_REQUEST
= 1,
1697 IPS_CALLBACK_JOIN_REQUEST
= 2,
1698 }IPS_CALLBACK_FUNCION
;
1700 typedef enum _RT_JOIN_ACTION
{
1707 typedef struct _IbssParms
{
1709 }IbssParms
, *PIbssParms
;
1710 #define MAX_NUM_RATES 264 // Max num of support rates element: 8, Max num of ext. support rate: 255. 061122, by rcnjko.
1713 typedef enum _RT_RF_POWER_STATE
1720 typedef struct _RT_POWER_SAVE_CONTROL
1724 // Inactive Power Save(IPS) : Disable RF when disconnected
1727 bool bIPSModeBackup
;
1728 bool bSwRfProcessing
;
1729 RT_RF_POWER_STATE eInactivePowerState
;
1730 struct work_struct InactivePsWorkItem
;
1731 struct timer_list InactivePsTimer
;
1733 // Return point for join action
1734 IPS_CALLBACK_FUNCION ReturnPoint
;
1736 // Recored Parameters for rescheduled JoinRequest
1738 RT_JOIN_ACTION tmpJoinAction
;
1739 struct ieee80211_network tmpBssDesc
;
1741 // Recored Parameters for rescheduled MgntLinkRequest
1743 bool bTmpActiveScan
;
1744 bool bTmpFilterHiddenAP
;
1745 bool bTmpUpdateParms
;
1747 OCTET_STRING tmpSsid2Scan
;
1750 u8 tmpChannelNumber
;
1754 OCTET_STRING tmpSuppRateSet
;
1755 u8 tmpSuppRateBuf
[MAX_NUM_RATES
];
1761 // Leisre Poswer Save : Disable RF if connected but traffic is not busy
1766 u8 RegMaxLPSAwakeIntvl
;
1775 bool LinkReqInIPSRFOffPgs
;
1776 bool BufConnectinfoBefore
;
1778 }RT_POWER_SAVE_CONTROL
,*PRT_POWER_SAVE_CONTROL
;
1780 typedef u32 RT_RF_CHANGE_SOURCE
;
1781 #define RF_CHANGE_BY_SW BIT31
1782 #define RF_CHANGE_BY_HW BIT30
1783 #define RF_CHANGE_BY_PS BIT29
1784 #define RF_CHANGE_BY_IPS BIT28
1785 #define RF_CHANGE_BY_INIT 0 // Do not change the RFOff reason. Defined by Bruce, 2008-01-17.
1787 #ifdef ENABLE_DOT11D
1790 COUNTRY_CODE_FCC
= 0,
1791 COUNTRY_CODE_IC
= 1,
1792 COUNTRY_CODE_ETSI
= 2,
1793 COUNTRY_CODE_SPAIN
= 3,
1794 COUNTRY_CODE_FRANCE
= 4,
1795 COUNTRY_CODE_MKK
= 5,
1796 COUNTRY_CODE_MKK1
= 6,
1797 COUNTRY_CODE_ISRAEL
= 7,
1800 COUNTRY_CODE_GLOBAL_DOMAIN
1801 }country_code_type_t
;
1804 #define RT_MAX_LD_SLOT_NUM 10
1805 typedef struct _RT_LINK_DETECT_T
{
1807 u32 NumRecvBcnInPeriod
;
1808 u32 NumRecvDataInPeriod
;
1810 u32 RxBcnNum
[RT_MAX_LD_SLOT_NUM
]; // number of Rx beacon / CheckForHang_period to determine link status
1811 u32 RxDataNum
[RT_MAX_LD_SLOT_NUM
]; // number of Rx data / CheckForHang_period to determine link status
1812 u16 SlotNum
; // number of CheckForHang period to determine link status
1815 u32 NumTxOkInPeriod
;
1816 u32 NumRxOkInPeriod
;
1817 u32 NumRxUnicastOkInPeriod
;
1819 }RT_LINK_DETECT_T
, *PRT_LINK_DETECT_T
;
1821 //added by amy 090330
1822 typedef enum _HW_VARIABLES
{
1824 HW_VAR_MULTICAST_REG
,
1827 HW_VAR_MEDIA_STATUS
,
1828 HW_VAR_SECURITY_CONF
,
1829 HW_VAR_BEACON_INTERVAL
,
1831 HW_VAR_LISTEN_INTERVAL
,
1841 HW_VAR_ACK_PREAMBLE
,
1844 HW_VAR_RATE_FALLBACK_CONTROL
,
1845 HW_VAR_CONTENTION_WINDOW
,
1848 HW_VAR_COMMAND
, // For Command Register, Annie, 2006-04-07.
1849 HW_VAR_WPA_CONFIG
, //2004/08/23, kcwu, for 8187 Security config
1850 HW_VAR_AMPDU_MIN_SPACE
, // The spacing between sub-frame. Roger, 2008.07.04.
1851 HW_VAR_SHORTGI_DENSITY
, // The density for shortGI. Roger, 2008.07.04.
1852 HW_VAR_AMPDU_FACTOR
,
1853 HW_VAR_MCS_RATE_AVAILABLE
,
1854 HW_VAR_AC_PARAM
, // For AC Parameters, 2005.12.01, by rcnjko.
1855 HW_VAR_ACM_CTRL
, // For ACM Control, Annie, 2005-12-13.
1856 HW_VAR_DIS_Req_Qsize
, // For DIS_Reg_Qsize, Joseph
1857 HW_VAR_CCX_CHNL_LOAD
, // For CCX 2 channel load request, 2006.05.04.
1858 HW_VAR_CCX_NOISE_HISTOGRAM
, // For CCX 2 noise histogram request, 2006.05.04.
1859 HW_VAR_CCX_CLM_NHM
, // For CCX 2 parallel channel load request and noise histogram request, 2006.05.12.
1860 HW_VAR_TxOPLimit
, // For turbo mode related settings, added by Roger, 2006.12.07
1861 HW_VAR_TURBO_MODE
, // For turbo mode related settings, added by Roger, 2006.12.15.
1862 HW_VAR_RF_STATE
, // For change or query RF power state, 061214, rcnjko.
1863 HW_VAR_RF_OFF_BY_HW
, // For UI to query if external HW signal disable RF, 061229, rcnjko.
1864 HW_VAR_BUS_SPEED
, // In unit of bps. 2006.07.03, by rcnjko.
1865 HW_VAR_SET_DEV_POWER
, // Set to low power, added by LanHsin, 2007.
1867 //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
1868 //1Attention Please!!!<11n or 8190 specific code should be put below this line>
1869 //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
1870 HW_VAR_RCR
, //for RCR, David 2006,05,11
1875 HW_VAR_LBK_MODE
, // Set lookback mode, 2008.06.11. added by Roger.
1876 // Set HW related setting for 11N AES bug.
1878 // Set Usb Rx Aggregation
1880 HW_VAR_USER_CONTROL_TURBO_MODE
,
1882 #ifndef _RTL8192_EXT_PATCH_
1883 HW_VAR_INIT_TX_RATE
, //Get Current Tx rate register. 2008.12.10. Added by tynli
1885 HW_VAR_TX_RATE_REG
, //Get Current Tx rate register. 2008.12.10. Added by tynli
1886 HW_VAR_EFUSE_USAGE
, //Get current EFUSE utilization. 2008.12.19. Added by Roger.
1888 HW_VAR_AUTOLOAD_STATUS
, //Get current autoload status, 0: autoload success, 1: autoload fail. 2008.12.19. Added by Roger.
1889 HW_VAR_RF_2R_DISABLE
, // 2R disable
1891 HW_VAR_H2C_FW_PWRMODE
, // For setting FW related H2C cmd structure. by tynli. 2009.2.18
1892 HW_VAR_H2C_FW_JOINBSSRPT
, // For setting FW related H2C cmd structure. by tynli. 2009.2.18
1893 HW_VAR_1X1_RECV_COMBINE
, // For 1T2R but only 1SS, Add by hpfan 2009.04.16 hpfan
1894 HW_VAR_STOP_SEND_BEACON
,
1895 HW_VAR_TSF_TIMER
, // Read from TSF register to get the current TSF timer, by Bruce, 2009-07-22.
1897 HW_VAR_HANDLE_FW_C2H
, //Added by tynli. For handling FW C2H command. 2009.10.07.
1898 HW_VAR_DL_FW_RSVD_PAGE
, //Added by tynli. Download the packets that FW will use to RSVD page. 2009.10.14.
1899 HW_VAR_AID
, //Added by tynli.
1900 HW_VAR_HW_SEQ_ENABLE
, //Added by tynli. 2009.10.20.
1901 HW_VAR_UPDATE_TSF
, //Added by tynli. 2009.10.22. For Hw count TBTT time.
1902 HW_VAR_BCN_VALID
, //Added by tynli.
1903 HW_VAR_FWLPS_RF_ON
//Added by tynli. 2009.11.09. For checking if Fw finishs RF on sequence.
1906 #define RT_CHECK_FOR_HANG_PERIOD 2
1908 struct ieee80211_device
{
1909 struct net_device
*dev
;
1910 struct ieee80211_security sec
;
1916 bool bIsAggregateFrame
;
1918 void (*LeisurePSLeave
)(struct net_device
*dev
);
1922 bool proto_stoppping
;
1924 struct semaphore ips_sem
;
1925 struct work_struct ips_leave_wq
;
1926 void (*ieee80211_ips_leave_wq
) (struct net_device
*dev
);
1927 void (*ieee80211_ips_leave
)(struct net_device
*dev
);
1929 void (*SetHwRegHandler
)(struct net_device
*dev
,u8 variable
,u8
* val
);
1930 u8 (*rtllib_ap_sec_type
)(struct ieee80211_device
*ieee
);
1932 //hw security related
1933 // u8 hwsec_support; //support?
1934 u8 hwsec_active
; //hw security active.
1935 bool is_silent_reset
;
1939 bool bSupportRemoteWakeUp
;
1940 RT_PS_MODE dot11PowerSaveMode
; // Power save mode configured.
1943 RT_RF_POWER_STATE eRFPowerState
;
1944 RT_RF_CHANGE_SOURCE RfOffReason
;
1946 //11n spec related I wonder if These info structure need to be moved out of ieee80211_device
1949 PRT_HIGH_THROUGHPUT pHTInfo
;
1950 //struct timer_list SwBwTimer;
1951 // spinlock_t chnlop_spinlock;
1952 spinlock_t bw_spinlock
;
1954 spinlock_t reorder_spinlock
;
1955 // for HT operation rate set. we use this one for HT data rate to separate different descriptors
1956 //the way fill this is the same as in the IE
1957 u8 Regdot11HTOperationalRateSet
[16]; //use RATR format
1958 u8 dot11HTOperationalRateSet
[16]; //use RATR format
1959 u8 RegHTSuppRateSet
[16];
1960 u8 HTCurrentOperaRate
;
1961 u8 HTHighestOperaRate
;
1962 //wb added for rate operation mode to firmware
1963 u8 bTxDisableRateFallBack
;
1964 u8 bTxUseDriverAssingedRate
;
1965 atomic_t atm_chnlop
;
1967 // u8 HTHighestOperaRate;
1968 // u8 HTCurrentOperaRate;
1970 // 802.11e and WMM Traffic Stream Info (TX)
1971 struct list_head Tx_TS_Admit_List
;
1972 struct list_head Tx_TS_Pending_List
;
1973 struct list_head Tx_TS_Unused_List
;
1974 TX_TS_RECORD TxTsRecord
[TOTAL_TS_NUM
];
1975 // 802.11e and WMM Traffic Stream Info (RX)
1976 struct list_head Rx_TS_Admit_List
;
1977 struct list_head Rx_TS_Pending_List
;
1978 struct list_head Rx_TS_Unused_List
;
1979 RX_TS_RECORD RxTsRecord
[TOTAL_TS_NUM
];
1981 RX_REORDER_ENTRY RxReorderEntry
[128];
1982 struct list_head RxReorder_Unused_List
;
1984 // Qos related. Added by Annie, 2005-11-01.
1985 // PSTA_QOS pStaQos;
1986 u8 ForcedPriority
; // Force per-packet priority 1~7. (default: 0, not to force it.)
1989 /* Bookkeeping structures */
1990 struct net_device_stats stats
;
1991 struct ieee80211_stats ieee_stats
;
1992 struct ieee80211_softmac_stats softmac_stats
;
1994 /* Probe / Beacon management */
1995 struct list_head network_free_list
;
1996 struct list_head network_list
;
1997 struct ieee80211_network
*networks
;
2001 int iw_mode
; /* operating mode (IW_MODE_*) */
2002 struct iw_spy_data spy_data
;
2005 spinlock_t wpax_suitlist_lock
;
2007 int tx_headroom
; /* Set to size of any additional room needed at front
2008 * of allocated Tx SKBs */
2011 /* WEP and other encryption related settings at the device level */
2012 int open_wep
; /* Set to 1 to allow unencrypted frames */
2014 int reset_on_keychange
; /* Set to 1 if the HW needs to be reset on
2015 * WEP key changes */
2017 /* If the host performs {en,de}cryption, then set to 1 */
2019 int host_encrypt_msdu
;
2021 /* host performs multicast decryption */
2022 int host_mc_decrypt
;
2024 /* host should strip IV and ICV from protected frames */
2025 /* meaningful only when hardware decryption is being used */
2026 int host_strip_iv_icv
;
2030 int ieee802_1x
; /* is IEEE 802.1X used */
2033 bool bHalfWirelessN24GMode
;
2035 int drop_unencrypted
;
2036 int tkip_countermeasures
;
2037 int privacy_invoked
;
2041 u16 pairwise_key_type
;
2043 struct list_head crypt_deinit_list
;
2044 struct ieee80211_crypt_data
*crypt
[WEP_KEYS
];
2045 int tx_keyidx
; /* default TX key index (crypt[tx_keyidx]) */
2046 struct timer_list crypt_deinit_timer
;
2049 int bcrx_sta_key
; /* use individual keys to override default keys even
2050 * with RX of broad/multicast frames */
2052 /* Fragmentation structures */
2053 // each streaming contain a entry
2054 struct ieee80211_frag_entry frag_cache
[17][IEEE80211_FRAG_CACHE_LEN
];
2055 unsigned int frag_next_idx
[17];
2056 u16 fts
; /* Fragmentation Threshold */
2057 #define DEFAULT_RTS_THRESHOLD 2346U
2058 #define MIN_RTS_THRESHOLD 1
2059 #define MAX_RTS_THRESHOLD 2346U
2060 u16 rts
; /* RTS threshold */
2062 /* Association info */
2065 /* This stores infos for the current network.
2066 * Either the network we are associated in INFRASTRUCTURE
2067 * or the network that we are creating in MASTER mode.
2068 * ad-hoc is a mixture ;-).
2069 * Note that in infrastructure mode, even when not associated,
2070 * fields bssid and essid may be valid (if wpa_set and essid_set
2071 * are true) as thy carry the value set by the user via iwconfig
2073 struct ieee80211_network current_network
;
2075 enum ieee80211_state state
;
2079 int mode
; /* A, B, G */
2080 int modulation
; /* CCK, OFDM */
2081 int freq_band
; /* 2.4Ghz, 5.2Ghz, Mixed */
2082 int abg_true
; /* ABG flag */
2084 /* used for forcing the ibss workqueue to terminate
2085 * without wait for the syncro scan to terminate
2087 short sync_scan_hurryup
;
2092 u16 prev_seq_ctl
; /* used to drop duplicate frames */
2094 /* map of allowed channels. 0 is dummy */
2095 #ifdef ENABLE_DOT11D
2099 int channel_map
[MAX_CHANNEL_NUMBER
+1];
2101 int rate
; /* current rate */
2105 /* this contains flags for selectively enable softmac support */
2106 u16 softmac_features
;
2108 /* if the sequence control field is not filled by HW */
2111 /* association procedure transaction sequence number */
2114 /* AID for RTXed association responses */
2117 /* power save mode related*/
2123 struct tasklet_struct ps_task
;
2128 /* used if IEEE_SOFTMAC_TX_QUEUE is set */
2131 short proto_started
;
2133 struct semaphore wx_sem
;
2134 struct semaphore scan_sem
;
2136 spinlock_t mgmt_tx_lock
;
2137 spinlock_t beacon_lock
;
2144 u8 wpax_type_set
; //{added by David, 2006.9.28}
2145 u32 wpax_type_notify
; //{added by David, 2006.9.26}
2147 /* QoS related flag */
2148 char init_wmmparam_flag
;
2149 /* set on initialization */
2152 /* for discarding duplicated packets in IBSS */
2153 struct list_head ibss_mac_hash
[IEEE_IBSS_MAC_HASH_SIZE
];
2155 /* for discarding duplicated packets in BSS */
2156 u16 last_rxseq_num
[17]; /* rx seq previous per-tid */
2157 u16 last_rxfrag_num
[17];/* tx frag previous per-tid */
2158 unsigned long last_packet_time
[17];
2161 unsigned long last_rx_ps_time
;
2163 /* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */
2164 struct sk_buff
*mgmt_queue_ring
[MGMT_QUEUE_NUM
];
2165 int mgmt_queue_head
;
2166 int mgmt_queue_tail
;
2167 //{ added for rtl819x
2168 #define IEEE80211_QUEUE_LIMIT 128
2170 unsigned int hw_header
;
2171 struct sk_buff_head skb_waitQ
[MAX_QUEUE_SIZE
];
2172 struct sk_buff_head skb_aggQ
[MAX_QUEUE_SIZE
];
2173 struct sk_buff_head skb_drv_aggQ
[MAX_QUEUE_SIZE
];
2174 u32 sta_edca_param
[4];
2176 // Enable/Disable Rx immediate BA capability.
2177 bool enable_rx_imm_BA
;
2178 bool bibsscoordinator
;
2180 //+by amy for DM ,080515
2181 //Dynamic Tx power for near/far range enable/Disable , by amy , 2008-05-15
2182 bool bdynamic_txpower_enable
;
2184 bool bCTSToSelfEnable
;
2187 u32 fsync_time_interval
;
2188 u32 fsync_rate_bitmap
;
2189 u8 fsync_rssi_threshold
;
2192 u8 fsync_multiple_timeinterval
; // FsyncMultipleTimeInterval * FsyncTimeInterval
2193 u32 fsync_firstdiff_ratethreshold
; // low threshold
2194 u32 fsync_seconddiff_ratethreshold
; // decrease threshold
2195 Fsync_State fsync_state
;
2196 bool bis_any_nonbepkts
;
2197 //20Mhz 40Mhz AutoSwitch Threshold
2198 bandwidth_autoswitch bandwidth_auto_switch
;
2199 //for txpower tracking
2202 //added by amy for AP roaming
2203 RT_LINK_DETECT_T LinkDetectInfo
;
2204 //added by amy for ps
2205 RT_POWER_SAVE_CONTROL PowerSaveControl
;
2207 /* used if IEEE_SOFTMAC_TX_QUEUE is set */
2208 struct tx_pending_t tx_pending
;
2210 /* used if IEEE_SOFTMAC_ASSOCIATE is set */
2211 struct timer_list associate_timer
;
2213 /* used if IEEE_SOFTMAC_BEACONS is set */
2214 struct timer_list beacon_timer
;
2215 struct work_struct associate_complete_wq
;
2216 struct work_struct associate_procedure_wq
;
2217 struct delayed_work softmac_scan_wq
;
2218 struct delayed_work associate_retry_wq
;
2219 struct delayed_work start_ibss_wq
;
2220 struct delayed_work hw_wakeup_wq
;
2221 struct delayed_work hw_sleep_wq
;
2223 struct work_struct wx_sync_scan_wq
;
2224 struct workqueue_struct
*wq
;
2225 // Qos related. Added by Annie, 2005-11-01.
2228 //u32 STA_EDCA_PARAM[4];
2229 //CHANNEL_ACCESS_SETTING ChannelAccessSetting;
2232 /* Callback functions */
2233 void (*set_security
)(struct net_device
*dev
,
2234 struct ieee80211_security
*sec
);
2236 /* Used to TX data frame by using txb structs.
2237 * this is not used if in the softmac_features
2238 * is set the flag IEEE_SOFTMAC_TX_QUEUE
2240 int (*hard_start_xmit
)(struct ieee80211_txb
*txb
,
2241 struct net_device
*dev
);
2243 int (*reset_port
)(struct net_device
*dev
);
2244 int (*is_queue_full
) (struct net_device
* dev
, int pri
);
2246 int (*handle_management
) (struct net_device
* dev
,
2247 struct ieee80211_network
* network
, u16 type
);
2248 int (*is_qos_active
) (struct net_device
*dev
, struct sk_buff
*skb
);
2250 /* Softmac-generated frames (mamagement) are TXed via this
2251 * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
2252 * not set. As some cards may have different HW queues that
2253 * one might want to use for data and management frames
2254 * the option to have two callbacks might be useful.
2255 * This fucntion can't sleep.
2257 int (*softmac_hard_start_xmit
)(struct sk_buff
*skb
,
2258 struct net_device
*dev
);
2260 /* used instead of hard_start_xmit (not softmac_hard_start_xmit)
2261 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
2262 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
2263 * then also management frames are sent via this callback.
2264 * This function can't sleep.
2266 void (*softmac_data_hard_start_xmit
)(struct sk_buff
*skb
,
2267 struct net_device
*dev
,int rate
);
2269 /* stops the HW queue for DATA frames. Useful to avoid
2270 * waste time to TX data frame when we are reassociating
2271 * This function can sleep.
2273 void (*data_hard_stop
)(struct net_device
*dev
);
2275 /* OK this is complementar to data_poll_hard_stop */
2276 void (*data_hard_resume
)(struct net_device
*dev
);
2278 /* ask to the driver to retune the radio .
2279 * This function can sleep. the driver should ensure
2280 * the radio has been swithced before return.
2282 void (*set_chan
)(struct net_device
*dev
,short ch
);
2284 /* These are not used if the ieee stack takes care of
2285 * scanning (IEEE_SOFTMAC_SCAN feature set).
2286 * In this case only the set_chan is used.
2288 * The syncro version is similar to the start_scan but
2289 * does not return until all channels has been scanned.
2290 * this is called in user context and should sleep,
2291 * it is called in a work_queue when swithcing to ad-hoc mode
2292 * or in behalf of iwlist scan when the card is associated
2293 * and root user ask for a scan.
2294 * the fucntion stop_scan should stop both the syncro and
2295 * background scanning and can sleep.
2296 * The fucntion start_scan should initiate the background
2297 * scanning and can't sleep.
2299 void (*scan_syncro
)(struct net_device
*dev
);
2300 void (*start_scan
)(struct net_device
*dev
);
2301 void (*stop_scan
)(struct net_device
*dev
);
2303 /* indicate the driver that the link state is changed
2304 * for example it may indicate the card is associated now.
2305 * Driver might be interested in this to apply RX filter
2306 * rules or simply light the LINK led
2308 void (*link_change
)(struct net_device
*dev
);
2310 /* these two function indicates to the HW when to start
2311 * and stop to send beacons. This is used when the
2312 * IEEE_SOFTMAC_BEACONS is not set. For now the
2313 * stop_send_bacons is NOT guaranteed to be called only
2314 * after start_send_beacons.
2316 void (*start_send_beacons
) (struct net_device
*dev
);
2317 void (*stop_send_beacons
) (struct net_device
*dev
);
2319 /* power save mode related */
2320 void (*sta_wake_up
) (struct net_device
*dev
);
2321 // void (*ps_request_tx_ack) (struct net_device *dev);
2322 void (*enter_sleep_state
) (struct net_device
*dev
, u32 th
, u32 tl
);
2323 short (*ps_is_queue_empty
) (struct net_device
*dev
);
2324 int (*handle_beacon
) (struct net_device
* dev
, struct ieee80211_beacon
* beacon
, struct ieee80211_network
* network
);
2325 int (*handle_assoc_response
) (struct net_device
* dev
, struct ieee80211_assoc_response_frame
* resp
, struct ieee80211_network
* network
);
2328 /* check whether Tx hw resouce available */
2329 short (*check_nic_enough_desc
)(struct net_device
*dev
, int queue_index
);
2330 //added by wb for HT related
2331 // void (*SwChnlByTimerHandler)(struct net_device *dev, int channel);
2332 void (*SetBWModeHandler
)(struct net_device
*dev
, HT_CHANNEL_WIDTH Bandwidth
, HT_EXTCHNL_OFFSET Offset
);
2333 // void (*UpdateHalRATRTableHandler)(struct net_device* dev, u8* pMcsRate);
2334 bool (*GetNmodeSupportBySecCfg
)(struct net_device
* dev
);
2335 void (*SetWirelessMode
)(struct net_device
* dev
, u8 wireless_mode
);
2336 bool (*GetHalfNmodeSupportByAPsHandler
)(struct net_device
* dev
);
2337 void (*InitialGainHandler
)(struct net_device
*dev
, u8 Operation
);
2339 /* This must be the last item so that it points to the data
2340 * allocated beyond this structure by alloc_ieee80211 */
2344 #define RT_RF_OFF_LEVL_ASPM BIT0 // PCI ASPM
2345 #define RT_RF_OFF_LEVL_CLK_REQ BIT1 // PCI clock request
2346 #define RT_RF_OFF_LEVL_PCI_D3 BIT2 // PCI D3 mode
2347 #define RT_RF_OFF_LEVL_HALT_NIC BIT3 // NIC halt, re-initialize hw parameters
2348 #define RT_RF_OFF_LEVL_FREE_FW BIT4 // FW free, re-download the FW
2349 #define RT_RF_OFF_LEVL_FW_32K BIT5 // FW in 32k
2350 #define RT_RF_PS_LEVEL_ALWAYS_ASPM BIT6 // Always enable ASPM and Clock Req in initialization.
2351 #define RT_RF_LPS_DISALBE_2R BIT30 // When LPS is on, disable 2R if no packet is received or transmittd.
2352 #define RT_RF_LPS_LEVEL_ASPM BIT31 // LPS with ASPM
2353 #define RT_IN_PS_LEVEL(pPSC, _PS_FLAG) ((pPSC->CurPsLevel & _PS_FLAG) ? true : false)
2354 #define RT_CLEAR_PS_LEVEL(pPSC, _PS_FLAG) (pPSC->CurPsLevel &= (~(_PS_FLAG)))
2355 #define RT_SET_PS_LEVEL(pPSC, _PS_FLAG) (pPSC->CurPsLevel |= _PS_FLAG)
2357 #define IEEE_A (1<<0)
2358 #define IEEE_B (1<<1)
2359 #define IEEE_G (1<<2)
2360 #define IEEE_N_24G (1<<4)
2361 #define IEEE_N_5G (1<<5)
2362 #define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G)
2364 /* Generate a 802.11 header */
2366 /* Uses the channel change callback directly
2367 * instead of [start/stop] scan callbacks
2369 #define IEEE_SOFTMAC_SCAN (1<<2)
2371 /* Perform authentication and association handshake */
2372 #define IEEE_SOFTMAC_ASSOCIATE (1<<3)
2374 /* Generate probe requests */
2375 #define IEEE_SOFTMAC_PROBERQ (1<<4)
2377 /* Generate respones to probe requests */
2378 #define IEEE_SOFTMAC_PROBERS (1<<5)
2380 /* The ieee802.11 stack will manages the netif queue
2381 * wake/stop for the driver, taking care of 802.11
2382 * fragmentation. See softmac.c for details. */
2383 #define IEEE_SOFTMAC_TX_QUEUE (1<<7)
2385 /* Uses only the softmac_data_hard_start_xmit
2386 * even for TX management frames.
2388 #define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
2390 /* Generate beacons. The stack will enqueue beacons
2393 #define IEEE_SOFTMAC_BEACONS (1<<6)
2395 static inline void *ieee80211_priv(struct net_device
*dev
)
2397 return ((struct ieee80211_device
*)netdev_priv(dev
))->priv
;
2400 extern inline int ieee80211_is_empty_essid(const char *essid
, int essid_len
)
2402 /* Single white space is for Linksys APs */
2403 if (essid_len
== 1 && essid
[0] == ' ')
2406 /* Otherwise, if the entire essid is 0, we assume it is hidden */
2409 if (essid
[essid_len
] != '\0')
2416 extern inline int ieee80211_is_valid_mode(struct ieee80211_device
*ieee
, int mode
)
2419 * It is possible for both access points and our device to support
2420 * combinations of modes, so as long as there is one valid combination
2421 * of ap/device supported modes, then return success
2424 if ((mode
& IEEE_A
) &&
2425 (ieee
->modulation
& IEEE80211_OFDM_MODULATION
) &&
2426 (ieee
->freq_band
& IEEE80211_52GHZ_BAND
))
2429 if ((mode
& IEEE_G
) &&
2430 (ieee
->modulation
& IEEE80211_OFDM_MODULATION
) &&
2431 (ieee
->freq_band
& IEEE80211_24GHZ_BAND
))
2434 if ((mode
& IEEE_B
) &&
2435 (ieee
->modulation
& IEEE80211_CCK_MODULATION
) &&
2436 (ieee
->freq_band
& IEEE80211_24GHZ_BAND
))
2442 extern inline int ieee80211_get_hdrlen(u16 fc
)
2444 int hdrlen
= IEEE80211_3ADDR_LEN
;
2446 switch (WLAN_FC_GET_TYPE(fc
)) {
2447 case IEEE80211_FTYPE_DATA
:
2448 if ((fc
& IEEE80211_FCTL_FROMDS
) && (fc
& IEEE80211_FCTL_TODS
))
2449 hdrlen
= IEEE80211_4ADDR_LEN
; /* Addr4 */
2450 if(IEEE80211_QOS_HAS_SEQ(fc
))
2451 hdrlen
+= 2; /* QOS ctrl*/
2453 case IEEE80211_FTYPE_CTL
:
2454 switch (WLAN_FC_GET_STYPE(fc
)) {
2455 case IEEE80211_STYPE_CTS
:
2456 case IEEE80211_STYPE_ACK
:
2457 hdrlen
= IEEE80211_1ADDR_LEN
;
2460 hdrlen
= IEEE80211_2ADDR_LEN
;
2469 static inline u8
*ieee80211_get_payload(struct ieee80211_hdr
*hdr
)
2471 switch (ieee80211_get_hdrlen(le16_to_cpu(hdr
->frame_ctl
))) {
2472 case IEEE80211_1ADDR_LEN
:
2473 return ((struct ieee80211_hdr_1addr
*)hdr
)->payload
;
2474 case IEEE80211_2ADDR_LEN
:
2475 return ((struct ieee80211_hdr_2addr
*)hdr
)->payload
;
2476 case IEEE80211_3ADDR_LEN
:
2477 return ((struct ieee80211_hdr_3addr
*)hdr
)->payload
;
2478 case IEEE80211_4ADDR_LEN
:
2479 return ((struct ieee80211_hdr_4addr
*)hdr
)->payload
;
2484 static inline int ieee80211_is_ofdm_rate(u8 rate
)
2486 switch (rate
& ~IEEE80211_BASIC_RATE_MASK
) {
2487 case IEEE80211_OFDM_RATE_6MB
:
2488 case IEEE80211_OFDM_RATE_9MB
:
2489 case IEEE80211_OFDM_RATE_12MB
:
2490 case IEEE80211_OFDM_RATE_18MB
:
2491 case IEEE80211_OFDM_RATE_24MB
:
2492 case IEEE80211_OFDM_RATE_36MB
:
2493 case IEEE80211_OFDM_RATE_48MB
:
2494 case IEEE80211_OFDM_RATE_54MB
:
2500 static inline int ieee80211_is_cck_rate(u8 rate
)
2502 switch (rate
& ~IEEE80211_BASIC_RATE_MASK
) {
2503 case IEEE80211_CCK_RATE_1MB
:
2504 case IEEE80211_CCK_RATE_2MB
:
2505 case IEEE80211_CCK_RATE_5MB
:
2506 case IEEE80211_CCK_RATE_11MB
:
2514 extern void free_ieee80211(struct net_device
*dev
);
2515 extern struct net_device
*alloc_ieee80211(int sizeof_priv
);
2517 extern int ieee80211_set_encryption(struct ieee80211_device
*ieee
);
2519 /* ieee80211_tx.c */
2521 extern int ieee80211_encrypt_fragment(
2522 struct ieee80211_device
*ieee
,
2523 struct sk_buff
*frag
,
2526 extern int ieee80211_rtl_xmit(struct sk_buff
*skb
,
2527 struct net_device
*dev
);
2528 extern void ieee80211_txb_free(struct ieee80211_txb
*);
2531 /* ieee80211_rx.c */
2532 extern int ieee80211_rtl_rx(struct ieee80211_device
*ieee
, struct sk_buff
*skb
,
2533 struct ieee80211_rx_stats
*rx_stats
);
2534 extern void ieee80211_rx_mgt(struct ieee80211_device
*ieee
,
2535 struct ieee80211_hdr_4addr
*header
,
2536 struct ieee80211_rx_stats
*stats
);
2538 /* ieee80211_wx.c */
2539 extern int ieee80211_wx_get_scan(struct ieee80211_device
*ieee
,
2540 struct iw_request_info
*info
,
2541 union iwreq_data
*wrqu
, char *key
);
2542 extern int ieee80211_wx_set_encode(struct ieee80211_device
*ieee
,
2543 struct iw_request_info
*info
,
2544 union iwreq_data
*wrqu
, char *key
);
2545 extern int ieee80211_wx_get_encode(struct ieee80211_device
*ieee
,
2546 struct iw_request_info
*info
,
2547 union iwreq_data
*wrqu
, char *key
);
2548 #if WIRELESS_EXT >= 18
2549 extern int ieee80211_wx_get_encode_ext(struct ieee80211_device
*ieee
,
2550 struct iw_request_info
*info
,
2551 union iwreq_data
* wrqu
, char *extra
);
2552 extern int ieee80211_wx_set_encode_ext(struct ieee80211_device
*ieee
,
2553 struct iw_request_info
*info
,
2554 union iwreq_data
* wrqu
, char *extra
);
2555 extern int ieee80211_wx_set_auth(struct ieee80211_device
*ieee
,
2556 struct iw_request_info
*info
,
2557 struct iw_param
*data
, char *extra
);
2558 extern int ieee80211_wx_set_mlme(struct ieee80211_device
*ieee
,
2559 struct iw_request_info
*info
,
2560 union iwreq_data
*wrqu
, char *extra
);
2562 extern int ieee80211_wx_set_gen_ie(struct ieee80211_device
*ieee
, u8
*ie
, size_t len
);
2564 /* ieee80211_softmac.c */
2565 extern short ieee80211_is_54g(struct ieee80211_network net
);
2566 extern short ieee80211_is_shortslot(struct ieee80211_network net
);
2567 extern int ieee80211_rx_frame_softmac(struct ieee80211_device
*ieee
, struct sk_buff
*skb
,
2568 struct ieee80211_rx_stats
*rx_stats
, u16 type
,
2570 extern void ieee80211_softmac_new_net(struct ieee80211_device
*ieee
, struct ieee80211_network
*net
);
2572 void SendDisassociation(struct ieee80211_device
*ieee
, u8
* asSta
, u8 asRsn
);
2573 extern void ieee80211_softmac_xmit(struct ieee80211_txb
*txb
, struct ieee80211_device
*ieee
);
2575 extern void ieee80211_stop_send_beacons(struct ieee80211_device
*ieee
);
2576 extern void notify_wx_assoc_event(struct ieee80211_device
*ieee
);
2577 extern void ieee80211_softmac_check_all_nets(struct ieee80211_device
*ieee
);
2578 extern void ieee80211_start_bss(struct ieee80211_device
*ieee
);
2579 extern void ieee80211_start_master_bss(struct ieee80211_device
*ieee
);
2580 extern void ieee80211_start_ibss(struct ieee80211_device
*ieee
);
2581 extern void ieee80211_softmac_init(struct ieee80211_device
*ieee
);
2582 extern void ieee80211_softmac_free(struct ieee80211_device
*ieee
);
2583 extern void ieee80211_associate_abort(struct ieee80211_device
*ieee
);
2584 extern void ieee80211_disassociate(struct ieee80211_device
*ieee
);
2585 extern void ieee80211_stop_scan(struct ieee80211_device
*ieee
);
2586 extern void ieee80211_start_scan_syncro(struct ieee80211_device
*ieee
);
2587 extern void ieee80211_check_all_nets(struct ieee80211_device
*ieee
);
2588 extern void ieee80211_start_protocol(struct ieee80211_device
*ieee
);
2589 extern void ieee80211_stop_protocol(struct ieee80211_device
*ieee
,u8 shutdown
);
2590 extern void ieee80211_softmac_start_protocol(struct ieee80211_device
*ieee
);
2591 extern void ieee80211_softmac_stop_protocol(struct ieee80211_device
*ieee
,u8 shutdown
);
2592 extern void ieee80211_reset_queue(struct ieee80211_device
*ieee
);
2593 extern void ieee80211_rtl_wake_queue(struct ieee80211_device
*ieee
);
2594 extern void ieee80211_rtl_stop_queue(struct ieee80211_device
*ieee
);
2595 extern struct sk_buff
*ieee80211_get_beacon(struct ieee80211_device
*ieee
);
2596 extern void ieee80211_start_send_beacons(struct ieee80211_device
*ieee
);
2597 extern void ieee80211_stop_send_beacons(struct ieee80211_device
*ieee
);
2598 extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device
*ieee
, struct iw_point
*p
);
2599 extern void notify_wx_assoc_event(struct ieee80211_device
*ieee
);
2600 extern void ieee80211_ps_tx_ack(struct ieee80211_device
*ieee
, short success
);
2602 extern void softmac_mgmt_xmit(struct sk_buff
*skb
, struct ieee80211_device
*ieee
);
2604 /* ieee80211_crypt_ccmp&tkip&wep.c */
2605 extern void ieee80211_tkip_null(void);
2606 extern void ieee80211_wep_null(void);
2607 extern void ieee80211_ccmp_null(void);
2609 /* ieee80211_softmac_wx.c */
2611 extern int ieee80211_wx_get_wap(struct ieee80211_device
*ieee
,
2612 struct iw_request_info
*info
,
2613 union iwreq_data
*wrqu
, char *ext
);
2615 extern int ieee80211_wx_set_wap(struct ieee80211_device
*ieee
,
2616 struct iw_request_info
*info
,
2617 union iwreq_data
*awrq
,
2620 extern int ieee80211_wx_get_essid(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,union iwreq_data
*wrqu
,char *b
);
2622 extern int ieee80211_wx_set_rate(struct ieee80211_device
*ieee
,
2623 struct iw_request_info
*info
,
2624 union iwreq_data
*wrqu
, char *extra
);
2626 extern int ieee80211_wx_get_rate(struct ieee80211_device
*ieee
,
2627 struct iw_request_info
*info
,
2628 union iwreq_data
*wrqu
, char *extra
);
2630 extern int ieee80211_wx_set_mode(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2631 union iwreq_data
*wrqu
, char *b
);
2633 extern int ieee80211_wx_set_scan(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2634 union iwreq_data
*wrqu
, char *b
);
2636 extern int ieee80211_wx_set_essid(struct ieee80211_device
*ieee
,
2637 struct iw_request_info
*a
,
2638 union iwreq_data
*wrqu
, char *extra
);
2640 extern int ieee80211_wx_get_mode(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2641 union iwreq_data
*wrqu
, char *b
);
2643 extern int ieee80211_wx_set_freq(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2644 union iwreq_data
*wrqu
, char *b
);
2646 extern int ieee80211_wx_get_freq(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2647 union iwreq_data
*wrqu
, char *b
);
2649 //extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
2650 extern void ieee80211_wx_sync_scan_wq(struct work_struct
*work
);
2653 extern int ieee80211_wx_set_rawtx(struct ieee80211_device
*ieee
,
2654 struct iw_request_info
*info
,
2655 union iwreq_data
*wrqu
, char *extra
);
2657 extern int ieee80211_wx_get_name(struct ieee80211_device
*ieee
,
2658 struct iw_request_info
*info
,
2659 union iwreq_data
*wrqu
, char *extra
);
2661 extern int ieee80211_wx_set_power(struct ieee80211_device
*ieee
,
2662 struct iw_request_info
*info
,
2663 union iwreq_data
*wrqu
, char *extra
);
2665 extern int ieee80211_wx_get_power(struct ieee80211_device
*ieee
,
2666 struct iw_request_info
*info
,
2667 union iwreq_data
*wrqu
, char *extra
);
2669 extern int ieee80211_wx_set_rts(struct ieee80211_device
*ieee
,
2670 struct iw_request_info
*info
,
2671 union iwreq_data
*wrqu
, char *extra
);
2673 extern int ieee80211_wx_get_rts(struct ieee80211_device
*ieee
,
2674 struct iw_request_info
*info
,
2675 union iwreq_data
*wrqu
, char *extra
);
2677 #define MAX_RECEIVE_BUFFER_SIZE 9100 //
2678 extern void HTDebugHTCapability(u8
* CapIE
, u8
* TitleString
);
2679 extern void HTDebugHTInfo(u8
* InfoIE
, u8
* TitleString
);
2681 void HTSetConnectBwMode(struct ieee80211_device
* ieee
, HT_CHANNEL_WIDTH Bandwidth
, HT_EXTCHNL_OFFSET Offset
);
2682 extern void HTUpdateDefaultSetting(struct ieee80211_device
* ieee
);
2683 extern void HTConstructCapabilityElement(struct ieee80211_device
* ieee
, u8
* posHTCap
, u8
* len
, u8 isEncrypt
);
2684 extern void HTConstructInfoElement(struct ieee80211_device
* ieee
, u8
* posHTInfo
, u8
* len
, u8 isEncrypt
);
2685 extern void HTConstructRT2RTAggElement(struct ieee80211_device
* ieee
, u8
* posRT2RTAgg
, u8
* len
);
2686 extern void HTOnAssocRsp(struct ieee80211_device
*ieee
);
2687 extern void HTInitializeHTInfo(struct ieee80211_device
* ieee
);
2688 extern void HTInitializeBssDesc(PBSS_HT pBssHT
);
2689 extern void HTResetSelfAndSavePeerSetting(struct ieee80211_device
* ieee
, struct ieee80211_network
* pNetwork
);
2690 extern void HTUpdateSelfAndPeerSetting(struct ieee80211_device
* ieee
, struct ieee80211_network
* pNetwork
);
2691 extern u8
HTGetHighestMCSRate(struct ieee80211_device
* ieee
, u8
* pMCSRateSet
, u8
* pMCSFilter
);
2692 extern u8 MCS_FILTER_ALL
[];
2693 extern u16 MCS_DATA_RATE
[2][2][77] ;
2694 extern u8
HTCCheck(struct ieee80211_device
* ieee
, u8
* pFrame
);
2695 //extern void HTSetConnectBwModeCallback(unsigned long data);
2696 extern void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo
);
2697 extern bool IsHTHalfNmodeAPs(struct ieee80211_device
* ieee
);
2698 extern u16
HTHalfMcsToDataRate(struct ieee80211_device
* ieee
, u8 nMcsRate
);
2699 extern u16
HTMcsToDataRate( struct ieee80211_device
* ieee
, u8 nMcsRate
);
2700 extern u16
TxCountToDataRate( struct ieee80211_device
* ieee
, u8 nDataRate
);
2701 //function in BAPROC.c
2702 extern int ieee80211_rx_ADDBAReq( struct ieee80211_device
* ieee
, struct sk_buff
*skb
);
2703 extern int ieee80211_rx_ADDBARsp( struct ieee80211_device
* ieee
, struct sk_buff
*skb
);
2704 extern int ieee80211_rx_DELBA(struct ieee80211_device
* ieee
,struct sk_buff
*skb
);
2705 extern void TsInitAddBA( struct ieee80211_device
* ieee
, PTX_TS_RECORD pTS
, u8 Policy
, u8 bOverwritePending
);
2706 extern void TsInitDelBA( struct ieee80211_device
* ieee
, PTS_COMMON_INFO pTsCommonInfo
, TR_SELECT TxRxSelect
);
2707 extern void BaSetupTimeOut(unsigned long data
);
2708 extern void TxBaInactTimeout(unsigned long data
);
2709 extern void RxBaInactTimeout(unsigned long data
);
2710 extern void ResetBaEntry( PBA_RECORD pBA
);
2713 struct ieee80211_device
* ieee
,
2714 PTS_COMMON_INFO
*ppTS
,
2717 TR_SELECT TxRxSelect
, //Rx:1, Tx:0
2720 extern void TSInitialize(struct ieee80211_device
*ieee
);
2721 extern void TsStartAddBaProcess(struct ieee80211_device
* ieee
, PTX_TS_RECORD pTxTS
);
2722 extern void RemovePeerTS(struct ieee80211_device
* ieee
, u8
* Addr
);
2723 extern void RemoveAllTS(struct ieee80211_device
* ieee
);
2724 void ieee80211_softmac_scan_syncro(struct ieee80211_device
*ieee
);
2726 extern const long ieee80211_wlan_frequencies
[];
2728 extern inline void ieee80211_increment_scans(struct ieee80211_device
*ieee
)
2733 extern inline int ieee80211_get_scans(struct ieee80211_device
*ieee
)
2738 static inline const char *escape_essid(const char *essid
, u8 essid_len
) {
2739 static char escaped
[IW_ESSID_MAX_SIZE
* 2 + 1];
2740 const char *s
= essid
;
2743 if (ieee80211_is_empty_essid(essid
, essid_len
)) {
2744 memcpy(escaped
, "<hidden>", sizeof("<hidden>"));
2748 essid_len
= min(essid_len
, (u8
)IW_ESSID_MAX_SIZE
);
2749 while (essid_len
--) {
2762 /* For the function is more related to hardware setting, it's better to use the
2763 * ieee handler to refer to it.
2765 extern short check_nic_enough_desc(struct net_device
*dev
, int queue_index
);
2766 extern int ieee80211_data_xmit(struct sk_buff
*skb
, struct net_device
*dev
);
2767 extern int ieee80211_parse_info_param(struct ieee80211_device
*ieee
,
2768 struct ieee80211_info_element
*info_element
,
2770 struct ieee80211_network
*network
,
2771 struct ieee80211_rx_stats
*stats
);
2773 void ieee80211_indicate_packets(struct ieee80211_device
*ieee
, struct ieee80211_rxb
** prxbIndicateArray
,u8 index
);
2774 void ieee80211_sta_ps_send_null_frame(struct ieee80211_device
*ieee
, short pwr
);
2775 void ieee80211_sta_ps_send_pspoll_frame(struct ieee80211_device
*ieee
);
2776 #define RT_ASOC_RETRY_LIMIT 5
2777 #endif /* IEEE80211_H */