release/src-rt-6.x.4708/linux/linux-2.6.36/drivers/staging/go7007/saa7134-go7007.c

   1 /*
   2  * Copyright (C) 2005-2006 Micronas USA Inc.
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License (Version 2) as
   6  * published by the Free Software Foundation.
   7  *
   8  * This program is distributed in the hope that it will be useful,
   9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11  * GNU General Public License for more details.
  12  *
  13  * You should have received a copy of the GNU General Public License
  14  * along with this program; if not, write to the Free Software Foundation,
  15  * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  16  */
  17
  18 #include <linux/module.h>
  19 #include <linux/kernel.h>
  20 #include <linux/init.h>
  21 #include <linux/spinlock.h>
  22 #include <linux/wait.h>
  23 #include <linux/list.h>
  24 #include <linux/slab.h>
  25 #include <linux/time.h>
  26 #include <linux/mm.h>
  27 #include <linux/usb.h>
  28 #include <linux/i2c.h>
  29 #include <asm/byteorder.h>
  30 #include <media/v4l2-common.h>
  31
  32 #include "saa7134-reg.h"
  33 #include "saa7134.h"
  34 #include "go7007-priv.h"
  35
  36 #define GO7007_HPI_DEBUG
  37
  38 enum hpi_address {
  39         HPI_ADDR_VIDEO_BUFFER = 0xe4,
  40         HPI_ADDR_INIT_BUFFER = 0xea,
  41         HPI_ADDR_INTR_RET_VALUE = 0xee,
  42         HPI_ADDR_INTR_RET_DATA = 0xec,
  43         HPI_ADDR_INTR_STATUS = 0xf4,
  44         HPI_ADDR_INTR_WR_PARAM = 0xf6,
  45         HPI_ADDR_INTR_WR_INDEX = 0xf8,
  46 };
  47
  48 enum gpio_command {
  49         GPIO_COMMAND_RESET = 0x00, /* 000b */
  50         GPIO_COMMAND_REQ1  = 0x04, /* 001b */
  51         GPIO_COMMAND_WRITE = 0x20, /* 010b */
  52         GPIO_COMMAND_REQ2  = 0x24, /* 011b */
  53         GPIO_COMMAND_READ  = 0x80, /* 100b */
  54         GPIO_COMMAND_VIDEO = 0x84, /* 101b */
  55         GPIO_COMMAND_IDLE  = 0xA0, /* 110b */
  56         GPIO_COMMAND_ADDR  = 0xA4, /* 111b */
  57 };
  58
  59 struct saa7134_go7007 {
  60         struct saa7134_dev *dev;
  61         u8 *top;
  62         u8 *bottom;
  63         dma_addr_t top_dma;
  64         dma_addr_t bottom_dma;
  65 };
  66
  67 static struct go7007_board_info board_voyager = {
  68         .firmware        = "go7007tv.bin",
  69         .flags           = 0,
  70         .sensor_flags    = GO7007_SENSOR_656 |
  71                                 GO7007_SENSOR_VALID_ENABLE |
  72                                 GO7007_SENSOR_TV |
  73                                 GO7007_SENSOR_VBI,
  74         .audio_flags    = GO7007_AUDIO_I2S_MODE_1 |
  75                                 GO7007_AUDIO_WORD_16,
  76         .audio_rate      = 48000,
  77         .audio_bclk_div  = 8,
  78         .audio_main_div  = 2,
  79         .hpi_buffer_cap  = 7,
  80         .num_inputs      = 1,
  81         .inputs          = {
  82                 {
  83                         .name           = "SAA7134",
  84                 },
  85         },
  86 };
  87 MODULE_FIRMWARE("go7007tv.bin");
  88
  89 /********************* Driver for GPIO HPI interface *********************/
  90
  91 static int gpio_write(struct saa7134_dev *dev, u8 addr, u16 data)
  92 {
  93         saa_writeb(SAA7134_GPIO_GPMODE0, 0xff);
  94
  95         /* Write HPI address */
  96         saa_writeb(SAA7134_GPIO_GPSTATUS0, addr);
  97         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_ADDR);
  98         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE);
  99
 100         /* Write low byte */
 101         saa_writeb(SAA7134_GPIO_GPSTATUS0, data & 0xff);
 102         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_WRITE);
 103         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE);
 104
 105         /* Write high byte */
 106         saa_writeb(SAA7134_GPIO_GPSTATUS0, data >> 8);
 107         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_WRITE);
 108         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE);
 109
 110         return 0;
 111 }
 112
 113 static int gpio_read(struct saa7134_dev *dev, u8 addr, u16 *data)
 114 {
 115         saa_writeb(SAA7134_GPIO_GPMODE0, 0xff);
 116
 117         /* Write HPI address */
 118         saa_writeb(SAA7134_GPIO_GPSTATUS0, addr);
 119         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_ADDR);
 120         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE);
 121
 122         saa_writeb(SAA7134_GPIO_GPMODE0, 0x00);
 123
 124         /* Read low byte */
 125         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_READ);
 126         saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
 127         saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
 128         *data = saa_readb(SAA7134_GPIO_GPSTATUS0);
 129         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE);
 130
 131         /* Read high byte */
 132         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_READ);
 133         saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
 134         saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
 135         *data |= saa_readb(SAA7134_GPIO_GPSTATUS0) << 8;
 136         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE);
 137
 138         return 0;
 139 }
 140
 141 static int saa7134_go7007_interface_reset(struct go7007 *go)
 142 {
 143         struct saa7134_go7007 *saa = go->hpi_context;
 144         struct saa7134_dev *dev = saa->dev;
 145         u32 status;
 146         u16 intr_val, intr_data;
 147         int count = 20;
 148
 149         saa_clearb(SAA7134_TS_PARALLEL, 0x80); /* Disable TS interface */
 150         saa_writeb(SAA7134_GPIO_GPMODE2, 0xa4);
 151         saa_writeb(SAA7134_GPIO_GPMODE0, 0xff);
 152
 153         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_REQ1);
 154         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_RESET);
 155         msleep(1);
 156         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_REQ1);
 157         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_REQ2);
 158         msleep(10);
 159
 160         saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
 161         saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
 162
 163         status = saa_readb(SAA7134_GPIO_GPSTATUS2);
 164         /*printk(KERN_DEBUG "status is %s\n", status & 0x40 ? "OK" : "not OK"); */
 165
 166         /* enter command mode...(?) */
 167         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_REQ1);
 168         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_REQ2);
 169
 170         do {
 171                 saa_clearb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
 172                 saa_setb(SAA7134_GPIO_GPMODE3, SAA7134_GPIO_GPRESCAN);
 173                 status = saa_readb(SAA7134_GPIO_GPSTATUS2);
 174                 /*printk(KERN_INFO "gpio is %08x\n", saa_readl(SAA7134_GPIO_GPSTATUS0 >> 2)); */
 175         } while (--count > 0);
 176
 177         /* Wait for an interrupt to indicate successful hardware reset */
 178         if (go7007_read_interrupt(go, &intr_val, &intr_data) < 0 ||
 179                         (intr_val & ~0x1) != 0x55aa) {
 180                 printk(KERN_ERR
 181                         "saa7134-go7007: unable to reset the GO7007\n");
 182                 return -1;
 183         }
 184         return 0;
 185 }
 186
 187 static int saa7134_go7007_write_interrupt(struct go7007 *go, int addr, int data)
 188 {
 189         struct saa7134_go7007 *saa = go->hpi_context;
 190         struct saa7134_dev *dev = saa->dev;
 191         int i;
 192         u16 status_reg;
 193
 194 #ifdef GO7007_HPI_DEBUG
 195         printk(KERN_DEBUG
 196                 "saa7134-go7007: WriteInterrupt: %04x %04x\n", addr, data);
 197 #endif
 198
 199         for (i = 0; i < 100; ++i) {
 200                 gpio_read(dev, HPI_ADDR_INTR_STATUS, &status_reg);
 201                 if (!(status_reg & 0x0010))
 202                         break;
 203                 msleep(10);
 204         }
 205         if (i == 100) {
 206                 printk(KERN_ERR
 207                         "saa7134-go7007: device is hung, status reg = 0x%04x\n",
 208                         status_reg);
 209                 return -1;
 210         }
 211         gpio_write(dev, HPI_ADDR_INTR_WR_PARAM, data);
 212         gpio_write(dev, HPI_ADDR_INTR_WR_INDEX, addr);
 213
 214         return 0;
 215 }
 216
 217 static int saa7134_go7007_read_interrupt(struct go7007 *go)
 218 {
 219         struct saa7134_go7007 *saa = go->hpi_context;
 220         struct saa7134_dev *dev = saa->dev;
 221
 222         go->interrupt_available = 1;
 223         gpio_read(dev, HPI_ADDR_INTR_RET_VALUE, &go->interrupt_value);
 224         gpio_read(dev, HPI_ADDR_INTR_RET_DATA, &go->interrupt_data);
 225 #ifdef GO7007_HPI_DEBUG
 226         printk(KERN_DEBUG "saa7134-go7007: ReadInterrupt: %04x %04x\n",
 227                         go->interrupt_value, go->interrupt_data);
 228 #endif
 229         return 0;
 230 }
 231
 232 static void saa7134_go7007_irq_ts_done(struct saa7134_dev *dev,
 233                                                 unsigned long status)
 234 {
 235         struct go7007 *go = video_get_drvdata(dev->empress_dev);
 236         struct saa7134_go7007 *saa = go->hpi_context;
 237
 238         if (!go->streaming)
 239                 return;
 240         if (0 != (status & 0x000f0000))
 241                 printk(KERN_DEBUG "saa7134-go7007: irq: lost %ld\n",
 242                                 (status >> 16) & 0x0f);
 243         if (status & 0x100000) {
 244                 dma_sync_single_for_cpu(&dev->pci->dev,
 245                                         saa->bottom_dma, PAGE_SIZE, DMA_FROM_DEVICE);
 246                 go7007_parse_video_stream(go, saa->bottom, PAGE_SIZE);
 247                 saa_writel(SAA7134_RS_BA2(5), cpu_to_le32(saa->bottom_dma));
 248         } else {
 249                 dma_sync_single_for_cpu(&dev->pci->dev,
 250                                         saa->top_dma, PAGE_SIZE, DMA_FROM_DEVICE);
 251                 go7007_parse_video_stream(go, saa->top, PAGE_SIZE);
 252                 saa_writel(SAA7134_RS_BA1(5), cpu_to_le32(saa->top_dma));
 253         }
 254 }
 255
 256 static int saa7134_go7007_stream_start(struct go7007 *go)
 257 {
 258         struct saa7134_go7007 *saa = go->hpi_context;
 259         struct saa7134_dev *dev = saa->dev;
 260
 261         saa->top_dma = dma_map_page(&dev->pci->dev, virt_to_page(saa->top),
 262                         0, PAGE_SIZE, DMA_FROM_DEVICE);
 263         if (!saa->top_dma)
 264                 return -ENOMEM;
 265         saa->bottom_dma = dma_map_page(&dev->pci->dev,
 266                         virt_to_page(saa->bottom),
 267                         0, PAGE_SIZE, DMA_FROM_DEVICE);
 268         if (!saa->bottom_dma) {
 269                 dma_unmap_page(&dev->pci->dev, saa->top_dma, PAGE_SIZE,
 270                                 DMA_FROM_DEVICE);
 271                 return -ENOMEM;
 272         }
 273
 274         saa_writel(SAA7134_VIDEO_PORT_CTRL0 >> 2, 0xA300B000);
 275         saa_writel(SAA7134_VIDEO_PORT_CTRL4 >> 2, 0x40000200);
 276
 277         /* Set HPI interface for video */
 278         saa_writeb(SAA7134_GPIO_GPMODE0, 0xff);
 279         saa_writeb(SAA7134_GPIO_GPSTATUS0, HPI_ADDR_VIDEO_BUFFER);
 280         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_ADDR);
 281         saa_writeb(SAA7134_GPIO_GPMODE0, 0x00);
 282
 283         /* Enable TS interface */
 284         saa_writeb(SAA7134_TS_PARALLEL, 0xe6);
 285
 286         /* Reset TS interface */
 287         saa_setb(SAA7134_TS_SERIAL1, 0x01);
 288         saa_clearb(SAA7134_TS_SERIAL1, 0x01);
 289
 290         /* Set up transfer block size */
 291         saa_writeb(SAA7134_TS_PARALLEL_SERIAL, 128 - 1);
 292         saa_writeb(SAA7134_TS_DMA0, (PAGE_SIZE >> 7) - 1);
 293         saa_writeb(SAA7134_TS_DMA1, 0);
 294         saa_writeb(SAA7134_TS_DMA2, 0);
 295
 296         /* Enable video streaming mode */
 297         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_VIDEO);
 298
 299         saa_writel(SAA7134_RS_BA1(5), cpu_to_le32(saa->top_dma));
 300         saa_writel(SAA7134_RS_BA2(5), cpu_to_le32(saa->bottom_dma));
 301         saa_writel(SAA7134_RS_PITCH(5), 128);
 302         saa_writel(SAA7134_RS_CONTROL(5), SAA7134_RS_CONTROL_BURST_MAX);
 303
 304         /* Enable TS FIFO */
 305         saa_setl(SAA7134_MAIN_CTRL, SAA7134_MAIN_CTRL_TE5);
 306
 307         /* Enable DMA IRQ */
 308         saa_setl(SAA7134_IRQ1,
 309                         SAA7134_IRQ1_INTE_RA2_1 | SAA7134_IRQ1_INTE_RA2_0);
 310
 311         return 0;
 312 }
 313
 314 static int saa7134_go7007_stream_stop(struct go7007 *go)
 315 {
 316         struct saa7134_go7007 *saa = go->hpi_context;
 317         struct saa7134_dev *dev;
 318
 319         if (!saa)
 320                 return -EINVAL;
 321         dev = saa->dev;
 322         if (!dev)
 323                 return -EINVAL;
 324
 325         /* Shut down TS FIFO */
 326         saa_clearl(SAA7134_MAIN_CTRL, SAA7134_MAIN_CTRL_TE5);
 327
 328         /* Disable DMA IRQ */
 329         saa_clearl(SAA7134_IRQ1,
 330                         SAA7134_IRQ1_INTE_RA2_1 | SAA7134_IRQ1_INTE_RA2_0);
 331
 332         /* Disable TS interface */
 333         saa_clearb(SAA7134_TS_PARALLEL, 0x80);
 334
 335         dma_unmap_page(&dev->pci->dev, saa->top_dma, PAGE_SIZE,
 336                         DMA_FROM_DEVICE);
 337         dma_unmap_page(&dev->pci->dev, saa->bottom_dma, PAGE_SIZE,
 338                         DMA_FROM_DEVICE);
 339
 340         return 0;
 341 }
 342
 343 static int saa7134_go7007_send_firmware(struct go7007 *go, u8 *data, int len)
 344 {
 345         struct saa7134_go7007 *saa = go->hpi_context;
 346         struct saa7134_dev *dev = saa->dev;
 347         u16 status_reg;
 348         int i;
 349
 350 #ifdef GO7007_HPI_DEBUG
 351         printk(KERN_DEBUG "saa7134-go7007: DownloadBuffer "
 352                         "sending %d bytes\n", len);
 353 #endif
 354
 355         while (len > 0) {
 356                 i = len > 64 ? 64 : len;
 357                 saa_writeb(SAA7134_GPIO_GPMODE0, 0xff);
 358                 saa_writeb(SAA7134_GPIO_GPSTATUS0, HPI_ADDR_INIT_BUFFER);
 359                 saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_ADDR);
 360                 saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE);
 361                 while (i-- > 0) {
 362                         saa_writeb(SAA7134_GPIO_GPSTATUS0, *data);
 363                         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_WRITE);
 364                         saa_writeb(SAA7134_GPIO_GPSTATUS2, GPIO_COMMAND_IDLE);
 365                         ++data;
 366                         --len;
 367                 }
 368                 for (i = 0; i < 100; ++i) {
 369                         gpio_read(dev, HPI_ADDR_INTR_STATUS, &status_reg);
 370                         if (!(status_reg & 0x0002))
 371                                 break;
 372                 }
 373                 if (i == 100) {
 374                         printk(KERN_ERR "saa7134-go7007: device is hung, "
 375                                         "status reg = 0x%04x\n", status_reg);
 376                         return -1;
 377                 }
 378         }
 379         return 0;
 380 }
 381
 382 static int saa7134_go7007_send_command(struct go7007 *go, unsigned int cmd,
 383                                         void *arg)
 384 {
 385         struct saa7134_go7007 *saa = go->hpi_context;
 386         struct saa7134_dev *dev = saa->dev;
 387
 388         switch (cmd) {
 389         case VIDIOC_S_STD:
 390         {
 391                 v4l2_std_id *std = arg;
 392                 return saa7134_s_std_internal(dev, NULL, std);
 393         }
 394         case VIDIOC_G_STD:
 395         {
 396                 v4l2_std_id *std = arg;
 397                 *std = dev->tvnorm->id;
 398                 return 0;
 399         }
 400         case VIDIOC_QUERYCTRL:
 401         {
 402                 struct v4l2_queryctrl *ctrl = arg;
 403                 if (V4L2_CTRL_ID2CLASS(ctrl->id) == V4L2_CTRL_CLASS_USER)
 404                         return saa7134_queryctrl(NULL, NULL, ctrl);
 405         }
 406         case VIDIOC_G_CTRL:
 407         {
 408                 struct v4l2_control *ctrl = arg;
 409                 if (V4L2_CTRL_ID2CLASS(ctrl->id) == V4L2_CTRL_CLASS_USER)
 410                         return saa7134_g_ctrl_internal(dev, NULL, ctrl);
 411         }
 412         case VIDIOC_S_CTRL:
 413         {
 414                 struct v4l2_control *ctrl = arg;
 415                 if (V4L2_CTRL_ID2CLASS(ctrl->id) == V4L2_CTRL_CLASS_USER)
 416                         return saa7134_s_ctrl_internal(dev, NULL, ctrl);
 417         }
 418         }
 419         return -EINVAL;
 420
 421 }
 422
 423 static struct go7007_hpi_ops saa7134_go7007_hpi_ops = {
 424         .interface_reset        = saa7134_go7007_interface_reset,
 425         .write_interrupt        = saa7134_go7007_write_interrupt,
 426         .read_interrupt         = saa7134_go7007_read_interrupt,
 427         .stream_start           = saa7134_go7007_stream_start,
 428         .stream_stop            = saa7134_go7007_stream_stop,
 429         .send_firmware          = saa7134_go7007_send_firmware,
 430         .send_command           = saa7134_go7007_send_command,
 431 };
 432
 433 /********************* Add/remove functions *********************/
 434
 435 static int saa7134_go7007_init(struct saa7134_dev *dev)
 436 {
 437         struct go7007 *go;
 438         struct saa7134_go7007 *saa;
 439
 440         printk(KERN_DEBUG "saa7134-go7007: probing new SAA713X board\n");
 441
 442         saa = kzalloc(sizeof(struct saa7134_go7007), GFP_KERNEL);
 443         if (saa == NULL)
 444                 return -ENOMEM;
 445
 446         /* Allocate a couple pages for receiving the compressed stream */
 447         saa->top = (u8 *)get_zeroed_page(GFP_KERNEL);
 448         if (!saa->top)
 449                 goto allocfail;
 450         saa->bottom = (u8 *)get_zeroed_page(GFP_KERNEL);
 451         if (!saa->bottom)
 452                 goto allocfail;
 453
 454         go = go7007_alloc(&board_voyager, &dev->pci->dev);
 455         if (go == NULL)
 456                 goto allocfail;
 457         go->board_id = GO7007_BOARDID_PCI_VOYAGER;
 458         strncpy(go->name, saa7134_boards[dev->board].name, sizeof(go->name));
 459         go->hpi_ops = &saa7134_go7007_hpi_ops;
 460         go->hpi_context = saa;
 461         saa->dev = dev;
 462
 463         /* Boot the GO7007 */
 464         if (go7007_boot_encoder(go, go->board_info->flags &
 465                                         GO7007_BOARD_USE_ONBOARD_I2C) < 0)
 466                 goto initfail;
 467
 468         /* Do any final GO7007 initialization, then register the
 469          * V4L2 and ALSA interfaces */
 470         if (go7007_register_encoder(go) < 0)
 471                 goto initfail;
 472         dev->empress_dev = go->video_dev;
 473         video_set_drvdata(dev->empress_dev, go);
 474
 475         go->status = STATUS_ONLINE;
 476         return 0;
 477
 478 initfail:
 479         go->status = STATUS_SHUTDOWN;
 480         return 0;
 481
 482 allocfail:
 483         if (saa->top)
 484                 free_page((unsigned long)saa->top);
 485         if (saa->bottom)
 486                 free_page((unsigned long)saa->bottom);
 487         kfree(saa);
 488         return -ENOMEM;
 489 }
 490
 491 static int saa7134_go7007_fini(struct saa7134_dev *dev)
 492 {
 493         struct go7007 *go;
 494         struct saa7134_go7007 *saa;
 495
 496         if (NULL == dev->empress_dev)
 497                 return 0;
 498
 499         go = video_get_drvdata(dev->empress_dev);
 500         saa = go->hpi_context;
 501         go->status = STATUS_SHUTDOWN;
 502         free_page((unsigned long)saa->top);
 503         free_page((unsigned long)saa->bottom);
 504         kfree(saa);
 505         go7007_remove(go);
 506         dev->empress_dev = NULL;
 507
 508         return 0;
 509 }
 510
 511 static struct saa7134_mpeg_ops saa7134_go7007_ops = {
 512         .type          = SAA7134_MPEG_GO7007,
 513         .init          = saa7134_go7007_init,
 514         .fini          = saa7134_go7007_fini,
 515         .irq_ts_done   = saa7134_go7007_irq_ts_done,
 516 };
 517
 518 static int __init saa7134_go7007_mod_init(void)
 519 {
 520         return saa7134_ts_register(&saa7134_go7007_ops);
 521 }
 522
 523 static void __exit saa7134_go7007_mod_cleanup(void)
 524 {
 525         saa7134_ts_unregister(&saa7134_go7007_ops);
 526 }
 527
 528 module_init(saa7134_go7007_mod_init);
 529 module_exit(saa7134_go7007_mod_cleanup);
 530
 531 MODULE_LICENSE("GPL v2");