GUI: Fix Tomato RAF theme for all builds. Compilation typo.
[tomato.git] / release / src-rt-6.x.4708 / linux / linux-2.6.36 / drivers / s390 / cio / qdio.h
blob142af5bc3a4f1e2a273656715feddca288edfd97
1 /*
2 * linux/drivers/s390/cio/qdio.h
4 * Copyright 2000,2009 IBM Corp.
5 * Author(s): Utz Bacher <utz.bacher@de.ibm.com>
6 * Jan Glauber <jang@linux.vnet.ibm.com>
7 */
8 #ifndef _CIO_QDIO_H
9 #define _CIO_QDIO_H
11 #include <asm/page.h>
12 #include <asm/schid.h>
13 #include <asm/debug.h>
14 #include "chsc.h"
16 #define QDIO_BUSY_BIT_PATIENCE (100 << 12) /* 100 microseconds */
17 #define QDIO_INPUT_THRESHOLD (500 << 12) /* 500 microseconds */
20 * if an asynchronous HiperSockets queue runs full, the 10 seconds timer wait
21 * till next initiative to give transmitted skbs back to the stack is too long.
22 * Therefore polling is started in case of multicast queue is filled more
23 * than 50 percent.
25 #define QDIO_IQDIO_POLL_LVL 65 /* HS multicast queue */
27 enum qdio_irq_states {
28 QDIO_IRQ_STATE_INACTIVE,
29 QDIO_IRQ_STATE_ESTABLISHED,
30 QDIO_IRQ_STATE_ACTIVE,
31 QDIO_IRQ_STATE_STOPPED,
32 QDIO_IRQ_STATE_CLEANUP,
33 QDIO_IRQ_STATE_ERR,
34 NR_QDIO_IRQ_STATES,
37 /* used as intparm in do_IO */
38 #define QDIO_DOING_ESTABLISH 1
39 #define QDIO_DOING_ACTIVATE 2
40 #define QDIO_DOING_CLEANUP 3
42 #define SLSB_STATE_NOT_INIT 0x0
43 #define SLSB_STATE_EMPTY 0x1
44 #define SLSB_STATE_PRIMED 0x2
45 #define SLSB_STATE_HALTED 0xe
46 #define SLSB_STATE_ERROR 0xf
47 #define SLSB_TYPE_INPUT 0x0
48 #define SLSB_TYPE_OUTPUT 0x20
49 #define SLSB_OWNER_PROG 0x80
50 #define SLSB_OWNER_CU 0x40
52 #define SLSB_P_INPUT_NOT_INIT \
53 (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_NOT_INIT) /* 0x80 */
54 #define SLSB_P_INPUT_ACK \
55 (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_EMPTY) /* 0x81 */
56 #define SLSB_CU_INPUT_EMPTY \
57 (SLSB_OWNER_CU | SLSB_TYPE_INPUT | SLSB_STATE_EMPTY) /* 0x41 */
58 #define SLSB_P_INPUT_PRIMED \
59 (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_PRIMED) /* 0x82 */
60 #define SLSB_P_INPUT_HALTED \
61 (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_HALTED) /* 0x8e */
62 #define SLSB_P_INPUT_ERROR \
63 (SLSB_OWNER_PROG | SLSB_TYPE_INPUT | SLSB_STATE_ERROR) /* 0x8f */
64 #define SLSB_P_OUTPUT_NOT_INIT \
65 (SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_NOT_INIT) /* 0xa0 */
66 #define SLSB_P_OUTPUT_EMPTY \
67 (SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_EMPTY) /* 0xa1 */
68 #define SLSB_CU_OUTPUT_PRIMED \
69 (SLSB_OWNER_CU | SLSB_TYPE_OUTPUT | SLSB_STATE_PRIMED) /* 0x62 */
70 #define SLSB_P_OUTPUT_HALTED \
71 (SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_HALTED) /* 0xae */
72 #define SLSB_P_OUTPUT_ERROR \
73 (SLSB_OWNER_PROG | SLSB_TYPE_OUTPUT | SLSB_STATE_ERROR) /* 0xaf */
75 #define SLSB_ERROR_DURING_LOOKUP 0xff
77 /* additional CIWs returned by extended Sense-ID */
78 #define CIW_TYPE_EQUEUE 0x3 /* establish QDIO queues */
79 #define CIW_TYPE_AQUEUE 0x4 /* activate QDIO queues */
81 /* flags for st qdio sch data */
82 #define CHSC_FLAG_QDIO_CAPABILITY 0x80
83 #define CHSC_FLAG_VALIDITY 0x40
85 /* qdio adapter-characteristics-1 flag */
86 #define AC1_SIGA_INPUT_NEEDED 0x40 /* process input queues */
87 #define AC1_SIGA_OUTPUT_NEEDED 0x20 /* process output queues */
88 #define AC1_SIGA_SYNC_NEEDED 0x10 /* ask hypervisor to sync */
89 #define AC1_AUTOMATIC_SYNC_ON_THININT 0x08 /* set by hypervisor */
90 #define AC1_AUTOMATIC_SYNC_ON_OUT_PCI 0x04 /* set by hypervisor */
91 #define AC1_SC_QEBSM_AVAILABLE 0x02 /* available for subchannel */
92 #define AC1_SC_QEBSM_ENABLED 0x01 /* enabled for subchannel */
94 /* SIGA flags */
95 #define QDIO_SIGA_WRITE 0x00
96 #define QDIO_SIGA_READ 0x01
97 #define QDIO_SIGA_SYNC 0x02
98 #define QDIO_SIGA_QEBSM_FLAG 0x80
100 #ifdef CONFIG_64BIT
101 static inline int do_sqbs(u64 token, unsigned char state, int queue,
102 int *start, int *count)
104 register unsigned long _ccq asm ("0") = *count;
105 register unsigned long _token asm ("1") = token;
106 unsigned long _queuestart = ((unsigned long)queue << 32) | *start;
108 asm volatile(
109 " .insn rsy,0xeb000000008A,%1,0,0(%2)"
110 : "+d" (_ccq), "+d" (_queuestart)
111 : "d" ((unsigned long)state), "d" (_token)
112 : "memory", "cc");
113 *count = _ccq & 0xff;
114 *start = _queuestart & 0xff;
116 return (_ccq >> 32) & 0xff;
119 static inline int do_eqbs(u64 token, unsigned char *state, int queue,
120 int *start, int *count, int ack)
122 register unsigned long _ccq asm ("0") = *count;
123 register unsigned long _token asm ("1") = token;
124 unsigned long _queuestart = ((unsigned long)queue << 32) | *start;
125 unsigned long _state = (unsigned long)ack << 63;
127 asm volatile(
128 " .insn rrf,0xB99c0000,%1,%2,0,0"
129 : "+d" (_ccq), "+d" (_queuestart), "+d" (_state)
130 : "d" (_token)
131 : "memory", "cc");
132 *count = _ccq & 0xff;
133 *start = _queuestart & 0xff;
134 *state = _state & 0xff;
136 return (_ccq >> 32) & 0xff;
138 #else
139 static inline int do_sqbs(u64 token, unsigned char state, int queue,
140 int *start, int *count) { return 0; }
141 static inline int do_eqbs(u64 token, unsigned char *state, int queue,
142 int *start, int *count, int ack) { return 0; }
143 #endif /* CONFIG_64BIT */
145 struct qdio_irq;
147 struct siga_flag {
148 u8 input:1;
149 u8 output:1;
150 u8 sync:1;
151 u8 no_sync_ti:1;
152 u8 no_sync_out_ti:1;
153 u8 no_sync_out_pci:1;
154 u8:2;
155 } __attribute__ ((packed));
157 struct chsc_ssqd_area {
158 struct chsc_header request;
159 u16:10;
160 u8 ssid:2;
161 u8 fmt:4;
162 u16 first_sch;
163 u16:16;
164 u16 last_sch;
165 u32:32;
166 struct chsc_header response;
167 u32:32;
168 struct qdio_ssqd_desc qdio_ssqd;
169 } __attribute__ ((packed));
171 struct scssc_area {
172 struct chsc_header request;
173 u16 operation_code;
174 u16:16;
175 u32:32;
176 u32:32;
177 u64 summary_indicator_addr;
178 u64 subchannel_indicator_addr;
179 u32 ks:4;
180 u32 kc:4;
181 u32:21;
182 u32 isc:3;
183 u32 word_with_d_bit;
184 u32:32;
185 struct subchannel_id schid;
186 u32 reserved[1004];
187 struct chsc_header response;
188 u32:32;
189 } __attribute__ ((packed));
191 struct qdio_dev_perf_stat {
192 unsigned int adapter_int;
193 unsigned int qdio_int;
194 unsigned int pci_request_int;
196 unsigned int tasklet_inbound;
197 unsigned int tasklet_inbound_resched;
198 unsigned int tasklet_inbound_resched2;
199 unsigned int tasklet_outbound;
201 unsigned int siga_read;
202 unsigned int siga_write;
203 unsigned int siga_sync;
205 unsigned int inbound_call;
206 unsigned int inbound_handler;
207 unsigned int stop_polling;
208 unsigned int inbound_queue_full;
209 unsigned int outbound_call;
210 unsigned int outbound_handler;
211 unsigned int fast_requeue;
212 unsigned int target_full;
213 unsigned int eqbs;
214 unsigned int eqbs_partial;
215 unsigned int sqbs;
216 unsigned int sqbs_partial;
217 } ____cacheline_aligned;
219 struct qdio_queue_perf_stat {
221 * Sorted into order-2 buckets: 1, 2-3, 4-7, ... 64-127, 128.
222 * Since max. 127 SBALs are scanned reuse entry for 128 as queue full
223 * aka 127 SBALs found.
225 unsigned int nr_sbals[8];
226 unsigned int nr_sbal_error;
227 unsigned int nr_sbal_nop;
228 unsigned int nr_sbal_total;
231 struct qdio_input_q {
232 /* input buffer acknowledgement flag */
233 int polling;
234 /* first ACK'ed buffer */
235 int ack_start;
236 /* how much sbals are acknowledged with qebsm */
237 int ack_count;
238 /* last time of noticing incoming data */
239 u64 timestamp;
242 struct qdio_output_q {
243 /* PCIs are enabled for the queue */
244 int pci_out_enabled;
245 /* IQDIO: output multiple buffers (enhanced SIGA) */
246 int use_enh_siga;
247 /* timer to check for more outbound work */
248 struct timer_list timer;
252 * Note on cache alignment: grouped slsb and write mostly data at the beginning
253 * sbal[] is read-only and starts on a new cacheline followed by read mostly.
255 struct qdio_q {
256 struct slsb slsb;
258 union {
259 struct qdio_input_q in;
260 struct qdio_output_q out;
261 } u;
264 * inbound: next buffer the program should check for
265 * outbound: next buffer to check if adapter processed it
267 int first_to_check;
269 /* first_to_check of the last time */
270 int last_move;
272 /* beginning position for calling the program */
273 int first_to_kick;
275 /* number of buffers in use by the adapter */
276 atomic_t nr_buf_used;
278 /* error condition during a data transfer */
279 unsigned int qdio_error;
281 struct tasklet_struct tasklet;
282 struct qdio_queue_perf_stat q_stats;
284 struct qdio_buffer *sbal[QDIO_MAX_BUFFERS_PER_Q] ____cacheline_aligned;
286 /* queue number */
287 int nr;
289 /* bitmask of queue number */
290 int mask;
292 /* input or output queue */
293 int is_input_q;
295 /* list of thinint input queues */
296 struct list_head entry;
298 /* upper-layer program handler */
299 qdio_handler_t (*handler);
301 struct dentry *debugfs_q;
302 struct qdio_irq *irq_ptr;
303 struct sl *sl;
305 * A page is allocated under this pointer and used for slib and sl.
306 * slib is 2048 bytes big and sl points to offset PAGE_SIZE / 2.
308 struct slib *slib;
309 } __attribute__ ((aligned(256)));
311 struct qdio_irq {
312 struct qib qib;
313 u32 *dsci; /* address of device state change indicator */
314 struct ccw_device *cdev;
315 struct dentry *debugfs_dev;
316 struct dentry *debugfs_perf;
318 unsigned long int_parm;
319 struct subchannel_id schid;
320 unsigned long sch_token; /* QEBSM facility */
322 enum qdio_irq_states state;
324 struct siga_flag siga_flag; /* siga sync information from qdioac */
326 int nr_input_qs;
327 int nr_output_qs;
329 struct ccw1 ccw;
330 struct ciw equeue;
331 struct ciw aqueue;
333 struct qdio_ssqd_desc ssqd_desc;
334 void (*orig_handler) (struct ccw_device *, unsigned long, struct irb *);
336 int perf_stat_enabled;
338 struct qdr *qdr;
339 unsigned long chsc_page;
341 struct qdio_q *input_qs[QDIO_MAX_QUEUES_PER_IRQ];
342 struct qdio_q *output_qs[QDIO_MAX_QUEUES_PER_IRQ];
344 debug_info_t *debug_area;
345 struct mutex setup_mutex;
346 struct qdio_dev_perf_stat perf_stat;
349 /* helper functions */
350 #define queue_type(q) q->irq_ptr->qib.qfmt
351 #define SCH_NO(q) (q->irq_ptr->schid.sch_no)
353 #define is_thinint_irq(irq) \
354 (irq->qib.qfmt == QDIO_IQDIO_QFMT || \
355 css_general_characteristics.aif_osa)
357 #define qperf(__qdev, __attr) ((__qdev)->perf_stat.(__attr))
359 #define qperf_inc(__q, __attr) \
360 ({ \
361 struct qdio_irq *qdev = (__q)->irq_ptr; \
362 if (qdev->perf_stat_enabled) \
363 (qdev->perf_stat.__attr)++; \
366 static inline void account_sbals_error(struct qdio_q *q, int count)
368 q->q_stats.nr_sbal_error += count;
369 q->q_stats.nr_sbal_total += count;
372 /* the highest iqdio queue is used for multicast */
373 static inline int multicast_outbound(struct qdio_q *q)
375 return (q->irq_ptr->nr_output_qs > 1) &&
376 (q->nr == q->irq_ptr->nr_output_qs - 1);
379 #define pci_out_supported(q) \
380 (q->irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED)
381 #define is_qebsm(q) (q->irq_ptr->sch_token != 0)
383 #define need_siga_sync_thinint(q) (!q->irq_ptr->siga_flag.no_sync_ti)
384 #define need_siga_sync_out_thinint(q) (!q->irq_ptr->siga_flag.no_sync_out_ti)
385 #define need_siga_in(q) (q->irq_ptr->siga_flag.input)
386 #define need_siga_out(q) (q->irq_ptr->siga_flag.output)
387 #define need_siga_sync(q) (q->irq_ptr->siga_flag.sync)
388 #define siga_syncs_out_pci(q) (q->irq_ptr->siga_flag.no_sync_out_pci)
390 #define for_each_input_queue(irq_ptr, q, i) \
391 for (i = 0, q = irq_ptr->input_qs[0]; \
392 i < irq_ptr->nr_input_qs; \
393 q = irq_ptr->input_qs[++i])
394 #define for_each_output_queue(irq_ptr, q, i) \
395 for (i = 0, q = irq_ptr->output_qs[0]; \
396 i < irq_ptr->nr_output_qs; \
397 q = irq_ptr->output_qs[++i])
399 #define prev_buf(bufnr) \
400 ((bufnr + QDIO_MAX_BUFFERS_MASK) & QDIO_MAX_BUFFERS_MASK)
401 #define next_buf(bufnr) \
402 ((bufnr + 1) & QDIO_MAX_BUFFERS_MASK)
403 #define add_buf(bufnr, inc) \
404 ((bufnr + inc) & QDIO_MAX_BUFFERS_MASK)
405 #define sub_buf(bufnr, dec) \
406 ((bufnr - dec) & QDIO_MAX_BUFFERS_MASK)
408 /* prototypes for thin interrupt */
409 void qdio_setup_thinint(struct qdio_irq *irq_ptr);
410 int qdio_establish_thinint(struct qdio_irq *irq_ptr);
411 void qdio_shutdown_thinint(struct qdio_irq *irq_ptr);
412 void tiqdio_add_input_queues(struct qdio_irq *irq_ptr);
413 void tiqdio_remove_input_queues(struct qdio_irq *irq_ptr);
414 void tiqdio_inbound_processing(unsigned long q);
415 int tiqdio_allocate_memory(void);
416 void tiqdio_free_memory(void);
417 int tiqdio_register_thinints(void);
418 void tiqdio_unregister_thinints(void);
420 /* prototypes for setup */
421 void qdio_inbound_processing(unsigned long data);
422 void qdio_outbound_processing(unsigned long data);
423 void qdio_outbound_timer(unsigned long data);
424 void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
425 struct irb *irb);
426 int qdio_allocate_qs(struct qdio_irq *irq_ptr, int nr_input_qs,
427 int nr_output_qs);
428 void qdio_setup_ssqd_info(struct qdio_irq *irq_ptr);
429 int qdio_setup_get_ssqd(struct qdio_irq *irq_ptr,
430 struct subchannel_id *schid,
431 struct qdio_ssqd_desc *data);
432 int qdio_setup_irq(struct qdio_initialize *init_data);
433 void qdio_print_subchannel_info(struct qdio_irq *irq_ptr,
434 struct ccw_device *cdev);
435 void qdio_release_memory(struct qdio_irq *irq_ptr);
436 int qdio_setup_create_sysfs(struct ccw_device *cdev);
437 void qdio_setup_destroy_sysfs(struct ccw_device *cdev);
438 int qdio_setup_init(void);
439 void qdio_setup_exit(void);
441 int debug_get_buf_state(struct qdio_q *q, unsigned int bufnr,
442 unsigned char *state);
443 #endif /* _CIO_QDIO_H */