GUI: Fix Tomato RAF theme for all builds. Compilation typo.
[tomato.git] / release / src-rt-6.x.4708 / linux / linux-2.6.36 / drivers / net / wireless / libertas / defs.h
blobd00c728cec47cdd731c68ff64190c7054d374e5e
1 /**
2 * This header file contains global constant/enum definitions,
3 * global variable declaration.
4 */
5 #ifndef _LBS_DEFS_H_
6 #define _LBS_DEFS_H_
8 #include <linux/spinlock.h>
10 #ifdef CONFIG_LIBERTAS_DEBUG
11 #define DEBUG
12 #define PROC_DEBUG
13 #endif
15 #ifndef DRV_NAME
16 #define DRV_NAME "libertas"
17 #endif
20 #define LBS_DEB_ENTER 0x00000001
21 #define LBS_DEB_LEAVE 0x00000002
22 #define LBS_DEB_MAIN 0x00000004
23 #define LBS_DEB_NET 0x00000008
24 #define LBS_DEB_MESH 0x00000010
25 #define LBS_DEB_WEXT 0x00000020
26 #define LBS_DEB_IOCTL 0x00000040
27 #define LBS_DEB_SCAN 0x00000080
28 #define LBS_DEB_ASSOC 0x00000100
29 #define LBS_DEB_JOIN 0x00000200
30 #define LBS_DEB_11D 0x00000400
31 #define LBS_DEB_DEBUGFS 0x00000800
32 #define LBS_DEB_ETHTOOL 0x00001000
33 #define LBS_DEB_HOST 0x00002000
34 #define LBS_DEB_CMD 0x00004000
35 #define LBS_DEB_RX 0x00008000
36 #define LBS_DEB_TX 0x00010000
37 #define LBS_DEB_USB 0x00020000
38 #define LBS_DEB_CS 0x00040000
39 #define LBS_DEB_FW 0x00080000
40 #define LBS_DEB_THREAD 0x00100000
41 #define LBS_DEB_HEX 0x00200000
42 #define LBS_DEB_SDIO 0x00400000
43 #define LBS_DEB_SYSFS 0x00800000
44 #define LBS_DEB_SPI 0x01000000
45 #define LBS_DEB_CFG80211 0x02000000
47 extern unsigned int lbs_debug;
49 #ifdef DEBUG
50 #define LBS_DEB_LL(grp, grpnam, fmt, args...) \
51 do { if ((lbs_debug & (grp)) == (grp)) \
52 printk(KERN_DEBUG DRV_NAME grpnam "%s: " fmt, \
53 in_interrupt() ? " (INT)" : "", ## args); } while (0)
54 #else
55 #define LBS_DEB_LL(grp, grpnam, fmt, args...) do {} while (0)
56 #endif
58 #define lbs_deb_enter(grp) \
59 LBS_DEB_LL(grp | LBS_DEB_ENTER, " enter", "%s()\n", __func__);
60 #define lbs_deb_enter_args(grp, fmt, args...) \
61 LBS_DEB_LL(grp | LBS_DEB_ENTER, " enter", "%s(" fmt ")\n", __func__, ## args);
62 #define lbs_deb_leave(grp) \
63 LBS_DEB_LL(grp | LBS_DEB_LEAVE, " leave", "%s()\n", __func__);
64 #define lbs_deb_leave_args(grp, fmt, args...) \
65 LBS_DEB_LL(grp | LBS_DEB_LEAVE, " leave", "%s(), " fmt "\n", \
66 __func__, ##args);
67 #define lbs_deb_main(fmt, args...) LBS_DEB_LL(LBS_DEB_MAIN, " main", fmt, ##args)
68 #define lbs_deb_net(fmt, args...) LBS_DEB_LL(LBS_DEB_NET, " net", fmt, ##args)
69 #define lbs_deb_mesh(fmt, args...) LBS_DEB_LL(LBS_DEB_MESH, " mesh", fmt, ##args)
70 #define lbs_deb_wext(fmt, args...) LBS_DEB_LL(LBS_DEB_WEXT, " wext", fmt, ##args)
71 #define lbs_deb_ioctl(fmt, args...) LBS_DEB_LL(LBS_DEB_IOCTL, " ioctl", fmt, ##args)
72 #define lbs_deb_scan(fmt, args...) LBS_DEB_LL(LBS_DEB_SCAN, " scan", fmt, ##args)
73 #define lbs_deb_assoc(fmt, args...) LBS_DEB_LL(LBS_DEB_ASSOC, " assoc", fmt, ##args)
74 #define lbs_deb_join(fmt, args...) LBS_DEB_LL(LBS_DEB_JOIN, " join", fmt, ##args)
75 #define lbs_deb_11d(fmt, args...) LBS_DEB_LL(LBS_DEB_11D, " 11d", fmt, ##args)
76 #define lbs_deb_debugfs(fmt, args...) LBS_DEB_LL(LBS_DEB_DEBUGFS, " debugfs", fmt, ##args)
77 #define lbs_deb_ethtool(fmt, args...) LBS_DEB_LL(LBS_DEB_ETHTOOL, " ethtool", fmt, ##args)
78 #define lbs_deb_host(fmt, args...) LBS_DEB_LL(LBS_DEB_HOST, " host", fmt, ##args)
79 #define lbs_deb_cmd(fmt, args...) LBS_DEB_LL(LBS_DEB_CMD, " cmd", fmt, ##args)
80 #define lbs_deb_rx(fmt, args...) LBS_DEB_LL(LBS_DEB_RX, " rx", fmt, ##args)
81 #define lbs_deb_tx(fmt, args...) LBS_DEB_LL(LBS_DEB_TX, " tx", fmt, ##args)
82 #define lbs_deb_fw(fmt, args...) LBS_DEB_LL(LBS_DEB_FW, " fw", fmt, ##args)
83 #define lbs_deb_usb(fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usb", fmt, ##args)
84 #define lbs_deb_usbd(dev, fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usbd", "%s:" fmt, dev_name(dev), ##args)
85 #define lbs_deb_cs(fmt, args...) LBS_DEB_LL(LBS_DEB_CS, " cs", fmt, ##args)
86 #define lbs_deb_thread(fmt, args...) LBS_DEB_LL(LBS_DEB_THREAD, " thread", fmt, ##args)
87 #define lbs_deb_sdio(fmt, args...) LBS_DEB_LL(LBS_DEB_SDIO, " sdio", fmt, ##args)
88 #define lbs_deb_sysfs(fmt, args...) LBS_DEB_LL(LBS_DEB_SYSFS, " sysfs", fmt, ##args)
89 #define lbs_deb_spi(fmt, args...) LBS_DEB_LL(LBS_DEB_SPI, " spi", fmt, ##args)
90 #define lbs_deb_cfg80211(fmt, args...) LBS_DEB_LL(LBS_DEB_CFG80211, " cfg80211", fmt, ##args)
92 #define lbs_pr_info(format, args...) \
93 printk(KERN_INFO DRV_NAME": " format, ## args)
94 #define lbs_pr_err(format, args...) \
95 printk(KERN_ERR DRV_NAME": " format, ## args)
96 #define lbs_pr_alert(format, args...) \
97 printk(KERN_ALERT DRV_NAME": " format, ## args)
99 #ifdef DEBUG
100 static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, int len)
102 int i = 0;
104 if (len &&
105 (lbs_debug & LBS_DEB_HEX) &&
106 (lbs_debug & grp))
108 for (i = 1; i <= len; i++) {
109 if ((i & 0xf) == 1) {
110 if (i != 1)
111 printk("\n");
112 printk(DRV_NAME " %s: ", prompt);
114 printk("%02x ", (u8) * buf);
115 buf++;
117 printk("\n");
120 #else
121 #define lbs_deb_hex(grp,prompt,buf,len) do {} while (0)
122 #endif
126 /** Buffer Constants */
128 /* The size of SQ memory PPA, DPA are 8 DWORDs, that keep the physical
129 * addresses of TxPD buffers. Station has only 8 TxPD available, Whereas
130 * driver has more local TxPDs. Each TxPD on the host memory is associated
131 * with a Tx control node. The driver maintains 8 RxPD descriptors for
132 * station firmware to store Rx packet information.
134 * Current version of MAC has a 32x6 multicast address buffer.
136 * 802.11b can have up to 14 channels, the driver keeps the
137 * BSSID(MAC address) of each APs or Ad hoc stations it has sensed.
140 #define MRVDRV_MAX_MULTICAST_LIST_SIZE 32
141 #define LBS_NUM_CMD_BUFFERS 10
142 #define LBS_CMD_BUFFER_SIZE (2 * 1024)
143 #define MRVDRV_MAX_CHANNEL_SIZE 14
144 #define MRVDRV_ASSOCIATION_TIME_OUT 255
145 #define MRVDRV_SNAP_HEADER_LEN 8
147 #define LBS_UPLD_SIZE 2312
148 #define DEV_NAME_LEN 32
150 /* Wake criteria for HOST_SLEEP_CFG command */
151 #define EHS_WAKE_ON_BROADCAST_DATA 0x0001
152 #define EHS_WAKE_ON_UNICAST_DATA 0x0002
153 #define EHS_WAKE_ON_MAC_EVENT 0x0004
154 #define EHS_WAKE_ON_MULTICAST_DATA 0x0008
155 #define EHS_REMOVE_WAKEUP 0xFFFFFFFF
156 /* Wake rules for Host_Sleep_CFG command */
157 #define WOL_RULE_NET_TYPE_INFRA_OR_IBSS 0x00
158 #define WOL_RULE_NET_TYPE_MESH 0x10
159 #define WOL_RULE_ADDR_TYPE_BCAST 0x01
160 #define WOL_RULE_ADDR_TYPE_MCAST 0x08
161 #define WOL_RULE_ADDR_TYPE_UCAST 0x02
162 #define WOL_RULE_OP_AND 0x01
163 #define WOL_RULE_OP_OR 0x02
164 #define WOL_RULE_OP_INVALID 0xFF
165 #define WOL_RESULT_VALID_CMD 0
166 #define WOL_RESULT_NOSPC_ERR 1
167 #define WOL_RESULT_EEXIST_ERR 2
169 /** Misc constants */
170 /* This section defines 802.11 specific contants */
172 #define MRVDRV_MAX_BSS_DESCRIPTS 16
173 #define MRVDRV_MAX_REGION_CODE 6
175 #define MRVDRV_DEFAULT_LISTEN_INTERVAL 10
177 #define MRVDRV_CHANNELS_PER_SCAN 4
178 #define MRVDRV_MAX_CHANNELS_PER_SCAN 14
180 #define MRVDRV_MIN_BEACON_INTERVAL 20
181 #define MRVDRV_MAX_BEACON_INTERVAL 1000
182 #define MRVDRV_BEACON_INTERVAL 100
184 #define MARVELL_MESH_IE_LENGTH 9
186 /* Values used to populate the struct mrvl_mesh_ie. The only time you need this
187 * is when enabling the mesh using CMD_MESH_CONFIG.
189 #define MARVELL_MESH_IE_TYPE 4
190 #define MARVELL_MESH_IE_SUBTYPE 0
191 #define MARVELL_MESH_IE_VERSION 0
192 #define MARVELL_MESH_PROTO_ID_HWMP 0
193 #define MARVELL_MESH_METRIC_ID 0
194 #define MARVELL_MESH_CAPABILITY 0
196 /** INT status Bit Definition*/
197 #define MRVDRV_TX_DNLD_RDY 0x0001
198 #define MRVDRV_RX_UPLD_RDY 0x0002
199 #define MRVDRV_CMD_DNLD_RDY 0x0004
200 #define MRVDRV_CMD_UPLD_RDY 0x0008
201 #define MRVDRV_CARDEVENT 0x0010
203 /* Automatic TX control default levels */
204 #define POW_ADAPT_DEFAULT_P0 13
205 #define POW_ADAPT_DEFAULT_P1 15
206 #define POW_ADAPT_DEFAULT_P2 18
207 #define TPC_DEFAULT_P0 5
208 #define TPC_DEFAULT_P1 10
209 #define TPC_DEFAULT_P2 13
211 /** TxPD status */
213 /* Station firmware use TxPD status field to report final Tx transmit
214 * result, Bit masks are used to present combined situations.
217 #define MRVDRV_TxPD_POWER_MGMT_NULL_PACKET 0x01
218 #define MRVDRV_TxPD_POWER_MGMT_LAST_PACKET 0x08
220 /** Tx mesh flag */
221 /* Currently we are using normal WDS flag as mesh flag.
222 * TODO: change to proper mesh flag when MAC understands it.
224 #define TxPD_CONTROL_WDS_FRAME (1<<17)
225 #define TxPD_MESH_FRAME TxPD_CONTROL_WDS_FRAME
227 /** Mesh interface ID */
228 #define MESH_IFACE_ID 0x0001
229 /** Mesh id should be in bits 14-13-12 */
230 #define MESH_IFACE_BIT_OFFSET 0x000c
231 /** Mesh enable bit in FW capability */
232 #define MESH_CAPINFO_ENABLE_MASK (1<<16)
234 /** FW definition from Marvell v4 */
235 #define MRVL_FW_V4 (0x04)
236 /** FW definition from Marvell v5 */
237 #define MRVL_FW_V5 (0x05)
238 /** FW definition from Marvell v10 */
239 #define MRVL_FW_V10 (0x0a)
240 /** FW major revision definition */
241 #define MRVL_FW_MAJOR_REV(x) ((x)>>24)
243 /** RxPD status */
245 #define MRVDRV_RXPD_STATUS_OK 0x0001
247 /** RxPD status - Received packet types */
248 /** Rx mesh flag */
249 /* Currently we are using normal WDS flag as mesh flag.
250 * TODO: change to proper mesh flag when MAC understands it.
252 #define RxPD_CONTROL_WDS_FRAME (0x40)
253 #define RxPD_MESH_FRAME RxPD_CONTROL_WDS_FRAME
255 /** RSSI-related defines */
256 /* RSSI constants are used to implement 802.11 RSSI threshold
257 * indication. if the Rx packet signal got too weak for 5 consecutive
258 * times, miniport driver (driver) will report this event to wrapper
261 #define MRVDRV_NF_DEFAULT_SCAN_VALUE (-96)
263 /** RTS/FRAG related defines */
264 #define MRVDRV_RTS_MIN_VALUE 0
265 #define MRVDRV_RTS_MAX_VALUE 2347
266 #define MRVDRV_FRAG_MIN_VALUE 256
267 #define MRVDRV_FRAG_MAX_VALUE 2346
269 /* This is for firmware specific length */
270 #define EXTRA_LEN 36
272 #define MRVDRV_ETH_TX_PACKET_BUFFER_SIZE \
273 (ETH_FRAME_LEN + sizeof(struct txpd) + EXTRA_LEN)
275 #define MRVDRV_ETH_RX_PACKET_BUFFER_SIZE \
276 (ETH_FRAME_LEN + sizeof(struct rxpd) \
277 + MRVDRV_SNAP_HEADER_LEN + EXTRA_LEN)
279 #define CMD_F_HOSTCMD (1 << 0)
280 #define FW_CAPINFO_WPA (1 << 0)
281 #define FW_CAPINFO_PS (1 << 1)
282 #define FW_CAPINFO_FIRMWARE_UPGRADE (1 << 13)
283 #define FW_CAPINFO_BOOT2_UPGRADE (1<<14)
284 #define FW_CAPINFO_PERSISTENT_CONFIG (1<<15)
286 #define KEY_LEN_WPA_AES 16
287 #define KEY_LEN_WPA_TKIP 32
288 #define KEY_LEN_WEP_104 13
289 #define KEY_LEN_WEP_40 5
291 #define RF_ANTENNA_1 0x1
292 #define RF_ANTENNA_2 0x2
293 #define RF_ANTENNA_AUTO 0xFFFF
295 #define BAND_B (0x01)
296 #define BAND_G (0x02)
297 #define ALL_802_11_BANDS (BAND_B | BAND_G)
299 #define MAX_RATES 14
301 #define MAX_LEDS 8
303 /** Global Variable Declaration */
304 extern const char lbs_driver_version[];
305 extern u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE];
308 /** ENUM definition*/
309 /** SNRNF_TYPE */
310 enum SNRNF_TYPE {
311 TYPE_BEACON = 0,
312 TYPE_RXPD,
313 MAX_TYPE_B
316 /** SNRNF_DATA*/
317 enum SNRNF_DATA {
318 TYPE_NOAVG = 0,
319 TYPE_AVG,
320 MAX_TYPE_AVG
323 /** LBS_802_11_POWER_MODE */
324 enum LBS_802_11_POWER_MODE {
325 LBS802_11POWERMODECAM,
326 LBS802_11POWERMODEMAX_PSP,
327 LBS802_11POWERMODEFAST_PSP,
328 /*not a real mode, defined as an upper bound */
329 LBS802_11POWEMODEMAX
332 /** PS_STATE */
333 enum PS_STATE {
334 PS_STATE_FULL_POWER,
335 PS_STATE_AWAKE,
336 PS_STATE_PRE_SLEEP,
337 PS_STATE_SLEEP
340 /** DNLD_STATE */
341 enum DNLD_STATE {
342 DNLD_RES_RECEIVED,
343 DNLD_DATA_SENT,
344 DNLD_CMD_SENT,
345 DNLD_BOOTCMD_SENT,
348 /** LBS_MEDIA_STATE */
349 enum LBS_MEDIA_STATE {
350 LBS_CONNECTED,
351 LBS_DISCONNECTED
354 /** LBS_802_11_PRIVACY_FILTER */
355 enum LBS_802_11_PRIVACY_FILTER {
356 LBS802_11PRIVFILTERACCEPTALL,
357 LBS802_11PRIVFILTER8021XWEP
360 /** mv_ms_type */
361 enum mv_ms_type {
362 MVMS_DAT = 0,
363 MVMS_CMD = 1,
364 MVMS_TXDONE = 2,
365 MVMS_EVENT
368 /** KEY_TYPE_ID */
369 enum KEY_TYPE_ID {
370 KEY_TYPE_ID_WEP = 0,
371 KEY_TYPE_ID_TKIP,
372 KEY_TYPE_ID_AES
375 /** KEY_INFO_WPA (applies to both TKIP and AES/CCMP) */
376 enum KEY_INFO_WPA {
377 KEY_INFO_WPA_MCAST = 0x01,
378 KEY_INFO_WPA_UNICAST = 0x02,
379 KEY_INFO_WPA_ENABLED = 0x04
382 /* Default values for fwt commands. */
383 #define FWT_DEFAULT_METRIC 0
384 #define FWT_DEFAULT_DIR 1
385 /* Default Rate, 11Mbps */
386 #define FWT_DEFAULT_RATE 3
387 #define FWT_DEFAULT_SSN 0xffffffff
388 #define FWT_DEFAULT_DSN 0
389 #define FWT_DEFAULT_HOPCOUNT 0
390 #define FWT_DEFAULT_TTL 0
391 #define FWT_DEFAULT_EXPIRATION 0
392 #define FWT_DEFAULT_SLEEPMODE 0
393 #define FWT_DEFAULT_SNR 0
395 #endif