release/src-rt-6.x.4708/linux/linux-2.6.36/drivers/net/can/sja1000/kvaser_pci.c

   1 /*
   2  * Copyright (C) 2008 Per Dalen <per.dalen@cnw.se>
   3  *
   4  * Parts of this software are based on (derived) the following:
   5  *
   6  * - Kvaser linux driver, version 4.72 BETA
   7  *   Copyright (C) 2002-2007 KVASER AB
   8  *
   9  * - Lincan driver, version 0.3.3, OCERA project
  10  *   Copyright (C) 2004 Pavel Pisa
  11  *   Copyright (C) 2001 Arnaud Westenberg
  12  *
  13  * - Socketcan SJA1000 drivers
  14  *   Copyright (C) 2007 Wolfgang Grandegger <wg@grandegger.com>
  15  *   Copyright (c) 2002-2007 Volkswagen Group Electronic Research
  16  *   Copyright (c) 2003 Matthias Brukner, Trajet Gmbh, Rebenring 33,
  17  *   38106 Braunschweig, GERMANY
  18  *
  19  * This program is free software; you can redistribute it and/or modify
  20  * it under the terms of the version 2 of the GNU General Public License
  21  * as published by the Free Software Foundation
  22  *
  23  * This program is distributed in the hope that it will be useful, but
  24  * WITHOUT ANY WARRANTY; without even the implied warranty of
  25  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  26  * General Public License for more details.
  27  *
  28  * You should have received a copy of the GNU General Public License
  29  * along with this program; if not, write to the Free Software Foundation,
  30  * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  31  */
  32
  33 #include <linux/kernel.h>
  34 #include <linux/module.h>
  35 #include <linux/interrupt.h>
  36 #include <linux/netdevice.h>
  37 #include <linux/delay.h>
  38 #include <linux/pci.h>
  39 #include <linux/can/dev.h>
  40 #include <linux/io.h>
  41
  42 #include "sja1000.h"
  43
  44 #define DRV_NAME  "kvaser_pci"
  45
  46 MODULE_AUTHOR("Per Dalen <per.dalen@cnw.se>");
  47 MODULE_DESCRIPTION("Socket-CAN driver for KVASER PCAN PCI cards");
  48 MODULE_SUPPORTED_DEVICE("KVASER PCAN PCI CAN card");
  49 MODULE_LICENSE("GPL v2");
  50
  51 #define MAX_NO_OF_CHANNELS        4 /* max no of channels on a single card */
  52
  53 struct kvaser_pci {
  54         int channel;
  55         struct pci_dev *pci_dev;
  56         struct net_device *slave_dev[MAX_NO_OF_CHANNELS-1];
  57         void __iomem *conf_addr;
  58         void __iomem *res_addr;
  59         int no_channels;
  60         u8 xilinx_ver;
  61 };
  62
  63 #define KVASER_PCI_CAN_CLOCK      (16000000 / 2)
  64
  65 /*
  66  * The board configuration is probably following:
  67  * RX1 is connected to ground.
  68  * TX1 is not connected.
  69  * CLKO is not connected.
  70  * Setting the OCR register to 0xDA is a good idea.
  71  * This means  normal output mode , push-pull and the correct polarity.
  72  */
  73 #define KVASER_PCI_OCR            (OCR_TX0_PUSHPULL | OCR_TX1_PUSHPULL)
  74
  75 /*
  76  * In the CDR register, you should set CBP to 1.
  77  * You will probably also want to set the clock divider value to 0
  78  * (meaning divide-by-2), the Pelican bit, and the clock-off bit
  79  * (you will have no need for CLKOUT anyway).
  80  */
  81 #define KVASER_PCI_CDR            (CDR_CBP | CDR_CLKOUT_MASK)
  82
  83 /*
  84  * These register values are valid for revision 14 of the Xilinx logic.
  85  */
  86 #define XILINX_VERINT             7   /* Lower nibble simulate interrupts,
  87                                          high nibble version number. */
  88
  89 #define XILINX_PRESUMED_VERSION   14
  90
  91 /*
  92  * Important S5920 registers
  93  */
  94 #define S5920_INTCSR              0x38
  95 #define S5920_PTCR                0x60
  96 #define INTCSR_ADDON_INTENABLE_M  0x2000
  97
  98
  99 #define KVASER_PCI_PORT_BYTES     0x20
 100
 101 #define PCI_CONFIG_PORT_SIZE      0x80      /* size of the config io-memory */
 102 #define PCI_PORT_SIZE             0x80      /* size of a channel io-memory */
 103 #define PCI_PORT_XILINX_SIZE      0x08      /* size of a xilinx io-memory */
 104
 105 #define KVASER_PCI_VENDOR_ID1     0x10e8    /* the PCI device and vendor IDs */
 106 #define KVASER_PCI_DEVICE_ID1     0x8406
 107
 108 #define KVASER_PCI_VENDOR_ID2     0x1a07    /* the PCI device and vendor IDs */
 109 #define KVASER_PCI_DEVICE_ID2     0x0008
 110
 111 static DEFINE_PCI_DEVICE_TABLE(kvaser_pci_tbl) = {
 112         {KVASER_PCI_VENDOR_ID1, KVASER_PCI_DEVICE_ID1, PCI_ANY_ID, PCI_ANY_ID,},
 113         {KVASER_PCI_VENDOR_ID2, KVASER_PCI_DEVICE_ID2, PCI_ANY_ID, PCI_ANY_ID,},
 114         { 0,}
 115 };
 116
 117 MODULE_DEVICE_TABLE(pci, kvaser_pci_tbl);
 118
 119 static u8 kvaser_pci_read_reg(const struct sja1000_priv *priv, int port)
 120 {
 121         return ioread8(priv->reg_base + port);
 122 }
 123
 124 static void kvaser_pci_write_reg(const struct sja1000_priv *priv,
 125                                  int port, u8 val)
 126 {
 127         iowrite8(val, priv->reg_base + port);
 128 }
 129
 130 static void kvaser_pci_disable_irq(struct net_device *dev)
 131 {
 132         struct sja1000_priv *priv = netdev_priv(dev);
 133         struct kvaser_pci *board = priv->priv;
 134         u32 intcsr;
 135
 136         /* Disable interrupts from card */
 137         intcsr = ioread32(board->conf_addr + S5920_INTCSR);
 138         intcsr &= ~INTCSR_ADDON_INTENABLE_M;
 139         iowrite32(intcsr, board->conf_addr + S5920_INTCSR);
 140 }
 141
 142 static void kvaser_pci_enable_irq(struct net_device *dev)
 143 {
 144         struct sja1000_priv *priv = netdev_priv(dev);
 145         struct kvaser_pci *board = priv->priv;
 146         u32 tmp_en_io;
 147
 148         /* Enable interrupts from card */
 149         tmp_en_io = ioread32(board->conf_addr + S5920_INTCSR);
 150         tmp_en_io |= INTCSR_ADDON_INTENABLE_M;
 151         iowrite32(tmp_en_io, board->conf_addr + S5920_INTCSR);
 152 }
 153
 154 static int number_of_sja1000_chip(void __iomem *base_addr)
 155 {
 156         u8 status;
 157         int i;
 158
 159         for (i = 0; i < MAX_NO_OF_CHANNELS; i++) {
 160                 /* reset chip */
 161                 iowrite8(MOD_RM, base_addr +
 162                          (i * KVASER_PCI_PORT_BYTES) + REG_MOD);
 163                 status = ioread8(base_addr +
 164                                  (i * KVASER_PCI_PORT_BYTES) + REG_MOD);
 165                 /* check reset bit */
 166                 if (!(status & MOD_RM))
 167                         break;
 168         }
 169
 170         return i;
 171 }
 172
 173 static void kvaser_pci_del_chan(struct net_device *dev)
 174 {
 175         struct sja1000_priv *priv;
 176         struct kvaser_pci *board;
 177         int i;
 178
 179         if (!dev)
 180                 return;
 181         priv = netdev_priv(dev);
 182         board = priv->priv;
 183         if (!board)
 184                 return;
 185
 186         dev_info(&board->pci_dev->dev, "Removing device %s\n",
 187                  dev->name);
 188
 189         /* Disable PCI interrupts */
 190         kvaser_pci_disable_irq(dev);
 191
 192         for (i = 0; i < board->no_channels - 1; i++) {
 193                 if (board->slave_dev[i]) {
 194                         dev_info(&board->pci_dev->dev, "Removing device %s\n",
 195                                  board->slave_dev[i]->name);
 196                         unregister_sja1000dev(board->slave_dev[i]);
 197                         free_sja1000dev(board->slave_dev[i]);
 198                 }
 199         }
 200         unregister_sja1000dev(dev);
 201
 202         pci_iounmap(board->pci_dev, priv->reg_base);
 203         pci_iounmap(board->pci_dev, board->conf_addr);
 204         pci_iounmap(board->pci_dev, board->res_addr);
 205
 206         free_sja1000dev(dev);
 207 }
 208
 209 static int kvaser_pci_add_chan(struct pci_dev *pdev, int channel,
 210                                struct net_device **master_dev,
 211                                void __iomem *conf_addr,
 212                                void __iomem *res_addr,
 213                                void __iomem *base_addr)
 214 {
 215         struct net_device *dev;
 216         struct sja1000_priv *priv;
 217         struct kvaser_pci *board;
 218         int err, init_step;
 219
 220         dev = alloc_sja1000dev(sizeof(struct kvaser_pci));
 221         if (dev == NULL)
 222                 return -ENOMEM;
 223
 224         priv = netdev_priv(dev);
 225         board = priv->priv;
 226
 227         board->pci_dev = pdev;
 228         board->channel = channel;
 229
 230         /* S5920 */
 231         board->conf_addr = conf_addr;
 232
 233         /* XILINX board wide address */
 234         board->res_addr = res_addr;
 235
 236         if (channel == 0) {
 237                 board->xilinx_ver =
 238                         ioread8(board->res_addr + XILINX_VERINT) >> 4;
 239                 init_step = 2;
 240
 241                 /* Assert PTADR# - we're in passive mode so the other bits are
 242                    not important */
 243                 iowrite32(0x80808080UL, board->conf_addr + S5920_PTCR);
 244
 245                 /* Enable interrupts from card */
 246                 kvaser_pci_enable_irq(dev);
 247         } else {
 248                 struct sja1000_priv *master_priv = netdev_priv(*master_dev);
 249                 struct kvaser_pci *master_board = master_priv->priv;
 250                 master_board->slave_dev[channel - 1] = dev;
 251                 master_board->no_channels = channel + 1;
 252                 board->xilinx_ver = master_board->xilinx_ver;
 253         }
 254
 255         priv->reg_base = base_addr + channel * KVASER_PCI_PORT_BYTES;
 256
 257         priv->read_reg = kvaser_pci_read_reg;
 258         priv->write_reg = kvaser_pci_write_reg;
 259
 260         priv->can.clock.freq = KVASER_PCI_CAN_CLOCK;
 261
 262         priv->ocr = KVASER_PCI_OCR;
 263         priv->cdr = KVASER_PCI_CDR;
 264
 265         priv->irq_flags = IRQF_SHARED;
 266         dev->irq = pdev->irq;
 267
 268         init_step = 4;
 269
 270         dev_info(&pdev->dev, "reg_base=%p conf_addr=%p irq=%d\n",
 271                  priv->reg_base, board->conf_addr, dev->irq);
 272
 273         SET_NETDEV_DEV(dev, &pdev->dev);
 274
 275         /* Register SJA1000 device */
 276         err = register_sja1000dev(dev);
 277         if (err) {
 278                 dev_err(&pdev->dev, "Registering device failed (err=%d)\n",
 279                         err);
 280                 goto failure;
 281         }
 282
 283         if (channel == 0)
 284                 *master_dev = dev;
 285
 286         return 0;
 287
 288 failure:
 289         kvaser_pci_del_chan(dev);
 290         return err;
 291 }
 292
 293 static int __devinit kvaser_pci_init_one(struct pci_dev *pdev,
 294                                          const struct pci_device_id *ent)
 295 {
 296         int err;
 297         struct net_device *master_dev = NULL;
 298         struct sja1000_priv *priv;
 299         struct kvaser_pci *board;
 300         int no_channels;
 301         void __iomem *base_addr = NULL;
 302         void __iomem *conf_addr = NULL;
 303         void __iomem *res_addr = NULL;
 304         int i;
 305
 306         dev_info(&pdev->dev, "initializing device %04x:%04x\n",
 307                  pdev->vendor, pdev->device);
 308
 309         err = pci_enable_device(pdev);
 310         if (err)
 311                 goto failure;
 312
 313         err = pci_request_regions(pdev, DRV_NAME);
 314         if (err)
 315                 goto failure_release_pci;
 316
 317         /* S5920 */
 318         conf_addr = pci_iomap(pdev, 0, PCI_CONFIG_PORT_SIZE);
 319         if (conf_addr == NULL) {
 320                 err = -ENODEV;
 321                 goto failure_release_regions;
 322         }
 323
 324         /* XILINX board wide address */
 325         res_addr = pci_iomap(pdev, 2, PCI_PORT_XILINX_SIZE);
 326         if (res_addr == NULL) {
 327                 err = -ENOMEM;
 328                 goto failure_iounmap;
 329         }
 330
 331         base_addr = pci_iomap(pdev, 1, PCI_PORT_SIZE);
 332         if (base_addr == NULL) {
 333                 err = -ENOMEM;
 334                 goto failure_iounmap;
 335         }
 336
 337         no_channels = number_of_sja1000_chip(base_addr);
 338         if (no_channels == 0) {
 339                 err = -ENOMEM;
 340                 goto failure_iounmap;
 341         }
 342
 343         for (i = 0; i < no_channels; i++) {
 344                 err = kvaser_pci_add_chan(pdev, i, &master_dev,
 345                                           conf_addr, res_addr,
 346                                           base_addr);
 347                 if (err)
 348                         goto failure_cleanup;
 349         }
 350
 351         priv = netdev_priv(master_dev);
 352         board = priv->priv;
 353
 354         dev_info(&pdev->dev, "xilinx version=%d number of channels=%d\n",
 355                  board->xilinx_ver, board->no_channels);
 356
 357         pci_set_drvdata(pdev, master_dev);
 358         return 0;
 359
 360 failure_cleanup:
 361         kvaser_pci_del_chan(master_dev);
 362
 363 failure_iounmap:
 364         if (conf_addr != NULL)
 365                 pci_iounmap(pdev, conf_addr);
 366         if (res_addr != NULL)
 367                 pci_iounmap(pdev, res_addr);
 368         if (base_addr != NULL)
 369                 pci_iounmap(pdev, base_addr);
 370
 371 failure_release_regions:
 372         pci_release_regions(pdev);
 373
 374 failure_release_pci:
 375         pci_disable_device(pdev);
 376
 377 failure:
 378         return err;
 379
 380 }
 381
 382 static void __devexit kvaser_pci_remove_one(struct pci_dev *pdev)
 383 {
 384         struct net_device *dev = pci_get_drvdata(pdev);
 385
 386         kvaser_pci_del_chan(dev);
 387
 388         pci_release_regions(pdev);
 389         pci_disable_device(pdev);
 390         pci_set_drvdata(pdev, NULL);
 391 }
 392
 393 static struct pci_driver kvaser_pci_driver = {
 394         .name = DRV_NAME,
 395         .id_table = kvaser_pci_tbl,
 396         .probe = kvaser_pci_init_one,
 397         .remove = __devexit_p(kvaser_pci_remove_one),
 398 };
 399
 400 static int __init kvaser_pci_init(void)
 401 {
 402         return pci_register_driver(&kvaser_pci_driver);
 403 }
 404
 405 static void __exit kvaser_pci_exit(void)
 406 {
 407         pci_unregister_driver(&kvaser_pci_driver);
 408 }
 409
 410 module_init(kvaser_pci_init);
 411 module_exit(kvaser_pci_exit);