release/src-rt-6.x.4708/linux/linux-2.6.36/drivers/net/bnx2x/bnx2x_link.h

   1 /* Copyright 2008-2009 Broadcom Corporation
   2  *
   3  * Unless you and Broadcom execute a separate written software license
   4  * agreement governing use of this software, this software is licensed to you
   5  * under the terms of the GNU General Public License version 2, available
   6  * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL").
   7  *
   8  * Notwithstanding the above, under no circumstances may you combine this
   9  * software in any way with any other Broadcom software provided under a
  10  * license other than the GPL, without Broadcom's express prior written
  11  * consent.
  12  *
  13  * Written by Yaniv Rosner
  14  *
  15  */
  16
  17 #ifndef BNX2X_LINK_H
  18 #define BNX2X_LINK_H
  19
  20
  21
  22 /***********************************************************/
  23 /*                         Defines                         */
  24 /***********************************************************/
  25 #define DEFAULT_PHY_DEV_ADDR 3
  26
  27
  28
  29 #define BNX2X_FLOW_CTRL_AUTO            PORT_FEATURE_FLOW_CONTROL_AUTO
  30 #define BNX2X_FLOW_CTRL_TX              PORT_FEATURE_FLOW_CONTROL_TX
  31 #define BNX2X_FLOW_CTRL_RX              PORT_FEATURE_FLOW_CONTROL_RX
  32 #define BNX2X_FLOW_CTRL_BOTH            PORT_FEATURE_FLOW_CONTROL_BOTH
  33 #define BNX2X_FLOW_CTRL_NONE            PORT_FEATURE_FLOW_CONTROL_NONE
  34
  35 #define SPEED_AUTO_NEG      0
  36 #define SPEED_12000             12000
  37 #define SPEED_12500             12500
  38 #define SPEED_13000             13000
  39 #define SPEED_15000             15000
  40 #define SPEED_16000             16000
  41
  42 #define SFP_EEPROM_VENDOR_NAME_ADDR             0x14
  43 #define SFP_EEPROM_VENDOR_NAME_SIZE             16
  44 #define SFP_EEPROM_VENDOR_OUI_ADDR              0x25
  45 #define SFP_EEPROM_VENDOR_OUI_SIZE              3
  46 #define SFP_EEPROM_PART_NO_ADDR                 0x28
  47 #define SFP_EEPROM_PART_NO_SIZE         16
  48 #define PWR_FLT_ERR_MSG_LEN                     250
  49 /***********************************************************/
  50 /*                         Structs                         */
  51 /***********************************************************/
  52 /* Inputs parameters to the CLC */
  53 struct link_params {
  54
  55         u8 port;
  56
  57         /* Default / User Configuration */
  58         u8 loopback_mode;
  59 #define LOOPBACK_NONE   0
  60 #define LOOPBACK_EMAC   1
  61 #define LOOPBACK_BMAC   2
  62 #define LOOPBACK_XGXS_10        3
  63 #define LOOPBACK_EXT_PHY        4
  64 #define LOOPBACK_EXT    5
  65
  66         u16 req_duplex;
  67         u16 req_flow_ctrl;
  68         u16 req_fc_auto_adv; /* Should be set to TX / BOTH when
  69         req_flow_ctrl is set to AUTO */
  70         u16 req_line_speed; /* Also determine AutoNeg */
  71
  72         /* Device parameters */
  73         u8 mac_addr[6];
  74
  75         /* shmem parameters */
  76         u32 shmem_base;
  77         u32 speed_cap_mask;
  78         u32 switch_cfg;
  79 #define SWITCH_CFG_1G           PORT_FEATURE_CON_SWITCH_1G_SWITCH
  80 #define SWITCH_CFG_10G          PORT_FEATURE_CON_SWITCH_10G_SWITCH
  81 #define SWITCH_CFG_AUTO_DETECT  PORT_FEATURE_CON_SWITCH_AUTO_DETECT
  82
  83         u16 hw_led_mode; /* part of the hw_config read from the shmem */
  84
  85         /* phy_addr populated by the phy_init function */
  86         u8 phy_addr;
  87         /*u8 reserved1;*/
  88
  89         u32 lane_config;
  90         u32 ext_phy_config;
  91 #define XGXS_EXT_PHY_TYPE(ext_phy_config) \
  92                 ((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK)
  93 #define XGXS_EXT_PHY_ADDR(ext_phy_config) \
  94                 (((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> \
  95                  PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT)
  96 #define SERDES_EXT_PHY_TYPE(ext_phy_config) \
  97                 ((ext_phy_config) & PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK)
  98
  99         /* Phy register parameter */
 100         u32 chip_id;
 101
 102         u16 xgxs_config_rx[4]; /* preemphasis values for the rx side */
 103         u16 xgxs_config_tx[4]; /* preemphasis values for the tx side */
 104
 105         u32 feature_config_flags;
 106 #define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0)
 107 #define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2)
 108 #define FEATURE_CONFIG_BCM8727_NOC                      (1<<3)
 109
 110         /* Device pointer passed to all callback functions */
 111         struct bnx2x *bp;
 112 };
 113
 114 /* Output parameters */
 115 struct link_vars {
 116         u8 phy_flags;
 117
 118         u8 mac_type;
 119 #define MAC_TYPE_NONE           0
 120 #define MAC_TYPE_EMAC           1
 121 #define MAC_TYPE_BMAC           2
 122
 123         u8 phy_link_up; /* internal phy link indication */
 124         u8 link_up;
 125
 126         u16 line_speed;
 127         u16 duplex;
 128
 129         u16 flow_ctrl;
 130         u16 ieee_fc;
 131
 132         u32 autoneg;
 133 #define AUTO_NEG_DISABLED                       0x0
 134 #define AUTO_NEG_ENABLED                        0x1
 135 #define AUTO_NEG_COMPLETE                       0x2
 136 #define AUTO_NEG_PARALLEL_DETECTION_USED        0x3
 137
 138         /* The same definitions as the shmem parameter */
 139         u32 link_status;
 140 };
 141
 142 /***********************************************************/
 143 /*                         Functions                       */
 144 /***********************************************************/
 145
 146 /* Initialize the phy */
 147 u8 bnx2x_phy_init(struct link_params *input, struct link_vars *output);
 148
 149 /* Reset the link. Should be called when driver or interface goes down
 150    Before calling phy firmware upgrade, the reset_ext_phy should be set
 151    to 0 */
 152 u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
 153                   u8 reset_ext_phy);
 154
 155 /* bnx2x_link_update should be called upon link interrupt */
 156 u8 bnx2x_link_update(struct link_params *input, struct link_vars *output);
 157
 158 /* use the following cl45 functions to read/write from external_phy
 159   In order to use it to read/write internal phy registers, use
 160   DEFAULT_PHY_DEV_ADDR as devad, and (_bank + (_addr & 0xf)) as
 161   Use ext_phy_type of 0 in case of cl22 over cl45
 162   the register */
 163 u8 bnx2x_cl45_read(struct bnx2x *bp, u8 port, u32 ext_phy_type,
 164                  u8 phy_addr, u8 devad, u16 reg, u16 *ret_val);
 165
 166 u8 bnx2x_cl45_write(struct bnx2x *bp, u8 port, u32 ext_phy_type,
 167                   u8 phy_addr, u8 devad, u16 reg, u16 val);
 168
 169 /* Reads the link_status from the shmem,
 170    and update the link vars accordingly */
 171 void bnx2x_link_status_update(struct link_params *input,
 172                             struct link_vars *output);
 173 /* returns string representing the fw_version of the external phy */
 174 u8 bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded,
 175                               u8 *version, u16 len);
 176
 177 /* Set/Unset the led
 178    Basically, the CLC takes care of the led for the link, but in case one needs
 179    to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to
 180    blink the led, and LED_MODE_OFF to set the led off.*/
 181 u8 bnx2x_set_led(struct link_params *params, u8 mode, u32 speed);
 182 #define LED_MODE_OFF    0
 183 #define LED_MODE_OPER   2
 184
 185 u8 bnx2x_override_led_value(struct bnx2x *bp, u8 port, u32 led_idx, u32 value);
 186
 187 /* bnx2x_handle_module_detect_int should be called upon module detection
 188    interrupt */
 189 void bnx2x_handle_module_detect_int(struct link_params *params);
 190
 191 /* Get the actual link status. In case it returns 0, link is up,
 192         otherwise link is down*/
 193 u8 bnx2x_test_link(struct link_params *input, struct link_vars *vars);
 194
 195 /* One-time initialization for external phy after power up */
 196 u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base);
 197
 198 /* Reset the external PHY using GPIO */
 199 void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port);
 200
 201 void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, u8 port, u8 phy_addr);
 202
 203 u8 bnx2x_read_sfp_module_eeprom(struct link_params *params, u16 addr,
 204                               u8 byte_cnt, u8 *o_buf);
 205
 206 #endif /* BNX2X_LINK_H */