GUI: Fix Tomato RAF theme for all builds. Compilation typo.
[tomato.git] / release / src-rt-6.x.4708 / linux / linux-2.6.36 / drivers / net / bfin_mac.c
blob99f6b025a19ec4ca06258ad87631c9086a663f70
1 /*
2 * Blackfin On-Chip MAC Driver
4 * Copyright 2004-2007 Analog Devices Inc.
6 * Enter bugs at http://blackfin.uclinux.org/
8 * Licensed under the GPL-2 or later.
9 */
11 #include <linux/init.h>
12 #include <linux/module.h>
13 #include <linux/kernel.h>
14 #include <linux/sched.h>
15 #include <linux/slab.h>
16 #include <linux/delay.h>
17 #include <linux/timer.h>
18 #include <linux/errno.h>
19 #include <linux/irq.h>
20 #include <linux/io.h>
21 #include <linux/ioport.h>
22 #include <linux/crc32.h>
23 #include <linux/device.h>
24 #include <linux/spinlock.h>
25 #include <linux/mii.h>
26 #include <linux/phy.h>
27 #include <linux/netdevice.h>
28 #include <linux/etherdevice.h>
29 #include <linux/ethtool.h>
30 #include <linux/skbuff.h>
31 #include <linux/platform_device.h>
33 #include <asm/dma.h>
34 #include <linux/dma-mapping.h>
36 #include <asm/div64.h>
37 #include <asm/dpmc.h>
38 #include <asm/blackfin.h>
39 #include <asm/cacheflush.h>
40 #include <asm/portmux.h>
42 #include "bfin_mac.h"
44 #define DRV_NAME "bfin_mac"
45 #define DRV_VERSION "1.1"
46 #define DRV_AUTHOR "Bryan Wu, Luke Yang"
47 #define DRV_DESC "Blackfin on-chip Ethernet MAC driver"
49 MODULE_AUTHOR(DRV_AUTHOR);
50 MODULE_LICENSE("GPL");
51 MODULE_DESCRIPTION(DRV_DESC);
52 MODULE_ALIAS("platform:bfin_mac");
54 #if defined(CONFIG_BFIN_MAC_USE_L1)
55 # define bfin_mac_alloc(dma_handle, size) l1_data_sram_zalloc(size)
56 # define bfin_mac_free(dma_handle, ptr) l1_data_sram_free(ptr)
57 #else
58 # define bfin_mac_alloc(dma_handle, size) \
59 dma_alloc_coherent(NULL, size, dma_handle, GFP_KERNEL)
60 # define bfin_mac_free(dma_handle, ptr) \
61 dma_free_coherent(NULL, sizeof(*ptr), ptr, dma_handle)
62 #endif
64 #define PKT_BUF_SZ 1580
66 #define MAX_TIMEOUT_CNT 500
68 /* pointers to maintain transmit list */
69 static struct net_dma_desc_tx *tx_list_head;
70 static struct net_dma_desc_tx *tx_list_tail;
71 static struct net_dma_desc_rx *rx_list_head;
72 static struct net_dma_desc_rx *rx_list_tail;
73 static struct net_dma_desc_rx *current_rx_ptr;
74 static struct net_dma_desc_tx *current_tx_ptr;
75 static struct net_dma_desc_tx *tx_desc;
76 static struct net_dma_desc_rx *rx_desc;
78 #if defined(CONFIG_BFIN_MAC_RMII)
79 static u16 pin_req[] = P_RMII0;
80 #else
81 static u16 pin_req[] = P_MII0;
82 #endif
84 static void desc_list_free(void)
86 struct net_dma_desc_rx *r;
87 struct net_dma_desc_tx *t;
88 int i;
89 #if !defined(CONFIG_BFIN_MAC_USE_L1)
90 dma_addr_t dma_handle = 0;
91 #endif
93 if (tx_desc) {
94 t = tx_list_head;
95 for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) {
96 if (t) {
97 if (t->skb) {
98 dev_kfree_skb(t->skb);
99 t->skb = NULL;
101 t = t->next;
104 bfin_mac_free(dma_handle, tx_desc);
107 if (rx_desc) {
108 r = rx_list_head;
109 for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) {
110 if (r) {
111 if (r->skb) {
112 dev_kfree_skb(r->skb);
113 r->skb = NULL;
115 r = r->next;
118 bfin_mac_free(dma_handle, rx_desc);
122 static int desc_list_init(void)
124 int i;
125 struct sk_buff *new_skb;
126 #if !defined(CONFIG_BFIN_MAC_USE_L1)
128 * This dma_handle is useless in Blackfin dma_alloc_coherent().
129 * The real dma handler is the return value of dma_alloc_coherent().
131 dma_addr_t dma_handle;
132 #endif
134 tx_desc = bfin_mac_alloc(&dma_handle,
135 sizeof(struct net_dma_desc_tx) *
136 CONFIG_BFIN_TX_DESC_NUM);
137 if (tx_desc == NULL)
138 goto init_error;
140 rx_desc = bfin_mac_alloc(&dma_handle,
141 sizeof(struct net_dma_desc_rx) *
142 CONFIG_BFIN_RX_DESC_NUM);
143 if (rx_desc == NULL)
144 goto init_error;
146 /* init tx_list */
147 tx_list_head = tx_list_tail = tx_desc;
149 for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) {
150 struct net_dma_desc_tx *t = tx_desc + i;
151 struct dma_descriptor *a = &(t->desc_a);
152 struct dma_descriptor *b = &(t->desc_b);
155 * disable DMA
156 * read from memory WNR = 0
157 * wordsize is 32 bits
158 * 6 half words is desc size
159 * large desc flow
161 a->config = WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
162 a->start_addr = (unsigned long)t->packet;
163 a->x_count = 0;
164 a->next_dma_desc = b;
167 * enabled DMA
168 * write to memory WNR = 1
169 * wordsize is 32 bits
170 * disable interrupt
171 * 6 half words is desc size
172 * large desc flow
174 b->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
175 b->start_addr = (unsigned long)(&(t->status));
176 b->x_count = 0;
178 t->skb = NULL;
179 tx_list_tail->desc_b.next_dma_desc = a;
180 tx_list_tail->next = t;
181 tx_list_tail = t;
183 tx_list_tail->next = tx_list_head; /* tx_list is a circle */
184 tx_list_tail->desc_b.next_dma_desc = &(tx_list_head->desc_a);
185 current_tx_ptr = tx_list_head;
187 /* init rx_list */
188 rx_list_head = rx_list_tail = rx_desc;
190 for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) {
191 struct net_dma_desc_rx *r = rx_desc + i;
192 struct dma_descriptor *a = &(r->desc_a);
193 struct dma_descriptor *b = &(r->desc_b);
195 /* allocate a new skb for next time receive */
196 new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
197 if (!new_skb) {
198 printk(KERN_NOTICE DRV_NAME
199 ": init: low on mem - packet dropped\n");
200 goto init_error;
202 skb_reserve(new_skb, NET_IP_ALIGN);
203 /* Invidate the data cache of skb->data range when it is write back
204 * cache. It will prevent overwritting the new data from DMA
206 blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
207 (unsigned long)new_skb->end);
208 r->skb = new_skb;
211 * enabled DMA
212 * write to memory WNR = 1
213 * wordsize is 32 bits
214 * disable interrupt
215 * 6 half words is desc size
216 * large desc flow
218 a->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE;
219 /* since RXDWA is enabled */
220 a->start_addr = (unsigned long)new_skb->data - 2;
221 a->x_count = 0;
222 a->next_dma_desc = b;
225 * enabled DMA
226 * write to memory WNR = 1
227 * wordsize is 32 bits
228 * enable interrupt
229 * 6 half words is desc size
230 * large desc flow
232 b->config = DMAEN | WNR | WDSIZE_32 | DI_EN |
233 NDSIZE_6 | DMAFLOW_LARGE;
234 b->start_addr = (unsigned long)(&(r->status));
235 b->x_count = 0;
237 rx_list_tail->desc_b.next_dma_desc = a;
238 rx_list_tail->next = r;
239 rx_list_tail = r;
241 rx_list_tail->next = rx_list_head; /* rx_list is a circle */
242 rx_list_tail->desc_b.next_dma_desc = &(rx_list_head->desc_a);
243 current_rx_ptr = rx_list_head;
245 return 0;
247 init_error:
248 desc_list_free();
249 printk(KERN_ERR DRV_NAME ": kmalloc failed\n");
250 return -ENOMEM;
254 /*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/
257 * MII operations
259 /* Wait until the previous MDC/MDIO transaction has completed */
260 static int bfin_mdio_poll(void)
262 int timeout_cnt = MAX_TIMEOUT_CNT;
264 /* poll the STABUSY bit */
265 while ((bfin_read_EMAC_STAADD()) & STABUSY) {
266 udelay(1);
267 if (timeout_cnt-- < 0) {
268 printk(KERN_ERR DRV_NAME
269 ": wait MDC/MDIO transaction to complete timeout\n");
270 return -ETIMEDOUT;
274 return 0;
277 /* Read an off-chip register in a PHY through the MDC/MDIO port */
278 static int bfin_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
280 int ret;
282 ret = bfin_mdio_poll();
283 if (ret)
284 return ret;
286 /* read mode */
287 bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) |
288 SET_REGAD((u16) regnum) |
289 STABUSY);
291 ret = bfin_mdio_poll();
292 if (ret)
293 return ret;
295 return (int) bfin_read_EMAC_STADAT();
298 /* Write an off-chip register in a PHY through the MDC/MDIO port */
299 static int bfin_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum,
300 u16 value)
302 int ret;
304 ret = bfin_mdio_poll();
305 if (ret)
306 return ret;
308 bfin_write_EMAC_STADAT((u32) value);
310 /* write mode */
311 bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) |
312 SET_REGAD((u16) regnum) |
313 STAOP |
314 STABUSY);
316 return bfin_mdio_poll();
319 static int bfin_mdiobus_reset(struct mii_bus *bus)
321 return 0;
324 static void bfin_mac_adjust_link(struct net_device *dev)
326 struct bfin_mac_local *lp = netdev_priv(dev);
327 struct phy_device *phydev = lp->phydev;
328 unsigned long flags;
329 int new_state = 0;
331 spin_lock_irqsave(&lp->lock, flags);
332 if (phydev->link) {
333 /* Now we make sure that we can be in full duplex mode.
334 * If not, we operate in half-duplex mode. */
335 if (phydev->duplex != lp->old_duplex) {
336 u32 opmode = bfin_read_EMAC_OPMODE();
337 new_state = 1;
339 if (phydev->duplex)
340 opmode |= FDMODE;
341 else
342 opmode &= ~(FDMODE);
344 bfin_write_EMAC_OPMODE(opmode);
345 lp->old_duplex = phydev->duplex;
348 if (phydev->speed != lp->old_speed) {
349 #if defined(CONFIG_BFIN_MAC_RMII)
350 u32 opmode = bfin_read_EMAC_OPMODE();
351 switch (phydev->speed) {
352 case 10:
353 opmode |= RMII_10;
354 break;
355 case 100:
356 opmode &= ~(RMII_10);
357 break;
358 default:
359 printk(KERN_WARNING
360 "%s: Ack! Speed (%d) is not 10/100!\n",
361 DRV_NAME, phydev->speed);
362 break;
364 bfin_write_EMAC_OPMODE(opmode);
365 #endif
367 new_state = 1;
368 lp->old_speed = phydev->speed;
371 if (!lp->old_link) {
372 new_state = 1;
373 lp->old_link = 1;
375 } else if (lp->old_link) {
376 new_state = 1;
377 lp->old_link = 0;
378 lp->old_speed = 0;
379 lp->old_duplex = -1;
382 if (new_state) {
383 u32 opmode = bfin_read_EMAC_OPMODE();
384 phy_print_status(phydev);
385 pr_debug("EMAC_OPMODE = 0x%08x\n", opmode);
388 spin_unlock_irqrestore(&lp->lock, flags);
391 /* MDC = 2.5 MHz */
392 #define MDC_CLK 2500000
394 static int mii_probe(struct net_device *dev)
396 struct bfin_mac_local *lp = netdev_priv(dev);
397 struct phy_device *phydev = NULL;
398 unsigned short sysctl;
399 int i;
400 u32 sclk, mdc_div;
402 /* Enable PHY output early */
403 if (!(bfin_read_VR_CTL() & CLKBUFOE))
404 bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE);
406 sclk = get_sclk();
407 mdc_div = ((sclk / MDC_CLK) / 2) - 1;
409 sysctl = bfin_read_EMAC_SYSCTL();
410 sysctl = (sysctl & ~MDCDIV) | SET_MDCDIV(mdc_div);
411 bfin_write_EMAC_SYSCTL(sysctl);
413 /* search for connect PHY device */
414 for (i = 0; i < PHY_MAX_ADDR; i++) {
415 struct phy_device *const tmp_phydev = lp->mii_bus->phy_map[i];
417 if (!tmp_phydev)
418 continue; /* no PHY here... */
420 phydev = tmp_phydev;
421 break; /* found it */
424 /* now we are supposed to have a proper phydev, to attach to... */
425 if (!phydev) {
426 printk(KERN_INFO "%s: Don't found any phy device at all\n",
427 dev->name);
428 return -ENODEV;
431 #if defined(CONFIG_BFIN_MAC_RMII)
432 phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link,
433 0, PHY_INTERFACE_MODE_RMII);
434 #else
435 phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link,
436 0, PHY_INTERFACE_MODE_MII);
437 #endif
439 if (IS_ERR(phydev)) {
440 printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
441 return PTR_ERR(phydev);
444 /* mask with MAC supported features */
445 phydev->supported &= (SUPPORTED_10baseT_Half
446 | SUPPORTED_10baseT_Full
447 | SUPPORTED_100baseT_Half
448 | SUPPORTED_100baseT_Full
449 | SUPPORTED_Autoneg
450 | SUPPORTED_Pause | SUPPORTED_Asym_Pause
451 | SUPPORTED_MII
452 | SUPPORTED_TP);
454 phydev->advertising = phydev->supported;
456 lp->old_link = 0;
457 lp->old_speed = 0;
458 lp->old_duplex = -1;
459 lp->phydev = phydev;
461 printk(KERN_INFO "%s: attached PHY driver [%s] "
462 "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)"
463 "@sclk=%dMHz)\n",
464 DRV_NAME, phydev->drv->name, dev_name(&phydev->dev), phydev->irq,
465 MDC_CLK, mdc_div, sclk/1000000);
467 return 0;
471 * Ethtool support
475 * interrupt routine for magic packet wakeup
477 static irqreturn_t bfin_mac_wake_interrupt(int irq, void *dev_id)
479 return IRQ_HANDLED;
482 static int
483 bfin_mac_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
485 struct bfin_mac_local *lp = netdev_priv(dev);
487 if (lp->phydev)
488 return phy_ethtool_gset(lp->phydev, cmd);
490 return -EINVAL;
493 static int
494 bfin_mac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
496 struct bfin_mac_local *lp = netdev_priv(dev);
498 if (!capable(CAP_NET_ADMIN))
499 return -EPERM;
501 if (lp->phydev)
502 return phy_ethtool_sset(lp->phydev, cmd);
504 return -EINVAL;
507 static void bfin_mac_ethtool_getdrvinfo(struct net_device *dev,
508 struct ethtool_drvinfo *info)
510 strcpy(info->driver, DRV_NAME);
511 strcpy(info->version, DRV_VERSION);
512 strcpy(info->fw_version, "N/A");
513 strcpy(info->bus_info, dev_name(&dev->dev));
516 static void bfin_mac_ethtool_getwol(struct net_device *dev,
517 struct ethtool_wolinfo *wolinfo)
519 struct bfin_mac_local *lp = netdev_priv(dev);
521 wolinfo->supported = WAKE_MAGIC;
522 wolinfo->wolopts = lp->wol;
525 static int bfin_mac_ethtool_setwol(struct net_device *dev,
526 struct ethtool_wolinfo *wolinfo)
528 struct bfin_mac_local *lp = netdev_priv(dev);
529 int rc;
531 if (wolinfo->wolopts & (WAKE_MAGICSECURE |
532 WAKE_UCAST |
533 WAKE_MCAST |
534 WAKE_BCAST |
535 WAKE_ARP))
536 return -EOPNOTSUPP;
538 lp->wol = wolinfo->wolopts;
540 if (lp->wol && !lp->irq_wake_requested) {
541 /* register wake irq handler */
542 rc = request_irq(IRQ_MAC_WAKEDET, bfin_mac_wake_interrupt,
543 IRQF_DISABLED, "EMAC_WAKE", dev);
544 if (rc)
545 return rc;
546 lp->irq_wake_requested = true;
549 if (!lp->wol && lp->irq_wake_requested) {
550 free_irq(IRQ_MAC_WAKEDET, dev);
551 lp->irq_wake_requested = false;
554 /* Make sure the PHY driver doesn't suspend */
555 device_init_wakeup(&dev->dev, lp->wol);
557 return 0;
560 static const struct ethtool_ops bfin_mac_ethtool_ops = {
561 .get_settings = bfin_mac_ethtool_getsettings,
562 .set_settings = bfin_mac_ethtool_setsettings,
563 .get_link = ethtool_op_get_link,
564 .get_drvinfo = bfin_mac_ethtool_getdrvinfo,
565 .get_wol = bfin_mac_ethtool_getwol,
566 .set_wol = bfin_mac_ethtool_setwol,
569 /**************************************************************************/
570 void setup_system_regs(struct net_device *dev)
572 unsigned short sysctl;
575 * Odd word alignment for Receive Frame DMA word
576 * Configure checksum support and rcve frame word alignment
578 sysctl = bfin_read_EMAC_SYSCTL();
579 sysctl |= RXDWA;
580 #if defined(BFIN_MAC_CSUM_OFFLOAD)
581 sysctl |= RXCKS;
582 #else
583 sysctl &= ~RXCKS;
584 #endif
585 bfin_write_EMAC_SYSCTL(sysctl);
587 bfin_write_EMAC_MMC_CTL(RSTC | CROLL);
589 /* Initialize the TX DMA channel registers */
590 bfin_write_DMA2_X_COUNT(0);
591 bfin_write_DMA2_X_MODIFY(4);
592 bfin_write_DMA2_Y_COUNT(0);
593 bfin_write_DMA2_Y_MODIFY(0);
595 /* Initialize the RX DMA channel registers */
596 bfin_write_DMA1_X_COUNT(0);
597 bfin_write_DMA1_X_MODIFY(4);
598 bfin_write_DMA1_Y_COUNT(0);
599 bfin_write_DMA1_Y_MODIFY(0);
602 static void setup_mac_addr(u8 *mac_addr)
604 u32 addr_low = le32_to_cpu(*(__le32 *) & mac_addr[0]);
605 u16 addr_hi = le16_to_cpu(*(__le16 *) & mac_addr[4]);
607 /* this depends on a little-endian machine */
608 bfin_write_EMAC_ADDRLO(addr_low);
609 bfin_write_EMAC_ADDRHI(addr_hi);
612 static int bfin_mac_set_mac_address(struct net_device *dev, void *p)
614 struct sockaddr *addr = p;
615 if (netif_running(dev))
616 return -EBUSY;
617 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
618 setup_mac_addr(dev->dev_addr);
619 return 0;
622 #ifdef CONFIG_BFIN_MAC_USE_HWSTAMP
623 #define bfin_mac_hwtstamp_is_none(cfg) ((cfg) == HWTSTAMP_FILTER_NONE)
625 static int bfin_mac_hwtstamp_ioctl(struct net_device *netdev,
626 struct ifreq *ifr, int cmd)
628 struct hwtstamp_config config;
629 struct bfin_mac_local *lp = netdev_priv(netdev);
630 u16 ptpctl;
631 u32 ptpfv1, ptpfv2, ptpfv3, ptpfoff;
633 if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
634 return -EFAULT;
636 pr_debug("%s config flag:0x%x, tx_type:0x%x, rx_filter:0x%x\n",
637 __func__, config.flags, config.tx_type, config.rx_filter);
639 /* reserved for future extensions */
640 if (config.flags)
641 return -EINVAL;
643 if ((config.tx_type != HWTSTAMP_TX_OFF) &&
644 (config.tx_type != HWTSTAMP_TX_ON))
645 return -ERANGE;
647 ptpctl = bfin_read_EMAC_PTP_CTL();
649 switch (config.rx_filter) {
650 case HWTSTAMP_FILTER_NONE:
652 * Dont allow any timestamping
654 ptpfv3 = 0xFFFFFFFF;
655 bfin_write_EMAC_PTP_FV3(ptpfv3);
656 break;
657 case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
658 case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
659 case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
661 * Clear the five comparison mask bits (bits[12:8]) in EMAC_PTP_CTL)
662 * to enable all the field matches.
664 ptpctl &= ~0x1F00;
665 bfin_write_EMAC_PTP_CTL(ptpctl);
667 * Keep the default values of the EMAC_PTP_FOFF register.
669 ptpfoff = 0x4A24170C;
670 bfin_write_EMAC_PTP_FOFF(ptpfoff);
672 * Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2
673 * registers.
675 ptpfv1 = 0x11040800;
676 bfin_write_EMAC_PTP_FV1(ptpfv1);
677 ptpfv2 = 0x0140013F;
678 bfin_write_EMAC_PTP_FV2(ptpfv2);
680 * The default value (0xFFFC) allows the timestamping of both
681 * received Sync messages and Delay_Req messages.
683 ptpfv3 = 0xFFFFFFFC;
684 bfin_write_EMAC_PTP_FV3(ptpfv3);
686 config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
687 break;
688 case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
689 case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
690 case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
691 /* Clear all five comparison mask bits (bits[12:8]) in the
692 * EMAC_PTP_CTL register to enable all the field matches.
694 ptpctl &= ~0x1F00;
695 bfin_write_EMAC_PTP_CTL(ptpctl);
697 * Keep the default values of the EMAC_PTP_FOFF register, except set
698 * the PTPCOF field to 0x2A.
700 ptpfoff = 0x2A24170C;
701 bfin_write_EMAC_PTP_FOFF(ptpfoff);
703 * Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2
704 * registers.
706 ptpfv1 = 0x11040800;
707 bfin_write_EMAC_PTP_FV1(ptpfv1);
708 ptpfv2 = 0x0140013F;
709 bfin_write_EMAC_PTP_FV2(ptpfv2);
711 * To allow the timestamping of Pdelay_Req and Pdelay_Resp, set
712 * the value to 0xFFF0.
714 ptpfv3 = 0xFFFFFFF0;
715 bfin_write_EMAC_PTP_FV3(ptpfv3);
717 config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT;
718 break;
719 case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
720 case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
721 case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
723 * Clear bits 8 and 12 of the EMAC_PTP_CTL register to enable only the
724 * EFTM and PTPCM field comparison.
726 ptpctl &= ~0x1100;
727 bfin_write_EMAC_PTP_CTL(ptpctl);
729 * Keep the default values of all the fields of the EMAC_PTP_FOFF
730 * register, except set the PTPCOF field to 0x0E.
732 ptpfoff = 0x0E24170C;
733 bfin_write_EMAC_PTP_FOFF(ptpfoff);
735 * Program bits [15:0] of the EMAC_PTP_FV1 register to 0x88F7, which
736 * corresponds to PTP messages on the MAC layer.
738 ptpfv1 = 0x110488F7;
739 bfin_write_EMAC_PTP_FV1(ptpfv1);
740 ptpfv2 = 0x0140013F;
741 bfin_write_EMAC_PTP_FV2(ptpfv2);
743 * To allow the timestamping of Pdelay_Req and Pdelay_Resp
744 * messages, set the value to 0xFFF0.
746 ptpfv3 = 0xFFFFFFF0;
747 bfin_write_EMAC_PTP_FV3(ptpfv3);
749 config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT;
750 break;
751 default:
752 return -ERANGE;
755 if (config.tx_type == HWTSTAMP_TX_OFF &&
756 bfin_mac_hwtstamp_is_none(config.rx_filter)) {
757 ptpctl &= ~PTP_EN;
758 bfin_write_EMAC_PTP_CTL(ptpctl);
760 SSYNC();
761 } else {
762 ptpctl |= PTP_EN;
763 bfin_write_EMAC_PTP_CTL(ptpctl);
766 * clear any existing timestamp
768 bfin_read_EMAC_PTP_RXSNAPLO();
769 bfin_read_EMAC_PTP_RXSNAPHI();
771 bfin_read_EMAC_PTP_TXSNAPLO();
772 bfin_read_EMAC_PTP_TXSNAPHI();
775 * Set registers so that rollover occurs soon to test this.
777 bfin_write_EMAC_PTP_TIMELO(0x00000000);
778 bfin_write_EMAC_PTP_TIMEHI(0xFF800000);
780 SSYNC();
782 lp->compare.last_update = 0;
783 timecounter_init(&lp->clock,
784 &lp->cycles,
785 ktime_to_ns(ktime_get_real()));
786 timecompare_update(&lp->compare, 0);
789 lp->stamp_cfg = config;
790 return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
791 -EFAULT : 0;
794 static void bfin_dump_hwtamp(char *s, ktime_t *hw, ktime_t *ts, struct timecompare *cmp)
796 ktime_t sys = ktime_get_real();
798 pr_debug("%s %s hardware:%d,%d transform system:%d,%d system:%d,%d, cmp:%lld, %lld\n",
799 __func__, s, hw->tv.sec, hw->tv.nsec, ts->tv.sec, ts->tv.nsec, sys.tv.sec,
800 sys.tv.nsec, cmp->offset, cmp->skew);
803 static void bfin_tx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
805 struct bfin_mac_local *lp = netdev_priv(netdev);
806 union skb_shared_tx *shtx = skb_tx(skb);
808 if (shtx->hardware) {
809 int timeout_cnt = MAX_TIMEOUT_CNT;
811 /* When doing time stamping, keep the connection to the socket
812 * a while longer
814 shtx->in_progress = 1;
817 * The timestamping is done at the EMAC module's MII/RMII interface
818 * when the module sees the Start of Frame of an event message packet. This
819 * interface is the closest possible place to the physical Ethernet transmission
820 * medium, providing the best timing accuracy.
822 while ((!(bfin_read_EMAC_PTP_ISTAT() & TXTL)) && (--timeout_cnt))
823 udelay(1);
824 if (timeout_cnt == 0)
825 printk(KERN_ERR DRV_NAME
826 ": fails to timestamp the TX packet\n");
827 else {
828 struct skb_shared_hwtstamps shhwtstamps;
829 u64 ns;
830 u64 regval;
832 regval = bfin_read_EMAC_PTP_TXSNAPLO();
833 regval |= (u64)bfin_read_EMAC_PTP_TXSNAPHI() << 32;
834 memset(&shhwtstamps, 0, sizeof(shhwtstamps));
835 ns = timecounter_cyc2time(&lp->clock,
836 regval);
837 timecompare_update(&lp->compare, ns);
838 shhwtstamps.hwtstamp = ns_to_ktime(ns);
839 shhwtstamps.syststamp =
840 timecompare_transform(&lp->compare, ns);
841 skb_tstamp_tx(skb, &shhwtstamps);
843 bfin_dump_hwtamp("TX", &shhwtstamps.hwtstamp, &shhwtstamps.syststamp, &lp->compare);
848 static void bfin_rx_hwtstamp(struct net_device *netdev, struct sk_buff *skb)
850 struct bfin_mac_local *lp = netdev_priv(netdev);
851 u32 valid;
852 u64 regval, ns;
853 struct skb_shared_hwtstamps *shhwtstamps;
855 if (bfin_mac_hwtstamp_is_none(lp->stamp_cfg.rx_filter))
856 return;
858 valid = bfin_read_EMAC_PTP_ISTAT() & RXEL;
859 if (!valid)
860 return;
862 shhwtstamps = skb_hwtstamps(skb);
864 regval = bfin_read_EMAC_PTP_RXSNAPLO();
865 regval |= (u64)bfin_read_EMAC_PTP_RXSNAPHI() << 32;
866 ns = timecounter_cyc2time(&lp->clock, regval);
867 timecompare_update(&lp->compare, ns);
868 memset(shhwtstamps, 0, sizeof(*shhwtstamps));
869 shhwtstamps->hwtstamp = ns_to_ktime(ns);
870 shhwtstamps->syststamp = timecompare_transform(&lp->compare, ns);
872 bfin_dump_hwtamp("RX", &shhwtstamps->hwtstamp, &shhwtstamps->syststamp, &lp->compare);
876 * bfin_read_clock - read raw cycle counter (to be used by time counter)
878 static cycle_t bfin_read_clock(const struct cyclecounter *tc)
880 u64 stamp;
882 stamp = bfin_read_EMAC_PTP_TIMELO();
883 stamp |= (u64)bfin_read_EMAC_PTP_TIMEHI() << 32ULL;
885 return stamp;
888 #define PTP_CLK 25000000
890 static void bfin_mac_hwtstamp_init(struct net_device *netdev)
892 struct bfin_mac_local *lp = netdev_priv(netdev);
893 u64 append;
895 /* Initialize hardware timer */
896 append = PTP_CLK * (1ULL << 32);
897 do_div(append, get_sclk());
898 bfin_write_EMAC_PTP_ADDEND((u32)append);
900 memset(&lp->cycles, 0, sizeof(lp->cycles));
901 lp->cycles.read = bfin_read_clock;
902 lp->cycles.mask = CLOCKSOURCE_MASK(64);
903 lp->cycles.mult = 1000000000 / PTP_CLK;
904 lp->cycles.shift = 0;
906 /* Synchronize our NIC clock against system wall clock */
907 memset(&lp->compare, 0, sizeof(lp->compare));
908 lp->compare.source = &lp->clock;
909 lp->compare.target = ktime_get_real;
910 lp->compare.num_samples = 10;
912 /* Initialize hwstamp config */
913 lp->stamp_cfg.rx_filter = HWTSTAMP_FILTER_NONE;
914 lp->stamp_cfg.tx_type = HWTSTAMP_TX_OFF;
917 #else
918 # define bfin_mac_hwtstamp_is_none(cfg) 0
919 # define bfin_mac_hwtstamp_init(dev)
920 # define bfin_mac_hwtstamp_ioctl(dev, ifr, cmd) (-EOPNOTSUPP)
921 # define bfin_rx_hwtstamp(dev, skb)
922 # define bfin_tx_hwtstamp(dev, skb)
923 #endif
925 static inline void _tx_reclaim_skb(void)
927 do {
928 tx_list_head->desc_a.config &= ~DMAEN;
929 tx_list_head->status.status_word = 0;
930 if (tx_list_head->skb) {
931 dev_kfree_skb(tx_list_head->skb);
932 tx_list_head->skb = NULL;
934 tx_list_head = tx_list_head->next;
936 } while (tx_list_head->status.status_word != 0);
939 static void tx_reclaim_skb(struct bfin_mac_local *lp)
941 int timeout_cnt = MAX_TIMEOUT_CNT;
943 if (tx_list_head->status.status_word != 0)
944 _tx_reclaim_skb();
946 if (current_tx_ptr->next == tx_list_head) {
947 while (tx_list_head->status.status_word == 0) {
948 /* slow down polling to avoid too many queue stop. */
949 udelay(10);
950 /* reclaim skb if DMA is not running. */
951 if (!(bfin_read_DMA2_IRQ_STATUS() & DMA_RUN))
952 break;
953 if (timeout_cnt-- < 0)
954 break;
957 if (timeout_cnt >= 0)
958 _tx_reclaim_skb();
959 else
960 netif_stop_queue(lp->ndev);
963 if (current_tx_ptr->next != tx_list_head &&
964 netif_queue_stopped(lp->ndev))
965 netif_wake_queue(lp->ndev);
967 if (tx_list_head != current_tx_ptr) {
968 /* shorten the timer interval if tx queue is stopped */
969 if (netif_queue_stopped(lp->ndev))
970 lp->tx_reclaim_timer.expires =
971 jiffies + (TX_RECLAIM_JIFFIES >> 4);
972 else
973 lp->tx_reclaim_timer.expires =
974 jiffies + TX_RECLAIM_JIFFIES;
976 mod_timer(&lp->tx_reclaim_timer,
977 lp->tx_reclaim_timer.expires);
980 return;
983 static void tx_reclaim_skb_timeout(unsigned long lp)
985 tx_reclaim_skb((struct bfin_mac_local *)lp);
988 static int bfin_mac_hard_start_xmit(struct sk_buff *skb,
989 struct net_device *dev)
991 struct bfin_mac_local *lp = netdev_priv(dev);
992 u16 *data;
993 u32 data_align = (unsigned long)(skb->data) & 0x3;
994 union skb_shared_tx *shtx = skb_tx(skb);
996 current_tx_ptr->skb = skb;
998 if (data_align == 0x2) {
999 /* move skb->data to current_tx_ptr payload */
1000 data = (u16 *)(skb->data) - 1;
1001 *data = (u16)(skb->len);
1003 * When transmitting an Ethernet packet, the PTP_TSYNC module requires
1004 * a DMA_Length_Word field associated with the packet. The lower 12 bits
1005 * of this field are the length of the packet payload in bytes and the higher
1006 * 4 bits are the timestamping enable field.
1008 if (shtx->hardware)
1009 *data |= 0x1000;
1011 current_tx_ptr->desc_a.start_addr = (u32)data;
1012 /* this is important! */
1013 blackfin_dcache_flush_range((u32)data,
1014 (u32)((u8 *)data + skb->len + 4));
1015 } else {
1016 *((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len);
1017 /* enable timestamping for the sent packet */
1018 if (shtx->hardware)
1019 *((u16 *)(current_tx_ptr->packet)) |= 0x1000;
1020 memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data,
1021 skb->len);
1022 current_tx_ptr->desc_a.start_addr =
1023 (u32)current_tx_ptr->packet;
1024 blackfin_dcache_flush_range(
1025 (u32)current_tx_ptr->packet,
1026 (u32)(current_tx_ptr->packet + skb->len + 2));
1029 /* make sure the internal data buffers in the core are drained
1030 * so that the DMA descriptors are completely written when the
1031 * DMA engine goes to fetch them below
1033 SSYNC();
1035 /* always clear status buffer before start tx dma */
1036 current_tx_ptr->status.status_word = 0;
1038 /* enable this packet's dma */
1039 current_tx_ptr->desc_a.config |= DMAEN;
1041 /* tx dma is running, just return */
1042 if (bfin_read_DMA2_IRQ_STATUS() & DMA_RUN)
1043 goto out;
1045 /* tx dma is not running */
1046 bfin_write_DMA2_NEXT_DESC_PTR(&(current_tx_ptr->desc_a));
1047 /* dma enabled, read from memory, size is 6 */
1048 bfin_write_DMA2_CONFIG(current_tx_ptr->desc_a.config);
1049 /* Turn on the EMAC tx */
1050 bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE);
1052 out:
1053 bfin_tx_hwtstamp(dev, skb);
1055 current_tx_ptr = current_tx_ptr->next;
1056 dev->stats.tx_packets++;
1057 dev->stats.tx_bytes += (skb->len);
1059 tx_reclaim_skb(lp);
1061 return NETDEV_TX_OK;
1064 #define IP_HEADER_OFF 0
1065 #define RX_ERROR_MASK (RX_LONG | RX_ALIGN | RX_CRC | RX_LEN | \
1066 RX_FRAG | RX_ADDR | RX_DMAO | RX_PHY | RX_LATE | RX_RANGE)
1068 static void bfin_mac_rx(struct net_device *dev)
1070 struct sk_buff *skb, *new_skb;
1071 unsigned short len;
1072 struct bfin_mac_local *lp __maybe_unused = netdev_priv(dev);
1073 #if defined(BFIN_MAC_CSUM_OFFLOAD)
1074 unsigned int i;
1075 unsigned char fcs[ETH_FCS_LEN + 1];
1076 #endif
1078 /* check if frame status word reports an error condition
1079 * we which case we simply drop the packet
1081 if (current_rx_ptr->status.status_word & RX_ERROR_MASK) {
1082 printk(KERN_NOTICE DRV_NAME
1083 ": rx: receive error - packet dropped\n");
1084 dev->stats.rx_dropped++;
1085 goto out;
1088 /* allocate a new skb for next time receive */
1089 skb = current_rx_ptr->skb;
1091 new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN);
1092 if (!new_skb) {
1093 printk(KERN_NOTICE DRV_NAME
1094 ": rx: low on mem - packet dropped\n");
1095 dev->stats.rx_dropped++;
1096 goto out;
1098 /* reserve 2 bytes for RXDWA padding */
1099 skb_reserve(new_skb, NET_IP_ALIGN);
1100 /* Invidate the data cache of skb->data range when it is write back
1101 * cache. It will prevent overwritting the new data from DMA
1103 blackfin_dcache_invalidate_range((unsigned long)new_skb->head,
1104 (unsigned long)new_skb->end);
1106 current_rx_ptr->skb = new_skb;
1107 current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2;
1109 len = (unsigned short)((current_rx_ptr->status.status_word) & RX_FRLEN);
1110 /* Deduce Ethernet FCS length from Ethernet payload length */
1111 len -= ETH_FCS_LEN;
1112 skb_put(skb, len);
1114 skb->protocol = eth_type_trans(skb, dev);
1116 bfin_rx_hwtstamp(dev, skb);
1118 #if defined(BFIN_MAC_CSUM_OFFLOAD)
1119 /* Checksum offloading only works for IPv4 packets with the standard IP header
1120 * length of 20 bytes, because the blackfin MAC checksum calculation is
1121 * based on that assumption. We must NOT use the calculated checksum if our
1122 * IP version or header break that assumption.
1124 if (skb->data[IP_HEADER_OFF] == 0x45) {
1125 skb->csum = current_rx_ptr->status.ip_payload_csum;
1127 * Deduce Ethernet FCS from hardware generated IP payload checksum.
1128 * IP checksum is based on 16-bit one's complement algorithm.
1129 * To deduce a value from checksum is equal to add its inversion.
1130 * If the IP payload len is odd, the inversed FCS should also
1131 * begin from odd address and leave first byte zero.
1133 if (skb->len % 2) {
1134 fcs[0] = 0;
1135 for (i = 0; i < ETH_FCS_LEN; i++)
1136 fcs[i + 1] = ~skb->data[skb->len + i];
1137 skb->csum = csum_partial(fcs, ETH_FCS_LEN + 1, skb->csum);
1138 } else {
1139 for (i = 0; i < ETH_FCS_LEN; i++)
1140 fcs[i] = ~skb->data[skb->len + i];
1141 skb->csum = csum_partial(fcs, ETH_FCS_LEN, skb->csum);
1143 skb->ip_summed = CHECKSUM_COMPLETE;
1145 #endif
1147 netif_rx(skb);
1148 dev->stats.rx_packets++;
1149 dev->stats.rx_bytes += len;
1150 out:
1151 current_rx_ptr->status.status_word = 0x00000000;
1152 current_rx_ptr = current_rx_ptr->next;
1155 /* interrupt routine to handle rx and error signal */
1156 static irqreturn_t bfin_mac_interrupt(int irq, void *dev_id)
1158 struct net_device *dev = dev_id;
1159 int number = 0;
1161 get_one_packet:
1162 if (current_rx_ptr->status.status_word == 0) {
1163 /* no more new packet received */
1164 if (number == 0) {
1165 if (current_rx_ptr->next->status.status_word != 0) {
1166 current_rx_ptr = current_rx_ptr->next;
1167 goto real_rx;
1170 bfin_write_DMA1_IRQ_STATUS(bfin_read_DMA1_IRQ_STATUS() |
1171 DMA_DONE | DMA_ERR);
1172 return IRQ_HANDLED;
1175 real_rx:
1176 bfin_mac_rx(dev);
1177 number++;
1178 goto get_one_packet;
1181 #ifdef CONFIG_NET_POLL_CONTROLLER
1182 static void bfin_mac_poll(struct net_device *dev)
1184 struct bfin_mac_local *lp = netdev_priv(dev);
1186 disable_irq(IRQ_MAC_RX);
1187 bfin_mac_interrupt(IRQ_MAC_RX, dev);
1188 tx_reclaim_skb(lp);
1189 enable_irq(IRQ_MAC_RX);
1191 #endif /* CONFIG_NET_POLL_CONTROLLER */
1193 static void bfin_mac_disable(void)
1195 unsigned int opmode;
1197 opmode = bfin_read_EMAC_OPMODE();
1198 opmode &= (~RE);
1199 opmode &= (~TE);
1200 /* Turn off the EMAC */
1201 bfin_write_EMAC_OPMODE(opmode);
1205 * Enable Interrupts, Receive, and Transmit
1207 static int bfin_mac_enable(void)
1209 int ret;
1210 u32 opmode;
1212 pr_debug("%s: %s\n", DRV_NAME, __func__);
1214 /* Set RX DMA */
1215 bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a));
1216 bfin_write_DMA1_CONFIG(rx_list_head->desc_a.config);
1218 /* Wait MII done */
1219 ret = bfin_mdio_poll();
1220 if (ret)
1221 return ret;
1223 /* We enable only RX here */
1224 /* ASTP : Enable Automatic Pad Stripping
1225 PR : Promiscuous Mode for test
1226 PSF : Receive frames with total length less than 64 bytes.
1227 FDMODE : Full Duplex Mode
1228 LB : Internal Loopback for test
1229 RE : Receiver Enable */
1230 opmode = bfin_read_EMAC_OPMODE();
1231 if (opmode & FDMODE)
1232 opmode |= PSF;
1233 else
1234 opmode |= DRO | DC | PSF;
1235 opmode |= RE;
1237 #if defined(CONFIG_BFIN_MAC_RMII)
1238 opmode |= RMII; /* For Now only 100MBit are supported */
1239 #if (defined(CONFIG_BF537) || defined(CONFIG_BF536)) && CONFIG_BF_REV_0_2
1240 opmode |= TE;
1241 #endif
1242 #endif
1243 /* Turn on the EMAC rx */
1244 bfin_write_EMAC_OPMODE(opmode);
1246 return 0;
1249 /* Our watchdog timed out. Called by the networking layer */
1250 static void bfin_mac_timeout(struct net_device *dev)
1252 struct bfin_mac_local *lp = netdev_priv(dev);
1254 pr_debug("%s: %s\n", dev->name, __func__);
1256 bfin_mac_disable();
1258 del_timer(&lp->tx_reclaim_timer);
1260 /* reset tx queue and free skb */
1261 while (tx_list_head != current_tx_ptr) {
1262 tx_list_head->desc_a.config &= ~DMAEN;
1263 tx_list_head->status.status_word = 0;
1264 if (tx_list_head->skb) {
1265 dev_kfree_skb(tx_list_head->skb);
1266 tx_list_head->skb = NULL;
1268 tx_list_head = tx_list_head->next;
1271 if (netif_queue_stopped(lp->ndev))
1272 netif_wake_queue(lp->ndev);
1274 bfin_mac_enable();
1276 /* We can accept TX packets again */
1277 dev->trans_start = jiffies; /* prevent tx timeout */
1278 netif_wake_queue(dev);
1281 static void bfin_mac_multicast_hash(struct net_device *dev)
1283 u32 emac_hashhi, emac_hashlo;
1284 struct netdev_hw_addr *ha;
1285 char *addrs;
1286 u32 crc;
1288 emac_hashhi = emac_hashlo = 0;
1290 netdev_for_each_mc_addr(ha, dev) {
1291 addrs = ha->addr;
1293 /* skip non-multicast addresses */
1294 if (!(*addrs & 1))
1295 continue;
1297 crc = ether_crc(ETH_ALEN, addrs);
1298 crc >>= 26;
1300 if (crc & 0x20)
1301 emac_hashhi |= 1 << (crc & 0x1f);
1302 else
1303 emac_hashlo |= 1 << (crc & 0x1f);
1306 bfin_write_EMAC_HASHHI(emac_hashhi);
1307 bfin_write_EMAC_HASHLO(emac_hashlo);
1311 * This routine will, depending on the values passed to it,
1312 * either make it accept multicast packets, go into
1313 * promiscuous mode (for TCPDUMP and cousins) or accept
1314 * a select set of multicast packets
1316 static void bfin_mac_set_multicast_list(struct net_device *dev)
1318 u32 sysctl;
1320 if (dev->flags & IFF_PROMISC) {
1321 printk(KERN_INFO "%s: set to promisc mode\n", dev->name);
1322 sysctl = bfin_read_EMAC_OPMODE();
1323 sysctl |= PR;
1324 bfin_write_EMAC_OPMODE(sysctl);
1325 } else if (dev->flags & IFF_ALLMULTI) {
1326 /* accept all multicast */
1327 sysctl = bfin_read_EMAC_OPMODE();
1328 sysctl |= PAM;
1329 bfin_write_EMAC_OPMODE(sysctl);
1330 } else if (!netdev_mc_empty(dev)) {
1331 /* set up multicast hash table */
1332 sysctl = bfin_read_EMAC_OPMODE();
1333 sysctl |= HM;
1334 bfin_write_EMAC_OPMODE(sysctl);
1335 bfin_mac_multicast_hash(dev);
1336 } else {
1337 /* clear promisc or multicast mode */
1338 sysctl = bfin_read_EMAC_OPMODE();
1339 sysctl &= ~(RAF | PAM);
1340 bfin_write_EMAC_OPMODE(sysctl);
1344 static int bfin_mac_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
1346 switch (cmd) {
1347 case SIOCSHWTSTAMP:
1348 return bfin_mac_hwtstamp_ioctl(netdev, ifr, cmd);
1349 default:
1350 return -EOPNOTSUPP;
1355 * this puts the device in an inactive state
1357 static void bfin_mac_shutdown(struct net_device *dev)
1359 /* Turn off the EMAC */
1360 bfin_write_EMAC_OPMODE(0x00000000);
1361 /* Turn off the EMAC RX DMA */
1362 bfin_write_DMA1_CONFIG(0x0000);
1363 bfin_write_DMA2_CONFIG(0x0000);
1367 * Open and Initialize the interface
1369 * Set up everything, reset the card, etc..
1371 static int bfin_mac_open(struct net_device *dev)
1373 struct bfin_mac_local *lp = netdev_priv(dev);
1374 int ret;
1375 pr_debug("%s: %s\n", dev->name, __func__);
1378 * Check that the address is valid. If its not, refuse
1379 * to bring the device up. The user must specify an
1380 * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx
1382 if (!is_valid_ether_addr(dev->dev_addr)) {
1383 printk(KERN_WARNING DRV_NAME ": no valid ethernet hw addr\n");
1384 return -EINVAL;
1387 /* initial rx and tx list */
1388 ret = desc_list_init();
1389 if (ret)
1390 return ret;
1392 phy_start(lp->phydev);
1393 phy_write(lp->phydev, MII_BMCR, BMCR_RESET);
1394 setup_system_regs(dev);
1395 setup_mac_addr(dev->dev_addr);
1397 bfin_mac_disable();
1398 ret = bfin_mac_enable();
1399 if (ret)
1400 return ret;
1401 pr_debug("hardware init finished\n");
1403 netif_start_queue(dev);
1404 netif_carrier_on(dev);
1406 return 0;
1410 * this makes the board clean up everything that it can
1411 * and not talk to the outside world. Caused by
1412 * an 'ifconfig ethX down'
1414 static int bfin_mac_close(struct net_device *dev)
1416 struct bfin_mac_local *lp = netdev_priv(dev);
1417 pr_debug("%s: %s\n", dev->name, __func__);
1419 netif_stop_queue(dev);
1420 netif_carrier_off(dev);
1422 phy_stop(lp->phydev);
1423 phy_write(lp->phydev, MII_BMCR, BMCR_PDOWN);
1425 /* clear everything */
1426 bfin_mac_shutdown(dev);
1428 /* free the rx/tx buffers */
1429 desc_list_free();
1431 return 0;
1434 static const struct net_device_ops bfin_mac_netdev_ops = {
1435 .ndo_open = bfin_mac_open,
1436 .ndo_stop = bfin_mac_close,
1437 .ndo_start_xmit = bfin_mac_hard_start_xmit,
1438 .ndo_set_mac_address = bfin_mac_set_mac_address,
1439 .ndo_tx_timeout = bfin_mac_timeout,
1440 .ndo_set_multicast_list = bfin_mac_set_multicast_list,
1441 .ndo_do_ioctl = bfin_mac_ioctl,
1442 .ndo_validate_addr = eth_validate_addr,
1443 .ndo_change_mtu = eth_change_mtu,
1444 #ifdef CONFIG_NET_POLL_CONTROLLER
1445 .ndo_poll_controller = bfin_mac_poll,
1446 #endif
1449 static int __devinit bfin_mac_probe(struct platform_device *pdev)
1451 struct net_device *ndev;
1452 struct bfin_mac_local *lp;
1453 struct platform_device *pd;
1454 int rc;
1456 ndev = alloc_etherdev(sizeof(struct bfin_mac_local));
1457 if (!ndev) {
1458 dev_err(&pdev->dev, "Cannot allocate net device!\n");
1459 return -ENOMEM;
1462 SET_NETDEV_DEV(ndev, &pdev->dev);
1463 platform_set_drvdata(pdev, ndev);
1464 lp = netdev_priv(ndev);
1465 lp->ndev = ndev;
1467 /* Grab the MAC address in the MAC */
1468 *(__le32 *) (&(ndev->dev_addr[0])) = cpu_to_le32(bfin_read_EMAC_ADDRLO());
1469 *(__le16 *) (&(ndev->dev_addr[4])) = cpu_to_le16((u16) bfin_read_EMAC_ADDRHI());
1471 /* probe mac */
1472 /*todo: how to proble? which is revision_register */
1473 bfin_write_EMAC_ADDRLO(0x12345678);
1474 if (bfin_read_EMAC_ADDRLO() != 0x12345678) {
1475 dev_err(&pdev->dev, "Cannot detect Blackfin on-chip ethernet MAC controller!\n");
1476 rc = -ENODEV;
1477 goto out_err_probe_mac;
1482 * Is it valid? (Did bootloader initialize it?)
1483 * Grab the MAC from the board somehow
1484 * this is done in the arch/blackfin/mach-bfxxx/boards/eth_mac.c
1486 if (!is_valid_ether_addr(ndev->dev_addr))
1487 bfin_get_ether_addr(ndev->dev_addr);
1489 /* If still not valid, get a random one */
1490 if (!is_valid_ether_addr(ndev->dev_addr))
1491 random_ether_addr(ndev->dev_addr);
1493 setup_mac_addr(ndev->dev_addr);
1495 if (!pdev->dev.platform_data) {
1496 dev_err(&pdev->dev, "Cannot get platform device bfin_mii_bus!\n");
1497 rc = -ENODEV;
1498 goto out_err_probe_mac;
1500 pd = pdev->dev.platform_data;
1501 lp->mii_bus = platform_get_drvdata(pd);
1502 if (!lp->mii_bus) {
1503 dev_err(&pdev->dev, "Cannot get mii_bus!\n");
1504 rc = -ENODEV;
1505 goto out_err_mii_bus_probe;
1507 lp->mii_bus->priv = ndev;
1509 rc = mii_probe(ndev);
1510 if (rc) {
1511 dev_err(&pdev->dev, "MII Probe failed!\n");
1512 goto out_err_mii_probe;
1515 /* Fill in the fields of the device structure with ethernet values. */
1516 ether_setup(ndev);
1518 ndev->netdev_ops = &bfin_mac_netdev_ops;
1519 ndev->ethtool_ops = &bfin_mac_ethtool_ops;
1521 init_timer(&lp->tx_reclaim_timer);
1522 lp->tx_reclaim_timer.data = (unsigned long)lp;
1523 lp->tx_reclaim_timer.function = tx_reclaim_skb_timeout;
1525 spin_lock_init(&lp->lock);
1527 /* now, enable interrupts */
1528 /* register irq handler */
1529 rc = request_irq(IRQ_MAC_RX, bfin_mac_interrupt,
1530 IRQF_DISABLED, "EMAC_RX", ndev);
1531 if (rc) {
1532 dev_err(&pdev->dev, "Cannot request Blackfin MAC RX IRQ!\n");
1533 rc = -EBUSY;
1534 goto out_err_request_irq;
1537 rc = register_netdev(ndev);
1538 if (rc) {
1539 dev_err(&pdev->dev, "Cannot register net device!\n");
1540 goto out_err_reg_ndev;
1543 bfin_mac_hwtstamp_init(ndev);
1545 /* now, print out the card info, in a short format.. */
1546 dev_info(&pdev->dev, "%s, Version %s\n", DRV_DESC, DRV_VERSION);
1548 return 0;
1550 out_err_reg_ndev:
1551 free_irq(IRQ_MAC_RX, ndev);
1552 out_err_request_irq:
1553 out_err_mii_probe:
1554 mdiobus_unregister(lp->mii_bus);
1555 mdiobus_free(lp->mii_bus);
1556 out_err_mii_bus_probe:
1557 peripheral_free_list(pin_req);
1558 out_err_probe_mac:
1559 platform_set_drvdata(pdev, NULL);
1560 free_netdev(ndev);
1562 return rc;
1565 static int __devexit bfin_mac_remove(struct platform_device *pdev)
1567 struct net_device *ndev = platform_get_drvdata(pdev);
1568 struct bfin_mac_local *lp = netdev_priv(ndev);
1570 platform_set_drvdata(pdev, NULL);
1572 lp->mii_bus->priv = NULL;
1574 unregister_netdev(ndev);
1576 free_irq(IRQ_MAC_RX, ndev);
1578 free_netdev(ndev);
1580 peripheral_free_list(pin_req);
1582 return 0;
1585 #ifdef CONFIG_PM
1586 static int bfin_mac_suspend(struct platform_device *pdev, pm_message_t mesg)
1588 struct net_device *net_dev = platform_get_drvdata(pdev);
1589 struct bfin_mac_local *lp = netdev_priv(net_dev);
1591 if (lp->wol) {
1592 bfin_write_EMAC_OPMODE((bfin_read_EMAC_OPMODE() & ~TE) | RE);
1593 bfin_write_EMAC_WKUP_CTL(MPKE);
1594 enable_irq_wake(IRQ_MAC_WAKEDET);
1595 } else {
1596 if (netif_running(net_dev))
1597 bfin_mac_close(net_dev);
1600 return 0;
1603 static int bfin_mac_resume(struct platform_device *pdev)
1605 struct net_device *net_dev = platform_get_drvdata(pdev);
1606 struct bfin_mac_local *lp = netdev_priv(net_dev);
1608 if (lp->wol) {
1609 bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE);
1610 bfin_write_EMAC_WKUP_CTL(0);
1611 disable_irq_wake(IRQ_MAC_WAKEDET);
1612 } else {
1613 if (netif_running(net_dev))
1614 bfin_mac_open(net_dev);
1617 return 0;
1619 #else
1620 #define bfin_mac_suspend NULL
1621 #define bfin_mac_resume NULL
1622 #endif /* CONFIG_PM */
1624 static int __devinit bfin_mii_bus_probe(struct platform_device *pdev)
1626 struct mii_bus *miibus;
1627 int rc, i;
1630 * We are setting up a network card,
1631 * so set the GPIO pins to Ethernet mode
1633 rc = peripheral_request_list(pin_req, DRV_NAME);
1634 if (rc) {
1635 dev_err(&pdev->dev, "Requesting peripherals failed!\n");
1636 return rc;
1639 rc = -ENOMEM;
1640 miibus = mdiobus_alloc();
1641 if (miibus == NULL)
1642 goto out_err_alloc;
1643 miibus->read = bfin_mdiobus_read;
1644 miibus->write = bfin_mdiobus_write;
1645 miibus->reset = bfin_mdiobus_reset;
1647 miibus->parent = &pdev->dev;
1648 miibus->name = "bfin_mii_bus";
1649 snprintf(miibus->id, MII_BUS_ID_SIZE, "0");
1650 miibus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
1651 if (miibus->irq == NULL)
1652 goto out_err_alloc;
1653 for (i = 0; i < PHY_MAX_ADDR; ++i)
1654 miibus->irq[i] = PHY_POLL;
1656 rc = mdiobus_register(miibus);
1657 if (rc) {
1658 dev_err(&pdev->dev, "Cannot register MDIO bus!\n");
1659 goto out_err_mdiobus_register;
1662 platform_set_drvdata(pdev, miibus);
1663 return 0;
1665 out_err_mdiobus_register:
1666 kfree(miibus->irq);
1667 mdiobus_free(miibus);
1668 out_err_alloc:
1669 peripheral_free_list(pin_req);
1671 return rc;
1674 static int __devexit bfin_mii_bus_remove(struct platform_device *pdev)
1676 struct mii_bus *miibus = platform_get_drvdata(pdev);
1677 platform_set_drvdata(pdev, NULL);
1678 mdiobus_unregister(miibus);
1679 kfree(miibus->irq);
1680 mdiobus_free(miibus);
1681 peripheral_free_list(pin_req);
1682 return 0;
1685 static struct platform_driver bfin_mii_bus_driver = {
1686 .probe = bfin_mii_bus_probe,
1687 .remove = __devexit_p(bfin_mii_bus_remove),
1688 .driver = {
1689 .name = "bfin_mii_bus",
1690 .owner = THIS_MODULE,
1694 static struct platform_driver bfin_mac_driver = {
1695 .probe = bfin_mac_probe,
1696 .remove = __devexit_p(bfin_mac_remove),
1697 .resume = bfin_mac_resume,
1698 .suspend = bfin_mac_suspend,
1699 .driver = {
1700 .name = DRV_NAME,
1701 .owner = THIS_MODULE,
1705 static int __init bfin_mac_init(void)
1707 int ret;
1708 ret = platform_driver_register(&bfin_mii_bus_driver);
1709 if (!ret)
1710 return platform_driver_register(&bfin_mac_driver);
1711 return -ENODEV;
1714 module_init(bfin_mac_init);
1716 static void __exit bfin_mac_cleanup(void)
1718 platform_driver_unregister(&bfin_mac_driver);
1719 platform_driver_unregister(&bfin_mii_bus_driver);
1722 module_exit(bfin_mac_cleanup);