GUI: Fix Tomato RAF theme for all builds. Compilation typo.
[tomato.git] / release / src-rt-6.x.4708 / linux / linux-2.6.36 / drivers / net / arcnet / arc-rawmode.c
blob8dce651b05d48aec635d58aab7d5884e68aeeec8
1 /*
2 * Linux ARCnet driver - "raw mode" packet encapsulation (no soft headers)
3 *
4 * Written 1994-1999 by Avery Pennarun.
5 * Derived from skeleton.c by Donald Becker.
7 * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
8 * for sponsoring the further development of this driver.
10 * **********************
12 * The original copyright of skeleton.c was as follows:
14 * skeleton.c Written 1993 by Donald Becker.
15 * Copyright 1993 United States Government as represented by the
16 * Director, National Security Agency. This software may only be used
17 * and distributed according to the terms of the GNU General Public License as
18 * modified by SRC, incorporated herein by reference.
20 * **********************
22 * For more details, see drivers/net/arcnet.c
24 * **********************
27 #include <linux/module.h>
28 #include <linux/gfp.h>
29 #include <linux/init.h>
30 #include <linux/if_arp.h>
31 #include <net/arp.h>
32 #include <linux/netdevice.h>
33 #include <linux/skbuff.h>
34 #include <linux/arcdevice.h>
36 #define VERSION "arcnet: raw mode (`r') encapsulation support loaded.\n"
39 static void rx(struct net_device *dev, int bufnum,
40 struct archdr *pkthdr, int length);
41 static int build_header(struct sk_buff *skb, struct net_device *dev,
42 unsigned short type, uint8_t daddr);
43 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
44 int bufnum);
46 static struct ArcProto rawmode_proto =
48 .suffix = 'r',
49 .mtu = XMTU,
50 .rx = rx,
51 .build_header = build_header,
52 .prepare_tx = prepare_tx,
53 .continue_tx = NULL,
54 .ack_tx = NULL
58 static int __init arcnet_raw_init(void)
60 int count;
62 printk(VERSION);
64 for (count = 0; count < 256; count++)
65 if (arc_proto_map[count] == arc_proto_default)
66 arc_proto_map[count] = &rawmode_proto;
68 /* for raw mode, we only set the bcast proto if there's no better one */
69 if (arc_bcast_proto == arc_proto_default)
70 arc_bcast_proto = &rawmode_proto;
72 arc_proto_default = &rawmode_proto;
73 return 0;
76 static void __exit arcnet_raw_exit(void)
78 arcnet_unregister_proto(&rawmode_proto);
81 module_init(arcnet_raw_init);
82 module_exit(arcnet_raw_exit);
84 MODULE_LICENSE("GPL");
87 /* packet receiver */
88 static void rx(struct net_device *dev, int bufnum,
89 struct archdr *pkthdr, int length)
91 struct arcnet_local *lp = netdev_priv(dev);
92 struct sk_buff *skb;
93 struct archdr *pkt = pkthdr;
94 int ofs;
96 BUGMSG(D_DURING, "it's a raw packet (length=%d)\n", length);
98 if (length > MTU)
99 ofs = 512 - length;
100 else
101 ofs = 256 - length;
103 skb = alloc_skb(length + ARC_HDR_SIZE, GFP_ATOMIC);
104 if (skb == NULL) {
105 BUGMSG(D_NORMAL, "Memory squeeze, dropping packet.\n");
106 dev->stats.rx_dropped++;
107 return;
109 skb_put(skb, length + ARC_HDR_SIZE);
110 skb->dev = dev;
112 pkt = (struct archdr *) skb->data;
114 skb_reset_mac_header(skb);
115 skb_pull(skb, ARC_HDR_SIZE);
117 /* up to sizeof(pkt->soft) has already been copied from the card */
118 memcpy(pkt, pkthdr, sizeof(struct archdr));
119 if (length > sizeof(pkt->soft))
120 lp->hw.copy_from_card(dev, bufnum, ofs + sizeof(pkt->soft),
121 pkt->soft.raw + sizeof(pkt->soft),
122 length - sizeof(pkt->soft));
124 BUGLVL(D_SKB) arcnet_dump_skb(dev, skb, "rx");
126 skb->protocol = cpu_to_be16(ETH_P_ARCNET);
127 netif_rx(skb);
132 * Create the ARCnet hard/soft headers for raw mode.
133 * There aren't any soft headers in raw mode - not even the protocol id.
135 static int build_header(struct sk_buff *skb, struct net_device *dev,
136 unsigned short type, uint8_t daddr)
138 int hdr_size = ARC_HDR_SIZE;
139 struct archdr *pkt = (struct archdr *) skb_push(skb, hdr_size);
142 * Set the source hardware address.
144 * This is pretty pointless for most purposes, but it can help in
145 * debugging. ARCnet does not allow us to change the source address in
146 * the actual packet sent)
148 pkt->hard.source = *dev->dev_addr;
150 /* see linux/net/ethernet/eth.c to see where I got the following */
152 if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) {
153 pkt->hard.dest = 0;
154 return hdr_size;
156 /* otherwise, just fill it in and go! */
157 pkt->hard.dest = daddr;
159 return hdr_size; /* success */
163 static int prepare_tx(struct net_device *dev, struct archdr *pkt, int length,
164 int bufnum)
166 struct arcnet_local *lp = netdev_priv(dev);
167 struct arc_hardware *hard = &pkt->hard;
168 int ofs;
170 BUGMSG(D_DURING, "prepare_tx: txbufs=%d/%d/%d\n",
171 lp->next_tx, lp->cur_tx, bufnum);
173 length -= ARC_HDR_SIZE; /* hard header is not included in packet length */
175 if (length > XMTU) {
176 /* should never happen! other people already check for this. */
177 BUGMSG(D_NORMAL, "Bug! prepare_tx with size %d (> %d)\n",
178 length, XMTU);
179 length = XMTU;
181 if (length >= MinTU) {
182 hard->offset[0] = 0;
183 hard->offset[1] = ofs = 512 - length;
184 } else if (length > MTU) {
185 hard->offset[0] = 0;
186 hard->offset[1] = ofs = 512 - length - 3;
187 } else
188 hard->offset[0] = ofs = 256 - length;
190 BUGMSG(D_DURING, "prepare_tx: length=%d ofs=%d\n",
191 length,ofs);
193 lp->hw.copy_to_card(dev, bufnum, 0, hard, ARC_HDR_SIZE);
194 lp->hw.copy_to_card(dev, bufnum, ofs, &pkt->soft, length);
196 lp->lastload_dest = hard->dest;
198 return 1; /* done */