?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
GUI: Fix Tomato RAF theme for all builds. Compilation typo.
[tomato.git] / release / src-rt-6.x.4708 / linux / linux-2.6.36 / drivers / media / video / bt8xx / bttv-cards.c
blob9360ce0ebfa2605f0cebff28848b92236909600b
1 /*
2
3 bttv-cards.c
4
5 this file has configuration informations - card-specific stuff
6 like the big tvcards array for the most part
7
8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
9 & Marcus Metzler (mocm@thp.uni-koeln.de)
10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
11
12 This program is free software; you can redistribute it and/or modify
13 it under the terms of the GNU General Public License as published by
14 the Free Software Foundation; either version 2 of the License, or
15 (at your option) any later version.
16
17 This program is distributed in the hope that it will be useful,
18 but WITHOUT ANY WARRANTY; without even the implied warranty of
19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 GNU General Public License for more details.
21
22 You should have received a copy of the GNU General Public License
23 along with this program; if not, write to the Free Software
24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25
26 */
27
28 #include <linux/delay.h>
29 #include <linux/module.h>
30 #include <linux/kmod.h>
31 #include <linux/init.h>
32 #include <linux/pci.h>
33 #include <linux/vmalloc.h>
34 #include <linux/firmware.h>
35 #include <net/checksum.h>
36
37 #include <asm/unaligned.h>
38 #include <asm/io.h>
39
40 #include "bttvp.h"
41 #include <media/v4l2-common.h>
42 #include <media/tvaudio.h>
43 #include "bttv-audio-hook.h"
44
45 /* fwd decl */
46 static void boot_msp34xx(struct bttv *btv, int pin);
47 static void hauppauge_eeprom(struct bttv *btv);
48 static void avermedia_eeprom(struct bttv *btv);
49 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
50 static void modtec_eeprom(struct bttv *btv);
51 static void init_PXC200(struct bttv *btv);
52 static void init_RTV24(struct bttv *btv);
53
54 static void rv605_muxsel(struct bttv *btv, unsigned int input);
55 static void eagle_muxsel(struct bttv *btv, unsigned int input);
56 static void xguard_muxsel(struct bttv *btv, unsigned int input);
57 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
58 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
59
60 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
61
62 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
63 static void picolo_tetra_init(struct bttv *btv);
64
65 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
66 static void tibetCS16_init(struct bttv *btv);
67
68 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
69 static void kodicom4400r_init(struct bttv *btv);
70
71 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
72 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
73
74 static void geovision_muxsel(struct bttv *btv, unsigned int input);
75
76 static void phytec_muxsel(struct bttv *btv, unsigned int input);
77
78 static void gv800s_muxsel(struct bttv *btv, unsigned int input);
79 static void gv800s_init(struct bttv *btv);
80
81 static int terratec_active_radio_upgrade(struct bttv *btv);
82 static int tea5757_read(struct bttv *btv);
83 static int tea5757_write(struct bttv *btv, int value);
84 static void identify_by_eeprom(struct bttv *btv,
85 unsigned char eeprom_data[256]);
86 static int __devinit pvr_boot(struct bttv *btv);
87
88 /* config variables */
89 static unsigned int triton1;
90 static unsigned int vsfx;
91 static unsigned int latency = UNSET;
92 int no_overlay=-1;
93
94 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
95 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
96 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
97 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
98 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
99 static unsigned int audiodev[BTTV_MAX];
100 static unsigned int saa6588[BTTV_MAX];
101 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
102 static unsigned int autoload = UNSET;
103 static unsigned int gpiomask = UNSET;
104 static unsigned int audioall = UNSET;
105 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
106
107 /* insmod options */
108 module_param(triton1, int, 0444);
109 module_param(vsfx, int, 0444);
110 module_param(no_overlay, int, 0444);
111 module_param(latency, int, 0444);
112 module_param(gpiomask, int, 0444);
113 module_param(audioall, int, 0444);
114 module_param(autoload, int, 0444);
115
116 module_param_array(card, int, NULL, 0444);
117 module_param_array(pll, int, NULL, 0444);
118 module_param_array(tuner, int, NULL, 0444);
119 module_param_array(svhs, int, NULL, 0444);
120 module_param_array(remote, int, NULL, 0444);
121 module_param_array(audiodev, int, NULL, 0444);
122 module_param_array(audiomux, int, NULL, 0444);
123
124 MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
125 "[enable bug compatibility for triton1 + others]");
126 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
127 "[yet another chipset flaw workaround]");
128 MODULE_PARM_DESC(latency,"pci latency timer");
129 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
130 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
131 MODULE_PARM_DESC(tuner,"specify installed tuner type");
132 MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
133 MODULE_PARM_DESC(audiodev, "specify audio device:\n"
134 "\t\t-1 = no audio\n"
135 "\t\t 0 = autodetect (default)\n"
136 "\t\t 1 = msp3400\n"
137 "\t\t 2 = tda7432\n"
138 "\t\t 3 = tvaudio");
139 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
140 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
141 " [some VIA/SIS chipsets are known to have problem with overlay]");
142
143 /* ----------------------------------------------------------------------- */
144 /* list of card IDs for bt878+ cards */
145
146 static struct CARD {
147 unsigned id;
148 int cardnr;
149 char *name;
150 } cards[] __devinitdata = {
151 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
152 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
153 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
154 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
155 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
156 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
157 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
158 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
159 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
160
161 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
162 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
163
164 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
165 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
166 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
167 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
168 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
169 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
170 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
171 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
172 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
173
174 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
175 /* some cards ship with byteswapped IDs ... */
176 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
177 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
178 /* this seems to happen as well ... */
179 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
180
181 { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" },
182 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" },
183 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
184
185 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
186 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
187 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
188 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
189 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
190 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
191 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
192
193 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
194 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
195 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
196 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
197 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
198
199 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
200 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
201 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
202 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
203
204 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
205 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
206 /* clashes with FlyVideo
207 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
208 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
209 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
210 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
211 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
212
213 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
214 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
215 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
216 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
217 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
218
219 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
220 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
221 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
222 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
223 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
224
225 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
226 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
227 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
228 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
229
230 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
231 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
232 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
233 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
234
235 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
236 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
237 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
238 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
239 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
240 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
241 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
242 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
243 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
244 { 0xa1550800, BTTV_BOARD_IVC200, "IVC-200" },
245 { 0xa1550801, BTTV_BOARD_IVC200, "IVC-200" },
246 { 0xa1550802, BTTV_BOARD_IVC200, "IVC-200" },
247 { 0xa1550803, BTTV_BOARD_IVC200, "IVC-200" },
248 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
249 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
250 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
251 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
252 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
253 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
254 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
255 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
256 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
257 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
258 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
259 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
260 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
261 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
262 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
263 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
264 { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" },
265 { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" },
266 { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" },
267 { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" },
268
269 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
270 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
271
272 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
273 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
274 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
275 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
276 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
277 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
278
279 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
280 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
281
282 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
283 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
284 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
285 { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" },
286 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
287 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
288 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
289 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
290 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
291
292 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
293 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
294
295 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
296 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
297 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
298 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
299
300 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
301
302 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
303 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
304
305 /* likely broken, vendor id doesn't match the other magic views ...
306 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
307
308 /* Duplicate PCI ID, reconfigure for this board during the eeprom read.
309 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
310
311 { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"},
312
313 /* DVB cards (using pci function .1 for mpeg data xfer) */
314 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
315 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
316 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
317 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
318 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
319 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
320 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
321 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
322 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
323 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" },
324 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
325 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
326 { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" },
327 { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" },
328 { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" },
329 { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
330 { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
331 { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
332 { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
333
334 { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" },
335 { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" },
336 { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" },
337 { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" },
338 { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" },
339 { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" },
340 { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" },
341 { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" },
342
343 { 0, -1, NULL }
344 };
345
346 /* ----------------------------------------------------------------------- */
347 /* array with description for bt848 / bt878 tv/grabber cards */
348
349 struct tvcard bttv_tvcards[] = {
350 /* ---- card 0x00 ---------------------------------- */
351 [BTTV_BOARD_UNKNOWN] = {
352 .name = " *** UNKNOWN/GENERIC *** ",
353 .video_inputs = 4,
354 .svhs = 2,
355 .muxsel = MUXSEL(2, 3, 1, 0),
356 .tuner_type = UNSET,
357 .tuner_addr = ADDR_UNSET,
358 },
359 [BTTV_BOARD_MIRO] = {
360 .name = "MIRO PCTV",
361 .video_inputs = 4,
362 /* .audio_inputs= 1, */
363 .svhs = 2,
364 .gpiomask = 15,
365 .muxsel = MUXSEL(2, 3, 1, 1),
366 .gpiomux = { 2, 0, 0, 0 },
367 .gpiomute = 10,
368 .needs_tvaudio = 1,
369 .tuner_type = UNSET,
370 .tuner_addr = ADDR_UNSET,
371 },
372 [BTTV_BOARD_HAUPPAUGE] = {
373 .name = "Hauppauge (bt848)",
374 .video_inputs = 4,
375 /* .audio_inputs= 1, */
376 .svhs = 2,
377 .gpiomask = 7,
378 .muxsel = MUXSEL(2, 3, 1, 1),
379 .gpiomux = { 0, 1, 2, 3 },
380 .gpiomute = 4,
381 .needs_tvaudio = 1,
382 .tuner_type = UNSET,
383 .tuner_addr = ADDR_UNSET,
384 },
385 [BTTV_BOARD_STB] = {
386 .name = "STB, Gateway P/N 6000699 (bt848)",
387 .video_inputs = 3,
388 /* .audio_inputs= 1, */
389 .svhs = 2,
390 .gpiomask = 7,
391 .muxsel = MUXSEL(2, 3, 1, 1),
392 .gpiomux = { 4, 0, 2, 3 },
393 .gpiomute = 1,
394 .no_msp34xx = 1,
395 .needs_tvaudio = 1,
396 .tuner_type = TUNER_PHILIPS_NTSC,
397 .tuner_addr = ADDR_UNSET,
398 .pll = PLL_28,
399 .has_radio = 1,
400 },
401
402 /* ---- card 0x04 ---------------------------------- */
403 [BTTV_BOARD_INTEL] = {
404 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
405 .video_inputs = 4,
406 /* .audio_inputs= 0, */
407 .svhs = 2,
408 .gpiomask = 0,
409 .muxsel = MUXSEL(2, 3, 1, 1),
410 .gpiomux = { 0 },
411 .needs_tvaudio = 0,
412 .tuner_type = TUNER_ABSENT,
413 .tuner_addr = ADDR_UNSET,
414 },
415 [BTTV_BOARD_DIAMOND] = {
416 .name = "Diamond DTV2000",
417 .video_inputs = 4,
418 /* .audio_inputs= 1, */
419 .svhs = 2,
420 .gpiomask = 3,
421 .muxsel = MUXSEL(2, 3, 1, 0),
422 .gpiomux = { 0, 1, 0, 1 },
423 .gpiomute = 3,
424 .needs_tvaudio = 1,
425 .tuner_type = UNSET,
426 .tuner_addr = ADDR_UNSET,
427 },
428 [BTTV_BOARD_AVERMEDIA] = {
429 .name = "AVerMedia TVPhone",
430 .video_inputs = 3,
431 /* .audio_inputs= 1, */
432 .svhs = 3,
433 .muxsel = MUXSEL(2, 3, 1, 1),
434 .gpiomask = 0x0f,
435 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
436 /* 0x04 for some cards ?? */
437 .needs_tvaudio = 1,
438 .tuner_type = UNSET,
439 .tuner_addr = ADDR_UNSET,
440 .audio_mode_gpio= avermedia_tvphone_audio,
441 .has_remote = 1,
442 },
443 [BTTV_BOARD_MATRIX_VISION] = {
444 .name = "MATRIX-Vision MV-Delta",
445 .video_inputs = 5,
446 /* .audio_inputs= 1, */
447 .svhs = 3,
448 .gpiomask = 0,
449 .muxsel = MUXSEL(2, 3, 1, 0, 0),
450 .gpiomux = { 0 },
451 .needs_tvaudio = 1,
452 .tuner_type = TUNER_ABSENT,
453 .tuner_addr = ADDR_UNSET,
454 },
455
456 /* ---- card 0x08 ---------------------------------- */
457 [BTTV_BOARD_FLYVIDEO] = {
458 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
459 .video_inputs = 4,
460 /* .audio_inputs= 1, */
461 .svhs = 2,
462 .gpiomask = 0xc00,
463 .muxsel = MUXSEL(2, 3, 1, 1),
464 .gpiomux = { 0, 0xc00, 0x800, 0x400 },
465 .gpiomute = 0xc00,
466 .needs_tvaudio = 1,
467 .pll = PLL_28,
468 .tuner_type = UNSET,
469 .tuner_addr = ADDR_UNSET,
470 },
471 [BTTV_BOARD_TURBOTV] = {
472 .name = "IMS/IXmicro TurboTV",
473 .video_inputs = 3,
474 /* .audio_inputs= 1, */
475 .svhs = 2,
476 .gpiomask = 3,
477 .muxsel = MUXSEL(2, 3, 1, 1),
478 .gpiomux = { 1, 1, 2, 3 },
479 .needs_tvaudio = 0,
480 .pll = PLL_28,
481 .tuner_type = TUNER_TEMIC_PAL,
482 .tuner_addr = ADDR_UNSET,
483 },
484 [BTTV_BOARD_HAUPPAUGE878] = {
485 .name = "Hauppauge (bt878)",
486 .video_inputs = 4,
487 /* .audio_inputs= 1, */
488 .svhs = 2,
489 .gpiomask = 0x0f, /* old: 7 */
490 .muxsel = MUXSEL(2, 0, 1, 1),
491 .gpiomux = { 0, 1, 2, 3 },
492 .gpiomute = 4,
493 .needs_tvaudio = 1,
494 .pll = PLL_28,
495 .tuner_type = UNSET,
496 .tuner_addr = ADDR_UNSET,
497 },
498 [BTTV_BOARD_MIROPRO] = {
499 .name = "MIRO PCTV pro",
500 .video_inputs = 3,
501 /* .audio_inputs= 1, */
502 .svhs = 2,
503 .gpiomask = 0x3014f,
504 .muxsel = MUXSEL(2, 3, 1, 1),
505 .gpiomux = { 0x20001,0x10001, 0, 0 },
506 .gpiomute = 10,
507 .needs_tvaudio = 1,
508 .tuner_type = UNSET,
509 .tuner_addr = ADDR_UNSET,
510 },
511
512 /* ---- card 0x0c ---------------------------------- */
513 [BTTV_BOARD_ADSTECH_TV] = {
514 .name = "ADS Technologies Channel Surfer TV (bt848)",
515 .video_inputs = 3,
516 /* .audio_inputs= 1, */
517 .svhs = 2,
518 .gpiomask = 15,
519 .muxsel = MUXSEL(2, 3, 1, 1),
520 .gpiomux = { 13, 14, 11, 7 },
521 .needs_tvaudio = 1,
522 .tuner_type = UNSET,
523 .tuner_addr = ADDR_UNSET,
524 },
525 [BTTV_BOARD_AVERMEDIA98] = {
526 .name = "AVerMedia TVCapture 98",
527 .video_inputs = 3,
528 /* .audio_inputs= 4, */
529 .svhs = 2,
530 .gpiomask = 15,
531 .muxsel = MUXSEL(2, 3, 1, 1),
532 .gpiomux = { 13, 14, 11, 7 },
533 .needs_tvaudio = 1,
534 .msp34xx_alt = 1,
535 .pll = PLL_28,
536 .tuner_type = TUNER_PHILIPS_PAL,
537 .tuner_addr = ADDR_UNSET,
538 .audio_mode_gpio= avermedia_tv_stereo_audio,
539 .no_gpioirq = 1,
540 },
541 [BTTV_BOARD_VHX] = {
542 .name = "Aimslab Video Highway Xtreme (VHX)",
543 .video_inputs = 3,
544 /* .audio_inputs= 1, */
545 .svhs = 2,
546 .gpiomask = 7,
547 .muxsel = MUXSEL(2, 3, 1, 1),
548 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
549 .gpiomute = 4,
550 .needs_tvaudio = 1,
551 .pll = PLL_28,
552 .tuner_type = UNSET,
553 .tuner_addr = ADDR_UNSET,
554 },
555 [BTTV_BOARD_ZOLTRIX] = {
556 .name = "Zoltrix TV-Max",
557 .video_inputs = 3,
558 /* .audio_inputs= 1, */
559 .svhs = 2,
560 .gpiomask = 15,
561 .muxsel = MUXSEL(2, 3, 1, 1),
562 .gpiomux = { 0, 0, 1, 0 },
563 .gpiomute = 10,
564 .needs_tvaudio = 1,
565 .tuner_type = UNSET,
566 .tuner_addr = ADDR_UNSET,
567 },
568
569 /* ---- card 0x10 ---------------------------------- */
570 [BTTV_BOARD_PIXVIEWPLAYTV] = {
571 .name = "Prolink Pixelview PlayTV (bt878)",
572 .video_inputs = 3,
573 /* .audio_inputs= 1, */
574 .svhs = 2,
575 .gpiomask = 0x01fe00,
576 .muxsel = MUXSEL(2, 3, 1, 1),
577 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
578 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
579 .gpiomute = 0x002000,
580 .needs_tvaudio = 1,
581 .pll = PLL_28,
582 .tuner_type = UNSET,
583 .tuner_addr = ADDR_UNSET,
584 },
585 [BTTV_BOARD_WINVIEW_601] = {
586 .name = "Leadtek WinView 601",
587 .video_inputs = 3,
588 /* .audio_inputs= 1, */
589 .svhs = 2,
590 .gpiomask = 0x8300f8,
591 .muxsel = MUXSEL(2, 3, 1, 1, 0),
592 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
593 .gpiomute = 0xcfa007,
594 .needs_tvaudio = 1,
595 .tuner_type = UNSET,
596 .tuner_addr = ADDR_UNSET,
597 .volume_gpio = winview_volume,
598 .has_radio = 1,
599 },
600 [BTTV_BOARD_AVEC_INTERCAP] = {
601 .name = "AVEC Intercapture",
602 .video_inputs = 3,
603 /* .audio_inputs= 2, */
604 .svhs = 2,
605 .gpiomask = 0,
606 .muxsel = MUXSEL(2, 3, 1, 1),
607 .gpiomux = { 1, 0, 0, 0 },
608 .needs_tvaudio = 1,
609 .tuner_type = UNSET,
610 .tuner_addr = ADDR_UNSET,
611 },
612 [BTTV_BOARD_LIFE_FLYKIT] = {
613 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
614 .video_inputs = 4,
615 /* .audio_inputs= 1, */
616 .svhs = NO_SVHS,
617 .gpiomask = 0x8dff00,
618 .muxsel = MUXSEL(2, 3, 1, 1),
619 .gpiomux = { 0 },
620 .no_msp34xx = 1,
621 .tuner_type = TUNER_ABSENT,
622 .tuner_addr = ADDR_UNSET,
623 },
624
625 /* ---- card 0x14 ---------------------------------- */
626 [BTTV_BOARD_CEI_RAFFLES] = {
627 .name = "CEI Raffles Card",
628 .video_inputs = 3,
629 /* .audio_inputs= 3, */
630 .svhs = 2,
631 .muxsel = MUXSEL(2, 3, 1, 1),
632 .tuner_type = UNSET,
633 .tuner_addr = ADDR_UNSET,
634 },
635 [BTTV_BOARD_CONFERENCETV] = {
636 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
637 .video_inputs = 4,
638 /* .audio_inputs= 2, tuner, line in */
639 .svhs = 2,
640 .gpiomask = 0x1800,
641 .muxsel = MUXSEL(2, 3, 1, 1),
642 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
643 .gpiomute = 0x1800,
644 .pll = PLL_28,
645 .tuner_type = TUNER_PHILIPS_PAL_I,
646 .tuner_addr = ADDR_UNSET,
647 },
648 [BTTV_BOARD_PHOEBE_TVMAS] = {
649 .name = "Askey CPH050/ Phoebe Tv Master + FM",
650 .video_inputs = 3,
651 /* .audio_inputs= 1, */
652 .svhs = 2,
653 .gpiomask = 0xc00,
654 .muxsel = MUXSEL(2, 3, 1, 1),
655 .gpiomux = { 0, 1, 0x800, 0x400 },
656 .gpiomute = 0xc00,
657 .needs_tvaudio = 1,
658 .pll = PLL_28,
659 .tuner_type = UNSET,
660 .tuner_addr = ADDR_UNSET,
661 },
662 [BTTV_BOARD_MODTEC_205] = {
663 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
664 .video_inputs = 3,
665 /* .audio_inputs= 1, */
666 .svhs = NO_SVHS,
667 .has_dig_in = 1,
668 .gpiomask = 7,
669 .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */
670 /* .digital_mode= DIGITAL_MODE_CAMERA, */
671 .gpiomux = { 0, 0, 0, 0 },
672 .no_msp34xx = 1,
673 .pll = PLL_28,
674 .tuner_type = TUNER_ALPS_TSBB5_PAL_I,
675 .tuner_addr = ADDR_UNSET,
676 },
677
678 /* ---- card 0x18 ---------------------------------- */
679 [BTTV_BOARD_MAGICTVIEW061] = {
680 .name = "Askey CPH05X/06X (bt878) [many vendors]",
681 .video_inputs = 3,
682 /* .audio_inputs= 1, */
683 .svhs = 2,
684 .gpiomask = 0xe00,
685 .muxsel = MUXSEL(2, 3, 1, 1),
686 .gpiomux = {0x400, 0x400, 0x400, 0x400 },
687 .gpiomute = 0xc00,
688 .needs_tvaudio = 1,
689 .pll = PLL_28,
690 .tuner_type = UNSET,
691 .tuner_addr = ADDR_UNSET,
692 .has_remote = 1,
693 },
694 [BTTV_BOARD_VOBIS_BOOSTAR] = {
695 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
696 .video_inputs = 3,
697 /* .audio_inputs= 1, */
698 .svhs = 2,
699 .gpiomask = 0x1f0fff,
700 .muxsel = MUXSEL(2, 3, 1, 1),
701 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
702 .gpiomute = 0x40000,
703 .needs_tvaudio = 0,
704 .tuner_type = TUNER_PHILIPS_PAL,
705 .tuner_addr = ADDR_UNSET,
706 .audio_mode_gpio= terratv_audio,
707 },
708 [BTTV_BOARD_HAUPPAUG_WCAM] = {
709 .name = "Hauppauge WinCam newer (bt878)",
710 .video_inputs = 4,
711 /* .audio_inputs= 1, */
712 .svhs = 3,
713 .gpiomask = 7,
714 .muxsel = MUXSEL(2, 0, 1, 1),
715 .gpiomux = { 0, 1, 2, 3 },
716 .gpiomute = 4,
717 .needs_tvaudio = 1,
718 .tuner_type = UNSET,
719 .tuner_addr = ADDR_UNSET,
720 },
721 [BTTV_BOARD_MAXI] = {
722 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
723 .video_inputs = 4,
724 /* .audio_inputs= 2, */
725 .svhs = 2,
726 .gpiomask = 0x1800,
727 .muxsel = MUXSEL(2, 3, 1, 1),
728 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
729 .gpiomute = 0x1800,
730 .pll = PLL_28,
731 .tuner_type = TUNER_PHILIPS_SECAM,
732 .tuner_addr = ADDR_UNSET,
733 },
734
735 /* ---- card 0x1c ---------------------------------- */
736 [BTTV_BOARD_TERRATV] = {
737 .name = "Terratec TerraTV+ Version 1.1 (bt878)",
738 .video_inputs = 3,
739 /* .audio_inputs= 1, */
740 .svhs = 2,
741 .gpiomask = 0x1f0fff,
742 .muxsel = MUXSEL(2, 3, 1, 1),
743 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
744 .gpiomute = 0x40000,
745 .needs_tvaudio = 0,
746 .tuner_type = TUNER_PHILIPS_PAL,
747 .tuner_addr = ADDR_UNSET,
748 .audio_mode_gpio= terratv_audio,
749 /* GPIO wiring:
750 External 20 pin connector (for Active Radio Upgrade board)
751 gpio00: i2c-sda
752 gpio01: i2c-scl
753 gpio02: om5610-data
754 gpio03: om5610-clk
755 gpio04: om5610-wre
756 gpio05: om5610-stereo
757 gpio06: rds6588-davn
758 gpio07: Pin 7 n.c.
759 gpio08: nIOW
760 gpio09+10: nIOR, nSEL ?? (bt878)
761 gpio09: nIOR (bt848)
762 gpio10: nSEL (bt848)
763 Sound Routing:
764 gpio16: u2-A0 (1st 4052bt)
765 gpio17: u2-A1
766 gpio18: u2-nEN
767 gpio19: u4-A0 (2nd 4052)
768 gpio20: u4-A1
769 u4-nEN - GND
770 Btspy:
771 00000 : Cdrom (internal audio input)
772 10000 : ext. Video audio input
773 20000 : TV Mono
774 a0000 : TV Mono/2
775 1a0000 : TV Stereo
776 30000 : Radio
777 40000 : Mute
778 */
779
780 },
781 [BTTV_BOARD_PXC200] = {
782 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
783 .name = "Imagenation PXC200",
784 .video_inputs = 5,
785 /* .audio_inputs= 1, */
786 .svhs = 1, /* was: 4 */
787 .gpiomask = 0,
788 .muxsel = MUXSEL(2, 3, 1, 0, 0),
789 .gpiomux = { 0 },
790 .needs_tvaudio = 1,
791 .tuner_type = TUNER_ABSENT,
792 .tuner_addr = ADDR_UNSET,
793 .muxsel_hook = PXC200_muxsel,
794
795 },
796 [BTTV_BOARD_FLYVIDEO_98] = {
797 .name = "Lifeview FlyVideo 98 LR50",
798 .video_inputs = 4,
799 /* .audio_inputs= 1, */
800 .svhs = 2,
801 .gpiomask = 0x1800, /* 0x8dfe00 */
802 .muxsel = MUXSEL(2, 3, 1, 1),
803 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
804 .gpiomute = 0x1800,
805 .pll = PLL_28,
806 .tuner_type = UNSET,
807 .tuner_addr = ADDR_UNSET,
808 },
809 [BTTV_BOARD_IPROTV] = {
810 .name = "Formac iProTV, Formac ProTV I (bt848)",
811 .video_inputs = 4,
812 /* .audio_inputs= 1, */
813 .svhs = 3,
814 .gpiomask = 1,
815 .muxsel = MUXSEL(2, 3, 1, 1),
816 .gpiomux = { 1, 0, 0, 0 },
817 .pll = PLL_28,
818 .tuner_type = TUNER_PHILIPS_PAL,
819 .tuner_addr = ADDR_UNSET,
820 },
821
822 /* ---- card 0x20 ---------------------------------- */
823 [BTTV_BOARD_INTEL_C_S_PCI] = {
824 .name = "Intel Create and Share PCI/ Smart Video Recorder III",
825 .video_inputs = 4,
826 /* .audio_inputs= 0, */
827 .svhs = 2,
828 .gpiomask = 0,
829 .muxsel = MUXSEL(2, 3, 1, 1),
830 .gpiomux = { 0 },
831 .needs_tvaudio = 0,
832 .tuner_type = TUNER_ABSENT,
833 .tuner_addr = ADDR_UNSET,
834 },
835 [BTTV_BOARD_TERRATVALUE] = {
836 .name = "Terratec TerraTValue Version Bt878",
837 .video_inputs = 3,
838 /* .audio_inputs= 1, */
839 .svhs = 2,
840 .gpiomask = 0xffff00,
841 .muxsel = MUXSEL(2, 3, 1, 1),
842 .gpiomux = { 0x500, 0, 0x300, 0x900 },
843 .gpiomute = 0x900,
844 .needs_tvaudio = 1,
845 .pll = PLL_28,
846 .tuner_type = TUNER_PHILIPS_PAL,
847 .tuner_addr = ADDR_UNSET,
848 },
849 [BTTV_BOARD_WINFAST2000] = {
850 .name = "Leadtek WinFast 2000/ WinFast 2000 XP",
851 .video_inputs = 4,
852 /* .audio_inputs= 1, */
853 .svhs = 2,
854 /* TV, CVid, SVid, CVid over SVid connector */
855 .muxsel = MUXSEL(2, 3, 1, 1, 0),
856 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
857 .gpiomask = 0xb33000,
858 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
859 .gpiomute = 0x800000,
860 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
861 gpio23 -- hef4052:nEnable (0x800000)
862 gpio12 -- hef4052:A1
863 gpio13 -- hef4052:A0
864 0x0000: external audio
865 0x1000: FM
866 0x2000: TV
867 0x3000: n.c.
868 Note: There exists another variant "Winfast 2000" with tv stereo !?
869 Note: eeprom only contains FF and pci subsystem id 107d:6606
870 */
871 .needs_tvaudio = 0,
872 .pll = PLL_28,
873 .has_radio = 1,
874 .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
875 .tuner_addr = ADDR_UNSET,
876 .audio_mode_gpio= winfast2000_audio,
877 .has_remote = 1,
878 },
879 [BTTV_BOARD_CHRONOS_VS2] = {
880 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
881 .video_inputs = 4,
882 /* .audio_inputs= 3, */
883 .svhs = 2,
884 .gpiomask = 0x1800,
885 .muxsel = MUXSEL(2, 3, 1, 1),
886 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
887 .gpiomute = 0x1800,
888 .pll = PLL_28,
889 .tuner_type = UNSET,
890 .tuner_addr = ADDR_UNSET,
891 },
892
893 /* ---- card 0x24 ---------------------------------- */
894 [BTTV_BOARD_TYPHOON_TVIEW] = {
895 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
896 .video_inputs = 4,
897 /* .audio_inputs= 3, */
898 .svhs = 2,
899 .gpiomask = 0x1800,
900 .muxsel = MUXSEL(2, 3, 1, 1),
901 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
902 .gpiomute = 0x1800,
903 .pll = PLL_28,
904 .tuner_type = UNSET,
905 .tuner_addr = ADDR_UNSET,
906 .has_radio = 1,
907 },
908 [BTTV_BOARD_PXELVWPLTVPRO] = {
909 .name = "Prolink PixelView PlayTV pro",
910 .video_inputs = 3,
911 /* .audio_inputs= 1, */
912 .svhs = 2,
913 .gpiomask = 0xff,
914 .muxsel = MUXSEL(2, 3, 1, 1),
915 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
916 .gpiomute = 0x29,
917 .no_msp34xx = 1,
918 .pll = PLL_28,
919 .tuner_type = UNSET,
920 .tuner_addr = ADDR_UNSET,
921 },
922 [BTTV_BOARD_MAGICTVIEW063] = {
923 .name = "Askey CPH06X TView99",
924 .video_inputs = 4,
925 /* .audio_inputs= 1, */
926 .svhs = 2,
927 .gpiomask = 0x551e00,
928 .muxsel = MUXSEL(2, 3, 1, 0),
929 .gpiomux = { 0x551400, 0x551200, 0, 0 },
930 .gpiomute = 0x551c00,
931 .needs_tvaudio = 1,
932 .pll = PLL_28,
933 .tuner_type = TUNER_PHILIPS_PAL_I,
934 .tuner_addr = ADDR_UNSET,
935 .has_remote = 1,
936 },
937 [BTTV_BOARD_PINNACLE] = {
938 .name = "Pinnacle PCTV Studio/Rave",
939 .video_inputs = 3,
940 /* .audio_inputs= 1, */
941 .svhs = 2,
942 .gpiomask = 0x03000F,
943 .muxsel = MUXSEL(2, 3, 1, 1),
944 .gpiomux = { 2, 0xd0001, 0, 0 },
945 .gpiomute = 1,
946 .needs_tvaudio = 0,
947 .pll = PLL_28,
948 .tuner_type = UNSET,
949 .tuner_addr = ADDR_UNSET,
950 },
951
952 /* ---- card 0x28 ---------------------------------- */
953 [BTTV_BOARD_STB2] = {
954 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
955 .video_inputs = 3,
956 /* .audio_inputs= 1, */
957 .svhs = 2,
958 .gpiomask = 7,
959 .muxsel = MUXSEL(2, 3, 1, 1),
960 .gpiomux = { 4, 0, 2, 3 },
961 .gpiomute = 1,
962 .no_msp34xx = 1,
963 .needs_tvaudio = 1,
964 .tuner_type = TUNER_PHILIPS_NTSC,
965 .tuner_addr = ADDR_UNSET,
966 .pll = PLL_28,
967 .has_radio = 1,
968 },
969 [BTTV_BOARD_AVPHONE98] = {
970 .name = "AVerMedia TVPhone 98",
971 .video_inputs = 3,
972 /* .audio_inputs= 4, */
973 .svhs = 2,
974 .gpiomask = 15,
975 .muxsel = MUXSEL(2, 3, 1, 1),
976 .gpiomux = { 13, 4, 11, 7 },
977 .needs_tvaudio = 1,
978 .pll = PLL_28,
979 .tuner_type = UNSET,
980 .tuner_addr = ADDR_UNSET,
981 .has_radio = 1,
982 .audio_mode_gpio= avermedia_tvphone_audio,
983 },
984 [BTTV_BOARD_PV951] = {
985 .name = "ProVideo PV951", /* pic16c54 */
986 .video_inputs = 3,
987 /* .audio_inputs= 1, */
988 .svhs = 2,
989 .gpiomask = 0,
990 .muxsel = MUXSEL(2, 3, 1, 1),
991 .gpiomux = { 0, 0, 0, 0},
992 .needs_tvaudio = 1,
993 .no_msp34xx = 1,
994 .pll = PLL_28,
995 .tuner_type = TUNER_PHILIPS_PAL_I,
996 .tuner_addr = ADDR_UNSET,
997 },
998 [BTTV_BOARD_ONAIR_TV] = {
999 .name = "Little OnAir TV",
1000 .video_inputs = 3,
1001 /* .audio_inputs= 1, */
1002 .svhs = 2,
1003 .gpiomask = 0xe00b,
1004 .muxsel = MUXSEL(2, 3, 1, 1),
1005 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
1006 .gpiomute = 0xff3ffc,
1007 .no_msp34xx = 1,
1008 .tuner_type = UNSET,
1009 .tuner_addr = ADDR_UNSET,
1010 },
1011
1012 /* ---- card 0x2c ---------------------------------- */
1013 [BTTV_BOARD_SIGMA_TVII_FM] = {
1014 .name = "Sigma TVII-FM",
1015 .video_inputs = 2,
1016 /* .audio_inputs= 1, */
1017 .svhs = NO_SVHS,
1018 .gpiomask = 3,
1019 .muxsel = MUXSEL(2, 3, 1, 1),
1020 .gpiomux = { 1, 1, 0, 2 },
1021 .gpiomute = 3,
1022 .no_msp34xx = 1,
1023 .pll = PLL_NONE,
1024 .tuner_type = UNSET,
1025 .tuner_addr = ADDR_UNSET,
1026 },
1027 [BTTV_BOARD_MATRIX_VISION2] = {
1028 .name = "MATRIX-Vision MV-Delta 2",
1029 .video_inputs = 5,
1030 /* .audio_inputs= 1, */
1031 .svhs = 3,
1032 .gpiomask = 0,
1033 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1034 .gpiomux = { 0 },
1035 .no_msp34xx = 1,
1036 .pll = PLL_28,
1037 .tuner_type = TUNER_ABSENT,
1038 .tuner_addr = ADDR_UNSET,
1039 },
1040 [BTTV_BOARD_ZOLTRIX_GENIE] = {
1041 .name = "Zoltrix Genie TV/FM",
1042 .video_inputs = 3,
1043 /* .audio_inputs= 1, */
1044 .svhs = 2,
1045 .gpiomask = 0xbcf03f,
1046 .muxsel = MUXSEL(2, 3, 1, 1),
1047 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1048 .gpiomute = 0xbcb03f,
1049 .no_msp34xx = 1,
1050 .pll = PLL_28,
1051 .tuner_type = TUNER_TEMIC_4039FR5_NTSC,
1052 .tuner_addr = ADDR_UNSET,
1053 },
1054 [BTTV_BOARD_TERRATVRADIO] = {
1055 .name = "Terratec TV/Radio+",
1056 .video_inputs = 3,
1057 /* .audio_inputs= 1, */
1058 .svhs = 2,
1059 .gpiomask = 0x70000,
1060 .muxsel = MUXSEL(2, 3, 1, 1),
1061 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
1062 .gpiomute = 0x40000,
1063 .needs_tvaudio = 1,
1064 .no_msp34xx = 1,
1065 .pll = PLL_35,
1066 .tuner_type = TUNER_PHILIPS_PAL_I,
1067 .tuner_addr = ADDR_UNSET,
1068 .has_radio = 1,
1069 },
1070
1071 /* ---- card 0x30 ---------------------------------- */
1072 [BTTV_BOARD_DYNALINK] = {
1073 .name = "Askey CPH03x/ Dynalink Magic TView",
1074 .video_inputs = 3,
1075 /* .audio_inputs= 1, */
1076 .svhs = 2,
1077 .gpiomask = 15,
1078 .muxsel = MUXSEL(2, 3, 1, 1),
1079 .gpiomux = {2,0,0,0 },
1080 .gpiomute = 1,
1081 .needs_tvaudio = 1,
1082 .pll = PLL_28,
1083 .tuner_type = UNSET,
1084 .tuner_addr = ADDR_UNSET,
1085 },
1086 [BTTV_BOARD_GVBCTV3PCI] = {
1087 .name = "IODATA GV-BCTV3/PCI",
1088 .video_inputs = 3,
1089 /* .audio_inputs= 1, */
1090 .svhs = 2,
1091 .gpiomask = 0x010f00,
1092 .muxsel = MUXSEL(2, 3, 0, 0),
1093 .gpiomux = {0x10000, 0, 0x10000, 0 },
1094 .no_msp34xx = 1,
1095 .pll = PLL_28,
1096 .tuner_type = TUNER_ALPS_TSHC6_NTSC,
1097 .tuner_addr = ADDR_UNSET,
1098 .audio_mode_gpio= gvbctv3pci_audio,
1099 },
1100 [BTTV_BOARD_PXELVWPLTVPAK] = {
1101 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1102 .video_inputs = 5,
1103 /* .audio_inputs= 1, */
1104 .svhs = 3,
1105 .has_dig_in = 1,
1106 .gpiomask = 0xAA0000,
1107 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1108 /* .digital_mode= DIGITAL_MODE_CAMERA, */
1109 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
1110 .gpiomute = 0xa8000,
1111 .no_msp34xx = 1,
1112 .pll = PLL_28,
1113 .tuner_type = TUNER_PHILIPS_PAL_I,
1114 .tuner_addr = ADDR_UNSET,
1115 .has_remote = 1,
1116 /* GPIO wiring: (different from Rev.4C !)
1117 GPIO17: U4.A0 (first hef4052bt)
1118 GPIO19: U4.A1
1119 GPIO20: U5.A1 (second hef4052bt)
1120 GPIO21: U4.nEN
1121 GPIO22: BT832 Reset Line
1122 GPIO23: A5,A0, U5,nEN
1123 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1124 */
1125 },
1126 [BTTV_BOARD_EAGLE] = {
1127 .name = "Eagle Wireless Capricorn2 (bt878A)",
1128 .video_inputs = 4,
1129 /* .audio_inputs= 1, */
1130 .svhs = 2,
1131 .gpiomask = 7,
1132 .muxsel = MUXSEL(2, 0, 1, 1),
1133 .gpiomux = { 0, 1, 2, 3 },
1134 .gpiomute = 4,
1135 .pll = PLL_28,
1136 .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1137 .tuner_addr = ADDR_UNSET,
1138 },
1139
1140 /* ---- card 0x34 ---------------------------------- */
1141 [BTTV_BOARD_PINNACLEPRO] = {
1142 /* David Härdeman <david@2gen.com> */
1143 .name = "Pinnacle PCTV Studio Pro",
1144 .video_inputs = 4,
1145 /* .audio_inputs= 1, */
1146 .svhs = 3,
1147 .gpiomask = 0x03000F,
1148 .muxsel = MUXSEL(2, 3, 1, 1),
1149 .gpiomux = { 1, 0xd0001, 0, 0 },
1150 .gpiomute = 10,
1151 /* sound path (5 sources):
1152 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1153 0= ext. Audio IN
1154 1= from MUX2
1155 2= Mono TV sound from Tuner
1156 3= not connected
1157 MUX2 (mask 0x30000):
1158 0,2,3= from MSP34xx
1159 1= FM stereo Radio from Tuner */
1160 .needs_tvaudio = 0,
1161 .pll = PLL_28,
1162 .tuner_type = UNSET,
1163 .tuner_addr = ADDR_UNSET,
1164 },
1165 [BTTV_BOARD_TVIEW_RDS_FM] = {
1166 /* Claas Langbehn <claas@bigfoot.com>,
1167 Sven Grothklags <sven@upb.de> */
1168 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1169 .video_inputs = 4,
1170 /* .audio_inputs= 3, */
1171 .svhs = 2,
1172 .gpiomask = 0x1c,
1173 .muxsel = MUXSEL(2, 3, 1, 1),
1174 .gpiomux = { 0, 0, 0x10, 8 },
1175 .gpiomute = 4,
1176 .needs_tvaudio = 1,
1177 .pll = PLL_28,
1178 .tuner_type = TUNER_PHILIPS_PAL,
1179 .tuner_addr = ADDR_UNSET,
1180 .has_radio = 1,
1181 },
1182 [BTTV_BOARD_LIFETEC_9415] = {
1183 /* Tim Röstermundt <rosterm@uni-muenster.de>
1184 in de.comp.os.unix.linux.hardware:
1185 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1186 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1187 options tuner type=5 */
1188 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1189 .video_inputs = 4,
1190 /* .audio_inputs= 1, */
1191 .svhs = 2,
1192 .gpiomask = 0x18e0,
1193 .muxsel = MUXSEL(2, 3, 1, 1),
1194 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1195 .gpiomute = 0x18e0,
1196 /* For cards with tda9820/tda9821:
1197 0x0000: Tuner normal stereo
1198 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1199 0x0880: Tuner A2 stereo */
1200 .pll = PLL_28,
1201 .tuner_type = UNSET,
1202 .tuner_addr = ADDR_UNSET,
1203 },
1204 [BTTV_BOARD_BESTBUY_EASYTV] = {
1205 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1206 old Easy TV BT848 version (model CPH031) */
1207 .name = "Askey CPH031/ BESTBUY Easy TV",
1208 .video_inputs = 4,
1209 /* .audio_inputs= 1, */
1210 .svhs = 2,
1211 .gpiomask = 0xF,
1212 .muxsel = MUXSEL(2, 3, 1, 0),
1213 .gpiomux = { 2, 0, 0, 0 },
1214 .gpiomute = 10,
1215 .needs_tvaudio = 0,
1216 .pll = PLL_28,
1217 .tuner_type = TUNER_TEMIC_PAL,
1218 .tuner_addr = ADDR_UNSET,
1219 },
1220
1221 /* ---- card 0x38 ---------------------------------- */
1222 [BTTV_BOARD_FLYVIDEO_98FM] = {
1223 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1224 .name = "Lifeview FlyVideo 98FM LR50",
1225 .video_inputs = 4,
1226 /* .audio_inputs= 3, */
1227 .svhs = 2,
1228 .gpiomask = 0x1800,
1229 .muxsel = MUXSEL(2, 3, 1, 1),
1230 .gpiomux = { 0, 0x800, 0x1000, 0x1000 },
1231 .gpiomute = 0x1800,
1232 .pll = PLL_28,
1233 .tuner_type = TUNER_PHILIPS_PAL,
1234 .tuner_addr = ADDR_UNSET,
1235 },
1236 /* This is the ultimate cheapo capture card
1237 * just a BT848A on a small PCB!
1238 * Steve Hosgood <steve@equiinet.com> */
1239 [BTTV_BOARD_GRANDTEC] = {
1240 .name = "GrandTec 'Grand Video Capture' (Bt848)",
1241 .video_inputs = 2,
1242 /* .audio_inputs= 0, */
1243 .svhs = 1,
1244 .gpiomask = 0,
1245 .muxsel = MUXSEL(3, 1),
1246 .gpiomux = { 0 },
1247 .needs_tvaudio = 0,
1248 .no_msp34xx = 1,
1249 .pll = PLL_35,
1250 .tuner_type = TUNER_ABSENT,
1251 .tuner_addr = ADDR_UNSET,
1252 },
1253 [BTTV_BOARD_ASKEY_CPH060] = {
1254 /* Daniel Herrington <daniel.herrington@home.com> */
1255 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1256 .video_inputs = 3,
1257 /* .audio_inputs= 1, */
1258 .svhs = 2,
1259 .gpiomask = 0xe00,
1260 .muxsel = MUXSEL(2, 3, 1, 1),
1261 .gpiomux = { 0x400, 0x400, 0x400, 0x400 },
1262 .gpiomute = 0x800,
1263 .needs_tvaudio = 1,
1264 .pll = PLL_28,
1265 .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
1266 .tuner_addr = ADDR_UNSET,
1267 },
1268 [BTTV_BOARD_ASKEY_CPH03X] = {
1269 /* Matti Mottus <mottus@physic.ut.ee> */
1270 .name = "Askey CPH03x TV Capturer",
1271 .video_inputs = 4,
1272 /* .audio_inputs= 1, */
1273 .svhs = 2,
1274 .gpiomask = 0x03000F,
1275 .muxsel = MUXSEL(2, 3, 1, 0),
1276 .gpiomux = { 2, 0, 0, 0 },
1277 .gpiomute = 1,
1278 .pll = PLL_28,
1279 .tuner_type = TUNER_TEMIC_PAL,
1280 .tuner_addr = ADDR_UNSET,
1281 .has_remote = 1,
1282 },
1283
1284 /* ---- card 0x3c ---------------------------------- */
1285 [BTTV_BOARD_MM100PCTV] = {
1286 /* Philip Blundell <philb@gnu.org> */
1287 .name = "Modular Technology MM100PCTV",
1288 .video_inputs = 2,
1289 /* .audio_inputs= 2, */
1290 .svhs = NO_SVHS,
1291 .gpiomask = 11,
1292 .muxsel = MUXSEL(2, 3, 1, 1),
1293 .gpiomux = { 2, 0, 0, 1 },
1294 .gpiomute = 8,
1295 .pll = PLL_35,
1296 .tuner_type = TUNER_TEMIC_PAL,
1297 .tuner_addr = ADDR_UNSET,
1298 },
1299 [BTTV_BOARD_GMV1] = {
1300 /* Adrian Cox <adrian@humboldt.co.uk */
1301 .name = "AG Electronics GMV1",
1302 .video_inputs = 2,
1303 /* .audio_inputs= 0, */
1304 .svhs = 1,
1305 .gpiomask = 0xF,
1306 .muxsel = MUXSEL(2, 2),
1307 .gpiomux = { },
1308 .no_msp34xx = 1,
1309 .needs_tvaudio = 0,
1310 .pll = PLL_28,
1311 .tuner_type = TUNER_ABSENT,
1312 .tuner_addr = ADDR_UNSET,
1313 },
1314 [BTTV_BOARD_BESTBUY_EASYTV2] = {
1315 /* Miguel Angel Alvarez <maacruz@navegalia.com>
1316 new Easy TV BT878 version (model CPH061)
1317 special thanks to Informatica Mieres for providing the card */
1318 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1319 .video_inputs = 3,
1320 /* .audio_inputs= 2, */
1321 .svhs = 2,
1322 .gpiomask = 0xFF,
1323 .muxsel = MUXSEL(2, 3, 1, 0),
1324 .gpiomux = { 1, 0, 4, 4 },
1325 .gpiomute = 9,
1326 .needs_tvaudio = 0,
1327 .pll = PLL_28,
1328 .tuner_type = TUNER_PHILIPS_PAL,
1329 .tuner_addr = ADDR_UNSET,
1330 },
1331 [BTTV_BOARD_ATI_TVWONDER] = {
1332 /* Lukas Gebauer <geby@volny.cz> */
1333 .name = "ATI TV-Wonder",
1334 .video_inputs = 3,
1335 /* .audio_inputs= 1, */
1336 .svhs = 2,
1337 .gpiomask = 0xf03f,
1338 .muxsel = MUXSEL(2, 3, 1, 0),
1339 .gpiomux = { 0xbffe, 0, 0xbfff, 0 },
1340 .gpiomute = 0xbffe,
1341 .pll = PLL_28,
1342 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1343 .tuner_addr = ADDR_UNSET,
1344 },
1345
1346 /* ---- card 0x40 ---------------------------------- */
1347 [BTTV_BOARD_ATI_TVWONDERVE] = {
1348 /* Lukas Gebauer <geby@volny.cz> */
1349 .name = "ATI TV-Wonder VE",
1350 .video_inputs = 2,
1351 /* .audio_inputs= 1, */
1352 .svhs = NO_SVHS,
1353 .gpiomask = 1,
1354 .muxsel = MUXSEL(2, 3, 0, 1),
1355 .gpiomux = { 0, 0, 1, 0 },
1356 .no_msp34xx = 1,
1357 .pll = PLL_28,
1358 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
1359 .tuner_addr = ADDR_UNSET,
1360 },
1361 [BTTV_BOARD_FLYVIDEO2000] = {
1362 /* DeeJay <deejay@westel900.net (2000S) */
1363 .name = "Lifeview FlyVideo 2000S LR90",
1364 .video_inputs = 3,
1365 /* .audio_inputs= 3, */
1366 .svhs = 2,
1367 .gpiomask = 0x18e0,
1368 .muxsel = MUXSEL(2, 3, 0, 1),
1369 /* Radio changed from 1e80 to 0x800 to make
1370 FlyVideo2000S in .hu happy (gm)*/
1371 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1372 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
1373 .gpiomute = 0x1800,
1374 .audio_mode_gpio= fv2000s_audio,
1375 .no_msp34xx = 1,
1376 .no_tda9875 = 1,
1377 .needs_tvaudio = 1,
1378 .pll = PLL_28,
1379 .tuner_type = TUNER_PHILIPS_PAL,
1380 .tuner_addr = ADDR_UNSET,
1381 },
1382 [BTTV_BOARD_TERRATVALUER] = {
1383 .name = "Terratec TValueRadio",
1384 .video_inputs = 3,
1385 /* .audio_inputs= 1, */
1386 .svhs = 2,
1387 .gpiomask = 0xffff00,
1388 .muxsel = MUXSEL(2, 3, 1, 1),
1389 .gpiomux = { 0x500, 0x500, 0x300, 0x900 },
1390 .gpiomute = 0x900,
1391 .needs_tvaudio = 1,
1392 .pll = PLL_28,
1393 .tuner_type = TUNER_PHILIPS_PAL,
1394 .tuner_addr = ADDR_UNSET,
1395 .has_radio = 1,
1396 },
1397 [BTTV_BOARD_GVBCTV4PCI] = {
1398 /* TANAKA Kei <peg00625@nifty.com> */
1399 .name = "IODATA GV-BCTV4/PCI",
1400 .video_inputs = 3,
1401 /* .audio_inputs= 1, */
1402 .svhs = 2,
1403 .gpiomask = 0x010f00,
1404 .muxsel = MUXSEL(2, 3, 0, 0),
1405 .gpiomux = {0x10000, 0, 0x10000, 0 },
1406 .no_msp34xx = 1,
1407 .pll = PLL_28,
1408 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
1409 .tuner_addr = ADDR_UNSET,
1410 .audio_mode_gpio= gvbctv3pci_audio,
1411 },
1412
1413 /* ---- card 0x44 ---------------------------------- */
1414 [BTTV_BOARD_VOODOOTV_FM] = {
1415 .name = "3Dfx VoodooTV FM (Euro)",
1416 /* try "insmod msp3400 simple=0" if you have
1417 * sound problems with this card. */
1418 .video_inputs = 4,
1419 /* .audio_inputs= 1, */
1420 .svhs = NO_SVHS,
1421 .gpiomask = 0x4f8a00,
1422 /* 0x100000: 1=MSP enabled (0=disable again)
1423 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1424 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1425 .gpiomute = 0x947fff,
1426 /* tvtuner, radio, external,internal, mute, stereo
1427 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1428 .muxsel = MUXSEL(2, 3, 0, 1),
1429 .tuner_type = TUNER_MT2032,
1430 .tuner_addr = ADDR_UNSET,
1431 .pll = PLL_28,
1432 .has_radio = 1,
1433 },
1434 [BTTV_BOARD_VOODOOTV_200] = {
1435 .name = "VoodooTV 200 (USA)",
1436 /* try "insmod msp3400 simple=0" if you have
1437 * sound problems with this card. */
1438 .video_inputs = 4,
1439 /* .audio_inputs= 1, */
1440 .svhs = NO_SVHS,
1441 .gpiomask = 0x4f8a00,
1442 /* 0x100000: 1=MSP enabled (0=disable again)
1443 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1444 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
1445 .gpiomute = 0x947fff,
1446 /* tvtuner, radio, external,internal, mute, stereo
1447 * tuner, Composit, SVid, Composit-on-Svid-adapter */
1448 .muxsel = MUXSEL(2, 3, 0, 1),
1449 .tuner_type = TUNER_MT2032,
1450 .tuner_addr = ADDR_UNSET,
1451 .pll = PLL_28,
1452 .has_radio = 1,
1453 },
1454 [BTTV_BOARD_AIMMS] = {
1455 /* Philip Blundell <pb@nexus.co.uk> */
1456 .name = "Active Imaging AIMMS",
1457 .video_inputs = 1,
1458 /* .audio_inputs= 0, */
1459 .tuner_type = TUNER_ABSENT,
1460 .tuner_addr = ADDR_UNSET,
1461 .pll = PLL_28,
1462 .muxsel = MUXSEL(2),
1463 .gpiomask = 0
1464 },
1465 [BTTV_BOARD_PV_BT878P_PLUS] = {
1466 /* Tomasz Pyra <hellfire@sedez.iq.pl> */
1467 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1468 .video_inputs = 3,
1469 /* .audio_inputs= 4, */
1470 .svhs = 2,
1471 .gpiomask = 15,
1472 .muxsel = MUXSEL(2, 3, 1, 1),
1473 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1474 .gpiomute = 13,
1475 .needs_tvaudio = 1,
1476 .pll = PLL_28,
1477 .tuner_type = TUNER_LG_PAL_I_FM,
1478 .tuner_addr = ADDR_UNSET,
1479 .has_remote = 1,
1480 /* GPIO wiring:
1481 GPIO0: U4.A0 (hef4052bt)
1482 GPIO1: U4.A1
1483 GPIO2: U4.A1 (second hef4052bt)
1484 GPIO3: U4.nEN, U5.A0, A5.nEN
1485 GPIO8-15: vrd866b ?
1486 */
1487 },
1488 [BTTV_BOARD_FLYVIDEO98EZ] = {
1489 .name = "Lifeview FlyVideo 98EZ (capture only) LR51",
1490 .video_inputs = 4,
1491 /* .audio_inputs= 0, */
1492 .svhs = 2,
1493 /* AV1, AV2, SVHS, CVid adapter on SVHS */
1494 .muxsel = MUXSEL(2, 3, 1, 1),
1495 .pll = PLL_28,
1496 .no_msp34xx = 1,
1497 .tuner_type = TUNER_ABSENT,
1498 .tuner_addr = ADDR_UNSET,
1499 },
1500
1501 /* ---- card 0x48 ---------------------------------- */
1502 [BTTV_BOARD_PV_BT878P_9B] = {
1503 /* Dariusz Kowalewski <darekk@automex.pl> */
1504 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1505 .video_inputs = 4,
1506 /* .audio_inputs= 1, */
1507 .svhs = 2,
1508 .gpiomask = 0x3f,
1509 .muxsel = MUXSEL(2, 3, 1, 1),
1510 .gpiomux = { 0x01, 0x00, 0x03, 0x03 },
1511 .gpiomute = 0x09,
1512 .needs_tvaudio = 1,
1513 .no_msp34xx = 1,
1514 .no_tda9875 = 1,
1515 .pll = PLL_28,
1516 .tuner_type = TUNER_PHILIPS_PAL,
1517 .tuner_addr = ADDR_UNSET,
1518 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1519 .has_radio = 1, /* Note: not all cards have radio */
1520 .has_remote = 1,
1521 /* GPIO wiring:
1522 GPIO0: A0 hef4052
1523 GPIO1: A1 hef4052
1524 GPIO3: nEN hef4052
1525 GPIO8-15: vrd866b
1526 GPIO20,22,23: R30,R29,R28
1527 */
1528 },
1529 [BTTV_BOARD_SENSORAY311] = {
1530 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1531 /* you must jumper JP5 for the card to work */
1532 .name = "Sensoray 311",
1533 .video_inputs = 5,
1534 /* .audio_inputs= 0, */
1535 .svhs = 4,
1536 .gpiomask = 0,
1537 .muxsel = MUXSEL(2, 3, 1, 0, 0),
1538 .gpiomux = { 0 },
1539 .needs_tvaudio = 0,
1540 .tuner_type = TUNER_ABSENT,
1541 .tuner_addr = ADDR_UNSET,
1542 },
1543 [BTTV_BOARD_RV605] = {
1544 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1545 .name = "RemoteVision MX (RV605)",
1546 .video_inputs = 16,
1547 /* .audio_inputs= 0, */
1548 .svhs = NO_SVHS,
1549 .gpiomask = 0x00,
1550 .gpiomask2 = 0x07ff,
1551 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1552 .no_msp34xx = 1,
1553 .no_tda9875 = 1,
1554 .tuner_type = TUNER_ABSENT,
1555 .tuner_addr = ADDR_UNSET,
1556 .muxsel_hook = rv605_muxsel,
1557 },
1558 [BTTV_BOARD_POWERCLR_MTV878] = {
1559 .name = "Powercolor MTV878/ MTV878R/ MTV878F",
1560 .video_inputs = 3,
1561 /* .audio_inputs= 2, */
1562 .svhs = 2,
1563 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1564 .muxsel = MUXSEL(2, 1, 1),
1565 .gpiomux = { 0, 1, 2, 2 },
1566 .gpiomute = 4,
1567 .needs_tvaudio = 0,
1568 .tuner_type = TUNER_PHILIPS_PAL,
1569 .tuner_addr = ADDR_UNSET,
1570 .pll = PLL_28,
1571 .has_radio = 1,
1572 },
1573
1574 /* ---- card 0x4c ---------------------------------- */
1575 [BTTV_BOARD_WINDVR] = {
1576 /* Masaki Suzuki <masaki@btree.org> */
1577 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1578 .video_inputs = 3,
1579 /* .audio_inputs= 1, */
1580 .svhs = 2,
1581 .gpiomask = 0x140007,
1582 .muxsel = MUXSEL(2, 3, 1, 1),
1583 .gpiomux = { 0, 1, 2, 3 },
1584 .gpiomute = 4,
1585 .tuner_type = TUNER_PHILIPS_NTSC,
1586 .tuner_addr = ADDR_UNSET,
1587 .audio_mode_gpio= windvr_audio,
1588 },
1589 [BTTV_BOARD_GRANDTEC_MULTI] = {
1590 .name = "GrandTec Multi Capture Card (Bt878)",
1591 .video_inputs = 4,
1592 /* .audio_inputs= 0, */
1593 .svhs = NO_SVHS,
1594 .gpiomask = 0,
1595 .muxsel = MUXSEL(2, 3, 1, 0),
1596 .gpiomux = { 0 },
1597 .needs_tvaudio = 0,
1598 .no_msp34xx = 1,
1599 .pll = PLL_28,
1600 .tuner_type = TUNER_ABSENT,
1601 .tuner_addr = ADDR_UNSET,
1602 },
1603 [BTTV_BOARD_KWORLD] = {
1604 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1605 .video_inputs = 4,
1606 /* .audio_inputs= 3, */
1607 .svhs = 2,
1608 .gpiomask = 7,
1609 /* Tuner, SVid, SVHS, SVid to SVHS connector */
1610 .muxsel = MUXSEL(2, 3, 1, 1),
1611 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1612 * This card lacks external Audio In, so we mute it on Ext. & Int.
1613 * The PCB can take a sbx1637/sbx1673, wiring unknown.
1614 * This card lacks PCI subsystem ID, sigh.
1615 * gpiomux =1: lower volume, 2+3: mute
1616 * btwincap uses 0x80000/0x80003
1617 */
1618 .gpiomute = 4,
1619 .needs_tvaudio = 0,
1620 .no_msp34xx = 1,
1621 .pll = PLL_28,
1622 .tuner_type = TUNER_PHILIPS_PAL,
1623 .tuner_addr = ADDR_UNSET,
1624 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1625 radio signal strength indicators work fine. */
1626 .has_radio = 1,
1627 /* GPIO Info:
1628 GPIO0,1: HEF4052 A0,A1
1629 GPIO2: HEF4052 nENABLE
1630 GPIO3-7: n.c.
1631 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1632 GPIO14,15: ??
1633 GPIO16-21: n.c.
1634 GPIO22,23: ??
1635 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1636 },
1637 [BTTV_BOARD_DSP_TCVIDEO] = {
1638 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1639 .name = "DSP Design TCVIDEO",
1640 .video_inputs = 4,
1641 .svhs = NO_SVHS,
1642 .muxsel = MUXSEL(2, 3, 1, 0),
1643 .pll = PLL_28,
1644 .tuner_type = UNSET,
1645 .tuner_addr = ADDR_UNSET,
1646 },
1647
1648 /* ---- card 0x50 ---------------------------------- */
1649 [BTTV_BOARD_HAUPPAUGEPVR] = {
1650 .name = "Hauppauge WinTV PVR",
1651 .video_inputs = 4,
1652 /* .audio_inputs= 1, */
1653 .svhs = 2,
1654 .muxsel = MUXSEL(2, 0, 1, 1),
1655 .needs_tvaudio = 1,
1656 .pll = PLL_28,
1657 .tuner_type = UNSET,
1658 .tuner_addr = ADDR_UNSET,
1659
1660 .gpiomask = 7,
1661 .gpiomux = {7},
1662 },
1663 [BTTV_BOARD_GVBCTV5PCI] = {
1664 .name = "IODATA GV-BCTV5/PCI",
1665 .video_inputs = 3,
1666 /* .audio_inputs= 1, */
1667 .svhs = 2,
1668 .gpiomask = 0x0f0f80,
1669 .muxsel = MUXSEL(2, 3, 1, 0),
1670 .gpiomux = {0x030000, 0x010000, 0, 0 },
1671 .gpiomute = 0x020000,
1672 .no_msp34xx = 1,
1673 .pll = PLL_28,
1674 .tuner_type = TUNER_PHILIPS_NTSC_M,
1675 .tuner_addr = ADDR_UNSET,
1676 .audio_mode_gpio= gvbctv5pci_audio,
1677 .has_radio = 1,
1678 },
1679 [BTTV_BOARD_OSPREY1x0] = {
1680 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1681 .video_inputs = 4, /* id-inputs-clock */
1682 /* .audio_inputs= 0, */
1683 .svhs = 3,
1684 .muxsel = MUXSEL(3, 2, 0, 1),
1685 .pll = PLL_28,
1686 .tuner_type = TUNER_ABSENT,
1687 .tuner_addr = ADDR_UNSET,
1688 .no_msp34xx = 1,
1689 .no_tda9875 = 1,
1690 .no_tda7432 = 1,
1691 },
1692 [BTTV_BOARD_OSPREY1x0_848] = {
1693 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1694 .video_inputs = 3,
1695 /* .audio_inputs= 0, */
1696 .svhs = 2,
1697 .muxsel = MUXSEL(2, 3, 1),
1698 .pll = PLL_28,
1699 .tuner_type = TUNER_ABSENT,
1700 .tuner_addr = ADDR_UNSET,
1701 .no_msp34xx = 1,
1702 .no_tda9875 = 1,
1703 .no_tda7432 = 1,
1704 },
1705
1706 /* ---- card 0x54 ---------------------------------- */
1707 [BTTV_BOARD_OSPREY101_848] = {
1708 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1709 .video_inputs = 2,
1710 /* .audio_inputs= 0, */
1711 .svhs = 1,
1712 .muxsel = MUXSEL(3, 1),
1713 .pll = PLL_28,
1714 .tuner_type = TUNER_ABSENT,
1715 .tuner_addr = ADDR_UNSET,
1716 .no_msp34xx = 1,
1717 .no_tda9875 = 1,
1718 .no_tda7432 = 1,
1719 },
1720 [BTTV_BOARD_OSPREY1x1] = {
1721 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
1722 .video_inputs = 1,
1723 /* .audio_inputs= 0, */
1724 .svhs = NO_SVHS,
1725 .muxsel = MUXSEL(0),
1726 .pll = PLL_28,
1727 .tuner_type = TUNER_ABSENT,
1728 .tuner_addr = ADDR_UNSET,
1729 .no_msp34xx = 1,
1730 .no_tda9875 = 1,
1731 .no_tda7432 = 1,
1732 },
1733 [BTTV_BOARD_OSPREY1x1_SVID] = {
1734 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
1735 .video_inputs = 2,
1736 /* .audio_inputs= 0, */
1737 .svhs = 1,
1738 .muxsel = MUXSEL(0, 1),
1739 .pll = PLL_28,
1740 .tuner_type = TUNER_ABSENT,
1741 .tuner_addr = ADDR_UNSET,
1742 .no_msp34xx = 1,
1743 .no_tda9875 = 1,
1744 .no_tda7432 = 1,
1745 },
1746 [BTTV_BOARD_OSPREY2xx] = {
1747 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
1748 .video_inputs = 1,
1749 /* .audio_inputs= 1, */
1750 .svhs = NO_SVHS,
1751 .muxsel = MUXSEL(0),
1752 .pll = PLL_28,
1753 .tuner_type = TUNER_ABSENT,
1754 .tuner_addr = ADDR_UNSET,
1755 .no_msp34xx = 1,
1756 .no_tda9875 = 1,
1757 .no_tda7432 = 1,
1758 },
1759
1760 /* ---- card 0x58 ---------------------------------- */
1761 [BTTV_BOARD_OSPREY2x0_SVID] = {
1762 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
1763 .video_inputs = 2,
1764 /* .audio_inputs= 1, */
1765 .svhs = 1,
1766 .muxsel = MUXSEL(0, 1),
1767 .pll = PLL_28,
1768 .tuner_type = TUNER_ABSENT,
1769 .tuner_addr = ADDR_UNSET,
1770 .no_msp34xx = 1,
1771 .no_tda9875 = 1,
1772 .no_tda7432 = 1,
1773 },
1774 [BTTV_BOARD_OSPREY2x0] = {
1775 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
1776 .video_inputs = 2,
1777 /* .audio_inputs= 1, */
1778 .svhs = 1,
1779 .muxsel = MUXSEL(2, 3),
1780 .pll = PLL_28,
1781 .tuner_type = TUNER_ABSENT,
1782 .tuner_addr = ADDR_UNSET,
1783 .no_msp34xx = 1,
1784 .no_tda9875 = 1,
1785 .no_tda7432 = 1,
1786 },
1787 [BTTV_BOARD_OSPREY500] = {
1788 .name = "Osprey 500", /* 500 */
1789 .video_inputs = 2,
1790 /* .audio_inputs= 1, */
1791 .svhs = 1,
1792 .muxsel = MUXSEL(2, 3),
1793 .pll = PLL_28,
1794 .tuner_type = TUNER_ABSENT,
1795 .tuner_addr = ADDR_UNSET,
1796 .no_msp34xx = 1,
1797 .no_tda9875 = 1,
1798 .no_tda7432 = 1,
1799 },
1800 [BTTV_BOARD_OSPREY540] = {
1801 .name = "Osprey 540", /* 540 */
1802 .video_inputs = 4,
1803 /* .audio_inputs= 1, */
1804 .pll = PLL_28,
1805 .tuner_type = TUNER_ABSENT,
1806 .tuner_addr = ADDR_UNSET,
1807 .no_msp34xx = 1,
1808 .no_tda9875 = 1,
1809 .no_tda7432 = 1,
1810 },
1811
1812 /* ---- card 0x5C ---------------------------------- */
1813 [BTTV_BOARD_OSPREY2000] = {
1814 .name = "Osprey 2000", /* 2000 */
1815 .video_inputs = 2,
1816 /* .audio_inputs= 1, */
1817 .svhs = 1,
1818 .muxsel = MUXSEL(2, 3),
1819 .pll = PLL_28,
1820 .tuner_type = TUNER_ABSENT,
1821 .tuner_addr = ADDR_UNSET,
1822 .no_msp34xx = 1,
1823 .no_tda9875 = 1,
1824 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
1825 },
1826 [BTTV_BOARD_IDS_EAGLE] = {
1827 /* M G Berberich <berberic@forwiss.uni-passau.de> */
1828 .name = "IDS Eagle",
1829 .video_inputs = 4,
1830 /* .audio_inputs= 0, */
1831 .tuner_type = TUNER_ABSENT,
1832 .tuner_addr = ADDR_UNSET,
1833 .svhs = NO_SVHS,
1834 .gpiomask = 0,
1835 .muxsel = MUXSEL(2, 2, 2, 2),
1836 .muxsel_hook = eagle_muxsel,
1837 .no_msp34xx = 1,
1838 .no_tda9875 = 1,
1839 .pll = PLL_28,
1840 },
1841 [BTTV_BOARD_PINNACLESAT] = {
1842 .name = "Pinnacle PCTV Sat",
1843 .video_inputs = 2,
1844 /* .audio_inputs= 0, */
1845 .svhs = 1,
1846 .tuner_type = TUNER_ABSENT,
1847 .tuner_addr = ADDR_UNSET,
1848 .no_msp34xx = 1,
1849 .no_tda9875 = 1,
1850 .no_tda7432 = 1,
1851 .muxsel = MUXSEL(3, 1),
1852 .pll = PLL_28,
1853 .no_gpioirq = 1,
1854 .has_dvb = 1,
1855 },
1856 [BTTV_BOARD_FORMAC_PROTV] = {
1857 .name = "Formac ProTV II (bt878)",
1858 .video_inputs = 4,
1859 /* .audio_inputs= 1, */
1860 .svhs = 3,
1861 .gpiomask = 2,
1862 /* TV, Comp1, Composite over SVID con, SVID */
1863 .muxsel = MUXSEL(2, 3, 1, 1),
1864 .gpiomux = { 2, 2, 0, 0 },
1865 .pll = PLL_28,
1866 .has_radio = 1,
1867 .tuner_type = TUNER_PHILIPS_PAL,
1868 .tuner_addr = ADDR_UNSET,
1869 /* sound routing:
1870 GPIO=0x00,0x01,0x03: mute (?)
1871 0x02: both TV and radio (tuner: FM1216/I)
1872 The card has onboard audio connectors labeled "cdrom" and "board",
1873 not soldered here, though unknown wiring.
1874 Card lacks: external audio in, pci subsystem id.
1875 */
1876 },
1877
1878 /* ---- card 0x60 ---------------------------------- */
1879 [BTTV_BOARD_MACHTV] = {
1880 .name = "MachTV",
1881 .video_inputs = 3,
1882 /* .audio_inputs= 1, */
1883 .svhs = NO_SVHS,
1884 .gpiomask = 7,
1885 .muxsel = MUXSEL(2, 3, 1, 1),
1886 .gpiomux = { 0, 1, 2, 3},
1887 .gpiomute = 4,
1888 .needs_tvaudio = 1,
1889 .tuner_type = TUNER_PHILIPS_PAL,
1890 .tuner_addr = ADDR_UNSET,
1891 .pll = PLL_28,
1892 },
1893 [BTTV_BOARD_EURESYS_PICOLO] = {
1894 .name = "Euresys Picolo",
1895 .video_inputs = 3,
1896 /* .audio_inputs= 0, */
1897 .svhs = 2,
1898 .gpiomask = 0,
1899 .no_msp34xx = 1,
1900 .no_tda9875 = 1,
1901 .no_tda7432 = 1,
1902 .muxsel = MUXSEL(2, 0, 1),
1903 .pll = PLL_28,
1904 .tuner_type = TUNER_ABSENT,
1905 .tuner_addr = ADDR_UNSET,
1906 },
1907 [BTTV_BOARD_PV150] = {
1908 /* Luc Van Hoeylandt <luc@e-magic.be> */
1909 .name = "ProVideo PV150", /* 0x4f */
1910 .video_inputs = 2,
1911 /* .audio_inputs= 0, */
1912 .svhs = NO_SVHS,
1913 .gpiomask = 0,
1914 .muxsel = MUXSEL(2, 3),
1915 .gpiomux = { 0 },
1916 .needs_tvaudio = 0,
1917 .no_msp34xx = 1,
1918 .pll = PLL_28,
1919 .tuner_type = TUNER_ABSENT,
1920 .tuner_addr = ADDR_UNSET,
1921 },
1922 [BTTV_BOARD_AD_TVK503] = {
1923 /* Hiroshi Takekawa <sian@big.or.jp> */
1924 /* This card lacks subsystem ID */
1925 .name = "AD-TVK503", /* 0x63 */
1926 .video_inputs = 4,
1927 /* .audio_inputs= 1, */
1928 .svhs = 2,
1929 .gpiomask = 0x001e8007,
1930 .muxsel = MUXSEL(2, 3, 1, 0),
1931 /* Tuner, Radio, external, internal, off, on */
1932 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
1933 .gpiomute = 0x0f,
1934 .needs_tvaudio = 0,
1935 .no_msp34xx = 1,
1936 .pll = PLL_28,
1937 .tuner_type = TUNER_PHILIPS_NTSC,
1938 .tuner_addr = ADDR_UNSET,
1939 .audio_mode_gpio= adtvk503_audio,
1940 },
1941
1942 /* ---- card 0x64 ---------------------------------- */
1943 [BTTV_BOARD_HERCULES_SM_TV] = {
1944 .name = "Hercules Smart TV Stereo",
1945 .video_inputs = 4,
1946 /* .audio_inputs= 1, */
1947 .svhs = 2,
1948 .gpiomask = 0x00,
1949 .muxsel = MUXSEL(2, 3, 1, 1),
1950 .needs_tvaudio = 1,
1951 .no_msp34xx = 1,
1952 .pll = PLL_28,
1953 .tuner_type = TUNER_PHILIPS_PAL,
1954 .tuner_addr = ADDR_UNSET,
1955 /* Notes:
1956 - card lacks subsystem ID
1957 - stereo variant w/ daughter board with tda9874a @0xb0
1958 - Audio Routing:
1959 always from tda9874 independent of GPIO (?)
1960 external line in: unknown
1961 - Other chips: em78p156elp @ 0x96 (probably IR remote control)
1962 hef4053 (instead 4052) for unknown function
1963 */
1964 },
1965 [BTTV_BOARD_PACETV] = {
1966 .name = "Pace TV & Radio Card",
1967 .video_inputs = 4,
1968 /* .audio_inputs= 1, */
1969 .svhs = 2,
1970 /* Tuner, CVid, SVid, CVid over SVid connector */
1971 .muxsel = MUXSEL(2, 3, 1, 1),
1972 .gpiomask = 0,
1973 .no_tda9875 = 1,
1974 .no_tda7432 = 1,
1975 .tuner_type = TUNER_PHILIPS_PAL_I,
1976 .tuner_addr = ADDR_UNSET,
1977 .has_radio = 1,
1978 .pll = PLL_28,
1979 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1980 only internal line out: (4pin header) RGGL
1981 Radio must be decoded by msp3410d (not routed through)*/
1982 /*
1983 .digital_mode = DIGITAL_MODE_CAMERA, todo!
1984 */
1985 },
1986 [BTTV_BOARD_IVC200] = {
1987 /* Chris Willing <chris@vislab.usyd.edu.au> */
1988 .name = "IVC-200",
1989 .video_inputs = 1,
1990 /* .audio_inputs= 0, */
1991 .tuner_type = TUNER_ABSENT,
1992 .tuner_addr = ADDR_UNSET,
1993 .svhs = NO_SVHS,
1994 .gpiomask = 0xdf,
1995 .muxsel = MUXSEL(2),
1996 .pll = PLL_28,
1997 },
1998 [BTTV_BOARD_IVCE8784] = {
1999 .name = "IVCE-8784",
2000 .video_inputs = 1,
2001 /* .audio_inputs= 0, */
2002 .tuner_type = TUNER_ABSENT,
2003 .tuner_addr = ADDR_UNSET,
2004 .svhs = NO_SVHS,
2005 .gpiomask = 0xdf,
2006 .muxsel = MUXSEL(2),
2007 .pll = PLL_28,
2008 },
2009 [BTTV_BOARD_XGUARD] = {
2010 .name = "Grand X-Guard / Trust 814PCI",
2011 .video_inputs = 16,
2012 /* .audio_inputs= 0, */
2013 .svhs = NO_SVHS,
2014 .tuner_type = TUNER_ABSENT,
2015 .tuner_addr = ADDR_UNSET,
2016 .gpiomask2 = 0xff,
2017 .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
2018 .muxsel_hook = xguard_muxsel,
2019 .no_msp34xx = 1,
2020 .no_tda9875 = 1,
2021 .no_tda7432 = 1,
2022 .pll = PLL_28,
2023 },
2024
2025 /* ---- card 0x68 ---------------------------------- */
2026 [BTTV_BOARD_NEBULA_DIGITV] = {
2027 .name = "Nebula Electronics DigiTV",
2028 .video_inputs = 1,
2029 .svhs = NO_SVHS,
2030 .muxsel = MUXSEL(2, 3, 1, 0),
2031 .no_msp34xx = 1,
2032 .no_tda9875 = 1,
2033 .no_tda7432 = 1,
2034 .pll = PLL_28,
2035 .tuner_type = TUNER_ABSENT,
2036 .tuner_addr = ADDR_UNSET,
2037 .has_dvb = 1,
2038 .has_remote = 1,
2039 .gpiomask = 0x1b,
2040 .no_gpioirq = 1,
2041 },
2042 [BTTV_BOARD_PV143] = {
2043 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */
2044 .name = "ProVideo PV143",
2045 .video_inputs = 4,
2046 /* .audio_inputs= 0, */
2047 .svhs = NO_SVHS,
2048 .gpiomask = 0,
2049 .muxsel = MUXSEL(2, 3, 1, 0),
2050 .gpiomux = { 0 },
2051 .needs_tvaudio = 0,
2052 .no_msp34xx = 1,
2053 .pll = PLL_28,
2054 .tuner_type = TUNER_ABSENT,
2055 .tuner_addr = ADDR_UNSET,
2056 },
2057 [BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
2058 /* M.Klahr@phytec.de */
2059 .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
2060 .video_inputs = 4,
2061 /* .audio_inputs= 0, */
2062 .svhs = 3,
2063 .gpiomask = 0x00,
2064 .muxsel = MUXSEL(2, 3, 1, 0),
2065 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2066 .needs_tvaudio = 0,
2067 .pll = PLL_28,
2068 .tuner_type = TUNER_ABSENT,
2069 .tuner_addr = ADDR_UNSET,
2070 },
2071 [BTTV_BOARD_VD009X1_VD011_COMBI] = {
2072 .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
2073 .video_inputs = 4,
2074 /* .audio_inputs= 0, */
2075 .svhs = 3,
2076 .gpiomask = 0x00,
2077 .muxsel = MUXSEL(2, 3, 1, 1),
2078 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2079 .needs_tvaudio = 0,
2080 .pll = PLL_28,
2081 .tuner_type = TUNER_ABSENT,
2082 .tuner_addr = ADDR_UNSET,
2083 },
2084
2085 /* ---- card 0x6c ---------------------------------- */
2086 [BTTV_BOARD_VD009_MINIDIN] = {
2087 .name = "PHYTEC VD-009 MiniDIN (bt878)",
2088 .video_inputs = 10,
2089 /* .audio_inputs= 0, */
2090 .svhs = 9,
2091 .gpiomask = 0x00,
2092 .gpiomask2 = 0x03, /* used for external vodeo mux */
2093 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2094 .muxsel_hook = phytec_muxsel,
2095 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2096 .needs_tvaudio = 1,
2097 .pll = PLL_28,
2098 .tuner_type = TUNER_ABSENT,
2099 .tuner_addr = ADDR_UNSET,
2100 },
2101 [BTTV_BOARD_VD009_COMBI] = {
2102 .name = "PHYTEC VD-009 Combi (bt878)",
2103 .video_inputs = 10,
2104 /* .audio_inputs= 0, */
2105 .svhs = 9,
2106 .gpiomask = 0x00,
2107 .gpiomask2 = 0x03, /* used for external vodeo mux */
2108 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2109 .muxsel_hook = phytec_muxsel,
2110 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2111 .needs_tvaudio = 1,
2112 .pll = PLL_28,
2113 .tuner_type = TUNER_ABSENT,
2114 .tuner_addr = ADDR_UNSET,
2115 },
2116 [BTTV_BOARD_IVC100] = {
2117 .name = "IVC-100",
2118 .video_inputs = 4,
2119 /* .audio_inputs= 0, */
2120 .tuner_type = TUNER_ABSENT,
2121 .tuner_addr = ADDR_UNSET,
2122 .svhs = NO_SVHS,
2123 .gpiomask = 0xdf,
2124 .muxsel = MUXSEL(2, 3, 1, 0),
2125 .pll = PLL_28,
2126 },
2127 [BTTV_BOARD_IVC120] = {
2128 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2129 .name = "IVC-120G",
2130 .video_inputs = 16,
2131 /* .audio_inputs= 0, */
2132 .tuner_type = TUNER_ABSENT,
2133 .tuner_addr = ADDR_UNSET,
2134 .svhs = NO_SVHS, /* card has no svhs */
2135 .needs_tvaudio = 0,
2136 .no_msp34xx = 1,
2137 .no_tda9875 = 1,
2138 .no_tda7432 = 1,
2139 .gpiomask = 0x00,
2140 .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2141 .muxsel_hook = ivc120_muxsel,
2142 .pll = PLL_28,
2143 },
2144
2145 /* ---- card 0x70 ---------------------------------- */
2146 [BTTV_BOARD_PC_HDTV] = {
2147 .name = "pcHDTV HD-2000 TV",
2148 .video_inputs = 4,
2149 /* .audio_inputs= 1, */
2150 .svhs = 2,
2151 .muxsel = MUXSEL(2, 3, 1, 0),
2152 .tuner_type = TUNER_PHILIPS_FCV1236D,
2153 .tuner_addr = ADDR_UNSET,
2154 .has_dvb = 1,
2155 },
2156 [BTTV_BOARD_TWINHAN_DST] = {
2157 .name = "Twinhan DST + clones",
2158 .no_msp34xx = 1,
2159 .no_tda9875 = 1,
2160 .no_tda7432 = 1,
2161 .tuner_type = TUNER_ABSENT,
2162 .tuner_addr = ADDR_UNSET,
2163 .no_video = 1,
2164 .has_dvb = 1,
2165 },
2166 [BTTV_BOARD_WINFASTVC100] = {
2167 .name = "Winfast VC100",
2168 .video_inputs = 3,
2169 /* .audio_inputs= 0, */
2170 .svhs = 1,
2171 /* Vid In, SVid In, Vid over SVid in connector */
2172 .muxsel = MUXSEL(3, 1, 1, 3),
2173 .no_msp34xx = 1,
2174 .no_tda9875 = 1,
2175 .no_tda7432 = 1,
2176 .tuner_type = TUNER_ABSENT,
2177 .tuner_addr = ADDR_UNSET,
2178 .pll = PLL_28,
2179 },
2180 [BTTV_BOARD_TEV560] = {
2181 .name = "Teppro TEV-560/InterVision IV-560",
2182 .video_inputs = 3,
2183 /* .audio_inputs= 1, */
2184 .svhs = 2,
2185 .gpiomask = 3,
2186 .muxsel = MUXSEL(2, 3, 1, 1),
2187 .gpiomux = { 1, 1, 1, 1 },
2188 .needs_tvaudio = 1,
2189 .tuner_type = TUNER_PHILIPS_PAL,
2190 .tuner_addr = ADDR_UNSET,
2191 .pll = PLL_35,
2192 },
2193
2194 /* ---- card 0x74 ---------------------------------- */
2195 [BTTV_BOARD_SIMUS_GVC1100] = {
2196 .name = "SIMUS GVC1100",
2197 .video_inputs = 4,
2198 /* .audio_inputs= 0, */
2199 .svhs = NO_SVHS,
2200 .tuner_type = TUNER_ABSENT,
2201 .tuner_addr = ADDR_UNSET,
2202 .pll = PLL_28,
2203 .muxsel = MUXSEL(2, 2, 2, 2),
2204 .gpiomask = 0x3F,
2205 .muxsel_hook = gvc1100_muxsel,
2206 },
2207 [BTTV_BOARD_NGSTV_PLUS] = {
2208 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2209 .name = "NGS NGSTV+",
2210 .video_inputs = 3,
2211 .svhs = 2,
2212 .gpiomask = 0x008007,
2213 .muxsel = MUXSEL(2, 3, 0, 0),
2214 .gpiomux = { 0, 0, 0, 0 },
2215 .gpiomute = 0x000003,
2216 .pll = PLL_28,
2217 .tuner_type = TUNER_PHILIPS_PAL,
2218 .tuner_addr = ADDR_UNSET,
2219 .has_remote = 1,
2220 },
2221 [BTTV_BOARD_LMLBT4] = {
2222 /* http://linuxmedialabs.com */
2223 .name = "LMLBT4",
2224 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
2225 /* .audio_inputs= 0, */
2226 .svhs = NO_SVHS,
2227 .muxsel = MUXSEL(2, 3, 1, 0),
2228 .no_msp34xx = 1,
2229 .no_tda9875 = 1,
2230 .no_tda7432 = 1,
2231 .needs_tvaudio = 0,
2232 .tuner_type = TUNER_ABSENT,
2233 .tuner_addr = ADDR_UNSET,
2234 },
2235 [BTTV_BOARD_TEKRAM_M205] = {
2236 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2237 .name = "Tekram M205 PRO",
2238 .video_inputs = 3,
2239 /* .audio_inputs= 1, */
2240 .tuner_type = TUNER_PHILIPS_PAL,
2241 .tuner_addr = ADDR_UNSET,
2242 .svhs = 2,
2243 .needs_tvaudio = 0,
2244 .gpiomask = 0x68,
2245 .muxsel = MUXSEL(2, 3, 1),
2246 .gpiomux = { 0x68, 0x68, 0x61, 0x61 },
2247 .pll = PLL_28,
2248 },
2249
2250 /* ---- card 0x78 ---------------------------------- */
2251 [BTTV_BOARD_CONTVFMI] = {
2252 /* Javier Cendan Ares <jcendan@lycos.es> */
2253 /* bt878 TV + FM without subsystem ID */
2254 .name = "Conceptronic CONTVFMi",
2255 .video_inputs = 3,
2256 /* .audio_inputs= 1, */
2257 .svhs = 2,
2258 .gpiomask = 0x008007,
2259 .muxsel = MUXSEL(2, 3, 1, 1),
2260 .gpiomux = { 0, 1, 2, 2 },
2261 .gpiomute = 3,
2262 .needs_tvaudio = 0,
2263 .pll = PLL_28,
2264 .tuner_type = TUNER_PHILIPS_PAL,
2265 .tuner_addr = ADDR_UNSET,
2266 .has_remote = 1,
2267 .has_radio = 1,
2268 },
2269 [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2270 /*Eric DEBIEF <debief@telemsa.com>*/
2271 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
2272 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2273 /*0x79 in bttv.h*/
2274 .name = "Euresys Picolo Tetra",
2275 .video_inputs = 4,
2276 /* .audio_inputs= 0, */
2277 .svhs = NO_SVHS,
2278 .gpiomask = 0,
2279 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2280 .no_msp34xx = 1,
2281 .no_tda9875 = 1,
2282 .no_tda7432 = 1,
2283 /*878A input is always MUX0, see above.*/
2284 .muxsel = MUXSEL(2, 2, 2, 2),
2285 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2286 .pll = PLL_28,
2287 .needs_tvaudio = 0,
2288 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2289 .tuner_type = TUNER_ABSENT,
2290 .tuner_addr = ADDR_UNSET,
2291 },
2292 [BTTV_BOARD_SPIRIT_TV] = {
2293 /* Spirit TV Tuner from http://spiritmodems.com.au */
2294 /* Stafford Goodsell <surge@goliath.homeunix.org> */
2295 .name = "Spirit TV Tuner",
2296 .video_inputs = 3,
2297 /* .audio_inputs= 1, */
2298 .svhs = 2,
2299 .gpiomask = 0x0000000f,
2300 .muxsel = MUXSEL(2, 1, 1),
2301 .gpiomux = { 0x02, 0x00, 0x00, 0x00 },
2302 .tuner_type = TUNER_TEMIC_PAL,
2303 .tuner_addr = ADDR_UNSET,
2304 .no_msp34xx = 1,
2305 .no_tda9875 = 1,
2306 },
2307 [BTTV_BOARD_AVDVBT_771] = {
2308 /* Wolfram Joost <wojo@frokaschwei.de> */
2309 .name = "AVerMedia AVerTV DVB-T 771",
2310 .video_inputs = 2,
2311 .svhs = 1,
2312 .tuner_type = TUNER_ABSENT,
2313 .tuner_addr = ADDR_UNSET,
2314 .muxsel = MUXSEL(3, 3),
2315 .no_msp34xx = 1,
2316 .no_tda9875 = 1,
2317 .no_tda7432 = 1,
2318 .pll = PLL_28,
2319 .has_dvb = 1,
2320 .no_gpioirq = 1,
2321 .has_remote = 1,
2322 },
2323 /* ---- card 0x7c ---------------------------------- */
2324 [BTTV_BOARD_AVDVBT_761] = {
2325 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2326 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2327 .name = "AverMedia AverTV DVB-T 761",
2328 .video_inputs = 2,
2329 .svhs = 1,
2330 .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2331 .no_msp34xx = 1,
2332 .no_tda9875 = 1,
2333 .no_tda7432 = 1,
2334 .pll = PLL_28,
2335 .tuner_type = TUNER_ABSENT,
2336 .tuner_addr = ADDR_UNSET,
2337 .has_dvb = 1,
2338 .no_gpioirq = 1,
2339 .has_remote = 1,
2340 },
2341 [BTTV_BOARD_MATRIX_VISIONSQ] = {
2342 /* andre.schwarz@matrix-vision.de */
2343 .name = "MATRIX Vision Sigma-SQ",
2344 .video_inputs = 16,
2345 /* .audio_inputs= 0, */
2346 .svhs = NO_SVHS,
2347 .gpiomask = 0x0,
2348 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2349 .muxsel_hook = sigmaSQ_muxsel,
2350 .gpiomux = { 0 },
2351 .no_msp34xx = 1,
2352 .pll = PLL_28,
2353 .tuner_type = TUNER_ABSENT,
2354 .tuner_addr = ADDR_UNSET,
2355 },
2356 [BTTV_BOARD_MATRIX_VISIONSLC] = {
2357 /* andre.schwarz@matrix-vision.de */
2358 .name = "MATRIX Vision Sigma-SLC",
2359 .video_inputs = 4,
2360 /* .audio_inputs= 0, */
2361 .svhs = NO_SVHS,
2362 .gpiomask = 0x0,
2363 .muxsel = MUXSEL(2, 2, 2, 2),
2364 .muxsel_hook = sigmaSLC_muxsel,
2365 .gpiomux = { 0 },
2366 .no_msp34xx = 1,
2367 .pll = PLL_28,
2368 .tuner_type = TUNER_ABSENT,
2369 .tuner_addr = ADDR_UNSET,
2370 },
2371 /* BTTV_BOARD_APAC_VIEWCOMP */
2372 [BTTV_BOARD_APAC_VIEWCOMP] = {
2373 /* Attila Kondoros <attila.kondoros@chello.hu> */
2374 /* bt878 TV + FM 0x00000000 subsystem ID */
2375 .name = "APAC Viewcomp 878(AMAX)",
2376 .video_inputs = 2,
2377 /* .audio_inputs= 1, */
2378 .svhs = NO_SVHS,
2379 .gpiomask = 0xFF,
2380 .muxsel = MUXSEL(2, 3, 1, 1),
2381 .gpiomux = { 2, 0, 0, 0 },
2382 .gpiomute = 10,
2383 .needs_tvaudio = 0,
2384 .pll = PLL_28,
2385 .tuner_type = TUNER_PHILIPS_PAL,
2386 .tuner_addr = ADDR_UNSET,
2387 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
2388 .has_radio = 1, /* not every card has radio */
2389 },
2390
2391 /* ---- card 0x80 ---------------------------------- */
2392 [BTTV_BOARD_DVICO_DVBT_LITE] = {
2393 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2394 .name = "DViCO FusionHDTV DVB-T Lite",
2395 .no_msp34xx = 1,
2396 .no_tda9875 = 1,
2397 .no_tda7432 = 1,
2398 .pll = PLL_28,
2399 .no_video = 1,
2400 .has_dvb = 1,
2401 .tuner_type = TUNER_ABSENT,
2402 .tuner_addr = ADDR_UNSET,
2403 },
2404 [BTTV_BOARD_VGEAR_MYVCD] = {
2405 /* Steven <photon38@pchome.com.tw> */
2406 .name = "V-Gear MyVCD",
2407 .video_inputs = 3,
2408 /* .audio_inputs= 1, */
2409 .svhs = 2,
2410 .gpiomask = 0x3f,
2411 .muxsel = MUXSEL(2, 3, 1, 0),
2412 .gpiomux = {0x31, 0x31, 0x31, 0x31 },
2413 .gpiomute = 0x31,
2414 .no_msp34xx = 1,
2415 .pll = PLL_28,
2416 .tuner_type = TUNER_PHILIPS_NTSC_M,
2417 .tuner_addr = ADDR_UNSET,
2418 .has_radio = 0,
2419 },
2420 [BTTV_BOARD_SUPER_TV] = {
2421 /* Rick C <cryptdragoon@gmail.com> */
2422 .name = "Super TV Tuner",
2423 .video_inputs = 4,
2424 /* .audio_inputs= 1, */
2425 .svhs = 2,
2426 .muxsel = MUXSEL(2, 3, 1, 0),
2427 .tuner_type = TUNER_PHILIPS_NTSC,
2428 .tuner_addr = ADDR_UNSET,
2429 .gpiomask = 0x008007,
2430 .gpiomux = { 0, 0x000001,0,0 },
2431 .needs_tvaudio = 1,
2432 .has_radio = 1,
2433 },
2434 [BTTV_BOARD_TIBET_CS16] = {
2435 /* Chris Fanning <video4linux@haydon.net> */
2436 .name = "Tibet Systems 'Progress DVR' CS16",
2437 .video_inputs = 16,
2438 /* .audio_inputs= 0, */
2439 .svhs = NO_SVHS,
2440 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2441 .pll = PLL_28,
2442 .no_msp34xx = 1,
2443 .no_tda9875 = 1,
2444 .no_tda7432 = 1,
2445 .tuner_type = TUNER_ABSENT,
2446 .tuner_addr = ADDR_UNSET,
2447 .muxsel_hook = tibetCS16_muxsel,
2448 },
2449 [BTTV_BOARD_KODICOM_4400R] = {
2450 /* Bill Brack <wbrack@mmm.com.hk> */
2451 /*
2452 * Note that, because of the card's wiring, the "master"
2453 * BT878A chip (i.e. the one which controls the analog switch
2454 * and must use this card type) is the 2nd one detected. The
2455 * other 3 chips should use card type 0x85, whose description
2456 * follows this one. There is a EEPROM on the card (which is
2457 * connected to the I2C of one of those other chips), but is
2458 * not currently handled. There is also a facility for a
2459 * "monitor", which is also not currently implemented.
2460 */
2461 .name = "Kodicom 4400R (master)",
2462 .video_inputs = 16,
2463 /* .audio_inputs= 0, */
2464 .tuner_type = TUNER_ABSENT,
2465 .tuner_addr = ADDR_UNSET,
2466 .svhs = NO_SVHS,
2467 /* GPIO bits 0-9 used for analog switch:
2468 * 00 - 03: camera selector
2469 * 04 - 06: channel (controller) selector
2470 * 07: data (1->on, 0->off)
2471 * 08: strobe
2472 * 09: reset
2473 * bit 16 is input from sync separator for the channel
2474 */
2475 .gpiomask = 0x0003ff,
2476 .no_gpioirq = 1,
2477 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2478 .pll = PLL_28,
2479 .no_msp34xx = 1,
2480 .no_tda7432 = 1,
2481 .no_tda9875 = 1,
2482 .muxsel_hook = kodicom4400r_muxsel,
2483 },
2484 [BTTV_BOARD_KODICOM_4400R_SL] = {
2485 /* Bill Brack <wbrack@mmm.com.hk> */
2486 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2487 * one which controls the analog switch, and must use the card type)
2488 * is the 2nd one detected. The other 3 chips should use this card
2489 * type
2490 */
2491 .name = "Kodicom 4400R (slave)",
2492 .video_inputs = 16,
2493 /* .audio_inputs= 0, */
2494 .tuner_type = TUNER_ABSENT,
2495 .tuner_addr = ADDR_UNSET,
2496 .svhs = NO_SVHS,
2497 .gpiomask = 0x010000,
2498 .no_gpioirq = 1,
2499 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2500 .pll = PLL_28,
2501 .no_msp34xx = 1,
2502 .no_tda7432 = 1,
2503 .no_tda9875 = 1,
2504 .muxsel_hook = kodicom4400r_muxsel,
2505 },
2506 /* ---- card 0x86---------------------------------- */
2507 [BTTV_BOARD_ADLINK_RTV24] = {
2508 /* Michael Henson <mhenson@clarityvi.com> */
2509 /* Adlink RTV24 with special unlock codes */
2510 .name = "Adlink RTV24",
2511 .video_inputs = 4,
2512 /* .audio_inputs= 1, */
2513 .svhs = 2,
2514 .muxsel = MUXSEL(2, 3, 1, 0),
2515 .tuner_type = UNSET,
2516 .tuner_addr = ADDR_UNSET,
2517 .pll = PLL_28,
2518 },
2519 /* ---- card 0x87---------------------------------- */
2520 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2521 /* Michael Krufky <mkrufky@m1k.net> */
2522 .name = "DViCO FusionHDTV 5 Lite",
2523 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2524 .tuner_addr = ADDR_UNSET,
2525 .video_inputs = 3,
2526 /* .audio_inputs= 1, */
2527 .svhs = 2,
2528 .muxsel = MUXSEL(2, 3, 1),
2529 .gpiomask = 0x00e00007,
2530 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2531 .gpiomute = 0x00c00007,
2532 .no_msp34xx = 1,
2533 .no_tda9875 = 1,
2534 .no_tda7432 = 1,
2535 .has_dvb = 1,
2536 },
2537 /* ---- card 0x88---------------------------------- */
2538 [BTTV_BOARD_ACORP_Y878F] = {
2539 /* Mauro Carvalho Chehab <mchehab@infradead.org> */
2540 .name = "Acorp Y878F",
2541 .video_inputs = 3,
2542 /* .audio_inputs= 1, */
2543 .svhs = 2,
2544 .gpiomask = 0x01fe00,
2545 .muxsel = MUXSEL(2, 3, 1, 1),
2546 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
2547 .gpiomute = 0x002000,
2548 .needs_tvaudio = 1,
2549 .pll = PLL_28,
2550 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
2551 .tuner_addr = 0xc1 >>1,
2552 .has_radio = 1,
2553 },
2554 /* ---- card 0x89 ---------------------------------- */
2555 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2556 .name = "Conceptronic CTVFMi v2",
2557 .video_inputs = 3,
2558 /* .audio_inputs= 1, */
2559 .svhs = 2,
2560 .gpiomask = 0x001c0007,
2561 .muxsel = MUXSEL(2, 3, 1, 1),
2562 .gpiomux = { 0, 1, 2, 2 },
2563 .gpiomute = 3,
2564 .needs_tvaudio = 0,
2565 .pll = PLL_28,
2566 .tuner_type = TUNER_TENA_9533_DI,
2567 .tuner_addr = ADDR_UNSET,
2568 .has_remote = 1,
2569 .has_radio = 1,
2570 },
2571 /* ---- card 0x8a ---------------------------------- */
2572 [BTTV_BOARD_PV_BT878P_2E] = {
2573 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2574 .video_inputs = 5,
2575 /* .audio_inputs= 1, */
2576 .svhs = 3,
2577 .has_dig_in = 1,
2578 .gpiomask = 0x01fe00,
2579 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2580 /* .digital_mode= DIGITAL_MODE_CAMERA, */
2581 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
2582 .gpiomute = 0x12400,
2583 .no_msp34xx = 1,
2584 .pll = PLL_28,
2585 .tuner_type = TUNER_LG_PAL_FM,
2586 .tuner_addr = ADDR_UNSET,
2587 .has_remote = 1,
2588 },
2589 /* ---- card 0x8b ---------------------------------- */
2590 [BTTV_BOARD_PV_M4900] = {
2591 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2592 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2593 .video_inputs = 3,
2594 /* .audio_inputs= 1, */
2595 .svhs = 2,
2596 .gpiomask = 0x3f,
2597 .muxsel = MUXSEL(2, 3, 1, 1),
2598 .gpiomux = { 0x21, 0x20, 0x24, 0x2c },
2599 .gpiomute = 0x29,
2600 .no_msp34xx = 1,
2601 .pll = PLL_28,
2602 .tuner_type = TUNER_YMEC_TVF_5533MF,
2603 .tuner_addr = ADDR_UNSET,
2604 .has_radio = 1,
2605 .has_remote = 1,
2606 },
2607 /* ---- card 0x8c ---------------------------------- */
2608 /* Has four Bt878 chips behind a PCI bridge, each chip has:
2609 one external BNC composite input (mux 2)
2610 three internal composite inputs (unknown muxes)
2611 an 18-bit stereo A/D (CS5331A), which has:
2612 one external stereo unblanced (RCA) audio connection
2613 one (or 3?) internal stereo balanced (XLR) audio connection
2614 input is selected via gpio to a 14052B mux
2615 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2616 gain is controlled via an X9221A chip on the I2C bus @0x28
2617 sample rate is controlled via gpio to an MK1413S
2618 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2619 There is neither a tuner nor an svideo input. */
2620 [BTTV_BOARD_OSPREY440] = {
2621 .name = "Osprey 440",
2622 .video_inputs = 4,
2623 /* .audio_inputs= 2, */
2624 .svhs = NO_SVHS,
2625 .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2626 .gpiomask = 0x303,
2627 .gpiomute = 0x000, /* int + 32kHz */
2628 .gpiomux = { 0, 0, 0x000, 0x100},
2629 .pll = PLL_28,
2630 .tuner_type = TUNER_ABSENT,
2631 .tuner_addr = ADDR_UNSET,
2632 .no_msp34xx = 1,
2633 .no_tda9875 = 1,
2634 .no_tda7432 = 1,
2635 },
2636 /* ---- card 0x8d ---------------------------------- */
2637 [BTTV_BOARD_ASOUND_SKYEYE] = {
2638 .name = "Asound Skyeye PCTV",
2639 .video_inputs = 3,
2640 /* .audio_inputs= 1, */
2641 .svhs = 2,
2642 .gpiomask = 15,
2643 .muxsel = MUXSEL(2, 3, 1, 1),
2644 .gpiomux = { 2, 0, 0, 0 },
2645 .gpiomute = 1,
2646 .needs_tvaudio = 1,
2647 .pll = PLL_28,
2648 .tuner_type = TUNER_PHILIPS_NTSC,
2649 .tuner_addr = ADDR_UNSET,
2650 },
2651 /* ---- card 0x8e ---------------------------------- */
2652 [BTTV_BOARD_SABRENT_TVFM] = {
2653 .name = "Sabrent TV-FM (bttv version)",
2654 .video_inputs = 3,
2655 /* .audio_inputs= 1, */
2656 .svhs = 2,
2657 .gpiomask = 0x108007,
2658 .muxsel = MUXSEL(2, 3, 1, 1),
2659 .gpiomux = { 100000, 100002, 100002, 100000 },
2660 .no_msp34xx = 1,
2661 .no_tda9875 = 1,
2662 .no_tda7432 = 1,
2663 .pll = PLL_28,
2664 .tuner_type = TUNER_TNF_5335MF,
2665 .tuner_addr = ADDR_UNSET,
2666 .has_radio = 1,
2667 },
2668 /* ---- card 0x8f ---------------------------------- */
2669 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2670 .name = "Hauppauge ImpactVCB (bt878)",
2671 .video_inputs = 4,
2672 /* .audio_inputs= 0, */
2673 .svhs = NO_SVHS,
2674 .gpiomask = 0x0f, /* old: 7 */
2675 .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2676 .no_msp34xx = 1,
2677 .no_tda9875 = 1,
2678 .no_tda7432 = 1,
2679 .tuner_type = TUNER_ABSENT,
2680 .tuner_addr = ADDR_UNSET,
2681 },
2682 [BTTV_BOARD_MACHTV_MAGICTV] = {
2683
2684 .name = "MagicTV", /* rebranded MachTV */
2685 .video_inputs = 3,
2686 /* .audio_inputs= 1, */
2687 .svhs = 2,
2688 .gpiomask = 7,
2689 .muxsel = MUXSEL(2, 3, 1, 1),
2690 .gpiomux = { 0, 1, 2, 3 },
2691 .gpiomute = 4,
2692 .tuner_type = TUNER_TEMIC_4009FR5_PAL,
2693 .tuner_addr = ADDR_UNSET,
2694 .pll = PLL_28,
2695 .has_radio = 1,
2696 .has_remote = 1,
2697 },
2698 [BTTV_BOARD_SSAI_SECURITY] = {
2699 .name = "SSAI Security Video Interface",
2700 .video_inputs = 4,
2701 /* .audio_inputs= 0, */
2702 .svhs = NO_SVHS,
2703 .muxsel = MUXSEL(0, 1, 2, 3),
2704 .tuner_type = TUNER_ABSENT,
2705 .tuner_addr = ADDR_UNSET,
2706 },
2707 [BTTV_BOARD_SSAI_ULTRASOUND] = {
2708 .name = "SSAI Ultrasound Video Interface",
2709 .video_inputs = 2,
2710 /* .audio_inputs= 0, */
2711 .svhs = 1,
2712 .muxsel = MUXSEL(2, 0, 1, 3),
2713 .tuner_type = TUNER_ABSENT,
2714 .tuner_addr = ADDR_UNSET,
2715 },
2716 /* ---- card 0x94---------------------------------- */
2717 [BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2718 .name = "DViCO FusionHDTV 2",
2719 .tuner_type = TUNER_PHILIPS_FCV1236D,
2720 .tuner_addr = ADDR_UNSET,
2721 .video_inputs = 3,
2722 /* .audio_inputs= 1, */
2723 .svhs = 2,
2724 .muxsel = MUXSEL(2, 3, 1),
2725 .gpiomask = 0x00e00007,
2726 .gpiomux = { 0x00400005, 0, 0x00000001, 0 },
2727 .gpiomute = 0x00c00007,
2728 .no_msp34xx = 1,
2729 .no_tda9875 = 1,
2730 .no_tda7432 = 1,
2731 },
2732 /* ---- card 0x95---------------------------------- */
2733 [BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2734 .name = "Typhoon TV-Tuner PCI (50684)",
2735 .video_inputs = 3,
2736 /* .audio_inputs= 1, */
2737 .svhs = 2,
2738 .gpiomask = 0x3014f,
2739 .muxsel = MUXSEL(2, 3, 1, 1),
2740 .gpiomux = { 0x20001,0x10001, 0, 0 },
2741 .gpiomute = 10,
2742 .needs_tvaudio = 1,
2743 .pll = PLL_28,
2744 .tuner_type = TUNER_PHILIPS_PAL_I,
2745 .tuner_addr = ADDR_UNSET,
2746 },
2747 [BTTV_BOARD_GEOVISION_GV600] = {
2748 /* emhn@usb.ve */
2749 .name = "Geovision GV-600",
2750 .video_inputs = 16,
2751 /* .audio_inputs= 0, */
2752 .svhs = NO_SVHS,
2753 .gpiomask = 0x0,
2754 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2755 .muxsel_hook = geovision_muxsel,
2756 .gpiomux = { 0 },
2757 .no_msp34xx = 1,
2758 .pll = PLL_28,
2759 .tuner_type = TUNER_ABSENT,
2760 .tuner_addr = ADDR_UNSET,
2761 },
2762 [BTTV_BOARD_KOZUMI_KTV_01C] = {
2763 /* Mauro Lacy <mauro@lacy.com.ar>
2764 * Based on MagicTV and Conceptronic CONTVFMi */
2765
2766 .name = "Kozumi KTV-01C",
2767 .video_inputs = 3,
2768 /* .audio_inputs= 1, */
2769 .svhs = 2,
2770 .gpiomask = 0x008007,
2771 .muxsel = MUXSEL(2, 3, 1, 1),
2772 .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
2773 .gpiomute = 3, /* CONTVFMi */
2774 .needs_tvaudio = 0,
2775 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2776 .tuner_addr = ADDR_UNSET,
2777 .pll = PLL_28,
2778 .has_radio = 1,
2779 .has_remote = 1,
2780 },
2781 [BTTV_BOARD_ENLTV_FM_2] = {
2782 /* Encore TV Tuner Pro ENL TV-FM-2
2783 Mauro Carvalho Chehab <mchehab@infradead.org */
2784 .name = "Encore ENL TV-FM-2",
2785 .video_inputs = 3,
2786 /* .audio_inputs= 1, */
2787 .svhs = 2,
2788 /* bit 6 -> IR disabled
2789 bit 18/17 = 00 -> mute
2790 01 -> enable external audio input
2791 10 -> internal audio input (mono?)
2792 11 -> internal audio input
2793 */
2794 .gpiomask = 0x060040,
2795 .muxsel = MUXSEL(2, 3, 3),
2796 .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 },
2797 .gpiomute = 0,
2798 .tuner_type = TUNER_TCL_MF02GIP_5N,
2799 .tuner_addr = ADDR_UNSET,
2800 .pll = PLL_28,
2801 .has_radio = 1,
2802 .has_remote = 1,
2803 },
2804 [BTTV_BOARD_VD012] = {
2805 /* D.Heer@Phytec.de */
2806 .name = "PHYTEC VD-012 (bt878)",
2807 .video_inputs = 4,
2808 /* .audio_inputs= 0, */
2809 .svhs = NO_SVHS,
2810 .gpiomask = 0x00,
2811 .muxsel = MUXSEL(0, 2, 3, 1),
2812 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2813 .needs_tvaudio = 0,
2814 .pll = PLL_28,
2815 .tuner_type = TUNER_ABSENT,
2816 .tuner_addr = ADDR_UNSET,
2817 },
2818 [BTTV_BOARD_VD012_X1] = {
2819 /* D.Heer@Phytec.de */
2820 .name = "PHYTEC VD-012-X1 (bt878)",
2821 .video_inputs = 4,
2822 /* .audio_inputs= 0, */
2823 .svhs = 3,
2824 .gpiomask = 0x00,
2825 .muxsel = MUXSEL(2, 3, 1),
2826 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2827 .needs_tvaudio = 0,
2828 .pll = PLL_28,
2829 .tuner_type = TUNER_ABSENT,
2830 .tuner_addr = ADDR_UNSET,
2831 },
2832 [BTTV_BOARD_VD012_X2] = {
2833 /* D.Heer@Phytec.de */
2834 .name = "PHYTEC VD-012-X2 (bt878)",
2835 .video_inputs = 4,
2836 /* .audio_inputs= 0, */
2837 .svhs = 3,
2838 .gpiomask = 0x00,
2839 .muxsel = MUXSEL(3, 2, 1),
2840 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
2841 .needs_tvaudio = 0,
2842 .pll = PLL_28,
2843 .tuner_type = TUNER_ABSENT,
2844 .tuner_addr = ADDR_UNSET,
2845 },
2846 [BTTV_BOARD_GEOVISION_GV800S] = {
2847 /* Bruno Christo <bchristo@inf.ufsm.br>
2848 *
2849 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2850 * 1 audio input per BT878A = 4 audio inputs
2851 * 4 video inputs per BT878A = 16 video inputs
2852 * This is the first BT878A chip of the GV-800(S). It's the
2853 * "master" chip and it controls the video inputs through an
2854 * analog multiplexer (a CD22M3494) via some GPIO pins. The
2855 * slaves should use card type 0x9e (following this one).
2856 * There is a EEPROM on the card which is currently not handled.
2857 * The audio input is not working yet.
2858 */
2859 .name = "Geovision GV-800(S) (master)",
2860 .video_inputs = 4,
2861 /* .audio_inputs= 1, */
2862 .tuner_type = TUNER_ABSENT,
2863 .tuner_addr = ADDR_UNSET,
2864 .svhs = NO_SVHS,
2865 .gpiomask = 0xf107f,
2866 .no_gpioirq = 1,
2867 .muxsel = MUXSEL(2, 2, 2, 2),
2868 .pll = PLL_28,
2869 .no_msp34xx = 1,
2870 .no_tda7432 = 1,
2871 .no_tda9875 = 1,
2872 .muxsel_hook = gv800s_muxsel,
2873 },
2874 [BTTV_BOARD_GEOVISION_GV800S_SL] = {
2875 /* Bruno Christo <bchristo@inf.ufsm.br>
2876 *
2877 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2878 * 1 audio input per BT878A = 4 audio inputs
2879 * 4 video inputs per BT878A = 16 video inputs
2880 * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2881 * and should use this card type.
2882 * The audio input is not working yet.
2883 */
2884 .name = "Geovision GV-800(S) (slave)",
2885 .video_inputs = 4,
2886 /* .audio_inputs= 1, */
2887 .tuner_type = TUNER_ABSENT,
2888 .tuner_addr = ADDR_UNSET,
2889 .svhs = NO_SVHS,
2890 .gpiomask = 0x00,
2891 .no_gpioirq = 1,
2892 .muxsel = MUXSEL(2, 2, 2, 2),
2893 .pll = PLL_28,
2894 .no_msp34xx = 1,
2895 .no_tda7432 = 1,
2896 .no_tda9875 = 1,
2897 .muxsel_hook = gv800s_muxsel,
2898 },
2899 [BTTV_BOARD_PV183] = {
2900 .name = "ProVideo PV183", /* 0x9f */
2901 .video_inputs = 2,
2902 /* .audio_inputs= 0, */
2903 .svhs = NO_SVHS,
2904 .gpiomask = 0,
2905 .muxsel = MUXSEL(2, 3),
2906 .gpiomux = { 0 },
2907 .needs_tvaudio = 0,
2908 .no_msp34xx = 1,
2909 .pll = PLL_28,
2910 .tuner_type = TUNER_ABSENT,
2911 .tuner_addr = ADDR_UNSET,
2912 },
2913 };
2914
2915 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2916
2917 /* ----------------------------------------------------------------------- */
2918
2919 static unsigned char eeprom_data[256];
2920
2921 /*
2922 * identify card
2923 */
2924 void __devinit bttv_idcard(struct bttv *btv)
2925 {
2926 unsigned int gpiobits;
2927 int i,type;
2928 unsigned short tmp;
2929
2930 /* read PCI subsystem ID */
2931 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
2932 btv->cardid = tmp << 16;
2933 pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
2934 btv->cardid |= tmp;
2935
2936 if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2937 /* look for the card */
2938 for (type = -1, i = 0; cards[i].id != 0; i++)
2939 if (cards[i].id == btv->cardid)
2940 type = i;
2941
2942 if (type != -1) {
2943 /* found it */
2944 printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
2945 "PCI subsystem ID is %04x:%04x\n",
2946 btv->c.nr,cards[type].name,cards[type].cardnr,
2947 btv->cardid & 0xffff,
2948 (btv->cardid >> 16) & 0xffff);
2949 btv->c.type = cards[type].cardnr;
2950 } else {
2951 /* 404 */
2952 printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
2953 btv->c.nr, btv->cardid & 0xffff,
2954 (btv->cardid >> 16) & 0xffff);
2955 printk(KERN_DEBUG "please mail id, board name and "
2956 "the correct card= insmod option to linux-media@vger.kernel.org\n");
2957 }
2958 }
2959
2960 /* let the user override the autodetected type */
2961 if (card[btv->c.nr] < bttv_num_tvcards)
2962 btv->c.type=card[btv->c.nr];
2963
2964 /* print which card config we are using */
2965 printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
2966 bttv_tvcards[btv->c.type].name, btv->c.type,
2967 card[btv->c.nr] < bttv_num_tvcards
2968 ? "insmod option" : "autodetected");
2969
2970 /* overwrite gpio stuff ?? */
2971 if (UNSET == audioall && UNSET == audiomux[0])
2972 return;
2973
2974 if (UNSET != audiomux[0]) {
2975 gpiobits = 0;
2976 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2977 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2978 gpiobits |= audiomux[i];
2979 }
2980 } else {
2981 gpiobits = audioall;
2982 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2983 bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2984 }
2985 }
2986 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2987 printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
2988 btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
2989 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2990 printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2991 }
2992 printk("\n");
2993 }
2994
2995 /*
2996 * (most) board specific initialisations goes here
2997 */
2998
2999 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
3000 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
3001 {
3002 int type = -1;
3003
3004 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
3005 type = BTTV_BOARD_MODTEC_205;
3006 else if (0 == strncmp(eeprom_data+20,"Picolo",7))
3007 type = BTTV_BOARD_EURESYS_PICOLO;
3008 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
3009 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
3010
3011 if (-1 != type) {
3012 btv->c.type = type;
3013 printk("bttv%d: detected by eeprom: %s [card=%d]\n",
3014 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
3015 }
3016 }
3017
3018 static void flyvideo_gpio(struct bttv *btv)
3019 {
3020 int gpio, has_remote, has_radio, is_capture_only;
3021 int is_lr90, has_tda9820_tda9821;
3022 int tuner_type = UNSET, ttype;
3023
3024 gpio_inout(0xffffff, 0);
3025 udelay(8); /* without this we would see the 0x1800 mask */
3026 gpio = gpio_read();
3027
3028 /* all cards provide GPIO info, some have an additional eeprom
3029 * LR50: GPIO coding can be found lower right CP1 .. CP9
3030 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3031 * GPIO14-12: n.c.
3032 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3033
3034 * lowest 3 bytes are remote control codes (no handshake needed)
3035 * xxxFFF: No remote control chip soldered
3036 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3037 * Note: Some bits are Audio_Mask !
3038 */
3039 ttype = (gpio & 0x0f0000) >> 16;
3040 switch (ttype) {
3041 case 0x0:
3042 tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */
3043 break;
3044 case 0x2:
3045 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3046 break;
3047 case 0x4:
3048 tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3049 break;
3050 case 0x6:
3051 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3052 break;
3053 case 0xC:
3054 tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3055 break;
3056 default:
3057 printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
3058 break;
3059 }
3060
3061 has_remote = gpio & 0x800000;
3062 has_radio = gpio & 0x400000;
3063 /* unknown 0x200000;
3064 * unknown2 0x100000; */
3065 is_capture_only = !(gpio & 0x008000); /* GPIO15 */
3066 has_tda9820_tda9821 = !(gpio & 0x004000);
3067 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3068 /*
3069 * gpio & 0x001000 output bit for audio routing */
3070
3071 if (is_capture_only)
3072 tuner_type = TUNER_ABSENT; /* No tuner present */
3073
3074 printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3075 btv->c.nr, has_radio ? "yes" : "no ",
3076 has_remote ? "yes" : "no ", tuner_type, gpio);
3077 printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3078 btv->c.nr, is_lr90 ? "yes" : "no ",
3079 has_tda9820_tda9821 ? "yes" : "no ",
3080 is_capture_only ? "yes" : "no ");
3081
3082 if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3083 btv->tuner_type = tuner_type;
3084 btv->has_radio = has_radio;
3085
3086 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3087 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3088 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3089 if (has_tda9820_tda9821)
3090 btv->audio_mode_gpio = lt9415_audio;
3091 /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3092 }
3093
3094 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
3095 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
3096 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
3097 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
3098
3099 static void miro_pinnacle_gpio(struct bttv *btv)
3100 {
3101 int id,msp,gpio;
3102 char *info;
3103
3104 gpio_inout(0xffffff, 0);
3105 gpio = gpio_read();
3106 id = ((gpio>>10) & 63) -1;
3107 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3108 if (id < 32) {
3109 btv->tuner_type = miro_tunermap[id];
3110 if (0 == (gpio & 0x20)) {
3111 btv->has_radio = 1;
3112 if (!miro_fmtuner[id]) {
3113 btv->has_matchbox = 1;
3114 btv->mbox_we = (1<<6);
3115 btv->mbox_most = (1<<7);
3116 btv->mbox_clk = (1<<8);
3117 btv->mbox_data = (1<<9);
3118 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
3119 }
3120 } else {
3121 btv->has_radio = 0;
3122 }
3123 if (-1 != msp) {
3124 if (btv->c.type == BTTV_BOARD_MIRO)
3125 btv->c.type = BTTV_BOARD_MIROPRO;
3126 if (btv->c.type == BTTV_BOARD_PINNACLE)
3127 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3128 }
3129 printk(KERN_INFO
3130 "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3131 btv->c.nr, id+1, btv->tuner_type,
3132 !btv->has_radio ? "no" :
3133 (btv->has_matchbox ? "matchbox" : "fmtuner"),
3134 (-1 == msp) ? "no" : "yes");
3135 } else {
3136 /* new cards with microtune tuner */
3137 id = 63 - id;
3138 btv->has_radio = 0;
3139 switch (id) {
3140 case 1:
3141 info = "PAL / mono";
3142 btv->tda9887_conf = TDA9887_INTERCARRIER;
3143 break;
3144 case 2:
3145 info = "PAL+SECAM / stereo";
3146 btv->has_radio = 1;
3147 btv->tda9887_conf = TDA9887_QSS;
3148 break;
3149 case 3:
3150 info = "NTSC / stereo";
3151 btv->has_radio = 1;
3152 btv->tda9887_conf = TDA9887_QSS;
3153 break;
3154 case 4:
3155 info = "PAL+SECAM / mono";
3156 btv->tda9887_conf = TDA9887_QSS;
3157 break;
3158 case 5:
3159 info = "NTSC / mono";
3160 btv->tda9887_conf = TDA9887_INTERCARRIER;
3161 break;
3162 case 6:
3163 info = "NTSC / stereo";
3164 btv->tda9887_conf = TDA9887_INTERCARRIER;
3165 break;
3166 case 7:
3167 info = "PAL / stereo";
3168 btv->tda9887_conf = TDA9887_INTERCARRIER;
3169 break;
3170 default:
3171 info = "oops: unknown card";
3172 break;
3173 }
3174 if (-1 != msp)
3175 btv->c.type = BTTV_BOARD_PINNACLEPRO;
3176 printk(KERN_INFO
3177 "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3178 btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3179 btv->tuner_type = TUNER_MT2032;
3180 }
3181 }
3182
3183 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
3184 #define LM1882_SYNC_DRIVE 0x200000L
3185
3186 static void init_ids_eagle(struct bttv *btv)
3187 {
3188 gpio_inout(0xffffff,0xFFFF37);
3189 gpio_write(0x200020);
3190
3191 /* flash strobe inverter ?! */
3192 gpio_write(0x200024);
3193
3194 /* switch sync drive off */
3195 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3196
3197 /* set BT848 muxel to 2 */
3198 btaor((2)<<5, ~(2<<5), BT848_IFORM);
3199 }
3200
3201 /* Muxsel helper for the IDS Eagle.
3202 * the eagles does not use the standard muxsel-bits but
3203 * has its own multiplexer */
3204 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3205 {
3206 gpio_bits(3, input & 3);
3207
3208 /* composite */
3209 /* set chroma ADC to sleep */
3210 btor(BT848_ADC_C_SLEEP, BT848_ADC);
3211 /* set to composite video */
3212 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3213 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3214
3215 /* switch sync drive off */
3216 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3217 }
3218
3219 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3220 {
3221 static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3222 gpio_write(masks[input%4]);
3223 }
3224
3225 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3226 alarms output
3227
3228 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3229 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
3230
3231 IN - sensor inputs, INx - sensor inputs and TI XORed together
3232 O1,O2,O3 - alarm outputs (relays)
3233
3234 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
3235
3236 */
3237
3238 static void init_lmlbt4x(struct bttv *btv)
3239 {
3240 printk(KERN_DEBUG "LMLBT4x init\n");
3241 btwrite(0x000000, BT848_GPIO_REG_INP);
3242 gpio_inout(0xffffff, 0x0006C0);
3243 gpio_write(0x000000);
3244 }
3245
3246 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3247 {
3248 unsigned int inmux = input % 8;
3249 gpio_inout( 0xf, 0xf );
3250 gpio_bits( 0xf, inmux );
3251 }
3252
3253 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3254 {
3255 unsigned int inmux = input % 4;
3256 gpio_inout( 3<<9, 3<<9 );
3257 gpio_bits( 3<<9, inmux<<9 );
3258 }
3259
3260 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3261 {
3262 unsigned int inmux = input % 16;
3263 gpio_inout(0xf, 0xf);
3264 gpio_bits(0xf, inmux);
3265 }
3266
3267 /* ----------------------------------------------------------------------- */
3268
3269 static void bttv_reset_audio(struct bttv *btv)
3270 {
3271 /*
3272 * BT878A has a audio-reset register.
3273 * 1. This register is an audio reset function but it is in
3274 * function-0 (video capture) address space.
3275 * 2. It is enough to do this once per power-up of the card.
3276 * 3. There is a typo in the Conexant doc -- it is not at
3277 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3278 * --//Shrikumar 030609
3279 */
3280 if (btv->id != 878)
3281 return;
3282
3283 if (bttv_debug)
3284 printk("bttv%d: BT878A ARESET\n",btv->c.nr);
3285 btwrite((1<<7), 0x058);
3286 udelay(10);
3287 btwrite( 0, 0x058);
3288 }
3289
3290 /* initialization part one -- before registering i2c bus */
3291 void __devinit bttv_init_card1(struct bttv *btv)
3292 {
3293 switch (btv->c.type) {
3294 case BTTV_BOARD_HAUPPAUGE:
3295 case BTTV_BOARD_HAUPPAUGE878:
3296 boot_msp34xx(btv,5);
3297 break;
3298 case BTTV_BOARD_VOODOOTV_200:
3299 case BTTV_BOARD_VOODOOTV_FM:
3300 boot_msp34xx(btv,20);
3301 break;
3302 case BTTV_BOARD_AVERMEDIA98:
3303 boot_msp34xx(btv,11);
3304 break;
3305 case BTTV_BOARD_HAUPPAUGEPVR:
3306 pvr_boot(btv);
3307 break;
3308 case BTTV_BOARD_TWINHAN_DST:
3309 case BTTV_BOARD_AVDVBT_771:
3310 case BTTV_BOARD_PINNACLESAT:
3311 btv->use_i2c_hw = 1;
3312 break;
3313 case BTTV_BOARD_ADLINK_RTV24:
3314 init_RTV24( btv );
3315 break;
3316
3317 }
3318 if (!bttv_tvcards[btv->c.type].has_dvb)
3319 bttv_reset_audio(btv);
3320 }
3321
3322 /* initialization part two -- after registering i2c bus */
3323 void __devinit bttv_init_card2(struct bttv *btv)
3324 {
3325 btv->tuner_type = UNSET;
3326
3327 if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3328 bttv_readee(btv,eeprom_data,0xa0);
3329 identify_by_eeprom(btv,eeprom_data);
3330 }
3331
3332 switch (btv->c.type) {
3333 case BTTV_BOARD_MIRO:
3334 case BTTV_BOARD_MIROPRO:
3335 case BTTV_BOARD_PINNACLE:
3336 case BTTV_BOARD_PINNACLEPRO:
3337 /* miro/pinnacle */
3338 miro_pinnacle_gpio(btv);
3339 break;
3340 case BTTV_BOARD_FLYVIDEO_98:
3341 case BTTV_BOARD_MAXI:
3342 case BTTV_BOARD_LIFE_FLYKIT:
3343 case BTTV_BOARD_FLYVIDEO:
3344 case BTTV_BOARD_TYPHOON_TVIEW:
3345 case BTTV_BOARD_CHRONOS_VS2:
3346 case BTTV_BOARD_FLYVIDEO_98FM:
3347 case BTTV_BOARD_FLYVIDEO2000:
3348 case BTTV_BOARD_FLYVIDEO98EZ:
3349 case BTTV_BOARD_CONFERENCETV:
3350 case BTTV_BOARD_LIFETEC_9415:
3351 flyvideo_gpio(btv);
3352 break;
3353 case BTTV_BOARD_HAUPPAUGE:
3354 case BTTV_BOARD_HAUPPAUGE878:
3355 case BTTV_BOARD_HAUPPAUGEPVR:
3356 /* pick up some config infos from the eeprom */
3357 bttv_readee(btv,eeprom_data,0xa0);
3358 hauppauge_eeprom(btv);
3359 break;
3360 case BTTV_BOARD_AVERMEDIA98:
3361 case BTTV_BOARD_AVPHONE98:
3362 bttv_readee(btv,eeprom_data,0xa0);
3363 avermedia_eeprom(btv);
3364 break;
3365 case BTTV_BOARD_PXC200:
3366 init_PXC200(btv);
3367 break;
3368 case BTTV_BOARD_PICOLO_TETRA_CHIP:
3369 picolo_tetra_init(btv);
3370 break;
3371 case BTTV_BOARD_VHX:
3372 btv->has_radio = 1;
3373 btv->has_matchbox = 1;
3374 btv->mbox_we = 0x20;
3375 btv->mbox_most = 0;
3376 btv->mbox_clk = 0x08;
3377 btv->mbox_data = 0x10;
3378 btv->mbox_mask = 0x38;
3379 break;
3380 case BTTV_BOARD_VOBIS_BOOSTAR:
3381 case BTTV_BOARD_TERRATV:
3382 terratec_active_radio_upgrade(btv);
3383 break;
3384 case BTTV_BOARD_MAGICTVIEW061:
3385 if (btv->cardid == 0x3002144f) {
3386 btv->has_radio=1;
3387 printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
3388 }
3389 break;
3390 case BTTV_BOARD_STB2:
3391 if (btv->cardid == 0x3060121a) {
3392 /* Fix up entry for 3DFX VoodooTV 100,
3393 which is an OEM STB card variant. */
3394 btv->has_radio=0;
3395 btv->tuner_type=TUNER_TEMIC_NTSC;
3396 }
3397 break;
3398 case BTTV_BOARD_OSPREY1x0:
3399 case BTTV_BOARD_OSPREY1x0_848:
3400 case BTTV_BOARD_OSPREY101_848:
3401 case BTTV_BOARD_OSPREY1x1:
3402 case BTTV_BOARD_OSPREY1x1_SVID:
3403 case BTTV_BOARD_OSPREY2xx:
3404 case BTTV_BOARD_OSPREY2x0_SVID:
3405 case BTTV_BOARD_OSPREY2x0:
3406 case BTTV_BOARD_OSPREY440:
3407 case BTTV_BOARD_OSPREY500:
3408 case BTTV_BOARD_OSPREY540:
3409 case BTTV_BOARD_OSPREY2000:
3410 bttv_readee(btv,eeprom_data,0xa0);
3411 osprey_eeprom(btv, eeprom_data);
3412 break;
3413 case BTTV_BOARD_IDS_EAGLE:
3414 init_ids_eagle(btv);
3415 break;
3416 case BTTV_BOARD_MODTEC_205:
3417 bttv_readee(btv,eeprom_data,0xa0);
3418 modtec_eeprom(btv);
3419 break;
3420 case BTTV_BOARD_LMLBT4:
3421 init_lmlbt4x(btv);
3422 break;
3423 case BTTV_BOARD_TIBET_CS16:
3424 tibetCS16_init(btv);
3425 break;
3426 case BTTV_BOARD_KODICOM_4400R:
3427 kodicom4400r_init(btv);
3428 break;
3429 case BTTV_BOARD_GEOVISION_GV800S:
3430 gv800s_init(btv);
3431 break;
3432 }
3433
3434 /* pll configuration */
3435 if (!(btv->id==848 && btv->revision==0x11)) {
3436 /* defaults from card list */
3437 if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3438 btv->pll.pll_ifreq=28636363;
3439 btv->pll.pll_crystal=BT848_IFORM_XT0;
3440 }
3441 if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3442 btv->pll.pll_ifreq=35468950;
3443 btv->pll.pll_crystal=BT848_IFORM_XT1;
3444 }
3445 /* insmod options can override */
3446 switch (pll[btv->c.nr]) {
3447 case 0: /* none */
3448 btv->pll.pll_crystal = 0;
3449 btv->pll.pll_ifreq = 0;
3450 btv->pll.pll_ofreq = 0;
3451 break;
3452 case 1: /* 28 MHz */
3453 case 28:
3454 btv->pll.pll_ifreq = 28636363;
3455 btv->pll.pll_ofreq = 0;
3456 btv->pll.pll_crystal = BT848_IFORM_XT0;
3457 break;
3458 case 2: /* 35 MHz */
3459 case 35:
3460 btv->pll.pll_ifreq = 35468950;
3461 btv->pll.pll_ofreq = 0;
3462 btv->pll.pll_crystal = BT848_IFORM_XT1;
3463 break;
3464 }
3465 }
3466 btv->pll.pll_current = -1;
3467
3468 /* tuner configuration (from card list / autodetect / insmod option) */
3469 if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3470 if (UNSET == btv->tuner_type)
3471 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3472 if (UNSET != tuner[btv->c.nr])
3473 btv->tuner_type = tuner[btv->c.nr];
3474
3475 if (btv->tuner_type == TUNER_ABSENT)
3476 printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
3477 else if(btv->tuner_type == UNSET)
3478 printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
3479 else
3480 printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
3481 btv->tuner_type);
3482
3483 if (autoload != UNSET) {
3484 printk(KERN_WARNING "bttv%d: the autoload option is obsolete.\n", btv->c.nr);
3485 printk(KERN_WARNING "bttv%d: use option msp3400, tda7432 or tvaudio to\n", btv->c.nr);
3486 printk(KERN_WARNING "bttv%d: override which audio module should be used.\n", btv->c.nr);
3487 }
3488
3489 if (UNSET == btv->tuner_type)
3490 btv->tuner_type = TUNER_ABSENT;
3491
3492 btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3493 bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3494 btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3495 UNSET : bttv_tvcards[btv->c.type].svhs;
3496 if (svhs[btv->c.nr] != UNSET)
3497 btv->svhs = svhs[btv->c.nr];
3498 if (remote[btv->c.nr] != UNSET)
3499 btv->has_remote = remote[btv->c.nr];
3500
3501 if (bttv_tvcards[btv->c.type].has_radio)
3502 btv->has_radio = 1;
3503 if (bttv_tvcards[btv->c.type].has_remote)
3504 btv->has_remote = 1;
3505 if (!bttv_tvcards[btv->c.type].no_gpioirq)
3506 btv->gpioirq = 1;
3507 if (bttv_tvcards[btv->c.type].volume_gpio)
3508 btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
3509 if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3510 btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
3511
3512 if (btv->tuner_type == TUNER_ABSENT)
3513 return; /* no tuner or related drivers to load */
3514
3515 if (btv->has_saa6588 || saa6588[btv->c.nr]) {
3516 /* Probe for RDS receiver chip */
3517 static const unsigned short addrs[] = {
3518 0x20 >> 1,
3519 0x22 >> 1,
3520 I2C_CLIENT_END
3521 };
3522 struct v4l2_subdev *sd;
3523
3524 sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3525 &btv->c.i2c_adap, "saa6588", "saa6588", 0, addrs);
3526 btv->has_saa6588 = (sd != NULL);
3527 }
3528
3529 /* try to detect audio/fader chips */
3530
3531 /* First check if the user specified the audio chip via a module
3532 option. */
3533
3534 switch (audiodev[btv->c.nr]) {
3535 case -1:
3536 return; /* do not load any audio module */
3537
3538 case 0: /* autodetect */
3539 break;
3540
3541 case 1: {
3542 /* The user specified that we should probe for msp3400 */
3543 static const unsigned short addrs[] = {
3544 I2C_ADDR_MSP3400 >> 1,
3545 I2C_ADDR_MSP3400_ALT >> 1,
3546 I2C_CLIENT_END
3547 };
3548
3549 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3550 &btv->c.i2c_adap, "msp3400", "msp3400", 0, addrs);
3551 if (btv->sd_msp34xx)
3552 return;
3553 goto no_audio;
3554 }
3555
3556 case 2: {
3557 /* The user specified that we should probe for tda7432 */
3558 static const unsigned short addrs[] = {
3559 I2C_ADDR_TDA7432 >> 1,
3560 I2C_CLIENT_END
3561 };
3562
3563 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3564 &btv->c.i2c_adap, "tda7432", "tda7432", 0, addrs))
3565 return;
3566 goto no_audio;
3567 }
3568
3569 case 3: {
3570 /* The user specified that we should probe for tvaudio */
3571 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3572 &btv->c.i2c_adap, "tvaudio", "tvaudio", 0, tvaudio_addrs());
3573 if (btv->sd_tvaudio)
3574 return;
3575 goto no_audio;
3576 }
3577
3578 default:
3579 printk(KERN_WARNING "bttv%d: unknown audiodev value!\n",
3580 btv->c.nr);
3581 return;
3582 }
3583
3584 /* There were no overrides, so now we try to discover this through the
3585 card definition */
3586
3587 /* probe for msp3400 first: this driver can detect whether or not
3588 it really is a msp3400, so it will return NULL when the device
3589 found is really something else (e.g. a tea6300). */
3590 if (!bttv_tvcards[btv->c.type].no_msp34xx) {
3591 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3592 &btv->c.i2c_adap, "msp3400", "msp3400",
3593 0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
3594 } else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
3595 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3596 &btv->c.i2c_adap, "msp3400", "msp3400",
3597 0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
3598 }
3599
3600 /* If we found a msp34xx, then we're done. */
3601 if (btv->sd_msp34xx)
3602 return;
3603
3604 /* it might also be a tda7432. */
3605 if (!bttv_tvcards[btv->c.type].no_tda7432) {
3606 static const unsigned short addrs[] = {
3607 I2C_ADDR_TDA7432 >> 1,
3608 I2C_CLIENT_END
3609 };
3610
3611 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3612 &btv->c.i2c_adap, "tda7432", "tda7432", 0, addrs))
3613 return;
3614 }
3615
3616 /* Now see if we can find one of the tvaudio devices. */
3617 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3618 &btv->c.i2c_adap, "tvaudio", "tvaudio", 0, tvaudio_addrs());
3619 if (btv->sd_tvaudio)
3620 return;
3621
3622 no_audio:
3623 printk(KERN_WARNING "bttv%d: audio absent, no audio device found!\n",
3624 btv->c.nr);
3625 }
3626
3627
3628 /* initialize the tuner */
3629 void __devinit bttv_init_tuner(struct bttv *btv)
3630 {
3631 int addr = ADDR_UNSET;
3632
3633 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3634 addr = bttv_tvcards[btv->c.type].tuner_addr;
3635
3636 if (btv->tuner_type != TUNER_ABSENT) {
3637 struct tuner_setup tun_setup;
3638
3639 /* Load tuner module before issuing tuner config call! */
3640 if (bttv_tvcards[btv->c.type].has_radio)
3641 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3642 &btv->c.i2c_adap, "tuner", "tuner",
3643 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
3644 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3645 &btv->c.i2c_adap, "tuner", "tuner",
3646 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
3647 v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3648 &btv->c.i2c_adap, "tuner", "tuner",
3649 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
3650
3651 tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
3652 tun_setup.type = btv->tuner_type;
3653 tun_setup.addr = addr;
3654
3655 if (bttv_tvcards[btv->c.type].has_radio)
3656 tun_setup.mode_mask |= T_RADIO;
3657
3658 bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
3659 }
3660
3661 if (btv->tda9887_conf) {
3662 struct v4l2_priv_tun_config tda9887_cfg;
3663
3664 tda9887_cfg.tuner = TUNER_TDA9887;
3665 tda9887_cfg.priv = &btv->tda9887_conf;
3666
3667 bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
3668 }
3669 }
3670
3671 /* ----------------------------------------------------------------------- */
3672
3673 static void modtec_eeprom(struct bttv *btv)
3674 {
3675 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3676 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3677 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3678 btv->c.nr,&eeprom_data[0x1e]);
3679 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3680 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3681 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3682 btv->c.nr,&eeprom_data[0x1e]);
3683 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3684 btv->tuner_type=TUNER_PHILIPS_NTSC;
3685 printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
3686 btv->c.nr,&eeprom_data[0x1e]);
3687 } else {
3688 printk("bttv%d: Modtec: Unknown TunerString: %s\n",
3689 btv->c.nr,&eeprom_data[0x1e]);
3690 }
3691 }
3692
3693 static void __devinit hauppauge_eeprom(struct bttv *btv)
3694 {
3695 struct tveeprom tv;
3696
3697 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
3698 btv->tuner_type = tv.tuner_type;
3699 btv->has_radio = tv.has_radio;
3700
3701 printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
3702 btv->c.nr, tv.model);
3703
3704 /*
3705 * Some of the 878 boards have duplicate PCI IDs. Switch the board
3706 * type based on model #.
3707 */
3708 if(tv.model == 64900) {
3709 printk("bttv%d: Switching board type from %s to %s\n",
3710 btv->c.nr,
3711 bttv_tvcards[btv->c.type].name,
3712 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3713 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3714 }
3715 }
3716
3717 static int terratec_active_radio_upgrade(struct bttv *btv)
3718 {
3719 int freq;
3720
3721 btv->has_radio = 1;
3722 btv->has_matchbox = 1;
3723 btv->mbox_we = 0x10;
3724 btv->mbox_most = 0x20;
3725 btv->mbox_clk = 0x08;
3726 btv->mbox_data = 0x04;
3727 btv->mbox_mask = 0x3c;
3728
3729 btv->mbox_iow = 1 << 8;
3730 btv->mbox_ior = 1 << 9;
3731 btv->mbox_csel = 1 << 10;
3732
3733 freq=88000/62.5;
3734 tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
3735 if (0x1ed8 == tea5757_read(btv)) {
3736 printk("bttv%d: Terratec Active Radio Upgrade found.\n",
3737 btv->c.nr);
3738 btv->has_radio = 1;
3739 btv->has_saa6588 = 1;
3740 btv->has_matchbox = 1;
3741 } else {
3742 btv->has_radio = 0;
3743 btv->has_matchbox = 0;
3744 }
3745 return 0;
3746 }
3747
3748
3749 /* ----------------------------------------------------------------------- */
3750
3751 /*
3752 * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3753 *
3754 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
3755 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3756 * unpacked with unzip).
3757 */
3758 #define PVR_GPIO_DELAY 10
3759
3760 #define BTTV_ALT_DATA 0x000001
3761 #define BTTV_ALT_DCLK 0x100000
3762 #define BTTV_ALT_NCONFIG 0x800000
3763
3764 static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro,
3765 u32 microlen)
3766 {
3767 u32 n;
3768 u8 bits;
3769 int i;
3770
3771 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3772 gpio_write(0);
3773 udelay(PVR_GPIO_DELAY);
3774
3775 gpio_write(BTTV_ALT_NCONFIG);
3776 udelay(PVR_GPIO_DELAY);
3777
3778 for (n = 0; n < microlen; n++) {
3779 bits = micro[n];
3780 for (i = 0 ; i < 8 ; i++) {
3781 gpio_bits(BTTV_ALT_DCLK,0);
3782 if (bits & 0x01)
3783 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3784 else
3785 gpio_bits(BTTV_ALT_DATA,0);
3786 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3787 bits >>= 1;
3788 }
3789 }
3790 gpio_bits(BTTV_ALT_DCLK,0);
3791 udelay(PVR_GPIO_DELAY);
3792
3793 /* begin Altera init loop (Not necessary,but doesn't hurt) */
3794 for (i = 0 ; i < 30 ; i++) {
3795 gpio_bits(BTTV_ALT_DCLK,0);
3796 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3797 }
3798 gpio_bits(BTTV_ALT_DCLK,0);
3799 return 0;
3800 }
3801
3802 static int __devinit pvr_boot(struct bttv *btv)
3803 {
3804 const struct firmware *fw_entry;
3805 int rc;
3806
3807 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3808 if (rc != 0) {
3809 printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
3810 btv->c.nr);
3811 return rc;
3812 }
3813 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3814 printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
3815 btv->c.nr, (rc < 0) ? "failed" : "ok");
3816 release_firmware(fw_entry);
3817 return rc;
3818 }
3819
3820 /* ----------------------------------------------------------------------- */
3821 /* some osprey specific stuff */
3822
3823 static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
3824 {
3825 int i;
3826 u32 serial = 0;
3827 int cardid = -1;
3828
3829 /* This code will nevery actually get called in this case.... */
3830 if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3831 /* this might be an antique... check for MMAC label in eeprom */
3832 if (!strncmp(ee, "MMAC", 4)) {
3833 u8 checksum = 0;
3834 for (i = 0; i < 21; i++)
3835 checksum += ee[i];
3836 if (checksum != ee[21])
3837 return;
3838 cardid = BTTV_BOARD_OSPREY1x0_848;
3839 for (i = 12; i < 21; i++)
3840 serial *= 10, serial += ee[i] - '0';
3841 }
3842 } else {
3843 unsigned short type;
3844
3845 for (i = 4*16; i < 8*16; i += 16) {
3846 u16 checksum = ip_compute_csum(ee + i, 16);
3847
3848 if ((checksum&0xff) + (checksum>>8) == 0xff)
3849 break;
3850 }
3851 if (i >= 8*16)
3852 return;
3853 ee += i;
3854
3855 /* found a valid descriptor */
3856 type = get_unaligned_be16((__be16 *)(ee+4));
3857
3858 switch(type) {
3859 /* 848 based */
3860 case 0x0004:
3861 cardid = BTTV_BOARD_OSPREY1x0_848;
3862 break;
3863 case 0x0005:
3864 cardid = BTTV_BOARD_OSPREY101_848;
3865 break;
3866
3867 /* 878 based */
3868 case 0x0012:
3869 case 0x0013:
3870 cardid = BTTV_BOARD_OSPREY1x0;
3871 break;
3872 case 0x0014:
3873 case 0x0015:
3874 cardid = BTTV_BOARD_OSPREY1x1;
3875 break;
3876 case 0x0016:
3877 case 0x0017:
3878 case 0x0020:
3879 cardid = BTTV_BOARD_OSPREY1x1_SVID;
3880 break;
3881 case 0x0018:
3882 case 0x0019:
3883 case 0x001E:
3884 case 0x001F:
3885 cardid = BTTV_BOARD_OSPREY2xx;
3886 break;
3887 case 0x001A:
3888 case 0x001B:
3889 cardid = BTTV_BOARD_OSPREY2x0_SVID;
3890 break;
3891 case 0x0040:
3892 cardid = BTTV_BOARD_OSPREY500;
3893 break;
3894 case 0x0050:
3895 case 0x0056:
3896 cardid = BTTV_BOARD_OSPREY540;
3897 /* bttv_osprey_540_init(btv); */
3898 break;
3899 case 0x0060:
3900 case 0x0070:
3901 case 0x00A0:
3902 cardid = BTTV_BOARD_OSPREY2x0;
3903 /* enable output on select control lines */
3904 gpio_inout(0xffffff,0x000303);
3905 break;
3906 case 0x00D8:
3907 cardid = BTTV_BOARD_OSPREY440;
3908 break;
3909 default:
3910 /* unknown...leave generic, but get serial # */
3911 printk(KERN_INFO "bttv%d: "
3912 "osprey eeprom: unknown card type 0x%04x\n",
3913 btv->c.nr, type);
3914 break;
3915 }
3916 serial = get_unaligned_be32((__be32 *)(ee+6));
3917 }
3918
3919 printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
3920 btv->c.nr, cardid,
3921 cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial);
3922
3923 if (cardid<0 || btv->c.type == cardid)
3924 return;
3925
3926 /* card type isn't set correctly */
3927 if (card[btv->c.nr] < bttv_num_tvcards) {
3928 printk(KERN_WARNING "bttv%d: osprey eeprom: "
3929 "Not overriding user specified card type\n", btv->c.nr);
3930 } else {
3931 printk(KERN_INFO "bttv%d: osprey eeprom: "
3932 "Changing card type from %d to %d\n", btv->c.nr,
3933 btv->c.type, cardid);
3934 btv->c.type = cardid;
3935 }
3936 }
3937
3938 /* ----------------------------------------------------------------------- */
3939 /* AVermedia specific stuff, from bktr_card.c */
3940
3941 static int tuner_0_table[] = {
3942 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
3943 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
3944 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
3945 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
3946 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
3947 TUNER_PHILIPS_FM1216ME_MK3 };
3948
3949 static int tuner_1_table[] = {
3950 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
3951 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3952 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
3953 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
3954 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
3955
3956 static void __devinit avermedia_eeprom(struct bttv *btv)
3957 {
3958 int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
3959
3960 tuner_make = (eeprom_data[0x41] & 0x7);
3961 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
3962 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
3963 btv->has_remote = (eeprom_data[0x42] & 0x01);
3964
3965 if (tuner_make == 0 || tuner_make == 2)
3966 if (tuner_format <= 0x0a)
3967 tuner_type = tuner_0_table[tuner_format];
3968 if (tuner_make == 1)
3969 if (tuner_format <= 9)
3970 tuner_type = tuner_1_table[tuner_format];
3971
3972 if (tuner_make == 4)
3973 if (tuner_format == 0x09)
3974 tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
3975
3976 printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
3977 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
3978 if (tuner_type) {
3979 btv->tuner_type = tuner_type;
3980 printk(KERN_CONT "%d", tuner_type);
3981 } else
3982 printk(KERN_CONT "Unknown type");
3983 printk(KERN_CONT " radio:%s remote control:%s\n",
3984 tuner_tv_fm ? "yes" : "no",
3985 btv->has_remote ? "yes" : "no");
3986 }
3987
3988 /*
3989 * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880
3990 * analog demod, which is not I2C controlled like the newer and more common
3991 * TDA9887 series. Instead is has two tri-state input pins, S0 and S1,
3992 * that control the IF for the video and audio. Apparently, bttv GPIO
3993 * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I
3994 * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
3995 */
3996 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
3997 {
3998
3999 if (btv->audio == TVAUDIO_INPUT_TUNER) {
4000 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
4001 gpiobits |= 0x10000;
4002 else
4003 gpiobits &= ~0x10000;
4004 }
4005
4006 gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
4007 return gpiobits;
4008 }
4009
4010
4011 /*
4012 * reset/enable the MSP on some Hauppauge cards
4013 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
4014 *
4015 * Hauppauge: pin 5
4016 * Voodoo: pin 20
4017 */
4018 static void __devinit boot_msp34xx(struct bttv *btv, int pin)
4019 {
4020 int mask = (1 << pin);
4021
4022 gpio_inout(mask,mask);
4023 gpio_bits(mask,0);
4024 mdelay(2);
4025 udelay(500);
4026 gpio_bits(mask,mask);
4027
4028 if (bttv_gpio)
4029 bttv_gpio_tracking(btv,"msp34xx");
4030 if (bttv_verbose)
4031 printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
4032 "init [%d]\n", btv->c.nr, pin);
4033 }
4034
4035 /* ----------------------------------------------------------------------- */
4036 /* Imagenation L-Model PXC200 Framegrabber */
4037 /* This is basically the same procedure as
4038 * used by Alessandro Rubini in his pxc200
4039 * driver, but using BTTV functions */
4040
4041 static void __devinit init_PXC200(struct bttv *btv)
4042 {
4043 static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
4044 0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
4045 0x00 };
4046 unsigned int i;
4047 int tmp;
4048 u32 val;
4049
4050 /* Initialise GPIO-connevted stuff */
4051 gpio_inout(0xffffff, (1<<13));
4052 gpio_write(0);
4053 udelay(3);
4054 gpio_write(1<<13);
4055 /* GPIO inputs are pulled up, so no need to drive
4056 * reset pin any longer */
4057 gpio_bits(0xffffff, 0);
4058 if (bttv_gpio)
4059 bttv_gpio_tracking(btv,"pxc200");
4060
4061 /* we could/should try and reset/control the AD pots? but
4062 right now we simply turned off the crushing. Without
4063 this the AGC drifts drifts
4064 remember the EN is reverse logic -->
4065 setting BT848_ADC_AGC_EN disable the AGC
4066 tboult@eecs.lehigh.edu
4067 */
4068
4069 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4070
4071 /* Initialise MAX517 DAC */
4072 printk(KERN_INFO "Setting DAC reference voltage level ...\n");
4073 bttv_I2CWrite(btv,0x5E,0,0x80,1);
4074
4075 /* Initialise 12C508 PIC */
4076 /* The I2CWrite and I2CRead commmands are actually to the
4077 * same chips - but the R/W bit is included in the address
4078 * argument so the numbers are different */
4079
4080
4081 printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
4082
4083 /* First of all, enable the clock line. This is used in the PXC200-F */
4084 val = btread(BT848_GPIO_DMA_CTL);
4085 val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4086 btwrite(val, BT848_GPIO_DMA_CTL);
4087
4088 /* Then, push to 0 the reset pin long enough to reset the *
4089 * device same as above for the reset line, but not the same
4090 * value sent to the GPIO-connected stuff
4091 * which one is the good one? */
4092 gpio_inout(0xffffff,(1<<2));
4093 gpio_write(0);
4094 udelay(10);
4095 gpio_write(1<<2);
4096
4097 for (i = 0; i < ARRAY_SIZE(vals); i++) {
4098 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4099 if (tmp != -1) {
4100 printk(KERN_INFO
4101 "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4102 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4103 }
4104 }
4105
4106 printk(KERN_INFO "PXC200 Initialised.\n");
4107 }
4108
4109
4110
4111 /* ----------------------------------------------------------------------- */
4112 /*
4113 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4114 * it. This apparently involves the following procedure for each 878 chip:
4115 *
4116 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register
4117 *
4118 * 2) write to GPIO_DATA
4119 * - 0x0E
4120 * - sleep 1ms
4121 * - 0x10 + 0x0E
4122 * - sleep 10ms
4123 * - 0x0E
4124 * read from GPIO_DATA into buf (uint_32)
4125 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4126 * error. ERROR_CPLD_Check_Failed stop.
4127 *
4128 * 3) write to GPIO_DATA
4129 * - write 0x4400 + 0x0E
4130 * - sleep 10ms
4131 * - write 0x4410 + 0x0E
4132 * - sleep 1ms
4133 * - write 0x0E
4134 * read from GPIO_DATA into buf (uint_32)
4135 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4136 * error. ERROR_CPLD_Check_Failed.
4137 */
4138 /* ----------------------------------------------------------------------- */
4139 static void
4140 init_RTV24 (struct bttv *btv)
4141 {
4142 uint32_t dataRead = 0;
4143 long watchdog_value = 0x0E;
4144
4145 printk (KERN_INFO
4146 "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
4147 btv->c.nr);
4148
4149 btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4150
4151 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4152 msleep (1);
4153 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4154 msleep (10);
4155 btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4156
4157 dataRead = btread (BT848_GPIO_DATA);
4158
4159 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4160 printk (KERN_INFO
4161 "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4162 btv->c.nr, dataRead);
4163 }
4164
4165 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4166 msleep (10);
4167 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4168 msleep (1);
4169 btwrite (watchdog_value, BT848_GPIO_DATA);
4170 msleep (1);
4171 dataRead = btread (BT848_GPIO_DATA);
4172
4173 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4174 printk (KERN_INFO
4175 "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4176 btv->c.nr, dataRead);
4177
4178 return;
4179 }
4180
4181 printk (KERN_INFO
4182 "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
4183 }
4184
4185
4186
4187 /* ----------------------------------------------------------------------- */
4188 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
4189 /*
4190 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
4191 * This code is placed under the terms of the GNU General Public License
4192 *
4193 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
4194 */
4195
4196 static void bus_low(struct bttv *btv, int bit)
4197 {
4198 if (btv->mbox_ior) {
4199 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4200 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4201 udelay(5);
4202 }
4203
4204 gpio_bits(bit,0);
4205 udelay(5);
4206
4207 if (btv->mbox_ior) {
4208 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4209 udelay(5);
4210 }
4211 }
4212
4213 static void bus_high(struct bttv *btv, int bit)
4214 {
4215 if (btv->mbox_ior) {
4216 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4217 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4218 udelay(5);
4219 }
4220
4221 gpio_bits(bit,bit);
4222 udelay(5);
4223
4224 if (btv->mbox_ior) {
4225 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4226 udelay(5);
4227 }
4228 }
4229
4230 static int bus_in(struct bttv *btv, int bit)
4231 {
4232 if (btv->mbox_ior) {
4233 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4234 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4235 udelay(5);
4236
4237 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
4238 udelay(5);
4239 }
4240 return gpio_read() & (bit);
4241 }
4242
4243 /* TEA5757 register bits */
4244 #define TEA_FREQ 0:14
4245 #define TEA_BUFFER 15:15
4246
4247 #define TEA_SIGNAL_STRENGTH 16:17
4248
4249 #define TEA_PORT1 18:18
4250 #define TEA_PORT0 19:19
4251
4252 #define TEA_BAND 20:21
4253 #define TEA_BAND_FM 0
4254 #define TEA_BAND_MW 1
4255 #define TEA_BAND_LW 2
4256 #define TEA_BAND_SW 3
4257
4258 #define TEA_MONO 22:22
4259 #define TEA_ALLOW_STEREO 0
4260 #define TEA_FORCE_MONO 1
4261
4262 #define TEA_SEARCH_DIRECTION 23:23
4263 #define TEA_SEARCH_DOWN 0
4264 #define TEA_SEARCH_UP 1
4265
4266 #define TEA_STATUS 24:24
4267 #define TEA_STATUS_TUNED 0
4268 #define TEA_STATUS_SEARCHING 1
4269
4270 /* Low-level stuff */
4271 static int tea5757_read(struct bttv *btv)
4272 {
4273 unsigned long timeout;
4274 int value = 0;
4275 int i;
4276
4277 /* better safe than sorry */
4278 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
4279
4280 if (btv->mbox_ior) {
4281 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4282 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4283 udelay(5);
4284 }
4285
4286 if (bttv_gpio)
4287 bttv_gpio_tracking(btv,"tea5757 read");
4288
4289 bus_low(btv,btv->mbox_we);
4290 bus_low(btv,btv->mbox_clk);
4291
4292 udelay(10);
4293 timeout= jiffies + msecs_to_jiffies(1000);
4294
4295 /* wait for DATA line to go low; error if it doesn't */
4296 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
4297 schedule();
4298 if (bus_in(btv,btv->mbox_data)) {
4299 printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
4300 return -1;
4301 }
4302
4303 dprintk("bttv%d: tea5757:",btv->c.nr);
4304 for (i = 0; i < 24; i++) {
4305 udelay(5);
4306 bus_high(btv,btv->mbox_clk);
4307 udelay(5);
4308 dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
4309 bus_low(btv,btv->mbox_clk);
4310 value <<= 1;
4311 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
4312 dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
4313 }
4314 dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
4315 return value;
4316 }
4317
4318 static int tea5757_write(struct bttv *btv, int value)
4319 {
4320 int i;
4321 int reg = value;
4322
4323 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
4324
4325 if (btv->mbox_ior) {
4326 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
4327 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
4328 udelay(5);
4329 }
4330 if (bttv_gpio)
4331 bttv_gpio_tracking(btv,"tea5757 write");
4332
4333 dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
4334 bus_low(btv,btv->mbox_clk);
4335 bus_high(btv,btv->mbox_we);
4336 for (i = 0; i < 25; i++) {
4337 if (reg & 0x1000000)
4338 bus_high(btv,btv->mbox_data);
4339 else
4340 bus_low(btv,btv->mbox_data);
4341 reg <<= 1;
4342 bus_high(btv,btv->mbox_clk);
4343 udelay(10);
4344 bus_low(btv,btv->mbox_clk);
4345 udelay(10);
4346 }
4347 bus_low(btv,btv->mbox_we); /* unmute !!! */
4348 return 0;
4349 }
4350
4351 void tea5757_set_freq(struct bttv *btv, unsigned short freq)
4352 {
4353 dprintk("tea5757_set_freq %d\n",freq);
4354 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
4355 }
4356
4357 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4358 *
4359 * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4360 * switch instead (CD22M3494E). This IC can have multiple active connections
4361 * between Xn (input) and Yn (output) pins. We need to clear any existing
4362 * connection prior to establish a new one, pulsing the STROBE pin.
4363 *
4364 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4365 * GPIO pins are wired as:
4366 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4367 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4368 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
4369 * GPIO[8] - - P3[5] (microcontroller)
4370 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
4371 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
4372 * GPINTR - - P3[4] (microcontroller)
4373 *
4374 * The microcontroller is a 80C32 like. It should be possible to change xpoint
4375 * configuration either directly (as we are doing) or using the microcontroller
4376 * which is also wired to I2C interface. I have no further info on the
4377 * microcontroller features, one would need to disassembly the firmware.
4378 * note: the vendor refused to give any information on this product, all
4379 * that stuff was found using a multimeter! :)
4380 */
4381 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4382 {
4383 static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4384 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4385
4386 gpio_bits(0x07f, muxgpio[input]);
4387
4388 /* reset all conections */
4389 gpio_bits(0x200,0x200);
4390 mdelay(1);
4391 gpio_bits(0x200,0x000);
4392 mdelay(1);
4393
4394 /* create a new connection */
4395 gpio_bits(0x480,0x480);
4396 mdelay(1);
4397 gpio_bits(0x480,0x080);
4398 mdelay(1);
4399 }
4400
4401 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4402 *
4403 * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4404 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
4405 * chips, ten eight input analog multiplexors, a not chip and a few
4406 * other components.
4407 *
4408 * 16 inputs on a secondary bracket are provided and can be selected
4409 * from each of the four capture chips. Two of the eight input
4410 * multiplexors are used to select from any of the 16 input signals.
4411 *
4412 * Unsupported hardware capabilities:
4413 * . A video output monitor on the secondary bracket can be selected from
4414 * one of the 878A chips.
4415 * . Another passthrough but I haven't spent any time investigating it.
4416 * . Digital I/O (logic level connected to GPIO) is available from an
4417 * onboard header.
4418 *
4419 * The on chip input mux should always be set to 2.
4420 * GPIO[16:19] - Video input selection
4421 * GPIO[0:3] - Video output monitor select (only available from one 878A)
4422 * GPIO[?:?] - Digital I/O.
4423 *
4424 * There is an ATMEL microcontroller with an 8031 core on board. I have not
4425 * determined what function (if any) it provides. With the microcontroller
4426 * and sync separator chips a guess is that it might have to do with video
4427 * switching and maybe some digital I/O.
4428 */
4429 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4430 {
4431 /* video mux */
4432 gpio_bits(0x0f0000, input << 16);
4433 }
4434
4435 static void tibetCS16_init(struct bttv *btv)
4436 {
4437 /* enable gpio bits, mask obtained via btSpy */
4438 gpio_inout(0xffffff, 0x0f7fff);
4439 gpio_write(0x0f7fff);
4440 }
4441
4442 /*
4443 * The following routines for the Kodicom-4400r get a little mind-twisting.
4444 * There is a "master" controller and three "slave" controllers, together
4445 * an analog switch which connects any of 16 cameras to any of the BT87A's.
4446 * The analog switch is controlled by the "master", but the detection order
4447 * of the four BT878A chips is in an order which I just don't understand.
4448 * The "master" is actually the second controller to be detected. The
4449 * logic on the board uses logical numbers for the 4 controllers, but
4450 * those numbers are different from the detection sequence. When working
4451 * with the analog switch, we need to "map" from the detection sequence
4452 * over to the board's logical controller number. This mapping sequence
4453 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4454 * unit 3, the second (which is the master) is logical unit 0, etc.
4455 * We need to maintain the status of the analog switch (which of the 16
4456 * cameras is connected to which of the 4 controllers). Rather than
4457 * add to the bttv structure for this, we use the data reserved for
4458 * the mbox (unused for this card type).
4459 */
4460
4461 /*
4462 * First a routine to set the analog switch, which controls which camera
4463 * is routed to which controller. The switch comprises an X-address
4464 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4465 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4466 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4467 * the switch. A STROBE bit (gpio bit 8) latches the data value into the
4468 * specified address. The idea is to set the address and data, then bring
4469 * STROBE high, and finally bring STROBE back to low.
4470 */
4471 static void kodicom4400r_write(struct bttv *btv,
4472 unsigned char xaddr,
4473 unsigned char yaddr,
4474 unsigned char data) {
4475 unsigned int udata;
4476
4477 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4478 gpio_bits(0x1ff, udata); /* write ADDR and DAT */
4479 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
4480 gpio_bits(0x1ff, udata); /* strobe low */
4481 }
4482
4483 /*
4484 * Next the mux select. Both the "master" and "slave" 'cards' (controllers)
4485 * use this routine. The routine finds the "master" for the card, maps
4486 * the controller number from the detected position over to the logical
4487 * number, writes the appropriate data to the analog switch, and housekeeps
4488 * the local copy of the switch information. The parameter 'input' is the
4489 * requested camera number (0 - 15).
4490 */
4491 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4492 {
4493 char *sw_status;
4494 int xaddr, yaddr;
4495 struct bttv *mctlr;
4496 static unsigned char map[4] = {3, 0, 2, 1};
4497
4498 mctlr = master[btv->c.nr];
4499 if (mctlr == NULL) { /* ignore if master not yet detected */
4500 return;
4501 }
4502 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4503 yaddr = map[yaddr];
4504 sw_status = (char *)(&mctlr->mbox_we);
4505 xaddr = input & 0xf;
4506 /* Check if the controller/camera pair has changed, else ignore */
4507 if (sw_status[yaddr] != xaddr)
4508 {
4509 /* "open" the old switch, "close" the new one, save the new */
4510 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
4511 sw_status[yaddr] = xaddr;
4512 kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4513 }
4514 }
4515
4516 /*
4517 * During initialisation, we need to reset the analog switch. We
4518 * also preset the switch to map the 4 connectors on the card to the
4519 * *user's* (see above description of kodicom4400r_muxsel) channels
4520 * 0 through 3
4521 */
4522 static void kodicom4400r_init(struct bttv *btv)
4523 {
4524 char *sw_status = (char *)(&btv->mbox_we);
4525 int ix;
4526
4527 gpio_inout(0x0003ff, 0x0003ff);
4528 gpio_write(1 << 9); /* reset MUX */
4529 gpio_write(0);
4530 /* Preset camera 0 to the 4 controllers */
4531 for (ix = 0; ix < 4; ix++) {
4532 sw_status[ix] = ix;
4533 kodicom4400r_write(btv, ix, ix, 1);
4534 }
4535 /*
4536 * Since this is the "master", we need to set up the
4537 * other three controller chips' pointers to this structure
4538 * for later use in the muxsel routine.
4539 */
4540 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4541 return;
4542 master[btv->c.nr-1] = btv;
4543 master[btv->c.nr] = btv;
4544 master[btv->c.nr+1] = btv;
4545 master[btv->c.nr+2] = btv;
4546 }
4547
4548 #define ENA0 0x01
4549 #define ENB0 0x02
4550 #define ENA1 0x04
4551 #define ENB1 0x08
4552
4553 #define IN10 0x10
4554 #define IN00 0x20
4555 #define IN11 0x40
4556 #define IN01 0x80
4557
4558 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4559 {
4560 static const int masks[] = {
4561 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4562 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4563 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4564 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4565 };
4566 gpio_write(masks[input%16]);
4567 }
4568 static void picolo_tetra_init(struct bttv *btv)
4569 {
4570 /*This is the video input redirection fonctionality : I DID NOT USED IT. */
4571 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4572 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
4573 }
4574 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4575 {
4576
4577 dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
4578 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4579 /*GPIO[20]&GPIO[21] used to choose the right input*/
4580 btwrite (input<<20,BT848_GPIO_DATA);
4581
4582 }
4583
4584 /*
4585 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4586 *
4587 * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4588 * swichers to provide 16 channels to MUX0. The TDA8540's have
4589 * 4 independent outputs and as such the IVC120G also has the
4590 * optional "Monitor Out" bus. This allows the card to be looking
4591 * at one input while the monitor is looking at another.
4592 *
4593 * Since I've couldn't be bothered figuring out how to add an
4594 * independant muxsel for the monitor bus, I've just set it to
4595 * whatever the card is looking at.
4596 *
4597 * OUT0 of the TDA8540's is connected to MUX0 (0x03)
4598 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
4599 *
4600 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
4601 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
4602 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
4603 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
4604 *
4605 */
4606
4607 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4608 #define I2C_TDA8540 0x90
4609 #define I2C_TDA8540_ALT1 0x92
4610 #define I2C_TDA8540_ALT2 0x94
4611 #define I2C_TDA8540_ALT3 0x96
4612 #define I2C_TDA8540_ALT4 0x98
4613 #define I2C_TDA8540_ALT5 0x9a
4614 #define I2C_TDA8540_ALT6 0x9c
4615
4616 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4617 {
4618 /* Simple maths */
4619 int key = input % 4;
4620 int matrix = input / 4;
4621
4622 dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4623 btv->c.nr, input, matrix, key);
4624
4625 /* Handles the input selection on the TDA8540's */
4626 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4627 ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4628 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4629 ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4630 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4631 ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4632 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4633 ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4634
4635 /* Handles the output enables on the TDA8540's */
4636 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4637 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
4638 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4639 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
4640 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4641 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
4642 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4643 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
4644
4645 /* 878's MUX0 is already selected for input via muxsel values */
4646 }
4647
4648
4649 /* PXC200 muxsel helper
4650 * luke@syseng.anu.edu.au
4651 * another transplant
4652 * from Alessandro Rubini (rubini@linux.it)
4653 *
4654 * There are 4 kinds of cards:
4655 * PXC200L which is bt848
4656 * PXC200F which is bt848 with PIC controlling mux
4657 * PXC200AL which is bt878
4658 * PXC200AF which is bt878 with PIC controlling mux
4659 */
4660 #define PX_CFG_PXC200F 0x01
4661 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
4662 #define PX_I2C_PIC 0x0f
4663 #define PX_PXC200A_CARDID 0x200a1295
4664 #define PX_I2C_CMD_CFG 0x00
4665
4666 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4667 {
4668 int rc;
4669 long mux;
4670 int bitmask;
4671 unsigned char buf[2];
4672
4673 /* Read PIC config to determine if this is a PXC200F */
4674 /* PX_I2C_CMD_CFG*/
4675 buf[0]=0;
4676 buf[1]=0;
4677 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4678 if (rc) {
4679 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
4680 /* not PXC ? do nothing */
4681 return;
4682 }
4683
4684 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4685 if (!(rc & PX_CFG_PXC200F)) {
4686 printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
4687 return;
4688 }
4689
4690
4691 /* The multiplexer in the 200F is handled by the GPIO port */
4692 /* get correct mapping between inputs */
4693 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4694 /* ** not needed!? */
4695 mux = input;
4696
4697 /* make sure output pins are enabled */
4698 /* bitmask=0x30f; */
4699 bitmask=0x302;
4700 /* check whether we have a PXC200A */
4701 if (btv->cardid == PX_PXC200A_CARDID) {
4702 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4703 bitmask |= 7<<4; /* the DAC */
4704 }
4705 btwrite(bitmask, BT848_GPIO_OUT_EN);
4706
4707 bitmask = btread(BT848_GPIO_DATA);
4708 if (btv->cardid == PX_PXC200A_CARDID)
4709 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4710 else /* older device */
4711 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4712 btwrite(bitmask,BT848_GPIO_DATA);
4713
4714 /*
4715 * Was "to be safe, set the bt848 to input 0"
4716 * Actually, since it's ok at load time, better not messing
4717 * with these bits (on PXC200AF you need to set mux 2 here)
4718 *
4719 * needed because bttv-driver sets mux before calling this function
4720 */
4721 if (btv->cardid == PX_PXC200A_CARDID)
4722 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4723 else /* older device */
4724 btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4725
4726 printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
4727 }
4728
4729 static void phytec_muxsel(struct bttv *btv, unsigned int input)
4730 {
4731 unsigned int mux = input % 4;
4732
4733 if (input == btv->svhs)
4734 mux = 0;
4735
4736 gpio_bits(0x3, mux);
4737 }
4738
4739 /*
4740 * GeoVision GV-800(S) functions
4741 * Bruno Christo <bchristo@inf.ufsm.br>
4742 */
4743
4744 /* This is a function to control the analog switch, which determines which
4745 * camera is routed to which controller. The switch comprises an X-address
4746 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4747 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4748 * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4749 * the switch. A STROBE bit (gpio bit 17) latches the data value into the
4750 * specified address. There is also a chip select (gpio bit 16).
4751 * The idea is to set the address and chip select together, bring
4752 * STROBE high, write the data, and finally bring STROBE back to low.
4753 */
4754 static void gv800s_write(struct bttv *btv,
4755 unsigned char xaddr,
4756 unsigned char yaddr,
4757 unsigned char data) {
4758 /* On the "master" 878A:
4759 * GPIO bits 0-9 are used for the analog switch:
4760 * 00 - 03: camera selector
4761 * 04 - 06: 878A (controller) selector
4762 * 16: cselect
4763 * 17: strobe
4764 * 18: data (1->on, 0->off)
4765 * 19: reset
4766 */
4767 const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4768 const u32 CSELECT = 1<<16;
4769 const u32 STROBE = 1<<17;
4770 const u32 DATA = data<<18;
4771
4772 gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */
4773 gpio_bits(0x20000, STROBE); /* STROBE high */
4774 gpio_bits(0x40000, DATA); /* write DATA */
4775 gpio_bits(0x20000, ~STROBE); /* STROBE low */
4776 }
4777
4778 /*
4779 * GeoVision GV-800(S) muxsel
4780 *
4781 * Each of the 4 cards (controllers) use this function.
4782 * The controller using this function selects the input through the GPIO pins
4783 * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4784 *
4785 * The parameter 'input' is the requested camera number (0-4) on the controller.
4786 * The map array has the address of each input. Note that the addresses in the
4787 * array are in the sequence the original GeoVision driver uses, that is, set
4788 * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4789 * the physical "camera 1" connector corresponds to controller 0 input 0,
4790 * "camera 2" corresponds to controller 1 input 0, and so on.
4791 *
4792 * After getting the input address, the function then writes the appropriate
4793 * data to the analog switch, and housekeeps the local copy of the switch
4794 * information.
4795 */
4796 static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4797 {
4798 struct bttv *mctlr;
4799 char *sw_status;
4800 int xaddr, yaddr;
4801 static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4802 { 0x1, 0x5, 0xb, 0x7 },
4803 { 0x2, 0x8, 0xc, 0xe },
4804 { 0x3, 0x9, 0xd, 0xf } };
4805 input = input%4;
4806 mctlr = master[btv->c.nr];
4807 if (mctlr == NULL) {
4808 /* do nothing until the "master" is detected */
4809 return;
4810 }
4811 yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4812 sw_status = (char *)(&mctlr->mbox_we);
4813 xaddr = map[yaddr][input] & 0xf;
4814
4815 /* Check if the controller/camera pair has changed, ignore otherwise */
4816 if (sw_status[yaddr] != xaddr) {
4817 /* disable the old switch, enable the new one and save status */
4818 gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
4819 sw_status[yaddr] = xaddr;
4820 gv800s_write(mctlr, xaddr, yaddr, 1);
4821 }
4822 }
4823
4824 /* GeoVision GV-800(S) "master" chip init */
4825 static void gv800s_init(struct bttv *btv)
4826 {
4827 char *sw_status = (char *)(&btv->mbox_we);
4828 int ix;
4829
4830 gpio_inout(0xf107f, 0xf107f);
4831 gpio_write(1<<19); /* reset the analog MUX */
4832 gpio_write(0);
4833
4834 /* Preset camera 0 to the 4 controllers */
4835 for (ix = 0; ix < 4; ix++) {
4836 sw_status[ix] = ix;
4837 gv800s_write(btv, ix, ix, 1);
4838 }
4839
4840 /* Inputs on the "master" controller need this brightness fix */
4841 bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4842
4843 if (btv->c.nr > BTTV_MAX-4)
4844 return;
4845 /*
4846 * Store the "master" controller pointer in the master
4847 * array for later use in the muxsel function.
4848 */
4849 master[btv->c.nr] = btv;
4850 master[btv->c.nr+1] = btv;
4851 master[btv->c.nr+2] = btv;
4852 master[btv->c.nr+3] = btv;
4853 }
4854
4855 /* ----------------------------------------------------------------------- */
4856 /* motherboard chipset specific stuff */
4857
4858 void __init bttv_check_chipset(void)
4859 {
4860 int pcipci_fail = 0;
4861 struct pci_dev *dev = NULL;
4862
4863 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */
4864 pcipci_fail = 1;
4865 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4866 triton1 = 1;
4867 if (pci_pci_problems & PCIPCI_VSFX)
4868 vsfx = 1;
4869 #ifdef PCIPCI_ALIMAGIK
4870 if (pci_pci_problems & PCIPCI_ALIMAGIK)
4871 latency = 0x0A;
4872 #endif
4873
4874
4875 /* print warnings about any quirks found */
4876 if (triton1)
4877 printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
4878 if (vsfx)
4879 printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
4880 if (pcipci_fail) {
4881 printk(KERN_INFO "bttv: bttv and your chipset may not work "
4882 "together.\n");
4883 if (!no_overlay) {
4884 printk(KERN_INFO "bttv: overlay will be disabled.\n");
4885 no_overlay = 1;
4886 } else {
4887 printk(KERN_INFO "bttv: overlay forced. Use this "
4888 "option at your own risk.\n");
4889 }
4890 }
4891 if (UNSET != latency)
4892 printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
4893 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4894 PCI_DEVICE_ID_INTEL_82441, dev))) {
4895 unsigned char b;
4896 pci_read_config_byte(dev, 0x53, &b);
4897 if (bttv_debug)
4898 printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
4899 "bufcon=0x%02x\n",b);
4900 }
4901 }
4902
4903 int __devinit bttv_handle_chipset(struct bttv *btv)
4904 {
4905 unsigned char command;
4906
4907 if (!triton1 && !vsfx && UNSET == latency)
4908 return 0;
4909
4910 if (bttv_verbose) {
4911 if (triton1)
4912 printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
4913 if (vsfx && btv->id >= 878)
4914 printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
4915 if (UNSET != latency)
4916 printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
4917 btv->c.nr,latency);
4918 }
4919
4920 if (btv->id < 878) {
4921 /* bt848 (mis)uses a bit in the irq mask for etbf */
4922 if (triton1)
4923 btv->triton1 = BT848_INT_ETBF;
4924 } else {
4925 /* bt878 has a bit in the pci config space for it */
4926 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4927 if (triton1)
4928 command |= BT878_EN_TBFX;
4929 if (vsfx)
4930 command |= BT878_EN_VSFX;
4931 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4932 }
4933 if (UNSET != latency)
4934 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4935 return 0;
4936 }
4937
4938
4939 /*
4940 * Local variables:
4941 * c-basic-offset: 8
4942 * End:
4943 */
Tomato firmware and modifications.