GUI: Fix Tomato RAF theme for all builds. Compilation typo.
[tomato.git] / release / src-rt-6.x.4708 / linux / linux-2.6.36 / drivers / media / dvb / dvb-usb / cinergyT2.h
blob154a0d2e670666dec05c89ec4add584e755ef8a2
1 /*
2 * TerraTec Cinergy T2/qanu USB2 DVB-T adapter.
4 * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi)
6 * Based on the dvb-usb-framework code and the
7 * original Terratec Cinergy T2 driver by:
9 * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and
10 * Holger Waechtler <holger@qanu.de>
12 * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License as published by
16 * the Free Software Foundation; either version 2 of the License, or
17 * (at your option) any later version.
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, write to the Free Software
26 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
30 #ifndef _DVB_USB_CINERGYT2_H_
31 #define _DVB_USB_CINERGYT2_H_
33 #include <linux/usb/input.h>
35 #define DVB_USB_LOG_PREFIX "cinergyT2"
36 #include "dvb-usb.h"
38 #define DRIVER_NAME "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver"
40 extern int dvb_usb_cinergyt2_debug;
42 #define deb_info(args...) dprintk(dvb_usb_cinergyt2_debug, 0x001, args)
43 #define deb_xfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x002, args)
44 #define deb_pll(args...) dprintk(dvb_usb_cinergyt2_debug, 0x004, args)
45 #define deb_ts(args...) dprintk(dvb_usb_cinergyt2_debug, 0x008, args)
46 #define deb_err(args...) dprintk(dvb_usb_cinergyt2_debug, 0x010, args)
47 #define deb_rc(args...) dprintk(dvb_usb_cinergyt2_debug, 0x020, args)
48 #define deb_fw(args...) dprintk(dvb_usb_cinergyt2_debug, 0x040, args)
49 #define deb_mem(args...) dprintk(dvb_usb_cinergyt2_debug, 0x080, args)
50 #define deb_uxfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x100, args)
54 enum cinergyt2_ep1_cmd {
55 CINERGYT2_EP1_PID_TABLE_RESET = 0x01,
56 CINERGYT2_EP1_PID_SETUP = 0x02,
57 CINERGYT2_EP1_CONTROL_STREAM_TRANSFER = 0x03,
58 CINERGYT2_EP1_SET_TUNER_PARAMETERS = 0x04,
59 CINERGYT2_EP1_GET_TUNER_STATUS = 0x05,
60 CINERGYT2_EP1_START_SCAN = 0x06,
61 CINERGYT2_EP1_CONTINUE_SCAN = 0x07,
62 CINERGYT2_EP1_GET_RC_EVENTS = 0x08,
63 CINERGYT2_EP1_SLEEP_MODE = 0x09,
64 CINERGYT2_EP1_GET_FIRMWARE_VERSION = 0x0A
68 struct dvbt_get_status_msg {
69 uint32_t freq;
70 uint8_t bandwidth;
71 uint16_t tps;
72 uint8_t flags;
73 __le16 gain;
74 uint8_t snr;
75 __le32 viterbi_error_rate;
76 uint32_t rs_error_rate;
77 __le32 uncorrected_block_count;
78 uint8_t lock_bits;
79 uint8_t prev_lock_bits;
80 } __attribute__((packed));
83 struct dvbt_set_parameters_msg {
84 uint8_t cmd;
85 __le32 freq;
86 uint8_t bandwidth;
87 __le16 tps;
88 uint8_t flags;
89 } __attribute__((packed));
92 extern struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d);
94 #endif /* _DVB_USB_CINERGYT2_H_ */