release/src-rt-6.x.4708/linux/linux-2.6.36/drivers/isdn/hisax/hfc_usb.h

   1 /*
   2  * hfc_usb.h
   3  *
   4  * $Id: hfc_usb.h,v 1.1.2.5 2007/08/20 14:36:03 Exp $
   5  */
   6
   7 #ifndef __HFC_USB_H__
   8 #define __HFC_USB_H__
   9
  10 #define DRIVER_AUTHOR   "Peter Sprenger (sprenger@moving-byters.de)"
  11 #define DRIVER_DESC     "HFC-S USB based HiSAX ISDN driver"
  12
  13
  14 #define HFC_CTRL_TIMEOUT        20      /* 5ms timeout writing/reading regs */
  15 #define HFC_TIMER_T3            8000    /* timeout for l1 activation timer */
  16 #define HFC_TIMER_T4            500     /* time for state change interval */
  17
  18 #define HFCUSB_L1_STATECHANGE   0       /* L1 state changed */
  19 #define HFCUSB_L1_DRX           1       /* D-frame received */
  20 #define HFCUSB_L1_ERX           2       /* E-frame received */
  21 #define HFCUSB_L1_DTX           4       /* D-frames completed */
  22
  23 #define MAX_BCH_SIZE            2048    /* allowed B-channel packet size */
  24
  25 #define HFCUSB_RX_THRESHOLD     64      /* threshold for fifo report bit rx */
  26 #define HFCUSB_TX_THRESHOLD     64      /* threshold for fifo report bit tx */
  27
  28 #define HFCUSB_CHIP_ID          0x16    /* Chip ID register index */
  29 #define HFCUSB_CIRM             0x00    /* cirm register index */
  30 #define HFCUSB_USB_SIZE         0x07    /* int length register */
  31 #define HFCUSB_USB_SIZE_I       0x06    /* iso length register */
  32 #define HFCUSB_F_CROSS          0x0b    /* bit order register */
  33 #define HFCUSB_CLKDEL           0x37    /* bit delay register */
  34 #define HFCUSB_CON_HDLC         0xfa    /* channel connect register */
  35 #define HFCUSB_HDLC_PAR         0xfb
  36 #define HFCUSB_SCTRL            0x31    /* S-bus control register (tx) */
  37 #define HFCUSB_SCTRL_E          0x32    /* same for E and special funcs */
  38 #define HFCUSB_SCTRL_R          0x33    /* S-bus control register (rx) */
  39 #define HFCUSB_F_THRES          0x0c    /* threshold register */
  40 #define HFCUSB_FIFO             0x0f    /* fifo select register */
  41 #define HFCUSB_F_USAGE          0x1a    /* fifo usage register */
  42 #define HFCUSB_MST_MODE0        0x14
  43 #define HFCUSB_MST_MODE1        0x15
  44 #define HFCUSB_P_DATA           0x1f
  45 #define HFCUSB_INC_RES_F        0x0e
  46 #define HFCUSB_STATES           0x30
  47
  48 #define HFCUSB_CHIPID           0x40    /* ID value of HFC-S USB */
  49
  50
  51 /* fifo registers */
  52 #define HFCUSB_NUM_FIFOS        8       /* maximum number of fifos */
  53 #define HFCUSB_B1_TX            0       /* index for B1 transmit bulk/int */
  54 #define HFCUSB_B1_RX            1       /* index for B1 receive bulk/int */
  55 #define HFCUSB_B2_TX            2
  56 #define HFCUSB_B2_RX            3
  57 #define HFCUSB_D_TX             4
  58 #define HFCUSB_D_RX             5
  59 #define HFCUSB_PCM_TX           6
  60 #define HFCUSB_PCM_RX           7
  61
  62 /*
  63  * used to switch snd_transfer_mode for different TA modes e.g. the Billion USB TA just
  64  * supports ISO out, while the Cologne Chip EVAL TA just supports BULK out
  65  */
  66 #define USB_INT         0
  67 #define USB_BULK        1
  68 #define USB_ISOC        2
  69
  70 #define ISOC_PACKETS_D  8
  71 #define ISOC_PACKETS_B  8
  72 #define ISO_BUFFER_SIZE 128
  73
  74 /* Fifo flow Control for TX ISO */
  75 #define SINK_MAX        68
  76 #define SINK_MIN        48
  77 #define SINK_DMIN       12
  78 #define SINK_DMAX       18
  79 #define BITLINE_INF     (-64*8)
  80
  81 /* HFC-S USB register access by Control-URSs */
  82 #define write_usb(a,b,c)usb_control_msg((a)->dev,(a)->ctrl_out_pipe,0,0x40,(c),(b),NULL,0,HFC_CTRL_TIMEOUT)
  83 #define read_usb(a,b,c) usb_control_msg((a)->dev,(a)->ctrl_in_pipe,1,0xC0,0,(b),(c),1,HFC_CTRL_TIMEOUT)
  84 #define HFC_CTRL_BUFSIZE 32
  85
  86 /* entry and size of output/input control buffer */
  87 typedef struct {
  88         __u8 hfc_reg;           /* register number */
  89         __u8 reg_val;           /* value to be written (or read) */
  90         int action;             /* data for action handler */
  91 } ctrl_buft;
  92
  93 /* Debugging Flags */
  94 #define HFCUSB_DBG_INIT         0x0001
  95 #define HFCUSB_DBG_STATES       0x0002
  96 #define HFCUSB_DBG_DCHANNEL     0x0080
  97 #define HFCUSB_DBG_FIFO_ERR     0x4000
  98 #define HFCUSB_DBG_VERBOSE_USB  0x8000
  99
 100 /*
 101  * URB error codes:
 102  * Used to represent a list of values and their respective symbolic names
 103  */
 104 struct hfcusb_symbolic_list {
 105         const int num;
 106         const char *name;
 107 };
 108
 109 static struct hfcusb_symbolic_list urb_errlist[] = {
 110         {-ENOMEM, "No memory for allocation of internal structures"},
 111         {-ENOSPC, "The host controller's bandwidth is already consumed"},
 112         {-ENOENT, "URB was canceled by unlink_urb"},
 113         {-EXDEV, "ISO transfer only partially completed"},
 114         {-EAGAIN, "Too match scheduled for the future"},
 115         {-ENXIO, "URB already queued"},
 116         {-EFBIG, "Too much ISO frames requested"},
 117         {-ENOSR, "Buffer error (overrun)"},
 118         {-EPIPE, "Specified endpoint is stalled (device not responding)"},
 119         {-EOVERFLOW, "Babble (bad cable?)"},
 120         {-EPROTO, "Bit-stuff error (bad cable?)"},
 121         {-EILSEQ, "CRC/Timeout"},
 122         {-ETIMEDOUT, "NAK (device does not respond)"},
 123         {-ESHUTDOWN, "Device unplugged"},
 124         {-1, NULL}
 125 };
 126
 127
 128 /*
 129  * device dependant information to support different
 130  * ISDN Ta's using the HFC-S USB chip
 131  */
 132
 133 /* USB descriptor need to contain one of the following EndPoint combination: */
 134 #define CNF_4INT3ISO    1       // 4 INT IN, 3 ISO OUT
 135 #define CNF_3INT3ISO    2       // 3 INT IN, 3 ISO OUT
 136 #define CNF_4ISO3ISO    3       // 4 ISO IN, 3 ISO OUT
 137 #define CNF_3ISO3ISO    4       // 3 ISO IN, 3 ISO OUT
 138
 139 #define EP_NUL  1       // Endpoint at this position not allowed
 140 #define EP_NOP  2       // all type of endpoints allowed at this position
 141 #define EP_ISO  3       // Isochron endpoint mandatory at this position
 142 #define EP_BLK  4       // Bulk endpoint mandatory at this position
 143 #define EP_INT  5       // Interrupt endpoint mandatory at this position
 144
 145 /*
 146  * List of all supported endpoint configuration sets, used to find the
 147  * best matching endpoint configuration within a devices' USB descriptor.
 148  * We need at least 3 RX endpoints, and 3 TX endpoints, either
 149  * INT-in and ISO-out, or ISO-in and ISO-out)
 150  * with 4 RX endpoints even E-Channel logging is possible
 151  */
 152 static int validconf[][19] = {
 153         // INT in, ISO out config
 154         {EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NOP, EP_INT,
 155          EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_NUL, EP_NUL,
 156          CNF_4INT3ISO, 2, 1},
 157         {EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_INT, EP_NUL, EP_NUL,
 158          EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_ISO, EP_NUL, EP_NUL, EP_NUL,
 159          CNF_3INT3ISO, 2, 0},
 160         // ISO in, ISO out config
 161         {EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL,
 162          EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_NOP, EP_ISO,
 163          CNF_4ISO3ISO, 2, 1},
 164         {EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL, EP_NUL,
 165          EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_ISO, EP_NUL, EP_NUL,
 166          CNF_3ISO3ISO, 2, 0},
 167         {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}        // EOL element
 168 };
 169
 170 #ifdef CONFIG_HISAX_DEBUG
 171 // string description of chosen config
 172 static char *conf_str[] = {
 173         "4 Interrupt IN + 3 Isochron OUT",
 174         "3 Interrupt IN + 3 Isochron OUT",
 175         "4 Isochron IN + 3 Isochron OUT",
 176         "3 Isochron IN + 3 Isochron OUT"
 177 };
 178 #endif
 179
 180 typedef struct {
 181         int vendor;             // vendor id
 182         int prod_id;            // product id
 183         char *vend_name;        // vendor string
 184         __u8 led_scheme;        // led display scheme
 185         signed short led_bits[8];       // array of 8 possible LED bitmask settings
 186 } vendor_data;
 187
 188 #define LED_OFF         0       // no LED support
 189 #define LED_SCHEME1     1       // LED standard scheme
 190 #define LED_SCHEME2     2       // not used yet...
 191
 192 #define LED_POWER_ON    1
 193 #define LED_POWER_OFF   2
 194 #define LED_S0_ON       3
 195 #define LED_S0_OFF      4
 196 #define LED_B1_ON       5
 197 #define LED_B1_OFF      6
 198 #define LED_B1_DATA     7
 199 #define LED_B2_ON       8
 200 #define LED_B2_OFF      9
 201 #define LED_B2_DATA     10
 202
 203 #define LED_NORMAL      0       // LEDs are normal
 204 #define LED_INVERTED    1       // LEDs are inverted
 205
 206
 207 #endif  // __HFC_USB_H__