release/src-rt-6.x.4708/linux/linux-2.6.36/drivers/ieee1394/sbp2.h

   1 /*
   2  * sbp2.h - Defines and prototypes for sbp2.c
   3  *
   4  * Copyright (C) 2000 James Goodwin, Filanet Corporation (www.filanet.com)
   5  * jamesg@filanet.com
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software Foundation,
  19  * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  20  */
  21
  22 #ifndef SBP2_H
  23 #define SBP2_H
  24
  25 #define SBP2_DEVICE_NAME                "sbp2"
  26
  27 /*
  28  * There is no transport protocol limit to the CDB length,  but we implement
  29  * a fixed length only.  16 bytes is enough for disks larger than 2 TB.
  30  */
  31 #define SBP2_MAX_CDB_SIZE               16
  32
  33 /*
  34  * SBP-2 specific definitions
  35  */
  36
  37 #define ORB_DIRECTION_WRITE_TO_MEDIA    0x0
  38 #define ORB_DIRECTION_READ_FROM_MEDIA   0x1
  39 #define ORB_DIRECTION_NO_DATA_TRANSFER  0x2
  40
  41 #define ORB_SET_NULL_PTR(v)             (((v) & 0x1) << 31)
  42 #define ORB_SET_NOTIFY(v)               (((v) & 0x1) << 31)
  43 #define ORB_SET_RQ_FMT(v)               (((v) & 0x3) << 29)
  44 #define ORB_SET_NODE_ID(v)              (((v) & 0xffff) << 16)
  45 #define ORB_SET_STATUS_FIFO_HI(v, id)   ((v) >> 32 | ORB_SET_NODE_ID(id))
  46 #define ORB_SET_STATUS_FIFO_LO(v)       ((v) & 0xffffffff)
  47 #define ORB_SET_DATA_SIZE(v)            ((v) & 0xffff)
  48 #define ORB_SET_PAGE_SIZE(v)            (((v) & 0x7) << 16)
  49 #define ORB_SET_PAGE_TABLE_PRESENT(v)   (((v) & 0x1) << 19)
  50 #define ORB_SET_MAX_PAYLOAD(v)          (((v) & 0xf) << 20)
  51 #define ORB_SET_SPEED(v)                (((v) & 0x7) << 24)
  52 #define ORB_SET_DIRECTION(v)            (((v) & 0x1) << 27)
  53
  54 struct sbp2_command_orb {
  55         u32 next_ORB_hi;
  56         u32 next_ORB_lo;
  57         u32 data_descriptor_hi;
  58         u32 data_descriptor_lo;
  59         u32 misc;
  60         u8 cdb[SBP2_MAX_CDB_SIZE];
  61 } __attribute__((packed));
  62
  63 #define SBP2_LOGIN_REQUEST              0x0
  64 #define SBP2_QUERY_LOGINS_REQUEST       0x1
  65 #define SBP2_RECONNECT_REQUEST          0x3
  66 #define SBP2_SET_PASSWORD_REQUEST       0x4
  67 #define SBP2_LOGOUT_REQUEST             0x7
  68 #define SBP2_ABORT_TASK_REQUEST         0xb
  69 #define SBP2_ABORT_TASK_SET             0xc
  70 #define SBP2_LOGICAL_UNIT_RESET         0xe
  71 #define SBP2_TARGET_RESET_REQUEST       0xf
  72
  73 #define ORB_SET_LUN(v)                  ((v) & 0xffff)
  74 #define ORB_SET_FUNCTION(v)             (((v) & 0xf) << 16)
  75 #define ORB_SET_RECONNECT(v)            (((v) & 0xf) << 20)
  76 #define ORB_SET_EXCLUSIVE(v)            ((v) ? 1 << 28 : 0)
  77 #define ORB_SET_LOGIN_RESP_LENGTH(v)    ((v) & 0xffff)
  78 #define ORB_SET_PASSWD_LENGTH(v)        (((v) & 0xffff) << 16)
  79
  80 struct sbp2_login_orb {
  81         u32 password_hi;
  82         u32 password_lo;
  83         u32 login_response_hi;
  84         u32 login_response_lo;
  85         u32 lun_misc;
  86         u32 passwd_resp_lengths;
  87         u32 status_fifo_hi;
  88         u32 status_fifo_lo;
  89 } __attribute__((packed));
  90
  91 #define RESPONSE_GET_LOGIN_ID(v)        ((v) & 0xffff)
  92 #define RESPONSE_GET_LENGTH(v)          (((v) >> 16) & 0xffff)
  93 #define RESPONSE_GET_RECONNECT_HOLD(v)  ((v) & 0xffff)
  94
  95 struct sbp2_login_response {
  96         u32 length_login_ID;
  97         u32 command_block_agent_hi;
  98         u32 command_block_agent_lo;
  99         u32 reconnect_hold;
 100 } __attribute__((packed));
 101
 102 #define ORB_SET_LOGIN_ID(v)                 ((v) & 0xffff)
 103 #define ORB_SET_QUERY_LOGINS_RESP_LENGTH(v) ((v) & 0xffff)
 104
 105 struct sbp2_query_logins_orb {
 106         u32 reserved1;
 107         u32 reserved2;
 108         u32 query_response_hi;
 109         u32 query_response_lo;
 110         u32 lun_misc;
 111         u32 reserved_resp_length;
 112         u32 status_fifo_hi;
 113         u32 status_fifo_lo;
 114 } __attribute__((packed));
 115
 116 #define RESPONSE_GET_MAX_LOGINS(v)      ((v) & 0xffff)
 117 #define RESPONSE_GET_ACTIVE_LOGINS(v)   ((RESPONSE_GET_LENGTH((v)) - 4) / 12)
 118
 119 struct sbp2_query_logins_response {
 120         u32 length_max_logins;
 121         u32 misc_IDs;
 122         u32 initiator_misc_hi;
 123         u32 initiator_misc_lo;
 124 } __attribute__((packed));
 125
 126 struct sbp2_reconnect_orb {
 127         u32 reserved1;
 128         u32 reserved2;
 129         u32 reserved3;
 130         u32 reserved4;
 131         u32 login_ID_misc;
 132         u32 reserved5;
 133         u32 status_fifo_hi;
 134         u32 status_fifo_lo;
 135 } __attribute__((packed));
 136
 137 struct sbp2_logout_orb {
 138         u32 reserved1;
 139         u32 reserved2;
 140         u32 reserved3;
 141         u32 reserved4;
 142         u32 login_ID_misc;
 143         u32 reserved5;
 144         u32 status_fifo_hi;
 145         u32 status_fifo_lo;
 146 } __attribute__((packed));
 147
 148 struct sbp2_unrestricted_page_table {
 149         __be32 high;
 150         __be32 low;
 151 };
 152
 153 #define RESP_STATUS_REQUEST_COMPLETE            0x0
 154 #define RESP_STATUS_TRANSPORT_FAILURE           0x1
 155 #define RESP_STATUS_ILLEGAL_REQUEST             0x2
 156 #define RESP_STATUS_VENDOR_DEPENDENT            0x3
 157
 158 #define SBP2_STATUS_NO_ADDITIONAL_INFO          0x0
 159 #define SBP2_STATUS_REQ_TYPE_NOT_SUPPORTED      0x1
 160 #define SBP2_STATUS_SPEED_NOT_SUPPORTED         0x2
 161 #define SBP2_STATUS_PAGE_SIZE_NOT_SUPPORTED     0x3
 162 #define SBP2_STATUS_ACCESS_DENIED               0x4
 163 #define SBP2_STATUS_LU_NOT_SUPPORTED            0x5
 164 #define SBP2_STATUS_MAX_PAYLOAD_TOO_SMALL       0x6
 165 #define SBP2_STATUS_RESOURCES_UNAVAILABLE       0x8
 166 #define SBP2_STATUS_FUNCTION_REJECTED           0x9
 167 #define SBP2_STATUS_LOGIN_ID_NOT_RECOGNIZED     0xa
 168 #define SBP2_STATUS_DUMMY_ORB_COMPLETED         0xb
 169 #define SBP2_STATUS_REQUEST_ABORTED             0xc
 170 #define SBP2_STATUS_UNSPECIFIED_ERROR           0xff
 171
 172 #define SFMT_CURRENT_ERROR                      0x0
 173 #define SFMT_DEFERRED_ERROR                     0x1
 174 #define SFMT_VENDOR_DEPENDENT_STATUS            0x3
 175
 176 #define STATUS_GET_SRC(v)                       (((v) >> 30) & 0x3)
 177 #define STATUS_GET_RESP(v)                      (((v) >> 28) & 0x3)
 178 #define STATUS_GET_LEN(v)                       (((v) >> 24) & 0x7)
 179 #define STATUS_GET_SBP_STATUS(v)                (((v) >> 16) & 0xff)
 180 #define STATUS_GET_ORB_OFFSET_HI(v)             ((v) & 0x0000ffff)
 181 #define STATUS_TEST_DEAD(v)                     ((v) & 0x08000000)
 182 /* test 'resp' | 'dead' | 'sbp2_status' */
 183 #define STATUS_TEST_RDS(v)                      ((v) & 0x38ff0000)
 184
 185 struct sbp2_status_block {
 186         u32 ORB_offset_hi_misc;
 187         u32 ORB_offset_lo;
 188         u8 command_set_dependent[24];
 189 } __attribute__((packed));
 190
 191
 192 /*
 193  * SBP2 related configuration ROM definitions
 194  */
 195
 196 #define SBP2_UNIT_DIRECTORY_OFFSET_KEY          0xd1
 197 #define SBP2_CSR_OFFSET_KEY                     0x54
 198 #define SBP2_UNIT_SPEC_ID_KEY                   0x12
 199 #define SBP2_UNIT_SW_VERSION_KEY                0x13
 200 #define SBP2_COMMAND_SET_SPEC_ID_KEY            0x38
 201 #define SBP2_COMMAND_SET_KEY                    0x39
 202 #define SBP2_UNIT_CHARACTERISTICS_KEY           0x3a
 203 #define SBP2_DEVICE_TYPE_AND_LUN_KEY            0x14
 204 #define SBP2_FIRMWARE_REVISION_KEY              0x3c
 205
 206 #define SBP2_AGENT_STATE_OFFSET                 0x00ULL
 207 #define SBP2_AGENT_RESET_OFFSET                 0x04ULL
 208 #define SBP2_ORB_POINTER_OFFSET                 0x08ULL
 209 #define SBP2_DOORBELL_OFFSET                    0x10ULL
 210 #define SBP2_UNSOLICITED_STATUS_ENABLE_OFFSET   0x14ULL
 211 #define SBP2_UNSOLICITED_STATUS_VALUE           0xf
 212
 213 #define SBP2_BUSY_TIMEOUT_ADDRESS               0xfffff0000210ULL
 214 /* biggest possible value for Single Phase Retry count is 0xf */
 215 #define SBP2_BUSY_TIMEOUT_VALUE                 0xf
 216
 217 #define SBP2_AGENT_RESET_DATA                   0xf
 218
 219 #define SBP2_UNIT_SPEC_ID_ENTRY                 0x0000609e
 220 #define SBP2_SW_VERSION_ENTRY                   0x00010483
 221
 222 /*
 223  * The default maximum s/g segment size of a FireWire controller is
 224  * usually 0x10000, but SBP-2 only allows 0xffff. Since buffers have to
 225  * be quadlet-aligned, we set the length limit to 0xffff & ~3.
 226  */
 227 #define SBP2_MAX_SEG_SIZE                       0xfffc
 228
 229 /*
 230  * There is no real limitation of the queue depth (i.e. length of the linked
 231  * list of command ORBs) at the target. The chosen depth is merely an
 232  * implementation detail of the sbp2 driver.
 233  */
 234 #define SBP2_MAX_CMDS                           8
 235
 236 #define SBP2_SCSI_STATUS_GOOD                   0x0
 237 #define SBP2_SCSI_STATUS_CHECK_CONDITION        0x2
 238 #define SBP2_SCSI_STATUS_CONDITION_MET          0x4
 239 #define SBP2_SCSI_STATUS_BUSY                   0x8
 240 #define SBP2_SCSI_STATUS_RESERVATION_CONFLICT   0x18
 241 #define SBP2_SCSI_STATUS_COMMAND_TERMINATED     0x22
 242 #define SBP2_SCSI_STATUS_SELECTION_TIMEOUT      0xff
 243
 244
 245 /*
 246  * Representations of commands and devices
 247  */
 248
 249 /* Per SCSI command */
 250 struct sbp2_command_info {
 251         struct list_head list;
 252         struct sbp2_command_orb command_orb;
 253         dma_addr_t command_orb_dma;
 254         struct scsi_cmnd *Current_SCpnt;
 255         void (*Current_done)(struct scsi_cmnd *);
 256
 257         /* Also need s/g structure for each sbp2 command */
 258         struct sbp2_unrestricted_page_table
 259                 scatter_gather_element[SG_ALL] __attribute__((aligned(8)));
 260         dma_addr_t sge_dma;
 261 };
 262
 263 /* Per FireWire host */
 264 struct sbp2_fwhost_info {
 265         struct hpsb_host *host;
 266         struct list_head logical_units;
 267 };
 268
 269 /* Per logical unit */
 270 struct sbp2_lu {
 271         /* Operation request blocks */
 272         struct sbp2_command_orb *last_orb;
 273         dma_addr_t last_orb_dma;
 274         struct sbp2_login_orb *login_orb;
 275         dma_addr_t login_orb_dma;
 276         struct sbp2_login_response *login_response;
 277         dma_addr_t login_response_dma;
 278         struct sbp2_query_logins_orb *query_logins_orb;
 279         dma_addr_t query_logins_orb_dma;
 280         struct sbp2_query_logins_response *query_logins_response;
 281         dma_addr_t query_logins_response_dma;
 282         struct sbp2_reconnect_orb *reconnect_orb;
 283         dma_addr_t reconnect_orb_dma;
 284         struct sbp2_logout_orb *logout_orb;
 285         dma_addr_t logout_orb_dma;
 286         struct sbp2_status_block status_block;
 287
 288         /* How to talk to the unit */
 289         u64 management_agent_addr;
 290         u64 command_block_agent_addr;
 291         u32 speed_code;
 292         u32 max_payload_size;
 293         u16 lun;
 294
 295         /* Address for the unit to write status blocks to */
 296         u64 status_fifo_addr;
 297
 298         /* Waitqueue flag for logins, reconnects, logouts, query logins */
 299         unsigned int access_complete:1;
 300
 301         /* Pool of command ORBs for this logical unit */
 302         spinlock_t cmd_orb_lock;
 303         struct list_head cmd_orb_inuse;
 304         struct list_head cmd_orb_completed;
 305
 306         /* Backlink to FireWire host; list of units attached to the host */
 307         struct sbp2_fwhost_info *hi;
 308         struct list_head lu_list;
 309
 310         /* IEEE 1394 core's device representations */
 311         struct node_entry *ne;
 312         struct unit_directory *ud;
 313
 314         /* SCSI core's device representations */
 315         struct scsi_device *sdev;
 316         struct Scsi_Host *shost;
 317
 318         /* Device specific workarounds/brokeness */
 319         unsigned workarounds;
 320
 321         /* Connection state */
 322         atomic_t state;
 323
 324         /* For deferred requests to the fetch agent */
 325         struct work_struct protocol_work;
 326 };
 327
 328 /* For use in sbp2_lu.state */
 329 enum sbp2lu_state_types {
 330         SBP2LU_STATE_RUNNING,           /* all normal */
 331         SBP2LU_STATE_IN_RESET,          /* between bus reset and reconnect */
 332         SBP2LU_STATE_IN_SHUTDOWN        /* when sbp2_remove was called */
 333 };
 334
 335 /* For use in sbp2_lu.workarounds and in the corresponding
 336  * module load parameter */
 337 #define SBP2_WORKAROUND_128K_MAX_TRANS  0x1
 338 #define SBP2_WORKAROUND_INQUIRY_36      0x2
 339 #define SBP2_WORKAROUND_MODE_SENSE_8    0x4
 340 #define SBP2_WORKAROUND_FIX_CAPACITY    0x8
 341 #define SBP2_WORKAROUND_DELAY_INQUIRY   0x10
 342 #define SBP2_INQUIRY_DELAY              12
 343 #define SBP2_WORKAROUND_POWER_CONDITION 0x20
 344 #define SBP2_WORKAROUND_OVERRIDE        0x100
 345
 346 #endif /* SBP2_H */