release/src-rt-6.x.4708/linux/linux-2.6.36/drivers/i2c/busses/i2c-s3c2410.c

   1 /* linux/drivers/i2c/busses/i2c-s3c2410.c
   2  *
   3  * Copyright (C) 2004,2005,2009 Simtec Electronics
   4  *      Ben Dooks <ben@simtec.co.uk>
   5  *
   6  * S3C2410 I2C Controller
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License as published by
  10  * the Free Software Foundation; either version 2 of the License, or
  11  * (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  21 */
  22
  23 #include <linux/kernel.h>
  24 #include <linux/module.h>
  25
  26 #include <linux/i2c.h>
  27 #include <linux/i2c-id.h>
  28 #include <linux/init.h>
  29 #include <linux/time.h>
  30 #include <linux/interrupt.h>
  31 #include <linux/delay.h>
  32 #include <linux/errno.h>
  33 #include <linux/err.h>
  34 #include <linux/platform_device.h>
  35 #include <linux/clk.h>
  36 #include <linux/cpufreq.h>
  37 #include <linux/slab.h>
  38 #include <linux/io.h>
  39
  40 #include <asm/irq.h>
  41
  42 #include <plat/regs-iic.h>
  43 #include <plat/iic.h>
  44
  45 /* i2c controller state */
  46
  47 enum s3c24xx_i2c_state {
  48         STATE_IDLE,
  49         STATE_START,
  50         STATE_READ,
  51         STATE_WRITE,
  52         STATE_STOP
  53 };
  54
  55 enum s3c24xx_i2c_type {
  56         TYPE_S3C2410,
  57         TYPE_S3C2440,
  58 };
  59
  60 struct s3c24xx_i2c {
  61         spinlock_t              lock;
  62         wait_queue_head_t       wait;
  63         unsigned int            suspended:1;
  64
  65         struct i2c_msg          *msg;
  66         unsigned int            msg_num;
  67         unsigned int            msg_idx;
  68         unsigned int            msg_ptr;
  69
  70         unsigned int            tx_setup;
  71         unsigned int            irq;
  72
  73         enum s3c24xx_i2c_state  state;
  74         unsigned long           clkrate;
  75
  76         void __iomem            *regs;
  77         struct clk              *clk;
  78         struct device           *dev;
  79         struct resource         *ioarea;
  80         struct i2c_adapter      adap;
  81
  82 #ifdef CONFIG_CPU_FREQ
  83         struct notifier_block   freq_transition;
  84 #endif
  85 };
  86
  87 /* default platform data removed, dev should always carry data. */
  88
  89 /* s3c24xx_i2c_is2440()
  90  *
  91  * return true is this is an s3c2440
  92 */
  93
  94 static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
  95 {
  96         struct platform_device *pdev = to_platform_device(i2c->dev);
  97         enum s3c24xx_i2c_type type;
  98
  99         type = platform_get_device_id(pdev)->driver_data;
 100         return type == TYPE_S3C2440;
 101 }
 102
 103 /* s3c24xx_i2c_master_complete
 104  *
 105  * complete the message and wake up the caller, using the given return code,
 106  * or zero to mean ok.
 107 */
 108
 109 static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret)
 110 {
 111         dev_dbg(i2c->dev, "master_complete %d\n", ret);
 112
 113         i2c->msg_ptr = 0;
 114         i2c->msg = NULL;
 115         i2c->msg_idx++;
 116         i2c->msg_num = 0;
 117         if (ret)
 118                 i2c->msg_idx = ret;
 119
 120         wake_up(&i2c->wait);
 121 }
 122
 123 static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c)
 124 {
 125         unsigned long tmp;
 126
 127         tmp = readl(i2c->regs + S3C2410_IICCON);
 128         writel(tmp & ~S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
 129 }
 130
 131 static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c)
 132 {
 133         unsigned long tmp;
 134
 135         tmp = readl(i2c->regs + S3C2410_IICCON);
 136         writel(tmp | S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
 137 }
 138
 139 /* irq enable/disable functions */
 140
 141 static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c)
 142 {
 143         unsigned long tmp;
 144
 145         tmp = readl(i2c->regs + S3C2410_IICCON);
 146         writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
 147 }
 148
 149 static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c)
 150 {
 151         unsigned long tmp;
 152
 153         tmp = readl(i2c->regs + S3C2410_IICCON);
 154         writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
 155 }
 156
 157
 158 /* s3c24xx_i2c_message_start
 159  *
 160  * put the start of a message onto the bus
 161 */
 162
 163 static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
 164                                       struct i2c_msg *msg)
 165 {
 166         unsigned int addr = (msg->addr & 0x7f) << 1;
 167         unsigned long stat;
 168         unsigned long iiccon;
 169
 170         stat = 0;
 171         stat |=  S3C2410_IICSTAT_TXRXEN;
 172
 173         if (msg->flags & I2C_M_RD) {
 174                 stat |= S3C2410_IICSTAT_MASTER_RX;
 175                 addr |= 1;
 176         } else
 177                 stat |= S3C2410_IICSTAT_MASTER_TX;
 178
 179         if (msg->flags & I2C_M_REV_DIR_ADDR)
 180                 addr ^= 1;
 181
 182         /* todo - check for wether ack wanted or not */
 183         s3c24xx_i2c_enable_ack(i2c);
 184
 185         iiccon = readl(i2c->regs + S3C2410_IICCON);
 186         writel(stat, i2c->regs + S3C2410_IICSTAT);
 187
 188         dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr);
 189         writeb(addr, i2c->regs + S3C2410_IICDS);
 190
 191         /* delay here to ensure the data byte has gotten onto the bus
 192          * before the transaction is started */
 193
 194         ndelay(i2c->tx_setup);
 195
 196         dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon);
 197         writel(iiccon, i2c->regs + S3C2410_IICCON);
 198
 199         stat |= S3C2410_IICSTAT_START;
 200         writel(stat, i2c->regs + S3C2410_IICSTAT);
 201 }
 202
 203 static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
 204 {
 205         unsigned long iicstat = readl(i2c->regs + S3C2410_IICSTAT);
 206
 207         dev_dbg(i2c->dev, "STOP\n");
 208
 209         /* stop the transfer */
 210         iicstat &= ~S3C2410_IICSTAT_START;
 211         writel(iicstat, i2c->regs + S3C2410_IICSTAT);
 212
 213         i2c->state = STATE_STOP;
 214
 215         s3c24xx_i2c_master_complete(i2c, ret);
 216         s3c24xx_i2c_disable_irq(i2c);
 217 }
 218
 219 /* helper functions to determine the current state in the set of
 220  * messages we are sending */
 221
 222 /* is_lastmsg()
 223  *
 224  * returns TRUE if the current message is the last in the set
 225 */
 226
 227 static inline int is_lastmsg(struct s3c24xx_i2c *i2c)
 228 {
 229         return i2c->msg_idx >= (i2c->msg_num - 1);
 230 }
 231
 232 /* is_msglast
 233  *
 234  * returns TRUE if we this is the last byte in the current message
 235 */
 236
 237 static inline int is_msglast(struct s3c24xx_i2c *i2c)
 238 {
 239         return i2c->msg_ptr == i2c->msg->len-1;
 240 }
 241
 242 /* is_msgend
 243  *
 244  * returns TRUE if we reached the end of the current message
 245 */
 246
 247 static inline int is_msgend(struct s3c24xx_i2c *i2c)
 248 {
 249         return i2c->msg_ptr >= i2c->msg->len;
 250 }
 251
 252 /* i2s_s3c_irq_nextbyte
 253  *
 254  * process an interrupt and work out what to do
 255  */
 256
 257 static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
 258 {
 259         unsigned long tmp;
 260         unsigned char byte;
 261         int ret = 0;
 262
 263         switch (i2c->state) {
 264
 265         case STATE_IDLE:
 266                 dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __func__);
 267                 goto out;
 268                 break;
 269
 270         case STATE_STOP:
 271                 dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__);
 272                 s3c24xx_i2c_disable_irq(i2c);
 273                 goto out_ack;
 274
 275         case STATE_START:
 276                 /* last thing we did was send a start condition on the
 277                  * bus, or started a new i2c message
 278                  */
 279
 280                 if (iicstat & S3C2410_IICSTAT_LASTBIT &&
 281                     !(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
 282                         /* ack was not received... */
 283
 284                         dev_dbg(i2c->dev, "ack was not received\n");
 285                         s3c24xx_i2c_stop(i2c, -ENXIO);
 286                         goto out_ack;
 287                 }
 288
 289                 if (i2c->msg->flags & I2C_M_RD)
 290                         i2c->state = STATE_READ;
 291                 else
 292                         i2c->state = STATE_WRITE;
 293
 294                 /* terminate the transfer if there is nothing to do
 295                  * as this is used by the i2c probe to find devices. */
 296
 297                 if (is_lastmsg(i2c) && i2c->msg->len == 0) {
 298                         s3c24xx_i2c_stop(i2c, 0);
 299                         goto out_ack;
 300                 }
 301
 302                 if (i2c->state == STATE_READ)
 303                         goto prepare_read;
 304
 305                 /* fall through to the write state, as we will need to
 306                  * send a byte as well */
 307
 308         case STATE_WRITE:
 309                 /* we are writing data to the device... check for the
 310                  * end of the message, and if so, work out what to do
 311                  */
 312
 313                 if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
 314                         if (iicstat & S3C2410_IICSTAT_LASTBIT) {
 315                                 dev_dbg(i2c->dev, "WRITE: No Ack\n");
 316
 317                                 s3c24xx_i2c_stop(i2c, -ECONNREFUSED);
 318                                 goto out_ack;
 319                         }
 320                 }
 321
 322  retry_write:
 323
 324                 if (!is_msgend(i2c)) {
 325                         byte = i2c->msg->buf[i2c->msg_ptr++];
 326                         writeb(byte, i2c->regs + S3C2410_IICDS);
 327
 328                         /* delay after writing the byte to allow the
 329                          * data setup time on the bus, as writing the
 330                          * data to the register causes the first bit
 331                          * to appear on SDA, and SCL will change as
 332                          * soon as the interrupt is acknowledged */
 333
 334                         ndelay(i2c->tx_setup);
 335
 336                 } else if (!is_lastmsg(i2c)) {
 337                         /* we need to go to the next i2c message */
 338
 339                         dev_dbg(i2c->dev, "WRITE: Next Message\n");
 340
 341                         i2c->msg_ptr = 0;
 342                         i2c->msg_idx++;
 343                         i2c->msg++;
 344
 345                         /* check to see if we need to do another message */
 346                         if (i2c->msg->flags & I2C_M_NOSTART) {
 347
 348                                 if (i2c->msg->flags & I2C_M_RD) {
 349                                         /* cannot do this, the controller
 350                                          * forces us to send a new START
 351                                          * when we change direction */
 352
 353                                         s3c24xx_i2c_stop(i2c, -EINVAL);
 354                                 }
 355
 356                                 goto retry_write;
 357                         } else {
 358                                 /* send the new start */
 359                                 s3c24xx_i2c_message_start(i2c, i2c->msg);
 360                                 i2c->state = STATE_START;
 361                         }
 362
 363                 } else {
 364                         /* send stop */
 365
 366                         s3c24xx_i2c_stop(i2c, 0);
 367                 }
 368                 break;
 369
 370         case STATE_READ:
 371                 /* we have a byte of data in the data register, do
 372                  * something with it, and then work out wether we are
 373                  * going to do any more read/write
 374                  */
 375
 376                 byte = readb(i2c->regs + S3C2410_IICDS);
 377                 i2c->msg->buf[i2c->msg_ptr++] = byte;
 378
 379  prepare_read:
 380                 if (is_msglast(i2c)) {
 381                         /* last byte of buffer */
 382
 383                         if (is_lastmsg(i2c))
 384                                 s3c24xx_i2c_disable_ack(i2c);
 385
 386                 } else if (is_msgend(i2c)) {
 387                         /* ok, we've read the entire buffer, see if there
 388                          * is anything else we need to do */
 389
 390                         if (is_lastmsg(i2c)) {
 391                                 /* last message, send stop and complete */
 392                                 dev_dbg(i2c->dev, "READ: Send Stop\n");
 393
 394                                 s3c24xx_i2c_stop(i2c, 0);
 395                         } else {
 396                                 /* go to the next transfer */
 397                                 dev_dbg(i2c->dev, "READ: Next Transfer\n");
 398
 399                                 i2c->msg_ptr = 0;
 400                                 i2c->msg_idx++;
 401                                 i2c->msg++;
 402                         }
 403                 }
 404
 405                 break;
 406         }
 407
 408         /* acknowlegde the IRQ and get back on with the work */
 409
 410  out_ack:
 411         tmp = readl(i2c->regs + S3C2410_IICCON);
 412         tmp &= ~S3C2410_IICCON_IRQPEND;
 413         writel(tmp, i2c->regs + S3C2410_IICCON);
 414  out:
 415         return ret;
 416 }
 417
 418 /* s3c24xx_i2c_irq
 419  *
 420  * top level IRQ servicing routine
 421 */
 422
 423 static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id)
 424 {
 425         struct s3c24xx_i2c *i2c = dev_id;
 426         unsigned long status;
 427         unsigned long tmp;
 428
 429         status = readl(i2c->regs + S3C2410_IICSTAT);
 430
 431         if (status & S3C2410_IICSTAT_ARBITR) {
 432                 /* deal with arbitration loss */
 433                 dev_err(i2c->dev, "deal with arbitration loss\n");
 434         }
 435
 436         if (i2c->state == STATE_IDLE) {
 437                 dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n");
 438
 439                 tmp = readl(i2c->regs + S3C2410_IICCON);
 440                 tmp &= ~S3C2410_IICCON_IRQPEND;
 441                 writel(tmp, i2c->regs +  S3C2410_IICCON);
 442                 goto out;
 443         }
 444
 445         /* pretty much this leaves us with the fact that we've
 446          * transmitted or received whatever byte we last sent */
 447
 448         i2s_s3c_irq_nextbyte(i2c, status);
 449
 450  out:
 451         return IRQ_HANDLED;
 452 }
 453
 454
 455 /* s3c24xx_i2c_set_master
 456  *
 457  * get the i2c bus for a master transaction
 458 */
 459
 460 static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
 461 {
 462         unsigned long iicstat;
 463         int timeout = 400;
 464
 465         while (timeout-- > 0) {
 466                 iicstat = readl(i2c->regs + S3C2410_IICSTAT);
 467
 468                 if (!(iicstat & S3C2410_IICSTAT_BUSBUSY))
 469                         return 0;
 470
 471                 msleep(1);
 472         }
 473
 474         return -ETIMEDOUT;
 475 }
 476
 477 /* s3c24xx_i2c_doxfer
 478  *
 479  * this starts an i2c transfer
 480 */
 481
 482 static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
 483                               struct i2c_msg *msgs, int num)
 484 {
 485         unsigned long iicstat, timeout;
 486         int spins = 20;
 487         int ret;
 488
 489         if (i2c->suspended)
 490                 return -EIO;
 491
 492         ret = s3c24xx_i2c_set_master(i2c);
 493         if (ret != 0) {
 494                 dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
 495                 ret = -EAGAIN;
 496                 goto out;
 497         }
 498
 499         spin_lock_irq(&i2c->lock);
 500
 501         i2c->msg     = msgs;
 502         i2c->msg_num = num;
 503         i2c->msg_ptr = 0;
 504         i2c->msg_idx = 0;
 505         i2c->state   = STATE_START;
 506
 507         s3c24xx_i2c_enable_irq(i2c);
 508         s3c24xx_i2c_message_start(i2c, msgs);
 509         spin_unlock_irq(&i2c->lock);
 510
 511         timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
 512
 513         ret = i2c->msg_idx;
 514
 515         /* having these next two as dev_err() makes life very
 516          * noisy when doing an i2cdetect */
 517
 518         if (timeout == 0)
 519                 dev_dbg(i2c->dev, "timeout\n");
 520         else if (ret != num)
 521                 dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
 522
 523         /* ensure the stop has been through the bus */
 524
 525         dev_dbg(i2c->dev, "waiting for bus idle\n");
 526
 527         /* first, try busy waiting briefly */
 528         do {
 529                 iicstat = readl(i2c->regs + S3C2410_IICSTAT);
 530         } while ((iicstat & S3C2410_IICSTAT_START) && --spins);
 531
 532         /* if that timed out sleep */
 533         if (!spins) {
 534                 msleep(1);
 535                 iicstat = readl(i2c->regs + S3C2410_IICSTAT);
 536         }
 537
 538         if (iicstat & S3C2410_IICSTAT_START)
 539                 dev_warn(i2c->dev, "timeout waiting for bus idle\n");
 540
 541  out:
 542         return ret;
 543 }
 544
 545 /* s3c24xx_i2c_xfer
 546  *
 547  * first port of call from the i2c bus code when an message needs
 548  * transferring across the i2c bus.
 549 */
 550
 551 static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
 552                         struct i2c_msg *msgs, int num)
 553 {
 554         struct s3c24xx_i2c *i2c = (struct s3c24xx_i2c *)adap->algo_data;
 555         int retry;
 556         int ret;
 557
 558         for (retry = 0; retry < adap->retries; retry++) {
 559
 560                 ret = s3c24xx_i2c_doxfer(i2c, msgs, num);
 561
 562                 if (ret != -EAGAIN)
 563                         return ret;
 564
 565                 dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
 566
 567                 udelay(100);
 568         }
 569
 570         return -EREMOTEIO;
 571 }
 572
 573 /* declare our i2c functionality */
 574 static u32 s3c24xx_i2c_func(struct i2c_adapter *adap)
 575 {
 576         return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
 577 }
 578
 579 /* i2c bus registration info */
 580
 581 static const struct i2c_algorithm s3c24xx_i2c_algorithm = {
 582         .master_xfer            = s3c24xx_i2c_xfer,
 583         .functionality          = s3c24xx_i2c_func,
 584 };
 585
 586 /* s3c24xx_i2c_calcdivisor
 587  *
 588  * return the divisor settings for a given frequency
 589 */
 590
 591 static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted,
 592                                    unsigned int *div1, unsigned int *divs)
 593 {
 594         unsigned int calc_divs = clkin / wanted;
 595         unsigned int calc_div1;
 596
 597         if (calc_divs > (16*16))
 598                 calc_div1 = 512;
 599         else
 600                 calc_div1 = 16;
 601
 602         calc_divs += calc_div1-1;
 603         calc_divs /= calc_div1;
 604
 605         if (calc_divs == 0)
 606                 calc_divs = 1;
 607         if (calc_divs > 17)
 608                 calc_divs = 17;
 609
 610         *divs = calc_divs;
 611         *div1 = calc_div1;
 612
 613         return clkin / (calc_divs * calc_div1);
 614 }
 615
 616 /* s3c24xx_i2c_clockrate
 617  *
 618  * work out a divisor for the user requested frequency setting,
 619  * either by the requested frequency, or scanning the acceptable
 620  * range of frequencies until something is found
 621 */
 622
 623 static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
 624 {
 625         struct s3c2410_platform_i2c *pdata = i2c->dev->platform_data;
 626         unsigned long clkin = clk_get_rate(i2c->clk);
 627         unsigned int divs, div1;
 628         unsigned long target_frequency;
 629         u32 iiccon;
 630         int freq;
 631
 632         i2c->clkrate = clkin;
 633         clkin /= 1000;          /* clkin now in KHz */
 634
 635         dev_dbg(i2c->dev, "pdata desired frequency %lu\n", pdata->frequency);
 636
 637         target_frequency = pdata->frequency ? pdata->frequency : 100000;
 638
 639         target_frequency /= 1000; /* Target frequency now in KHz */
 640
 641         freq = s3c24xx_i2c_calcdivisor(clkin, target_frequency, &div1, &divs);
 642
 643         if (freq > target_frequency) {
 644                 dev_err(i2c->dev,
 645                         "Unable to achieve desired frequency %luKHz."   \
 646                         " Lowest achievable %dKHz\n", target_frequency, freq);
 647                 return -EINVAL;
 648         }
 649
 650         *got = freq;
 651
 652         iiccon = readl(i2c->regs + S3C2410_IICCON);
 653         iiccon &= ~(S3C2410_IICCON_SCALEMASK | S3C2410_IICCON_TXDIV_512);
 654         iiccon |= (divs-1);
 655
 656         if (div1 == 512)
 657                 iiccon |= S3C2410_IICCON_TXDIV_512;
 658
 659         writel(iiccon, i2c->regs + S3C2410_IICCON);
 660
 661         if (s3c24xx_i2c_is2440(i2c)) {
 662                 unsigned long sda_delay;
 663
 664                 if (pdata->sda_delay) {
 665                         sda_delay = clkin * pdata->sda_delay;
 666                         sda_delay = DIV_ROUND_UP(sda_delay, 1000000);
 667                         sda_delay = DIV_ROUND_UP(sda_delay, 5);
 668                         if (sda_delay > 3)
 669                                 sda_delay = 3;
 670                         sda_delay |= S3C2410_IICLC_FILTER_ON;
 671                 } else
 672                         sda_delay = 0;
 673
 674                 dev_dbg(i2c->dev, "IICLC=%08lx\n", sda_delay);
 675                 writel(sda_delay, i2c->regs + S3C2440_IICLC);
 676         }
 677
 678         return 0;
 679 }
 680
 681 #ifdef CONFIG_CPU_FREQ
 682
 683 #define freq_to_i2c(_n) container_of(_n, struct s3c24xx_i2c, freq_transition)
 684
 685 static int s3c24xx_i2c_cpufreq_transition(struct notifier_block *nb,
 686                                           unsigned long val, void *data)
 687 {
 688         struct s3c24xx_i2c *i2c = freq_to_i2c(nb);
 689         unsigned long flags;
 690         unsigned int got;
 691         int delta_f;
 692         int ret;
 693
 694         delta_f = clk_get_rate(i2c->clk) - i2c->clkrate;
 695
 696         /* if we're post-change and the input clock has slowed down
 697          * or at pre-change and the clock is about to speed up, then
 698          * adjust our clock rate. <0 is slow, >0 speedup.
 699          */
 700
 701         if ((val == CPUFREQ_POSTCHANGE && delta_f < 0) ||
 702             (val == CPUFREQ_PRECHANGE && delta_f > 0)) {
 703                 spin_lock_irqsave(&i2c->lock, flags);
 704                 ret = s3c24xx_i2c_clockrate(i2c, &got);
 705                 spin_unlock_irqrestore(&i2c->lock, flags);
 706
 707                 if (ret < 0)
 708                         dev_err(i2c->dev, "cannot find frequency\n");
 709                 else
 710                         dev_info(i2c->dev, "setting freq %d\n", got);
 711         }
 712
 713         return 0;
 714 }
 715
 716 static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
 717 {
 718         i2c->freq_transition.notifier_call = s3c24xx_i2c_cpufreq_transition;
 719
 720         return cpufreq_register_notifier(&i2c->freq_transition,
 721                                          CPUFREQ_TRANSITION_NOTIFIER);
 722 }
 723
 724 static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
 725 {
 726         cpufreq_unregister_notifier(&i2c->freq_transition,
 727                                     CPUFREQ_TRANSITION_NOTIFIER);
 728 }
 729
 730 #else
 731 static inline int s3c24xx_i2c_register_cpufreq(struct s3c24xx_i2c *i2c)
 732 {
 733         return 0;
 734 }
 735
 736 static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
 737 {
 738 }
 739 #endif
 740
 741 /* s3c24xx_i2c_init
 742  *
 743  * initialise the controller, set the IO lines and frequency
 744 */
 745
 746 static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 747 {
 748         unsigned long iicon = S3C2410_IICCON_IRQEN | S3C2410_IICCON_ACKEN;
 749         struct s3c2410_platform_i2c *pdata;
 750         unsigned int freq;
 751
 752         /* get the plafrom data */
 753
 754         pdata = i2c->dev->platform_data;
 755
 756         /* inititalise the gpio */
 757
 758         if (pdata->cfg_gpio)
 759                 pdata->cfg_gpio(to_platform_device(i2c->dev));
 760
 761         /* write slave address */
 762
 763         writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD);
 764
 765         dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
 766
 767         writel(iicon, i2c->regs + S3C2410_IICCON);
 768
 769         /* we need to work out the divisors for the clock... */
 770
 771         if (s3c24xx_i2c_clockrate(i2c, &freq) != 0) {
 772                 writel(0, i2c->regs + S3C2410_IICCON);
 773                 dev_err(i2c->dev, "cannot meet bus frequency required\n");
 774                 return -EINVAL;
 775         }
 776
 777         /* todo - check that the i2c lines aren't being dragged anywhere */
 778
 779         dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
 780         dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon);
 781
 782         return 0;
 783 }
 784
 785 /* s3c24xx_i2c_probe
 786  *
 787  * called by the bus driver when a suitable device is found
 788 */
 789
 790 static int s3c24xx_i2c_probe(struct platform_device *pdev)
 791 {
 792         struct s3c24xx_i2c *i2c;
 793         struct s3c2410_platform_i2c *pdata;
 794         struct resource *res;
 795         int ret;
 796
 797         pdata = pdev->dev.platform_data;
 798         if (!pdata) {
 799                 dev_err(&pdev->dev, "no platform data\n");
 800                 return -EINVAL;
 801         }
 802
 803         i2c = kzalloc(sizeof(struct s3c24xx_i2c), GFP_KERNEL);
 804         if (!i2c) {
 805                 dev_err(&pdev->dev, "no memory for state\n");
 806                 return -ENOMEM;
 807         }
 808
 809         strlcpy(i2c->adap.name, "s3c2410-i2c", sizeof(i2c->adap.name));
 810         i2c->adap.owner   = THIS_MODULE;
 811         i2c->adap.algo    = &s3c24xx_i2c_algorithm;
 812         i2c->adap.retries = 2;
 813         i2c->adap.class   = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 814         i2c->tx_setup     = 50;
 815
 816         spin_lock_init(&i2c->lock);
 817         init_waitqueue_head(&i2c->wait);
 818
 819         /* find the clock and enable it */
 820
 821         i2c->dev = &pdev->dev;
 822         i2c->clk = clk_get(&pdev->dev, "i2c");
 823         if (IS_ERR(i2c->clk)) {
 824                 dev_err(&pdev->dev, "cannot get clock\n");
 825                 ret = -ENOENT;
 826                 goto err_noclk;
 827         }
 828
 829         dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
 830
 831         clk_enable(i2c->clk);
 832
 833         /* map the registers */
 834
 835         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 836         if (res == NULL) {
 837                 dev_err(&pdev->dev, "cannot find IO resource\n");
 838                 ret = -ENOENT;
 839                 goto err_clk;
 840         }
 841
 842         i2c->ioarea = request_mem_region(res->start, resource_size(res),
 843                                          pdev->name);
 844
 845         if (i2c->ioarea == NULL) {
 846                 dev_err(&pdev->dev, "cannot request IO\n");
 847                 ret = -ENXIO;
 848                 goto err_clk;
 849         }
 850
 851         i2c->regs = ioremap(res->start, resource_size(res));
 852
 853         if (i2c->regs == NULL) {
 854                 dev_err(&pdev->dev, "cannot map IO\n");
 855                 ret = -ENXIO;
 856                 goto err_ioarea;
 857         }
 858
 859         dev_dbg(&pdev->dev, "registers %p (%p, %p)\n",
 860                 i2c->regs, i2c->ioarea, res);
 861
 862         /* setup info block for the i2c core */
 863
 864         i2c->adap.algo_data = i2c;
 865         i2c->adap.dev.parent = &pdev->dev;
 866
 867         /* initialise the i2c controller */
 868
 869         ret = s3c24xx_i2c_init(i2c);
 870         if (ret != 0)
 871                 goto err_iomap;
 872
 873         /* find the IRQ for this unit (note, this relies on the init call to
 874          * ensure no current IRQs pending
 875          */
 876
 877         i2c->irq = ret = platform_get_irq(pdev, 0);
 878         if (ret <= 0) {
 879                 dev_err(&pdev->dev, "cannot find IRQ\n");
 880                 goto err_iomap;
 881         }
 882
 883         ret = request_irq(i2c->irq, s3c24xx_i2c_irq, IRQF_DISABLED,
 884                           dev_name(&pdev->dev), i2c);
 885
 886         if (ret != 0) {
 887                 dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
 888                 goto err_iomap;
 889         }
 890
 891         ret = s3c24xx_i2c_register_cpufreq(i2c);
 892         if (ret < 0) {
 893                 dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
 894                 goto err_irq;
 895         }
 896
 897         /* Note, previous versions of the driver used i2c_add_adapter()
 898          * to add the bus at any number. We now pass the bus number via
 899          * the platform data, so if unset it will now default to always
 900          * being bus 0.
 901          */
 902
 903         i2c->adap.nr = pdata->bus_num;
 904
 905         ret = i2c_add_numbered_adapter(&i2c->adap);
 906         if (ret < 0) {
 907                 dev_err(&pdev->dev, "failed to add bus to i2c core\n");
 908                 goto err_cpufreq;
 909         }
 910
 911         platform_set_drvdata(pdev, i2c);
 912
 913         dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
 914         return 0;
 915
 916  err_cpufreq:
 917         s3c24xx_i2c_deregister_cpufreq(i2c);
 918
 919  err_irq:
 920         free_irq(i2c->irq, i2c);
 921
 922  err_iomap:
 923         iounmap(i2c->regs);
 924
 925  err_ioarea:
 926         release_resource(i2c->ioarea);
 927         kfree(i2c->ioarea);
 928
 929  err_clk:
 930         clk_disable(i2c->clk);
 931         clk_put(i2c->clk);
 932
 933  err_noclk:
 934         kfree(i2c);
 935         return ret;
 936 }
 937
 938 /* s3c24xx_i2c_remove
 939  *
 940  * called when device is removed from the bus
 941 */
 942
 943 static int s3c24xx_i2c_remove(struct platform_device *pdev)
 944 {
 945         struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
 946
 947         s3c24xx_i2c_deregister_cpufreq(i2c);
 948
 949         i2c_del_adapter(&i2c->adap);
 950         free_irq(i2c->irq, i2c);
 951
 952         clk_disable(i2c->clk);
 953         clk_put(i2c->clk);
 954
 955         iounmap(i2c->regs);
 956
 957         release_resource(i2c->ioarea);
 958         kfree(i2c->ioarea);
 959         kfree(i2c);
 960
 961         return 0;
 962 }
 963
 964 #ifdef CONFIG_PM
 965 static int s3c24xx_i2c_suspend_noirq(struct device *dev)
 966 {
 967         struct platform_device *pdev = to_platform_device(dev);
 968         struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
 969
 970         i2c->suspended = 1;
 971
 972         return 0;
 973 }
 974
 975 static int s3c24xx_i2c_resume(struct device *dev)
 976 {
 977         struct platform_device *pdev = to_platform_device(dev);
 978         struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
 979
 980         i2c->suspended = 0;
 981         s3c24xx_i2c_init(i2c);
 982
 983         return 0;
 984 }
 985
 986 static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = {
 987         .suspend_noirq = s3c24xx_i2c_suspend_noirq,
 988         .resume = s3c24xx_i2c_resume,
 989 };
 990
 991 #define S3C24XX_DEV_PM_OPS (&s3c24xx_i2c_dev_pm_ops)
 992 #else
 993 #define S3C24XX_DEV_PM_OPS NULL
 994 #endif
 995
 996 /* device driver for platform bus bits */
 997
 998 static struct platform_device_id s3c24xx_driver_ids[] = {
 999         {
1000                 .name           = "s3c2410-i2c",
1001                 .driver_data    = TYPE_S3C2410,
1002         }, {
1003                 .name           = "s3c2440-i2c",
1004                 .driver_data    = TYPE_S3C2440,
1005         }, { },
1006 };
1007 MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
1008
1009 static struct platform_driver s3c24xx_i2c_driver = {
1010         .probe          = s3c24xx_i2c_probe,
1011         .remove         = s3c24xx_i2c_remove,
1012         .id_table       = s3c24xx_driver_ids,
1013         .driver         = {
1014                 .owner  = THIS_MODULE,
1015                 .name   = "s3c-i2c",
1016                 .pm     = S3C24XX_DEV_PM_OPS,
1017         },
1018 };
1019
1020 static int __init i2c_adap_s3c_init(void)
1021 {
1022         return platform_driver_register(&s3c24xx_i2c_driver);
1023 }
1024 subsys_initcall(i2c_adap_s3c_init);
1025
1026 static void __exit i2c_adap_s3c_exit(void)
1027 {
1028         platform_driver_unregister(&s3c24xx_i2c_driver);
1029 }
1030 module_exit(i2c_adap_s3c_exit);
1031
1032 MODULE_DESCRIPTION("S3C24XX I2C Bus driver");
1033 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
1034 MODULE_LICENSE("GPL");