release/src-rt-6.x.4708/linux/linux-2.6.36/drivers/char/rio/cirrus.h

   1 /****************************************************************************
   2  *******                                                              *******
   3  *******                CIRRUS.H                                      *******
   4  *******                                                              *******
   5  ****************************************************************************
   6
   7  Author  : Jeremy Rolls
   8  Date    : 3 Aug 1990
   9
  10  *
  11  *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
  12  *
  13  *      This program is free software; you can redistribute it and/or modify
  14  *      it under the terms of the GNU General Public License as published by
  15  *      the Free Software Foundation; either version 2 of the License, or
  16  *      (at your option) any later version.
  17  *
  18  *      This program is distributed in the hope that it will be useful,
  19  *      but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  *      GNU General Public License for more details.
  22  *
  23  *      You should have received a copy of the GNU General Public License
  24  *      along with this program; if not, write to the Free Software
  25  *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26
  27  Version : 0.01
  28
  29
  30                             Mods
  31  ----------------------------------------------------------------------------
  32   Date     By                Description
  33  ----------------------------------------------------------------------------
  34
  35  ***************************************************************************/
  36
  37 #ifndef _cirrus_h
  38 #define _cirrus_h 1
  39
  40 /* Bit fields for particular registers shared with driver */
  41
  42 /* COR1 - driver and RTA */
  43 #define RIOC_COR1_ODD           0x80    /* Odd parity */
  44 #define RIOC_COR1_EVEN          0x00    /* Even parity */
  45 #define RIOC_COR1_NOP           0x00    /* No parity */
  46 #define RIOC_COR1_FORCE         0x20    /* Force parity */
  47 #define RIOC_COR1_NORMAL        0x40    /* With parity */
  48 #define RIOC_COR1_1STOP         0x00    /* 1 stop bit */
  49 #define RIOC_COR1_15STOP        0x04    /* 1.5 stop bits */
  50 #define RIOC_COR1_2STOP         0x08    /* 2 stop bits */
  51 #define RIOC_COR1_5BITS         0x00    /* 5 data bits */
  52 #define RIOC_COR1_6BITS         0x01    /* 6 data bits */
  53 #define RIOC_COR1_7BITS         0x02    /* 7 data bits */
  54 #define RIOC_COR1_8BITS         0x03    /* 8 data bits */
  55
  56 #define RIOC_COR1_HOST          0xef    /* Safe host bits */
  57
  58 /* RTA only */
  59 #define RIOC_COR1_CINPCK        0x00    /* Check parity of received characters */
  60 #define RIOC_COR1_CNINPCK       0x10    /* Don't check parity */
  61
  62 /* COR2 bits for both RTA and driver use */
  63 #define RIOC_COR2_IXANY         0x80    /* IXANY - any character is XON */
  64 #define RIOC_COR2_IXON          0x40    /* IXON - enable tx soft flowcontrol */
  65 #define RIOC_COR2_RTSFLOW       0x02    /* Enable tx hardware flow control */
  66
  67 /* Additional driver bits */
  68 #define RIOC_COR2_HUPCL         0x20    /* Hang up on close */
  69 #define RIOC_COR2_CTSFLOW       0x04    /* Enable rx hardware flow control */
  70 #define RIOC_COR2_IXOFF         0x01    /* Enable rx software flow control */
  71 #define RIOC_COR2_DTRFLOW       0x08    /* Enable tx hardware flow control */
  72
  73 /* RTA use only */
  74 #define RIOC_COR2_ETC           0x20    /* Embedded transmit options */
  75 #define RIOC_COR2_LOCAL         0x10    /* Local loopback mode */
  76 #define RIOC_COR2_REMOTE        0x08    /* Remote loopback mode */
  77 #define RIOC_COR2_HOST          0xc2    /* Safe host bits */
  78
  79 /* COR3 - RTA use only */
  80 #define RIOC_COR3_SCDRNG        0x80    /* Enable special char detect for range */
  81 #define RIOC_COR3_SCD34         0x40    /* Special character detect for SCHR's 3 + 4 */
  82 #define RIOC_COR3_FCT           0x20    /* Flow control transparency */
  83 #define RIOC_COR3_SCD12         0x10    /* Special character detect for SCHR's 1 + 2 */
  84 #define RIOC_COR3_FIFO12        0x0c    /* 12 chars for receive FIFO threshold */
  85 #define RIOC_COR3_FIFO10        0x0a    /* 10 chars for receive FIFO threshold */
  86 #define RIOC_COR3_FIFO8         0x08    /* 8 chars for receive FIFO threshold */
  87 #define RIOC_COR3_FIFO6         0x06    /* 6 chars for receive FIFO threshold */
  88
  89 #define RIOC_COR3_THRESHOLD     RIOC_COR3_FIFO8 /* MUST BE LESS THAN MCOR_THRESHOLD */
  90
  91 #define RIOC_COR3_DEFAULT       (RIOC_COR3_FCT | RIOC_COR3_THRESHOLD)
  92                                 /* Default bits for COR3 */
  93
  94 /* COR4 driver and RTA use */
  95 #define RIOC_COR4_IGNCR         0x80    /* Throw away CR's on input */
  96 #define RIOC_COR4_ICRNL         0x40    /* Map CR -> NL on input */
  97 #define RIOC_COR4_INLCR         0x20    /* Map NL -> CR on input */
  98 #define RIOC_COR4_IGNBRK        0x10    /* Ignore Break */
  99 #define RIOC_COR4_NBRKINT       0x08    /* No interrupt on break (-BRKINT) */
 100 #define RIOC_COR4_RAISEMOD      0x01    /* Raise modem output lines on non-zero baud */
 101
 102
 103 /* COR4 driver only */
 104 #define RIOC_COR4_IGNPAR        0x04    /* IGNPAR (ignore characters with errors) */
 105 #define RIOC_COR4_PARMRK        0x02    /* PARMRK */
 106
 107 #define RIOC_COR4_HOST          0xf8    /* Safe host bits */
 108
 109 /* COR4 RTA only */
 110 #define RIOC_COR4_CIGNPAR       0x02    /* Thrown away bad characters */
 111 #define RIOC_COR4_CPARMRK       0x04    /* PARMRK characters */
 112 #define RIOC_COR4_CNPARMRK      0x03    /* Don't PARMRK */
 113
 114 /* COR5 driver and RTA use */
 115 #define RIOC_COR5_ISTRIP        0x80    /* Strip input chars to 7 bits */
 116 #define RIOC_COR5_LNE           0x40    /* Enable LNEXT processing */
 117 #define RIOC_COR5_CMOE          0x20    /* Match good and errored characters */
 118 #define RIOC_COR5_ONLCR         0x02    /* NL -> CR NL on output */
 119 #define RIOC_COR5_OCRNL         0x01    /* CR -> NL on output */
 120
 121 /*
 122 ** Spare bits - these are not used in the CIRRUS registers, so we use
 123 ** them to set various other features.
 124 */
 125 /*
 126 ** tstop and tbusy indication
 127 */
 128 #define RIOC_COR5_TSTATE_ON     0x08    /* Turn on monitoring of tbusy and tstop */
 129 #define RIOC_COR5_TSTATE_OFF    0x04    /* Turn off monitoring of tbusy and tstop */
 130 /*
 131 ** TAB3
 132 */
 133 #define RIOC_COR5_TAB3          0x10    /* TAB3 mode */
 134
 135 #define RIOC_COR5_HOST          0xc3    /* Safe host bits */
 136
 137 /* CCSR */
 138 #define RIOC_CCSR_TXFLOFF       0x04    /* Tx is xoffed */
 139
 140 /* MSVR1 */
 141 /* NB. DTR / CD swapped from Cirrus spec as the pins are also reversed on the
 142    RTA. This is because otherwise DCD would get lost on the 1 parallel / 3
 143    serial option.
 144 */
 145 #define RIOC_MSVR1_CD           0x80    /* CD (DSR on Cirrus) */
 146 #define RIOC_MSVR1_RTS          0x40    /* RTS (CTS on Cirrus) */
 147 #define RIOC_MSVR1_RI           0x20    /* RI */
 148 #define RIOC_MSVR1_DTR          0x10    /* DTR (CD on Cirrus) */
 149 #define RIOC_MSVR1_CTS          0x01    /* CTS output pin (RTS on Cirrus) */
 150 /* Next two used to indicate state of tbusy and tstop to driver */
 151 #define RIOC_MSVR1_TSTOP        0x08    /* Set if port flow controlled */
 152 #define RIOC_MSVR1_TEMPTY       0x04    /* Set if port tx buffer empty */
 153
 154 #define RIOC_MSVR1_HOST         0xf3    /* The bits the host wants */
 155
 156 /* Defines for the subscripts of a CONFIG packet */
 157 #define RIOC_CONFIG_COR1        1       /* Option register 1 */
 158 #define RIOC_CONFIG_COR2        2       /* Option register 2 */
 159 #define RIOC_CONFIG_COR4        3       /* Option register 4 */
 160 #define RIOC_CONFIG_COR5        4       /* Option register 5 */
 161 #define RIOC_CONFIG_TXXON       5       /* Tx XON character */
 162 #define RIOC_CONFIG_TXXOFF      6       /* Tx XOFF character */
 163 #define RIOC_CONFIG_RXXON       7       /* Rx XON character */
 164 #define RIOC_CONFIG_RXXOFF      8       /* Rx XOFF character */
 165 #define RIOC_CONFIG_LNEXT       9       /* LNEXT character */
 166 #define RIOC_CONFIG_TXBAUD      10      /* Tx baud rate */
 167 #define RIOC_CONFIG_RXBAUD      11      /* Rx baud rate */
 168
 169 #define RIOC_PRE_EMPTIVE        0x80    /* Pre-emptive bit in command field */
 170
 171 /* Packet types going from Host to remote - with the exception of OPEN, MOPEN,
 172    CONFIG, SBREAK and MEMDUMP the remaining bytes of the data array will not
 173    be used
 174 */
 175 #define RIOC_OPEN               0x00    /* Open a port */
 176 #define RIOC_CONFIG             0x01    /* Configure a port */
 177 #define RIOC_MOPEN              0x02    /* Modem open (block for DCD) */
 178 #define RIOC_CLOSE              0x03    /* Close a port */
 179 #define RIOC_WFLUSH             (0x04 | RIOC_PRE_EMPTIVE)       /* Write flush */
 180 #define RIOC_RFLUSH             (0x05 | RIOC_PRE_EMPTIVE)       /* Read flush */
 181 #define RIOC_RESUME             (0x06 | RIOC_PRE_EMPTIVE)       /* Resume if xoffed */
 182 #define RIOC_SBREAK             0x07    /* Start break */
 183 #define RIOC_EBREAK             0x08    /* End break */
 184 #define RIOC_SUSPEND            (0x09 | RIOC_PRE_EMPTIVE)       /* Susp op (behave as tho xoffed) */
 185 #define RIOC_FCLOSE             (0x0a | RIOC_PRE_EMPTIVE)       /* Force close */
 186 #define RIOC_XPRINT             0x0b    /* Xprint packet */
 187 #define RIOC_MBIS               (0x0c | RIOC_PRE_EMPTIVE)       /* Set modem lines */
 188 #define RIOC_MBIC               (0x0d | RIOC_PRE_EMPTIVE)       /* Clear modem lines */
 189 #define RIOC_MSET               (0x0e | RIOC_PRE_EMPTIVE)       /* Set modem lines */
 190 #define RIOC_PCLOSE             0x0f    /* Pseudo close - Leaves rx/tx enabled */
 191 #define RIOC_MGET               (0x10 | RIOC_PRE_EMPTIVE)       /* Force update of modem status */
 192 #define RIOC_MEMDUMP            (0x11 | RIOC_PRE_EMPTIVE)       /* Send back mem from addr supplied */
 193 #define RIOC_READ_REGISTER      (0x12 | RIOC_PRE_EMPTIVE)       /* Read CD1400 register (debug) */
 194
 195 /* "Command" packets going from remote to host COMPLETE and MODEM_STATUS
 196    use data[4] / data[3] to indicate current state and modem status respectively
 197 */
 198
 199 #define RIOC_COMPLETE           (0x20 | RIOC_PRE_EMPTIVE)
 200                                 /* Command complete */
 201 #define RIOC_BREAK_RECEIVED     (0x21 | RIOC_PRE_EMPTIVE)
 202                                 /* Break received */
 203 #define RIOC_MODEM_STATUS       (0x22 | RIOC_PRE_EMPTIVE)
 204                                 /* Change in modem status */
 205
 206 /* "Command" packet that could go either way - handshake wake-up */
 207 #define RIOC_HANDSHAKE          (0x23 | RIOC_PRE_EMPTIVE)
 208                                 /* Wake-up to HOST / RTA */
 209
 210 #endif