GUI: Fix Tomato RAF theme for all builds. Compilation typo.
[tomato.git] / release / src-rt-6.x.4708 / linux / linux-2.6.36 / drivers / ata / ahci.h
blobd1a0f5bfdfeb8766210e6d0ab7c08d6b2c06e8fa
1 /*
2 * ahci.h - Common AHCI SATA definitions and declarations
4 * Maintained by: Jeff Garzik <jgarzik@pobox.com>
5 * Please ALWAYS copy linux-ide@vger.kernel.org
6 * on emails.
8 * Copyright 2004-2005 Red Hat, Inc.
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2, or (at your option)
14 * any later version.
16 * This program is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public License
22 * along with this program; see the file COPYING. If not, write to
23 * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
26 * libata documentation is available via 'make {ps|pdf}docs',
27 * as Documentation/DocBook/libata.*
29 * AHCI hardware documentation:
30 * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
31 * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
35 #ifndef _AHCI_H
36 #define _AHCI_H
38 #include <linux/libata.h>
40 /* Enclosure Management Control */
41 #define EM_CTRL_MSG_TYPE 0x000f0000
43 /* Enclosure Management LED Message Type */
44 #define EM_MSG_LED_HBA_PORT 0x0000000f
45 #define EM_MSG_LED_PMP_SLOT 0x0000ff00
46 #define EM_MSG_LED_VALUE 0xffff0000
47 #define EM_MSG_LED_VALUE_ACTIVITY 0x00070000
48 #define EM_MSG_LED_VALUE_OFF 0xfff80000
49 #define EM_MSG_LED_VALUE_ON 0x00010000
51 enum {
52 AHCI_MAX_PORTS = 32,
53 AHCI_MAX_SG = 168, /* hardware max is 64K */
54 AHCI_DMA_BOUNDARY = 0xffffffff,
55 AHCI_MAX_CMDS = 32,
56 AHCI_CMD_SZ = 32,
57 AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
58 AHCI_RX_FIS_SZ = 256,
59 AHCI_CMD_TBL_CDB = 0x40,
60 AHCI_CMD_TBL_HDR_SZ = 0x80,
61 AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
62 AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
63 AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
64 AHCI_RX_FIS_SZ,
65 AHCI_PORT_PRIV_FBS_DMA_SZ = AHCI_CMD_SLOT_SZ +
66 AHCI_CMD_TBL_AR_SZ +
67 (AHCI_RX_FIS_SZ * 16),
68 AHCI_IRQ_ON_SG = (1 << 31),
69 AHCI_CMD_ATAPI = (1 << 5),
70 AHCI_CMD_WRITE = (1 << 6),
71 AHCI_CMD_PREFETCH = (1 << 7),
72 AHCI_CMD_RESET = (1 << 8),
73 AHCI_CMD_CLR_BUSY = (1 << 10),
75 RX_FIS_PIO_SETUP = 0x20, /* offset of PIO Setup FIS data */
76 RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
77 RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
78 RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
80 /* global controller registers */
81 HOST_CAP = 0x00, /* host capabilities */
82 HOST_CTL = 0x04, /* global host control */
83 HOST_IRQ_STAT = 0x08, /* interrupt status */
84 HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
85 HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
86 HOST_EM_LOC = 0x1c, /* Enclosure Management location */
87 HOST_EM_CTL = 0x20, /* Enclosure Management Control */
88 HOST_CAP2 = 0x24, /* host capabilities, extended */
90 /* HOST_CTL bits */
91 HOST_RESET = (1 << 0), /* reset controller; self-clear */
92 HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
93 HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
95 /* HOST_CAP bits */
96 HOST_CAP_SXS = (1 << 5), /* Supports External SATA */
97 HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */
98 HOST_CAP_CCC = (1 << 7), /* Command Completion Coalescing */
99 HOST_CAP_PART = (1 << 13), /* Partial state capable */
100 HOST_CAP_SSC = (1 << 14), /* Slumber state capable */
101 HOST_CAP_PIO_MULTI = (1 << 15), /* PIO multiple DRQ support */
102 HOST_CAP_FBS = (1 << 16), /* FIS-based switching support */
103 HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
104 HOST_CAP_ONLY = (1 << 18), /* Supports AHCI mode only */
105 HOST_CAP_CLO = (1 << 24), /* Command List Override support */
106 HOST_CAP_LED = (1 << 25), /* Supports activity LED */
107 HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
108 HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
109 HOST_CAP_MPS = (1 << 28), /* Mechanical presence switch */
110 HOST_CAP_SNTF = (1 << 29), /* SNotification register */
111 HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
112 HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
114 /* HOST_CAP2 bits */
115 HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */
116 HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */
117 HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */
119 /* registers for each SATA port */
120 PORT_LST_ADDR = 0x00, /* command list DMA addr */
121 PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
122 PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
123 PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
124 PORT_IRQ_STAT = 0x10, /* interrupt status */
125 PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
126 PORT_CMD = 0x18, /* port command */
127 PORT_TFDATA = 0x20, /* taskfile data */
128 PORT_SIG = 0x24, /* device TF signature */
129 PORT_CMD_ISSUE = 0x38, /* command issue */
130 PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
131 PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
132 PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
133 PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
134 PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
135 PORT_FBS = 0x40, /* FIS-based Switching */
137 /* PORT_IRQ_{STAT,MASK} bits */
138 PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
139 PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
140 PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
141 PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
142 PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
143 PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
144 PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
145 PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
147 PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
148 PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
149 PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
150 PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
151 PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
152 PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
153 PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
154 PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
155 PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
157 PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
158 PORT_IRQ_IF_ERR |
159 PORT_IRQ_CONNECT |
160 PORT_IRQ_PHYRDY |
161 PORT_IRQ_UNK_FIS |
162 PORT_IRQ_BAD_PMP,
163 PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
164 PORT_IRQ_TF_ERR |
165 PORT_IRQ_HBUS_DATA_ERR,
166 DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
167 PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
168 PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
170 /* PORT_CMD bits */
171 PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
172 PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
173 PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
174 PORT_CMD_FBSCP = (1 << 22), /* FBS Capable Port */
175 PORT_CMD_PMP = (1 << 17), /* PMP attached */
176 PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
177 PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
178 PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
179 PORT_CMD_CLO = (1 << 3), /* Command list override */
180 PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
181 PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
182 PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
184 PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */
185 PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
186 PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
187 PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
189 PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */
190 PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */
191 PORT_FBS_DEV_OFFSET = 8, /* FBS device to issue offset */
192 PORT_FBS_DEV_MASK = (0xf << PORT_FBS_DEV_OFFSET), /* FBS.DEV */
193 PORT_FBS_SDE = (1 << 2), /* FBS single device error */
194 PORT_FBS_DEC = (1 << 1), /* FBS device error clear */
195 PORT_FBS_EN = (1 << 0), /* Enable FBS */
197 /* hpriv->flags bits */
198 AHCI_HFLAG_NO_NCQ = (1 << 0),
199 AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */
200 AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */
201 AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */
202 AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
203 AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
204 AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
205 AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
206 AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
207 AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
208 AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
209 AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
210 link offline */
211 AHCI_HFLAG_NO_SNTF = (1 << 12), /* no sntf */
212 AHCI_HFLAG_NO_FPDMA_AA = (1 << 13), /* no FPDMA AA */
213 AHCI_HFLAG_YES_FBS = (1 << 14), /* force FBS cap on */
215 /* ap->flags bits */
217 AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
218 ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
219 ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
220 ATA_FLAG_IPM,
222 ICH_MAP = 0x90, /* ICH MAP register */
224 /* em constants */
225 EM_MAX_SLOTS = 8,
226 EM_MAX_RETRY = 5,
228 /* em_ctl bits */
229 EM_CTL_RST = (1 << 9), /* Reset */
230 EM_CTL_TM = (1 << 8), /* Transmit Message */
231 EM_CTL_MR = (1 << 0), /* Message Recieved */
232 EM_CTL_ALHD = (1 << 26), /* Activity LED */
233 EM_CTL_XMT = (1 << 25), /* Transmit Only */
234 EM_CTL_SMB = (1 << 24), /* Single Message Buffer */
236 /* em message type */
237 EM_MSG_TYPE_LED = (1 << 0), /* LED */
238 EM_MSG_TYPE_SAFTE = (1 << 1), /* SAF-TE */
239 EM_MSG_TYPE_SES2 = (1 << 2), /* SES-2 */
240 EM_MSG_TYPE_SGPIO = (1 << 3), /* SGPIO */
243 struct ahci_cmd_hdr {
244 __le32 opts;
245 __le32 status;
246 __le32 tbl_addr;
247 __le32 tbl_addr_hi;
248 __le32 reserved[4];
251 struct ahci_sg {
252 __le32 addr;
253 __le32 addr_hi;
254 __le32 reserved;
255 __le32 flags_size;
258 struct ahci_em_priv {
259 enum sw_activity blink_policy;
260 struct timer_list timer;
261 unsigned long saved_activity;
262 unsigned long activity;
263 unsigned long led_state;
266 struct ahci_port_priv {
267 struct ata_link *active_link;
268 struct ahci_cmd_hdr *cmd_slot;
269 dma_addr_t cmd_slot_dma;
270 void *cmd_tbl;
271 dma_addr_t cmd_tbl_dma;
272 void *rx_fis;
273 dma_addr_t rx_fis_dma;
274 /* for NCQ spurious interrupt analysis */
275 unsigned int ncq_saw_d2h:1;
276 unsigned int ncq_saw_dmas:1;
277 unsigned int ncq_saw_sdb:1;
278 u32 intr_mask; /* interrupts to enable */
279 bool fbs_supported; /* set iff FBS is supported */
280 bool fbs_enabled; /* set iff FBS is enabled */
281 int fbs_last_dev; /* save FBS.DEV of last FIS */
282 /* enclosure management info per PM slot */
283 struct ahci_em_priv em_priv[EM_MAX_SLOTS];
286 struct ahci_host_priv {
287 void __iomem * mmio; /* bus-independant mem map */
288 unsigned int flags; /* AHCI_HFLAG_* */
289 u32 cap; /* cap to use */
290 u32 cap2; /* cap2 to use */
291 u32 port_map; /* port map to use */
292 u32 saved_cap; /* saved initial cap */
293 u32 saved_cap2; /* saved initial cap2 */
294 u32 saved_port_map; /* saved initial port_map */
295 u32 em_loc; /* enclosure management location */
296 u32 em_buf_sz; /* EM buffer size in byte */
297 u32 em_msg_type; /* EM message type */
300 extern int ahci_ignore_sss;
302 extern struct device_attribute *ahci_shost_attrs[];
303 extern struct device_attribute *ahci_sdev_attrs[];
305 #define AHCI_SHT(drv_name) \
306 ATA_NCQ_SHT(drv_name), \
307 .can_queue = AHCI_MAX_CMDS - 1, \
308 .sg_tablesize = AHCI_MAX_SG, \
309 .dma_boundary = AHCI_DMA_BOUNDARY, \
310 .shost_attrs = ahci_shost_attrs, \
311 .sdev_attrs = ahci_sdev_attrs
313 extern struct ata_port_operations ahci_ops;
315 void ahci_save_initial_config(struct device *dev,
316 struct ahci_host_priv *hpriv,
317 unsigned int force_port_map,
318 unsigned int mask_port_map);
319 void ahci_init_controller(struct ata_host *host);
320 int ahci_reset_controller(struct ata_host *host);
322 int ahci_do_softreset(struct ata_link *link, unsigned int *class,
323 int pmp, unsigned long deadline,
324 int (*check_ready)(struct ata_link *link));
326 int ahci_stop_engine(struct ata_port *ap);
327 void ahci_start_engine(struct ata_port *ap);
328 int ahci_check_ready(struct ata_link *link);
329 int ahci_kick_engine(struct ata_port *ap);
330 void ahci_set_em_messages(struct ahci_host_priv *hpriv,
331 struct ata_port_info *pi);
332 int ahci_reset_em(struct ata_host *host);
333 irqreturn_t ahci_interrupt(int irq, void *dev_instance);
334 void ahci_print_info(struct ata_host *host, const char *scc_s);
336 static inline void __iomem *__ahci_port_base(struct ata_host *host,
337 unsigned int port_no)
339 struct ahci_host_priv *hpriv = host->private_data;
340 void __iomem *mmio = hpriv->mmio;
342 return mmio + 0x100 + (port_no * 0x80);
345 static inline void __iomem *ahci_port_base(struct ata_port *ap)
347 return __ahci_port_base(ap->host, ap->port_no);
350 static inline int ahci_nr_ports(u32 cap)
352 return (cap & 0x1f) + 1;
355 #endif /* _AHCI_H */