release/src-rt-6.x.4708/linux/linux-2.6.36/arch/tile/kernel/smpboot.c

   1 /*
   2  * Copyright 2010 Tilera Corporation. All Rights Reserved.
   3  *
   4  *   This program is free software; you can redistribute it and/or
   5  *   modify it under the terms of the GNU General Public License
   6  *   as published by the Free Software Foundation, version 2.
   7  *
   8  *   This program is distributed in the hope that it will be useful, but
   9  *   WITHOUT ANY WARRANTY; without even the implied warranty of
  10  *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
  11  *   NON INFRINGEMENT.  See the GNU General Public License for
  12  *   more details.
  13  */
  14
  15 #include <linux/module.h>
  16 #include <linux/init.h>
  17 #include <linux/kernel.h>
  18 #include <linux/mm.h>
  19 #include <linux/sched.h>
  20 #include <linux/kernel_stat.h>
  21 #include <linux/smp_lock.h>
  22 #include <linux/bootmem.h>
  23 #include <linux/notifier.h>
  24 #include <linux/cpu.h>
  25 #include <linux/percpu.h>
  26 #include <linux/delay.h>
  27 #include <linux/err.h>
  28 #include <linux/irq.h>
  29 #include <asm/mmu_context.h>
  30 #include <asm/tlbflush.h>
  31 #include <asm/sections.h>
  32
  33 /* State of each CPU. */
  34 static DEFINE_PER_CPU(int, cpu_state) = { 0 };
  35
  36 /* The messaging code jumps to this pointer during boot-up */
  37 unsigned long start_cpu_function_addr;
  38
  39 /* Called very early during startup to mark boot cpu as online */
  40 void __init smp_prepare_boot_cpu(void)
  41 {
  42         int cpu = smp_processor_id();
  43         set_cpu_online(cpu, 1);
  44         set_cpu_present(cpu, 1);
  45         __get_cpu_var(cpu_state) = CPU_ONLINE;
  46
  47         init_messaging();
  48 }
  49
  50 static void start_secondary(void);
  51
  52 /*
  53  * Called at the top of init() to launch all the other CPUs.
  54  * They run free to complete their initialization and then wait
  55  * until they get an IPI from the boot cpu to come online.
  56  */
  57 void __init smp_prepare_cpus(unsigned int max_cpus)
  58 {
  59         long rc;
  60         int cpu, cpu_count;
  61         int boot_cpu = smp_processor_id();
  62
  63         current_thread_info()->cpu = boot_cpu;
  64
  65         /*
  66          * Pin this task to the boot CPU while we bring up the others,
  67          * just to make sure we don't uselessly migrate as they come up.
  68          */
  69         rc = sched_setaffinity(current->pid, cpumask_of(boot_cpu));
  70         if (rc != 0)
  71                 pr_err("Couldn't set init affinity to boot cpu (%ld)\n", rc);
  72
  73         /* Print information about disabled and dataplane cpus. */
  74         print_disabled_cpus();
  75
  76         /*
  77          * Tell the messaging subsystem how to respond to the
  78          * startup message.  We use a level of indirection to avoid
  79          * confusing the linker with the fact that the messaging
  80          * subsystem is calling __init code.
  81          */
  82         start_cpu_function_addr = (unsigned long) &online_secondary;
  83
  84         /* Set up thread context for all new processors. */
  85         cpu_count = 1;
  86         for (cpu = 0; cpu < NR_CPUS; ++cpu)     {
  87                 struct task_struct *idle;
  88
  89                 if (cpu == boot_cpu)
  90                         continue;
  91
  92                 if (!cpu_possible(cpu)) {
  93                         /*
  94                          * Make this processor do nothing on boot.
  95                          * Note that we don't give the boot_pc function
  96                          * a stack, so it has to be assembly code.
  97                          */
  98                         per_cpu(boot_sp, cpu) = 0;
  99                         per_cpu(boot_pc, cpu) = (unsigned long) smp_nap;
 100                         continue;
 101                 }
 102
 103                 /* Create a new idle thread to run start_secondary() */
 104                 idle = fork_idle(cpu);
 105                 if (IS_ERR(idle))
 106                         panic("failed fork for CPU %d", cpu);
 107                 idle->thread.pc = (unsigned long) start_secondary;
 108
 109                 /* Make this thread the boot thread for this processor */
 110                 per_cpu(boot_sp, cpu) = task_ksp0(idle);
 111                 per_cpu(boot_pc, cpu) = idle->thread.pc;
 112
 113                 ++cpu_count;
 114         }
 115         BUG_ON(cpu_count > (max_cpus ? max_cpus : 1));
 116
 117         /* Fire up the other tiles, if any */
 118         init_cpu_present(cpu_possible_mask);
 119         if (cpumask_weight(cpu_present_mask) > 1) {
 120                 mb();  /* make sure all data is visible to new processors */
 121                 hv_start_all_tiles();
 122         }
 123 }
 124
 125 static __initdata struct cpumask init_affinity;
 126
 127 static __init int reset_init_affinity(void)
 128 {
 129         long rc = sched_setaffinity(current->pid, &init_affinity);
 130         if (rc != 0)
 131                 pr_warning("couldn't reset init affinity (%ld)\n",
 132                        rc);
 133         return 0;
 134 }
 135 late_initcall(reset_init_affinity);
 136
 137 static struct cpumask cpu_started __cpuinitdata;
 138
 139 /*
 140  * Activate a secondary processor.  Very minimal; don't add anything
 141  * to this path without knowing what you're doing, since SMP booting
 142  * is pretty fragile.
 143  */
 144 static void __cpuinit start_secondary(void)
 145 {
 146         int cpuid = smp_processor_id();
 147
 148         /* Set our thread pointer appropriately. */
 149         set_my_cpu_offset(__per_cpu_offset[cpuid]);
 150
 151         preempt_disable();
 152
 153         /*
 154          * In large machines even this will slow us down, since we
 155          * will be contending for for the printk spinlock.
 156          */
 157         /* printk(KERN_DEBUG "Initializing CPU#%d\n", cpuid); */
 158
 159         /* Initialize the current asid for our first page table. */
 160         __get_cpu_var(current_asid) = min_asid;
 161
 162         /* Set up this thread as another owner of the init_mm */
 163         atomic_inc(&init_mm.mm_count);
 164         current->active_mm = &init_mm;
 165         if (current->mm)
 166                 BUG();
 167         enter_lazy_tlb(&init_mm, current);
 168
 169         /* Allow hypervisor messages to be received */
 170         init_messaging();
 171         local_irq_enable();
 172
 173         /* Indicate that we're ready to come up. */
 174         /* Must not do this before we're ready to receive messages */
 175         if (cpumask_test_and_set_cpu(cpuid, &cpu_started)) {
 176                 pr_warning("CPU#%d already started!\n", cpuid);
 177                 for (;;)
 178                         local_irq_enable();
 179         }
 180
 181         smp_nap();
 182 }
 183
 184 /*
 185  * Bring a secondary processor online.
 186  */
 187 void __cpuinit online_secondary(void)
 188 {
 189         /*
 190          * low-memory mappings have been cleared, flush them from
 191          * the local TLBs too.
 192          */
 193         local_flush_tlb();
 194
 195         BUG_ON(in_interrupt());
 196
 197         /* This must be done before setting cpu_online_mask */
 198         wmb();
 199
 200         /*
 201          * We need to hold call_lock, so there is no inconsistency
 202          * between the time smp_call_function() determines number of
 203          * IPI recipients, and the time when the determination is made
 204          * for which cpus receive the IPI. Holding this
 205          * lock helps us to not include this cpu in a currently in progress
 206          * smp_call_function().
 207          */
 208         ipi_call_lock();
 209         set_cpu_online(smp_processor_id(), 1);
 210         ipi_call_unlock();
 211         __get_cpu_var(cpu_state) = CPU_ONLINE;
 212
 213         /* Set up tile-specific state for this cpu. */
 214         setup_cpu(0);
 215
 216         /* Set up tile-timer clock-event device on this cpu */
 217         setup_tile_timer();
 218
 219         preempt_enable();
 220
 221         cpu_idle();
 222 }
 223
 224 int __cpuinit __cpu_up(unsigned int cpu)
 225 {
 226         /* Wait 5s total for all CPUs for them to come online */
 227         static int timeout;
 228         for (; !cpumask_test_cpu(cpu, &cpu_started); timeout++) {
 229                 if (timeout >= 50000) {
 230                         pr_info("skipping unresponsive cpu%d\n", cpu);
 231                         local_irq_enable();
 232                         return -EIO;
 233                 }
 234                 udelay(100);
 235         }
 236
 237         local_irq_enable();
 238         per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
 239
 240         /* Unleash the CPU! */
 241         send_IPI_single(cpu, MSG_TAG_START_CPU);
 242         while (!cpumask_test_cpu(cpu, cpu_online_mask))
 243                 cpu_relax();
 244         return 0;
 245 }
 246
 247 static void panic_start_cpu(void)
 248 {
 249         panic("Received a MSG_START_CPU IPI after boot finished.");
 250 }
 251
 252 void __init smp_cpus_done(unsigned int max_cpus)
 253 {
 254         int cpu, next, rc;
 255
 256         /* Reset the response to a (now illegal) MSG_START_CPU IPI. */
 257         start_cpu_function_addr = (unsigned long) &panic_start_cpu;
 258
 259         cpumask_copy(&init_affinity, cpu_online_mask);
 260
 261         /*
 262          * Pin ourselves to a single cpu in the initial affinity set
 263          * so that kernel mappings for the rootfs are not in the dataplane,
 264          * if set, and to avoid unnecessary migrating during bringup.
 265          * Use the last cpu just in case the whole chip has been
 266          * isolated from the scheduler, to keep init away from likely
 267          * more useful user code.  This also ensures that work scheduled
 268          * via schedule_delayed_work() in the init routines will land
 269          * on this cpu.
 270          */
 271         for (cpu = cpumask_first(&init_affinity);
 272              (next = cpumask_next(cpu, &init_affinity)) < nr_cpu_ids;
 273              cpu = next)
 274                 ;
 275         rc = sched_setaffinity(current->pid, cpumask_of(cpu));
 276         if (rc != 0)
 277                 pr_err("Couldn't set init affinity to cpu %d (%d)\n", cpu, rc);
 278 }