release/src-rt-6.x.4708/linux/linux-2.6.36/arch/sh/drivers/pci/pci-sh7751.c

   1 /*
   2  * Low-Level PCI Support for the SH7751
   3  *
   4  *  Copyright (C) 2003 - 2009  Paul Mundt
   5  *  Copyright (C) 2001  Dustin McIntire
   6  *
   7  *  With cleanup by Paul van Gool <pvangool@mimotech.com>, 2003.
   8  *
   9  * This file is subject to the terms and conditions of the GNU General Public
  10  * License.  See the file "COPYING" in the main directory of this archive
  11  * for more details.
  12  */
  13 #include <linux/init.h>
  14 #include <linux/pci.h>
  15 #include <linux/types.h>
  16 #include <linux/errno.h>
  17 #include <linux/io.h>
  18 #include "pci-sh4.h"
  19 #include <asm/addrspace.h>
  20 #include <asm/sizes.h>
  21
  22 static int __init __area_sdram_check(struct pci_channel *chan,
  23                                      unsigned int area)
  24 {
  25         unsigned long word;
  26
  27         word = __raw_readl(SH7751_BCR1);
  28         /* check BCR for SDRAM in area */
  29         if (((word >> area) & 1) == 0) {
  30                 printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n",
  31                        area, word);
  32                 return 0;
  33         }
  34         pci_write_reg(chan, word, SH4_PCIBCR1);
  35
  36         word = __raw_readw(SH7751_BCR2);
  37         /* check BCR2 for 32bit SDRAM interface*/
  38         if (((word >> (area << 1)) & 0x3) != 0x3) {
  39                 printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n",
  40                        area, word);
  41                 return 0;
  42         }
  43         pci_write_reg(chan, word, SH4_PCIBCR2);
  44
  45         return 1;
  46 }
  47
  48 static struct resource sh7751_pci_resources[] = {
  49         {
  50                 .name   = "SH7751_IO",
  51                 .start  = 0x1000,
  52                 .end    = SZ_4M - 1,
  53                 .flags  = IORESOURCE_IO
  54         }, {
  55                 .name   = "SH7751_mem",
  56                 .start  = SH7751_PCI_MEMORY_BASE,
  57                 .end    = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1,
  58                 .flags  = IORESOURCE_MEM
  59         },
  60 };
  61
  62 static struct pci_channel sh7751_pci_controller = {
  63         .pci_ops        = &sh4_pci_ops,
  64         .resources      = sh7751_pci_resources,
  65         .nr_resources   = ARRAY_SIZE(sh7751_pci_resources),
  66         .mem_offset     = 0x00000000,
  67         .io_offset      = 0x00000000,
  68         .io_map_base    = SH7751_PCI_IO_BASE,
  69 };
  70
  71 static struct sh4_pci_address_map sh7751_pci_map = {
  72         .window0        = {
  73                 .base   = SH7751_CS3_BASE_ADDR,
  74                 .size   = 0x04000000,
  75         },
  76 };
  77
  78 static int __init sh7751_pci_init(void)
  79 {
  80         struct pci_channel *chan = &sh7751_pci_controller;
  81         unsigned int id;
  82         u32 word, reg;
  83
  84         printk(KERN_NOTICE "PCI: Starting intialization.\n");
  85
  86         chan->reg_base = 0xfe200000;
  87
  88         /* check for SH7751/SH7751R hardware */
  89         id = pci_read_reg(chan, SH7751_PCICONF0);
  90         if (id != ((SH7751_DEVICE_ID << 16) | SH7751_VENDOR_ID) &&
  91             id != ((SH7751R_DEVICE_ID << 16) | SH7751_VENDOR_ID)) {
  92                 pr_debug("PCI: This is not an SH7751(R) (%x)\n", id);
  93                 return -ENODEV;
  94         }
  95
  96         /* Set the BCR's to enable PCI access */
  97         reg = __raw_readl(SH7751_BCR1);
  98         reg |= 0x80000;
  99         __raw_writel(reg, SH7751_BCR1);
 100
 101         /* Turn the clocks back on (not done in reset)*/
 102         pci_write_reg(chan, 0, SH4_PCICLKR);
 103         /* Clear Powerdown IRQ's (not done in reset) */
 104         word = SH4_PCIPINT_D3 | SH4_PCIPINT_D0;
 105         pci_write_reg(chan, word, SH4_PCIPINT);
 106
 107         /* set the command/status bits to:
 108          * Wait Cycle Control + Parity Enable + Bus Master +
 109          * Mem space enable
 110          */
 111         word = SH7751_PCICONF1_WCC | SH7751_PCICONF1_PER |
 112                SH7751_PCICONF1_BUM | SH7751_PCICONF1_MES;
 113         pci_write_reg(chan, word, SH7751_PCICONF1);
 114
 115         /* define this host as the host bridge */
 116         word = PCI_BASE_CLASS_BRIDGE << 24;
 117         pci_write_reg(chan, word, SH7751_PCICONF2);
 118
 119         /* Set IO and Mem windows to local address
 120          * Make PCI and local address the same for easy 1 to 1 mapping
 121          */
 122         word = sh7751_pci_map.window0.size - 1;
 123         pci_write_reg(chan, word, SH4_PCILSR0);
 124         /* Set the values on window 0 PCI config registers */
 125         word = P2SEGADDR(sh7751_pci_map.window0.base);
 126         pci_write_reg(chan, word, SH4_PCILAR0);
 127         pci_write_reg(chan, word, SH7751_PCICONF5);
 128
 129         /* Set the local 16MB PCI memory space window to
 130          * the lowest PCI mapped address
 131          */
 132         word = chan->resources[1].start & SH4_PCIMBR_MASK;
 133         pr_debug("PCI: Setting upper bits of Memory window to 0x%x\n", word);
 134         pci_write_reg(chan, word , SH4_PCIMBR);
 135
 136         /* Make sure the MSB's of IO window are set to access PCI space
 137          * correctly */
 138         word = chan->resources[0].start & SH4_PCIIOBR_MASK;
 139         pr_debug("PCI: Setting upper bits of IO window to 0x%x\n", word);
 140         pci_write_reg(chan, word, SH4_PCIIOBR);
 141
 142         /* Set PCI WCRx, BCRx's, copy from BSC locations */
 143
 144         /* check BCR for SDRAM in specified area */
 145         switch (sh7751_pci_map.window0.base) {
 146         case SH7751_CS0_BASE_ADDR: word = __area_sdram_check(chan, 0); break;
 147         case SH7751_CS1_BASE_ADDR: word = __area_sdram_check(chan, 1); break;
 148         case SH7751_CS2_BASE_ADDR: word = __area_sdram_check(chan, 2); break;
 149         case SH7751_CS3_BASE_ADDR: word = __area_sdram_check(chan, 3); break;
 150         case SH7751_CS4_BASE_ADDR: word = __area_sdram_check(chan, 4); break;
 151         case SH7751_CS5_BASE_ADDR: word = __area_sdram_check(chan, 5); break;
 152         case SH7751_CS6_BASE_ADDR: word = __area_sdram_check(chan, 6); break;
 153         }
 154
 155         if (!word)
 156                 return -1;
 157
 158         /* configure the wait control registers */
 159         word = __raw_readl(SH7751_WCR1);
 160         pci_write_reg(chan, word, SH4_PCIWCR1);
 161         word = __raw_readl(SH7751_WCR2);
 162         pci_write_reg(chan, word, SH4_PCIWCR2);
 163         word = __raw_readl(SH7751_WCR3);
 164         pci_write_reg(chan, word, SH4_PCIWCR3);
 165         word = __raw_readl(SH7751_MCR);
 166         pci_write_reg(chan, word, SH4_PCIMCR);
 167
 168         /* NOTE: I'm ignoring the PCI error IRQs for now..
 169          * TODO: add support for the internal error interrupts and
 170          * DMA interrupts...
 171          */
 172
 173         pci_fixup_pcic(chan);
 174
 175         /* SH7751 init done, set central function init complete */
 176         /* use round robin mode to stop a device starving/overruning */
 177         word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_ARBM;
 178         pci_write_reg(chan, word, SH4_PCICR);
 179
 180         return register_pci_controller(chan);
 181 }
 182 arch_initcall(sh7751_pci_init);