GUI: Fix Tomato RAF theme for all builds. Compilation typo.
[tomato.git] / release / src-rt-6.x.4708 / linux / linux-2.6.36 / arch / powerpc / platforms / 52xx / mpc52xx_gpt.c
blobfea833e18ad58ab92c78da66e35e2f23dcacd8ff
1 /*
2 * MPC5200 General Purpose Timer device driver
4 * Copyright (c) 2009 Secret Lab Technologies Ltd.
5 * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
12 * This file is a driver for the the General Purpose Timer (gpt) devices
13 * found on the MPC5200 SoC. Each timer has an IO pin which can be used
14 * for GPIO or can be used to raise interrupts. The timer function can
15 * be used independently from the IO pin, or it can be used to control
16 * output signals or measure input signals.
18 * This driver supports the GPIO and IRQ controller functions of the GPT
19 * device. Timer functions are not yet supported.
21 * The timer gpt0 can be used as watchdog (wdt). If the wdt mode is used,
22 * this prevents the use of any gpt0 gpt function (i.e. they will fail with
23 * -EBUSY). Thus, the safety wdt function always has precedence over the gpt
24 * function. If the kernel has been compiled with CONFIG_WATCHDOG_NOWAYOUT,
25 * this means that gpt0 is locked in wdt mode until the next reboot - this
26 * may be a requirement in safety applications.
28 * To use the GPIO function, the following two properties must be added
29 * to the device tree node for the gpt device (typically in the .dts file
30 * for the board):
31 * gpio-controller;
32 * #gpio-cells = < 2 >;
33 * This driver will register the GPIO pin if it finds the gpio-controller
34 * property in the device tree.
36 * To use the IRQ controller function, the following two properties must
37 * be added to the device tree node for the gpt device:
38 * interrupt-controller;
39 * #interrupt-cells = < 1 >;
40 * The IRQ controller binding only uses one cell to specify the interrupt,
41 * and the IRQ flags are encoded in the cell. A cell is not used to encode
42 * the IRQ number because the GPT only has a single IRQ source. For flags,
43 * a value of '1' means rising edge sensitive and '2' means falling edge.
45 * The GPIO and the IRQ controller functions can be used at the same time,
46 * but in this use case the IO line will only work as an input. Trying to
47 * use it as a GPIO output will not work.
49 * When using the GPIO line as an output, it can either be driven as normal
50 * IO, or it can be an Open Collector (OC) output. At the moment it is the
51 * responsibility of either the bootloader or the platform setup code to set
52 * the output mode. This driver does not change the output mode setting.
55 #include <linux/device.h>
56 #include <linux/irq.h>
57 #include <linux/interrupt.h>
58 #include <linux/io.h>
59 #include <linux/list.h>
60 #include <linux/mutex.h>
61 #include <linux/of.h>
62 #include <linux/of_platform.h>
63 #include <linux/of_gpio.h>
64 #include <linux/kernel.h>
65 #include <linux/slab.h>
66 #include <linux/watchdog.h>
67 #include <linux/miscdevice.h>
68 #include <linux/uaccess.h>
69 #include <asm/div64.h>
70 #include <asm/mpc52xx.h>
72 MODULE_DESCRIPTION("Freescale MPC52xx gpt driver");
73 MODULE_AUTHOR("Sascha Hauer, Grant Likely, Albrecht Dreß");
74 MODULE_LICENSE("GPL");
76 /**
77 * struct mpc52xx_gpt - Private data structure for MPC52xx GPT driver
78 * @dev: pointer to device structure
79 * @regs: virtual address of GPT registers
80 * @lock: spinlock to coordinate between different functions.
81 * @gc: gpio_chip instance structure; used when GPIO is enabled
82 * @irqhost: Pointer to irq_host instance; used when IRQ mode is supported
83 * @wdt_mode: only relevant for gpt0: bit 0 (MPC52xx_GPT_CAN_WDT) indicates
84 * if the gpt may be used as wdt, bit 1 (MPC52xx_GPT_IS_WDT) indicates
85 * if the timer is actively used as wdt which blocks gpt functions
87 struct mpc52xx_gpt_priv {
88 struct list_head list; /* List of all GPT devices */
89 struct device *dev;
90 struct mpc52xx_gpt __iomem *regs;
91 spinlock_t lock;
92 struct irq_host *irqhost;
93 u32 ipb_freq;
94 u8 wdt_mode;
96 #if defined(CONFIG_GPIOLIB)
97 struct gpio_chip gc;
98 #endif
101 LIST_HEAD(mpc52xx_gpt_list);
102 DEFINE_MUTEX(mpc52xx_gpt_list_mutex);
104 #define MPC52xx_GPT_MODE_MS_MASK (0x07)
105 #define MPC52xx_GPT_MODE_MS_IC (0x01)
106 #define MPC52xx_GPT_MODE_MS_OC (0x02)
107 #define MPC52xx_GPT_MODE_MS_PWM (0x03)
108 #define MPC52xx_GPT_MODE_MS_GPIO (0x04)
110 #define MPC52xx_GPT_MODE_GPIO_MASK (0x30)
111 #define MPC52xx_GPT_MODE_GPIO_OUT_LOW (0x20)
112 #define MPC52xx_GPT_MODE_GPIO_OUT_HIGH (0x30)
114 #define MPC52xx_GPT_MODE_COUNTER_ENABLE (0x1000)
115 #define MPC52xx_GPT_MODE_CONTINUOUS (0x0400)
116 #define MPC52xx_GPT_MODE_OPEN_DRAIN (0x0200)
117 #define MPC52xx_GPT_MODE_IRQ_EN (0x0100)
118 #define MPC52xx_GPT_MODE_WDT_EN (0x8000)
120 #define MPC52xx_GPT_MODE_ICT_MASK (0x030000)
121 #define MPC52xx_GPT_MODE_ICT_RISING (0x010000)
122 #define MPC52xx_GPT_MODE_ICT_FALLING (0x020000)
123 #define MPC52xx_GPT_MODE_ICT_TOGGLE (0x030000)
125 #define MPC52xx_GPT_MODE_WDT_PING (0xa5)
127 #define MPC52xx_GPT_STATUS_IRQMASK (0x000f)
129 #define MPC52xx_GPT_CAN_WDT (1 << 0)
130 #define MPC52xx_GPT_IS_WDT (1 << 1)
133 /* ---------------------------------------------------------------------
134 * Cascaded interrupt controller hooks
137 static void mpc52xx_gpt_irq_unmask(unsigned int virq)
139 struct mpc52xx_gpt_priv *gpt = get_irq_chip_data(virq);
140 unsigned long flags;
142 spin_lock_irqsave(&gpt->lock, flags);
143 setbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_IRQ_EN);
144 spin_unlock_irqrestore(&gpt->lock, flags);
147 static void mpc52xx_gpt_irq_mask(unsigned int virq)
149 struct mpc52xx_gpt_priv *gpt = get_irq_chip_data(virq);
150 unsigned long flags;
152 spin_lock_irqsave(&gpt->lock, flags);
153 clrbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_IRQ_EN);
154 spin_unlock_irqrestore(&gpt->lock, flags);
157 static void mpc52xx_gpt_irq_ack(unsigned int virq)
159 struct mpc52xx_gpt_priv *gpt = get_irq_chip_data(virq);
161 out_be32(&gpt->regs->status, MPC52xx_GPT_STATUS_IRQMASK);
164 static int mpc52xx_gpt_irq_set_type(unsigned int virq, unsigned int flow_type)
166 struct mpc52xx_gpt_priv *gpt = get_irq_chip_data(virq);
167 unsigned long flags;
168 u32 reg;
170 dev_dbg(gpt->dev, "%s: virq=%i type=%x\n", __func__, virq, flow_type);
172 spin_lock_irqsave(&gpt->lock, flags);
173 reg = in_be32(&gpt->regs->mode) & ~MPC52xx_GPT_MODE_ICT_MASK;
174 if (flow_type & IRQF_TRIGGER_RISING)
175 reg |= MPC52xx_GPT_MODE_ICT_RISING;
176 if (flow_type & IRQF_TRIGGER_FALLING)
177 reg |= MPC52xx_GPT_MODE_ICT_FALLING;
178 out_be32(&gpt->regs->mode, reg);
179 spin_unlock_irqrestore(&gpt->lock, flags);
181 return 0;
184 static struct irq_chip mpc52xx_gpt_irq_chip = {
185 .name = "MPC52xx GPT",
186 .unmask = mpc52xx_gpt_irq_unmask,
187 .mask = mpc52xx_gpt_irq_mask,
188 .ack = mpc52xx_gpt_irq_ack,
189 .set_type = mpc52xx_gpt_irq_set_type,
192 void mpc52xx_gpt_irq_cascade(unsigned int virq, struct irq_desc *desc)
194 struct mpc52xx_gpt_priv *gpt = get_irq_data(virq);
195 int sub_virq;
196 u32 status;
198 status = in_be32(&gpt->regs->status) & MPC52xx_GPT_STATUS_IRQMASK;
199 if (status) {
200 sub_virq = irq_linear_revmap(gpt->irqhost, 0);
201 generic_handle_irq(sub_virq);
205 static int mpc52xx_gpt_irq_map(struct irq_host *h, unsigned int virq,
206 irq_hw_number_t hw)
208 struct mpc52xx_gpt_priv *gpt = h->host_data;
210 dev_dbg(gpt->dev, "%s: h=%p, virq=%i\n", __func__, h, virq);
211 set_irq_chip_data(virq, gpt);
212 set_irq_chip_and_handler(virq, &mpc52xx_gpt_irq_chip, handle_edge_irq);
214 return 0;
217 static int mpc52xx_gpt_irq_xlate(struct irq_host *h, struct device_node *ct,
218 const u32 *intspec, unsigned int intsize,
219 irq_hw_number_t *out_hwirq,
220 unsigned int *out_flags)
222 struct mpc52xx_gpt_priv *gpt = h->host_data;
224 dev_dbg(gpt->dev, "%s: flags=%i\n", __func__, intspec[0]);
226 if ((intsize < 1) || (intspec[0] > 3)) {
227 dev_err(gpt->dev, "bad irq specifier in %s\n", ct->full_name);
228 return -EINVAL;
231 *out_hwirq = 0; /* The GPT only has 1 IRQ line */
232 *out_flags = intspec[0];
234 return 0;
237 static struct irq_host_ops mpc52xx_gpt_irq_ops = {
238 .map = mpc52xx_gpt_irq_map,
239 .xlate = mpc52xx_gpt_irq_xlate,
242 static void
243 mpc52xx_gpt_irq_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node)
245 int cascade_virq;
246 unsigned long flags;
247 u32 mode;
249 cascade_virq = irq_of_parse_and_map(node, 0);
250 if (!cascade_virq)
251 return;
253 gpt->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, 1,
254 &mpc52xx_gpt_irq_ops, -1);
255 if (!gpt->irqhost) {
256 dev_err(gpt->dev, "irq_alloc_host() failed\n");
257 return;
260 gpt->irqhost->host_data = gpt;
261 set_irq_data(cascade_virq, gpt);
262 set_irq_chained_handler(cascade_virq, mpc52xx_gpt_irq_cascade);
264 /* If the GPT is currently disabled, then change it to be in Input
265 * Capture mode. If the mode is non-zero, then the pin could be
266 * already in use for something. */
267 spin_lock_irqsave(&gpt->lock, flags);
268 mode = in_be32(&gpt->regs->mode);
269 if ((mode & MPC52xx_GPT_MODE_MS_MASK) == 0)
270 out_be32(&gpt->regs->mode, mode | MPC52xx_GPT_MODE_MS_IC);
271 spin_unlock_irqrestore(&gpt->lock, flags);
273 dev_dbg(gpt->dev, "%s() complete. virq=%i\n", __func__, cascade_virq);
277 /* ---------------------------------------------------------------------
278 * GPIOLIB hooks
280 #if defined(CONFIG_GPIOLIB)
281 static inline struct mpc52xx_gpt_priv *gc_to_mpc52xx_gpt(struct gpio_chip *gc)
283 return container_of(gc, struct mpc52xx_gpt_priv, gc);
286 static int mpc52xx_gpt_gpio_get(struct gpio_chip *gc, unsigned int gpio)
288 struct mpc52xx_gpt_priv *gpt = gc_to_mpc52xx_gpt(gc);
290 return (in_be32(&gpt->regs->status) >> 8) & 1;
293 static void
294 mpc52xx_gpt_gpio_set(struct gpio_chip *gc, unsigned int gpio, int v)
296 struct mpc52xx_gpt_priv *gpt = gc_to_mpc52xx_gpt(gc);
297 unsigned long flags;
298 u32 r;
300 dev_dbg(gpt->dev, "%s: gpio:%d v:%d\n", __func__, gpio, v);
301 r = v ? MPC52xx_GPT_MODE_GPIO_OUT_HIGH : MPC52xx_GPT_MODE_GPIO_OUT_LOW;
303 spin_lock_irqsave(&gpt->lock, flags);
304 clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_GPIO_MASK, r);
305 spin_unlock_irqrestore(&gpt->lock, flags);
308 static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
310 struct mpc52xx_gpt_priv *gpt = gc_to_mpc52xx_gpt(gc);
311 unsigned long flags;
313 dev_dbg(gpt->dev, "%s: gpio:%d\n", __func__, gpio);
315 spin_lock_irqsave(&gpt->lock, flags);
316 clrbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_GPIO_MASK);
317 spin_unlock_irqrestore(&gpt->lock, flags);
319 return 0;
322 static int
323 mpc52xx_gpt_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
325 mpc52xx_gpt_gpio_set(gc, gpio, val);
326 return 0;
329 static void
330 mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node)
332 int rc;
334 /* Only setup GPIO if the device tree claims the GPT is
335 * a GPIO controller */
336 if (!of_find_property(node, "gpio-controller", NULL))
337 return;
339 gpt->gc.label = kstrdup(node->full_name, GFP_KERNEL);
340 if (!gpt->gc.label) {
341 dev_err(gpt->dev, "out of memory\n");
342 return;
345 gpt->gc.ngpio = 1;
346 gpt->gc.direction_input = mpc52xx_gpt_gpio_dir_in;
347 gpt->gc.direction_output = mpc52xx_gpt_gpio_dir_out;
348 gpt->gc.get = mpc52xx_gpt_gpio_get;
349 gpt->gc.set = mpc52xx_gpt_gpio_set;
350 gpt->gc.base = -1;
351 gpt->gc.of_node = node;
353 /* Setup external pin in GPIO mode */
354 clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_MS_MASK,
355 MPC52xx_GPT_MODE_MS_GPIO);
357 rc = gpiochip_add(&gpt->gc);
358 if (rc)
359 dev_err(gpt->dev, "gpiochip_add() failed; rc=%i\n", rc);
361 dev_dbg(gpt->dev, "%s() complete.\n", __func__);
363 #else /* defined(CONFIG_GPIOLIB) */
364 static void
365 mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *p, struct device_node *np) { }
366 #endif /* defined(CONFIG_GPIOLIB) */
368 /***********************************************************************
369 * Timer API
373 * mpc52xx_gpt_from_irq - Return the GPT device associated with an IRQ number
374 * @irq: irq of timer.
376 struct mpc52xx_gpt_priv *mpc52xx_gpt_from_irq(int irq)
378 struct mpc52xx_gpt_priv *gpt;
379 struct list_head *pos;
381 /* Iterate over the list of timers looking for a matching device */
382 mutex_lock(&mpc52xx_gpt_list_mutex);
383 list_for_each(pos, &mpc52xx_gpt_list) {
384 gpt = container_of(pos, struct mpc52xx_gpt_priv, list);
385 if (gpt->irqhost && irq == irq_linear_revmap(gpt->irqhost, 0)) {
386 mutex_unlock(&mpc52xx_gpt_list_mutex);
387 return gpt;
390 mutex_unlock(&mpc52xx_gpt_list_mutex);
392 return NULL;
394 EXPORT_SYMBOL(mpc52xx_gpt_from_irq);
396 static int mpc52xx_gpt_do_start(struct mpc52xx_gpt_priv *gpt, u64 period,
397 int continuous, int as_wdt)
399 u32 clear, set;
400 u64 clocks;
401 u32 prescale;
402 unsigned long flags;
404 clear = MPC52xx_GPT_MODE_MS_MASK | MPC52xx_GPT_MODE_CONTINUOUS;
405 set = MPC52xx_GPT_MODE_MS_GPIO | MPC52xx_GPT_MODE_COUNTER_ENABLE;
406 if (as_wdt) {
407 clear |= MPC52xx_GPT_MODE_IRQ_EN;
408 set |= MPC52xx_GPT_MODE_WDT_EN;
409 } else if (continuous)
410 set |= MPC52xx_GPT_MODE_CONTINUOUS;
412 /* Determine the number of clocks in the requested period. 64 bit
413 * arithmatic is done here to preserve the precision until the value
414 * is scaled back down into the u32 range. Period is in 'ns', bus
415 * frequency is in Hz. */
416 clocks = period * (u64)gpt->ipb_freq;
417 do_div(clocks, 1000000000); /* Scale it down to ns range */
419 /* This device cannot handle a clock count greater than 32 bits */
420 if (clocks > 0xffffffff)
421 return -EINVAL;
423 /* Calculate the prescaler and count values from the clocks value.
424 * 'clocks' is the number of clock ticks in the period. The timer
425 * has 16 bit precision and a 16 bit prescaler. Prescaler is
426 * calculated by integer dividing the clocks by 0x10000 (shifting
427 * down 16 bits) to obtain the smallest possible divisor for clocks
428 * to get a 16 bit count value.
430 * Note: the prescale register is '1' based, not '0' based. ie. a
431 * value of '1' means divide the clock by one. 0xffff divides the
432 * clock by 0xffff. '0x0000' does not divide by zero, but wraps
433 * around and divides by 0x10000. That is why prescale must be
434 * a u32 variable, not a u16, for this calculation. */
435 prescale = (clocks >> 16) + 1;
436 do_div(clocks, prescale);
437 if (clocks > 0xffff) {
438 pr_err("calculation error; prescale:%x clocks:%llx\n",
439 prescale, clocks);
440 return -EINVAL;
443 /* Set and enable the timer, reject an attempt to use a wdt as gpt */
444 spin_lock_irqsave(&gpt->lock, flags);
445 if (as_wdt)
446 gpt->wdt_mode |= MPC52xx_GPT_IS_WDT;
447 else if ((gpt->wdt_mode & MPC52xx_GPT_IS_WDT) != 0) {
448 spin_unlock_irqrestore(&gpt->lock, flags);
449 return -EBUSY;
451 out_be32(&gpt->regs->count, prescale << 16 | clocks);
452 clrsetbits_be32(&gpt->regs->mode, clear, set);
453 spin_unlock_irqrestore(&gpt->lock, flags);
455 return 0;
459 * mpc52xx_gpt_start_timer - Set and enable the GPT timer
460 * @gpt: Pointer to gpt private data structure
461 * @period: period of timer in ns; max. ~130s @ 33MHz IPB clock
462 * @continuous: set to 1 to make timer continuous free running
464 * An interrupt will be generated every time the timer fires
466 int mpc52xx_gpt_start_timer(struct mpc52xx_gpt_priv *gpt, u64 period,
467 int continuous)
469 return mpc52xx_gpt_do_start(gpt, period, continuous, 0);
471 EXPORT_SYMBOL(mpc52xx_gpt_start_timer);
474 * mpc52xx_gpt_stop_timer - Stop a gpt
475 * @gpt: Pointer to gpt private data structure
477 * Returns an error if attempting to stop a wdt
479 int mpc52xx_gpt_stop_timer(struct mpc52xx_gpt_priv *gpt)
481 unsigned long flags;
483 /* reject the operation if the timer is used as watchdog (gpt 0 only) */
484 spin_lock_irqsave(&gpt->lock, flags);
485 if ((gpt->wdt_mode & MPC52xx_GPT_IS_WDT) != 0) {
486 spin_unlock_irqrestore(&gpt->lock, flags);
487 return -EBUSY;
490 clrbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_COUNTER_ENABLE);
491 spin_unlock_irqrestore(&gpt->lock, flags);
492 return 0;
494 EXPORT_SYMBOL(mpc52xx_gpt_stop_timer);
497 * mpc52xx_gpt_timer_period - Read the timer period
498 * @gpt: Pointer to gpt private data structure
500 * Returns the timer period in ns
502 u64 mpc52xx_gpt_timer_period(struct mpc52xx_gpt_priv *gpt)
504 u64 period;
505 u64 prescale;
506 unsigned long flags;
508 spin_lock_irqsave(&gpt->lock, flags);
509 period = in_be32(&gpt->regs->count);
510 spin_unlock_irqrestore(&gpt->lock, flags);
512 prescale = period >> 16;
513 period &= 0xffff;
514 if (prescale == 0)
515 prescale = 0x10000;
516 period = period * prescale * 1000000000ULL;
517 do_div(period, (u64)gpt->ipb_freq);
518 return period;
520 EXPORT_SYMBOL(mpc52xx_gpt_timer_period);
522 #if defined(CONFIG_MPC5200_WDT)
523 /***********************************************************************
524 * Watchdog API for gpt0
527 #define WDT_IDENTITY "mpc52xx watchdog on GPT0"
529 /* wdt_is_active stores wether or not the /dev/watchdog device is opened */
530 static unsigned long wdt_is_active;
532 /* wdt-capable gpt */
533 static struct mpc52xx_gpt_priv *mpc52xx_gpt_wdt;
535 /* low-level wdt functions */
536 static inline void mpc52xx_gpt_wdt_ping(struct mpc52xx_gpt_priv *gpt_wdt)
538 unsigned long flags;
540 spin_lock_irqsave(&gpt_wdt->lock, flags);
541 out_8((u8 *) &gpt_wdt->regs->mode, MPC52xx_GPT_MODE_WDT_PING);
542 spin_unlock_irqrestore(&gpt_wdt->lock, flags);
545 /* wdt misc device api */
546 static ssize_t mpc52xx_wdt_write(struct file *file, const char __user *data,
547 size_t len, loff_t *ppos)
549 struct mpc52xx_gpt_priv *gpt_wdt = file->private_data;
550 mpc52xx_gpt_wdt_ping(gpt_wdt);
551 return 0;
554 static const struct watchdog_info mpc5200_wdt_info = {
555 .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
556 .identity = WDT_IDENTITY,
559 static long mpc52xx_wdt_ioctl(struct file *file, unsigned int cmd,
560 unsigned long arg)
562 struct mpc52xx_gpt_priv *gpt_wdt = file->private_data;
563 int __user *data = (int __user *)arg;
564 int timeout;
565 u64 real_timeout;
566 int ret = 0;
568 switch (cmd) {
569 case WDIOC_GETSUPPORT:
570 ret = copy_to_user(data, &mpc5200_wdt_info,
571 sizeof(mpc5200_wdt_info));
572 if (ret)
573 ret = -EFAULT;
574 break;
576 case WDIOC_GETSTATUS:
577 case WDIOC_GETBOOTSTATUS:
578 ret = put_user(0, data);
579 break;
581 case WDIOC_KEEPALIVE:
582 mpc52xx_gpt_wdt_ping(gpt_wdt);
583 break;
585 case WDIOC_SETTIMEOUT:
586 ret = get_user(timeout, data);
587 if (ret)
588 break;
589 real_timeout = (u64) timeout * 1000000000ULL;
590 ret = mpc52xx_gpt_do_start(gpt_wdt, real_timeout, 0, 1);
591 if (ret)
592 break;
593 /* fall through and return the timeout */
595 case WDIOC_GETTIMEOUT:
596 /* we need to round here as to avoid e.g. the following
597 * situation:
598 * - timeout requested is 1 second;
599 * - real timeout @33MHz is 999997090ns
600 * - the int divide by 10^9 will return 0.
602 real_timeout =
603 mpc52xx_gpt_timer_period(gpt_wdt) + 500000000ULL;
604 do_div(real_timeout, 1000000000ULL);
605 timeout = (int) real_timeout;
606 ret = put_user(timeout, data);
607 break;
609 default:
610 ret = -ENOTTY;
612 return ret;
615 static int mpc52xx_wdt_open(struct inode *inode, struct file *file)
617 int ret;
619 /* sanity check */
620 if (!mpc52xx_gpt_wdt)
621 return -ENODEV;
623 /* /dev/watchdog can only be opened once */
624 if (test_and_set_bit(0, &wdt_is_active))
625 return -EBUSY;
627 /* Set and activate the watchdog with 30 seconds timeout */
628 ret = mpc52xx_gpt_do_start(mpc52xx_gpt_wdt, 30ULL * 1000000000ULL,
629 0, 1);
630 if (ret) {
631 clear_bit(0, &wdt_is_active);
632 return ret;
635 file->private_data = mpc52xx_gpt_wdt;
636 return nonseekable_open(inode, file);
639 static int mpc52xx_wdt_release(struct inode *inode, struct file *file)
641 /* note: releasing the wdt in NOWAYOUT-mode does not stop it */
642 #if !defined(CONFIG_WATCHDOG_NOWAYOUT)
643 struct mpc52xx_gpt_priv *gpt_wdt = file->private_data;
644 unsigned long flags;
646 spin_lock_irqsave(&gpt_wdt->lock, flags);
647 clrbits32(&gpt_wdt->regs->mode,
648 MPC52xx_GPT_MODE_COUNTER_ENABLE | MPC52xx_GPT_MODE_WDT_EN);
649 gpt_wdt->wdt_mode &= ~MPC52xx_GPT_IS_WDT;
650 spin_unlock_irqrestore(&gpt_wdt->lock, flags);
651 #endif
652 clear_bit(0, &wdt_is_active);
653 return 0;
657 static const struct file_operations mpc52xx_wdt_fops = {
658 .owner = THIS_MODULE,
659 .llseek = no_llseek,
660 .write = mpc52xx_wdt_write,
661 .unlocked_ioctl = mpc52xx_wdt_ioctl,
662 .open = mpc52xx_wdt_open,
663 .release = mpc52xx_wdt_release,
666 static struct miscdevice mpc52xx_wdt_miscdev = {
667 .minor = WATCHDOG_MINOR,
668 .name = "watchdog",
669 .fops = &mpc52xx_wdt_fops,
672 static int __devinit mpc52xx_gpt_wdt_init(void)
674 int err;
676 /* try to register the watchdog misc device */
677 err = misc_register(&mpc52xx_wdt_miscdev);
678 if (err)
679 pr_err("%s: cannot register watchdog device\n", WDT_IDENTITY);
680 else
681 pr_info("%s: watchdog device registered\n", WDT_IDENTITY);
682 return err;
685 static int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt,
686 const u32 *period)
688 u64 real_timeout;
690 /* remember the gpt for the wdt operation */
691 mpc52xx_gpt_wdt = gpt;
693 /* configure the wdt if the device tree contained a timeout */
694 if (!period || *period == 0)
695 return 0;
697 real_timeout = (u64) *period * 1000000000ULL;
698 if (mpc52xx_gpt_do_start(gpt, real_timeout, 0, 1))
699 dev_warn(gpt->dev, "starting as wdt failed\n");
700 else
701 dev_info(gpt->dev, "watchdog set to %us timeout\n", *period);
702 return 0;
705 #else
707 static int __devinit mpc52xx_gpt_wdt_init(void)
709 return 0;
712 static inline int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt,
713 const u32 *period)
715 return 0;
718 #endif /* CONFIG_MPC5200_WDT */
720 /* ---------------------------------------------------------------------
721 * of_platform bus binding code
723 static int __devinit mpc52xx_gpt_probe(struct platform_device *ofdev,
724 const struct of_device_id *match)
726 struct mpc52xx_gpt_priv *gpt;
728 gpt = kzalloc(sizeof *gpt, GFP_KERNEL);
729 if (!gpt)
730 return -ENOMEM;
732 spin_lock_init(&gpt->lock);
733 gpt->dev = &ofdev->dev;
734 gpt->ipb_freq = mpc5xxx_get_bus_frequency(ofdev->dev.of_node);
735 gpt->regs = of_iomap(ofdev->dev.of_node, 0);
736 if (!gpt->regs) {
737 kfree(gpt);
738 return -ENOMEM;
741 dev_set_drvdata(&ofdev->dev, gpt);
743 mpc52xx_gpt_gpio_setup(gpt, ofdev->dev.of_node);
744 mpc52xx_gpt_irq_setup(gpt, ofdev->dev.of_node);
746 mutex_lock(&mpc52xx_gpt_list_mutex);
747 list_add(&gpt->list, &mpc52xx_gpt_list);
748 mutex_unlock(&mpc52xx_gpt_list_mutex);
750 /* check if this device could be a watchdog */
751 if (of_get_property(ofdev->dev.of_node, "fsl,has-wdt", NULL) ||
752 of_get_property(ofdev->dev.of_node, "has-wdt", NULL)) {
753 const u32 *on_boot_wdt;
755 gpt->wdt_mode = MPC52xx_GPT_CAN_WDT;
756 on_boot_wdt = of_get_property(ofdev->dev.of_node,
757 "fsl,wdt-on-boot", NULL);
758 if (on_boot_wdt) {
759 dev_info(gpt->dev, "used as watchdog\n");
760 gpt->wdt_mode |= MPC52xx_GPT_IS_WDT;
761 } else
762 dev_info(gpt->dev, "can function as watchdog\n");
763 mpc52xx_gpt_wdt_setup(gpt, on_boot_wdt);
766 return 0;
769 static int mpc52xx_gpt_remove(struct platform_device *ofdev)
771 return -EBUSY;
774 static const struct of_device_id mpc52xx_gpt_match[] = {
775 { .compatible = "fsl,mpc5200-gpt", },
777 /* Depreciated compatible values; don't use for new dts files */
778 { .compatible = "fsl,mpc5200-gpt-gpio", },
779 { .compatible = "mpc5200-gpt", },
783 static struct of_platform_driver mpc52xx_gpt_driver = {
784 .driver = {
785 .name = "mpc52xx-gpt",
786 .owner = THIS_MODULE,
787 .of_match_table = mpc52xx_gpt_match,
789 .probe = mpc52xx_gpt_probe,
790 .remove = mpc52xx_gpt_remove,
793 static int __init mpc52xx_gpt_init(void)
795 if (of_register_platform_driver(&mpc52xx_gpt_driver))
796 pr_err("error registering MPC52xx GPT driver\n");
798 return 0;
801 /* Make sure GPIOs and IRQs get set up before anyone tries to use them */
802 subsys_initcall(mpc52xx_gpt_init);
803 device_initcall(mpc52xx_gpt_wdt_init);