release/src-rt-6.x.4708/linux/linux-2.6.36/arch/mips/cavium-octeon/serial.c

   1 /*
   2  * This file is subject to the terms and conditions of the GNU General Public
   3  * License.  See the file "COPYING" in the main directory of this archive
   4  * for more details.
   5  *
   6  * Copyright (C) 2004-2007 Cavium Networks
   7  */
   8 #include <linux/console.h>
   9 #include <linux/module.h>
  10 #include <linux/init.h>
  11 #include <linux/platform_device.h>
  12 #include <linux/serial.h>
  13 #include <linux/serial_8250.h>
  14 #include <linux/serial_reg.h>
  15 #include <linux/tty.h>
  16
  17 #include <asm/time.h>
  18
  19 #include <asm/octeon/octeon.h>
  20
  21 #define DEBUG_UART 1
  22
  23 unsigned int octeon_serial_in(struct uart_port *up, int offset)
  24 {
  25         int rv = cvmx_read_csr((uint64_t)(up->membase + (offset << 3)));
  26         if (offset == UART_IIR && (rv & 0xf) == 7) {
  27                 /* Busy interrupt, read the USR (39) and try again. */
  28                 cvmx_read_csr((uint64_t)(up->membase + (39 << 3)));
  29                 rv = cvmx_read_csr((uint64_t)(up->membase + (offset << 3)));
  30         }
  31         return rv;
  32 }
  33
  34 void octeon_serial_out(struct uart_port *up, int offset, int value)
  35 {
  36         /*
  37          * If bits 6 or 7 of the OCTEON UART's LCR are set, it quits
  38          * working.
  39          */
  40         if (offset == UART_LCR)
  41                 value &= 0x9f;
  42         cvmx_write_csr((uint64_t)(up->membase + (offset << 3)), (u8)value);
  43 }
  44
  45 /*
  46  * Allocated in .bss, so it is all zeroed.
  47  */
  48 #define OCTEON_MAX_UARTS 3
  49 static struct plat_serial8250_port octeon_uart8250_data[OCTEON_MAX_UARTS + 1];
  50 static struct platform_device octeon_uart8250_device = {
  51         .name                   = "serial8250",
  52         .id                     = PLAT8250_DEV_PLATFORM,
  53         .dev                    = {
  54                 .platform_data  = octeon_uart8250_data,
  55         },
  56 };
  57
  58 static void __init octeon_uart_set_common(struct plat_serial8250_port *p)
  59 {
  60         p->flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
  61         p->type = PORT_OCTEON;
  62         p->iotype = UPIO_MEM;
  63         p->regshift = 3;        /* I/O addresses are every 8 bytes */
  64         if (octeon_is_simulation())
  65                 /* Make simulator output fast*/
  66                 p->uartclk = 115200 * 16;
  67         else
  68                 p->uartclk = mips_hpt_frequency;
  69         p->serial_in = octeon_serial_in;
  70         p->serial_out = octeon_serial_out;
  71 }
  72
  73 static int __init octeon_serial_init(void)
  74 {
  75         int enable_uart0;
  76         int enable_uart1;
  77         int enable_uart2;
  78         struct plat_serial8250_port *p;
  79
  80 #ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
  81         /*
  82          * If we are configured to run as the second of two kernels,
  83          * disable uart0 and enable uart1. Uart0 is owned by the first
  84          * kernel
  85          */
  86         enable_uart0 = 0;
  87         enable_uart1 = 1;
  88 #else
  89         /*
  90          * We are configured for the first kernel. We'll enable uart0
  91          * if the bootloader told us to use 0, otherwise will enable
  92          * uart 1.
  93          */
  94         enable_uart0 = (octeon_get_boot_uart() == 0);
  95         enable_uart1 = (octeon_get_boot_uart() == 1);
  96 #ifdef CONFIG_KGDB
  97         enable_uart1 = 1;
  98 #endif
  99 #endif
 100
 101         /* Right now CN52XX is the only chip with a third uart */
 102         enable_uart2 = OCTEON_IS_MODEL(OCTEON_CN52XX);
 103
 104         p = octeon_uart8250_data;
 105         if (enable_uart0) {
 106                 /* Add a ttyS device for hardware uart 0 */
 107                 octeon_uart_set_common(p);
 108                 p->membase = (void *) CVMX_MIO_UARTX_RBR(0);
 109                 p->mapbase = CVMX_MIO_UARTX_RBR(0) & ((1ull << 49) - 1);
 110                 p->irq = OCTEON_IRQ_UART0;
 111                 p++;
 112         }
 113
 114         if (enable_uart1) {
 115                 /* Add a ttyS device for hardware uart 1 */
 116                 octeon_uart_set_common(p);
 117                 p->membase = (void *) CVMX_MIO_UARTX_RBR(1);
 118                 p->mapbase = CVMX_MIO_UARTX_RBR(1) & ((1ull << 49) - 1);
 119                 p->irq = OCTEON_IRQ_UART1;
 120                 p++;
 121         }
 122         if (enable_uart2) {
 123                 /* Add a ttyS device for hardware uart 2 */
 124                 octeon_uart_set_common(p);
 125                 p->membase = (void *) CVMX_MIO_UART2_RBR;
 126                 p->mapbase = CVMX_MIO_UART2_RBR & ((1ull << 49) - 1);
 127                 p->irq = OCTEON_IRQ_UART2;
 128                 p++;
 129         }
 130
 131         BUG_ON(p > &octeon_uart8250_data[OCTEON_MAX_UARTS]);
 132
 133         return platform_device_register(&octeon_uart8250_device);
 134 }
 135
 136 device_initcall(octeon_serial_init);