GUI: Fix Tomato RAF theme for all builds. Compilation typo.
[tomato.git] / release / src-rt-6.x.4708 / linux / linux-2.6.36 / arch / m68k / mac / macints.c
bloba59e09846dbe086381a3870857757b21af886ae2
1 /*
2 * Macintosh interrupts
4 * General design:
5 * In contrary to the Amiga and Atari platforms, the Mac hardware seems to
6 * exclusively use the autovector interrupts (the 'generic level0-level7'
7 * interrupts with exception vectors 0x19-0x1f). The following interrupt levels
8 * are used:
9 * 1 - VIA1
10 * - slot 0: one second interrupt (CA2)
11 * - slot 1: VBlank (CA1)
12 * - slot 2: ADB data ready (SR full)
13 * - slot 3: ADB data (CB2)
14 * - slot 4: ADB clock (CB1)
15 * - slot 5: timer 2
16 * - slot 6: timer 1
17 * - slot 7: status of IRQ; signals 'any enabled int.'
19 * 2 - VIA2 or RBV
20 * - slot 0: SCSI DRQ (CA2)
21 * - slot 1: NUBUS IRQ (CA1) need to read port A to find which
22 * - slot 2: /EXP IRQ (only on IIci)
23 * - slot 3: SCSI IRQ (CB2)
24 * - slot 4: ASC IRQ (CB1)
25 * - slot 5: timer 2 (not on IIci)
26 * - slot 6: timer 1 (not on IIci)
27 * - slot 7: status of IRQ; signals 'any enabled int.'
29 * 2 - OSS (IIfx only?)
30 * - slot 0: SCSI interrupt
31 * - slot 1: Sound interrupt
33 * Levels 3-6 vary by machine type. For VIA or RBV Macintoshes:
35 * 3 - unused (?)
37 * 4 - SCC
39 * 5 - unused (?)
40 * [serial errors or special conditions seem to raise level 6
41 * interrupts on some models (LC4xx?)]
43 * 6 - off switch (?)
45 * For OSS Macintoshes (IIfx only at this point):
47 * 3 - Nubus interrupt
48 * - slot 0: Slot $9
49 * - slot 1: Slot $A
50 * - slot 2: Slot $B
51 * - slot 3: Slot $C
52 * - slot 4: Slot $D
53 * - slot 5: Slot $E
55 * 4 - SCC IOP
57 * 5 - ISM IOP (ADB?)
59 * 6 - unused
61 * For PSC Macintoshes (660AV, 840AV):
63 * 3 - PSC level 3
64 * - slot 0: MACE
66 * 4 - PSC level 4
67 * - slot 1: SCC channel A interrupt
68 * - slot 2: SCC channel B interrupt
69 * - slot 3: MACE DMA
71 * 5 - PSC level 5
73 * 6 - PSC level 6
75 * Finally we have good 'ole level 7, the non-maskable interrupt:
77 * 7 - NMI (programmer's switch on the back of some Macs)
78 * Also RAM parity error on models which support it (IIc, IIfx?)
80 * The current interrupt logic looks something like this:
82 * - We install dispatchers for the autovector interrupts (1-7). These
83 * dispatchers are responsible for querying the hardware (the
84 * VIA/RBV/OSS/PSC chips) to determine the actual interrupt source. Using
85 * this information a machspec interrupt number is generated by placing the
86 * index of the interrupt hardware into the low three bits and the original
87 * autovector interrupt number in the upper 5 bits. The handlers for the
88 * resulting machspec interrupt are then called.
90 * - Nubus is a special case because its interrupts are hidden behind two
91 * layers of hardware. Nubus interrupts come in as index 1 on VIA #2,
92 * which translates to IRQ number 17. In this spot we install _another_
93 * dispatcher. This dispatcher finds the interrupting slot number (9-F) and
94 * then forms a new machspec interrupt number as above with the slot number
95 * minus 9 in the low three bits and the pseudo-level 7 in the upper five
96 * bits. The handlers for this new machspec interrupt number are then
97 * called. This puts Nubus interrupts into the range 56-62.
99 * - The Baboon interrupts (used on some PowerBooks) are an even more special
100 * case. They're hidden behind the Nubus slot $C interrupt thus adding a
101 * third layer of indirection. Why oh why did the Apple engineers do that?
103 * - We support "fast" and "slow" handlers, just like the Amiga port. The
104 * fast handlers are called first and with all interrupts disabled. They
105 * are expected to execute quickly (hence the name). The slow handlers are
106 * called last with interrupts enabled and the interrupt level restored.
107 * They must therefore be reentrant.
109 * TODO:
113 #include <linux/module.h>
114 #include <linux/types.h>
115 #include <linux/kernel.h>
116 #include <linux/sched.h>
117 #include <linux/kernel_stat.h>
118 #include <linux/interrupt.h> /* for intr_count */
119 #include <linux/delay.h>
120 #include <linux/seq_file.h>
122 #include <asm/system.h>
123 #include <asm/irq.h>
124 #include <asm/traps.h>
125 #include <asm/bootinfo.h>
126 #include <asm/macintosh.h>
127 #include <asm/mac_via.h>
128 #include <asm/mac_psc.h>
129 #include <asm/hwtest.h>
130 #include <asm/errno.h>
131 #include <asm/macints.h>
132 #include <asm/irq_regs.h>
133 #include <asm/mac_oss.h>
135 #define SHUTUP_SONIC
138 * VIA/RBV hooks
141 extern void via_register_interrupts(void);
142 extern void via_irq_enable(int);
143 extern void via_irq_disable(int);
144 extern void via_irq_clear(int);
145 extern int via_irq_pending(int);
148 * OSS hooks
151 extern void oss_register_interrupts(void);
152 extern void oss_irq_enable(int);
153 extern void oss_irq_disable(int);
154 extern void oss_irq_clear(int);
155 extern int oss_irq_pending(int);
158 * PSC hooks
161 extern void psc_register_interrupts(void);
162 extern void psc_irq_enable(int);
163 extern void psc_irq_disable(int);
164 extern void psc_irq_clear(int);
165 extern int psc_irq_pending(int);
168 * IOP hooks
171 extern void iop_register_interrupts(void);
174 * Baboon hooks
177 extern int baboon_present;
179 extern void baboon_register_interrupts(void);
180 extern void baboon_irq_enable(int);
181 extern void baboon_irq_disable(int);
182 extern void baboon_irq_clear(int);
185 * console_loglevel determines NMI handler function
188 irqreturn_t mac_nmi_handler(int, void *);
189 irqreturn_t mac_debug_handler(int, void *);
191 /* #define DEBUG_MACINTS */
193 void mac_enable_irq(unsigned int irq);
194 void mac_disable_irq(unsigned int irq);
196 static struct irq_controller mac_irq_controller = {
197 .name = "mac",
198 .lock = __SPIN_LOCK_UNLOCKED(mac_irq_controller.lock),
199 .enable = mac_enable_irq,
200 .disable = mac_disable_irq,
203 void __init mac_init_IRQ(void)
205 #ifdef DEBUG_MACINTS
206 printk("mac_init_IRQ(): Setting things up...\n");
207 #endif
208 m68k_setup_irq_controller(&mac_irq_controller, IRQ_USER,
209 NUM_MAC_SOURCES - IRQ_USER);
210 /* Make sure the SONIC interrupt is cleared or things get ugly */
211 #ifdef SHUTUP_SONIC
212 printk("Killing onboard sonic... ");
213 /* This address should hopefully be mapped already */
214 if (hwreg_present((void*)(0x50f0a000))) {
215 *(long *)(0x50f0a014) = 0x7fffL;
216 *(long *)(0x50f0a010) = 0L;
218 printk("Done.\n");
219 #endif /* SHUTUP_SONIC */
222 * Now register the handlers for the master IRQ handlers
223 * at levels 1-7. Most of the work is done elsewhere.
226 if (oss_present)
227 oss_register_interrupts();
228 else
229 via_register_interrupts();
230 if (psc_present)
231 psc_register_interrupts();
232 if (baboon_present)
233 baboon_register_interrupts();
234 iop_register_interrupts();
235 if (request_irq(IRQ_AUTO_7, mac_nmi_handler, 0, "NMI",
236 mac_nmi_handler))
237 pr_err("Couldn't register NMI\n");
238 #ifdef DEBUG_MACINTS
239 printk("mac_init_IRQ(): Done!\n");
240 #endif
244 * mac_enable_irq - enable an interrupt source
245 * mac_disable_irq - disable an interrupt source
246 * mac_clear_irq - clears a pending interrupt
247 * mac_pending_irq - Returns the pending status of an IRQ (nonzero = pending)
249 * These routines are just dispatchers to the VIA/OSS/PSC routines.
252 void mac_enable_irq(unsigned int irq)
254 int irq_src = IRQ_SRC(irq);
256 switch(irq_src) {
257 case 1:
258 via_irq_enable(irq);
259 break;
260 case 2:
261 case 7:
262 if (oss_present)
263 oss_irq_enable(irq);
264 else
265 via_irq_enable(irq);
266 break;
267 case 3:
268 case 5:
269 case 6:
270 if (psc_present)
271 psc_irq_enable(irq);
272 else if (oss_present)
273 oss_irq_enable(irq);
274 break;
275 case 4:
276 if (psc_present)
277 psc_irq_enable(irq);
278 break;
279 case 8:
280 if (baboon_present)
281 baboon_irq_enable(irq);
282 break;
286 void mac_disable_irq(unsigned int irq)
288 int irq_src = IRQ_SRC(irq);
290 switch(irq_src) {
291 case 1:
292 via_irq_disable(irq);
293 break;
294 case 2:
295 case 7:
296 if (oss_present)
297 oss_irq_disable(irq);
298 else
299 via_irq_disable(irq);
300 break;
301 case 3:
302 case 5:
303 case 6:
304 if (psc_present)
305 psc_irq_disable(irq);
306 else if (oss_present)
307 oss_irq_disable(irq);
308 break;
309 case 4:
310 if (psc_present)
311 psc_irq_disable(irq);
312 break;
313 case 8:
314 if (baboon_present)
315 baboon_irq_disable(irq);
316 break;
320 void mac_clear_irq(unsigned int irq)
322 switch(IRQ_SRC(irq)) {
323 case 1:
324 via_irq_clear(irq);
325 break;
326 case 2:
327 case 7:
328 if (oss_present)
329 oss_irq_clear(irq);
330 else
331 via_irq_clear(irq);
332 break;
333 case 3:
334 case 5:
335 case 6:
336 if (psc_present)
337 psc_irq_clear(irq);
338 else if (oss_present)
339 oss_irq_clear(irq);
340 break;
341 case 4:
342 if (psc_present)
343 psc_irq_clear(irq);
344 break;
345 case 8:
346 if (baboon_present)
347 baboon_irq_clear(irq);
348 break;
352 int mac_irq_pending(unsigned int irq)
354 switch(IRQ_SRC(irq)) {
355 case 1:
356 return via_irq_pending(irq);
357 case 2:
358 case 7:
359 if (oss_present)
360 return oss_irq_pending(irq);
361 else
362 return via_irq_pending(irq);
363 case 3:
364 case 5:
365 case 6:
366 if (psc_present)
367 return psc_irq_pending(irq);
368 else if (oss_present)
369 return oss_irq_pending(irq);
370 break;
371 case 4:
372 if (psc_present)
373 psc_irq_pending(irq);
374 break;
376 return 0;
378 EXPORT_SYMBOL(mac_irq_pending);
380 static int num_debug[8];
382 irqreturn_t mac_debug_handler(int irq, void *dev_id)
384 if (num_debug[irq] < 10) {
385 printk("DEBUG: Unexpected IRQ %d\n", irq);
386 num_debug[irq]++;
388 return IRQ_HANDLED;
391 static int in_nmi;
392 static volatile int nmi_hold;
394 irqreturn_t mac_nmi_handler(int irq, void *dev_id)
396 int i;
398 * generate debug output on NMI switch if 'debug' kernel option given
399 * (only works with Penguin!)
402 in_nmi++;
403 for (i=0; i<100; i++)
404 udelay(1000);
406 if (in_nmi == 1) {
407 nmi_hold = 1;
408 printk("... pausing, press NMI to resume ...");
409 } else {
410 printk(" ok!\n");
411 nmi_hold = 0;
414 barrier();
416 while (nmi_hold == 1)
417 udelay(1000);
419 if (console_loglevel >= 8) {
420 /* printk("NMI "); */
422 in_nmi--;
423 return IRQ_HANDLED;