release/src-rt-6.x.4708/linux/linux-2.6.36/arch/arm/plat-orion/gpio.c

   1 /*
   2  * arch/arm/plat-orion/gpio.c
   3  *
   4  * Marvell Orion SoC GPIO handling.
   5  *
   6  * This file is licensed under the terms of the GNU General Public
   7  * License version 2.  This program is licensed "as is" without any
   8  * warranty of any kind, whether express or implied.
   9  */
  10
  11 #include <linux/kernel.h>
  12 #include <linux/init.h>
  13 #include <linux/irq.h>
  14 #include <linux/module.h>
  15 #include <linux/spinlock.h>
  16 #include <linux/bitops.h>
  17 #include <linux/io.h>
  18 #include <linux/gpio.h>
  19
  20 static DEFINE_SPINLOCK(gpio_lock);
  21 static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)];
  22 static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)];
  23
  24 static inline void __set_direction(unsigned pin, int input)
  25 {
  26         u32 u;
  27
  28         u = readl(GPIO_IO_CONF(pin));
  29         if (input)
  30                 u |= 1 << (pin & 31);
  31         else
  32                 u &= ~(1 << (pin & 31));
  33         writel(u, GPIO_IO_CONF(pin));
  34 }
  35
  36 static void __set_level(unsigned pin, int high)
  37 {
  38         u32 u;
  39
  40         u = readl(GPIO_OUT(pin));
  41         if (high)
  42                 u |= 1 << (pin & 31);
  43         else
  44                 u &= ~(1 << (pin & 31));
  45         writel(u, GPIO_OUT(pin));
  46 }
  47
  48 static inline void __set_blinking(unsigned pin, int blink)
  49 {
  50         u32 u;
  51
  52         u = readl(GPIO_BLINK_EN(pin));
  53         if (blink)
  54                 u |= 1 << (pin & 31);
  55         else
  56                 u &= ~(1 << (pin & 31));
  57         writel(u, GPIO_BLINK_EN(pin));
  58 }
  59
  60 static inline int orion_gpio_is_valid(unsigned pin, int mode)
  61 {
  62         if (pin < GPIO_MAX) {
  63                 if ((mode & GPIO_INPUT_OK) && !test_bit(pin, gpio_valid_input))
  64                         goto err_out;
  65                 if ((mode & GPIO_OUTPUT_OK) && !test_bit(pin, gpio_valid_output))
  66                         goto err_out;
  67                 return true;
  68         }
  69
  70 err_out:
  71         pr_debug("%s: invalid GPIO %d\n", __func__, pin);
  72         return false;
  73 }
  74
  75 /*
  76  * GENERIC_GPIO primitives.
  77  */
  78 static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
  79 {
  80         unsigned long flags;
  81
  82         if (!orion_gpio_is_valid(pin, GPIO_INPUT_OK))
  83                 return -EINVAL;
  84
  85         spin_lock_irqsave(&gpio_lock, flags);
  86
  87         /* Configure GPIO direction. */
  88         __set_direction(pin, 1);
  89
  90         spin_unlock_irqrestore(&gpio_lock, flags);
  91
  92         return 0;
  93 }
  94
  95 static int orion_gpio_get_value(struct gpio_chip *chip, unsigned pin)
  96 {
  97         int val;
  98
  99         if (readl(GPIO_IO_CONF(pin)) & (1 << (pin & 31)))
 100                 val = readl(GPIO_DATA_IN(pin)) ^ readl(GPIO_IN_POL(pin));
 101         else
 102                 val = readl(GPIO_OUT(pin));
 103
 104         return (val >> (pin & 31)) & 1;
 105 }
 106
 107 static int orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin,
 108         int value)
 109 {
 110         unsigned long flags;
 111
 112         if (!orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
 113                 return -EINVAL;
 114
 115         spin_lock_irqsave(&gpio_lock, flags);
 116
 117         /* Disable blinking. */
 118         __set_blinking(pin, 0);
 119
 120         /* Configure GPIO output value. */
 121         __set_level(pin, value);
 122
 123         /* Configure GPIO direction. */
 124         __set_direction(pin, 0);
 125
 126         spin_unlock_irqrestore(&gpio_lock, flags);
 127
 128         return 0;
 129 }
 130
 131 static void orion_gpio_set_value(struct gpio_chip *chip, unsigned pin,
 132         int value)
 133 {
 134         unsigned long flags;
 135
 136         spin_lock_irqsave(&gpio_lock, flags);
 137
 138         /* Configure GPIO output value. */
 139         __set_level(pin, value);
 140
 141         spin_unlock_irqrestore(&gpio_lock, flags);
 142 }
 143
 144 static int orion_gpio_request(struct gpio_chip *chip, unsigned pin)
 145 {
 146         if (orion_gpio_is_valid(pin, GPIO_INPUT_OK) ||
 147             orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
 148                 return 0;
 149         return -EINVAL;
 150 }
 151
 152 static struct gpio_chip orion_gpiochip = {
 153         .label                  = "orion_gpio",
 154         .direction_input        = orion_gpio_direction_input,
 155         .get                    = orion_gpio_get_value,
 156         .direction_output       = orion_gpio_direction_output,
 157         .set                    = orion_gpio_set_value,
 158         .request                = orion_gpio_request,
 159         .base                   = 0,
 160         .ngpio                  = GPIO_MAX,
 161         .can_sleep              = 0,
 162 };
 163
 164 void __init orion_gpio_init(void)
 165 {
 166         gpiochip_add(&orion_gpiochip);
 167 }
 168
 169 /*
 170  * Orion-specific GPIO API extensions.
 171  */
 172 void __init orion_gpio_set_unused(unsigned pin)
 173 {
 174         /* Configure as output, drive low. */
 175         __set_level(pin, 0);
 176         __set_direction(pin, 0);
 177 }
 178
 179 void __init orion_gpio_set_valid(unsigned pin, int mode)
 180 {
 181         if (mode == 1)
 182                 mode = GPIO_INPUT_OK | GPIO_OUTPUT_OK;
 183         if (mode & GPIO_INPUT_OK)
 184                 __set_bit(pin, gpio_valid_input);
 185         else
 186                 __clear_bit(pin, gpio_valid_input);
 187         if (mode & GPIO_OUTPUT_OK)
 188                 __set_bit(pin, gpio_valid_output);
 189         else
 190                 __clear_bit(pin, gpio_valid_output);
 191 }
 192
 193 void orion_gpio_set_blink(unsigned pin, int blink)
 194 {
 195         unsigned long flags;
 196
 197         spin_lock_irqsave(&gpio_lock, flags);
 198
 199         /* Set output value to zero. */
 200         __set_level(pin, 0);
 201
 202         /* Set blinking. */
 203         __set_blinking(pin, blink);
 204
 205         spin_unlock_irqrestore(&gpio_lock, flags);
 206 }
 207 EXPORT_SYMBOL(orion_gpio_set_blink);
 208
 209
 210 /*****************************************************************************
 211  * Orion GPIO IRQ
 212  *
 213  * GPIO_IN_POL register controls whether GPIO_DATA_IN will hold the same
 214  * value of the line or the opposite value.
 215  *
 216  * Level IRQ handlers: DATA_IN is used directly as cause register.
 217  *                     Interrupt are masked by LEVEL_MASK registers.
 218  * Edge IRQ handlers:  Change in DATA_IN are latched in EDGE_CAUSE.
 219  *                     Interrupt are masked by EDGE_MASK registers.
 220  * Both-edge handlers: Similar to regular Edge handlers, but also swaps
 221  *                     the polarity to catch the next line transaction.
 222  *                     This is a race condition that might not perfectly
 223  *                     work on some use cases.
 224  *
 225  * Every eight GPIO lines are grouped (OR'ed) before going up to main
 226  * cause register.
 227  *
 228  *                    EDGE  cause    mask
 229  *        data-in   /--------| |-----| |----\
 230  *     -----| |-----                         ---- to main cause reg
 231  *           X      \----------------| |----/
 232  *        polarity    LEVEL          mask
 233  *
 234  ****************************************************************************/
 235
 236 static void gpio_irq_ack(u32 irq)
 237 {
 238         int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
 239         if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
 240                 int pin = irq_to_gpio(irq);
 241                 writel(~(1 << (pin & 31)), GPIO_EDGE_CAUSE(pin));
 242         }
 243 }
 244
 245 static void gpio_irq_mask(u32 irq)
 246 {
 247         int pin = irq_to_gpio(irq);
 248         int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
 249         u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
 250                 GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
 251         u32 u = readl(reg);
 252         u &= ~(1 << (pin & 31));
 253         writel(u, reg);
 254 }
 255
 256 static void gpio_irq_unmask(u32 irq)
 257 {
 258         int pin = irq_to_gpio(irq);
 259         int type = irq_desc[irq].status & IRQ_TYPE_SENSE_MASK;
 260         u32 reg = (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) ?
 261                 GPIO_EDGE_MASK(pin) : GPIO_LEVEL_MASK(pin);
 262         u32 u = readl(reg);
 263         u |= 1 << (pin & 31);
 264         writel(u, reg);
 265 }
 266
 267 static int gpio_irq_set_type(u32 irq, u32 type)
 268 {
 269         int pin = irq_to_gpio(irq);
 270         struct irq_desc *desc;
 271         u32 u;
 272
 273         u = readl(GPIO_IO_CONF(pin)) & (1 << (pin & 31));
 274         if (!u) {
 275                 printk(KERN_ERR "orion gpio_irq_set_type failed "
 276                                 "(irq %d, pin %d).\n", irq, pin);
 277                 return -EINVAL;
 278         }
 279
 280         desc = irq_desc + irq;
 281
 282         /*
 283          * Set edge/level type.
 284          */
 285         if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
 286                 desc->handle_irq = handle_edge_irq;
 287         } else if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
 288                 desc->handle_irq = handle_level_irq;
 289         } else {
 290                 printk(KERN_ERR "failed to set irq=%d (type=%d)\n", irq, type);
 291                 return -EINVAL;
 292         }
 293
 294         /*
 295          * Configure interrupt polarity.
 296          */
 297         if (type == IRQ_TYPE_EDGE_RISING || type == IRQ_TYPE_LEVEL_HIGH) {
 298                 u = readl(GPIO_IN_POL(pin));
 299                 u &= ~(1 << (pin & 31));
 300                 writel(u, GPIO_IN_POL(pin));
 301         } else if (type == IRQ_TYPE_EDGE_FALLING || type == IRQ_TYPE_LEVEL_LOW) {
 302                 u = readl(GPIO_IN_POL(pin));
 303                 u |= 1 << (pin & 31);
 304                 writel(u, GPIO_IN_POL(pin));
 305         } else if (type == IRQ_TYPE_EDGE_BOTH) {
 306                 u32 v;
 307
 308                 v = readl(GPIO_IN_POL(pin)) ^ readl(GPIO_DATA_IN(pin));
 309
 310                 /*
 311                  * set initial polarity based on current input level
 312                  */
 313                 u = readl(GPIO_IN_POL(pin));
 314                 if (v & (1 << (pin & 31)))
 315                         u |= 1 << (pin & 31);           /* falling */
 316                 else
 317                         u &= ~(1 << (pin & 31));        /* rising */
 318                 writel(u, GPIO_IN_POL(pin));
 319         }
 320
 321         desc->status = (desc->status & ~IRQ_TYPE_SENSE_MASK) | type;
 322
 323         return 0;
 324 }
 325
 326 struct irq_chip orion_gpio_irq_chip = {
 327         .name           = "orion_gpio_irq",
 328         .ack            = gpio_irq_ack,
 329         .mask           = gpio_irq_mask,
 330         .unmask         = gpio_irq_unmask,
 331         .set_type       = gpio_irq_set_type,
 332 };
 333
 334 void orion_gpio_irq_handler(int pinoff)
 335 {
 336         u32 cause;
 337         int pin;
 338
 339         cause = readl(GPIO_DATA_IN(pinoff)) & readl(GPIO_LEVEL_MASK(pinoff));
 340         cause |= readl(GPIO_EDGE_CAUSE(pinoff)) & readl(GPIO_EDGE_MASK(pinoff));
 341
 342         for (pin = pinoff; pin < pinoff + 8; pin++) {
 343                 int irq = gpio_to_irq(pin);
 344                 struct irq_desc *desc = irq_desc + irq;
 345
 346                 if (!(cause & (1 << (pin & 31))))
 347                         continue;
 348
 349                 if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
 350                         /* Swap polarity (race with GPIO line) */
 351                         u32 polarity;
 352
 353                         polarity = readl(GPIO_IN_POL(pin));
 354                         polarity ^= 1 << (pin & 31);
 355                         writel(polarity, GPIO_IN_POL(pin));
 356                 }
 357                 desc_handle_irq(irq, desc);
 358         }
 359 }